ARM: dts: add Kverneland TGO board
VICTGO is the Kverneland TGO IsoBus universal terminal for agricultural applications on tractors Co-Developed-by: David Jander <david@protonic.nl> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Oleksij Rempel
Shawn Guo
Родитель
db8c29bae6
Коммит
7f8f6311ba
|
|
@ -490,6 +490,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
|
|||
imx6dl-tx6u-811x.dtb \
|
||||
imx6dl-tx6u-81xx-mb7.dtb \
|
||||
imx6dl-udoo.dtb \
|
||||
imx6dl-victgo.dtb \
|
||||
imx6dl-vicut1.dtb \
|
||||
imx6dl-wandboard.dtb \
|
||||
imx6dl-wandboard-revb1.dtb \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,852 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright (c) 2016 Protonic Holland
|
||||
* Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/display/sdtv-standards.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/media/tvp5150.h>
|
||||
#include <dt-bindings/sound/fsl-imx-audmux.h>
|
||||
#include "imx6dl.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Kverneland TGO";
|
||||
compatible = "kvg,victgo", "fsl,imx6dl";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart4;
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_backlight>;
|
||||
pwms = <&pwm1 0 5000000 0>;
|
||||
brightness-levels = <0 16 64 255>;
|
||||
num-interpolated-steps = <16>;
|
||||
default-brightness-level = <1>;
|
||||
power-supply = <®_3v3>;
|
||||
enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
connector {
|
||||
compatible = "composite-video-connector";
|
||||
label = "Composite0";
|
||||
sdtv-standards = <SDTV_STD_PAL_B>;
|
||||
|
||||
port {
|
||||
comp0_out: endpoint {
|
||||
remote-endpoint = <&tvp5150_comp0_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_gpiokeys>;
|
||||
autorepeat;
|
||||
|
||||
power {
|
||||
label = "Power Button";
|
||||
gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_POWER>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
enter {
|
||||
label = "Rotary Key";
|
||||
gpios = <&gpio2 05 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_ENTER>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_leds>;
|
||||
|
||||
led-0 {
|
||||
label = "debug0";
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
led-1 {
|
||||
label = "debug1";
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "disk-activity";
|
||||
};
|
||||
|
||||
led-2 {
|
||||
label = "power_led";
|
||||
function = LED_FUNCTION_POWER;
|
||||
gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
|
||||
panel {
|
||||
compatible = "kyo,tcg121xglp";
|
||||
backlight = <&backlight>;
|
||||
power-supply = <®_3v3>;
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&lvds0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
clk50m_phy: phy-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <50000000>;
|
||||
};
|
||||
|
||||
reg_1v8: regulator-1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
reg_3v3: regulator-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
reg_h1_vbus: regulator-h1-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "h1-vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_otg_vbus: regulator-otg-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "otg-vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
rotary-encoder {
|
||||
compatible = "rotary-encoder";
|
||||
pinctrl-0 = <&pinctrl_rotary_ch>;
|
||||
gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>,
|
||||
<&gpio2 4 GPIO_ACTIVE_HIGH>;
|
||||
linux,axis = <REL_WHEEL>;
|
||||
rotary-encoder,steps-per-period = <4>;
|
||||
rotary-encoder,relative-axis;
|
||||
rotary-encoder,rollover;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "prti6q-sgtl5000";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,widgets =
|
||||
"Microphone", "Microphone Jack",
|
||||
"Line", "Line In Jack",
|
||||
"Headphone", "Headphone Jack",
|
||||
"Speaker", "External Speaker";
|
||||
simple-audio-card,routing =
|
||||
"MIC_IN", "Microphone Jack",
|
||||
"LINE_IN", "Line In Jack",
|
||||
"Headphone Jack", "HP_OUT",
|
||||
"External Speaker", "LINE_OUT";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&ssi1>;
|
||||
system-clock-frequency = <0>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&codec>;
|
||||
bitclock-master;
|
||||
frame-master;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&audmux {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_audmux>;
|
||||
status = "okay";
|
||||
|
||||
mux-ssi1 {
|
||||
fsl,audmux-port = <0>;
|
||||
fsl,port-config = <
|
||||
IMX_AUDMUX_V2_PTCR_SYN 0
|
||||
IMX_AUDMUX_V2_PTCR_TFSEL(2) 0
|
||||
IMX_AUDMUX_V2_PTCR_TCSEL(2) 0
|
||||
IMX_AUDMUX_V2_PTCR_TFSDIR 0
|
||||
IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
|
||||
>;
|
||||
};
|
||||
|
||||
mux-pins3 {
|
||||
fsl,audmux-port = <2>;
|
||||
fsl,port-config = <
|
||||
IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
|
||||
0 IMX_AUDMUX_V2_PDCR_TXRXEN
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&can1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_can1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_can2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&clks {
|
||||
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
|
||||
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
|
||||
};
|
||||
|
||||
&ecspi1 {
|
||||
cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ecspi1>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <20000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&ecspi2 {
|
||||
cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ecspi2>;
|
||||
status = "okay";
|
||||
|
||||
touchscreen@0 {
|
||||
compatible = "ti,tsc2046";
|
||||
reg = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_touchscreen>;
|
||||
spi-max-frequency = <200000>;
|
||||
interrupts-extended = <&gpio5 8 IRQ_TYPE_EDGE_FALLING>;
|
||||
pendown-gpio = <&gpio5 8 GPIO_ACTIVE_LOW>;
|
||||
touchscreen-size-x = <800>;
|
||||
touchscreen-size-y = <480>;
|
||||
touchscreen-inverted-y;
|
||||
touchscreen-max-pressure = <4095>;
|
||||
ti,vref-delay-usecs = /bits/ 16 <100>;
|
||||
ti,x-plate-ohms = /bits/ 16 <800>;
|
||||
ti,y-plate-ohms = /bits/ 16 <300>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&fec {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_enet>;
|
||||
phy-mode = "rmii";
|
||||
clocks = <&clks IMX6QDL_CLK_ENET>,
|
||||
<&clks IMX6QDL_CLK_ENET>,
|
||||
<&clk50m_phy>;
|
||||
clock-names = "ipg", "ahb", "ptp";
|
||||
phy-handle = <&rmii_phy>;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/* Microchip KSZ8081RNA PHY */
|
||||
rmii_phy: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
|
||||
reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <300>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
gpio-line-names =
|
||||
"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
|
||||
"CAM2_MIRROR", "", "", "SMBALERT",
|
||||
"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
|
||||
"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
|
||||
"SD1_DATA3", "", "",
|
||||
"", "", "", "", "", "", "", "";
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
gpio-line-names =
|
||||
"", "", "", "", "", "", "", "",
|
||||
"REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
|
||||
"BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
|
||||
"", "", "", "", "", "", "ISB_IN1", "ON_SWITCH",
|
||||
"POWER_LED", "", "", "", "", "", "", "";
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
gpio-line-names =
|
||||
"", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "", "", "", "",
|
||||
"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
|
||||
"CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ",
|
||||
"TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
|
||||
"YACO_RESET";
|
||||
};
|
||||
|
||||
&gpio4 {
|
||||
gpio-line-names =
|
||||
"", "", "", "", "", "", "", "",
|
||||
"", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX",
|
||||
"", "", "DIP1_FB", "", "VCAM_EN", "", "", "",
|
||||
"CPU_LIGHT_ON", "", "ETH_RESET", "CPU_CONTACT_IN", "BL_EN",
|
||||
"BL_PWM", "ETH_INTRP", "ISB_LED";
|
||||
};
|
||||
|
||||
&gpio5 {
|
||||
gpio-line-names =
|
||||
"", "", "", "", "", "", "", "",
|
||||
"TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO",
|
||||
"ECSPI2_SS0", "ECSPI2_SCLK", "", "",
|
||||
"", "", "", "", "", "", "", "",
|
||||
"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
|
||||
"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c1>;
|
||||
status = "okay";
|
||||
|
||||
codec: audio-codec@a {
|
||||
compatible = "fsl,sgtl5000";
|
||||
reg = <0xa>;
|
||||
#sound-dai-cells = <0>;
|
||||
clocks = <&clks 201>;
|
||||
VDDA-supply = <®_3v3>;
|
||||
VDDIO-supply = <®_3v3>;
|
||||
VDDD-supply = <®_1v8>;
|
||||
};
|
||||
|
||||
video-decoder@5c {
|
||||
compatible = "ti,tvp5150";
|
||||
reg = <0x5c>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
tvp5150_comp0_in: endpoint {
|
||||
remote-endpoint = <&comp0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Output port 2 is video output pad */
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
|
||||
tvp5151_to_ipu1_csi0_mux: endpoint {
|
||||
remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
keypad@70 {
|
||||
compatible = "holtek,ht16k33";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_keypad>;
|
||||
reg = <0x70>;
|
||||
refresh-rate-hz = <20>;
|
||||
debounce-delay-ms = <50>;
|
||||
interrupts-extended = <&gpio4 5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
|
||||
keypad,num-rows = <12>;
|
||||
keypad,num-columns = <3>;
|
||||
linux,keymap = <
|
||||
MATRIX_KEY(2, 0, KEY_F6)
|
||||
MATRIX_KEY(3, 0, KEY_F8)
|
||||
MATRIX_KEY(4, 0, KEY_F10)
|
||||
MATRIX_KEY(5, 0, KEY_F4)
|
||||
MATRIX_KEY(6, 0, KEY_F2)
|
||||
MATRIX_KEY(2, 1, KEY_F5)
|
||||
MATRIX_KEY(3, 1, KEY_F7)
|
||||
MATRIX_KEY(4, 1, KEY_F9)
|
||||
MATRIX_KEY(5, 1, KEY_F3)
|
||||
MATRIX_KEY(6, 1, KEY_F1)
|
||||
>;
|
||||
};
|
||||
|
||||
/* additional i2c devices are added automatically by the boot loader */
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3>;
|
||||
status = "okay";
|
||||
|
||||
adc@49 {
|
||||
compatible = "ti,ads1015";
|
||||
reg = <0x49>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
channel@4 {
|
||||
reg = <4>;
|
||||
ti,gain = <3>;
|
||||
ti,datarate = <3>;
|
||||
};
|
||||
|
||||
channel@5 {
|
||||
reg = <5>;
|
||||
ti,gain = <3>;
|
||||
ti,datarate = <3>;
|
||||
};
|
||||
|
||||
channel@6 {
|
||||
reg = <6>;
|
||||
ti,gain = <3>;
|
||||
ti,datarate = <3>;
|
||||
};
|
||||
|
||||
channel@7 {
|
||||
reg = <7>;
|
||||
ti,gain = <3>;
|
||||
ti,datarate = <3>;
|
||||
};
|
||||
};
|
||||
|
||||
rtc@51 {
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
};
|
||||
|
||||
temperature-sensor@70 {
|
||||
compatible = "ti,tmp103";
|
||||
reg = <0x70>;
|
||||
};
|
||||
};
|
||||
|
||||
&ipu1_csi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_ipu1_csi0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ipu1_csi0_mux_from_parallel_sensor {
|
||||
remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
|
||||
};
|
||||
|
||||
&ldb {
|
||||
status = "okay";
|
||||
|
||||
lvds-channel@0 {
|
||||
status = "okay";
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
|
||||
lvds0_out: endpoint {
|
||||
remote-endpoint = <&panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
#sound-dai-cells = <0>;
|
||||
fsl,mode = "ac97-slave";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart5>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh1 {
|
||||
vbus-supply = <®_h1_vbus>;
|
||||
pinctrl-names = "default";
|
||||
phy_type = "utmi";
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg {
|
||||
vbus-supply = <®_otg_vbus>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usbotg>;
|
||||
phy_type = "utmi";
|
||||
dr_mode = "host";
|
||||
disable-over-current;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc1>;
|
||||
cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
|
||||
no-1-8-v;
|
||||
disable-wp;
|
||||
cap-sd-highspeed;
|
||||
no-mmc;
|
||||
no-sdio;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usdhc3>;
|
||||
bus-width = <8>;
|
||||
no-1-8-v;
|
||||
non-removable;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_hog>;
|
||||
|
||||
pinctrl_audmux: audmuxgrp {
|
||||
fsl,pins = <
|
||||
/* SGTL5000 sys_mclk */
|
||||
MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0
|
||||
MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
|
||||
MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
|
||||
MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
|
||||
MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_backlight: backlightgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_can1: can1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b000
|
||||
MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x3008
|
||||
/* CAN1_SR */
|
||||
MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13008
|
||||
/* CAN1_TERM */
|
||||
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b088
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_can2: can2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b000
|
||||
MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x3008
|
||||
/* CAN2_SR */
|
||||
MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13008
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi1: ecspi1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
|
||||
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
|
||||
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
|
||||
/* CS */
|
||||
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ecspi2: ecspi2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1
|
||||
MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1
|
||||
MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1
|
||||
MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_enet: enetgrp {
|
||||
fsl,pins = <
|
||||
/* MX6QDL_ENET_PINGRP4 */
|
||||
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
||||
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
||||
MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
|
||||
MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
|
||||
MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
|
||||
MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
|
||||
MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
|
||||
MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
|
||||
MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
|
||||
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
|
||||
/* Phy reset */
|
||||
MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
|
||||
/* nINTRP */
|
||||
MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_gpiokeys: gpiokeygrp {
|
||||
fsl,pins = <
|
||||
/* ROTARY_BTN */
|
||||
MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0
|
||||
/* nON_SWITCH */
|
||||
MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_hog: hoggrp {
|
||||
fsl,pins = <
|
||||
/* ITU656_nRESET */
|
||||
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
|
||||
/* CAM1_MIRROR */
|
||||
MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0
|
||||
/* CAM2_MIRROR */
|
||||
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0
|
||||
/* CAM_nDETECT */
|
||||
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
|
||||
/* ISB_IN1 */
|
||||
MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0
|
||||
/* ISB_nIN2 */
|
||||
MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0
|
||||
/* WARN_LIGHT */
|
||||
MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0
|
||||
/* ON2_FB */
|
||||
MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0
|
||||
/* YACO_nIRQ */
|
||||
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0
|
||||
/* YACO_BOOT0 */
|
||||
MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0
|
||||
/* YACO_nRESET */
|
||||
MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
|
||||
/* FORCE_ON1 */
|
||||
MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
|
||||
/* AUDIO_nRESET */
|
||||
MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0
|
||||
/* ITU656_nPDN */
|
||||
MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0
|
||||
|
||||
/* HW revision detect */
|
||||
/* REV_ID0 */
|
||||
MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
|
||||
/* REV_ID1 is shared with PWM3 */
|
||||
/* REV_ID2 */
|
||||
MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
|
||||
/* REV_ID3 */
|
||||
MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
|
||||
/* REV_ID4 */
|
||||
MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
|
||||
|
||||
/* New in HW revision 1 */
|
||||
/* ON1_FB */
|
||||
MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0
|
||||
/* DIP1_FB */
|
||||
MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c1: i2c1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1
|
||||
MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c3: i2c3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
|
||||
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_ipu1_csi0: ipu1csi0grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
|
||||
MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
|
||||
MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
|
||||
MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
|
||||
MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
|
||||
MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
|
||||
MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
|
||||
MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
|
||||
MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_keypad: keypadgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_leds: ledsgrp {
|
||||
fsl,pins = <
|
||||
/* DEBUG0 */
|
||||
MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0
|
||||
/* DEBUG1 */
|
||||
MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0
|
||||
/* POWER_LED */
|
||||
MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm1: pwm1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_pwm3: pwm3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_rotary_ch: rotarychgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
|
||||
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_touchscreen: touchscreengrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b0
|
||||
MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
/* YaCO AUX Uart */
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart2: uart2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
/* YaCO Touchscreen UART */
|
||||
pinctrl_uart3: uart3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart4: uart4grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart5: uart5grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
|
||||
MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usbotg: usbotggrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
|
||||
/* power enable, high active */
|
||||
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1: usdhc1grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
|
||||
MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
|
||||
MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
|
||||
MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
|
||||
MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
|
||||
MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
|
||||
MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc3: usdhc3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
|
||||
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099
|
||||
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099
|
||||
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099
|
||||
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099
|
||||
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099
|
||||
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099
|
||||
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099
|
||||
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099
|
||||
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
|
||||
MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
|
||||
>;
|
||||
};
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче