microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev 

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (79 commits)
  ata-acpi: don't call _GTF for disabled drive
  sata_mv add temporary 3 second init delay for SiliconImage PMs
  sata_mv remove redundant edma init code
  sata_mv add basic port multiplier support
  sata_mv fix SOC flags, enable NCQ on SOC
  sata_mv disable hotplug for now
  sata_mv cosmetics
  sata_mv hardreset rework
  [libata] improve Kconfig help text for new PMP, SFF options
  libata: make EH fail gracefully if no reset method is available
  libata: Be a bit more slack about early devices
  libata: cable logic
  libata: move link onlineness check out of softreset methods
  libata: kill dead code paths in reset path
  pata_scc: fix build breakage
  libata: make PMP support optional
  libata: implement PMP helpers
  libata: separate PMP support code from core code
  libata: make SFF support optional
  libata: don't use ap->ioaddr in non-SFF drivers
  ...
This commit is contained in:
Linus Torvalds 2008-04-18 08:38:06 -07:00
Родитель 73e3e6481f 48feb3c419
Коммит 8019aa946a
83 изменённых файлов: 4871 добавлений и 8885 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

64
drivers/ata/Kconfig
Просмотреть файл

@ -28,7 +28,7 @@ config ATA_NONSTANDARD
default n
config ATA_ACPI
bool
bool "ATA ACPI Support"
depends on ACPI && PCI
select ACPI_DOCK
default y
@ -41,6 +41,13 @@ config ATA_ACPI
You can disable this at kernel boot time by using the
option libata.noacpi=1
config SATA_PMP
bool "SATA Port Multiplier support"
default y
help
This option adds support for SATA Port Multipliers
(the SATA version of an ethernet hub, or SAS expander).
config SATA_AHCI
tristate "AHCI SATA support"
depends on PCI
@ -49,6 +56,43 @@ config SATA_AHCI
If unsure, say N.
config SATA_SIL24
tristate "Silicon Image 3124/3132 SATA support"
depends on PCI
help
This option enables support for Silicon Image 3124/3132 Serial ATA.
If unsure, say N.
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
help
This option enables support for Freescale 3.0Gbps SATA controller.
It can be found on MPC837x and MPC8315.
If unsure, say N.
config ATA_SFF
bool "ATA SFF support"
default y
help
This option adds support for ATA controllers with SFF
compliant or similar programming interface.
SFF is the legacy IDE interface that has been around since
the dawn of time. Almost all PATA controllers have an
SFF interface. Many SATA controllers have an SFF interface
when configured into a legacy compatibility mode.
For users with exclusively modern controllers like AHCI,
Silicon Image 3124, or Marvell 6440, you may choose to
disable this uneeded SFF support.
If unsure, say Y.
if ATA_SFF
config SATA_SVW
tristate "ServerWorks Frodo / Apple K2 SATA support"
depends on PCI
@ -125,14 +169,6 @@ config SATA_SIL
If unsure, say N.
config SATA_SIL24
tristate "Silicon Image 3124/3132 SATA support"
depends on PCI
help
This option enables support for Silicon Image 3124/3132 Serial ATA.
If unsure, say N.
config SATA_SIS
tristate "SiS 964/965/966/180 SATA support"
depends on PCI
@ -183,15 +219,6 @@ config PATA_ACPI
firmware in the BIOS. This driver can sometimes handle
otherwise unsupported hardware.
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
help
This option enables support for Freescale 3.0Gbps SATA controller.
It can be found on MPC837x and MPC8315.
If unsure, say N.
config PATA_ALI
tristate "ALi PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
@ -679,4 +706,5 @@ config PATA_BF54X
If unsure, say N.
endif # ATA_SFF
endif # ATA

5
drivers/ata/Makefile
Просмотреть файл

@ -78,6 +78,7 @@ obj-$(CONFIG_ATA_GENERIC) += ata_generic.o
# Should be last libata driver
obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o
libata-objs := libata-core.o libata-scsi.o libata-sff.o libata-eh.o \
libata-pmp.o
libata-objs := libata-core.o libata-scsi.o libata-eh.o
libata-$(CONFIG_ATA_SFF) += libata-sff.o
libata-$(CONFIG_SATA_PMP) += libata-pmp.o
libata-$(CONFIG_ATA_ACPI) += libata-acpi.o

305
drivers/ata/ahci.c
Просмотреть файл

@ -62,7 +62,6 @@ enum {
AHCI_MAX_PORTS = 32,
AHCI_MAX_SG = 168, /* hardware max is 64K */
AHCI_DMA_BOUNDARY = 0xffffffff,
AHCI_USE_CLUSTERING = 1,
AHCI_MAX_CMDS = 32,
AHCI_CMD_SZ = 32,
AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
@ -198,7 +197,6 @@ enum {
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
ATA_FLAG_IPM,
AHCI_LFLAG_COMMON = ATA_LFLAG_SKIP_D2H_BSY,
ICH_MAP = 0x90, /* ICH MAP register */
};
@ -245,19 +243,24 @@ static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
static void ahci_irq_clear(struct ata_port *ap);
static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
static int ahci_port_start(struct ata_port *ap);
static void ahci_port_stop(struct ata_port *ap);
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
static void ahci_qc_prep(struct ata_queued_cmd *qc);
static u8 ahci_check_status(struct ata_port *ap);
static void ahci_freeze(struct ata_port *ap);
static void ahci_thaw(struct ata_port *ap);
static void ahci_pmp_attach(struct ata_port *ap);
static void ahci_pmp_detach(struct ata_port *ap);
static int ahci_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static void ahci_postreset(struct ata_link *link, unsigned int *class);
static void ahci_error_handler(struct ata_port *ap);
static void ahci_vt8251_error_handler(struct ata_port *ap);
static void ahci_p5wdh_error_handler(struct ata_port *ap);
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
static int ahci_port_resume(struct ata_port *ap);
static void ahci_dev_config(struct ata_device *dev);
@ -276,129 +279,54 @@ static struct class_device_attribute *ahci_shost_attrs[] = {
};
static struct scsi_host_template ahci_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.change_queue_depth = ata_scsi_change_queue_depth,
ATA_NCQ_SHT(DRV_NAME),
.can_queue = AHCI_MAX_CMDS - 1,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = AHCI_MAX_SG,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = AHCI_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = AHCI_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
.shost_attrs = ahci_shost_attrs,
};
static const struct ata_port_operations ahci_ops = {
.check_status = ahci_check_status,
.check_altstatus = ahci_check_status,
.dev_select = ata_noop_dev_select,
.dev_config = ahci_dev_config,
.tf_read = ahci_tf_read,
static struct ata_port_operations ahci_ops = {
.inherits = &sata_pmp_port_ops,
.qc_defer = sata_pmp_qc_defer_cmd_switch,
.qc_prep = ahci_qc_prep,
.qc_issue = ahci_qc_issue,
.irq_clear = ahci_irq_clear,
.scr_read = ahci_scr_read,
.scr_write = ahci_scr_write,
.qc_fill_rtf = ahci_qc_fill_rtf,
.freeze = ahci_freeze,
.thaw = ahci_thaw,
.softreset = ahci_softreset,
.hardreset = ahci_hardreset,
.postreset = ahci_postreset,
.pmp_softreset = ahci_softreset,
.error_handler = ahci_error_handler,
.post_internal_cmd = ahci_post_internal_cmd,
.dev_config = ahci_dev_config,
.scr_read = ahci_scr_read,
.scr_write = ahci_scr_write,
.pmp_attach = ahci_pmp_attach,
.pmp_detach = ahci_pmp_detach,
#ifdef CONFIG_PM
.port_suspend = ahci_port_suspend,
.port_resume = ahci_port_resume,
#endif
.enable_pm = ahci_enable_alpm,
.disable_pm = ahci_disable_alpm,
.port_start = ahci_port_start,
.port_stop = ahci_port_stop,
};
static const struct ata_port_operations ahci_vt8251_ops = {
.check_status = ahci_check_status,
.check_altstatus = ahci_check_status,
.dev_select = ata_noop_dev_select,
.tf_read = ahci_tf_read,
.qc_defer = sata_pmp_qc_defer_cmd_switch,
.qc_prep = ahci_qc_prep,
.qc_issue = ahci_qc_issue,
.irq_clear = ahci_irq_clear,
.scr_read = ahci_scr_read,
.scr_write = ahci_scr_write,
.freeze = ahci_freeze,
.thaw = ahci_thaw,
.error_handler = ahci_vt8251_error_handler,
.post_internal_cmd = ahci_post_internal_cmd,
.pmp_attach = ahci_pmp_attach,
.pmp_detach = ahci_pmp_detach,
#ifdef CONFIG_PM
.port_suspend = ahci_port_suspend,
.port_resume = ahci_port_resume,
#endif
.port_start = ahci_port_start,
.port_stop = ahci_port_stop,
};
static const struct ata_port_operations ahci_p5wdh_ops = {
.check_status = ahci_check_status,
.check_altstatus = ahci_check_status,
.dev_select = ata_noop_dev_select,
static struct ata_port_operations ahci_vt8251_ops = {
.inherits = &ahci_ops,
.hardreset = ahci_vt8251_hardreset,
};
.tf_read = ahci_tf_read,
.qc_defer = sata_pmp_qc_defer_cmd_switch,
.qc_prep = ahci_qc_prep,
.qc_issue = ahci_qc_issue,
.irq_clear = ahci_irq_clear,
.scr_read = ahci_scr_read,
.scr_write = ahci_scr_write,
.freeze = ahci_freeze,
.thaw = ahci_thaw,
.error_handler = ahci_p5wdh_error_handler,
.post_internal_cmd = ahci_post_internal_cmd,
.pmp_attach = ahci_pmp_attach,
.pmp_detach = ahci_pmp_detach,
#ifdef CONFIG_PM
.port_suspend = ahci_port_suspend,
.port_resume = ahci_port_resume,
#endif
.port_start = ahci_port_start,
.port_stop = ahci_port_stop,
static struct ata_port_operations ahci_p5wdh_ops = {
.inherits = &ahci_ops,
.hardreset = ahci_p5wdh_hardreset,
};
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
@ -407,7 +335,6 @@ static const struct ata_port_info ahci_port_info[] = {
/* board_ahci */
{
.flags = AHCI_FLAG_COMMON,
.link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
@ -416,7 +343,6 @@ static const struct ata_port_info ahci_port_info[] = {
{
AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
.link_flags = AHCI_LFLAG_COMMON | ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_vt8251_ops,
@ -425,7 +351,6 @@ static const struct ata_port_info ahci_port_info[] = {
{
AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
.flags = AHCI_FLAG_COMMON,
.link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
@ -436,7 +361,6 @@ static const struct ata_port_info ahci_port_info[] = {
AHCI_HFLAG_32BIT_ONLY |
AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
.link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
@ -447,7 +371,6 @@ static const struct ata_port_info ahci_port_info[] = {
AHCI_HFLAG_MV_PATA),
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
.link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
@ -457,7 +380,6 @@ static const struct ata_port_info ahci_port_info[] = {
AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
.link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
@ -1255,13 +1177,14 @@ static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
static int ahci_kick_engine(struct ata_port *ap, int force_restart)
{
void __iomem *port_mmio = ap->ioaddr.cmd_addr;
void __iomem *port_mmio = ahci_port_base(ap);
struct ahci_host_priv *hpriv = ap->host->private_data;
u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
u32 tmp;
int busy, rc;
/* do we need to kick the port? */
busy = ahci_check_status(ap) & (ATA_BUSY | ATA_DRQ);
busy = status & (ATA_BUSY | ATA_DRQ);
if (!busy && !force_restart)
return 0;
@ -1328,10 +1251,21 @@ static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
return 0;
}
static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
int pmp, unsigned long deadline)
static int ahci_check_ready(struct ata_link *link)
{
void __iomem *port_mmio = ahci_port_base(link->ap);
u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
if (!(status & ATA_BUSY))
return 1;
return 0;
}
static int ahci_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
int pmp = sata_srst_pmp(link);
const char *reason = NULL;
unsigned long now, msecs;
struct ata_taskfile tf;
@ -1339,12 +1273,6 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
DPRINTK("ENTER\n");
if (ata_link_offline(link)) {
DPRINTK("PHY reports no device\n");
*class = ATA_DEV_NONE;
return 0;
}
/* prepare for SRST (AHCI-1.1 10.4.1) */
rc = ahci_kick_engine(ap, 1);
if (rc && rc != -EOPNOTSUPP)
@ -1374,10 +1302,8 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
tf.ctl &= ~ATA_SRST;
ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
/* wait a while before checking status */
ata_wait_after_reset(ap, deadline);
rc = ata_wait_ready(ap, deadline);
/* wait for link to become ready */
rc = ata_wait_after_reset(link, deadline, ahci_check_ready);
/* link occupied, -ENODEV too is an error */
if (rc) {
reason = "device not ready";
@ -1393,24 +1319,15 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
return rc;
}
static int ahci_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
int pmp = 0;
if (link->ap->flags & ATA_FLAG_PMP)
pmp = SATA_PMP_CTRL_PORT;
return ahci_do_softreset(link, class, pmp, deadline);
}
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
int rc;
DPRINTK("ENTER\n");
@ -1422,14 +1339,13 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
tf.command = 0x80;
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
rc = sata_std_hardreset(link, class, deadline);
rc = sata_link_hardreset(link, timing, deadline, &online,
ahci_check_ready);
ahci_start_engine(ap);
if (rc == 0 && ata_link_online(link))
if (online)
*class = ahci_dev_classify(ap);
if (rc != -EAGAIN && *class == ATA_DEV_UNKNOWN)
*class = ATA_DEV_NONE;
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
return rc;
@ -1439,7 +1355,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
u32 serror;
bool online;
int rc;
DPRINTK("ENTER\n");
@ -1447,11 +1363,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
ahci_stop_engine(ap);
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
deadline);
/* vt8251 needs SError cleared for the port to operate */
ahci_scr_read(ap, SCR_ERROR, &serror);
ahci_scr_write(ap, SCR_ERROR, serror);
deadline, &online, NULL);
ahci_start_engine(ap);
@ -1460,7 +1372,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
/* vt8251 doesn't clear BSY on signature FIS reception,
* request follow-up softreset.
*/
return rc ?: -EAGAIN;
return online ? -EAGAIN : rc;
}
static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
@ -1470,6 +1382,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
int rc;
ahci_stop_engine(ap);
@ -1480,16 +1393,10 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
deadline);
deadline, &online, NULL);
ahci_start_engine(ap);
if (rc || ata_link_offline(link))
return rc;
/* spec mandates ">= 2ms" before checking status */
msleep(150);
/* The pseudo configuration device on SIMG4726 attached to
* ASUS P5W-DH Deluxe doesn't send signature FIS after
* hardreset if no device is attached to the first downstream
@ -1503,11 +1410,13 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
* have to be reset again. For most cases, this should
* suffice while making probing snappish enough.
*/
rc = ata_wait_ready(ap, jiffies + 2 * HZ);
if (online) {
rc = ata_wait_after_reset(link, jiffies + 2 * HZ,
ahci_check_ready);
if (rc)
ahci_kick_engine(ap, 0);
return 0;
}
return rc;
}
static void ahci_postreset(struct ata_link *link, unsigned int *class)
@ -1530,27 +1439,6 @@ static void ahci_postreset(struct ata_link *link, unsigned int *class)
}
}
static int ahci_pmp_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
return ahci_do_softreset(link, class, link->pmp, deadline);
}
static u8 ahci_check_status(struct ata_port *ap)
{
void __iomem *mmio = ap->ioaddr.cmd_addr;
return readl(mmio + PORT_TFDATA) & 0xFF;
}
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
ata_tf_from_fis(d2h_fis, tf);
}
static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
{
struct scatterlist *sg;
@ -1663,27 +1551,27 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
active_ehi->err_mask |= AC_ERR_HSM;
active_ehi->action |= ATA_EH_SOFTRESET;
active_ehi->action |= ATA_EH_RESET;
ata_ehi_push_desc(active_ehi,
"unknown FIS %08x %08x %08x %08x" ,
unk[0], unk[1], unk[2], unk[3]);
}
if (ap->nr_pmp_links && (irq_stat & PORT_IRQ_BAD_PMP)) {
if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
active_ehi->err_mask |= AC_ERR_HSM;
active_ehi->action |= ATA_EH_SOFTRESET;
active_ehi->action |= ATA_EH_RESET;
ata_ehi_push_desc(active_ehi, "incorrect PMP");
}
if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
host_ehi->err_mask |= AC_ERR_HOST_BUS;
host_ehi->action |= ATA_EH_SOFTRESET;
host_ehi->action |= ATA_EH_RESET;
ata_ehi_push_desc(host_ehi, "host bus error");
}
if (irq_stat & PORT_IRQ_IF_ERR) {
host_ehi->err_mask |= AC_ERR_ATA_BUS;
host_ehi->action |= ATA_EH_SOFTRESET;
host_ehi->action |= ATA_EH_RESET;
ata_ehi_push_desc(host_ehi, "interface fatal error");
}
@ -1704,7 +1592,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
static void ahci_port_intr(struct ata_port *ap)
{
void __iomem *port_mmio = ap->ioaddr.cmd_addr;
void __iomem *port_mmio = ahci_port_base(ap);
struct ata_eh_info *ehi = &ap->link.eh_info;
struct ahci_port_priv *pp = ap->private_data;
struct ahci_host_priv *hpriv = ap->host->private_data;
@ -1766,21 +1654,16 @@ static void ahci_port_intr(struct ata_port *ap)
else
qc_active = readl(port_mmio + PORT_CMD_ISSUE);
rc = ata_qc_complete_multiple(ap, qc_active, NULL);
rc = ata_qc_complete_multiple(ap, qc_active);
/* while resetting, invalid completions are expected */
if (unlikely(rc < 0 && !resetting)) {
ehi->err_mask |= AC_ERR_HSM;
ehi->action |= ATA_EH_SOFTRESET;
ehi->action |= ATA_EH_RESET;
ata_port_freeze(ap);
}
}
static void ahci_irq_clear(struct ata_port *ap)
{
/* TODO */
}
static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
@ -1854,6 +1737,15 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
return 0;
}
static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
{
struct ahci_port_priv *pp = qc->ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
ata_tf_from_fis(d2h_fis, &qc->result_tf);
return true;
}
static void ahci_freeze(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
@ -1886,37 +1778,7 @@ static void ahci_error_handler(struct ata_port *ap)
ahci_start_engine(ap);
}
/* perform recovery */
sata_pmp_do_eh(ap, ata_std_prereset, ahci_softreset,
ahci_hardreset, ahci_postreset,
sata_pmp_std_prereset, ahci_pmp_softreset,
sata_pmp_std_hardreset, sata_pmp_std_postreset);
}
static void ahci_vt8251_error_handler(struct ata_port *ap)
{
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
/* restart engine */
ahci_stop_engine(ap);
ahci_start_engine(ap);
}
/* perform recovery */
ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_vt8251_hardreset,
ahci_postreset);
}
static void ahci_p5wdh_error_handler(struct ata_port *ap)
{
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
/* restart engine */
ahci_stop_engine(ap);
ahci_start_engine(ap);
}
/* perform recovery */
ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_p5wdh_hardreset,
ahci_postreset);
sata_pmp_error_handler(ap);
}
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
@ -1961,7 +1823,7 @@ static int ahci_port_resume(struct ata_port *ap)
ahci_power_up(ap);
ahci_start_port(ap);
if (ap->nr_pmp_links)
if (sata_pmp_attached(ap))
ahci_pmp_attach(ap);
else
ahci_pmp_detach(ap);
@ -2324,7 +2186,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
void __iomem *port_mmio = ahci_port_base(ap);
ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
ata_port_pbar_desc(ap, AHCI_PCI_BAR,
@ -2333,12 +2194,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* set initial link pm policy */
ap->pm_policy = NOT_AVAILABLE;
/* standard SATA port setup */
if (hpriv->port_map & (1 << i))
ap->ioaddr.cmd_addr = port_mmio;
/* disabled/not-implemented port */
else
if (!(hpriv->port_map & (1 << i)))
ap->ops = &ata_dummy_port_ops;
}

51
drivers/ata/ata_generic.c
Просмотреть файл

@ -95,53 +95,13 @@ static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
}
static struct scsi_host_template generic_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations generic_port_ops = {
.set_mode = generic_set_mode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &ata_bmdma_port_ops,
.cable_detect = ata_cable_unknown,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.set_mode = generic_set_mode,
};
static int all_generic_ide; /* Set to claim all devices */
@ -160,7 +120,6 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
{
u16 command;
static const struct ata_port_info info = {
.sht = &generic_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -191,9 +150,9 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
return -ENODEV;
if (dev->vendor == PCI_VENDOR_ID_AL)
ata_pci_clear_simplex(dev);
ata_pci_bmdma_clear_simplex(dev);
return ata_pci_init_one(dev, ppi);
return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL);
}
static struct pci_device_id ata_generic[] = {

314
drivers/ata/ata_piix.c
Просмотреть файл

@ -100,13 +100,11 @@ enum {
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
ICH5_PMR = 0x90, /* port mapping register */
ICH5_PCS = 0x92, /* port control and status */
PIIX_SCC = 0x0A, /* sub-class code register */
PIIX_SIDPR_BAR = 5,
PIIX_SIDPR_LEN = 16,
PIIX_SIDPR_IDX = 0,
PIIX_SIDPR_DATA = 4,
PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */
PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */
PIIX_FLAG_SIDPR = (1 << 29), /* SATA idx/data pair regs */
@ -140,12 +138,11 @@ enum piix_controller_ids {
ich_pata_100, /* ICH up to UDMA 100 */
ich5_sata,
ich6_sata,
ich6_sata_ahci,
ich6m_sata_ahci,
ich8_sata_ahci,
ich6m_sata,
ich8_sata,
ich8_2port_sata,
ich8m_apple_sata_ahci, /* locks up on second port enable */
tolapai_sata_ahci,
ich8m_apple_sata, /* locks up on second port enable */
tolapai_sata,
piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */
};
@ -162,7 +159,7 @@ struct piix_host_priv {
static int piix_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent);
static void piix_pata_error_handler(struct ata_port *ap);
static int piix_pata_prereset(struct ata_link *link, unsigned long deadline);
static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static void ich_set_dmamode(struct ata_port *ap, struct ata_device *adev);
@ -170,7 +167,6 @@ static int ich_pata_cable_detect(struct ata_port *ap);
static u8 piix_vmw_bmdma_status(struct ata_port *ap);
static int piix_sidpr_scr_read(struct ata_port *ap, unsigned int reg, u32 *val);
static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val);
static void piix_sidpr_error_handler(struct ata_port *ap);
#ifdef CONFIG_PM
static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int piix_pci_device_resume(struct pci_dev *pdev);
@ -236,25 +232,27 @@ static const struct pci_device_id piix_pci_tbl[] = {
/* 82801FB/FW (ICH6/ICH6W) */
{ 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
/* 82801FR/FRW (ICH6R/ICH6RW) */
{ 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
/* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented) */
{ 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
{ 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
/* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented).
* Attach iff the controller is in IDE mode. */
{ 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_IDE << 8, 0xffff00, ich6m_sata },
/* 82801GB/GR/GH (ICH7, identical to ICH6) */
{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
/* 2801GBM/GHM (ICH7M, identical to ICH6M) */
{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
{ 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata },
/* Enterprise Southbridge 2 (631xESB/632xESB) */
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
/* SATA Controller 1 IDE (ICH8) */
{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller 2 IDE (ICH8) */
{ 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* Mobile SATA Controller IDE (ICH8M) */
{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* Mobile SATA Controller IDE (ICH8M), Apple */
{ 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata_ahci },
{ 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata },
/* SATA Controller IDE (ICH9) */
{ 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
{ 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH9) */
{ 0x8086, 0x2921, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9) */
@ -264,15 +262,15 @@ static const struct pci_device_id piix_pci_tbl[] = {
/* SATA Controller IDE (ICH9M) */
{ 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH9M) */
{ 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
{ 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (Tolapai) */
{ 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata_ahci },
{ 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata },
/* SATA Controller IDE (ICH10) */
{ 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
{ 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH10) */
{ 0x8086, 0x3a06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (ICH10) */
{ 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci },
{ 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH10) */
{ 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
@ -291,170 +289,37 @@ static struct pci_driver piix_pci_driver = {
};
static struct scsi_host_template piix_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations piix_pata_ops = {
.set_piomode = piix_set_piomode,
.set_dmamode = piix_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = piix_pata_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
static struct ata_port_operations piix_pata_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = ata_cable_40wire,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
};
static const struct ata_port_operations ich_pata_ops = {
.set_piomode = piix_set_piomode,
.set_dmamode = ich_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = piix_pata_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ich_pata_cable_detect,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
};
static const struct ata_port_operations piix_sata_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
};
static const struct ata_port_operations piix_vmw_ops = {
.set_piomode = piix_set_piomode,
.set_dmamode = piix_set_dmamode,
.mode_filter = ata_pci_default_filter,
.prereset = piix_pata_prereset,
};
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
static struct ata_port_operations piix_vmw_ops = {
.inherits = &piix_pata_ops,
.bmdma_status = piix_vmw_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = piix_pata_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
};
static const struct ata_port_operations piix_sidpr_sata_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
static struct ata_port_operations ich_pata_ops = {
.inherits = &piix_pata_ops,
.cable_detect = ich_pata_cable_detect,
.set_dmamode = ich_set_dmamode,
};
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
static struct ata_port_operations piix_sata_ops = {
.inherits = &ata_bmdma_port_ops,
};
static struct ata_port_operations piix_sidpr_sata_ops = {
.inherits = &piix_sata_ops,
.hardreset = sata_std_hardreset,
.scr_read = piix_sidpr_scr_read,
.scr_write = piix_sidpr_scr_write,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = piix_sidpr_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
};
static const struct piix_map_db ich5_map_db = {
@ -553,12 +418,11 @@ static const struct piix_map_db tolapai_map_db = {
static const struct piix_map_db *piix_map_db_table[] = {
[ich5_sata] = &ich5_map_db,
[ich6_sata] = &ich6_map_db,
[ich6_sata_ahci] = &ich6_map_db,
[ich6m_sata_ahci] = &ich6m_map_db,
[ich8_sata_ahci] = &ich8_map_db,
[ich6m_sata] = &ich6m_map_db,
[ich8_sata] = &ich8_map_db,
[ich8_2port_sata] = &ich8_2port_map_db,
[ich8m_apple_sata_ahci] = &ich8m_apple_map_db,
[tolapai_sata_ahci] = &tolapai_map_db,
[ich8m_apple_sata] = &ich8m_apple_map_db,
[tolapai_sata] = &tolapai_map_db,
};
static struct ata_port_info piix_port_info[] = {
@ -624,28 +488,18 @@ static struct ata_port_info piix_port_info[] = {
.port_ops = &piix_sata_ops,
},
[ich6_sata_ahci] =
[ich6m_sata] =
{
.flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
.flags = PIIX_SATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
[ich6m_sata_ahci] =
[ich8_sata] =
{
.flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
[ich8_sata_ahci] =
{
.flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI |
PIIX_FLAG_SIDPR,
.flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
@ -654,27 +508,25 @@ static struct ata_port_info piix_port_info[] = {
[ich8_2port_sata] =
{
.flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI |
PIIX_FLAG_SIDPR,
.flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
[tolapai_sata_ahci] =
[tolapai_sata] =
{
.flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI,
.flags = PIIX_SATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
.port_ops = &piix_sata_ops,
},
[ich8m_apple_sata_ahci] =
[ich8m_apple_sata] =
{
.flags = PIIX_SATA_FLAGS | PIIX_FLAG_AHCI |
PIIX_FLAG_SIDPR,
.flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
@ -683,7 +535,6 @@ static struct ata_port_info piix_port_info[] = {
[piix_pata_vmw] =
{
.sht = &piix_sht,
.flags = PIIX_PATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
@ -776,13 +627,7 @@ static int piix_pata_prereset(struct ata_link *link, unsigned long deadline)
if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
return -ENOENT;
return ata_std_prereset(link, deadline);
}
static void piix_pata_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, piix_pata_prereset, ata_std_softreset, NULL,
ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
/**
@ -1168,35 +1013,6 @@ static int piix_sidpr_scr_write(struct ata_port *ap, unsigned int reg, u32 val)
return 0;
}
static int piix_sidpr_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
int rc;
/* do hardreset */
rc = sata_link_hardreset(link, timing, deadline);
if (rc) {
ata_link_printk(link, KERN_ERR,
"COMRESET failed (errno=%d)\n", rc);
return rc;
}
/* TODO: phy layer with polling, timeouts, etc. */
if (ata_link_offline(link)) {
*class = ATA_DEV_NONE;
return 0;
}
return -EAGAIN;
}
static void piix_sidpr_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
piix_sidpr_hardreset, ata_std_postreset);
}
#ifdef CONFIG_PM
static int piix_broken_suspend(void)
{
@ -1633,6 +1449,16 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
if (rc)
return rc;
/* ICH6R may be driven by either ata_piix or ahci driver
* regardless of BIOS configuration. Make sure AHCI mode is
* off.
*/
if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2652) {
int rc = piix_disable_ahci(pdev);
if (rc)
return rc;
}
/* SATA map init can change port_info, do it before prepping host */
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
@ -1642,22 +1468,12 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
hpriv->map = piix_init_sata_map(pdev, port_info,
piix_map_db_table[ent->driver_data]);
rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
host->private_data = hpriv;
/* initialize controller */
if (port_flags & PIIX_FLAG_AHCI) {
u8 tmp;
pci_read_config_byte(pdev, PIIX_SCC, &tmp);
if (tmp == PIIX_AHCI_DEVICE) {
rc = piix_disable_ahci(pdev);
if (rc)
return rc;
}
}
if (port_flags & ATA_FLAG_SATA) {
piix_init_pcs(host, piix_map_db_table[ent->driver_data]);
piix_init_sidpr(host);
@ -1686,7 +1502,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
}
pci_set_master(pdev);
return ata_pci_activate_sff_host(host, ata_interrupt, &piix_sht);
return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht);
}
static int __init piix_init(void)

6
drivers/ata/libata-acpi.c
Просмотреть файл

@ -77,7 +77,7 @@ void ata_acpi_associate_sata_port(struct ata_port *ap)
{
WARN_ON(!(ap->flags & ATA_FLAG_ACPI_SATA));
if (!ap->nr_pmp_links) {
if (!sata_pmp_attached(ap)) {
acpi_integer adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
ap->link.device->acpi_handle =
@ -839,7 +839,8 @@ void ata_acpi_on_resume(struct ata_port *ap)
*/
ata_link_for_each_dev(dev, &ap->link) {
ata_acpi_clear_gtf(dev);
if (ata_dev_get_GTF(dev, NULL) >= 0)
if (ata_dev_enabled(dev) &&
ata_dev_get_GTF(dev, NULL) >= 0)
dev->flags |= ATA_DFLAG_ACPI_PENDING;
}
} else {
@ -849,6 +850,7 @@ void ata_acpi_on_resume(struct ata_port *ap)
*/
ata_link_for_each_dev(dev, &ap->link) {
ata_acpi_clear_gtf(dev);
if (ata_dev_enabled(dev))
dev->flags |= ATA_DFLAG_ACPI_PENDING;
}
}

2230
drivers/ata/libata-core.c
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

219
drivers/ata/libata-eh.c
Просмотреть файл

@ -873,9 +873,9 @@ int sata_async_notification(struct ata_port *ap)
if (rc == 0)
sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf);
if (!ap->nr_pmp_links || rc) {
if (!sata_pmp_attached(ap) || rc) {
/* PMP is not attached or SNTF is not available */
if (!ap->nr_pmp_links) {
if (!sata_pmp_attached(ap)) {
/* PMP is not attached. Check whether ATAPI
* AN is configured. If so, notify media
* change.
@ -1079,19 +1079,6 @@ void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
spin_lock_irqsave(ap->lock, flags);
/* Reset is represented by combination of actions and EHI
* flags. Suck in all related bits before clearing eh_info to
* avoid losing requested action.
*/
if (action & ATA_EH_RESET_MASK) {
ehc->i.action |= ehi->action & ATA_EH_RESET_MASK;
ehc->i.flags |= ehi->flags & ATA_EHI_RESET_MODIFIER_MASK;
/* make sure all reset actions are cleared & clear EHI flags */
action |= ATA_EH_RESET_MASK;
ehi->flags &= ~ATA_EHI_RESET_MODIFIER_MASK;
}
ata_eh_clear_action(link, dev, ehi, action);
if (!(ehc->i.flags & ATA_EHI_QUIET))
@ -1117,12 +1104,6 @@ void ata_eh_done(struct ata_link *link, struct ata_device *dev,
{
struct ata_eh_context *ehc = &link->eh_context;
/* if reset is complete, clear all reset actions & reset modifier */
if (action & ATA_EH_RESET_MASK) {
action |= ATA_EH_RESET_MASK;
ehc->i.flags &= ~ATA_EHI_RESET_MODIFIER_MASK;
}
ata_eh_clear_action(link, dev, &ehc->i, action);
}
@ -1329,20 +1310,20 @@ static void ata_eh_analyze_serror(struct ata_link *link)
if (serror & SERR_PERSISTENT) {
err_mask |= AC_ERR_ATA_BUS;
action |= ATA_EH_HARDRESET;
action |= ATA_EH_RESET;
}
if (serror &
(SERR_DATA_RECOVERED | SERR_COMM_RECOVERED | SERR_DATA)) {
err_mask |= AC_ERR_ATA_BUS;
action |= ATA_EH_SOFTRESET;
action |= ATA_EH_RESET;
}
if (serror & SERR_PROTOCOL) {
err_mask |= AC_ERR_HSM;
action |= ATA_EH_SOFTRESET;
action |= ATA_EH_RESET;
}
if (serror & SERR_INTERNAL) {
err_mask |= AC_ERR_SYSTEM;
action |= ATA_EH_HARDRESET;
action |= ATA_EH_RESET;
}
/* Determine whether a hotplug event has occurred. Both
@ -1448,7 +1429,7 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
if ((stat & (ATA_BUSY | ATA_DRQ | ATA_DRDY)) != ATA_DRDY) {
qc->err_mask |= AC_ERR_HSM;
return ATA_EH_SOFTRESET;
return ATA_EH_RESET;
}
if (stat & (ATA_ERR | ATA_DF))
@ -1484,7 +1465,7 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
}
if (qc->err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT | AC_ERR_ATA_BUS))
action |= ATA_EH_SOFTRESET;
action |= ATA_EH_RESET;
return action;
}
@ -1685,7 +1666,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
if (verdict & ATA_EH_SPDN_SPEED_DOWN) {
/* speed down SATA link speed if possible */
if (sata_down_spd_limit(link) == 0) {
action |= ATA_EH_HARDRESET;
action |= ATA_EH_RESET;
goto done;
}
@ -1705,7 +1686,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
dev->spdn_cnt++;
if (ata_down_xfermask_limit(dev, sel) == 0) {
action |= ATA_EH_SOFTRESET;
action |= ATA_EH_RESET;
goto done;
}
}
@ -1719,7 +1700,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
(dev->xfer_shift != ATA_SHIFT_PIO)) {
if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) {
dev->spdn_cnt = 0;
action |= ATA_EH_SOFTRESET;
action |= ATA_EH_RESET;
goto done;
}
}
@ -1764,9 +1745,9 @@ static void ata_eh_link_autopsy(struct ata_link *link)
ehc->i.serror |= serror;
ata_eh_analyze_serror(link);
} else if (rc != -EOPNOTSUPP) {
/* SError read failed, force hardreset and probing */
ata_ehi_schedule_probe(&ehc->i);
ehc->i.action |= ATA_EH_HARDRESET;
/* SError read failed, force reset and probing */
ehc->i.probe_mask |= ATA_ALL_DEVICES;
ehc->i.action |= ATA_EH_RESET;
ehc->i.err_mask |= AC_ERR_OTHER;
}
@ -1804,6 +1785,11 @@ static void ata_eh_link_autopsy(struct ata_link *link)
if (qc->flags & ATA_QCFLAG_SENSE_VALID)
qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER);
/* determine whether the command is worth retrying */
if (!(qc->err_mask & AC_ERR_INVALID) &&
((qc->flags & ATA_QCFLAG_IO) || qc->err_mask != AC_ERR_DEV))
qc->flags |= ATA_QCFLAG_RETRY;
/* accumulate error info */
ehc->i.dev = qc->dev;
all_err_mask |= qc->err_mask;
@ -1814,7 +1800,7 @@ static void ata_eh_link_autopsy(struct ata_link *link)
/* enforce default EH actions */
if (ap->pflags & ATA_PFLAG_FROZEN ||
all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT))
ehc->i.action |= ATA_EH_SOFTRESET;
ehc->i.action |= ATA_EH_RESET;
else if (((eflags & ATA_EFLAG_IS_IO) && all_err_mask) ||
(!(eflags & ATA_EFLAG_IS_IO) && (all_err_mask & ~AC_ERR_DEV)))
ehc->i.action |= ATA_EH_REVALIDATE;
@ -1867,7 +1853,7 @@ void ata_eh_autopsy(struct ata_port *ap)
/* Autopsy of fanout ports can affect host link autopsy.
* Perform host link autopsy last.
*/
if (ap->nr_pmp_links)
if (sata_pmp_attached(ap))
ata_eh_link_autopsy(&ap->link);
}
@ -2066,41 +2052,29 @@ static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
classes[dev->devno] = ATA_DEV_UNKNOWN;
rc = reset(link, classes, deadline);
if (rc)
return rc;
/* If any class isn't ATA_DEV_UNKNOWN, consider classification
* is complete and convert all ATA_DEV_UNKNOWN to
* ATA_DEV_NONE.
*/
/* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
ata_link_for_each_dev(dev, link)
if (classes[dev->devno] != ATA_DEV_UNKNOWN)
break;
if (dev) {
ata_link_for_each_dev(dev, link) {
if (classes[dev->devno] == ATA_DEV_UNKNOWN)
classes[dev->devno] = ATA_DEV_NONE;
}
}
return 0;
return rc;
}
static int ata_eh_followup_srst_needed(struct ata_link *link,
int rc, int classify,
const unsigned int *classes)
{
if (link->flags & ATA_LFLAG_NO_SRST)
if ((link->flags & ATA_LFLAG_NO_SRST) || ata_link_offline(link))
return 0;
if (rc == -EAGAIN)
if (rc == -EAGAIN) {
if (classify)
return 1;
rc = 0;
}
if (rc != 0)
return 0;
if ((link->ap->flags & ATA_FLAG_PMP) && ata_is_host_link(link))
return 1;
if (classify && !(link->flags & ATA_LFLAG_ASSUME_CLASS) &&
classes[0] == ATA_DEV_UNKNOWN)
if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
return 1;
return 0;
}
@ -2118,7 +2092,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
int try = 0;
struct ata_device *dev;
unsigned long deadline, now;
unsigned int tmp_action;
ata_reset_fn_t reset;
unsigned long flags;
u32 sstatus;
@ -2129,7 +2102,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
ap->pflags |= ATA_PFLAG_RESETTING;
spin_unlock_irqrestore(ap->lock, flags);
ata_eh_about_to_do(link, NULL, ehc->i.action & ATA_EH_RESET_MASK);
ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
ata_link_for_each_dev(dev, link) {
/* If we issue an SRST then an ATA drive (not ATAPI)
@ -2159,17 +2132,20 @@ int ata_eh_reset(struct ata_link *link, int classify,
goto done;
}
/* Determine which reset to use and record in ehc->i.action.
* prereset() may examine and modify it.
*/
if (softreset && (!hardreset || (!(lflags & ATA_LFLAG_NO_SRST) &&
!sata_set_spd_needed(link) &&
!(ehc->i.action & ATA_EH_HARDRESET))))
tmp_action = ATA_EH_SOFTRESET;
else
tmp_action = ATA_EH_HARDRESET;
ehc->i.action = (ehc->i.action & ~ATA_EH_RESET_MASK) | tmp_action;
/* prefer hardreset */
ehc->i.action &= ~ATA_EH_RESET;
if (hardreset) {
reset = hardreset;
ehc->i.action = ATA_EH_HARDRESET;
} else if (softreset) {
reset = softreset;
ehc->i.action = ATA_EH_SOFTRESET;
} else {
ata_link_printk(link, KERN_ERR, "BUG: no reset method, "
"please report to linux-ide@vger.kernel.org\n");
dump_stack();
return -EINVAL;
}
if (prereset) {
rc = prereset(link, jiffies + ATA_EH_PRERESET_TIMEOUT);
@ -2177,7 +2153,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
if (rc == -ENOENT) {
ata_link_printk(link, KERN_DEBUG,
"port disabled. ignoring.\n");
ehc->i.action &= ~ATA_EH_RESET_MASK;
ehc->i.action &= ~ATA_EH_RESET;
ata_link_for_each_dev(dev, link)
classes[dev->devno] = ATA_DEV_NONE;
@ -2190,12 +2166,8 @@ int ata_eh_reset(struct ata_link *link, int classify,
}
}
/* prereset() might have modified ehc->i.action */
if (ehc->i.action & ATA_EH_HARDRESET)
reset = hardreset;
else if (ehc->i.action & ATA_EH_SOFTRESET)
reset = softreset;
else {
/* prereset() might have cleared ATA_EH_RESET */
if (!(ehc->i.action & ATA_EH_RESET)) {
/* prereset told us not to reset, bang classes and return */
ata_link_for_each_dev(dev, link)
classes[dev->devno] = ATA_DEV_NONE;
@ -2203,14 +2175,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
goto out;
}
/* did prereset() screw up? if so, fix up to avoid oopsing */
if (!reset) {
if (softreset)
reset = softreset;
else
reset = hardreset;
}
retry:
deadline = jiffies + ata_eh_reset_timeouts[try++];
@ -2240,7 +2204,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
goto fail;
}
ata_eh_about_to_do(link, NULL, ATA_EH_RESET_MASK);
ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
rc = ata_do_reset(link, reset, classes, deadline);
}
@ -2248,21 +2212,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
if (rc && rc != -EAGAIN)
goto fail;
/* was classification successful? */
if (classify && classes[0] == ATA_DEV_UNKNOWN &&
!(lflags & ATA_LFLAG_ASSUME_CLASS)) {
if (try < max_tries) {
ata_link_printk(link, KERN_WARNING,
"classification failed\n");
rc = -EINVAL;
goto fail;
}
ata_link_printk(link, KERN_WARNING,
"classfication failed, assuming ATA\n");
lflags |= ATA_LFLAG_ASSUME_ATA;
}
done:
ata_link_for_each_dev(dev, link) {
/* After the reset, the device state is PIO 0 and the
@ -2290,7 +2239,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
postreset(link, classes);
/* reset successful, schedule revalidation */
ata_eh_done(link, NULL, ehc->i.action & ATA_EH_RESET_MASK);
ata_eh_done(link, NULL, ATA_EH_RESET);
ehc->i.action |= ATA_EH_REVALIDATE;
rc = 0;
@ -2305,6 +2254,11 @@ int ata_eh_reset(struct ata_link *link, int classify,
return rc;
fail:
/* if SCR isn't accessible on a fan-out port, PMP needs to be reset */
if (!ata_is_host_link(link) &&
sata_scr_read(link, SCR_STATUS, &sstatus))
rc = -ERESTART;
if (rc == -ERESTART || try >= max_tries)
goto out;
@ -2515,6 +2469,7 @@ static int ata_link_nr_vacant(struct ata_link *link)
static int ata_eh_skip_recovery(struct ata_link *link)
{
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
struct ata_device *dev;
@ -2522,9 +2477,13 @@ static int ata_eh_skip_recovery(struct ata_link *link)
if (link->flags & ATA_LFLAG_DISABLED)
return 1;
/* thaw frozen port, resume link and recover failed devices */
if ((link->ap->pflags & ATA_PFLAG_FROZEN) ||
(ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_link_nr_enabled(link))
/* thaw frozen port and recover failed devices */
if ((ap->pflags & ATA_PFLAG_FROZEN) || ata_link_nr_enabled(link))
return 0;
/* reset at least once if reset is requested */
if ((ehc->i.action & ATA_EH_RESET) &&
!(ehc->i.flags & ATA_EHI_DID_RESET))
return 0;
/* skip if class codes for all vacant slots are ATA_DEV_NONE */
@ -2548,7 +2507,7 @@ static int ata_eh_schedule_probe(struct ata_device *dev)
ata_eh_detach_dev(dev);
ata_dev_init(dev);
ehc->did_probe_mask |= (1 << dev->devno);
ehc->i.action |= ATA_EH_SOFTRESET;
ehc->i.action |= ATA_EH_RESET;
ehc->saved_xfer_mode[dev->devno] = 0;
ehc->saved_ncq_enabled &= ~(1 << dev->devno);
@ -2592,12 +2551,7 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
return 1;
} else {
/* soft didn't work? be haaaaard */
if (ehc->i.flags & ATA_EHI_DID_RESET)
ehc->i.action |= ATA_EH_HARDRESET;
else
ehc->i.action |= ATA_EH_SOFTRESET;
ehc->i.action |= ATA_EH_RESET;
return 0;
}
}
@ -2690,7 +2644,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
ehc->i.action = 0;
/* do we need to reset? */
if (ehc->i.action & ATA_EH_RESET_MASK)
if (ehc->i.action & ATA_EH_RESET)
reset = 1;
ata_link_for_each_dev(dev, link)
@ -2702,13 +2656,13 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
/* if PMP is attached, this function only deals with
* downstream links, port should stay thawed.
*/
if (!ap->nr_pmp_links)
if (!sata_pmp_attached(ap))
ata_eh_freeze_port(ap);
ata_port_for_each_link(link, ap) {
struct ata_eh_context *ehc = &link->eh_context;
if (!(ehc->i.action & ATA_EH_RESET_MASK))
if (!(ehc->i.action & ATA_EH_RESET))
continue;
rc = ata_eh_reset(link, ata_link_nr_vacant(link),
@ -2721,7 +2675,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
}
}
if (!ap->nr_pmp_links)
if (!sata_pmp_attached(ap))
ata_eh_thaw_port(ap);
}
@ -2765,7 +2719,7 @@ dev_fail:
/* PMP reset requires working host port.
* Can't retry if it's frozen.
*/
if (ap->nr_pmp_links)
if (sata_pmp_attached(ap))
goto out;
break;
}
@ -2817,18 +2771,11 @@ void ata_eh_finish(struct ata_port *ap)
/* FIXME: Once EH migration is complete,
* generate sense data in this function,
* considering both err_mask and tf.
*
* There's no point in retrying invalid
* (detected by libata) and non-IO device
* errors (rejected by device). Finish them
* immediately.
*/
if ((qc->err_mask & AC_ERR_INVALID) ||
(!(qc->flags & ATA_QCFLAG_IO) &&
qc->err_mask == AC_ERR_DEV))
ata_eh_qc_complete(qc);
else
if (qc->flags & ATA_QCFLAG_RETRY)
ata_eh_qc_retry(qc);
else
ata_eh_qc_complete(qc);
} else {
if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
ata_eh_qc_complete(qc);
@ -2848,6 +2795,7 @@ void ata_eh_finish(struct ata_port *ap)
/**
* ata_do_eh - do standard error handling
* @ap: host port to handle error for
*
* @prereset: prereset method (can be NULL)
* @softreset: softreset method (can be NULL)
* @hardreset: hardreset method (can be NULL)
@ -2878,6 +2826,27 @@ void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_eh_finish(ap);
}
/**
* ata_std_error_handler - standard error handler
* @ap: host port to handle error for
*
* Standard error handler
*
* LOCKING:
* Kernel thread context (may sleep).
*/
void ata_std_error_handler(struct ata_port *ap)
{
struct ata_port_operations *ops = ap->ops;
ata_reset_fn_t hardreset = ops->hardreset;
/* ignore built-in hardreset if SCR access is not available */
if (ata_is_builtin_hardreset(hardreset) && !sata_scr_valid(&ap->link))
hardreset = NULL;
ata_do_eh(ap, ops->prereset, ops->softreset, hardreset, ops->postreset);
}
#ifdef CONFIG_PM
/**
* ata_eh_handle_port_suspend - perform port suspend operation

245
drivers/ata/libata-pmp.c
Просмотреть файл

@ -11,6 +11,14 @@
#include <linux/libata.h>
#include "libata.h"
const struct ata_port_operations sata_pmp_port_ops = {
.inherits = &sata_port_ops,
.pmp_prereset = ata_std_prereset,
.pmp_hardreset = sata_std_hardreset,
.pmp_postreset = ata_std_postreset,
.error_handler = sata_pmp_error_handler,
};
/**
* sata_pmp_read - read PMP register
* @link: link to read PMP register for
@ -175,140 +183,6 @@ int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val)
return 0;
}
/**
* sata_pmp_std_prereset - prepare PMP link for reset
* @link: link to be reset
* @deadline: deadline jiffies for the operation
*
* @link is about to be reset. Initialize it.
*
* LOCKING:
* Kernel thread context (may sleep)
*
* RETURNS:
* 0 on success, -errno otherwise.
*/
int sata_pmp_std_prereset(struct ata_link *link, unsigned long deadline)
{
struct ata_eh_context *ehc = &link->eh_context;
const unsigned long *timing = sata_ehc_deb_timing(ehc);
int rc;
/* force HRST? */
if (link->flags & ATA_LFLAG_NO_SRST)
ehc->i.action |= ATA_EH_HARDRESET;
/* handle link resume */
if ((ehc->i.flags & ATA_EHI_RESUME_LINK) &&
(link->flags & ATA_LFLAG_HRST_TO_RESUME))
ehc->i.action |= ATA_EH_HARDRESET;
/* if we're about to do hardreset, nothing more to do */
if (ehc->i.action & ATA_EH_HARDRESET)
return 0;
/* resume link */
rc = sata_link_resume(link, timing, deadline);
if (rc) {
/* phy resume failed */
ata_link_printk(link, KERN_WARNING, "failed to resume link "
"for reset (errno=%d)\n", rc);
return rc;
}
/* clear SError bits including .X which blocks the port when set */
rc = sata_scr_write(link, SCR_ERROR, 0xffffffff);
if (rc) {
ata_link_printk(link, KERN_ERR,
"failed to clear SError (errno=%d)\n", rc);
return rc;
}
return 0;
}
/**
* sata_pmp_std_hardreset - standard hardreset method for PMP link
* @link: link to be reset
* @class: resulting class of attached device
* @deadline: deadline jiffies for the operation
*
* Hardreset PMP port @link. Note that this function doesn't
* wait for BSY clearance. There simply isn't a generic way to
* wait the event. Instead, this function return -EAGAIN thus
* telling libata-EH to followup with softreset.
*
* LOCKING:
* Kernel thread context (may sleep)
*
* RETURNS:
* 0 on success, -errno otherwise.
*/
int sata_pmp_std_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
u32 tmp;
int rc;
DPRINTK("ENTER\n");
/* do hardreset */
rc = sata_link_hardreset(link, timing, deadline);
if (rc) {
ata_link_printk(link, KERN_ERR,
"COMRESET failed (errno=%d)\n", rc);
goto out;
}
/* clear SError bits including .X which blocks the port when set */
rc = sata_scr_write(link, SCR_ERROR, 0xffffffff);
if (rc) {
ata_link_printk(link, KERN_ERR, "failed to clear SError "
"during hardreset (errno=%d)\n", rc);
goto out;
}
/* if device is present, follow up with srst to wait for !BSY */
if (ata_link_online(link))
rc = -EAGAIN;
out:
/* if SCR isn't accessible, we need to reset the PMP */
if (rc && rc != -EAGAIN && sata_scr_read(link, SCR_STATUS, &tmp))
rc = -ERESTART;
DPRINTK("EXIT, rc=%d\n", rc);
return rc;
}
/**
* ata_std_postreset - standard postreset method for PMP link
* @link: the target ata_link
* @classes: classes of attached devices
*
* This function is invoked after a successful reset. Note that
* the device might have been reset more than once using
* different reset methods before postreset is invoked.
*
* LOCKING:
* Kernel thread context (may sleep)
*/
void sata_pmp_std_postreset(struct ata_link *link, unsigned int *class)
{
u32 serror;
DPRINTK("ENTER\n");
/* clear SError */
if (sata_scr_read(link, SCR_ERROR, &serror) == 0)
sata_scr_write(link, SCR_ERROR, serror);
/* print link status */
sata_print_link_status(link);
DPRINTK("EXIT\n");
}
/**
* sata_pmp_read_gscr - read GSCR block of SATA PMP
* @dev: PMP device
@ -444,9 +318,8 @@ static int sata_pmp_init_links(struct ata_port *ap, int nr_ports)
struct ata_eh_context *ehc = &link->eh_context;
link->flags = 0;
ehc->i.probe_mask |= 1;
ehc->i.action |= ATA_EH_SOFTRESET;
ehc->i.flags |= ATA_EHI_RESUME_LINK;
ehc->i.probe_mask |= ATA_ALL_DEVICES;
ehc->i.action |= ATA_EH_RESET;
}
return 0;
@ -462,9 +335,6 @@ static void sata_pmp_quirks(struct ata_port *ap)
if (vendor == 0x1095 && devid == 0x3726) {
/* sil3726 quirks */
ata_port_for_each_link(link, ap) {
/* SError.N need a kick in the ass to get working */
link->flags |= ATA_LFLAG_HRST_TO_RESUME;
/* class code report is unreliable */
if (link->pmp < 5)
link->flags |= ATA_LFLAG_ASSUME_ATA;
@ -477,9 +347,6 @@ static void sata_pmp_quirks(struct ata_port *ap)
} else if (vendor == 0x1095 && devid == 0x4723) {
/* sil4723 quirks */
ata_port_for_each_link(link, ap) {
/* SError.N need a kick in the ass to get working */
link->flags |= ATA_LFLAG_HRST_TO_RESUME;
/* class code report is unreliable */
if (link->pmp < 2)
link->flags |= ATA_LFLAG_ASSUME_ATA;
@ -492,9 +359,6 @@ static void sata_pmp_quirks(struct ata_port *ap)
} else if (vendor == 0x1095 && devid == 0x4726) {
/* sil4726 quirks */
ata_port_for_each_link(link, ap) {
/* SError.N need a kick in the ass to get working */
link->flags |= ATA_LFLAG_HRST_TO_RESUME;
/* Class code report is unreliable and SRST
* times out under certain configurations.
* Config device can be at port 0 or 5 and
@ -522,13 +386,6 @@ static void sata_pmp_quirks(struct ata_port *ap)
* otherwise. Don't try hard to recover it.
*/
ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY;
} else if (vendor == 0x11ab && devid == 0x4140) {
/* Marvell 88SM4140 quirks. Fan-out ports require PHY
* reset to work; other than that, it behaves very
* nicely.
*/
ata_port_for_each_link(link, ap)
link->flags |= ATA_LFLAG_HRST_TO_RESUME;
}
}
@ -554,7 +411,7 @@ int sata_pmp_attach(struct ata_device *dev)
int rc;
/* is it hanging off the right place? */
if (!(ap->flags & ATA_FLAG_PMP)) {
if (!sata_pmp_supported(ap)) {
ata_dev_printk(dev, KERN_ERR,
"host does not support Port Multiplier\n");
return -EINVAL;
@ -840,13 +697,12 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
retry:
ehc->classes[0] = ATA_DEV_UNKNOWN;
if (ehc->i.action & ATA_EH_RESET_MASK) {
if (ehc->i.action & ATA_EH_RESET) {
struct ata_link *tlink;
ata_eh_freeze_port(ap);
/* reset */
ehc->i.action = ATA_EH_HARDRESET;
rc = ata_eh_reset(link, 0, prereset, softreset, hardreset,
postreset);
if (rc) {
@ -858,8 +714,12 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
ata_eh_thaw_port(ap);
/* PMP is reset, SErrors cannot be trusted, scan all */
ata_port_for_each_link(tlink, ap)
ata_ehi_schedule_probe(&tlink->eh_context.i);
ata_port_for_each_link(tlink, ap) {
struct ata_eh_context *ehc = &tlink->eh_context;
ehc->i.probe_mask |= ATA_ALL_DEVICES;
ehc->i.action |= ATA_EH_RESET;
}
}
/* If revalidation is requested, revalidate and reconfigure;
@ -874,7 +734,7 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
tries--;
if (rc == -ENODEV) {
ehc->i.probe_mask |= 1;
ehc->i.probe_mask |= ATA_ALL_DEVICES;
detach = 1;
/* give it just two more chances */
tries = min(tries, 2);
@ -890,11 +750,11 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
reval_failed = 1;
ata_dev_printk(dev, KERN_WARNING,
"retrying hardreset%s\n",
"retrying reset%s\n",
sleep ? " in 5 secs" : "");
if (sleep)
ssleep(5);
ehc->i.action |= ATA_EH_HARDRESET;
ehc->i.action |= ATA_EH_RESET;
goto retry;
} else {
ata_dev_printk(dev, KERN_ERR, "failed to recover PMP "
@ -938,10 +798,8 @@ static int sata_pmp_eh_handle_disabled_links(struct ata_port *ap)
/* Some PMPs require hardreset sequence to get
* SError.N working.
*/
if ((link->flags & ATA_LFLAG_HRST_TO_RESUME) &&
(link->eh_context.i.flags & ATA_EHI_RESUME_LINK))
sata_link_hardreset(link, sata_deb_timing_normal,
jiffies + ATA_TMOUT_INTERNAL_QUICK);
jiffies + ATA_TMOUT_INTERNAL_QUICK, NULL, NULL);
/* unconditionally clear SError.N */
rc = sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
@ -987,14 +845,6 @@ static int sata_pmp_handle_link_fail(struct ata_link *link, int *link_tries)
/**
* sata_pmp_eh_recover - recover PMP-enabled port
* @ap: ATA port to recover
* @prereset: prereset method (can be NULL)
* @softreset: softreset method
* @hardreset: hardreset method
* @postreset: postreset method (can be NULL)
* @pmp_prereset: PMP prereset method (can be NULL)
* @pmp_softreset: PMP softreset method (can be NULL)
* @pmp_hardreset: PMP hardreset method (can be NULL)
* @pmp_postreset: PMP postreset method (can be NULL)
*
* Drive EH recovery operation for PMP enabled port @ap. This
* function recovers host and PMP ports with proper retrials and
@ -1007,12 +857,9 @@ static int sata_pmp_handle_link_fail(struct ata_link *link, int *link_tries)
* RETURNS:
* 0 on success, -errno on failure.
*/
static int sata_pmp_eh_recover(struct ata_port *ap,
ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
ata_reset_fn_t hardreset, ata_postreset_fn_t postreset,
ata_prereset_fn_t pmp_prereset, ata_reset_fn_t pmp_softreset,
ata_reset_fn_t pmp_hardreset, ata_postreset_fn_t pmp_postreset)
static int sata_pmp_eh_recover(struct ata_port *ap)
{
struct ata_port_operations *ops = ap->ops;
int pmp_tries, link_tries[SATA_PMP_MAX_PORTS];
struct ata_link *pmp_link = &ap->link;
struct ata_device *pmp_dev = pmp_link->device;
@ -1029,9 +876,9 @@ static int sata_pmp_eh_recover(struct ata_port *ap,
retry:
/* PMP attached? */
if (!ap->nr_pmp_links) {
rc = ata_eh_recover(ap, prereset, softreset, hardreset,
postreset, NULL);
if (!sata_pmp_attached(ap)) {
rc = ata_eh_recover(ap, ops->prereset, ops->softreset,
ops->hardreset, ops->postreset, NULL);
if (rc) {
ata_link_for_each_dev(dev, &ap->link)
ata_dev_disable(dev);
@ -1049,8 +896,8 @@ static int sata_pmp_eh_recover(struct ata_port *ap,
}
/* recover pmp */
rc = sata_pmp_eh_recover_pmp(ap, prereset, softreset, hardreset,
postreset);
rc = sata_pmp_eh_recover_pmp(ap, ops->prereset, ops->softreset,
ops->hardreset, ops->postreset);
if (rc)
goto pmp_fail;
@ -1060,8 +907,8 @@ static int sata_pmp_eh_recover(struct ata_port *ap,
goto pmp_fail;
/* recover links */
rc = ata_eh_recover(ap, pmp_prereset, pmp_softreset, pmp_hardreset,
pmp_postreset, &link);
rc = ata_eh_recover(ap, ops->pmp_prereset, ops->pmp_softreset,
ops->pmp_hardreset, ops->pmp_postreset, &link);
if (rc)
goto link_fail;
@ -1124,7 +971,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap,
link_fail:
if (sata_pmp_handle_link_fail(link, link_tries)) {
pmp_ehc->i.action |= ATA_EH_HARDRESET;
pmp_ehc->i.action |= ATA_EH_RESET;
goto retry;
}
@ -1136,13 +983,13 @@ static int sata_pmp_eh_recover(struct ata_port *ap,
if (ap->pflags & ATA_PFLAG_UNLOADING)
return rc;
if (!ap->nr_pmp_links)
if (!sata_pmp_attached(ap))
goto retry;
if (--pmp_tries) {
ata_port_printk(ap, KERN_WARNING,
"failed to recover PMP, retrying in 5 secs\n");
pmp_ehc->i.action |= ATA_EH_HARDRESET;
pmp_ehc->i.action |= ATA_EH_RESET;
ssleep(5);
goto retry;
}
@ -1157,16 +1004,8 @@ static int sata_pmp_eh_recover(struct ata_port *ap,
}
/**
* sata_pmp_do_eh - do standard error handling for PMP-enabled host
* sata_pmp_error_handler - do standard error handling for PMP-enabled host
* @ap: host port to handle error for
* @prereset: prereset method (can be NULL)
* @softreset: softreset method
* @hardreset: hardreset method
* @postreset: postreset method (can be NULL)
* @pmp_prereset: PMP prereset method (can be NULL)
* @pmp_softreset: PMP softreset method (can be NULL)
* @pmp_hardreset: PMP hardreset method (can be NULL)
* @pmp_postreset: PMP postreset method (can be NULL)
*
* Perform standard error handling sequence for PMP-enabled host
* @ap.
@ -1174,16 +1013,14 @@ static int sata_pmp_eh_recover(struct ata_port *ap,
* LOCKING:
* Kernel thread context (may sleep).
*/
void sata_pmp_do_eh(struct ata_port *ap,
ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
ata_reset_fn_t hardreset, ata_postreset_fn_t postreset,
ata_prereset_fn_t pmp_prereset, ata_reset_fn_t pmp_softreset,
ata_reset_fn_t pmp_hardreset, ata_postreset_fn_t pmp_postreset)
void sata_pmp_error_handler(struct ata_port *ap)
{
ata_eh_autopsy(ap);
ata_eh_report(ap);
sata_pmp_eh_recover(ap, prereset, softreset, hardreset, postreset,
pmp_prereset, pmp_softreset, pmp_hardreset,
pmp_postreset);
sata_pmp_eh_recover(ap);
ata_eh_finish(ap);
}
EXPORT_SYMBOL_GPL(sata_pmp_port_ops);
EXPORT_SYMBOL_GPL(sata_pmp_qc_defer_cmd_switch);
EXPORT_SYMBOL_GPL(sata_pmp_error_handler);

17
drivers/ata/libata-scsi.c
Просмотреть файл

@ -2393,7 +2393,9 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
/* FIXME: is this needed? */
memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
ap->ops->tf_read(ap, &qc->tf);
#ifdef CONFIG_ATA_SFF
ap->ops->sff_tf_read(ap, &qc->tf);
#endif
/* fill these in, for the case where they are -not- overwritten */
cmd->sense_buffer[0] = 0x70;
@ -2615,7 +2617,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
static struct ata_device *ata_find_dev(struct ata_port *ap, int devno)
{
if (ap->nr_pmp_links == 0) {
if (!sata_pmp_attached(ap)) {
if (likely(devno < ata_link_max_devices(&ap->link)))
return &ap->link.device[devno];
} else {
@ -2632,7 +2634,7 @@ static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap,
int devno;
/* skip commands not addressed to targets we simulate */
if (ap->nr_pmp_links == 0) {
if (!sata_pmp_attached(ap)) {
if (unlikely(scsidev->channel || scsidev->lun))
return NULL;
devno = scsidev->id;
@ -3490,7 +3492,7 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
if (lun != SCAN_WILD_CARD && lun)
return -EINVAL;
if (ap->nr_pmp_links == 0) {
if (!sata_pmp_attached(ap)) {
if (channel != SCAN_WILD_CARD && channel)
return -EINVAL;
devno = id;
@ -3507,8 +3509,8 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
ata_port_for_each_link(link, ap) {
struct ata_eh_info *ehi = &link->eh_info;
ehi->probe_mask |= (1 << ata_link_max_devices(link)) - 1;
ehi->action |= ATA_EH_SOFTRESET;
ehi->probe_mask |= ATA_ALL_DEVICES;
ehi->action |= ATA_EH_RESET;
}
} else {
struct ata_device *dev = ata_find_dev(ap, devno);
@ -3516,8 +3518,7 @@ static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
if (dev) {
struct ata_eh_info *ehi = &dev->link->eh_info;
ehi->probe_mask |= 1 << dev->devno;
ehi->action |= ATA_EH_SOFTRESET;
ehi->flags |= ATA_EHI_RESUME_LINK;
ehi->action |= ATA_EH_RESET;
} else
rc = -EINVAL;
}

2446
drivers/ata/libata-sff.c
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

55
drivers/ata/libata.h
Просмотреть файл

@ -38,6 +38,17 @@ struct ata_scsi_args {
void (*done)(struct scsi_cmnd *);
};
static inline int ata_is_builtin_hardreset(ata_reset_fn_t reset)
{
if (reset == sata_std_hardreset)
return 1;
#ifdef CONFIG_ATA_SFF
if (reset == sata_sff_hardreset)
return 1;
#endif
return 0;
}
/* libata-core.c */
enum {
/* flags for ata_dev_read_id() */
@ -61,12 +72,16 @@ extern int libata_fua;
extern int libata_noacpi;
extern int libata_allow_tpm;
extern void ata_force_cbl(struct ata_port *ap);
extern u64 ata_tf_to_lba(const struct ata_taskfile *tf);
extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf);
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
unsigned int tag);
extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
extern void ata_dev_disable(struct ata_device *dev);
extern void ata_pio_queue_task(struct ata_port *ap, void *data,
unsigned long delay);
extern void ata_port_flush_task(struct ata_port *ap);
extern unsigned ata_exec_internal(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
@ -77,6 +92,8 @@ extern unsigned ata_exec_internal_sg(struct ata_device *dev,
int dma_dir, struct scatterlist *sg,
unsigned int n_elem, unsigned long timeout);
extern unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd);
extern int ata_wait_ready(struct ata_link *link, unsigned long deadline,
int (*check_ready)(struct ata_link *link));
extern int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
unsigned int flags, u16 *id);
extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags);
@ -91,10 +108,7 @@ extern void ata_qc_free(struct ata_queued_cmd *qc);
extern void ata_qc_issue(struct ata_queued_cmd *qc);
extern void __ata_qc_complete(struct ata_queued_cmd *qc);
extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
extern void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep);
extern void swap_buf_le16(u16 *buf, unsigned int buf_words);
extern int ata_flush_cache(struct ata_device *dev);
extern void ata_dev_init(struct ata_device *dev);
extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp);
extern int sata_link_init_spd(struct ata_link *link);
@ -165,11 +179,6 @@ extern void ata_schedule_scsi_eh(struct Scsi_Host *shost);
extern void ata_scsi_dev_rescan(struct work_struct *work);
extern int ata_bus_probe(struct ata_port *ap);
/* libata-pmp.c */
extern int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val);
extern int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val);
extern int sata_pmp_attach(struct ata_device *dev);
/* libata-eh.c */
extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
extern void ata_scsi_error(struct Scsi_Host *host);
@ -193,8 +202,34 @@ extern int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
struct ata_link **r_failed_disk);
extern void ata_eh_finish(struct ata_port *ap);
/* libata-sff.c */
extern u8 ata_irq_on(struct ata_port *ap);
/* libata-pmp.c */
#ifdef CONFIG_SATA_PMP
extern int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val);
extern int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val);
extern int sata_pmp_attach(struct ata_device *dev);
#else /* CONFIG_SATA_PMP */
static inline int sata_pmp_scr_read(struct ata_link *link, int reg, u32 *val)
{
return -EINVAL;
}
static inline int sata_pmp_scr_write(struct ata_link *link, int reg, u32 val)
{
return -EINVAL;
}
static inline int sata_pmp_attach(struct ata_device *dev)
{
return -EINVAL;
}
#endif /* CONFIG_SATA_PMP */
/* libata-sff.c */
#ifdef CONFIG_ATA_SFF
extern void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep);
extern u8 ata_irq_on(struct ata_port *ap);
extern void ata_pio_task(struct work_struct *work);
#endif /* CONFIG_ATA_SFF */
#endif /* __LIBATA_H__ */

83
drivers/ata/pata_acpi.c
Просмотреть файл

@ -47,7 +47,7 @@ static int pacpi_pre_reset(struct ata_link *link, unsigned long deadline)
if (ap->acpi_handle == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0)
return -ENODEV;
return ata_std_prereset(link, deadline);
return ata_sff_prereset(link, deadline);
}
/**
@ -67,20 +67,6 @@ static int pacpi_cable_detect(struct ata_port *ap)
return ATA_CBL_PATA40;
}
/**
* pacpi_error_handler - Setup and error handler
* @ap: Port to handle
*
* LOCKING:
* None (inherited from caller).
*/
static void pacpi_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, pacpi_pre_reset, ata_std_softreset, NULL,
ata_std_postreset);
}
/**
* pacpi_discover_modes - filter non ACPI modes
* @adev: ATA device
@ -120,7 +106,7 @@ static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device
static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask)
{
struct pata_acpi *acpi = adev->link->ap->private_data;
return ata_pci_default_filter(adev, mask & acpi->mask[adev->devno]);
return ata_bmdma_mode_filter(adev, mask & acpi->mask[adev->devno]);
}
/**
@ -176,7 +162,7 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
}
/**
* pacpi_qc_issue_prot - command issue
* pacpi_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@ -184,14 +170,14 @@ static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
* neccessary.
*/
static unsigned int pacpi_qc_issue_prot(struct ata_queued_cmd *qc)
static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
struct pata_acpi *acpi = ap->private_data;
if (acpi->gtm.flags & 0x10)
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
if (adev != acpi->last) {
pacpi_set_piomode(ap, adev);
@ -199,7 +185,7 @@ static unsigned int pacpi_qc_issue_prot(struct ata_queued_cmd *qc)
pacpi_set_dmamode(ap, adev);
acpi->last = adev;
}
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
/**
@ -232,57 +218,17 @@ static int pacpi_port_start(struct ata_port *ap)
}
static struct scsi_host_template pacpi_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
/* Use standard CHS mapping rules */
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations pacpi_ops = {
static struct ata_port_operations pacpi_ops = {
.inherits = &ata_bmdma_port_ops,
.qc_issue = pacpi_qc_issue,
.cable_detect = pacpi_cable_detect,
.mode_filter = pacpi_mode_filter,
.set_piomode = pacpi_set_piomode,
.set_dmamode = pacpi_set_dmamode,
.mode_filter = pacpi_mode_filter,
/* Task file is PCI ATA format, use helpers */
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = pacpi_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = pacpi_cable_detect,
/* BMDMA handling is PCI ATA format, use helpers */
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = pacpi_qc_issue_prot,
.data_xfer = ata_data_xfer,
/* Timeout handling */
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
/* Generic PATA PCI ATA helpers */
.prereset = pacpi_pre_reset,
.port_start = pacpi_port_start,
};
@ -304,7 +250,6 @@ static const struct ata_port_operations pacpi_ops = {
static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.sht = &pacpi_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f,
@ -314,7 +259,7 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &pacpi_ops,
};
const struct ata_port_info *ppi[] = { &info, NULL };
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL);
}
static const struct pci_device_id pacpi_pci_tbl[] = {

169
drivers/ata/pata_ali.c
Просмотреть файл

@ -121,7 +121,7 @@ static unsigned long ali_20_filter(struct ata_device *adev, unsigned long mask)
ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
if (strstr(model_num, "WDC"))
return mask &= ~ATA_MASK_UDMA;
return ata_pci_default_filter(adev, mask);
return ata_bmdma_mode_filter(adev, mask);
}
/**
@ -339,21 +339,7 @@ static int ali_check_atapi_dma(struct ata_queued_cmd *qc)
}
static struct scsi_host_template ali_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
/*
@ -361,29 +347,15 @@ static struct scsi_host_template ali_sht = {
*/
static struct ata_port_operations ali_early_port_ops = {
.set_piomode = ali_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &ata_sff_port_ops,
.cable_detect = ata_cable_40wire,
.set_piomode = ali_set_piomode,
};
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
static const struct ata_port_operations ali_dma_base_ops = {
.inherits = &ata_bmdma_port_ops,
.set_piomode = ali_set_piomode,
.set_dmamode = ali_set_dmamode,
};
/*
@ -391,115 +363,31 @@ static struct ata_port_operations ali_early_port_ops = {
* detect
*/
static struct ata_port_operations ali_20_port_ops = {
.set_piomode = ali_set_piomode,
.set_dmamode = ali_set_dmamode,
.mode_filter = ali_20_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_atapi_dma = ali_check_atapi_dma,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.dev_config = ali_lock_sectors,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &ali_dma_base_ops,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.mode_filter = ali_20_filter,
.check_atapi_dma = ali_check_atapi_dma,
.dev_config = ali_lock_sectors,
};
/*
* Port operations for DMA capable ALi with cable detect
*/
static struct ata_port_operations ali_c2_port_ops = {
.set_piomode = ali_set_piomode,
.set_dmamode = ali_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.inherits = &ali_dma_base_ops,
.check_atapi_dma = ali_check_atapi_dma,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.dev_config = ali_lock_sectors,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ali_c2_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.dev_config = ali_lock_sectors,
};
/*
* Port operations for DMA capable ALi with cable detect and LBA48
*/
static struct ata_port_operations ali_c5_port_ops = {
.set_piomode = ali_set_piomode,
.set_dmamode = ali_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.inherits = &ali_dma_base_ops,
.check_atapi_dma = ali_check_atapi_dma,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.dev_config = ali_warn_atapi_dma,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ali_c2_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
@ -561,7 +449,7 @@ static void ali_init_chipset(struct pci_dev *pdev)
}
pci_dev_put(isa_bridge);
pci_dev_put(north);
ata_pci_clear_simplex(pdev);
ata_pci_bmdma_clear_simplex(pdev);
}
/**
* ali_init_one - discovery callback
@ -575,14 +463,12 @@ static void ali_init_chipset(struct pci_dev *pdev)
static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info_early = {
.sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.port_ops = &ali_early_port_ops
};
/* Revision 0x20 added DMA */
static const struct ata_port_info info_20 = {
.sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -590,7 +476,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
/* Revision 0x20 with support logic added UDMA */
static const struct ata_port_info info_20_udma = {
.sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -599,7 +484,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
/* Revision 0xC2 adds UDMA66 */
static const struct ata_port_info info_c2 = {
.sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -608,7 +492,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
/* Revision 0xC3 is UDMA66 for now */
static const struct ata_port_info info_c3 = {
.sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -617,7 +500,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
/* Revision 0xC4 is UDMA100 */
static const struct ata_port_info info_c4 = {
.sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -626,7 +508,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
/* Revision 0xC5 is UDMA133 with LBA48 DMA */
static const struct ata_port_info info_c5 = {
.sht = &ali_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -637,6 +518,11 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
const struct ata_port_info *ppi[] = { NULL, NULL };
u8 tmp;
struct pci_dev *isa_bridge;
int rc;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/*
* The chipset revision selects the driver operations and
@ -666,14 +552,21 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
ppi[0] = &info_20_udma;
pci_dev_put(isa_bridge);
}
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL);
}
#ifdef CONFIG_PM
static int ali_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
ali_init_chipset(pdev);
return ata_pci_device_resume(pdev);
ata_host_resume(host);
return 0;
}
#endif

268
drivers/ata/pata_amd.c
Просмотреть файл

@ -56,7 +56,9 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse
u8 t;
T = 1000000000 / amd_clock;
UT = T / min_t(int, max_t(int, clock, 1), 2);
UT = T;
if (clock >= 2)
UT = T / 2;
if (ata_timing_compute(adev, speed, &at, T, UT) < 0) {
dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", speed);
@ -141,13 +143,7 @@ static int amd_pre_reset(struct ata_link *link, unsigned long deadline)
if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no]))
return -ENOENT;
return ata_std_prereset(link, deadline);
}
static void amd_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, amd_pre_reset, ata_std_softreset, NULL,
ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
static int amd_cable_detect(struct ata_port *ap)
@ -297,14 +293,7 @@ static int nv_pre_reset(struct ata_link *link, unsigned long deadline)
if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no]))
return -ENOENT;
return ata_std_prereset(link, deadline);
}
static void nv_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, nv_pre_reset,
ata_std_softreset, NULL,
ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
/**
@ -353,228 +342,66 @@ static void nv_host_stop(struct ata_host *host)
}
static struct scsi_host_template amd_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations amd_base_port_ops = {
.inherits = &ata_bmdma_port_ops,
.prereset = amd_pre_reset,
};
static struct ata_port_operations amd33_port_ops = {
.inherits = &amd_base_port_ops,
.cable_detect = ata_cable_40wire,
.set_piomode = amd33_set_piomode,
.set_dmamode = amd33_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = amd_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static struct ata_port_operations amd66_port_ops = {
.inherits = &amd_base_port_ops,
.cable_detect = ata_cable_unknown,
.set_piomode = amd66_set_piomode,
.set_dmamode = amd66_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = amd_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_unknown,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static struct ata_port_operations amd100_port_ops = {
.inherits = &amd_base_port_ops,
.cable_detect = ata_cable_unknown,
.set_piomode = amd100_set_piomode,
.set_dmamode = amd100_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = amd_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_unknown,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static struct ata_port_operations amd133_port_ops = {
.inherits = &amd_base_port_ops,
.cable_detect = amd_cable_detect,
.set_piomode = amd133_set_piomode,
.set_dmamode = amd133_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
};
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = amd_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = amd_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
static const struct ata_port_operations nv_base_port_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = ata_cable_ignore,
.mode_filter = nv_mode_filter,
.prereset = nv_pre_reset,
.host_stop = nv_host_stop,
};
static struct ata_port_operations nv100_port_ops = {
.inherits = &nv_base_port_ops,
.set_piomode = nv100_set_piomode,
.set_dmamode = nv100_set_dmamode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = nv_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_ignore,
.mode_filter = nv_mode_filter,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.host_stop = nv_host_stop,
};
static struct ata_port_operations nv133_port_ops = {
.inherits = &nv_base_port_ops,
.set_piomode = nv133_set_piomode,
.set_dmamode = nv133_set_dmamode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = nv_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_ignore,
.mode_filter = nv_mode_filter,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.host_stop = nv_host_stop,
};
static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info[10] = {
{ /* 0: AMD 7401 */
.sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07, /* No SWDMA */
@ -582,7 +409,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &amd33_port_ops
},
{ /* 1: Early AMD7409 - no swdma */
.sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -590,7 +416,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &amd66_port_ops
},
{ /* 2: AMD 7409, no swdma errata */
.sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -598,7 +423,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &amd66_port_ops
},
{ /* 3: AMD 7411 */
.sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -606,7 +430,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &amd100_port_ops
},
{ /* 4: AMD 7441 */
.sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -614,7 +437,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &amd100_port_ops
},
{ /* 5: AMD 8111*/
.sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -622,7 +444,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &amd133_port_ops
},
{ /* 6: AMD 8111 UDMA 100 (Serenade) */
.sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -630,7 +451,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &amd133_port_ops
},
{ /* 7: Nvidia Nforce */
.sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -638,7 +458,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &nv100_port_ops
},
{ /* 8: Nvidia Nforce2 and later */
.sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -646,7 +465,6 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &nv133_port_ops
},
{ /* 9: AMD CS5536 (Geode companion) */
.sht = &amd_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -654,15 +472,20 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &amd100_port_ops
}
};
struct ata_port_info pi;
const struct ata_port_info *ppi[] = { &pi, NULL };
const struct ata_port_info *ppi[] = { NULL, NULL };
static int printed_version;
int type = id->driver_data;
void *hpriv = NULL;
u8 fifo;
int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
return rc;
pci_read_config_byte(pdev, 0x41, &fifo);
/* Check for AMD7409 without swdma errata and if found adjust type */
@ -677,10 +500,10 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
/*
* Okay, type is determined now. Apply type-specific workarounds.
*/
pi = info[type];
ppi[0] = &info[type];
if (type < 3)
ata_pci_clear_simplex(pdev);
ata_pci_bmdma_clear_simplex(pdev);
/* Check for AMD7411 */
if (type == 3)
@ -696,16 +519,23 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
u32 udma;
pci_read_config_dword(pdev, 0x60, &udma);
pi.private_data = (void *)(unsigned long)udma;
hpriv = (void *)(unsigned long)udma;
}
/* And fire it up */
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv);
}
#ifdef CONFIG_PM
static int amd_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
if (pdev->vendor == PCI_VENDOR_ID_AMD) {
u8 fifo;
pci_read_config_byte(pdev, 0x41, &fifo);
@ -716,9 +546,11 @@ static int amd_reinit_one(struct pci_dev *pdev)
pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 ||
pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
ata_pci_clear_simplex(pdev);
ata_pci_bmdma_clear_simplex(pdev);
}
return ata_pci_device_resume(pdev);
ata_host_resume(host);
return 0;
}
#endif

125
drivers/ata/pata_artop.c
Просмотреть файл

@ -52,22 +52,7 @@ static int artop6210_pre_reset(struct ata_link *link, unsigned long deadline)
if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
return -ENOENT;
return ata_std_prereset(link, deadline);
}
/**
* artop6210_error_handler - Probe specified port on PATA host controller
* @ap: Port to probe
*
* LOCKING:
* None (inherited from caller).
*/
static void artop6210_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, artop6210_pre_reset,
ata_std_softreset, NULL,
ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
/**
@ -93,7 +78,7 @@ static int artop6260_pre_reset(struct ata_link *link, unsigned long deadline)
if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
return -ENOENT;
return ata_std_prereset(link, deadline);
return ata_sff_prereset(link, deadline);
}
/**
@ -113,21 +98,6 @@ static int artop6260_cable_detect(struct ata_port *ap)
return ATA_CBL_PATA80;
}
/**
* artop6260_error_handler - Probe specified port on PATA host controller
* @ap: Port to probe
*
* LOCKING:
* None (inherited from caller).
*/
static void artop6260_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, artop6260_pre_reset,
ata_std_softreset, NULL,
ata_std_postreset);
}
/**
* artop6210_load_piomode - Load a set of PATA PIO timings
* @ap: Port whose timings we are configuring
@ -314,85 +284,23 @@ static void artop6260_set_dmamode (struct ata_port *ap, struct ata_device *adev)
}
static struct scsi_host_template artop_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations artop6210_ops = {
static struct ata_port_operations artop6210_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = ata_cable_40wire,
.set_piomode = artop6210_set_piomode,
.set_dmamode = artop6210_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = artop6210_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.prereset = artop6210_pre_reset,
};
static const struct ata_port_operations artop6260_ops = {
static struct ata_port_operations artop6260_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = artop6260_cable_detect,
.set_piomode = artop6260_set_piomode,
.set_dmamode = artop6260_set_dmamode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = artop6260_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = artop6260_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.prereset = artop6260_pre_reset,
};
@ -414,7 +322,6 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
{
static int printed_version;
static const struct ata_port_info info_6210 = {
.sht = &artop_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@ -422,7 +329,6 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &artop6210_ops,
};
static const struct ata_port_info info_626x = {
.sht = &artop_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@ -430,7 +336,6 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &artop6260_ops,
};
static const struct ata_port_info info_628x = {
.sht = &artop_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@ -438,7 +343,6 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &artop6260_ops,
};
static const struct ata_port_info info_628x_fast = {
.sht = &artop_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@ -446,11 +350,16 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &artop6260_ops,
};
const struct ata_port_info *ppi[] = { NULL, NULL };
int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
return rc;
if (id->driver_data == 0) { /* 6210 variant */
ppi[0] = &info_6210;
ppi[1] = &ata_dummy_port_info;
@ -491,7 +400,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
BUG_ON(ppi[0] == NULL);
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL);
}
static const struct pci_device_id artop_pci_tbl[] = {

46
drivers/ata/pata_at32.c
Просмотреть файл

@ -166,52 +166,14 @@ static void pata_at32_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
}
static void pata_at32_irq_clear(struct ata_port *ap)
{
/* No DMA controller yet */
}
static struct scsi_host_template at32_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations at32_port_ops = {
.set_piomode = pata_at32_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.exec_command = ata_exec_command,
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &ata_sff_port_ops,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_clear = pata_at32_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.set_piomode = pata_at32_set_piomode,
};
static int __init pata_at32_init_one(struct device *dev,
@ -261,7 +223,7 @@ static int __init pata_at32_init_one(struct device *dev,
host->private_data = info;
/* Register ATA device and return */
return ata_host_activate(host, info->irq, ata_interrupt,
return ata_host_activate(host, info->irq, ata_sff_interrupt,
IRQF_SHARED | IRQF_TRIGGER_RISING,
&at32_sht);
}

57
drivers/ata/pata_atiixp.c
Просмотреть файл

@ -45,12 +45,7 @@ static int atiixp_pre_reset(struct ata_link *link, unsigned long deadline)
if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
return -ENOENT;
return ata_std_prereset(link, deadline);
}
static void atiixp_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, atiixp_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
static int atiixp_cable_detect(struct ata_port *ap)
@ -221,60 +216,26 @@ static void atiixp_bmdma_stop(struct ata_queued_cmd *qc)
}
static struct scsi_host_template atiixp_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
ATA_BMDMA_SHT(DRV_NAME),
.sg_tablesize = LIBATA_DUMB_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
static struct ata_port_operations atiixp_port_ops = {
.set_piomode = atiixp_set_piomode,
.set_dmamode = atiixp_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.inherits = &ata_bmdma_port_ops,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = atiixp_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = atiixp_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.qc_prep = ata_sff_dumb_qc_prep,
.bmdma_start = atiixp_bmdma_start,
.bmdma_stop = atiixp_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_dumb_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.cable_detect = atiixp_cable_detect,
.set_piomode = atiixp_set_piomode,
.set_dmamode = atiixp_set_dmamode,
.prereset = atiixp_pre_reset,
};
static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.sht = &atiixp_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x06, /* No MWDMA0 support */
@ -282,7 +243,7 @@ static int atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
.port_ops = &atiixp_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
return ata_pci_init_one(dev, ppi);
return ata_pci_sff_init_one(dev, ppi, &atiixp_sht, NULL);
}
static const struct pci_device_id atiixp[] = {

135
drivers/ata/pata_bf54x.c
Просмотреть файл

@ -674,7 +674,7 @@ static void read_atapi_data(void __iomem *base,
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
*
* Note: Original code is ata_tf_load().
* Note: Original code is ata_sff_tf_load().
*/
static void bfin_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
@ -745,7 +745,7 @@ static u8 bfin_check_status(struct ata_port *ap)
* @ap: Port from which input is read
* @tf: ATA taskfile register set for storing input
*
* Note: Original code is ata_tf_read().
* Note: Original code is ata_sff_tf_read().
*/
static void bfin_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
@ -775,7 +775,7 @@ static void bfin_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
*
* Note: Original code is ata_exec_command().
* Note: Original code is ata_sff_exec_command().
*/
static void bfin_exec_command(struct ata_port *ap,
@ -785,7 +785,7 @@ static void bfin_exec_command(struct ata_port *ap,
dev_dbg(ap->dev, "ata%u: cmd 0x%X\n", ap->print_id, tf->command);
write_atapi_register(base, ATA_REG_CMD, tf->command);
ata_pause(ap);
ata_sff_pause(ap);
}
/**
@ -800,14 +800,14 @@ static u8 bfin_check_altstatus(struct ata_port *ap)
}
/**
* bfin_std_dev_select - Select device 0/1 on ATA bus
* bfin_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
* @device: ATA device (numbered from zero) to select
*
* Note: Original code is ata_std_dev_select().
* Note: Original code is ata_sff_dev_select().
*/
static void bfin_std_dev_select(struct ata_port *ap, unsigned int device)
static void bfin_dev_select(struct ata_port *ap, unsigned int device)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
u8 tmp;
@ -818,7 +818,7 @@ static void bfin_std_dev_select(struct ata_port *ap, unsigned int device)
tmp = ATA_DEVICE_OBS | ATA_DEV1;
write_atapi_register(base, ATA_REG_DEVICE, tmp);
ata_pause(ap);
ata_sff_pause(ap);
}
/**
@ -977,7 +977,7 @@ static unsigned int bfin_devchk(struct ata_port *ap,
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
u8 nsect, lbal;
bfin_std_dev_select(ap, device);
bfin_dev_select(ap, device);
write_atapi_register(base, ATA_REG_NSECT, 0x55);
write_atapi_register(base, ATA_REG_LBAL, 0xaa);
@ -1014,7 +1014,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask)
* BSY bit to clear
*/
if (dev0)
ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
/* if device 1 was found in ata_devchk, wait for
* register access, then wait for BSY to clear
@ -1023,7 +1023,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask)
while (dev1) {
u8 nsect, lbal;
bfin_std_dev_select(ap, 1);
bfin_dev_select(ap, 1);
nsect = read_atapi_register(base, ATA_REG_NSECT);
lbal = read_atapi_register(base, ATA_REG_LBAL);
if ((nsect == 1) && (lbal == 1))
@ -1035,14 +1035,14 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask)
msleep(50); /* give drive a breather */
}
if (dev1)
ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
ata_sff_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
/* is all this really necessary? */
bfin_std_dev_select(ap, 0);
bfin_dev_select(ap, 0);
if (dev1)
bfin_std_dev_select(ap, 1);
bfin_dev_select(ap, 1);
if (dev0)
bfin_std_dev_select(ap, 0);
bfin_dev_select(ap, 0);
}
/**
@ -1088,14 +1088,14 @@ static unsigned int bfin_bus_softreset(struct ata_port *ap,
}
/**
* bfin_std_softreset - reset host port via ATA SRST
* bfin_softreset - reset host port via ATA SRST
* @ap: port to reset
* @classes: resulting classes of attached devices
*
* Note: Original code is ata_std_softreset().
* Note: Original code is ata_sff_softreset().
*/
static int bfin_std_softreset(struct ata_link *link, unsigned int *classes,
static int bfin_softreset(struct ata_link *link, unsigned int *classes,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
@ -1103,11 +1103,6 @@ static int bfin_std_softreset(struct ata_link *link, unsigned int *classes,
unsigned int devmask = 0, err_mask;
u8 err;
if (ata_link_offline(link)) {
classes[0] = ATA_DEV_NONE;
goto out;
}
/* determine if device 0/1 are present */
if (bfin_devchk(ap, 0))
devmask |= (1 << 0);
@ -1115,7 +1110,7 @@ static int bfin_std_softreset(struct ata_link *link, unsigned int *classes,
devmask |= (1 << 1);
/* select device 0 again */
bfin_std_dev_select(ap, 0);
bfin_dev_select(ap, 0);
/* issue bus reset */
err_mask = bfin_bus_softreset(ap, devmask);
@ -1126,13 +1121,12 @@ static int bfin_std_softreset(struct ata_link *link, unsigned int *classes,
}
/* determine by signature whether we have ATA or ATAPI devices */
classes[0] = ata_dev_try_classify(&ap->link.device[0],
classes[0] = ata_sff_dev_classify(&ap->link.device[0],
devmask & (1 << 0), &err);
if (slave_possible && err != 0x81)
classes[1] = ata_dev_try_classify(&ap->link.device[1],
classes[1] = ata_sff_dev_classify(&ap->link.device[1],
devmask & (1 << 1), &err);
out:
return 0;
}
@ -1167,7 +1161,7 @@ static unsigned char bfin_bmdma_status(struct ata_port *ap)
* @buflen: buffer length
* @write_data: read/write
*
* Note: Original code is ata_data_xfer().
* Note: Original code is ata_sff_data_xfer().
*/
static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf,
@ -1206,7 +1200,7 @@ static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf,
* bfin_irq_clear - Clear ATAPI interrupt.
* @ap: Port associated with this ATA transaction.
*
* Note: Original code is ata_bmdma_irq_clear().
* Note: Original code is ata_sff_irq_clear().
*/
static void bfin_irq_clear(struct ata_port *ap)
@ -1223,7 +1217,7 @@ static void bfin_irq_clear(struct ata_port *ap)
* bfin_irq_on - Enable interrupts on a port.
* @ap: Port on which interrupts are enabled.
*
* Note: Original code is ata_irq_on().
* Note: Original code is ata_sff_irq_on().
*/
static unsigned char bfin_irq_on(struct ata_port *ap)
@ -1244,13 +1238,13 @@ static unsigned char bfin_irq_on(struct ata_port *ap)
}
/**
* bfin_bmdma_freeze - Freeze DMA controller port
* bfin_freeze - Freeze DMA controller port
* @ap: port to freeze
*
* Note: Original code is ata_bmdma_freeze().
* Note: Original code is ata_sff_freeze().
*/
static void bfin_bmdma_freeze(struct ata_port *ap)
static void bfin_freeze(struct ata_port *ap)
{
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
@ -1264,19 +1258,19 @@ static void bfin_bmdma_freeze(struct ata_port *ap)
* ATA_NIEN manipulation. Also, many controllers fail to mask
* previously pending IRQ on ATA_NIEN assertion. Clear it.
*/
ata_chk_status(ap);
ap->ops->sff_check_status(ap);
bfin_irq_clear(ap);
}
/**
* bfin_bmdma_thaw - Thaw DMA controller port
* bfin_thaw - Thaw DMA controller port
* @ap: port to thaw
*
* Note: Original code is ata_bmdma_thaw().
* Note: Original code is ata_sff_thaw().
*/
void bfin_bmdma_thaw(struct ata_port *ap)
void bfin_thaw(struct ata_port *ap)
{
bfin_check_status(ap);
bfin_irq_clear(ap);
@ -1284,14 +1278,14 @@ void bfin_bmdma_thaw(struct ata_port *ap)
}
/**
* bfin_std_postreset - standard postreset callback
* bfin_postreset - standard postreset callback
* @ap: the target ata_port
* @classes: classes of attached devices
*
* Note: Original code is ata_std_postreset().
* Note: Original code is ata_sff_postreset().
*/
static void bfin_std_postreset(struct ata_link *link, unsigned int *classes)
static void bfin_postreset(struct ata_link *link, unsigned int *classes)
{
struct ata_port *ap = link->ap;
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
@ -1301,9 +1295,9 @@ static void bfin_std_postreset(struct ata_link *link, unsigned int *classes)
/* is double-select really necessary? */
if (classes[0] != ATA_DEV_NONE)
bfin_std_dev_select(ap, 1);
bfin_dev_select(ap, 1);
if (classes[1] != ATA_DEV_NONE)
bfin_std_dev_select(ap, 0);
bfin_dev_select(ap, 0);
/* bail out if no device is present */
if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
@ -1314,17 +1308,6 @@ static void bfin_std_postreset(struct ata_link *link, unsigned int *classes)
write_atapi_register(base, ATA_REG_CTRL, ap->ctl);
}
/**
* bfin_error_handler - Stock error handler for DMA controller
* @ap: port to handle error for
*/
static void bfin_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, ata_std_prereset, bfin_std_softreset, NULL,
bfin_std_postreset);
}
static void bfin_port_stop(struct ata_port *ap)
{
dev_dbg(ap->dev, "in atapi port stop\n");
@ -1357,51 +1340,40 @@ static int bfin_port_start(struct ata_port *ap)
}
static struct scsi_host_template bfin_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = SG_NONE,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
static const struct ata_port_operations bfin_pata_ops = {
.inherits = &ata_sff_port_ops,
.set_piomode = bfin_set_piomode,
.set_dmamode = bfin_set_dmamode,
.tf_load = bfin_tf_load,
.tf_read = bfin_tf_read,
.exec_command = bfin_exec_command,
.check_status = bfin_check_status,
.check_altstatus = bfin_check_altstatus,
.dev_select = bfin_std_dev_select,
.sff_tf_load = bfin_tf_load,
.sff_tf_read = bfin_tf_read,
.sff_exec_command = bfin_exec_command,
.sff_check_status = bfin_check_status,
.sff_check_altstatus = bfin_check_altstatus,
.sff_dev_select = bfin_dev_select,
.bmdma_setup = bfin_bmdma_setup,
.bmdma_start = bfin_bmdma_start,
.bmdma_stop = bfin_bmdma_stop,
.bmdma_status = bfin_bmdma_status,
.data_xfer = bfin_data_xfer,
.sff_data_xfer = bfin_data_xfer,
.qc_prep = ata_noop_qc_prep,
.qc_issue = ata_qc_issue_prot,
.freeze = bfin_bmdma_freeze,
.thaw = bfin_bmdma_thaw,
.error_handler = bfin_error_handler,
.freeze = bfin_freeze,
.thaw = bfin_thaw,
.softreset = bfin_softreset,
.postreset = bfin_postreset,
.post_internal_cmd = bfin_bmdma_stop,
.irq_handler = ata_interrupt,
.irq_clear = bfin_irq_clear,
.irq_on = bfin_irq_on,
.sff_irq_clear = bfin_irq_clear,
.sff_irq_on = bfin_irq_on,
.port_start = bfin_port_start,
.port_stop = bfin_port_stop,
@ -1409,7 +1381,6 @@ static const struct ata_port_operations bfin_pata_ops = {
static struct ata_port_info bfin_port_info[] = {
{
.sht = &bfin_sht,
.flags = ATA_FLAG_SLAVE_POSS
| ATA_FLAG_MMIO
| ATA_FLAG_NO_LEGACY,
@ -1536,7 +1507,7 @@ static int __devinit bfin_atapi_probe(struct platform_device *pdev)
}
if (ata_host_activate(host, platform_get_irq(pdev, 0),
ata_interrupt, IRQF_SHARED, &bfin_sht) != 0) {
ata_sff_interrupt, IRQF_SHARED, &bfin_sht) != 0) {
peripheral_free_list(atapi_io_port);
dev_err(&pdev->dev, "Fail to attach ATAPI device\n");
return -ENODEV;

83
drivers/ata/pata_cmd640.c
Просмотреть файл

@ -107,8 +107,8 @@ static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev)
pci_write_config_byte(pdev, arttim + 1, (t.active << 4) | t.recover);
} else {
/* Save the shared timings for channel, they will be loaded
by qc_issue_prot. Reloading the setup time is expensive
so we keep a merged one loaded */
by qc_issue. Reloading the setup time is expensive so we
keep a merged one loaded */
pci_read_config_byte(pdev, ARTIM23, &reg);
reg &= 0x3F;
reg |= t.setup;
@ -119,14 +119,14 @@ static void cmd640_set_piomode(struct ata_port *ap, struct ata_device *adev)
/**
* cmd640_qc_issue_prot - command preparation hook
* cmd640_qc_issue - command preparation hook
* @qc: Command to be issued
*
* Channel 1 has shared timings. We must reprogram the
* clock each drive 2/3 switch we do.
*/
static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc)
static unsigned int cmd640_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@ -137,7 +137,7 @@ static unsigned int cmd640_qc_issue_prot(struct ata_queued_cmd *qc)
pci_write_config_byte(pdev, DRWTIM23, timing->reg58[adev->devno]);
timing->last = adev->devno;
}
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
/**
@ -166,53 +166,16 @@ static int cmd640_port_start(struct ata_port *ap)
}
static struct scsi_host_template cmd640_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations cmd640_port_ops = {
.set_piomode = cmd640_set_piomode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &ata_bmdma_port_ops,
/* In theory xfer_noirq is not needed once we kill the prefetcher */
.sff_data_xfer = ata_sff_data_xfer_noirq,
.qc_issue = cmd640_qc_issue,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = cmd640_qc_issue_prot,
/* In theory this is not needed once we kill the prefetcher */
.data_xfer = ata_data_xfer_noirq,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.set_piomode = cmd640_set_piomode,
.port_start = cmd640_port_start,
};
@ -248,26 +211,36 @@ static void cmd640_hardware_init(struct pci_dev *pdev)
static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.sht = &cmd640_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.port_ops = &cmd640_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
int rc;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
cmd640_hardware_init(pdev);
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL);
}
#ifdef CONFIG_PM
static int cmd640_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
cmd640_hardware_init(pdev);
#ifdef CONFIG_PM
return ata_pci_device_resume(pdev);
#else
ata_host_resume(host);
return 0;
#endif
}
#endif
static const struct pci_device_id cmd640[] = {
{ PCI_VDEVICE(CMD, 0x640), 0 },
@ -281,8 +254,8 @@ static struct pci_driver cmd640_pci_driver = {
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
#endif
.resume = cmd640_reinit_one,
#endif
};
static int __init cmd640_init(void)

139
drivers/ata/pata_cmd64x.c
Просмотреть файл

@ -266,120 +266,30 @@ static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc)
}
static struct scsi_host_template cmd64x_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations cmd64x_base_ops = {
.inherits = &ata_bmdma_port_ops,
.set_piomode = cmd64x_set_piomode,
.set_dmamode = cmd64x_set_dmamode,
};
static struct ata_port_operations cmd64x_port_ops = {
.set_piomode = cmd64x_set_piomode,
.set_dmamode = cmd64x_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &cmd64x_base_ops,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
};
static struct ata_port_operations cmd646r1_port_ops = {
.set_piomode = cmd64x_set_piomode,
.set_dmamode = cmd64x_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.inherits = &cmd64x_base_ops,
.bmdma_stop = cmd646r1_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
.cable_detect = ata_cable_40wire,
};
static struct ata_port_operations cmd648_port_ops = {
.set_piomode = cmd64x_set_piomode,
.set_dmamode = cmd64x_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = cmd648_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.inherits = &cmd64x_base_ops,
.bmdma_stop = cmd648_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
.cable_detect = cmd648_cable_detect,
};
static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
@ -388,21 +298,18 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
static const struct ata_port_info cmd_info[6] = {
{ /* CMD 643 - no UDMA */
.sht = &cmd64x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &cmd64x_port_ops
},
{ /* CMD 646 with broken UDMA */
.sht = &cmd64x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &cmd64x_port_ops
},
{ /* CMD 646 with working UDMA */
.sht = &cmd64x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -410,14 +317,12 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &cmd64x_port_ops
},
{ /* CMD 646 rev 1 */
.sht = &cmd64x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &cmd646r1_port_ops
},
{ /* CMD 648 */
.sht = &cmd64x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -425,7 +330,6 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &cmd648_port_ops
},
{ /* CMD 649 */
.sht = &cmd64x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -435,12 +339,17 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL };
u8 mrdmode;
int rc;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;
if (id->driver_data == 0) /* 643 */
ata_pci_clear_simplex(pdev);
ata_pci_bmdma_clear_simplex(pdev);
if (pdev->device == PCI_DEVICE_ID_CMD_646) {
/* Does UDMA work ? */
@ -464,13 +373,20 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
#endif
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL);
}
#ifdef CONFIG_PM
static int cmd64x_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
u8 mrdmode;
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
pci_read_config_byte(pdev, MRDMODE, &mrdmode);
mrdmode &= ~ 0x30; /* IRQ set up */
@ -479,7 +395,8 @@ static int cmd64x_reinit_one(struct pci_dev *pdev)
#ifdef CONFIG_PPC
pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
#endif
return ata_pci_device_resume(pdev);
ata_host_resume(host);
return 0;
}
#endif

64
drivers/ata/pata_cs5520.c
Просмотреть файл

@ -140,51 +140,16 @@ static void cs5520_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
static struct scsi_host_template cs5520_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
ATA_BMDMA_SHT(DRV_NAME),
.sg_tablesize = LIBATA_DUMB_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
static struct ata_port_operations cs5520_port_ops = {
.inherits = &ata_bmdma_port_ops,
.qc_prep = ata_sff_dumb_qc_prep,
.cable_detect = ata_cable_40wire,
.set_piomode = cs5520_set_piomode,
.set_dmamode = cs5520_set_dmamode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_dumb_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
@ -203,6 +168,10 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
struct ata_ioports *ioaddr;
int i, rc;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* IDE port enable bits */
pci_read_config_byte(pdev, 0x60, &pcicfg);
@ -258,7 +227,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
ioaddr->ctl_addr = iomap[1];
ioaddr->altstatus_addr = iomap[1];
ioaddr->bmdma_addr = iomap[4];
ata_std_ports(ioaddr);
ata_sff_std_ports(ioaddr);
ata_port_desc(host->ports[0],
"cmd 0x%x ctl 0x%x", cmd_port[0], ctl_port[0]);
@ -269,7 +238,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
ioaddr->ctl_addr = iomap[3];
ioaddr->altstatus_addr = iomap[3];
ioaddr->bmdma_addr = iomap[4] + 8;
ata_std_ports(ioaddr);
ata_sff_std_ports(ioaddr);
ata_port_desc(host->ports[1],
"cmd 0x%x ctl 0x%x", cmd_port[1], ctl_port[1]);
@ -289,7 +258,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
continue;
rc = devm_request_irq(&pdev->dev, irq[ap->port_no],
ata_interrupt, 0, DRV_NAME, host);
ata_sff_interrupt, 0, DRV_NAME, host);
if (rc)
return rc;
@ -310,11 +279,20 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
static int cs5520_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
u8 pcicfg;
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
pci_read_config_byte(pdev, 0x60, &pcicfg);
if ((pcicfg & 0x40) == 0)
pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
return ata_pci_device_resume(pdev);
ata_host_resume(host);
return 0;
}
/**

78
drivers/ata/pata_cs5530.c
Просмотреть файл

@ -133,7 +133,7 @@ static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
}
/**
* cs5530_qc_issue_prot - command issue
* cs5530_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@ -142,7 +142,7 @@ static void cs5530_set_dmamode(struct ata_port *ap, struct ata_device *adev)
* one MWDMA/UDMA bit.
*/
static unsigned int cs5530_qc_issue_prot(struct ata_queued_cmd *qc)
static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@ -157,59 +157,23 @@ static unsigned int cs5530_qc_issue_prot(struct ata_queued_cmd *qc)
cs5530_set_dmamode(ap, adev);
}
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
static struct scsi_host_template cs5530_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
ATA_BMDMA_SHT(DRV_NAME),
.sg_tablesize = LIBATA_DUMB_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
static struct ata_port_operations cs5530_port_ops = {
.inherits = &ata_bmdma_port_ops,
.qc_prep = ata_sff_dumb_qc_prep,
.qc_issue = cs5530_qc_issue,
.cable_detect = ata_cable_40wire,
.set_piomode = cs5530_set_piomode,
.set_dmamode = cs5530_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_dumb_qc_prep,
.qc_issue = cs5530_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static const struct dmi_system_id palmax_dmi_table[] = {
@ -334,7 +298,6 @@ fail_put:
static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.sht = &cs5530_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -343,12 +306,16 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
/* The docking connector doesn't do UDMA, and it seems not MWDMA */
static const struct ata_port_info info_palmax_secondary = {
.sht = &cs5530_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.port_ops = &cs5530_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
int rc;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* Chip initialisation */
if (cs5530_init_chip())
@ -358,16 +325,25 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
ppi[1] = &info_palmax_secondary;
/* Now kick off ATA set up */
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL);
}
#ifdef CONFIG_PM
static int cs5530_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
/* If we fail on resume we are doomed */
if (cs5530_init_chip())
BUG();
return ata_pci_device_resume(pdev);
return -EIO;
ata_host_resume(host);
return 0;
}
#endif /* CONFIG_PM */

50
drivers/ata/pata_cs5535.c
Просмотреть файл

@ -158,55 +158,14 @@ static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev)
}
static struct scsi_host_template cs5535_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations cs5535_port_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = cs5535_cable_detect,
.set_piomode = cs5535_set_piomode,
.set_dmamode = cs5535_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = cs5535_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
/**
@ -222,7 +181,6 @@ static struct ata_port_operations cs5535_port_ops = {
static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.sht = &cs5535_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -241,7 +199,7 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
rdmsr(ATAC_CH0D1_PIO, timings, dummy);
if (CS5535_BAD_PIO(timings))
wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
return ata_pci_init_one(dev, ppi);
return ata_pci_sff_init_one(dev, ppi, &cs5535_sht, NULL);
}
static const struct pci_device_id cs5535[] = {

50
drivers/ata/pata_cs5536.c
Просмотреть файл

@ -221,55 +221,14 @@ static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev)
}
static struct scsi_host_template cs5536_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations cs5536_port_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = cs5536_cable_detect,
.set_piomode = cs5536_set_piomode,
.set_dmamode = cs5536_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = cs5536_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
};
/**
@ -282,7 +241,6 @@ static struct ata_port_operations cs5536_port_ops = {
static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.sht = &cs5536_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -303,7 +261,7 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
return -ENODEV;
}
return ata_pci_init_one(dev, ppi);
return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL);
}
static const struct pci_device_id cs5536[] = {

50
drivers/ata/pata_cypress.c
Просмотреть файл

@ -110,61 +110,19 @@ static void cy82c693_set_dmamode(struct ata_port *ap, struct ata_device *adev)
}
static struct scsi_host_template cy82c693_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations cy82c693_port_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = ata_cable_40wire,
.set_piomode = cy82c693_set_piomode,
.set_dmamode = cy82c693_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.sht = &cy82c693_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -178,7 +136,7 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i
if (PCI_FUNC(pdev->devfn) != 1)
return -ENODEV;
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &cy82c693_sht, NULL);
}
static const struct pci_device_id cy82c693[] = {

66
drivers/ata/pata_efar.c
Просмотреть файл

@ -45,20 +45,7 @@ static int efar_pre_reset(struct ata_link *link, unsigned long deadline)
if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no]))
return -ENOENT;
return ata_std_prereset(link, deadline);
}
/**
* efar_probe_reset - Probe specified port on PATA host controller
* @ap: Port to probe
*
* LOCKING:
* None (inherited from caller).
*/
static void efar_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, efar_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
/**
@ -233,53 +220,15 @@ static void efar_set_dmamode (struct ata_port *ap, struct ata_device *adev)
}
static struct scsi_host_template efar_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations efar_ops = {
static struct ata_port_operations efar_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = efar_cable_detect,
.set_piomode = efar_set_piomode,
.set_dmamode = efar_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = efar_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = efar_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.prereset = efar_pre_reset,
};
@ -301,7 +250,6 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
static const struct ata_port_info info = {
.sht = &efar_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma1-2 */
@ -314,7 +262,7 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL);
}
static const struct pci_device_id efar_pci_tbl[] = {

77
drivers/ata/pata_hpt366.c
Просмотреть файл

@ -184,7 +184,7 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask)
if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
mask &= ~(0xF0 << ATA_SHIFT_UDMA);
}
return ata_pci_default_filter(adev, mask);
return ata_bmdma_mode_filter(adev, mask);
}
/**
@ -290,21 +290,7 @@ static void hpt366_set_dmamode(struct ata_port *ap, struct ata_device *adev)
}
static struct scsi_host_template hpt36x_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
/*
@ -312,37 +298,11 @@ static struct scsi_host_template hpt36x_sht = {
*/
static struct ata_port_operations hpt366_port_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = hpt36x_cable_detect,
.mode_filter = hpt366_filter,
.set_piomode = hpt366_set_piomode,
.set_dmamode = hpt366_set_dmamode,
.mode_filter = hpt366_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = hpt36x_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
/**
@ -390,18 +350,22 @@ static void hpt36x_init_chipset(struct pci_dev *dev)
static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info_hpt366 = {
.sht = &hpt36x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA4,
.port_ops = &hpt366_port_ops
};
struct ata_port_info info = info_hpt366;
const struct ata_port_info *ppi[] = { &info, NULL };
const struct ata_port_info *ppi[] = { &info_hpt366, NULL };
void *hpriv = NULL;
u32 class_rev;
u32 reg1;
int rc;
rc = pcim_enable_device(dev);
if (rc)
return rc;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;
@ -419,24 +383,31 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
/* info_hpt366 is safe against re-entry so we can scribble on it */
switch((reg1 & 0x700) >> 8) {
case 5:
info.private_data = &hpt366_40;
hpriv = &hpt366_40;
break;
case 9:
info.private_data = &hpt366_25;
hpriv = &hpt366_25;
break;
default:
info.private_data = &hpt366_33;
hpriv = &hpt366_33;
break;
}
/* Now kick off ATA set up */
return ata_pci_init_one(dev, ppi);
return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv);
}
#ifdef CONFIG_PM
static int hpt36x_reinit_one(struct pci_dev *dev)
{
struct ata_host *host = dev_get_drvdata(&dev->dev);
int rc;
rc = ata_pci_device_do_resume(dev);
if (rc)
return rc;
hpt36x_init_chipset(dev);
return ata_pci_device_resume(dev);
ata_host_resume(host);
return 0;
}
#endif

247
drivers/ata/pata_hpt37x.c
Просмотреть файл

@ -283,7 +283,7 @@ static unsigned long hpt370_filter(struct ata_device *adev, unsigned long mask)
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
return ata_pci_default_filter(adev, mask);
return ata_bmdma_mode_filter(adev, mask);
}
/**
@ -299,7 +299,7 @@ static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask)
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
return ata_pci_default_filter(adev, mask);
return ata_bmdma_mode_filter(adev, mask);
}
/**
@ -338,22 +338,10 @@ static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline)
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(100);
return ata_std_prereset(link, deadline);
return ata_sff_prereset(link, deadline);
}
/**
* hpt37x_error_handler - reset the hpt374
* @ap: ATA port to reset
*
* Perform probe for HPT37x, except for HPT374 channel 2
*/
static void hpt37x_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, hpt37x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
}
static int hpt374_pre_reset(struct ata_link *link, unsigned long deadline)
static int hpt374_fn1_pre_reset(struct ata_link *link, unsigned long deadline)
{
static const struct pci_bits hpt37x_enable_bits[] = {
{ 0x50, 1, 0x04, 0x04 },
@ -386,26 +374,7 @@ static int hpt374_pre_reset(struct ata_link *link, unsigned long deadline)
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(100);
return ata_std_prereset(link, deadline);
}
/**
* hpt374_error_handler - reset the hpt374
* @classes:
*
* The 374 cable detect is a little different due to the extra
* channels. The function 0 channels work like usual but function 1
* is special
*/
static void hpt374_error_handler(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
if (!(PCI_FUNC(pdev->devfn) & 1))
hpt37x_error_handler(ap);
else
ata_bmdma_drive_eh(ap, hpt374_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
/**
@ -619,21 +588,7 @@ static void hpt37x_bmdma_stop(struct ata_queued_cmd *qc)
static struct scsi_host_template hpt37x_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
/*
@ -641,36 +596,15 @@ static struct scsi_host_template hpt37x_sht = {
*/
static struct ata_port_operations hpt370_port_ops = {
.set_piomode = hpt370_set_piomode,
.set_dmamode = hpt370_set_dmamode,
.mode_filter = hpt370_filter,
.inherits = &ata_bmdma_port_ops,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = hpt37x_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = hpt370_bmdma_start,
.bmdma_stop = hpt370_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.mode_filter = hpt370_filter,
.set_piomode = hpt370_set_piomode,
.set_dmamode = hpt370_set_dmamode,
.prereset = hpt37x_pre_reset,
};
/*
@ -678,36 +612,8 @@ static struct ata_port_operations hpt370_port_ops = {
*/
static struct ata_port_operations hpt370a_port_ops = {
.set_piomode = hpt370_set_piomode,
.set_dmamode = hpt370_set_dmamode,
.inherits = &hpt370_port_ops,
.mode_filter = hpt370a_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = hpt37x_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = hpt370_bmdma_start,
.bmdma_stop = hpt370_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
/*
@ -716,74 +622,23 @@ static struct ata_port_operations hpt370a_port_ops = {
*/
static struct ata_port_operations hpt372_port_ops = {
.inherits = &ata_bmdma_port_ops,
.bmdma_stop = hpt37x_bmdma_stop,
.set_piomode = hpt372_set_piomode,
.set_dmamode = hpt372_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = hpt37x_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = hpt37x_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.prereset = hpt37x_pre_reset,
};
/*
* Configuration for HPT374. Mode setting works like 372 and friends
* but we have a different cable detection procedure.
* but we have a different cable detection procedure for function 1.
*/
static struct ata_port_operations hpt374_port_ops = {
.set_piomode = hpt372_set_piomode,
.set_dmamode = hpt372_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = hpt374_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = hpt37x_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
static struct ata_port_operations hpt374_fn1_port_ops = {
.inherits = &hpt372_port_ops,
.prereset = hpt374_fn1_pre_reset,
};
/**
@ -897,7 +752,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
/* HPT370 - UDMA100 */
static const struct ata_port_info info_hpt370 = {
.sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -906,7 +760,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
};
/* HPT370A - UDMA100 */
static const struct ata_port_info info_hpt370a = {
.sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -915,7 +768,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
};
/* HPT370 - UDMA100 */
static const struct ata_port_info info_hpt370_33 = {
.sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -924,7 +776,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
};
/* HPT370A - UDMA100 */
static const struct ata_port_info info_hpt370a_33 = {
.sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -933,28 +784,31 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
};
/* HPT371, 372 and friends - UDMA133 */
static const struct ata_port_info info_hpt372 = {
.sht = &hpt37x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA6,
.port_ops = &hpt372_port_ops
};
/* HPT374 - UDMA100 */
static const struct ata_port_info info_hpt374 = {
.sht = &hpt37x_sht,
/* HPT374 - UDMA100, function 1 uses different prereset method */
static const struct ata_port_info info_hpt374_fn0 = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA5,
.port_ops = &hpt374_port_ops
.port_ops = &hpt372_port_ops
};
static const struct ata_port_info info_hpt374_fn1 = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA5,
.port_ops = &hpt374_fn1_port_ops
};
static const int MHz[4] = { 33, 40, 50, 66 };
const struct ata_port_info *port;
void *private_data = NULL;
struct ata_port_info port_info;
const struct ata_port_info *ppi[] = { &port_info, NULL };
const struct ata_port_info *ppi[] = { NULL, NULL };
u8 irqmask;
u32 class_rev;
@ -966,6 +820,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
const struct hpt_chip *chip_table;
int clock_slot;
int rc;
rc = pcim_enable_device(dev);
if (rc)
return rc;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;
@ -981,17 +840,17 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
switch(class_rev) {
case 3:
port = &info_hpt370;
ppi[0] = &info_hpt370;
chip_table = &hpt370;
prefer_dpll = 0;
break;
case 4:
port = &info_hpt370a;
ppi[0] = &info_hpt370a;
chip_table = &hpt370a;
prefer_dpll = 0;
break;
case 5:
port = &info_hpt372;
ppi[0] = &info_hpt372;
chip_table = &hpt372;
break;
default:
@ -1004,21 +863,21 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
/* 372N if rev >= 2*/
if (class_rev >= 2)
return -ENODEV;
port = &info_hpt372;
ppi[0] = &info_hpt372;
chip_table = &hpt372a;
break;
case PCI_DEVICE_ID_TTI_HPT302:
/* 302N if rev > 1 */
if (class_rev > 1)
return -ENODEV;
port = &info_hpt372;
ppi[0] = &info_hpt372;
/* Check this */
chip_table = &hpt302;
break;
case PCI_DEVICE_ID_TTI_HPT371:
if (class_rev > 1)
return -ENODEV;
port = &info_hpt372;
ppi[0] = &info_hpt372;
chip_table = &hpt371;
/* Single channel device, master is not present
but the BIOS (or us for non x86) must mark it
@ -1029,7 +888,10 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
break;
case PCI_DEVICE_ID_TTI_HPT374:
chip_table = &hpt374;
port = &info_hpt374;
if (!(PCI_FUNC(dev->devfn) & 1))
*ppi = &info_hpt374_fn0;
else
*ppi = &info_hpt374_fn1;
break;
default:
printk(KERN_ERR "pata_hpt37x: PCI table is bogus please report (%d).\n", dev->device);
@ -1108,7 +970,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
int dpll, adjust;
/* Compute DPLL */
dpll = (port->udma_mask & 0xC0) ? 3 : 2;
dpll = (ppi[0]->udma_mask & 0xC0) ? 3 : 2;
f_low = (MHz[clock_slot] * 48) / MHz[dpll];
f_high = f_low + 2;
@ -1148,19 +1010,16 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
* about lack of UDMA133 support on lower clocks
*/
if (clock_slot < 2 && port == &info_hpt370)
port = &info_hpt370_33;
if (clock_slot < 2 && port == &info_hpt370a)
port = &info_hpt370a_33;
if (clock_slot < 2 && ppi[0] == &info_hpt370)
ppi[0] = &info_hpt370_33;
if (clock_slot < 2 && ppi[0] == &info_hpt370a)
ppi[0] = &info_hpt370a_33;
printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n",
chip_table->name, MHz[clock_slot]);
}
/* Now kick off ATA set up */
port_info = *port;
port_info.private_data = private_data;
return ata_pci_init_one(dev, ppi);
return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data);
}
static const struct pci_device_id hpt37x[] = {

87
drivers/ata/pata_hpt3x2n.c
Просмотреть файл

@ -148,7 +148,7 @@ static int hpt3x2n_cable_detect(struct ata_port *ap)
* Reset the hardware and state machine,
*/
static int hpt3xn_pre_reset(struct ata_link *link, unsigned long deadline)
static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@ -156,19 +156,7 @@ static int hpt3xn_pre_reset(struct ata_link *link, unsigned long deadline)
pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
udelay(100);
return ata_std_prereset(link, deadline);
}
/**
* hpt3x2n_error_handler - probe the hpt3x2n bus
* @ap: ATA port to reset
*
* Perform the probe reset handling for the 3x2N
*/
static void hpt3x2n_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, hpt3xn_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
/**
@ -320,7 +308,7 @@ static int hpt3x2n_use_dpll(struct ata_port *ap, int writing)
return 0;
}
static unsigned int hpt3x2n_qc_issue_prot(struct ata_queued_cmd *qc)
static unsigned int hpt3x2n_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_taskfile *tf = &qc->tf;
struct ata_port *ap = qc->ap;
@ -335,25 +323,11 @@ static unsigned int hpt3x2n_qc_issue_prot(struct ata_queued_cmd *qc)
hpt3x2n_set_clock(ap, 0x23);
}
}
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
static struct scsi_host_template hpt3x2n_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
/*
@ -361,37 +335,15 @@ static struct scsi_host_template hpt3x2n_sht = {
*/
static struct ata_port_operations hpt3x2n_port_ops = {
.inherits = &ata_bmdma_port_ops,
.bmdma_stop = hpt3x2n_bmdma_stop,
.qc_issue = hpt3x2n_qc_issue,
.cable_detect = hpt3x2n_cable_detect,
.set_piomode = hpt3x2n_set_piomode,
.set_dmamode = hpt3x2n_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = hpt3x2n_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = hpt3x2n_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = hpt3x2n_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = hpt3x2n_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.prereset = hpt3x2n_pre_reset,
};
/**
@ -488,15 +440,13 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
/* HPT372N and friends - UDMA133 */
static const struct ata_port_info info = {
.sht = &hpt3x2n_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA6,
.port_ops = &hpt3x2n_port_ops
};
struct ata_port_info port = info;
const struct ata_port_info *ppi[] = { &port, NULL };
const struct ata_port_info *ppi[] = { &info, NULL };
u8 irqmask;
u32 class_rev;
@ -505,6 +455,12 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
unsigned int f_low, f_high;
int adjust;
unsigned long iobase = pci_resource_start(dev, 4);
void *hpriv = NULL;
int rc;
rc = pcim_enable_device(dev);
if (rc)
return rc;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;
@ -586,9 +542,8 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
pci_mhz);
/* Set our private data up. We only need a few flags so we use
it directly */
port.private_data = NULL;
if (pci_mhz > 60) {
port.private_data = (void *)PCI66;
hpriv = (void *)PCI66;
/*
* On HPT371N, if ATA clock is 66 MHz we must set bit 2 in
* the MISC. register to stretch the UltraDMA Tss timing.
@ -599,7 +554,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
}
/* Now kick off ATA set up */
return ata_pci_init_one(dev, ppi);
return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv);
}
static const struct pci_device_id hpt3x2n[] = {

56
drivers/ata/pata_hpt3x3.c
Просмотреть файл

@ -102,58 +102,17 @@ static int hpt3x3_atapi_dma(struct ata_queued_cmd *qc)
}
static struct scsi_host_template hpt3x3_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations hpt3x3_port_ops = {
.inherits = &ata_bmdma_port_ops,
.check_atapi_dma= hpt3x3_atapi_dma,
.cable_detect = ata_cable_40wire,
.set_piomode = hpt3x3_set_piomode,
#if defined(CONFIG_PATA_HPT3X3_DMA)
.set_dmamode = hpt3x3_set_dmamode,
#endif
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.check_atapi_dma= hpt3x3_atapi_dma,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
/**
@ -189,7 +148,6 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static int printed_version;
static const struct ata_port_info info = {
.sht = &hpt3x3_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
#if defined(CONFIG_PATA_HPT3X3_DMA)
@ -244,15 +202,15 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
ioaddr->altstatus_addr =
ioaddr->ctl_addr = base + offset_ctl[i];
ioaddr->scr_addr = NULL;
ata_std_ports(ioaddr);
ata_sff_std_ports(ioaddr);
ioaddr->bmdma_addr = base + 8 * i;
ata_port_pbar_desc(ap, 4, -1, "ioport");
ata_port_pbar_desc(ap, 4, offset_cmd[i], "cmd");
}
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
&hpt3x3_sht);
return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
IRQF_SHARED, &hpt3x3_sht);
}
#ifdef CONFIG_PM

67
drivers/ata/pata_icside.c
Просмотреть файл

@ -250,7 +250,7 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc)
set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ);
/* issue r/w command */
ap->ops->exec_command(ap, &qc->tf);
ap->ops->sff_exec_command(ap, &qc->tf);
}
static void pata_icside_bmdma_start(struct ata_queued_cmd *qc)
@ -270,7 +270,7 @@ static void pata_icside_bmdma_stop(struct ata_queued_cmd *qc)
disable_dma(state->dma);
/* see ata_bmdma_stop */
ata_altstatus(ap);
ata_sff_altstatus(ap);
}
static u8 pata_icside_bmdma_status(struct ata_port *ap)
@ -305,35 +305,18 @@ static int icside_dma_init(struct pata_icside_info *info)
static struct scsi_host_template pata_icside_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = PATA_ICSIDE_MAX_SG,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ~0, /* no dma boundaries */
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
/* wish this was exported from libata-core */
static void ata_dummy_noret(struct ata_port *port)
{
}
static void pata_icside_postreset(struct ata_link *link, unsigned int *classes)
{
struct ata_port *ap = link->ap;
struct pata_icside_state *state = ap->host->private_data;
if (classes[0] != ATA_DEV_NONE || classes[1] != ATA_DEV_NONE)
return ata_std_postreset(link, classes);
return ata_sff_postreset(link, classes);
state->port[ap->port_no].disabled = 1;
@ -349,42 +332,20 @@ static void pata_icside_postreset(struct ata_link *link, unsigned int *classes)
}
}
static void pata_icside_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL,
pata_icside_postreset);
}
static struct ata_port_operations pata_icside_port_ops = {
.set_dmamode = pata_icside_set_dmamode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.exec_command = ata_exec_command,
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
.cable_detect = ata_cable_40wire,
.bmdma_setup = pata_icside_bmdma_setup,
.bmdma_start = pata_icside_bmdma_start,
.data_xfer = ata_data_xfer_noirq,
.inherits = &ata_sff_port_ops,
/* no need to build any PRD tables for DMA */
.qc_prep = ata_noop_qc_prep,
.qc_issue = ata_qc_issue_prot,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = pata_icside_error_handler,
.post_internal_cmd = pata_icside_bmdma_stop,
.irq_clear = ata_dummy_noret,
.irq_on = ata_irq_on,
.sff_data_xfer = ata_sff_data_xfer_noirq,
.bmdma_setup = pata_icside_bmdma_setup,
.bmdma_start = pata_icside_bmdma_start,
.bmdma_stop = pata_icside_bmdma_stop,
.bmdma_status = pata_icside_bmdma_status,
.cable_detect = ata_cable_40wire,
.set_dmamode = pata_icside_set_dmamode,
.postreset = pata_icside_postreset,
.post_internal_cmd = pata_icside_bmdma_stop,
};
static void __devinit
@ -520,7 +481,7 @@ static int __devinit pata_icside_add_ports(struct pata_icside_info *info)
pata_icside_setup_ioaddr(ap, info->base, info, info->port[i]);
}
return ata_host_activate(host, ec->irq, ata_interrupt, 0,
return ata_host_activate(host, ec->irq, ata_sff_interrupt, 0,
&pata_icside_sht);
}

41
drivers/ata/pata_isapnp.c
Просмотреть файл

@ -20,45 +20,12 @@
#define DRV_VERSION "0.2.2"
static struct scsi_host_template isapnp_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations isapnp_port_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &ata_sff_port_ops,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
/**
@ -83,7 +50,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
if (pnp_irq_valid(idev, 0)) {
irq = pnp_irq(idev, 0);
handler = ata_interrupt;
handler = ata_sff_interrupt;
}
/* allocate host */
@ -111,7 +78,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
ap->ioaddr.ctl_addr = ctl_addr;
}
ata_std_ports(&ap->ioaddr);
ata_sff_std_ports(&ap->ioaddr);
ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx",
(unsigned long long)pnp_port_start(idev, 0),

67
drivers/ata/pata_it8213.c
Просмотреть файл

@ -40,20 +40,7 @@ static int it8213_pre_reset(struct ata_link *link, unsigned long deadline)
if (!pci_test_config_bits(pdev, &it8213_enable_bits[ap->port_no]))
return -ENOENT;
return ata_std_prereset(link, deadline);
}
/**
* it8213_error_handler - Probe specified port on PATA host controller
* @ap: Port to probe
*
* LOCKING:
* None (inherited from caller).
*/
static void it8213_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, it8213_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
/**
@ -243,53 +230,16 @@ static void it8213_set_dmamode (struct ata_port *ap, struct ata_device *adev)
}
static struct scsi_host_template it8213_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations it8213_ops = {
static struct ata_port_operations it8213_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = it8213_cable_detect,
.set_piomode = it8213_set_piomode,
.set_dmamode = it8213_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = it8213_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = it8213_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.prereset = it8213_pre_reset,
};
@ -311,7 +261,6 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en
{
static int printed_version;
static const struct ata_port_info info = {
.sht = &it8213_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@ -325,7 +274,7 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL);
}
static const struct pci_device_id it8213_pci_tbl[] = {

109
drivers/ata/pata_it821x.c
Просмотреть файл

@ -395,11 +395,11 @@ static void it821x_passthru_dev_select(struct ata_port *ap,
it821x_program(ap, adev, itdev->pio[adev->devno]);
itdev->last_device = device;
}
ata_std_dev_select(ap, device);
ata_sff_dev_select(ap, device);
}
/**
* it821x_smart_qc_issue_prot - wrap qc issue prot
* it821x_smart_qc_issue - wrap qc issue prot
* @qc: command
*
* Wrap the command issue sequence for the IT821x. We need to
@ -407,7 +407,7 @@ static void it821x_passthru_dev_select(struct ata_port *ap,
* usual happenings kick off
*/
static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc)
static unsigned int it821x_smart_qc_issue(struct ata_queued_cmd *qc)
{
switch(qc->tf.command)
{
@ -427,14 +427,14 @@ static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc)
case ATA_CMD_ID_ATA:
/* Arguably should just no-op this one */
case ATA_CMD_SET_FEATURES:
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
printk(KERN_DEBUG "it821x: can't process command 0x%02X\n", qc->tf.command);
return AC_ERR_DEV;
}
/**
* it821x_passthru_qc_issue_prot - wrap qc issue prot
* it821x_passthru_qc_issue - wrap qc issue prot
* @qc: command
*
* Wrap the command issue sequence for the IT821x. We need to
@ -442,10 +442,10 @@ static unsigned int it821x_smart_qc_issue_prot(struct ata_queued_cmd *qc)
* usual happenings kick off
*/
static unsigned int it821x_passthru_qc_issue_prot(struct ata_queued_cmd *qc)
static unsigned int it821x_passthru_qc_issue(struct ata_queued_cmd *qc)
{
it821x_passthru_dev_select(qc->ap, qc->dev->devno);
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
/**
@ -632,89 +632,34 @@ static int it821x_port_start(struct ata_port *ap)
}
static struct scsi_host_template it821x_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations it821x_smart_port_ops = {
.set_mode = it821x_smart_set_mode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.mode_filter = ata_pci_default_filter,
.inherits = &ata_bmdma_port_ops,
.check_status = ata_check_status,
.check_atapi_dma= it821x_check_atapi_dma,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.dev_config = it821x_dev_config,
.qc_issue = it821x_smart_qc_issue,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = it821x_ident_hack,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = it821x_smart_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.set_mode = it821x_smart_set_mode,
.dev_config = it821x_dev_config,
.port_start = it821x_port_start,
};
static struct ata_port_operations it821x_passthru_port_ops = {
.set_piomode = it821x_passthru_set_piomode,
.set_dmamode = it821x_passthru_set_dmamode,
.mode_filter = ata_pci_default_filter,
.inherits = &ata_bmdma_port_ops,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.check_atapi_dma= it821x_check_atapi_dma,
.dev_select = it821x_passthru_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_unknown,
.bmdma_setup = ata_bmdma_setup,
.sff_dev_select = it821x_passthru_dev_select,
.bmdma_start = it821x_passthru_bmdma_start,
.bmdma_stop = it821x_passthru_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_issue = it821x_passthru_qc_issue,
.qc_prep = ata_qc_prep,
.qc_issue = it821x_passthru_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_clear = ata_bmdma_irq_clear,
.irq_handler = ata_interrupt,
.irq_on = ata_irq_on,
.cable_detect = ata_cable_unknown,
.set_piomode = it821x_passthru_set_piomode,
.set_dmamode = it821x_passthru_set_dmamode,
.port_start = it821x_port_start,
};
@ -742,14 +687,12 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
u8 conf;
static const struct ata_port_info info_smart = {
.sht = &it821x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &it821x_smart_port_ops
};
static const struct ata_port_info info_passthru = {
.sht = &it821x_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -759,6 +702,11 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
const struct ata_port_info *ppi[] = { NULL, NULL };
static char *mode[2] = { "pass through", "smart" };
int rc;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* Force the card into bypass mode if so requested */
if (it8212_noraid) {
@ -774,16 +722,23 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
else
ppi[0] = &info_smart;
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL);
}
#ifdef CONFIG_PM
static int it821x_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
/* Resume - turn raid back off if need be */
if (it8212_noraid)
it821x_disable_raid(pdev);
return ata_pci_device_resume(pdev);
ata_host_resume(host);
return rc;
}
#endif

46
drivers/ata/pata_ixp4xx_cf.c
Просмотреть файл

@ -88,48 +88,14 @@ static unsigned int ixp4xx_mmio_data_xfer(struct ata_device *dev,
}
static struct scsi_host_template ixp4xx_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations ixp4xx_port_ops = {
.set_mode = ixp4xx_set_mode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.exec_command = ata_exec_command,
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ixp4xx_mmio_data_xfer,
.inherits = &ata_sff_port_ops,
.sff_data_xfer = ixp4xx_mmio_data_xfer,
.cable_detect = ata_cable_40wire,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
.set_mode = ixp4xx_set_mode,
};
static void ixp4xx_setup_port(struct ata_port *ap,
@ -144,7 +110,7 @@ static void ixp4xx_setup_port(struct ata_port *ap,
ioaddr->altstatus_addr = data->cs1 + 0x06;
ioaddr->ctl_addr = data->cs1 + 0x06;
ata_std_ports(ioaddr);
ata_sff_std_ports(ioaddr);
#ifndef __ARMEB__
@ -220,7 +186,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
/* activate host */
return ata_host_activate(host, irq, ata_interrupt, 0, &ixp4xx_sht);
return ata_host_activate(host, irq, ata_sff_interrupt, 0, &ixp4xx_sht);
}
static __devexit int ixp4xx_pata_remove(struct platform_device *dev)

68
drivers/ata/pata_jmicron.c
Просмотреть файл

@ -102,73 +102,18 @@ static int jmicron_pre_reset(struct ata_link *link, unsigned long deadline)
ap->cbl = ATA_CBL_SATA;
break;
}
return ata_std_prereset(link, deadline);
}
/**
* jmicron_error_handler - Setup and error handler
* @ap: Port to handle
*
* LOCKING:
* None (inherited from caller).
*/
static void jmicron_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, jmicron_pre_reset, ata_std_softreset, NULL,
ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
/* No PIO or DMA methods needed for this device */
static struct scsi_host_template jmicron_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
/* Use standard CHS mapping rules */
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations jmicron_ops = {
/* Task file is PCI ATA format, use helpers */
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = jmicron_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
/* BMDMA handling is PCI ATA format, use helpers */
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
/* IRQ-related hooks */
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
/* Generic PATA PCI ATA helpers */
.port_start = ata_port_start,
static struct ata_port_operations jmicron_ops = {
.inherits = &ata_bmdma_port_ops,
.prereset = jmicron_pre_reset,
};
@ -189,7 +134,6 @@ static const struct ata_port_operations jmicron_ops = {
static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.sht = &jmicron_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
@ -200,7 +144,7 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
};
const struct ata_port_info *ppi[] = { &info, NULL };
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &jmicron_sht, NULL);
}
static const struct pci_device_id jmicron_pci_tbl[] = {

314
drivers/ata/pata_legacy.c
Просмотреть файл

@ -208,21 +208,12 @@ static int legacy_set_mode(struct ata_link *link, struct ata_device **unused)
}
static struct scsi_host_template legacy_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_PIO_SHT(DRV_NAME),
};
static const struct ata_port_operations legacy_base_port_ops = {
.inherits = &ata_sff_port_ops,
.cable_detect = ata_cable_40wire,
};
/*
@ -234,55 +225,14 @@ static struct scsi_host_template legacy_sht = {
*/
static struct ata_port_operations simple_port_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer_noirq,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.inherits = &legacy_base_port_ops,
.sff_data_xfer = ata_sff_data_xfer_noirq,
};
static struct ata_port_operations legacy_port_ops = {
.inherits = &legacy_base_port_ops,
.sff_data_xfer = ata_sff_data_xfer_noirq,
.set_mode = legacy_set_mode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.cable_detect = ata_cable_40wire,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer_noirq,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
/*
@ -367,36 +317,15 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
}
local_irq_restore(flags);
} else
buflen = ata_data_xfer_noirq(dev, buf, buflen, rw);
buflen = ata_sff_data_xfer_noirq(dev, buf, buflen, rw);
return buflen;
}
static struct ata_port_operations pdc20230_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = pdc20230_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = pdc_data_xfer_vlb,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.sff_data_xfer = pdc_data_xfer_vlb,
};
/*
@ -427,30 +356,8 @@ static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
static struct ata_port_operations ht6560a_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = ht6560a_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer, /* Check vlb/noirq */
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
/*
@ -492,30 +399,8 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
static struct ata_port_operations ht6560b_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = ht6560b_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
/*
@ -613,30 +498,8 @@ static void opti82c611a_set_piomode(struct ata_port *ap,
static struct ata_port_operations opti82c611a_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = opti82c611a_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
/*
@ -716,7 +579,7 @@ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
/**
* opt82c465mv_qc_issue_prot - command issue
* opt82c465mv_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@ -730,7 +593,7 @@ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev)
* FIXME: dual channel needs ->serialize support
*/
static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc)
static unsigned int opti82c46x_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@ -741,34 +604,13 @@ static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc)
&& ap->host->private_data != NULL)
opti82c46x_set_piomode(ap, adev);
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
static struct ata_port_operations opti82c46x_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = opti82c46x_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = opti82c46x_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.qc_issue = opti82c46x_qc_issue,
};
static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
@ -802,7 +644,7 @@ static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
* @irq: interrupt line
*
* In dual channel mode the 6580 has one clock per channel and we have
* to software clockswitch in qc_issue_prot.
* to software clockswitch in qc_issue.
*/
static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
@ -868,14 +710,14 @@ static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
/**
* qdi_qc_issue_prot - command issue
* qdi_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings.
*/
static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@ -888,7 +730,7 @@ static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
2 * ap->port_no);
}
}
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
@ -917,7 +759,7 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
}
return (buflen + 3) & ~3;
} else
return ata_data_xfer(adev, buf, buflen, rw);
return ata_sff_data_xfer(adev, buf, buflen, rw);
}
static int qdi_port(struct platform_device *dev,
@ -930,84 +772,22 @@ static int qdi_port(struct platform_device *dev,
}
static struct ata_port_operations qdi6500_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = qdi6500_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = qdi_qc_issue_prot,
.data_xfer = vlb32_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.qc_issue = qdi_qc_issue,
.sff_data_xfer = vlb32_data_xfer,
};
static struct ata_port_operations qdi6580_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = qdi6580_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = vlb32_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.sff_data_xfer = vlb32_data_xfer,
};
static struct ata_port_operations qdi6580dp_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = qdi6580dp_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = qdi_qc_issue_prot,
.data_xfer = vlb32_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.sff_data_xfer = vlb32_data_xfer,
};
static DEFINE_SPINLOCK(winbond_lock);
@ -1076,29 +856,9 @@ static int winbond_port(struct platform_device *dev,
}
static struct ata_port_operations winbond_port_ops = {
.inherits = &legacy_base_port_ops,
.set_piomode = winbond_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = vlb32_data_xfer,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.sff_data_xfer = vlb32_data_xfer,
};
static struct legacy_controller controllers[] = {
@ -1256,12 +1016,12 @@ static __init int legacy_init_one(struct legacy_probe *probe)
ap->ioaddr.cmd_addr = io_addr;
ap->ioaddr.altstatus_addr = ctrl_addr;
ap->ioaddr.ctl_addr = ctrl_addr;
ata_std_ports(&ap->ioaddr);
ata_sff_std_ports(&ap->ioaddr);
ap->host->private_data = ld;
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, io + 0x0206);
ret = ata_host_activate(host, probe->irq, ata_interrupt, 0,
ret = ata_host_activate(host, probe->irq, ata_sff_interrupt, 0,
&legacy_sht);
if (ret)
goto fail;

69
drivers/ata/pata_marvell.c
Просмотреть файл

@ -55,7 +55,7 @@ static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
(!(devices & 0x10))) /* PATA enable ? */
return -ENOENT;
return ata_std_prereset(link, deadline);
return ata_sff_prereset(link, deadline);
}
static int marvell_cable_detect(struct ata_port *ap)
@ -75,71 +75,16 @@ static int marvell_cable_detect(struct ata_port *ap)
return 0; /* Our BUG macro needs the right markup */
}
/**
* marvell_error_handler - Setup and error handler
* @ap: Port to handle
*
* LOCKING:
* None (inherited from caller).
*/
static void marvell_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, marvell_pre_reset, ata_std_softreset, NULL,
ata_std_postreset);
}
/* No PIO or DMA methods needed for this device */
static struct scsi_host_template marvell_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
/* Use standard CHS mapping rules */
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations marvell_ops = {
/* Task file is PCI ATA format, use helpers */
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = marvell_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
static struct ata_port_operations marvell_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = marvell_cable_detect,
/* BMDMA handling is PCI ATA format, use helpers */
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
/* Timeout handling */
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
/* Generic PATA PCI ATA helpers */
.port_start = ata_sff_port_start,
.prereset = marvell_pre_reset,
};
@ -160,7 +105,6 @@ static const struct ata_port_operations marvell_ops = {
static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.sht = &marvell_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
@ -170,7 +114,6 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
.port_ops = &marvell_ops,
};
static const struct ata_port_info info_sata = {
.sht = &marvell_sht,
/* Slave possible as its magically mapped not real */
.flags = ATA_FLAG_SLAVE_POSS,
@ -185,7 +128,7 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
if (pdev->device == 0x6101)
ppi[1] = &ata_dummy_port_info;
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL);
}
static const struct pci_device_id marvell_pci_tbl[] = {

48
drivers/ata/pata_mpc52xx.c
Просмотреть файл

@ -252,53 +252,19 @@ mpc52xx_ata_dev_select(struct ata_port *ap, unsigned int device)
if (device != priv->csel)
mpc52xx_ata_apply_timings(priv, device);
ata_std_dev_select(ap,device);
ata_sff_dev_select(ap,device);
}
static void
mpc52xx_ata_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, NULL,
ata_std_postreset);
}
static struct scsi_host_template mpc52xx_ata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations mpc52xx_ata_port_ops = {
.set_piomode = mpc52xx_ata_set_piomode,
.dev_select = mpc52xx_ata_dev_select,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = mpc52xx_ata_error_handler,
.inherits = &ata_sff_port_ops,
.sff_dev_select = mpc52xx_ata_dev_select,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
.set_piomode = mpc52xx_ata_set_piomode,
.post_internal_cmd = ATA_OP_NULL,
};
static int __devinit
@ -339,7 +305,7 @@ mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv,
ata_port_desc(ap, "ata_regs 0x%lx", raw_ata_regs);
/* activate host */
return ata_host_activate(host, priv->ata_irq, ata_interrupt, 0,
return ata_host_activate(host, priv->ata_irq, ata_sff_interrupt, 0,
&mpc52xx_ata_sht);
}

71
drivers/ata/pata_mpiix.c
Просмотреть файл

@ -55,21 +55,7 @@ static int mpiix_pre_reset(struct ata_link *link, unsigned long deadline)
if (!pci_test_config_bits(pdev, &mpiix_enable_bits))
return -ENOENT;
return ata_std_prereset(link, deadline);
}
/**
* mpiix_error_handler - probe reset
* @ap: ATA port
*
* Perform the ATA probe and bus reset sequence plus specific handling
* for this hardware. The MPIIX has the enable bits in a different place
* to PIIX4 and friends. As a pure PIO device it has no cable detect
*/
static void mpiix_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, mpiix_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
/**
@ -83,8 +69,8 @@ static void mpiix_error_handler(struct ata_port *ap)
*
* This would get very ugly because we can only program timing for one
* device at a time, the other gets PIO0. Fortunately libata calls
* our qc_issue_prot command before a command is issued so we can
* flip the timings back and forth to reduce the pain.
* our qc_issue command before a command is issued so we can flip the
* timings back and forth to reduce the pain.
*/
static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev)
@ -124,7 +110,7 @@ static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
/**
* mpiix_qc_issue_prot - command issue
* mpiix_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@ -134,7 +120,7 @@ static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev)
* be made PIO0.
*/
static unsigned int mpiix_qc_issue_prot(struct ata_queued_cmd *qc)
static unsigned int mpiix_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@ -147,50 +133,19 @@ static unsigned int mpiix_qc_issue_prot(struct ata_queued_cmd *qc)
if (adev->pio_mode && adev != ap->private_data)
mpiix_set_piomode(ap, adev);
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
static struct scsi_host_template mpiix_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations mpiix_port_ops = {
.set_piomode = mpiix_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = mpiix_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &ata_sff_port_ops,
.qc_issue = mpiix_qc_issue,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = mpiix_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.set_piomode = mpiix_set_piomode,
.prereset = mpiix_pre_reset,
};
static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
@ -252,10 +207,10 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
ap->ioaddr.altstatus_addr = ctl_addr;
/* Let libata fill in the port details */
ata_std_ports(&ap->ioaddr);
ata_sff_std_ports(&ap->ioaddr);
/* activate host */
return ata_host_activate(host, irq, ata_interrupt, IRQF_SHARED,
return ata_host_activate(host, irq, ata_sff_interrupt, IRQF_SHARED,
&mpiix_sht);
}

58
drivers/ata/pata_netcell.c
Просмотреть файл

@ -21,54 +21,12 @@
/* No PIO or DMA methods needed for this device */
static struct scsi_host_template netcell_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
/* Use standard CHS mapping rules */
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations netcell_ops = {
/* Task file is PCI ATA format, use helpers */
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
static struct ata_port_operations netcell_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = ata_cable_80wire,
/* BMDMA handling is PCI ATA format, use helpers */
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
/* IRQ-related hooks */
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
/* Generic PATA PCI ATA helpers */
.port_start = ata_sff_port_start,
};
@ -90,7 +48,6 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
{
static int printed_version;
static const struct ata_port_info info = {
.sht = &netcell_sht,
.flags = ATA_FLAG_SLAVE_POSS,
/* Actually we don't really care about these as the
firmware deals with it */
@ -100,16 +57,21 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
.port_ops = &netcell_ops,
};
const struct ata_port_info *port_info[] = { &info, NULL };
int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* Any chip specific setup/optimisation/messages here */
ata_pci_clear_simplex(pdev);
ata_pci_bmdma_clear_simplex(pdev);
/* And let the library code do the work */
return ata_pci_init_one(pdev, port_info);
return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL);
}
static const struct pci_device_id netcell_pci_tbl[] = {

54
drivers/ata/pata_ninja32.c
Просмотреть файл

@ -73,60 +73,20 @@ static void ninja32_dev_select(struct ata_port *ap, unsigned int device)
struct ata_device *adev = &ap->link.device[device];
if (ap->private_data != adev) {
iowrite8(0xd6, ap->ioaddr.bmdma_addr + 0x1f);
ata_std_dev_select(ap, device);
ata_sff_dev_select(ap, device);
ninja32_set_piomode(ap, adev);
}
}
static struct scsi_host_template ninja32_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations ninja32_port_ops = {
.set_piomode = ninja32_set_piomode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ninja32_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &ata_bmdma_port_ops,
.sff_dev_select = ninja32_dev_select,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.set_piomode = ninja32_set_piomode,
};
static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
@ -172,7 +132,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
ap->ioaddr.ctl_addr = base + 0x1E;
ap->ioaddr.altstatus_addr = base + 0x1E;
ap->ioaddr.bmdma_addr = base;
ata_std_ports(&ap->ioaddr);
ata_sff_std_ports(&ap->ioaddr);
iowrite8(0x05, base + 0x01); /* Enable interrupt lines */
iowrite8(0xBE, base + 0x02); /* Burst, ?? setup */
@ -182,7 +142,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
iowrite8(0xa4, base + 0x1c); /* Unknown */
iowrite8(0x83, base + 0x1d); /* BMDMA control: WAIT0 */
/* FIXME: Should we disable them at remove ? */
return ata_host_activate(host, dev->irq, ata_interrupt,
return ata_host_activate(host, dev->irq, ata_sff_interrupt,
IRQF_SHARED, &ninja32_sht);
}

68
drivers/ata/pata_ns87410.c
Просмотреть файл

@ -50,21 +50,7 @@ static int ns87410_pre_reset(struct ata_link *link, unsigned long deadline)
if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no]))
return -ENOENT;
return ata_std_prereset(link, deadline);
}
/**
* ns87410_error_handler - probe reset
* @ap: ATA port
*
* Perform the ATA probe and bus reset sequence plus specific handling
* for this hardware. The MPIIX has the enable bits in a different place
* to PIIX4 and friends. As a pure PIO device it has no cable detect
*/
static void ns87410_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, ns87410_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
/**
@ -119,7 +105,7 @@ static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
/**
* ns87410_qc_issue_prot - command issue
* ns87410_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@ -127,7 +113,7 @@ static void ns87410_set_piomode(struct ata_port *ap, struct ata_device *adev)
* necessary.
*/
static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc)
static unsigned int ns87410_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@ -140,64 +126,30 @@ static unsigned int ns87410_qc_issue_prot(struct ata_queued_cmd *qc)
if (adev->pio_mode && adev != ap->private_data)
ns87410_set_piomode(ap, adev);
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
static struct scsi_host_template ns87410_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations ns87410_port_ops = {
.set_piomode = ns87410_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ns87410_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &ata_sff_port_ops,
.qc_issue = ns87410_qc_issue,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ns87410_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.set_piomode = ns87410_set_piomode,
.prereset = ns87410_pre_reset,
};
static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.sht = &ns87410_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x0F,
.port_ops = &ns87410_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
return ata_pci_init_one(dev, ppi);
return ata_pci_sff_init_one(dev, ppi, &ns87410_sht, NULL);
}
static const struct pci_device_id ns87410[] = {

104
drivers/ata/pata_ns87415.c
Просмотреть файл

@ -138,7 +138,7 @@ static void ns87415_bmdma_setup(struct ata_queued_cmd *qc)
dmactl |= ATA_DMA_WR;
iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
/* issue r/w command */
ap->ops->exec_command(ap, &qc->tf);
ap->ops->sff_exec_command(ap, &qc->tf);
}
/**
@ -172,14 +172,14 @@ static void ns87415_bmdma_stop(struct ata_queued_cmd *qc)
}
/**
* ns87415_bmdma_irq_clear - Clear interrupt
* ns87415_irq_clear - Clear interrupt
* @ap: Channel to clear
*
* Erratum: Due to a chip bug regisers 02 and 0A bit 1 and 2 (the
* error bits) are reset by writing to register 00 or 08.
*/
static void ns87415_bmdma_irq_clear(struct ata_port *ap)
static void ns87415_irq_clear(struct ata_port *ap)
{
void __iomem *mmio = ap->ioaddr.bmdma_addr;
@ -297,90 +297,32 @@ static u8 ns87560_bmdma_status(struct ata_port *ap)
{
return ns87560_read_buggy(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
}
static const struct ata_port_operations ns87560_pata_ops = {
.set_piomode = ns87415_set_piomode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ns87560_tf_read,
.check_status = ns87560_check_status,
.check_atapi_dma = ns87415_check_atapi_dma,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ns87415_bmdma_setup,
.bmdma_start = ns87415_bmdma_start,
.bmdma_stop = ns87415_bmdma_stop,
.bmdma_status = ns87560_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ns87415_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
#endif /* 87560 SuperIO Support */
static struct ata_port_operations ns87415_pata_ops = {
.inherits = &ata_bmdma_port_ops,
static const struct ata_port_operations ns87415_pata_ops = {
.set_piomode = ns87415_set_piomode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.check_atapi_dma = ns87415_check_atapi_dma,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ns87415_bmdma_setup,
.bmdma_start = ns87415_bmdma_start,
.bmdma_stop = ns87415_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.sff_irq_clear = ns87415_irq_clear,
.irq_handler = ata_interrupt,
.irq_clear = ns87415_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.cable_detect = ata_cable_40wire,
.set_piomode = ns87415_set_piomode,
};
#if defined(CONFIG_SUPERIO)
static struct ata_port_operations ns87560_pata_ops = {
.inherits = &ns87415_pata_ops,
.sff_tf_read = ns87560_tf_read,
.sff_check_status = ns87560_check_status,
.bmdma_status = ns87560_bmdma_status,
};
#endif
static struct scsi_host_template ns87415_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
@ -403,16 +345,15 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
{
static int printed_version;
static const struct ata_port_info info = {
.sht = &ns87415_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.port_ops = &ns87415_pata_ops,
};
const struct ata_port_info *ppi[] = { &info, NULL };
int rc;
#if defined(CONFIG_SUPERIO)
static const struct ata_port_info info87560 = {
.sht = &ns87415_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
@ -425,11 +366,16 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* Select 512 byte sectors */
pci_write_config_byte(pdev, 0x55, 0xEE);
/* Select PIO0 8bit clocking */
pci_write_config_byte(pdev, 0x54, 0xB7);
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL);
}
static const struct pci_device_id ns87415_pci_tbl[] = {

74
drivers/ata/pata_oldpiix.c
Просмотреть файл

@ -47,21 +47,7 @@ static int oldpiix_pre_reset(struct ata_link *link, unsigned long deadline)
if (!pci_test_config_bits(pdev, &oldpiix_enable_bits[ap->port_no]))
return -ENOENT;
return ata_std_prereset(link, deadline);
}
/**
* oldpiix_pata_error_handler - Probe specified port on PATA host controller
* @ap: Port to probe
* @classes:
*
* LOCKING:
* None (inherited from caller).
*/
static void oldpiix_pata_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, oldpiix_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
/**
@ -195,7 +181,7 @@ static void oldpiix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
}
/**
* oldpiix_qc_issue_prot - command issue
* oldpiix_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@ -205,7 +191,7 @@ static void oldpiix_set_dmamode (struct ata_port *ap, struct ata_device *adev)
* be made PIO0.
*/
static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc)
static unsigned int oldpiix_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@ -215,58 +201,21 @@ static unsigned int oldpiix_qc_issue_prot(struct ata_queued_cmd *qc)
if (adev->dma_mode)
oldpiix_set_dmamode(ap, adev);
}
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
static struct scsi_host_template oldpiix_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations oldpiix_pata_ops = {
static struct ata_port_operations oldpiix_pata_ops = {
.inherits = &ata_bmdma_port_ops,
.qc_issue = oldpiix_qc_issue,
.cable_detect = ata_cable_40wire,
.set_piomode = oldpiix_set_piomode,
.set_dmamode = oldpiix_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = oldpiix_pata_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = oldpiix_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.prereset = oldpiix_pre_reset,
};
@ -289,7 +238,6 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e
{
static int printed_version;
static const struct ata_port_info info = {
.sht = &oldpiix_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma1-2 */
@ -301,7 +249,7 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &oldpiix_sht, NULL);
}
static const struct pci_device_id oldpiix_pci_tbl[] = {

66
drivers/ata/pata_opti.c
Просмотреть файл

@ -64,22 +64,7 @@ static int opti_pre_reset(struct ata_link *link, unsigned long deadline)
if (!pci_test_config_bits(pdev, &opti_enable_bits[ap->port_no]))
return -ENOENT;
return ata_std_prereset(link, deadline);
}
/**
* opti_probe_reset - probe reset
* @ap: ATA port
*
* Perform the ATA probe and bus reset sequence plus specific handling
* for this hardware. The Opti needs little handling - we have no UDMA66
* capability that needs cable detection. All we must do is check the port
* is enabled.
*/
static void opti_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, opti_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
/**
@ -165,58 +150,19 @@ static void opti_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
static struct scsi_host_template opti_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations opti_port_ops = {
.set_piomode = opti_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = opti_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &ata_sff_port_ops,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.set_piomode = opti_set_piomode,
.prereset = opti_pre_reset,
};
static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.sht = &opti_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.port_ops = &opti_port_ops
@ -227,7 +173,7 @@ static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
return ata_pci_init_one(dev, ppi);
return ata_pci_sff_init_one(dev, ppi, &opti_sht, NULL);
}
static const struct pci_device_id opti[] = {

103
drivers/ata/pata_optidma.c
Просмотреть файл

@ -64,22 +64,7 @@ static int optidma_pre_reset(struct ata_link *link, unsigned long deadline)
if (ap->port_no && !pci_test_config_bits(pdev, &optidma_enable_bits))
return -ENOENT;
return ata_std_prereset(link, deadline);
}
/**
* optidma_probe_reset - probe reset
* @ap: ATA port
*
* Perform the ATA probe and bus reset sequence plus specific handling
* for this hardware. The Opti needs little handling - we have no UDMA66
* capability that needs cable detection. All we must do is check the port
* is enabled.
*/
static void optidma_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, optidma_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
/**
@ -350,89 +335,22 @@ static int optidma_set_mode(struct ata_link *link, struct ata_device **r_failed)
}
static struct scsi_host_template optidma_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations optidma_port_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = ata_cable_40wire,
.set_piomode = optidma_set_pio_mode,
.set_dmamode = optidma_set_dma_mode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.error_handler = optidma_error_handler,
.set_mode = optidma_set_mode,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.prereset = optidma_pre_reset,
};
static struct ata_port_operations optiplus_port_ops = {
.inherits = &optidma_port_ops,
.set_piomode = optiplus_set_pio_mode,
.set_dmamode = optiplus_set_dma_mode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.error_handler = optidma_error_handler,
.set_mode = optidma_set_mode,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
/**
@ -481,14 +399,12 @@ done_nomsg: /* Wrong chip revision */
static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info_82c700 = {
.sht = &optidma_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &optidma_port_ops
};
static const struct ata_port_info info_82c700_udma = {
.sht = &optidma_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -497,10 +413,15 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
};
const struct ata_port_info *ppi[] = { &info_82c700, NULL };
static int printed_version;
int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
rc = pcim_enable_device(dev);
if (rc)
return rc;
/* Fixed location chipset magic */
inw(0x1F1);
inw(0x1F1);
@ -509,7 +430,7 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (optiplus_with_udma(dev))
ppi[0] = &info_82c700_udma;
return ata_pci_init_one(dev, ppi);
return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL);
}
static const struct pci_device_id optidma[] = {

68
drivers/ata/pata_pcmcia.c
Просмотреть файл

@ -128,71 +128,21 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
static struct scsi_host_template pcmcia_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations pcmcia_port_ops = {
.set_mode = pcmcia_set_mode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &ata_sff_port_ops,
.sff_data_xfer = ata_sff_data_xfer_noirq,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer_noirq,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.set_mode = pcmcia_set_mode,
};
static struct ata_port_operations pcmcia_8bit_port_ops = {
.set_mode = pcmcia_set_mode_8bit,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &ata_sff_port_ops,
.sff_data_xfer = ata_data_xfer_8bit,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer_8bit,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.set_mode = pcmcia_set_mode_8bit,
};
#define CS_CHECK(fn, ret) \
@ -373,13 +323,13 @@ next_entry:
ap->ioaddr.cmd_addr = io_addr + 0x10 * p;
ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p;
ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p;
ata_std_ports(&ap->ioaddr);
ata_sff_std_ports(&ap->ioaddr);
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base);
}
/* activate */
ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt,
ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_sff_interrupt,
IRQF_SHARED, &pcmcia_sht);
if (ret)
goto failed;

99
drivers/ata/pata_pdc2027x.c
Просмотреть файл

@ -63,7 +63,7 @@ enum {
};
static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static void pdc2027x_error_handler(struct ata_port *ap);
static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline);
static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc);
@ -129,84 +129,22 @@ static struct pci_driver pdc2027x_pci_driver = {
};
static struct scsi_host_template pdc2027x_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations pdc2027x_pata100_ops = {
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.inherits = &ata_bmdma_port_ops,
.check_atapi_dma = pdc2027x_check_atapi_dma,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = pdc2027x_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = pdc2027x_cable_detect,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.prereset = pdc2027x_prereset,
};
static struct ata_port_operations pdc2027x_pata133_ops = {
.inherits = &pdc2027x_pata100_ops,
.mode_filter = pdc2027x_mode_filter,
.set_piomode = pdc2027x_set_piomode,
.set_dmamode = pdc2027x_set_dmamode,
.set_mode = pdc2027x_set_mode,
.mode_filter = pdc2027x_mode_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.check_atapi_dma = pdc2027x_check_atapi_dma,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = pdc2027x_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = pdc2027x_cable_detect,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static struct ata_port_info pdc2027x_port_info[] = {
@ -310,22 +248,7 @@ static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline)
/* Check whether port enabled */
if (!pdc2027x_port_enabled(link->ap))
return -ENOENT;
return ata_std_prereset(link, deadline);
}
/**
* pdc2027x_error_handler - Perform reset on PATA port and classify
* @ap: Port to reset
*
* Reset PATA phy and classify attached devices.
*
* LOCKING:
* None (inherited from caller).
*/
static void pdc2027x_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, pdc2027x_prereset, ata_std_softreset, NULL, ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
/**
@ -342,7 +265,7 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long
struct ata_device *pair = ata_dev_pair(adev);
if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL)
return ata_pci_default_filter(adev, mask);
return ata_bmdma_mode_filter(adev, mask);
/* Check for slave of a Maxtor at UDMA6 */
ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
@ -351,7 +274,7 @@ static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long
if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6)
mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
return ata_pci_default_filter(adev, mask);
return ata_bmdma_mode_filter(adev, mask);
}
/**
@ -836,8 +759,8 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
return -EIO;
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
&pdc2027x_sht);
return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
IRQF_SHARED, &pdc2027x_sht);
}
/**

78
drivers/ata/pata_pdc202xx_old.c
Просмотреть файл

@ -262,85 +262,26 @@ static int pdc2026x_check_atapi_dma(struct ata_queued_cmd *qc)
}
static struct scsi_host_template pdc202xx_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations pdc2024x_port_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = ata_cable_40wire,
.set_piomode = pdc202xx_set_piomode,
.set_dmamode = pdc202xx_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static struct ata_port_operations pdc2026x_port_ops = {
.set_piomode = pdc202xx_set_piomode,
.set_dmamode = pdc202xx_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.dev_config = pdc2026x_dev_config,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = pdc2026x_cable_detect,
.inherits = &pdc2024x_port_ops,
.check_atapi_dma = pdc2026x_check_atapi_dma,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = pdc2026x_bmdma_start,
.bmdma_stop = pdc2026x_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.cable_detect = pdc2026x_cable_detect,
.dev_config = pdc2026x_dev_config,
.port_start = pdc2026x_port_start,
};
@ -349,7 +290,6 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
{
static const struct ata_port_info info[3] = {
{
.sht = &pdc202xx_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -357,7 +297,6 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
.port_ops = &pdc2024x_port_ops
},
{
.sht = &pdc202xx_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -365,7 +304,6 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
.port_ops = &pdc2026x_port_ops
},
{
.sht = &pdc202xx_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -386,7 +324,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
return -ENODEV;
}
}
return ata_pci_init_one(dev, ppi);
return ata_pci_sff_init_one(dev, ppi, &pdc202xx_sht, NULL);
}
static const struct pci_device_id pdc202xx[] = {

46
drivers/ata/pata_platform.c
Просмотреть файл

@ -46,50 +46,16 @@ static int pata_platform_set_mode(struct ata_link *link, struct ata_device **unu
return 0;
}
static int ata_dummy_ret0(struct ata_port *ap) { return 0; }
static struct scsi_host_template pata_platform_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations pata_platform_port_ops = {
.set_mode = pata_platform_set_mode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &ata_sff_port_ops,
.sff_data_xfer = ata_sff_data_xfer_noirq,
.cable_detect = ata_cable_unknown,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer_noirq,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_dummy_ret0,
.set_mode = pata_platform_set_mode,
.port_start = ATA_OP_NULL,
};
static void pata_platform_setup_port(struct ata_ioports *ioaddr,
@ -210,7 +176,7 @@ int __devinit __pata_platform_probe(struct device *dev,
(unsigned long long)ctl_res->start);
/* activate */
return ata_host_activate(host, irq, irq ? ata_interrupt : NULL,
return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL,
irq_flags, &pata_platform_sht);
}
EXPORT_SYMBOL_GPL(__pata_platform_probe);

77
drivers/ata/pata_qdi.c
Просмотреть файл

@ -102,14 +102,14 @@ static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
/**
* qdi_qc_issue_prot - command issue
* qdi_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings.
*/
static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@ -121,7 +121,7 @@ static unsigned int qdi_qc_issue_prot(struct ata_queued_cmd *qc)
outb(qdi->clock[adev->devno], qdi->timing);
}
}
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf,
@ -148,79 +148,26 @@ static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf,
buflen += 4 - slop;
}
} else
buflen = ata_data_xfer(dev, buf, buflen, rw);
buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
return buflen;
}
static struct scsi_host_template qdi_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations qdi6500_port_ops = {
.set_piomode = qdi6500_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &ata_sff_port_ops,
.qc_issue = qdi_qc_issue,
.sff_data_xfer = qdi_data_xfer,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = qdi_qc_issue_prot,
.data_xfer = qdi_data_xfer,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.set_piomode = qdi6500_set_piomode,
};
static struct ata_port_operations qdi6580_port_ops = {
.inherits = &qdi6500_port_ops,
.set_piomode = qdi6580_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = qdi_qc_issue_prot,
.data_xfer = qdi_data_xfer,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
/**
@ -276,7 +223,7 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i
ap->ioaddr.cmd_addr = io_addr;
ap->ioaddr.altstatus_addr = ctl_addr;
ap->ioaddr.ctl_addr = ctl_addr;
ata_std_ports(&ap->ioaddr);
ata_sff_std_ports(&ap->ioaddr);
ata_port_desc(ap, "cmd %lx ctl %lx", io, ctl);
@ -292,7 +239,7 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i
printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io);
/* activate */
ret = ata_host_activate(host, irq, ata_interrupt, 0, &qdi_sht);
ret = ata_host_activate(host, irq, ata_sff_interrupt, 0, &qdi_sht);
if (ret)
goto fail;

57
drivers/ata/pata_radisys.c
Просмотреть файл

@ -156,7 +156,7 @@ static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev)
}
/**
* radisys_qc_issue_prot - command issue
* radisys_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@ -166,7 +166,7 @@ static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev)
* be made PIO0.
*/
static unsigned int radisys_qc_issue_prot(struct ata_queued_cmd *qc)
static unsigned int radisys_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@ -180,58 +180,20 @@ static unsigned int radisys_qc_issue_prot(struct ata_queued_cmd *qc)
radisys_set_piomode(ap, adev);
}
}
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
static struct scsi_host_template radisys_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations radisys_pata_ops = {
static struct ata_port_operations radisys_pata_ops = {
.inherits = &ata_bmdma_port_ops,
.qc_issue = radisys_qc_issue,
.cable_detect = ata_cable_unknown,
.set_piomode = radisys_set_piomode,
.set_dmamode = radisys_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_unknown,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = radisys_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
@ -254,7 +216,6 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e
{
static int printed_version;
static const struct ata_port_info info = {
.sht = &radisys_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma1-2 */
@ -267,7 +228,7 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &radisys_sht, NULL);
}
static const struct pci_device_id radisys_pci_tbl[] = {

54
drivers/ata/pata_rb500_cf.c
Просмотреть файл

@ -57,7 +57,7 @@ static inline void rb500_pata_finish_io(struct ata_port *ap)
struct ata_host *ah = ap->host;
struct rb500_cf_info *info = ah->private_data;
ata_altstatus(ap);
ata_sff_altstatus(ap);
ndelay(RB500_CF_IO_DELAY);
set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
@ -109,7 +109,7 @@ static irqreturn_t rb500_pata_irq_handler(int irq, void *dev_instance)
if (gpio_get_value(info->gpio_line)) {
set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
if (!info->frozen)
ata_interrupt(info->irq, dev_instance);
ata_sff_interrupt(info->irq, dev_instance);
} else {
set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
}
@ -117,58 +117,18 @@ static irqreturn_t rb500_pata_irq_handler(int irq, void *dev_instance)
return IRQ_HANDLED;
}
static void rb500_pata_irq_clear(struct ata_port *ap)
{
}
static int rb500_pata_port_start(struct ata_port *ap)
{
return 0;
}
static struct ata_port_operations rb500_pata_port_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.exec_command = rb500_pata_exec_command,
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
.data_xfer = rb500_pata_data_xfer,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.inherits = &ata_sff_port_ops,
.sff_exec_command = rb500_pata_exec_command,
.sff_data_xfer = rb500_pata_data_xfer,
.freeze = rb500_pata_freeze,
.thaw = rb500_pata_thaw,
.error_handler = ata_bmdma_error_handler,
.irq_handler = rb500_pata_irq_handler,
.irq_clear = rb500_pata_irq_clear,
.irq_on = ata_irq_on,
.port_start = rb500_pata_port_start,
};
/* ------------------------------------------------------------------------ */
static struct scsi_host_template rb500_pata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
.proc_name = DRV_NAME,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.dma_boundary = ATA_DMA_BOUNDARY,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
ATA_PIO_SHT(DRV_NAME),
};
/* ------------------------------------------------------------------------ */
@ -188,7 +148,7 @@ static void rb500_pata_setup_ports(struct ata_host *ah)
ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL;
ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
ata_std_ports(&ap->ioaddr);
ata_sff_std_ports(&ap->ioaddr);
ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA;
}

49
drivers/ata/pata_rz1000.c
Просмотреть файл

@ -53,53 +53,13 @@ static int rz1000_set_mode(struct ata_link *link, struct ata_device **unused)
static struct scsi_host_template rz1000_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations rz1000_port_ops = {
.set_mode = rz1000_set_mode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &ata_sff_port_ops,
.cable_detect = ata_cable_40wire,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.set_mode = rz1000_set_mode,
};
static int rz1000_fifo_disable(struct pci_dev *pdev)
@ -129,7 +89,6 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en
{
static int printed_version;
static const struct ata_port_info info = {
.sht = &rz1000_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.port_ops = &rz1000_port_ops
@ -140,7 +99,7 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en
printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
if (rz1000_fifo_disable(pdev) == 0)
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL);
printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
/* Not safe to use so skip */

57
drivers/ata/pata_sc1200.c
Просмотреть файл

@ -151,7 +151,7 @@ static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev)
}
/**
* sc1200_qc_issue_prot - command issue
* sc1200_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
@ -160,7 +160,7 @@ static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev)
* one MWDMA/UDMA bit.
*/
static unsigned int sc1200_qc_issue_prot(struct ata_queued_cmd *qc)
static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
@ -175,59 +175,21 @@ static unsigned int sc1200_qc_issue_prot(struct ata_queued_cmd *qc)
sc1200_set_dmamode(ap, adev);
}
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
static struct scsi_host_template sc1200_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
ATA_BMDMA_SHT(DRV_NAME),
.sg_tablesize = LIBATA_DUMB_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
static struct ata_port_operations sc1200_port_ops = {
.inherits = &ata_bmdma_port_ops,
.qc_prep = ata_sff_dumb_qc_prep,
.qc_issue = sc1200_qc_issue,
.cable_detect = ata_cable_40wire,
.set_piomode = sc1200_set_piomode,
.set_dmamode = sc1200_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_dumb_qc_prep,
.qc_issue = sc1200_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
/**
@ -242,7 +204,6 @@ static struct ata_port_operations sc1200_port_ops = {
static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.sht = &sc1200_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -252,7 +213,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
/* Can't enable port 2 yet, see top comments */
const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
return ata_pci_init_one(dev, ppi);
return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL);
}
static const struct pci_device_id sc1200[] = {

235
drivers/ata/pata_scc.c
Просмотреть файл

@ -266,7 +266,7 @@ unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask)
printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
return ata_pci_default_filter(adev, mask);
return ata_bmdma_mode_filter(adev, mask);
}
/**
@ -274,7 +274,7 @@ unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask)
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
*
* Note: Original code is ata_tf_load().
* Note: Original code is ata_sff_tf_load().
*/
static void scc_tf_load (struct ata_port *ap, const struct ata_taskfile *tf)
@ -341,7 +341,7 @@ static u8 scc_check_status (struct ata_port *ap)
* @ap: Port from which input is read
* @tf: ATA taskfile register set for storing input
*
* Note: Original code is ata_tf_read().
* Note: Original code is ata_sff_tf_read().
*/
static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf)
@ -373,7 +373,7 @@ static void scc_tf_read (struct ata_port *ap, struct ata_taskfile *tf)
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
*
* Note: Original code is ata_exec_command().
* Note: Original code is ata_sff_exec_command().
*/
static void scc_exec_command (struct ata_port *ap,
@ -382,7 +382,7 @@ static void scc_exec_command (struct ata_port *ap,
DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command);
out_be32(ap->ioaddr.command_addr, tf->command);
ata_pause(ap);
ata_sff_pause(ap);
}
/**
@ -396,14 +396,14 @@ static u8 scc_check_altstatus (struct ata_port *ap)
}
/**
* scc_std_dev_select - Select device 0/1 on ATA bus
* scc_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
* @device: ATA device (numbered from zero) to select
*
* Note: Original code is ata_std_dev_select().
* Note: Original code is ata_sff_dev_select().
*/
static void scc_std_dev_select (struct ata_port *ap, unsigned int device)
static void scc_dev_select (struct ata_port *ap, unsigned int device)
{
u8 tmp;
@ -413,7 +413,7 @@ static void scc_std_dev_select (struct ata_port *ap, unsigned int device)
tmp = ATA_DEVICE_OBS | ATA_DEV1;
out_be32(ap->ioaddr.device_addr, tmp);
ata_pause(ap);
ata_sff_pause(ap);
}
/**
@ -441,7 +441,7 @@ static void scc_bmdma_setup (struct ata_queued_cmd *qc)
out_be32(mmio + SCC_DMA_CMD, dmactl);
/* issue r/w command */
ap->ops->exec_command(ap, &qc->tf);
ap->ops->sff_exec_command(ap, &qc->tf);
}
/**
@ -476,7 +476,7 @@ static unsigned int scc_devchk (struct ata_port *ap,
struct ata_ioports *ioaddr = &ap->ioaddr;
u8 nsect, lbal;
ap->ops->dev_select(ap, device);
ap->ops->sff_dev_select(ap, device);
out_be32(ioaddr->nsect_addr, 0x55);
out_be32(ioaddr->lbal_addr, 0xaa);
@ -497,57 +497,78 @@ static unsigned int scc_devchk (struct ata_port *ap,
}
/**
* scc_bus_post_reset - PATA device post reset
* scc_wait_after_reset - wait for devices to become ready after reset
*
* Note: Original code is ata_bus_post_reset().
* Note: Original code is ata_sff_wait_after_reset
*/
static int scc_bus_post_reset(struct ata_port *ap, unsigned int devmask,
int scc_wait_after_reset(struct ata_link *link, unsigned int devmask,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int dev0 = devmask & (1 << 0);
unsigned int dev1 = devmask & (1 << 1);
int rc;
int rc, ret = 0;
/* if device 0 was found in ata_devchk, wait for its
* BSY bit to clear
/* Spec mandates ">= 2ms" before checking status. We wait
* 150ms, because that was the magic delay used for ATAPI
* devices in Hale Landis's ATADRVR, for the period of time
* between when the ATA command register is written, and then
* status is checked. Because waiting for "a while" before
* checking status is fine, post SRST, we perform this magic
* delay here as well.
*
* Old drivers/ide uses the 2mS rule and then waits for ready.
*/
if (dev0) {
rc = ata_wait_ready(ap, deadline);
if (rc && rc != -ENODEV)
msleep(150);
/* always check readiness of the master device */
rc = ata_sff_wait_ready(link, deadline);
/* -ENODEV means the odd clown forgot the D7 pulldown resistor
* and TF status is 0xff, bail out on it too.
*/
if (rc)
return rc;
}
/* if device 1 was found in ata_devchk, wait for
* register access, then wait for BSY to clear
/* if device 1 was found in ata_devchk, wait for register
* access briefly, then wait for BSY to clear.
*/
while (dev1) {
if (dev1) {
int i;
ap->ops->sff_dev_select(ap, 1);
/* Wait for register access. Some ATAPI devices fail
* to set nsect/lbal after reset, so don't waste too
* much time on it. We're gonna wait for !BSY anyway.
*/
for (i = 0; i < 2; i++) {
u8 nsect, lbal;
ap->ops->dev_select(ap, 1);
nsect = in_be32(ioaddr->nsect_addr);
lbal = in_be32(ioaddr->lbal_addr);
if ((nsect == 1) && (lbal == 1))
break;
if (time_after(jiffies, deadline))
return -EBUSY;
msleep(50); /* give drive a breather */
}
if (dev1) {
rc = ata_wait_ready(ap, deadline);
if (rc && rc != -ENODEV)
rc = ata_sff_wait_ready(link, deadline);
if (rc) {
if (rc != -ENODEV)
return rc;
ret = rc;
}
}
/* is all this really necessary? */
ap->ops->dev_select(ap, 0);
ap->ops->sff_dev_select(ap, 0);
if (dev1)
ap->ops->dev_select(ap, 1);
ap->ops->sff_dev_select(ap, 1);
if (dev0)
ap->ops->dev_select(ap, 0);
ap->ops->sff_dev_select(ap, 0);
return 0;
return ret;
}
/**
@ -570,31 +591,21 @@ static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
udelay(20);
out_be32(ioaddr->ctl_addr, ap->ctl);
/* wait a while before checking status */
ata_wait_after_reset(ap, deadline);
/* Before we perform post reset processing we want to see if
* the bus shows 0xFF because the odd clown forgets the D7
* pulldown resistor.
*/
if (scc_check_status(ap) == 0xFF)
return 0;
scc_bus_post_reset(ap, devmask, deadline);
scc_wait_after_reset(&ap->link, devmask, deadline);
return 0;
}
/**
* scc_std_softreset - reset host port via ATA SRST
* scc_softreset - reset host port via ATA SRST
* @ap: port to reset
* @classes: resulting classes of attached devices
* @deadline: deadline jiffies for the operation
*
* Note: Original code is ata_std_softreset().
* Note: Original code is ata_sff_softreset().
*/
static int scc_std_softreset(struct ata_link *link, unsigned int *classes,
static int scc_softreset(struct ata_link *link, unsigned int *classes,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
@ -604,11 +615,6 @@ static int scc_std_softreset(struct ata_link *link, unsigned int *classes,
DPRINTK("ENTER\n");
if (ata_link_offline(link)) {
classes[0] = ATA_DEV_NONE;
goto out;
}
/* determine if device 0/1 are present */
if (scc_devchk(ap, 0))
devmask |= (1 << 0);
@ -616,7 +622,7 @@ static int scc_std_softreset(struct ata_link *link, unsigned int *classes,
devmask |= (1 << 1);
/* select device 0 again */
ap->ops->dev_select(ap, 0);
ap->ops->sff_dev_select(ap, 0);
/* issue bus reset */
DPRINTK("about to softreset, devmask=%x\n", devmask);
@ -628,13 +634,12 @@ static int scc_std_softreset(struct ata_link *link, unsigned int *classes,
}
/* determine by signature whether we have ATA or ATAPI devices */
classes[0] = ata_dev_try_classify(&ap->link.device[0],
classes[0] = ata_sff_dev_classify(&ap->link.device[0],
devmask & (1 << 0), &err);
if (slave_possible && err != 0x81)
classes[1] = ata_dev_try_classify(&ap->link.device[1],
classes[1] = ata_sff_dev_classify(&ap->link.device[1],
devmask & (1 << 1), &err);
out:
DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
return 0;
}
@ -695,7 +700,7 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc)
printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
/* TBD: SW reset */
scc_std_softreset(&ap->link, &classes, deadline);
scc_softreset(&ap->link, &classes, deadline);
continue;
}
@ -721,7 +726,7 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc)
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
ata_altstatus(ap); /* dummy read */
ata_sff_altstatus(ap); /* dummy read */
}
/**
@ -742,7 +747,7 @@ static u8 scc_bmdma_status (struct ata_port *ap)
return host_stat;
/* errata A252,A308 workaround: Step4 */
if ((ata_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ))
if ((ata_sff_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ))
return (host_stat | ATA_DMA_INTR);
/* errata A308 workaround Step5 */
@ -773,7 +778,7 @@ static u8 scc_bmdma_status (struct ata_port *ap)
* @buflen: buffer length
* @rw: read/write
*
* Note: Original code is ata_data_xfer().
* Note: Original code is ata_sff_data_xfer().
*/
static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
@ -782,28 +787,28 @@ static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
struct ata_port *ap = dev->link->ap;
unsigned int words = buflen >> 1;
unsigned int i;
u16 *buf16 = (u16 *) buf;
__le16 *buf16 = (__le16 *) buf;
void __iomem *mmio = ap->ioaddr.data_addr;
/* Transfer multiple of 2 bytes */
if (rw == READ)
for (i = 0; i < words; i++)
buf16[i] = le16_to_cpu(in_be32(mmio));
buf16[i] = cpu_to_le16(in_be32(mmio));
else
for (i = 0; i < words; i++)
out_be32(mmio, cpu_to_le16(buf16[i]));
out_be32(mmio, le16_to_cpu(buf16[i]));
/* Transfer trailing 1 byte, if any. */
if (unlikely(buflen & 0x01)) {
u16 align_buf[1] = { 0 };
__le16 align_buf[1] = { 0 };
unsigned char *trailing_buf = buf + buflen - 1;
if (rw == READ) {
align_buf[0] = le16_to_cpu(in_be32(mmio));
align_buf[0] = cpu_to_le16(in_be32(mmio));
memcpy(trailing_buf, align_buf, 1);
} else {
memcpy(align_buf, trailing_buf, 1);
out_be32(mmio, cpu_to_le16(align_buf[0]));
out_be32(mmio, le16_to_cpu(align_buf[0]));
}
words++;
}
@ -815,7 +820,7 @@ static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
* scc_irq_on - Enable interrupts on a port.
* @ap: Port on which interrupts are enabled.
*
* Note: Original code is ata_irq_on().
* Note: Original code is ata_sff_irq_on().
*/
static u8 scc_irq_on (struct ata_port *ap)
@ -829,19 +834,19 @@ static u8 scc_irq_on (struct ata_port *ap)
out_be32(ioaddr->ctl_addr, ap->ctl);
tmp = ata_wait_idle(ap);
ap->ops->irq_clear(ap);
ap->ops->sff_irq_clear(ap);
return tmp;
}
/**
* scc_bmdma_freeze - Freeze BMDMA controller port
* scc_freeze - Freeze BMDMA controller port
* @ap: port to freeze
*
* Note: Original code is ata_bmdma_freeze().
* Note: Original code is ata_sff_freeze().
*/
static void scc_bmdma_freeze (struct ata_port *ap)
static void scc_freeze (struct ata_port *ap)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
@ -854,9 +859,9 @@ static void scc_bmdma_freeze (struct ata_port *ap)
* ATA_NIEN manipulation. Also, many controllers fail to mask
* previously pending IRQ on ATA_NIEN assertion. Clear it.
*/
ata_chk_status(ap);
ap->ops->sff_check_status(ap);
ap->ops->irq_clear(ap);
ap->ops->sff_irq_clear(ap);
}
/**
@ -868,18 +873,18 @@ static void scc_bmdma_freeze (struct ata_port *ap)
static int scc_pata_prereset(struct ata_link *link, unsigned long deadline)
{
link->ap->cbl = ATA_CBL_PATA80;
return ata_std_prereset(link, deadline);
return ata_sff_prereset(link, deadline);
}
/**
* scc_std_postreset - standard postreset callback
* scc_postreset - standard postreset callback
* @ap: the target ata_port
* @classes: classes of attached devices
*
* Note: Original code is ata_std_postreset().
* Note: Original code is ata_sff_postreset().
*/
static void scc_std_postreset(struct ata_link *link, unsigned int *classes)
static void scc_postreset(struct ata_link *link, unsigned int *classes)
{
struct ata_port *ap = link->ap;
@ -887,9 +892,9 @@ static void scc_std_postreset(struct ata_link *link, unsigned int *classes)
/* is double-select really necessary? */
if (classes[0] != ATA_DEV_NONE)
ap->ops->dev_select(ap, 1);
ap->ops->sff_dev_select(ap, 1);
if (classes[1] != ATA_DEV_NONE)
ap->ops->dev_select(ap, 0);
ap->ops->sff_dev_select(ap, 0);
/* bail out if no device is present */
if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
@ -905,24 +910,13 @@ static void scc_std_postreset(struct ata_link *link, unsigned int *classes)
}
/**
* scc_error_handler - Stock error handler for BMDMA controller
* @ap: port to handle error for
*/
static void scc_error_handler (struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, scc_pata_prereset, scc_std_softreset, NULL,
scc_std_postreset);
}
/**
* scc_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
* scc_irq_clear - Clear PCI IDE BMDMA interrupt.
* @ap: Port associated with this ATA transaction.
*
* Note: Original code is ata_bmdma_irq_clear().
* Note: Original code is ata_sff_irq_clear().
*/
static void scc_bmdma_irq_clear (struct ata_port *ap)
static void scc_irq_clear (struct ata_port *ap)
{
void __iomem *mmio = ap->ioaddr.bmdma_addr;
@ -968,52 +962,37 @@ static void scc_port_stop (struct ata_port *ap)
}
static struct scsi_host_template scc_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations scc_pata_ops = {
static struct ata_port_operations scc_pata_ops = {
.inherits = &ata_bmdma_port_ops,
.set_piomode = scc_set_piomode,
.set_dmamode = scc_set_dmamode,
.mode_filter = scc_mode_filter,
.tf_load = scc_tf_load,
.tf_read = scc_tf_read,
.exec_command = scc_exec_command,
.check_status = scc_check_status,
.check_altstatus = scc_check_altstatus,
.dev_select = scc_std_dev_select,
.sff_tf_load = scc_tf_load,
.sff_tf_read = scc_tf_read,
.sff_exec_command = scc_exec_command,
.sff_check_status = scc_check_status,
.sff_check_altstatus = scc_check_altstatus,
.sff_dev_select = scc_dev_select,
.bmdma_setup = scc_bmdma_setup,
.bmdma_start = scc_bmdma_start,
.bmdma_stop = scc_bmdma_stop,
.bmdma_status = scc_bmdma_status,
.data_xfer = scc_data_xfer,
.sff_data_xfer = scc_data_xfer,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.freeze = scc_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = scc_error_handler,
.freeze = scc_freeze,
.prereset = scc_pata_prereset,
.softreset = scc_softreset,
.postreset = scc_postreset,
.post_internal_cmd = scc_bmdma_stop,
.irq_clear = scc_bmdma_irq_clear,
.irq_on = scc_irq_on,
.sff_irq_clear = scc_irq_clear,
.sff_irq_on = scc_irq_on,
.port_start = scc_port_start,
.port_stop = scc_port_stop,
@ -1166,8 +1145,8 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
return rc;
return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
&scc_sht);
return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
IRQF_SHARED, &scc_sht);
}
static struct pci_driver scc_pci_driver = {

114
drivers/ata/pata_serverworks.c
Просмотреть файл

@ -199,7 +199,7 @@ static unsigned long serverworks_osb4_filter(struct ata_device *adev, unsigned l
{
if (adev->class == ATA_DEV_ATA)
mask &= ~ATA_MASK_UDMA;
return ata_pci_default_filter(adev, mask);
return ata_bmdma_mode_filter(adev, mask);
}
@ -219,7 +219,7 @@ static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned lo
/* Disk, UDMA */
if (adev->class != ATA_DEV_ATA)
return ata_pci_default_filter(adev, mask);
return ata_bmdma_mode_filter(adev, mask);
/* Actually do need to check */
ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
@ -228,7 +228,7 @@ static unsigned long serverworks_csb_filter(struct ata_device *adev, unsigned lo
if (!strcmp(p, model_num))
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
return ata_pci_default_filter(adev, mask);
return ata_bmdma_mode_filter(adev, mask);
}
/**
@ -298,89 +298,20 @@ static void serverworks_set_dmamode(struct ata_port *ap, struct ata_device *adev
}
static struct scsi_host_template serverworks_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations serverworks_osb4_port_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = serverworks_cable_detect,
.mode_filter = serverworks_osb4_filter,
.set_piomode = serverworks_set_piomode,
.set_dmamode = serverworks_set_dmamode,
.mode_filter = serverworks_osb4_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = serverworks_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static struct ata_port_operations serverworks_csb_port_ops = {
.set_piomode = serverworks_set_piomode,
.set_dmamode = serverworks_set_dmamode,
.inherits = &serverworks_osb4_port_ops,
.mode_filter = serverworks_csb_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = serverworks_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static int serverworks_fixup_osb4(struct pci_dev *pdev)
@ -468,28 +399,24 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
{
static const struct ata_port_info info[4] = {
{ /* OSB4 */
.sht = &serverworks_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = 0x07,
.port_ops = &serverworks_osb4_port_ops
}, { /* OSB4 no UDMA */
.sht = &serverworks_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = 0x00,
.port_ops = &serverworks_osb4_port_ops
}, { /* CSB5 */
.sht = &serverworks_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA4,
.port_ops = &serverworks_csb_port_ops
}, { /* CSB5 - later revisions*/
.sht = &serverworks_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -498,6 +425,11 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
}
};
const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL };
int rc;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* Force master latency timer to 64 PCI clocks */
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
@ -527,24 +459,30 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
serverworks_fixup_ht1000(pdev);
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
ata_pci_clear_simplex(pdev);
ata_pci_bmdma_clear_simplex(pdev);
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &serverworks_sht, NULL);
}
#ifdef CONFIG_PM
static int serverworks_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
/* Force master latency timer to 64 PCI clocks */
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
switch (pdev->device)
{
switch (pdev->device) {
case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
serverworks_fixup_osb4(pdev);
break;
case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
ata_pci_clear_simplex(pdev);
ata_pci_bmdma_clear_simplex(pdev);
/* fall through */
case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
@ -554,7 +492,9 @@ static int serverworks_reinit_one(struct pci_dev *pdev)
serverworks_fixup_ht1000(pdev);
break;
}
return ata_pci_device_resume(pdev);
ata_host_resume(host);
return 0;
}
#endif

71
drivers/ata/pata_sil680.c
Просмотреть файл

@ -192,54 +192,14 @@ static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
}
static struct scsi_host_template sil680_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations sil680_port_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = sil680_cable_detect,
.set_piomode = sil680_set_piomode,
.set_dmamode = sil680_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = sil680_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
/**
@ -322,7 +282,6 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.sht = &sil680_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -330,7 +289,6 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
.port_ops = &sil680_port_ops
};
static const struct ata_port_info info_slow = {
.sht = &sil680_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -346,6 +304,10 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
return rc;
switch (sil680_init_chip(pdev, &try_mmio)) {
case 0:
ppi[0] = &info_slow;
@ -388,28 +350,33 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
host->ports[0]->ioaddr.cmd_addr = mmio_base + 0x80;
host->ports[0]->ioaddr.ctl_addr = mmio_base + 0x8a;
host->ports[0]->ioaddr.altstatus_addr = mmio_base + 0x8a;
ata_std_ports(&host->ports[0]->ioaddr);
ata_sff_std_ports(&host->ports[0]->ioaddr);
host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x08;
host->ports[1]->ioaddr.cmd_addr = mmio_base + 0xc0;
host->ports[1]->ioaddr.ctl_addr = mmio_base + 0xca;
host->ports[1]->ioaddr.altstatus_addr = mmio_base + 0xca;
ata_std_ports(&host->ports[1]->ioaddr);
ata_sff_std_ports(&host->ports[1]->ioaddr);
/* Register & activate */
return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
&sil680_sht);
return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
IRQF_SHARED, &sil680_sht);
use_ioports:
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL);
}
#ifdef CONFIG_PM
static int sil680_reinit_one(struct pci_dev *pdev)
{
int try_mmio;
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int try_mmio, rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
sil680_init_chip(pdev, &try_mmio);
return ata_pci_device_resume(pdev);
ata_host_resume(host);
return 0;
}
#endif

232
drivers/ata/pata_sis.c
Просмотреть файл

@ -156,23 +156,10 @@ static int sis_pre_reset(struct ata_link *link, unsigned long deadline)
/* Clear the FIFO settings. We can't enable the FIFO until
we know we are poking at a disk */
pci_write_config_byte(pdev, 0x4B, 0);
return ata_std_prereset(link, deadline);
return ata_sff_prereset(link, deadline);
}
/**
* sis_error_handler - Probe specified port on PATA host controller
* @ap: Port to probe
*
* LOCKING:
* None (inherited from caller).
*/
static void sis_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, sis_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
}
/**
* sis_set_fifo - Set RWP fifo bits for this device
* @ap: Port
@ -514,217 +501,57 @@ static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev)
}
static struct scsi_host_template sis_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations sis_133_ops = {
static struct ata_port_operations sis_133_for_sata_ops = {
.inherits = &ata_bmdma_port_ops,
.set_piomode = sis_133_set_piomode,
.set_dmamode = sis_133_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = sis_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = sis_133_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static const struct ata_port_operations sis_133_for_sata_ops = {
static struct ata_port_operations sis_base_ops = {
.inherits = &ata_bmdma_port_ops,
.prereset = sis_pre_reset,
};
static struct ata_port_operations sis_133_ops = {
.inherits = &sis_base_ops,
.set_piomode = sis_133_set_piomode,
.set_dmamode = sis_133_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = sis_133_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static const struct ata_port_operations sis_133_early_ops = {
static struct ata_port_operations sis_133_early_ops = {
.inherits = &sis_base_ops,
.set_piomode = sis_100_set_piomode,
.set_dmamode = sis_133_early_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = sis_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = sis_66_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static const struct ata_port_operations sis_100_ops = {
static struct ata_port_operations sis_100_ops = {
.inherits = &sis_base_ops,
.set_piomode = sis_100_set_piomode,
.set_dmamode = sis_100_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = sis_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = sis_66_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static const struct ata_port_operations sis_66_ops = {
static struct ata_port_operations sis_66_ops = {
.inherits = &sis_base_ops,
.set_piomode = sis_old_set_piomode,
.set_dmamode = sis_66_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.cable_detect = sis_66_cable_detect,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = sis_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static const struct ata_port_operations sis_old_ops = {
static struct ata_port_operations sis_old_ops = {
.inherits = &sis_base_ops,
.set_piomode = sis_old_set_piomode,
.set_dmamode = sis_old_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = sis_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
};
static const struct ata_port_info sis_info = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07,
@ -732,7 +559,6 @@ static const struct ata_port_info sis_info = {
.port_ops = &sis_old_ops,
};
static const struct ata_port_info sis_info33 = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07,
@ -740,42 +566,36 @@ static const struct ata_port_info sis_info33 = {
.port_ops = &sis_old_ops,
};
static const struct ata_port_info sis_info66 = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA4, /* UDMA 66 */
.port_ops = &sis_66_ops,
};
static const struct ata_port_info sis_info100 = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA5,
.port_ops = &sis_100_ops,
};
static const struct ata_port_info sis_info100_early = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.udma_mask = ATA_UDMA5,
.pio_mask = 0x1f, /* pio0-4 */
.port_ops = &sis_66_ops,
};
static const struct ata_port_info sis_info133 = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &sis_133_ops,
};
const struct ata_port_info sis_info133_for_sata = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &sis_133_for_sata_ops,
};
static const struct ata_port_info sis_info133_early = {
.sht = &sis_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
@ -857,11 +677,11 @@ static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis)
static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
struct ata_port_info port;
const struct ata_port_info *ppi[] = { &port, NULL };
const struct ata_port_info *ppi[] = { NULL, NULL };
struct pci_dev *host = NULL;
struct sis_chipset *chipset = NULL;
struct sis_chipset *sets;
int rc;
static struct sis_chipset sis_chipsets[] = {
@ -914,8 +734,11 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
/* We have to find the bridge first */
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* We have to find the bridge first */
for (sets = &sis_chipsets[0]; sets->device; sets++) {
host = pci_get_device(PCI_VENDOR_ID_SI, sets->device, NULL);
if (host != NULL) {
@ -994,12 +817,11 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (chipset == NULL)
return -ENODEV;
port = *chipset->info;
port.private_data = chipset;
ppi[0] = chipset->info;
sis_fixup(pdev, chipset);
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset);
}
static const struct pci_device_id sis_pci_tbl[] = {

67
drivers/ata/pata_sl82c105.c
Просмотреть файл

@ -60,13 +60,7 @@ static int sl82c105_pre_reset(struct ata_link *link, unsigned long deadline)
if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no]))
return -ENOENT;
return ata_std_prereset(link, deadline);
}
static void sl82c105_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, sl82c105_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
@ -235,55 +229,17 @@ static int sl82c105_qc_defer(struct ata_queued_cmd *qc)
}
static struct scsi_host_template sl82c105_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations sl82c105_port_ops = {
.set_piomode = sl82c105_set_piomode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = sl82c105_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.inherits = &ata_bmdma_port_ops,
.qc_defer = sl82c105_qc_defer,
.bmdma_start = sl82c105_bmdma_start,
.bmdma_stop = sl82c105_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_defer = sl82c105_qc_defer,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.cable_detect = ata_cable_40wire,
.set_piomode = sl82c105_set_piomode,
.prereset = sl82c105_pre_reset,
};
/**
@ -327,14 +283,12 @@ static int sl82c105_bridge_revision(struct pci_dev *pdev)
static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info_dma = {
.sht = &sl82c105_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.port_ops = &sl82c105_port_ops
};
static const struct ata_port_info info_early = {
.sht = &sl82c105_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.port_ops = &sl82c105_port_ops
@ -344,6 +298,11 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
NULL };
u32 val;
int rev;
int rc;
rc = pcim_enable_device(dev);
if (rc)
return rc;
rev = sl82c105_bridge_revision(dev);
@ -358,7 +317,7 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
return ata_pci_init_one(dev, ppi);
return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL);
}
static const struct pci_device_id sl82c105[] = {

58
drivers/ata/pata_triflex.c
Просмотреть файл

@ -66,16 +66,11 @@ static int triflex_prereset(struct ata_link *link, unsigned long deadline)
if (!pci_test_config_bits(pdev, &triflex_enable_bits[ap->port_no]))
return -ENOENT;
return ata_std_prereset(link, deadline);
return ata_sff_prereset(link, deadline);
}
static void triflex_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, triflex_prereset, ata_std_softreset, NULL, ata_std_postreset);
}
/**
* triflex_load_timing - timing configuration
* @ap: ATA interface
@ -180,60 +175,21 @@ static void triflex_bmdma_stop(struct ata_queued_cmd *qc)
}
static struct scsi_host_template triflex_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations triflex_port_ops = {
.set_piomode = triflex_set_piomode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = triflex_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_40wire,
.bmdma_setup = ata_bmdma_setup,
.inherits = &ata_bmdma_port_ops,
.bmdma_start = triflex_bmdma_start,
.bmdma_stop = triflex_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.cable_detect = ata_cable_40wire,
.set_piomode = triflex_set_piomode,
.prereset = triflex_prereset,
};
static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.sht = &triflex_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -245,7 +201,7 @@ static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
return ata_pci_init_one(dev, ppi);
return ata_pci_sff_init_one(dev, ppi, &triflex_sht, NULL);
}
static const struct pci_device_id triflex[] = {

134
drivers/ata/pata_via.c
Просмотреть файл

@ -210,22 +210,10 @@ static int via_pre_reset(struct ata_link *link, unsigned long deadline)
return -ENOENT;
}
return ata_std_prereset(link, deadline);
return ata_sff_prereset(link, deadline);
}
/**
* via_error_handler - reset for VIA chips
* @ap: ATA port
*
* Handle the reset callback for the later chips with cable detect
*/
static void via_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, via_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
}
/**
* via_do_set_mode - set initial PIO mode data
* @ap: ATA interface
@ -335,89 +323,20 @@ static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev)
}
static struct scsi_host_template via_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations via_port_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = via_cable_detect,
.set_piomode = via_set_piomode,
.set_dmamode = via_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = via_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = via_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.prereset = via_pre_reset,
};
static struct ata_port_operations via_port_ops_noirq = {
.set_piomode = via_set_piomode,
.set_dmamode = via_set_dmamode,
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = via_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = via_cable_detect,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer_noirq,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.inherits = &via_port_ops,
.sff_data_xfer = ata_sff_data_xfer_noirq,
};
/**
@ -467,7 +386,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
/* Early VIA without UDMA support */
static const struct ata_port_info via_mwdma_info = {
.sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -475,7 +393,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
/* Ditto with IRQ masking required */
static const struct ata_port_info via_mwdma_info_borked = {
.sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -483,7 +400,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
/* VIA UDMA 33 devices (and borked 66) */
static const struct ata_port_info via_udma33_info = {
.sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -492,7 +408,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
/* VIA UDMA 66 devices */
static const struct ata_port_info via_udma66_info = {
.sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -501,7 +416,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
/* VIA UDMA 100 devices */
static const struct ata_port_info via_udma100_info = {
.sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
@ -510,24 +424,27 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
/* UDMA133 with bad AST (All current 133) */
static const struct ata_port_info via_udma133_info = {
.sht = &via_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x07,
.udma_mask = ATA_UDMA6, /* FIXME: should check north bridge */
.port_ops = &via_port_ops
};
struct ata_port_info type;
const struct ata_port_info *ppi[] = { &type, NULL };
const struct ata_port_info *ppi[] = { NULL, NULL };
struct pci_dev *isa = NULL;
const struct via_isa_bridge *config;
static int printed_version;
u8 enable;
u32 timing;
int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* To find out how the IDE will behave and what features we
actually have to look at the bridge not the IDE controller */
for (config = via_isa_bridges; config->id; config++)
@ -561,25 +478,25 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
switch(config->flags & VIA_UDMA) {
case VIA_UDMA_NONE:
if (config->flags & VIA_NO_UNMASK)
type = via_mwdma_info_borked;
ppi[0] = &via_mwdma_info_borked;
else
type = via_mwdma_info;
ppi[0] = &via_mwdma_info;
break;
case VIA_UDMA_33:
type = via_udma33_info;
ppi[0] = &via_udma33_info;
break;
case VIA_UDMA_66:
type = via_udma66_info;
ppi[0] = &via_udma66_info;
/* The 66 MHz devices require we enable the clock */
pci_read_config_dword(pdev, 0x50, &timing);
timing |= 0x80008;
pci_write_config_dword(pdev, 0x50, timing);
break;
case VIA_UDMA_100:
type = via_udma100_info;
ppi[0] = &via_udma100_info;
break;
case VIA_UDMA_133:
type = via_udma133_info;
ppi[0] = &via_udma133_info;
break;
default:
WARN_ON(1);
@ -594,9 +511,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
}
/* We have established the device type, now fire it up */
type.private_data = (void *)config;
return ata_pci_init_one(pdev, ppi);
return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config);
}
#ifdef CONFIG_PM
@ -615,6 +530,11 @@ static int via_reinit_one(struct pci_dev *pdev)
u32 timing;
struct ata_host *host = dev_get_drvdata(&pdev->dev);
const struct via_isa_bridge *config = host->private_data;
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
via_config_fifo(pdev, config->flags);
@ -630,7 +550,9 @@ static int via_reinit_one(struct pci_dev *pdev)
timing &= ~0x80008;
pci_write_config_dword(pdev, 0x50, timing);
}
return ata_pci_device_resume(pdev);
ata_host_resume(host);
return 0;
}
#endif

47
drivers/ata/pata_winbond.c
Просмотреть файл

@ -116,53 +116,20 @@ static unsigned int winbond_data_xfer(struct ata_device *dev,
buflen += 4 - slop;
}
} else
buflen = ata_data_xfer(dev, buf, buflen, rw);
buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
return buflen;
}
static struct scsi_host_template winbond_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_PIO_SHT(DRV_NAME),
};
static struct ata_port_operations winbond_port_ops = {
.set_piomode = winbond_set_piomode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.inherits = &ata_sff_port_ops,
.sff_data_xfer = winbond_data_xfer,
.cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = winbond_data_xfer,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_sff_port_start,
.set_piomode = winbond_set_piomode,
};
/**
@ -231,7 +198,7 @@ static __init int winbond_init_one(unsigned long port)
ap->ioaddr.cmd_addr = cmd_addr;
ap->ioaddr.altstatus_addr = ctl_addr;
ap->ioaddr.ctl_addr = ctl_addr;
ata_std_ports(&ap->ioaddr);
ata_sff_std_ports(&ap->ioaddr);
/* hook in a private data structure per channel */
host->private_data = &winbond_data[nr_winbond_host];
@ -239,7 +206,7 @@ static __init int winbond_init_one(unsigned long port)
winbond_data[nr_winbond_host].platform_dev = pdev;
/* activate */
rc = ata_host_activate(host, 14 + i, ata_interrupt, 0,
rc = ata_host_activate(host, 14 + i, ata_sff_interrupt, 0,
&winbond_sht);
if (rc)
goto err_unregister;

80
drivers/ata/pdc_adma.c
Просмотреть файл

@ -131,56 +131,33 @@ struct adma_port_priv {
static int adma_ata_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent);
static int adma_port_start(struct ata_port *ap);
static void adma_host_stop(struct ata_host *host);
static void adma_port_stop(struct ata_port *ap);
static void adma_qc_prep(struct ata_queued_cmd *qc);
static unsigned int adma_qc_issue(struct ata_queued_cmd *qc);
static int adma_check_atapi_dma(struct ata_queued_cmd *qc);
static void adma_bmdma_stop(struct ata_queued_cmd *qc);
static u8 adma_bmdma_status(struct ata_port *ap);
static void adma_irq_clear(struct ata_port *ap);
static void adma_freeze(struct ata_port *ap);
static void adma_thaw(struct ata_port *ap);
static void adma_error_handler(struct ata_port *ap);
static int adma_prereset(struct ata_link *link, unsigned long deadline);
static struct scsi_host_template adma_ata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
.proc_name = DRV_NAME,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = LIBATA_MAX_PRD,
.dma_boundary = ADMA_DMA_BOUNDARY,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.emulated = ATA_SHT_EMULATED,
};
static const struct ata_port_operations adma_ata_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.exec_command = ata_exec_command,
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
static struct ata_port_operations adma_ata_ops = {
.inherits = &ata_sff_port_ops,
.check_atapi_dma = adma_check_atapi_dma,
.data_xfer = ata_data_xfer,
.qc_prep = adma_qc_prep,
.qc_issue = adma_qc_issue,
.freeze = adma_freeze,
.thaw = adma_thaw,
.error_handler = adma_error_handler,
.irq_clear = adma_irq_clear,
.irq_on = ata_irq_on,
.prereset = adma_prereset,
.port_start = adma_port_start,
.port_stop = adma_port_stop,
.host_stop = adma_host_stop,
.bmdma_stop = adma_bmdma_stop,
.bmdma_status = adma_bmdma_status,
};
static struct ata_port_info adma_port_info[] = {
@ -213,21 +190,6 @@ static int adma_check_atapi_dma(struct ata_queued_cmd *qc)
return 1; /* ATAPI DMA not yet supported */
}
static void adma_bmdma_stop(struct ata_queued_cmd *qc)
{
/* nothing */
}
static u8 adma_bmdma_status(struct ata_port *ap)
{
return 0;
}
static void adma_irq_clear(struct ata_port *ap)
{
/* nothing */
}
static void adma_reset_engine(struct ata_port *ap)
{
void __iomem *chan = ADMA_PORT_REGS(ap);
@ -246,7 +208,7 @@ static void adma_reinit_engine(struct ata_port *ap)
/* mask/clear ATA interrupts */
writeb(ATA_NIEN, ap->ioaddr.ctl_addr);
ata_check_status(ap);
ata_sff_check_status(ap);
/* reset the ADMA engine */
adma_reset_engine(ap);
@ -281,7 +243,7 @@ static void adma_freeze(struct ata_port *ap)
/* mask/clear ATA interrupts */
writeb(ATA_NIEN, ap->ioaddr.ctl_addr);
ata_check_status(ap);
ata_sff_check_status(ap);
/* reset ADMA to idle state */
writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL);
@ -304,13 +266,7 @@ static int adma_prereset(struct ata_link *link, unsigned long deadline)
pp->state = adma_state_mmio;
adma_reinit_engine(ap);
return ata_std_prereset(link, deadline);
}
static void adma_error_handler(struct ata_port *ap)
{
ata_do_eh(ap, adma_prereset, ata_std_softreset, NULL,
ata_std_postreset);
return ata_sff_prereset(link, deadline);
}
static int adma_fill_sg(struct ata_queued_cmd *qc)
@ -366,7 +322,7 @@ static void adma_qc_prep(struct ata_queued_cmd *qc)
adma_enter_reg_mode(qc->ap);
if (qc->tf.protocol != ATA_PROT_DMA) {
ata_qc_prep(qc);
ata_sff_qc_prep(qc);
return;
}
@ -465,7 +421,7 @@ static unsigned int adma_qc_issue(struct ata_queued_cmd *qc)
}
pp->state = adma_state_mmio;
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
static inline unsigned int adma_intr_pkt(struct ata_host *host)
@ -536,7 +492,7 @@ static inline unsigned int adma_intr_mmio(struct ata_host *host)
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
/* check main status, clearing INTRQ */
u8 status = ata_check_status(ap);
u8 status = ata_sff_check_status(ap);
if ((status & ATA_BUSY))
continue;
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
@ -633,14 +589,6 @@ static void adma_port_stop(struct ata_port *ap)
adma_reset_engine(ap);
}
static void adma_host_stop(struct ata_host *host)
{
unsigned int port_no;
for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
adma_reset_engine(host->ports[port_no]);
}
static void adma_host_init(struct ata_host *host, unsigned int chip_id)
{
unsigned int port_no;

136
drivers/ata/sata_fsl.c
Просмотреть файл

@ -35,7 +35,6 @@ enum {
SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
ATA_FLAG_NCQ),
SATA_FSL_HOST_LFLAGS = ATA_LFLAG_SKIP_D2H_BSY,
SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH,
SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */
@ -245,17 +244,6 @@ struct sata_fsl_port_priv {
dma_addr_t cmdslot_paddr;
struct command_desc *cmdentry;
dma_addr_t cmdentry_paddr;
/*
* SATA FSL controller has a Status FIS which should contain the
* received D2H FIS & taskfile registers. This SFIS is present in
* the command descriptor, and to have a ready reference to it,
* we are caching it here, quite similar to what is done in H/W on
* AHCI compliant devices by copying taskfile fields to a 32-bit
* register.
*/
struct ata_taskfile tf;
};
/*
@ -465,6 +453,20 @@ static unsigned int sata_fsl_qc_issue(struct ata_queued_cmd *qc)
return 0;
}
static bool sata_fsl_qc_fill_rtf(struct ata_queued_cmd *qc)
{
struct sata_fsl_port_priv *pp = qc->ap->private_data;
struct sata_fsl_host_priv *host_priv = qc->ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
struct command_desc *cd;
cd = pp->cmdentry + tag;
ata_tf_from_fis(cd->sfis, &qc->result_tf);
return true;
}
static int sata_fsl_scr_write(struct ata_port *ap, unsigned int sc_reg_in,
u32 val)
{
@ -556,38 +558,6 @@ static void sata_fsl_thaw(struct ata_port *ap)
ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
}
/*
* NOTE : 1st D2H FIS from device does not update sfis in command descriptor.
*/
static inline void sata_fsl_cache_taskfile_from_d2h_fis(struct ata_queued_cmd
*qc,
struct ata_port *ap)
{
struct sata_fsl_port_priv *pp = ap->private_data;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
struct command_desc *cd;
cd = pp->cmdentry + tag;
ata_tf_from_fis(cd->sfis, &pp->tf);
}
static u8 sata_fsl_check_status(struct ata_port *ap)
{
struct sata_fsl_port_priv *pp = ap->private_data;
return pp->tf.command;
}
static void sata_fsl_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct sata_fsl_port_priv *pp = ap->private_data;
*tf = pp->tf;
}
static int sata_fsl_port_start(struct ata_port *ap)
{
struct device *dev = ap->host->dev;
@ -708,6 +678,15 @@ static unsigned int sata_fsl_dev_classify(struct ata_port *ap)
return ata_dev_classify(&tf);
}
static int sata_fsl_prereset(struct ata_linke *link, unsigned long deadline)
{
/* FIXME: Never skip softreset, sata_fsl_softreset() is
* combination of soft and hard resets. sata_fsl_softreset()
* needs to be splitted into soft and hard resets.
*/
return 0;
}
static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
@ -913,16 +892,6 @@ err:
return -EIO;
}
static void sata_fsl_error_handler(struct ata_port *ap)
{
DPRINTK("in xx_error_handler\n");
/* perform recovery */
ata_do_eh(ap, ata_std_prereset, sata_fsl_softreset, sata_std_hardreset,
ata_std_postreset);
}
static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc)
{
if (qc->flags & ATA_QCFLAG_FAILED)
@ -934,11 +903,6 @@ static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc)
}
}
static void sata_fsl_irq_clear(struct ata_port *ap)
{
/* unused */
}
static void sata_fsl_error_intr(struct ata_port *ap)
{
struct ata_link *link = &ap->link;
@ -996,7 +960,7 @@ static void sata_fsl_error_intr(struct ata_port *ap)
/* handle fatal errors */
if (hstatus & FATAL_ERROR_DECODE) {
err_mask |= AC_ERR_ATA_BUS;
action |= ATA_EH_SOFTRESET;
action |= ATA_EH_RESET;
/* how will fatal error interrupts be completed ?? */
freeze = 1;
}
@ -1013,10 +977,9 @@ static void sata_fsl_error_intr(struct ata_port *ap)
/* record error info */
qc = ata_qc_from_tag(ap, link->active_tag);
if (qc) {
sata_fsl_cache_taskfile_from_d2h_fis(qc, qc->ap);
if (qc)
qc->err_mask |= err_mask;
} else
else
ehi->err_mask |= err_mask;
ehi->action |= action;
@ -1029,14 +992,6 @@ static void sata_fsl_error_intr(struct ata_port *ap)
ata_port_abort(ap);
}
static void sata_fsl_qc_complete(struct ata_queued_cmd *qc)
{
if (qc->flags & ATA_QCFLAG_RESULT_TF) {
DPRINTK("xx_qc_complete called\n");
sata_fsl_cache_taskfile_from_d2h_fis(qc, qc->ap);
}
}
static void sata_fsl_host_intr(struct ata_port *ap)
{
struct ata_link *link = &ap->link;
@ -1077,10 +1032,8 @@ static void sata_fsl_host_intr(struct ata_port *ap)
for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) {
if (qc_active & (1 << i)) {
qc = ata_qc_from_tag(ap, i);
if (qc) {
sata_fsl_qc_complete(qc);
if (qc)
ata_qc_complete(qc);
}
DPRINTK
("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n",
i, ioread32(hcr_base + CC),
@ -1096,10 +1049,8 @@ static void sata_fsl_host_intr(struct ata_port *ap)
DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n",
link->active_tag, ioread32(hcr_base + CC));
if (qc) {
sata_fsl_qc_complete(qc);
if (qc)
ata_qc_complete(qc);
}
} else {
/* Spurious Interrupt!! */
DPRINTK("spurious interrupt!!, CC = 0x%x\n",
@ -1197,41 +1148,26 @@ static int sata_fsl_init_controller(struct ata_host *host)
* scsi mid-layer and libata interface structures
*/
static struct scsi_host_template sata_fsl_sht = {
.module = THIS_MODULE,
.name = "sata_fsl",
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.change_queue_depth = ata_scsi_change_queue_depth,
ATA_NCQ_SHT("sata_fsl"),
.can_queue = SATA_FSL_QUEUE_DEPTH,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = SATA_FSL_MAX_PRD_USABLE,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = "sata_fsl",
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
static const struct ata_port_operations sata_fsl_ops = {
.check_status = sata_fsl_check_status,
.check_altstatus = sata_fsl_check_status,
.dev_select = ata_noop_dev_select,
.tf_read = sata_fsl_tf_read,
.inherits = &sata_port_ops,
.qc_prep = sata_fsl_qc_prep,
.qc_issue = sata_fsl_qc_issue,
.irq_clear = sata_fsl_irq_clear,
.qc_fill_rtf = sata_fsl_qc_fill_rtf,
.scr_read = sata_fsl_scr_read,
.scr_write = sata_fsl_scr_write,
.freeze = sata_fsl_freeze,
.thaw = sata_fsl_thaw,
.error_handler = sata_fsl_error_handler,
.prereset = sata_fsl_prereset,
.softreset = sata_fsl_softreset,
.post_internal_cmd = sata_fsl_post_internal_cmd,
.port_start = sata_fsl_port_start,
@ -1241,7 +1177,6 @@ static const struct ata_port_operations sata_fsl_ops = {
static const struct ata_port_info sata_fsl_port_info[] = {
{
.flags = SATA_FSL_HOST_FLAGS,
.link_flags = SATA_FSL_HOST_LFLAGS,
.pio_mask = 0x1f, /* pio 0-4 */
.udma_mask = 0x7f, /* udma 0-6 */
.port_ops = &sata_fsl_ops,
@ -1297,11 +1232,6 @@ static int sata_fsl_probe(struct of_device *ofdev,
/* host->iomap is not used currently */
host->private_data = host_priv;
/* setup port(s) */
host->ports[0]->ioaddr.cmd_addr = host_priv->hcr_base;
host->ports[0]->ioaddr.scr_addr = host_priv->ssr_base;
/* initialize host controller */
sata_fsl_init_controller(host);

73
drivers/ata/sata_inic162x.c
Просмотреть файл

@ -109,21 +109,7 @@ struct inic_port_priv {
};
static struct scsi_host_template inic_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const int scr_map[] = {
@ -236,7 +222,7 @@ static void inic_bmdma_setup(struct ata_queued_cmd *qc)
writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
/* issue r/w command */
ap->ops->exec_command(ap, &qc->tf);
ap->ops->sff_exec_command(ap, &qc->tf);
}
static void inic_bmdma_start(struct ata_queued_cmd *qc)
@ -266,11 +252,6 @@ static u8 inic_bmdma_status(struct ata_port *ap)
return ATA_DMA_INTR;
}
static void inic_irq_clear(struct ata_port *ap)
{
/* noop */
}
static void inic_host_intr(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
@ -286,14 +267,14 @@ static void inic_host_intr(struct ata_port *ap)
ata_qc_from_tag(ap, ap->link.active_tag);
if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
ata_chk_status(ap); /* clear ATA interrupt */
ap->ops->sff_check_status(ap); /* clear ATA interrupt */
return;
}
if (likely(ata_host_intr(ap, qc)))
if (likely(ata_sff_host_intr(ap, qc)))
return;
ata_chk_status(ap); /* clear ATA interrupt */
ap->ops->sff_check_status(ap); /* clear ATA interrupt */
ata_port_printk(ap, KERN_WARNING, "unhandled "
"interrupt, irq_stat=%x\n", irq_stat);
return;
@ -370,12 +351,12 @@ static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
*/
if (unlikely(qc->tf.command == ATA_CMD_ID_ATA ||
qc->tf.command == ATA_CMD_ID_ATAPI)) {
u8 stat = ata_chk_status(ap);
u8 stat = ap->ops->sff_check_status(ap);
if (stat == 0x7f || stat == 0xff)
return AC_ERR_HSM;
}
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
static void inic_freeze(struct ata_port *ap)
@ -384,7 +365,7 @@ static void inic_freeze(struct ata_port *ap)
__inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE);
ata_chk_status(ap);
ap->ops->sff_check_status(ap);
writeb(0xff, port_base + PORT_IRQ_STAT);
readb(port_base + PORT_IRQ_STAT); /* flush */
@ -394,7 +375,7 @@ static void inic_thaw(struct ata_port *ap)
{
void __iomem *port_base = inic_port_base(ap);
ata_chk_status(ap);
ap->ops->sff_check_status(ap);
writeb(0xff, port_base + PORT_IRQ_STAT);
__inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
@ -436,10 +417,8 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class,
if (ata_link_online(link)) {
struct ata_taskfile tf;
/* wait a while before checking status */
ata_wait_after_reset(ap, deadline);
rc = ata_wait_ready(ap, deadline);
/* wait for link to become ready */
rc = ata_sff_wait_after_reset(link, 1, deadline);
/* link occupied, -ENODEV too is an error */
if (rc) {
ata_link_printk(link, KERN_WARNING, "device not ready "
@ -447,10 +426,8 @@ static int inic_hardreset(struct ata_link *link, unsigned int *class,
return rc;
}
ata_tf_read(ap, &tf);
ata_sff_tf_read(ap, &tf);
*class = ata_dev_classify(&tf);
if (*class == ATA_DEV_UNKNOWN)
*class = ATA_DEV_NONE;
}
return 0;
@ -471,8 +448,7 @@ static void inic_error_handler(struct ata_port *ap)
spin_unlock_irqrestore(ap->lock, flags);
/* PIO and DMA engines have been stopped, perform recovery */
ata_do_eh(ap, ata_std_prereset, NULL, inic_hardreset,
ata_std_postreset);
ata_std_error_handler(ap);
}
static void inic_post_internal_cmd(struct ata_queued_cmd *qc)
@ -541,35 +517,26 @@ static int inic_port_start(struct ata_port *ap)
}
static struct ata_port_operations inic_port_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.scr_read = inic_scr_read,
.scr_write = inic_scr_write,
.inherits = &ata_sff_port_ops,
.bmdma_setup = inic_bmdma_setup,
.bmdma_start = inic_bmdma_start,
.bmdma_stop = inic_bmdma_stop,
.bmdma_status = inic_bmdma_status,
.irq_clear = inic_irq_clear,
.irq_on = ata_irq_on,
.qc_prep = ata_qc_prep,
.qc_issue = inic_qc_issue,
.data_xfer = ata_data_xfer,
.freeze = inic_freeze,
.thaw = inic_thaw,
.softreset = ATA_OP_NULL, /* softreset is broken */
.hardreset = inic_hardreset,
.error_handler = inic_error_handler,
.post_internal_cmd = inic_post_internal_cmd,
.dev_config = inic_dev_config,
.port_resume = inic_port_resume,
.scr_read = inic_scr_read,
.scr_write = inic_scr_write,
.port_resume = inic_port_resume,
.port_start = inic_port_start,
};
@ -692,7 +659,7 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS);
port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR;
ata_std_ports(port);
ata_sff_std_ports(port);
ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio");
ata_port_pbar_desc(ap, MMIO_BAR, offset, "port");

630
drivers/ata/sata_mv.c
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

263
drivers/ata/sata_nv.c
Просмотреть файл

@ -309,7 +309,8 @@ static void nv_nf2_freeze(struct ata_port *ap);
static void nv_nf2_thaw(struct ata_port *ap);
static void nv_ck804_freeze(struct ata_port *ap);
static void nv_ck804_thaw(struct ata_port *ap);
static void nv_error_handler(struct ata_port *ap);
static int nv_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static int nv_adma_slave_config(struct scsi_device *sdev);
static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
@ -385,157 +386,60 @@ static struct pci_driver nv_pci_driver = {
};
static struct scsi_host_template nv_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static struct scsi_host_template nv_adma_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.change_queue_depth = ata_scsi_change_queue_depth,
ATA_NCQ_SHT(DRV_NAME),
.can_queue = NV_ADMA_MAX_CPBS,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = NV_ADMA_SGTBL_TOTAL_LEN,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = NV_ADMA_DMA_BOUNDARY,
.slave_configure = nv_adma_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
static struct scsi_host_template nv_swncq_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.change_queue_depth = ata_scsi_change_queue_depth,
ATA_NCQ_SHT(DRV_NAME),
.can_queue = ATA_MAX_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = nv_swncq_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
static const struct ata_port_operations nv_generic_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.exec_command = ata_exec_command,
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = nv_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.data_xfer = ata_data_xfer,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
static struct ata_port_operations nv_generic_ops = {
.inherits = &ata_bmdma_port_ops,
.hardreset = nv_hardreset,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
.port_start = ata_port_start,
};
static const struct ata_port_operations nv_nf2_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.exec_command = ata_exec_command,
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
static struct ata_port_operations nv_nf2_ops = {
.inherits = &nv_generic_ops,
.freeze = nv_nf2_freeze,
.thaw = nv_nf2_thaw,
.error_handler = nv_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.data_xfer = ata_data_xfer,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
.port_start = ata_port_start,
};
static const struct ata_port_operations nv_ck804_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.exec_command = ata_exec_command,
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
static struct ata_port_operations nv_ck804_ops = {
.inherits = &nv_generic_ops,
.freeze = nv_ck804_freeze,
.thaw = nv_ck804_thaw,
.error_handler = nv_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.data_xfer = ata_data_xfer,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
.port_start = ata_port_start,
.host_stop = nv_ck804_host_stop,
};
static const struct ata_port_operations nv_adma_ops = {
.tf_load = ata_tf_load,
.tf_read = nv_adma_tf_read,
static struct ata_port_operations nv_adma_ops = {
.inherits = &nv_generic_ops,
.check_atapi_dma = nv_adma_check_atapi_dma,
.exec_command = ata_exec_command,
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.sff_tf_read = nv_adma_tf_read,
.qc_defer = ata_std_qc_defer,
.qc_prep = nv_adma_qc_prep,
.qc_issue = nv_adma_qc_issue,
.sff_irq_clear = nv_adma_irq_clear,
.freeze = nv_adma_freeze,
.thaw = nv_adma_thaw,
.error_handler = nv_adma_error_handler,
.post_internal_cmd = nv_adma_post_internal_cmd,
.data_xfer = ata_data_xfer,
.irq_clear = nv_adma_irq_clear,
.irq_on = ata_irq_on,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
.port_start = nv_adma_port_start,
.port_stop = nv_adma_port_stop,
#ifdef CONFIG_PM
@ -545,28 +449,17 @@ static const struct ata_port_operations nv_adma_ops = {
.host_stop = nv_adma_host_stop,
};
static const struct ata_port_operations nv_swncq_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.exec_command = ata_exec_command,
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
static struct ata_port_operations nv_swncq_ops = {
.inherits = &nv_generic_ops,
.qc_defer = ata_std_qc_defer,
.qc_prep = nv_swncq_qc_prep,
.qc_issue = nv_swncq_qc_issue,
.freeze = nv_mcp55_freeze,
.thaw = nv_mcp55_thaw,
.error_handler = nv_swncq_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.data_xfer = ata_data_xfer,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.scr_read = nv_scr_read,
.scr_write = nv_scr_write,
#ifdef CONFIG_PM
.port_suspend = nv_swncq_port_suspend,
.port_resume = nv_swncq_port_resume,
@ -574,63 +467,61 @@ static const struct ata_port_operations nv_swncq_ops = {
.port_start = nv_swncq_port_start,
};
struct nv_pi_priv {
irq_handler_t irq_handler;
struct scsi_host_template *sht;
};
#define NV_PI_PRIV(_irq_handler, _sht) \
&(struct nv_pi_priv){ .irq_handler = _irq_handler, .sht = _sht }
static const struct ata_port_info nv_port_info[] = {
/* generic */
{
.sht = &nv_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
.link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_generic_ops,
.irq_handler = nv_generic_interrupt,
.private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht),
},
/* nforce2/3 */
{
.sht = &nv_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
.link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_nf2_ops,
.irq_handler = nv_nf2_interrupt,
.private_data = NV_PI_PRIV(nv_nf2_interrupt, &nv_sht),
},
/* ck804 */
{
.sht = &nv_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
.link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_ck804_ops,
.irq_handler = nv_ck804_interrupt,
.private_data = NV_PI_PRIV(nv_ck804_interrupt, &nv_sht),
},
/* ADMA */
{
.sht = &nv_adma_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_NCQ,
.link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_adma_ops,
.irq_handler = nv_adma_interrupt,
.private_data = NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht),
},
/* SWNCQ */
{
.sht = &nv_swncq_sht,
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_NCQ,
.link_flags = ATA_LFLAG_HRST_TO_RESUME,
.pio_mask = NV_PIO_MASK,
.mwdma_mask = NV_MWDMA_MASK,
.udma_mask = NV_UDMA_MASK,
.port_ops = &nv_swncq_ops,
.irq_handler = nv_swncq_interrupt,
.private_data = NV_PI_PRIV(nv_swncq_interrupt, &nv_swncq_sht),
},
};
@ -640,8 +531,8 @@ MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
static int adma_enabled = 1;
static int swncq_enabled;
static int adma_enabled;
static int swncq_enabled = 1;
static void nv_adma_register_mode(struct ata_port *ap)
{
@ -839,7 +730,7 @@ static void nv_adma_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
ADMA mode could abort outstanding commands. */
nv_adma_register_mode(ap);
ata_tf_read(ap, tf);
ata_sff_tf_read(ap, tf);
}
static unsigned int nv_adma_tf_to_cpb(struct ata_taskfile *tf, __le16 *cpb)
@ -929,7 +820,7 @@ static int nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err)
"notifier for tag %d with no cmd?\n",
cpb_num);
ehi->err_mask |= AC_ERR_HSM;
ehi->action |= ATA_EH_SOFTRESET;
ehi->action |= ATA_EH_RESET;
ata_port_freeze(ap);
return 1;
}
@ -953,12 +844,12 @@ static int nv_host_intr(struct ata_port *ap, u8 irq_stat)
/* DEV interrupt w/ no active qc? */
if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
ata_check_status(ap);
ata_sff_check_status(ap);
return 1;
}
/* handle interrupt */
return ata_host_intr(ap, qc);
return ata_sff_host_intr(ap, qc);
}
static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
@ -1137,7 +1028,7 @@ static void nv_adma_irq_clear(struct ata_port *ap)
u32 notifier_clears[2];
if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
ata_bmdma_irq_clear(ap);
ata_sff_irq_clear(ap);
return;
}
@ -1168,7 +1059,7 @@ static void nv_adma_post_internal_cmd(struct ata_queued_cmd *qc)
struct nv_adma_port_priv *pp = qc->ap->private_data;
if (pp->flags & NV_ADMA_PORT_REGISTER_MODE)
ata_bmdma_post_internal_cmd(qc);
ata_sff_post_internal_cmd(qc);
}
static int nv_adma_port_start(struct ata_port *ap)
@ -1445,7 +1336,7 @@ static void nv_adma_qc_prep(struct ata_queued_cmd *qc)
BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
(qc->flags & ATA_QCFLAG_DMAMAP));
nv_adma_register_mode(qc->ap);
ata_qc_prep(qc);
ata_sff_qc_prep(qc);
return;
}
@ -1504,7 +1395,7 @@ static unsigned int nv_adma_qc_issue(struct ata_queued_cmd *qc)
BUG_ON(!(pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) &&
(qc->flags & ATA_QCFLAG_DMAMAP));
nv_adma_register_mode(qc->ap);
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
} else
nv_adma_mode(qc->ap);
@ -1545,11 +1436,11 @@ static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance)
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
handled += ata_host_intr(ap, qc);
handled += ata_sff_host_intr(ap, qc);
else
// No request pending? Clear interrupt status
// anyway, in case there's one pending.
ap->ops->check_status(ap);
ap->ops->sff_check_status(ap);
}
}
@ -1680,7 +1571,7 @@ static void nv_mcp55_freeze(struct ata_port *ap)
mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
mask &= ~(NV_INT_ALL_MCP55 << shift);
writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
ata_bmdma_freeze(ap);
ata_sff_freeze(ap);
}
static void nv_mcp55_thaw(struct ata_port *ap)
@ -1694,7 +1585,7 @@ static void nv_mcp55_thaw(struct ata_port *ap)
mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
mask |= (NV_INT_MASK_MCP55 << shift);
writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
ata_bmdma_thaw(ap);
ata_sff_thaw(ap);
}
static int nv_hardreset(struct ata_link *link, unsigned int *class,
@ -1706,13 +1597,7 @@ static int nv_hardreset(struct ata_link *link, unsigned int *class,
* some controllers. Don't classify on hardreset. For more
* info, see http://bugzilla.kernel.org/show_bug.cgi?id=3352
*/
return sata_std_hardreset(link, &dummy, deadline);
}
static void nv_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
nv_hardreset, ata_std_postreset);
return sata_sff_hardreset(link, &dummy, deadline);
}
static void nv_adma_error_handler(struct ata_port *ap)
@ -1768,8 +1653,7 @@ static void nv_adma_error_handler(struct ata_port *ap)
readw(mmio + NV_ADMA_CTL); /* flush posted write */
}
ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
nv_hardreset, ata_std_postreset);
ata_sff_error_handler(ap);
}
static void nv_swncq_qc_to_dq(struct ata_port *ap, struct ata_queued_cmd *qc)
@ -1855,7 +1739,7 @@ static void nv_swncq_ncq_stop(struct ata_port *ap)
pp->dhfis_bits, pp->dmafis_bits, pp->sdbfis_bits);
ata_port_printk(ap, KERN_ERR, "ATA_REG 0x%X ERR_REG 0x%X\n",
ap->ops->check_status(ap),
ap->ops->sff_check_status(ap),
ioread8(ap->ioaddr.error_addr));
sactive = readl(pp->sactive_block);
@ -1881,7 +1765,7 @@ static void nv_swncq_ncq_stop(struct ata_port *ap)
}
nv_swncq_pp_reinit(ap);
ap->ops->irq_clear(ap);
ap->ops->sff_irq_clear(ap);
__ata_bmdma_stop(ap);
nv_swncq_irq_clear(ap, 0xffff);
}
@ -1892,11 +1776,10 @@ static void nv_swncq_error_handler(struct ata_port *ap)
if (ap->link.sactive) {
nv_swncq_ncq_stop(ap);
ehc->i.action |= ATA_EH_HARDRESET;
ehc->i.action |= ATA_EH_RESET;
}
ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,
nv_hardreset, ata_std_postreset);
ata_sff_error_handler(ap);
}
#ifdef CONFIG_PM
@ -2042,7 +1925,7 @@ static int nv_swncq_port_start(struct ata_port *ap)
static void nv_swncq_qc_prep(struct ata_queued_cmd *qc)
{
if (qc->tf.protocol != ATA_PROT_NCQ) {
ata_qc_prep(qc);
ata_sff_qc_prep(qc);
return;
}
@ -2104,8 +1987,8 @@ static unsigned int nv_swncq_issue_atacmd(struct ata_port *ap,
pp->dmafis_bits &= ~(1 << qc->tag);
pp->qc_active |= (0x1 << qc->tag);
ap->ops->tf_load(ap, &qc->tf); /* load tf registers */
ap->ops->exec_command(ap, &qc->tf);
ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */
ap->ops->sff_exec_command(ap, &qc->tf);
DPRINTK("Issued tag %u\n", qc->tag);
@ -2118,7 +2001,7 @@ static unsigned int nv_swncq_qc_issue(struct ata_queued_cmd *qc)
struct nv_swncq_port_priv *pp = ap->private_data;
if (qc->tf.protocol != ATA_PROT_NCQ)
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
DPRINTK("Enter\n");
@ -2173,11 +2056,11 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
ata_ehi_clear_desc(ehi);
ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
ehi->err_mask |= AC_ERR_HOST_BUS;
ehi->action |= ATA_EH_SOFTRESET;
ehi->action |= ATA_EH_RESET;
return -EINVAL;
}
ap->ops->irq_clear(ap);
ap->ops->sff_irq_clear(ap);
__ata_bmdma_stop(ap);
sactive = readl(pp->sactive_block);
@ -2188,7 +2071,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
ata_ehi_push_desc(ehi, "illegal SWNCQ:qc_active transition"
"(%08x->%08x)", pp->qc_active, sactive);
ehi->err_mask |= AC_ERR_HSM;
ehi->action |= ATA_EH_HARDRESET;
ehi->action |= ATA_EH_RESET;
return -EINVAL;
}
for (i = 0; i < ATA_MAX_QUEUE; i++) {
@ -2299,7 +2182,7 @@ static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis)
u8 ata_stat;
int rc = 0;
ata_stat = ap->ops->check_status(ap);
ata_stat = ap->ops->sff_check_status(ap);
nv_swncq_irq_clear(ap, fis);
if (!fis)
return;
@ -2324,7 +2207,7 @@ static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis)
ata_ehi_push_desc(ehi, "Ata error. fis:0x%X", fis);
ehi->err_mask |= AC_ERR_DEV;
ehi->serror |= serror;
ehi->action |= ATA_EH_SOFTRESET;
ehi->action |= ATA_EH_RESET;
ata_port_freeze(ap);
return;
}
@ -2356,13 +2239,13 @@ static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis)
if (pp->ncq_flags & (ncq_saw_sdb | ncq_saw_backout)) {
ata_ehi_push_desc(ehi, "illegal fis transaction");
ehi->err_mask |= AC_ERR_HSM;
ehi->action |= ATA_EH_HARDRESET;
ehi->action |= ATA_EH_RESET;
goto irq_error;
}
if (!(fis & NV_SWNCQ_IRQ_DMASETUP) &&
!(pp->ncq_flags & ncq_saw_dmas)) {
ata_stat = ap->ops->check_status(ap);
ata_stat = ap->ops->sff_check_status(ap);
if (ata_stat & ATA_BUSY)
goto irq_exit;
@ -2429,6 +2312,7 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
const struct ata_port_info *ppi[] = { NULL, NULL };
struct nv_pi_priv *ipriv;
struct ata_host *host;
struct nv_host_priv *hpriv;
int rc;
@ -2465,7 +2349,8 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
}
ppi[0] = &nv_port_info[type];
rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
ipriv = ppi[0]->private_data;
rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
@ -2503,8 +2388,8 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
nv_swncq_host_init(host);
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ppi[0]->irq_handler,
IRQF_SHARED, ppi[0]->sht);
return ata_host_activate(host, pdev->irq, ipriv->irq_handler,
IRQF_SHARED, ipriv->sht);
}
#ifdef CONFIG_PM
@ -2600,5 +2485,5 @@ module_exit(nv_exit);
module_param_named(adma, adma_enabled, bool, 0444);
MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)");
module_param_named(swncq, swncq_enabled, bool, 0444);
MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: false)");
MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");

118
drivers/ata/sata_promise.c
Просмотреть файл

@ -143,103 +143,57 @@ static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile
static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
static int pdc_old_sata_check_atapi_dma(struct ata_queued_cmd *qc);
static void pdc_irq_clear(struct ata_port *ap);
static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
static unsigned int pdc_qc_issue(struct ata_queued_cmd *qc);
static void pdc_freeze(struct ata_port *ap);
static void pdc_sata_freeze(struct ata_port *ap);
static void pdc_thaw(struct ata_port *ap);
static void pdc_sata_thaw(struct ata_port *ap);
static void pdc_pata_error_handler(struct ata_port *ap);
static void pdc_sata_error_handler(struct ata_port *ap);
static void pdc_error_handler(struct ata_port *ap);
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
static int pdc_pata_cable_detect(struct ata_port *ap);
static int pdc_sata_cable_detect(struct ata_port *ap);
static struct scsi_host_template pdc_ata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = PDC_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
static const struct ata_port_operations pdc_sata_ops = {
.tf_load = pdc_tf_load_mmio,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = pdc_exec_command_mmio,
.dev_select = ata_std_dev_select,
.check_atapi_dma = pdc_check_atapi_dma,
static const struct ata_port_operations pdc_common_ops = {
.inherits = &ata_sff_port_ops,
.sff_tf_load = pdc_tf_load_mmio,
.sff_exec_command = pdc_exec_command_mmio,
.check_atapi_dma = pdc_check_atapi_dma,
.qc_prep = pdc_qc_prep,
.qc_issue = pdc_qc_issue_prot,
.qc_issue = pdc_qc_issue,
.sff_irq_clear = pdc_irq_clear,
.post_internal_cmd = pdc_post_internal_cmd,
.error_handler = pdc_error_handler,
};
static struct ata_port_operations pdc_sata_ops = {
.inherits = &pdc_common_ops,
.cable_detect = pdc_sata_cable_detect,
.freeze = pdc_sata_freeze,
.thaw = pdc_sata_thaw,
.error_handler = pdc_sata_error_handler,
.post_internal_cmd = pdc_post_internal_cmd,
.cable_detect = pdc_sata_cable_detect,
.data_xfer = ata_data_xfer,
.irq_clear = pdc_irq_clear,
.irq_on = ata_irq_on,
.scr_read = pdc_sata_scr_read,
.scr_write = pdc_sata_scr_write,
.port_start = pdc_sata_port_start,
};
/* First-generation chips need a more restrictive ->check_atapi_dma op */
static const struct ata_port_operations pdc_old_sata_ops = {
.tf_load = pdc_tf_load_mmio,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = pdc_exec_command_mmio,
.dev_select = ata_std_dev_select,
static struct ata_port_operations pdc_old_sata_ops = {
.inherits = &pdc_sata_ops,
.check_atapi_dma = pdc_old_sata_check_atapi_dma,
.qc_prep = pdc_qc_prep,
.qc_issue = pdc_qc_issue_prot,
.freeze = pdc_sata_freeze,
.thaw = pdc_sata_thaw,
.error_handler = pdc_sata_error_handler,
.post_internal_cmd = pdc_post_internal_cmd,
.cable_detect = pdc_sata_cable_detect,
.data_xfer = ata_data_xfer,
.irq_clear = pdc_irq_clear,
.irq_on = ata_irq_on,
.scr_read = pdc_sata_scr_read,
.scr_write = pdc_sata_scr_write,
.port_start = pdc_sata_port_start,
};
static const struct ata_port_operations pdc_pata_ops = {
.tf_load = pdc_tf_load_mmio,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = pdc_exec_command_mmio,
.dev_select = ata_std_dev_select,
.check_atapi_dma = pdc_check_atapi_dma,
.qc_prep = pdc_qc_prep,
.qc_issue = pdc_qc_issue_prot,
static struct ata_port_operations pdc_pata_ops = {
.inherits = &pdc_common_ops,
.cable_detect = pdc_pata_cable_detect,
.freeze = pdc_freeze,
.thaw = pdc_thaw,
.error_handler = pdc_pata_error_handler,
.post_internal_cmd = pdc_post_internal_cmd,
.cable_detect = pdc_pata_cable_detect,
.data_xfer = ata_data_xfer,
.irq_clear = pdc_irq_clear,
.irq_on = ata_irq_on,
.port_start = pdc_common_port_start,
};
@ -451,7 +405,7 @@ static void pdc_atapi_pkt(struct ata_queued_cmd *qc)
u8 *cdb = qc->cdb;
struct pdc_port_priv *pp = ap->private_data;
u8 *buf = pp->pkt;
u32 *buf32 = (u32 *) buf;
__le32 *buf32 = (__le32 *) buf;
unsigned int dev_sel, feature;
/* set control bits (byte 0), zero delay seq id (byte 3),
@ -738,24 +692,12 @@ static void pdc_sata_thaw(struct ata_port *ap)
readl(host_mmio + hotplug_offset); /* flush */
}
static void pdc_common_error_handler(struct ata_port *ap, ata_reset_fn_t hardreset)
static void pdc_error_handler(struct ata_port *ap)
{
if (!(ap->pflags & ATA_PFLAG_FROZEN))
pdc_reset_port(ap);
/* perform recovery */
ata_do_eh(ap, ata_std_prereset, ata_std_softreset, hardreset,
ata_std_postreset);
}
static void pdc_pata_error_handler(struct ata_port *ap)
{
pdc_common_error_handler(ap, NULL);
}
static void pdc_sata_error_handler(struct ata_port *ap)
{
pdc_common_error_handler(ap, sata_std_hardreset);
ata_std_error_handler(ap);
}
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
@ -952,7 +894,7 @@ static inline void pdc_packet_start(struct ata_queued_cmd *qc)
readl(ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */
}
static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
static unsigned int pdc_qc_issue(struct ata_queued_cmd *qc)
{
switch (qc->tf.protocol) {
case ATAPI_PROT_NODATA:
@ -972,20 +914,20 @@ static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
break;
}
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA);
ata_tf_load(ap, tf);
ata_sff_tf_load(ap, tf);
}
static void pdc_exec_command_mmio(struct ata_port *ap,
const struct ata_taskfile *tf)
{
WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA);
ata_exec_command(ap, tf);
ata_sff_exec_command(ap, tf);
}
static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)

70
drivers/ata/sata_qstor.c
Просмотреть файл

@ -121,50 +121,38 @@ static unsigned int qs_qc_issue(struct ata_queued_cmd *qc);
static int qs_check_atapi_dma(struct ata_queued_cmd *qc);
static void qs_bmdma_stop(struct ata_queued_cmd *qc);
static u8 qs_bmdma_status(struct ata_port *ap);
static void qs_irq_clear(struct ata_port *ap);
static void qs_freeze(struct ata_port *ap);
static void qs_thaw(struct ata_port *ap);
static int qs_prereset(struct ata_link *link, unsigned long deadline);
static void qs_error_handler(struct ata_port *ap);
static struct scsi_host_template qs_ata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = QS_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ENABLE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = QS_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
static const struct ata_port_operations qs_ata_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
static struct ata_port_operations qs_ata_ops = {
.inherits = &ata_sff_port_ops,
.check_atapi_dma = qs_check_atapi_dma,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.qc_prep = qs_qc_prep,
.qc_issue = qs_qc_issue,
.data_xfer = ata_data_xfer,
.freeze = qs_freeze,
.thaw = qs_thaw,
.error_handler = qs_error_handler,
.irq_clear = qs_irq_clear,
.irq_on = ata_irq_on,
.scr_read = qs_scr_read,
.scr_write = qs_scr_write,
.port_start = qs_port_start,
.host_stop = qs_host_stop,
.bmdma_stop = qs_bmdma_stop,
.bmdma_status = qs_bmdma_status,
.qc_prep = qs_qc_prep,
.qc_issue = qs_qc_issue,
.freeze = qs_freeze,
.thaw = qs_thaw,
.prereset = qs_prereset,
.softreset = ATA_OP_NULL,
.error_handler = qs_error_handler,
.post_internal_cmd = ATA_OP_NULL,
.scr_read = qs_scr_read,
.scr_write = qs_scr_write,
.port_start = qs_port_start,
.host_stop = qs_host_stop,
};
static const struct ata_port_info qs_port_info[] = {
@ -211,11 +199,6 @@ static u8 qs_bmdma_status(struct ata_port *ap)
return 0;
}
static void qs_irq_clear(struct ata_port *ap)
{
/* nothing */
}
static inline void qs_enter_reg_mode(struct ata_port *ap)
{
u8 __iomem *chan = qs_mmio_base(ap->host) + (ap->port_no * 0x4000);
@ -256,7 +239,7 @@ static int qs_prereset(struct ata_link *link, unsigned long deadline)
struct ata_port *ap = link->ap;
qs_reset_channel_logic(ap);
return ata_std_prereset(link, deadline);
return ata_sff_prereset(link, deadline);
}
static int qs_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
@ -270,8 +253,7 @@ static int qs_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
static void qs_error_handler(struct ata_port *ap)
{
qs_enter_reg_mode(ap);
ata_do_eh(ap, qs_prereset, NULL, sata_std_hardreset,
ata_std_postreset);
ata_std_error_handler(ap);
}
static int qs_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
@ -321,7 +303,7 @@ static void qs_qc_prep(struct ata_queued_cmd *qc)
qs_enter_reg_mode(qc->ap);
if (qc->tf.protocol != ATA_PROT_DMA) {
ata_qc_prep(qc);
ata_sff_qc_prep(qc);
return;
}
@ -380,7 +362,7 @@ static unsigned int qs_qc_issue(struct ata_queued_cmd *qc)
}
pp->state = qs_state_mmio;
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
static void qs_do_or_die(struct ata_queued_cmd *qc, u8 status)
@ -469,7 +451,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host *host)
* and pretend we knew it was ours.. (ugh).
* This does not affect packet mode.
*/
ata_check_status(ap);
ata_sff_check_status(ap);
handled = 1;
continue;
}
@ -477,7 +459,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host *host)
if (!pp || pp->state != qs_state_mmio)
continue;
if (!(qc->tf.flags & ATA_TFLAG_POLLING))
handled |= ata_host_intr(ap, qc);
handled |= ata_sff_host_intr(ap, qc);
}
}
return handled;

55
drivers/ata/sata_sil.c
Просмотреть файл

@ -60,7 +60,6 @@ enum {
SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO,
SIL_DFL_LINK_FLAGS = ATA_LFLAG_HRST_TO_RESUME,
/*
* Controller IDs
@ -168,54 +167,23 @@ static struct pci_driver sil_pci_driver = {
};
static struct scsi_host_template sil_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations sil_ops = {
static struct ata_port_operations sil_ops = {
.inherits = &ata_bmdma_port_ops,
.dev_config = sil_dev_config,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.set_mode = sil_set_mode,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.freeze = sil_freeze,
.thaw = sil_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.scr_read = sil_scr_read,
.scr_write = sil_scr_write,
.port_start = ata_port_start,
};
static const struct ata_port_info sil_port_info[] = {
/* sil_3112 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE,
.link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@ -225,7 +193,6 @@ static const struct ata_port_info sil_port_info[] = {
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
SIL_FLAG_NO_SATA_IRQ,
.link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@ -234,7 +201,6 @@ static const struct ata_port_info sil_port_info[] = {
/* sil_3512 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
.link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@ -243,7 +209,6 @@ static const struct ata_port_info sil_port_info[] = {
/* sil_3114 */
{
.flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
.link_flags = SIL_DFL_LINK_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5,
@ -404,7 +369,7 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
/* this sometimes happens, just clear IRQ */
ata_chk_status(ap);
ap->ops->sff_check_status(ap);
return;
}
@ -440,15 +405,15 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
}
/* check main status, clearing INTRQ */
status = ata_chk_status(ap);
status = ap->ops->sff_check_status(ap);
if (unlikely(status & ATA_BUSY))
goto err_hsm;
/* ack bmdma irq events */
ata_bmdma_irq_clear(ap);
ata_sff_irq_clear(ap);
/* kick HSM in the ass */
ata_hsm_move(ap, qc, status, 0);
ata_sff_hsm_move(ap, qc, status, 0);
if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol))
ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2);
@ -515,8 +480,8 @@ static void sil_thaw(struct ata_port *ap)
u32 tmp;
/* clear IRQ */
ata_chk_status(ap);
ata_bmdma_irq_clear(ap);
ap->ops->sff_check_status(ap);
ata_sff_irq_clear(ap);
/* turn on SATA IRQ if supported */
if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
@ -690,7 +655,7 @@ static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
ioaddr->ctl_addr = mmio_base + sil_port[i].ctl;
ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma;
ioaddr->scr_addr = mmio_base + sil_port[i].scr;
ata_std_ports(ioaddr);
ata_sff_std_ports(ioaddr);
ata_port_pbar_desc(ap, SIL_MMIO_BAR, -1, "mmio");
ata_port_pbar_desc(ap, SIL_MMIO_BAR, sil_port[i].tf, "tf");

249
drivers/ata/sata_sil24.c
Просмотреть файл

@ -254,7 +254,6 @@ enum {
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
ATA_FLAG_AN | ATA_FLAG_PMP,
SIL24_COMMON_LFLAGS = ATA_LFLAG_SKIP_D2H_BSY,
SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
IRQ_STAT_4PORTS = 0xf,
@ -286,45 +285,45 @@ static struct sil24_cerr_info {
"device error via D2H FIS" },
[PORT_CERR_SDB] = { AC_ERR_DEV, 0,
"device error via SDB FIS" },
[PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
[PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_RESET,
"error in data FIS" },
[PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
[PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_RESET,
"failed to transmit command FIS" },
[PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
[PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_RESET,
"protocol mismatch" },
[PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
[PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_RESET,
"data directon mismatch" },
[PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
[PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_RESET,
"ran out of SGEs while writing" },
[PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
[PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_RESET,
"ran out of SGEs while reading" },
[PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
[PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_RESET,
"invalid data directon for ATAPI CDB" },
[PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
[PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
"SGT not on qword boundary" },
[PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
[PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI target abort while fetching SGT" },
[PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
[PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI master abort while fetching SGT" },
[PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
[PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI parity error while fetching SGT" },
[PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
[PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
"PRB not on qword boundary" },
[PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
[PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI target abort while fetching PRB" },
[PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
[PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI master abort while fetching PRB" },
[PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
[PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI parity error while fetching PRB" },
[PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
[PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"undefined error while transferring data" },
[PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
[PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI target abort while transferring data" },
[PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
[PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI master abort while transferring data" },
[PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
[PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
"PCI parity error while transferring data" },
[PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
[PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_RESET,
"FIS received while sending service FIS" },
};
@ -337,23 +336,26 @@ static struct sil24_cerr_info {
struct sil24_port_priv {
union sil24_cmd_block *cmd_block; /* 32 cmd blocks */
dma_addr_t cmd_block_dma; /* DMA base addr for them */
struct ata_taskfile tf; /* Cached taskfile registers */
int do_port_rst;
};
static void sil24_dev_config(struct ata_device *dev);
static u8 sil24_check_status(struct ata_port *ap);
static int sil24_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val);
static int sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
static int sil24_qc_defer(struct ata_queued_cmd *qc);
static void sil24_qc_prep(struct ata_queued_cmd *qc);
static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
static void sil24_irq_clear(struct ata_port *ap);
static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc);
static void sil24_pmp_attach(struct ata_port *ap);
static void sil24_pmp_detach(struct ata_port *ap);
static void sil24_freeze(struct ata_port *ap);
static void sil24_thaw(struct ata_port *ap);
static int sil24_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static int sil24_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static void sil24_error_handler(struct ata_port *ap);
static void sil24_post_internal_cmd(struct ata_queued_cmd *qc);
static int sil24_port_start(struct ata_port *ap);
@ -386,52 +388,36 @@ static struct pci_driver sil24_pci_driver = {
};
static struct scsi_host_template sil24_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.change_queue_depth = ata_scsi_change_queue_depth,
ATA_NCQ_SHT(DRV_NAME),
.can_queue = SIL24_MAX_CMDS,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = SIL24_MAX_SGE,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
static const struct ata_port_operations sil24_ops = {
.dev_config = sil24_dev_config,
.check_status = sil24_check_status,
.check_altstatus = sil24_check_status,
.dev_select = ata_noop_dev_select,
.tf_read = sil24_tf_read,
static struct ata_port_operations sil24_ops = {
.inherits = &sata_pmp_port_ops,
.qc_defer = sil24_qc_defer,
.qc_prep = sil24_qc_prep,
.qc_issue = sil24_qc_issue,
.irq_clear = sil24_irq_clear,
.scr_read = sil24_scr_read,
.scr_write = sil24_scr_write,
.pmp_attach = sil24_pmp_attach,
.pmp_detach = sil24_pmp_detach,
.qc_fill_rtf = sil24_qc_fill_rtf,
.freeze = sil24_freeze,
.thaw = sil24_thaw,
.softreset = sil24_softreset,
.hardreset = sil24_hardreset,
.pmp_softreset = sil24_softreset,
.pmp_hardreset = sil24_pmp_hardreset,
.error_handler = sil24_error_handler,
.post_internal_cmd = sil24_post_internal_cmd,
.dev_config = sil24_dev_config,
.scr_read = sil24_scr_read,
.scr_write = sil24_scr_write,
.pmp_attach = sil24_pmp_attach,
.pmp_detach = sil24_pmp_detach,
.port_start = sil24_port_start,
#ifdef CONFIG_PM
.port_resume = sil24_port_resume,
#endif
@ -449,7 +435,6 @@ static const struct ata_port_info sil24_port_info[] = {
{
.flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
SIL24_FLAG_PCIX_IRQ_WOC,
.link_flags = SIL24_COMMON_LFLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5, /* udma0-5 */
@ -458,7 +443,6 @@ static const struct ata_port_info sil24_port_info[] = {
/* sil_3132 */
{
.flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
.link_flags = SIL24_COMMON_LFLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5, /* udma0-5 */
@ -467,7 +451,6 @@ static const struct ata_port_info sil24_port_info[] = {
/* sil_3131/sil_3531 */
{
.flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
.link_flags = SIL24_COMMON_LFLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA5, /* udma0-5 */
@ -482,9 +465,19 @@ static int sil24_tag(int tag)
return tag;
}
static unsigned long sil24_port_offset(struct ata_port *ap)
{
return ap->port_no * PORT_REGS_SIZE;
}
static void __iomem *sil24_port_base(struct ata_port *ap)
{
return ap->host->iomap[SIL24_PORT_BAR] + sil24_port_offset(ap);
}
static void sil24_dev_config(struct ata_device *dev)
{
void __iomem *port = dev->link->ap->ioaddr.cmd_addr;
void __iomem *port = sil24_port_base(dev->link->ap);
if (dev->cdb_len == 16)
writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
@ -494,7 +487,7 @@ static void sil24_dev_config(struct ata_device *dev)
static void sil24_read_tf(struct ata_port *ap, int tag, struct ata_taskfile *tf)
{
void __iomem *port = ap->ioaddr.cmd_addr;
void __iomem *port = sil24_port_base(ap);
struct sil24_prb __iomem *prb;
u8 fis[6 * 4];
@ -503,12 +496,6 @@ static void sil24_read_tf(struct ata_port *ap, int tag, struct ata_taskfile *tf)
ata_tf_from_fis(fis, tf);
}
static u8 sil24_check_status(struct ata_port *ap)
{
struct sil24_port_priv *pp = ap->private_data;
return pp->tf.command;
}
static int sil24_scr_map[] = {
[SCR_CONTROL] = 0,
[SCR_STATUS] = 1,
@ -518,7 +505,7 @@ static int sil24_scr_map[] = {
static int sil24_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val)
{
void __iomem *scr_addr = ap->ioaddr.scr_addr;
void __iomem *scr_addr = sil24_port_base(ap) + PORT_SCONTROL;
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
void __iomem *addr;
@ -531,7 +518,7 @@ static int sil24_scr_read(struct ata_port *ap, unsigned sc_reg, u32 *val)
static int sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
{
void __iomem *scr_addr = ap->ioaddr.scr_addr;
void __iomem *scr_addr = sil24_port_base(ap) + PORT_SCONTROL;
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
void __iomem *addr;
@ -542,15 +529,9 @@ static int sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
return -EINVAL;
}
static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct sil24_port_priv *pp = ap->private_data;
*tf = pp->tf;
}
static void sil24_config_port(struct ata_port *ap)
{
void __iomem *port = ap->ioaddr.cmd_addr;
void __iomem *port = sil24_port_base(ap);
/* configure IRQ WoC */
if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
@ -575,7 +556,7 @@ static void sil24_config_port(struct ata_port *ap)
static void sil24_config_pmp(struct ata_port *ap, int attached)
{
void __iomem *port = ap->ioaddr.cmd_addr;
void __iomem *port = sil24_port_base(ap);
if (attached)
writel(PORT_CS_PMP_EN, port + PORT_CTRL_STAT);
@ -585,7 +566,7 @@ static void sil24_config_pmp(struct ata_port *ap, int attached)
static void sil24_clear_pmp(struct ata_port *ap)
{
void __iomem *port = ap->ioaddr.cmd_addr;
void __iomem *port = sil24_port_base(ap);
int i;
writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
@ -600,12 +581,12 @@ static void sil24_clear_pmp(struct ata_port *ap)
static int sil24_init_port(struct ata_port *ap)
{
void __iomem *port = ap->ioaddr.cmd_addr;
void __iomem *port = sil24_port_base(ap);
struct sil24_port_priv *pp = ap->private_data;
u32 tmp;
/* clear PMP error status */
if (ap->nr_pmp_links)
if (sata_pmp_attached(ap))
sil24_clear_pmp(ap);
writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
@ -616,7 +597,7 @@ static int sil24_init_port(struct ata_port *ap)
if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) {
pp->do_port_rst = 1;
ap->link.eh_context.i.action |= ATA_EH_HARDRESET;
ap->link.eh_context.i.action |= ATA_EH_RESET;
return -EIO;
}
@ -628,7 +609,7 @@ static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
int is_cmd, u32 ctrl,
unsigned long timeout_msec)
{
void __iomem *port = ap->ioaddr.cmd_addr;
void __iomem *port = sil24_port_base(ap);
struct sil24_port_priv *pp = ap->private_data;
struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
dma_addr_t paddr = pp->cmd_block_dma;
@ -670,10 +651,11 @@ static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
return rc;
}
static int sil24_do_softreset(struct ata_link *link, unsigned int *class,
int pmp, unsigned long deadline)
static int sil24_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
int pmp = sata_srst_pmp(link);
unsigned long timeout_msec = 0;
struct ata_taskfile tf;
const char *reason;
@ -681,12 +663,6 @@ static int sil24_do_softreset(struct ata_link *link, unsigned int *class,
DPRINTK("ENTER\n");
if (ata_link_offline(link)) {
DPRINTK("PHY reports no device\n");
*class = ATA_DEV_NONE;
goto out;
}
/* put the port into known state */
if (sil24_init_port(ap)) {
reason = "port not ready";
@ -711,10 +687,6 @@ static int sil24_do_softreset(struct ata_link *link, unsigned int *class,
sil24_read_tf(ap, 0, &tf);
*class = ata_dev_classify(&tf);
if (*class == ATA_DEV_UNKNOWN)
*class = ATA_DEV_NONE;
out:
DPRINTK("EXIT, class=%u\n", *class);
return 0;
@ -723,17 +695,11 @@ static int sil24_do_softreset(struct ata_link *link, unsigned int *class,
return -EIO;
}
static int sil24_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
return sil24_do_softreset(link, class, SATA_PMP_CTRL_PORT, deadline);
}
static int sil24_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
void __iomem *port = ap->ioaddr.cmd_addr;
void __iomem *port = sil24_port_base(ap);
struct sil24_port_priv *pp = ap->private_data;
int did_port_rst = 0;
const char *reason;
@ -911,7 +877,7 @@ static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct sil24_port_priv *pp = ap->private_data;
void __iomem *port = ap->ioaddr.cmd_addr;
void __iomem *port = sil24_port_base(ap);
unsigned int tag = sil24_tag(qc->tag);
dma_addr_t paddr;
void __iomem *activate;
@ -925,9 +891,10 @@ static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
return 0;
}
static void sil24_irq_clear(struct ata_port *ap)
static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc)
{
/* unused */
sil24_read_tf(qc->ap, qc->tag, &qc->result_tf);
return true;
}
static void sil24_pmp_attach(struct ata_port *ap)
@ -942,12 +909,6 @@ static void sil24_pmp_detach(struct ata_port *ap)
sil24_config_pmp(ap, 0);
}
static int sil24_pmp_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
return sil24_do_softreset(link, class, link->pmp, deadline);
}
static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
@ -960,12 +921,12 @@ static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
return rc;
}
return sata_pmp_std_hardreset(link, class, deadline);
return sata_std_hardreset(link, class, deadline);
}
static void sil24_freeze(struct ata_port *ap)
{
void __iomem *port = ap->ioaddr.cmd_addr;
void __iomem *port = sil24_port_base(ap);
/* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
* PORT_IRQ_ENABLE instead.
@ -975,7 +936,7 @@ static void sil24_freeze(struct ata_port *ap)
static void sil24_thaw(struct ata_port *ap)
{
void __iomem *port = ap->ioaddr.cmd_addr;
void __iomem *port = sil24_port_base(ap);
u32 tmp;
/* clear IRQ */
@ -988,7 +949,7 @@ static void sil24_thaw(struct ata_port *ap)
static void sil24_error_intr(struct ata_port *ap)
{
void __iomem *port = ap->ioaddr.cmd_addr;
void __iomem *port = sil24_port_base(ap);
struct sil24_port_priv *pp = ap->private_data;
struct ata_queued_cmd *qc = NULL;
struct ata_link *link;
@ -1022,7 +983,7 @@ static void sil24_error_intr(struct ata_port *ap)
if (irq_stat & PORT_IRQ_UNK_FIS) {
ehi->err_mask |= AC_ERR_HSM;
ehi->action |= ATA_EH_SOFTRESET;
ehi->action |= ATA_EH_RESET;
ata_ehi_push_desc(ehi, "unknown FIS");
freeze = 1;
}
@ -1043,14 +1004,14 @@ static void sil24_error_intr(struct ata_port *ap)
*/
if (ap->nr_active_links >= 3) {
ehi->err_mask |= AC_ERR_OTHER;
ehi->action |= ATA_EH_HARDRESET;
ehi->action |= ATA_EH_RESET;
ata_ehi_push_desc(ehi, "PMP DMA CS errata");
pp->do_port_rst = 1;
freeze = 1;
}
/* find out the offending link and qc */
if (ap->nr_pmp_links) {
if (sata_pmp_attached(ap)) {
context = readl(port + PORT_CONTEXT);
pmp = (context >> 5) & 0xf;
@ -1064,7 +1025,7 @@ static void sil24_error_intr(struct ata_port *ap)
irq_stat);
} else {
err_mask |= AC_ERR_HSM;
action |= ATA_EH_HARDRESET;
action |= ATA_EH_RESET;
freeze = 1;
}
} else
@ -1078,28 +1039,27 @@ static void sil24_error_intr(struct ata_port *ap)
if (ci && ci->desc) {
err_mask |= ci->err_mask;
action |= ci->action;
if (action & ATA_EH_RESET_MASK)
if (action & ATA_EH_RESET)
freeze = 1;
ata_ehi_push_desc(ehi, "%s", ci->desc);
} else {
err_mask |= AC_ERR_OTHER;
action |= ATA_EH_SOFTRESET;
action |= ATA_EH_RESET;
freeze = 1;
ata_ehi_push_desc(ehi, "unknown command error %d",
cerr);
}
/* record error info */
if (qc) {
sil24_read_tf(ap, qc->tag, &pp->tf);
if (qc)
qc->err_mask |= err_mask;
} else
else
ehi->err_mask |= err_mask;
ehi->action |= action;
/* if PMP, resume */
if (ap->nr_pmp_links)
if (sata_pmp_attached(ap))
writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_STAT);
}
@ -1114,18 +1074,9 @@ static void sil24_error_intr(struct ata_port *ap)
}
}
static void sil24_finish_qc(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct sil24_port_priv *pp = ap->private_data;
if (qc->flags & ATA_QCFLAG_RESULT_TF)
sil24_read_tf(ap, qc->tag, &pp->tf);
}
static inline void sil24_host_intr(struct ata_port *ap)
{
void __iomem *port = ap->ioaddr.cmd_addr;
void __iomem *port = sil24_port_base(ap);
u32 slot_stat, qc_active;
int rc;
@ -1147,13 +1098,13 @@ static inline void sil24_host_intr(struct ata_port *ap)
}
qc_active = slot_stat & ~HOST_SSTAT_ATTN;
rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc);
rc = ata_qc_complete_multiple(ap, qc_active);
if (rc > 0)
return;
if (rc < 0) {
struct ata_eh_info *ehi = &ap->link.eh_info;
ehi->err_mask |= AC_ERR_HSM;
ehi->action |= ATA_EH_SOFTRESET;
ehi->action |= ATA_EH_RESET;
ata_port_freeze(ap);
return;
}
@ -1209,11 +1160,7 @@ static void sil24_error_handler(struct ata_port *ap)
if (sil24_init_port(ap))
ata_eh_freeze_port(ap);
/* perform recovery */
sata_pmp_do_eh(ap, ata_std_prereset, sil24_softreset, sil24_hardreset,
ata_std_postreset, sata_pmp_std_prereset,
sil24_pmp_softreset, sil24_pmp_hardreset,
sata_pmp_std_postreset);
sata_pmp_error_handler(ap);
pp->do_port_rst = 0;
}
@ -1239,8 +1186,6 @@ static int sil24_port_start(struct ata_port *ap)
if (!pp)
return -ENOMEM;
pp->tf.command = ATA_DRDY;
cb = dmam_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
if (!cb)
return -ENOMEM;
@ -1251,6 +1196,9 @@ static int sil24_port_start(struct ata_port *ap)
ap->private_data = pp;
ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host");
ata_port_pbar_desc(ap, SIL24_PORT_BAR, sil24_port_offset(ap), "port");
return 0;
}
@ -1269,7 +1217,8 @@ static void sil24_init_controller(struct ata_host *host)
/* init ports */
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
void __iomem *port = ap->ioaddr.cmd_addr;
void __iomem *port = sil24_port_base(ap);
/* Initial PHY setting */
writel(0x20c, port + PORT_PHY_CFG);
@ -1302,7 +1251,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
const struct ata_port_info *ppi[] = { &pi, NULL };
void __iomem * const *iomap;
struct ata_host *host;
int i, rc;
int rc;
u32 tmp;
/* cause link error if sil24_cmd_block is sized wrongly */
@ -1342,18 +1291,6 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
return -ENOMEM;
host->iomap = iomap;
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
size_t offset = ap->port_no * PORT_REGS_SIZE;
void __iomem *port = iomap[SIL24_PORT_BAR] + offset;
host->ports[i]->ioaddr.cmd_addr = port;
host->ports[i]->ioaddr.scr_addr = port + PORT_SCONTROL;
ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host");
ata_port_pbar_desc(ap, SIL24_PORT_BAR, offset, "port");
}
/* configure and activate the device */
if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);

44
drivers/ata/sata_sis.c
Просмотреть файл

@ -86,45 +86,13 @@ static struct pci_driver sis_pci_driver = {
};
static struct scsi_host_template sis_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations sis_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
static struct ata_port_operations sis_ops = {
.inherits = &ata_bmdma_port_ops,
.scr_read = sis_scr_read,
.scr_write = sis_scr_write,
.port_start = ata_port_start,
};
static const struct ata_port_info sis_port_info = {
@ -341,7 +309,7 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
break;
}
rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
@ -359,8 +327,8 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_set_master(pdev);
pci_intx(pdev, 1);
return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
&sis_sht);
return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
IRQF_SHARED, &sis_sht);
}
static int __init sis_init(void)

47
drivers/ata/sata_svw.c
Просмотреть файл

@ -233,7 +233,7 @@ static void k2_bmdma_setup_mmio(struct ata_queued_cmd *qc)
/* issue r/w command if this is not a ATA DMA command*/
if (qc->tf.protocol != ATA_PROT_DMA)
ap->ops->exec_command(ap, &qc->tf);
ap->ops->sff_exec_command(ap, &qc->tf);
}
/**
@ -269,7 +269,7 @@ static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc)
and the start command. */
/* issue r/w command if the access is to ATA*/
if (qc->tf.protocol == ATA_PROT_DMA)
ap->ops->exec_command(ap, &qc->tf);
ap->ops->sff_exec_command(ap, &qc->tf);
}
@ -327,50 +327,23 @@ static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start,
static struct scsi_host_template k2_sata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
ATA_BMDMA_SHT(DRV_NAME),
#ifdef CONFIG_PPC_OF
.proc_info = k2_sata_proc_info,
#endif
.bios_param = ata_std_bios_param,
};
static const struct ata_port_operations k2_sata_ops = {
.tf_load = k2_sata_tf_load,
.tf_read = k2_sata_tf_read,
.check_status = k2_stat_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
static struct ata_port_operations k2_sata_ops = {
.inherits = &ata_bmdma_port_ops,
.sff_tf_load = k2_sata_tf_load,
.sff_tf_read = k2_sata_tf_read,
.sff_check_status = k2_stat_check_status,
.check_atapi_dma = k2_sata_check_atapi_dma,
.bmdma_setup = k2_bmdma_setup_mmio,
.bmdma_start = k2_bmdma_start_mmio,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.scr_read = k2_sata_scr_read,
.scr_write = k2_sata_scr_write,
.port_start = ata_port_start,
};
static const struct ata_port_info k2_port_info[] = {
@ -519,8 +492,8 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
&k2_sata_sht);
return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
IRQF_SHARED, &k2_sata_sht);
}
/* 0x240 is device ID for Apple K2 device

52
drivers/ata/sata_sx4.c
Просмотреть файл

@ -232,40 +232,30 @@ static void pdc20621_get_from_dimm(struct ata_host *host,
static void pdc20621_put_to_dimm(struct ata_host *host,
void *psource, u32 offset, u32 size);
static void pdc20621_irq_clear(struct ata_port *ap);
static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc);
static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc);
static struct scsi_host_template pdc_sata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
ATA_BASE_SHT(DRV_NAME),
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
static const struct ata_port_operations pdc_20621_ops = {
.tf_load = pdc_tf_load_mmio,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = pdc_exec_command_mmio,
.dev_select = ata_std_dev_select,
/* TODO: inherit from base port_ops after converting to new EH */
static struct ata_port_operations pdc_20621_ops = {
.sff_tf_load = pdc_tf_load_mmio,
.sff_tf_read = ata_sff_tf_read,
.sff_check_status = ata_sff_check_status,
.sff_exec_command = pdc_exec_command_mmio,
.sff_dev_select = ata_sff_dev_select,
.phy_reset = pdc_20621_phy_reset,
.qc_prep = pdc20621_qc_prep,
.qc_issue = pdc20621_qc_issue_prot,
.data_xfer = ata_data_xfer,
.qc_issue = pdc20621_qc_issue,
.qc_fill_rtf = ata_sff_qc_fill_rtf,
.sff_data_xfer = ata_sff_data_xfer,
.eng_timeout = pdc_eng_timeout,
.irq_clear = pdc20621_irq_clear,
.irq_on = ata_irq_on,
.sff_irq_clear = pdc20621_irq_clear,
.sff_irq_on = ata_sff_irq_on,
.port_start = pdc_port_start,
};
@ -475,7 +465,7 @@ static void pdc20621_dma_prep(struct ata_queued_cmd *qc)
void __iomem *dimm_mmio = ap->host->iomap[PDC_DIMM_BAR];
unsigned int portno = ap->port_no;
unsigned int i, si, idx, total_len = 0, sgt_len;
u32 *buf = (u32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ];
__le32 *buf = (__le32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ];
WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP));
@ -693,7 +683,7 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc)
}
}
static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc)
static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc)
{
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
@ -709,7 +699,7 @@ static unsigned int pdc20621_qc_issue_prot(struct ata_queued_cmd *qc)
break;
}
return ata_qc_issue_prot(qc);
return ata_sff_qc_issue(qc);
}
static inline unsigned int pdc20621_host_intr(struct ata_port *ap,
@ -781,7 +771,7 @@ static inline unsigned int pdc20621_host_intr(struct ata_port *ap,
/* command completion, but no data xfer */
} else if (qc->tf.protocol == ATA_PROT_NODATA) {
status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
status = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
DPRINTK("BUS_NODATA (drv_stat 0x%X)\n", status);
qc->err_mask |= ac_err_mask(status);
ata_qc_complete(qc);
@ -890,7 +880,7 @@ static void pdc_eng_timeout(struct ata_port *ap)
break;
default:
drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
drv_stat = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
ata_port_printk(ap, KERN_ERR,
"unknown timeout, cmd 0x%x stat 0x%x\n",
@ -909,7 +899,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON(tf->protocol == ATA_PROT_DMA ||
tf->protocol == ATA_PROT_NODATA);
ata_tf_load(ap, tf);
ata_sff_tf_load(ap, tf);
}
@ -917,7 +907,7 @@ static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile
{
WARN_ON(tf->protocol == ATA_PROT_DMA ||
tf->protocol == ATA_PROT_NODATA);
ata_exec_command(ap, tf);
ata_sff_exec_command(ap, tf);
}

55
drivers/ata/sata_uli.c
Просмотреть файл

@ -76,50 +76,13 @@ static struct pci_driver uli_pci_driver = {
};
static struct scsi_host_template uli_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations uli_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
static struct ata_port_operations uli_ops = {
.inherits = &ata_bmdma_port_ops,
.scr_read = uli_scr_read,
.scr_write = uli_scr_write,
.port_start = ata_port_start,
};
static const struct ata_port_info uli_port_info = {
@ -212,11 +175,11 @@ static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
host->private_data = hpriv;
/* the first two ports are standard SFF */
rc = ata_pci_init_sff_host(host);
rc = ata_pci_sff_init_host(host);
if (rc)
return rc;
rc = ata_pci_init_bmdma(host);
rc = ata_pci_bmdma_init(host);
if (rc)
return rc;
@ -237,7 +200,7 @@ static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
((unsigned long)iomap[1] | ATA_PCI_CTL_OFS) + 4;
ioaddr->bmdma_addr = iomap[4] + 16;
hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4;
ata_std_ports(ioaddr);
ata_sff_std_ports(ioaddr);
ata_port_desc(host->ports[2],
"cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
@ -252,7 +215,7 @@ static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
((unsigned long)iomap[3] | ATA_PCI_CTL_OFS) + 4;
ioaddr->bmdma_addr = iomap[4] + 24;
hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5;
ata_std_ports(ioaddr);
ata_sff_std_ports(ioaddr);
ata_port_desc(host->ports[2],
"cmd 0x%llx ctl 0x%llx bmdma 0x%llx",
@ -279,8 +242,8 @@ static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_set_master(pdev);
pci_intx(pdev, 1);
return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
&uli_sht);
return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
IRQF_SHARED, &uli_sht);
}
static int __init uli_init(void)

126
drivers/ata/sata_via.c
Просмотреть файл

@ -71,7 +71,7 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static int svia_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
static int svia_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
static void svia_noop_freeze(struct ata_port *ap);
static void vt6420_error_handler(struct ata_port *ap);
static int vt6420_prereset(struct ata_link *link, unsigned long deadline);
static int vt6421_pata_cable_detect(struct ata_port *ap);
static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev);
static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev);
@ -100,110 +100,26 @@ static struct pci_driver svia_pci_driver = {
};
static struct scsi_host_template svia_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations vt6420_sata_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
static struct ata_port_operations vt6420_sata_ops = {
.inherits = &ata_bmdma_port_ops,
.freeze = svia_noop_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = vt6420_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
.prereset = vt6420_prereset,
};
static const struct ata_port_operations vt6421_pata_ops = {
static struct ata_port_operations vt6421_pata_ops = {
.inherits = &ata_bmdma_port_ops,
.cable_detect = vt6421_pata_cable_detect,
.set_piomode = vt6421_set_pio_mode,
.set_dmamode = vt6421_set_dma_mode,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = vt6421_pata_cable_detect,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.port_start = ata_port_start,
};
static const struct ata_port_operations vt6421_sata_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.cable_detect = ata_cable_sata,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
static struct ata_port_operations vt6421_sata_ops = {
.inherits = &ata_bmdma_port_ops,
.scr_read = svia_scr_read,
.scr_write = svia_scr_write,
.port_start = ata_port_start,
};
static const struct ata_port_info vt6420_port_info = {
@ -257,8 +173,8 @@ static void svia_noop_freeze(struct ata_port *ap)
/* Some VIA controllers choke if ATA_NIEN is manipulated in
* certain way. Leave it alone and just clear pending IRQ.
*/
ata_chk_status(ap);
ata_bmdma_irq_clear(ap);
ap->ops->sff_check_status(ap);
ata_sff_irq_clear(ap);
}
/**
@ -320,23 +236,17 @@ static int vt6420_prereset(struct ata_link *link, unsigned long deadline)
if (!online) {
/* tell EH to bail */
ehc->i.action &= ~ATA_EH_RESET_MASK;
ehc->i.action &= ~ATA_EH_RESET;
return 0;
}
skip_scr:
/* wait for !BSY */
ata_wait_ready(ap, deadline);
ata_sff_wait_ready(link, deadline);
return 0;
}
static void vt6420_error_handler(struct ata_port *ap)
{
ata_bmdma_drive_eh(ap, vt6420_prereset, ata_std_softreset, NULL,
ata_std_postreset);
}
static int vt6421_pata_cable_detect(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@ -394,7 +304,7 @@ static void vt6421_init_addrs(struct ata_port *ap)
ioaddr->bmdma_addr = bmdma_addr;
ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no);
ata_std_ports(ioaddr);
ata_sff_std_ports(ioaddr);
ata_port_pbar_desc(ap, ap->port_no, -1, "port");
ata_port_pbar_desc(ap, 4, ap->port_no * 8, "bmdma");
@ -406,7 +316,7 @@ static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
struct ata_host *host;
int rc;
rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
return rc;
*r_host = host;
@ -538,8 +448,8 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
svia_configure(pdev);
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
&svia_sht);
return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
IRQF_SHARED, &svia_sht);
}
static int __init svia_init(void)

44
drivers/ata/sata_vsc.c
Просмотреть файл

@ -200,7 +200,7 @@ static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
struct ata_ioports *ioaddr = &ap->ioaddr;
u16 nsect, lbal, lbam, lbah, feature;
tf->command = ata_check_status(ap);
tf->command = ata_sff_check_status(ap);
tf->device = readw(ioaddr->device_addr);
feature = readw(ioaddr->error_addr);
nsect = readw(ioaddr->nsect_addr);
@ -243,7 +243,7 @@ static void vsc_port_intr(u8 port_status, struct ata_port *ap)
qc = ata_qc_from_tag(ap, ap->link.active_tag);
if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
handled = ata_host_intr(ap, qc);
handled = ata_sff_host_intr(ap, qc);
/* We received an interrupt during a polled command,
* or some other spurious condition. Interrupt reporting
@ -251,7 +251,7 @@ static void vsc_port_intr(u8 port_status, struct ata_port *ap)
* simply clear the interrupt
*/
if (unlikely(!handled))
ata_chk_status(ap);
ap->ops->sff_check_status(ap);
}
/*
@ -300,46 +300,18 @@ out:
static struct scsi_host_template vsc_sata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
ATA_BMDMA_SHT(DRV_NAME),
};
static const struct ata_port_operations vsc_sata_ops = {
.tf_load = vsc_sata_tf_load,
.tf_read = vsc_sata_tf_read,
.exec_command = ata_exec_command,
.check_status = ata_check_status,
.dev_select = ata_std_dev_select,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
.data_xfer = ata_data_xfer,
static struct ata_port_operations vsc_sata_ops = {
.inherits = &ata_bmdma_port_ops,
.sff_tf_load = vsc_sata_tf_load,
.sff_tf_read = vsc_sata_tf_read,
.freeze = vsc_freeze,
.thaw = vsc_thaw,
.error_handler = ata_bmdma_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.scr_read = vsc_sata_scr_read,
.scr_write = vsc_sata_scr_write,
.port_start = ata_port_start,
};
static void __devinit vsc_sata_setup_port(struct ata_ioports *port,

74
drivers/scsi/ipr.c
Просмотреть файл

@ -3937,7 +3937,7 @@ static int __ipr_eh_dev_reset(struct scsi_cmnd * scsi_cmd)
if (ipr_is_gata(res) && res->sata_port) {
ap = res->sata_port->ap;
spin_unlock_irq(scsi_cmd->device->host->host_lock);
ata_do_eh(ap, NULL, NULL, ipr_sata_reset, NULL);
ata_std_error_handler(ap);
spin_lock_irq(scsi_cmd->device->host->host_lock);
list_for_each_entry(ipr_cmd, &ioa_cfg->pending_q, queue) {
@ -5040,33 +5040,6 @@ static void ipr_ata_post_internal(struct ata_queued_cmd *qc)
spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
}
/**
* ipr_tf_read - Read the current ATA taskfile for the ATA port
* @ap: ATA port
* @tf: destination ATA taskfile
*
* Return value:
* none
**/
static void ipr_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ipr_sata_port *sata_port = ap->private_data;
struct ipr_ioasa_gata *g = &sata_port->ioasa;
tf->feature = g->error;
tf->nsect = g->nsect;
tf->lbal = g->lbal;
tf->lbam = g->lbam;
tf->lbah = g->lbah;
tf->device = g->device;
tf->command = g->status;
tf->hob_nsect = g->hob_nsect;
tf->hob_lbal = g->hob_lbal;
tf->hob_lbam = g->hob_lbam;
tf->hob_lbah = g->hob_lbah;
tf->ctl = g->alt_status;
}
/**
* ipr_copy_sata_tf - Copy a SATA taskfile to an IOA data structure
* @regs: destination
@ -5245,40 +5218,41 @@ static unsigned int ipr_qc_issue(struct ata_queued_cmd *qc)
}
/**
* ipr_ata_check_status - Return last ATA status
* @ap: ATA port
* ipr_qc_fill_rtf - Read result TF
* @qc: ATA queued command
*
* Return value:
* ATA status
* true
**/
static u8 ipr_ata_check_status(struct ata_port *ap)
static bool ipr_qc_fill_rtf(struct ata_queued_cmd *qc)
{
struct ipr_sata_port *sata_port = ap->private_data;
return sata_port->ioasa.status;
}
struct ipr_sata_port *sata_port = qc->ap->private_data;
struct ipr_ioasa_gata *g = &sata_port->ioasa;
struct ata_taskfile *tf = &qc->result_tf;
/**
* ipr_ata_check_altstatus - Return last ATA altstatus
* @ap: ATA port
*
* Return value:
* Alt ATA status
**/
static u8 ipr_ata_check_altstatus(struct ata_port *ap)
{
struct ipr_sata_port *sata_port = ap->private_data;
return sata_port->ioasa.alt_status;
tf->feature = g->error;
tf->nsect = g->nsect;
tf->lbal = g->lbal;
tf->lbam = g->lbam;
tf->lbah = g->lbah;
tf->device = g->device;
tf->command = g->status;
tf->hob_nsect = g->hob_nsect;
tf->hob_lbal = g->hob_lbal;
tf->hob_lbam = g->hob_lbam;
tf->hob_lbah = g->hob_lbah;
tf->ctl = g->alt_status;
return true;
}
static struct ata_port_operations ipr_sata_ops = {
.check_status = ipr_ata_check_status,
.check_altstatus = ipr_ata_check_altstatus,
.dev_select = ata_noop_dev_select,
.phy_reset = ipr_ata_phy_reset,
.hardreset = ipr_sata_reset,
.post_internal_cmd = ipr_ata_post_internal,
.tf_read = ipr_tf_read,
.qc_prep = ata_noop_qc_prep,
.qc_issue = ipr_qc_issue,
.qc_fill_rtf = ipr_qc_fill_rtf,
.port_start = ata_sas_port_start,
.port_stop = ata_sas_port_stop
};

19
drivers/scsi/libsas/sas_ata.c
Просмотреть файл

@ -225,10 +225,12 @@ static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
return 0;
}
static u8 sas_ata_check_status(struct ata_port *ap)
static bool sas_ata_qc_fill_rtf(struct ata_queued_cmd *qc)
{
struct domain_device *dev = ap->private_data;
return dev->sata_dev.tf.command;
struct domain_device *dev = qc->ap->private_data;
memcpy(&qc->result_tf, &dev->sata_dev.tf, sizeof(qc->result_tf));
return true;
}
static void sas_ata_phy_reset(struct ata_port *ap)
@ -292,12 +294,6 @@ static void sas_ata_post_internal(struct ata_queued_cmd *qc)
}
}
static void sas_ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct domain_device *dev = ap->private_data;
memcpy(tf, &dev->sata_dev.tf, sizeof (*tf));
}
static int sas_ata_scr_write(struct ata_port *ap, unsigned int sc_reg_in,
u32 val)
{
@ -348,14 +344,11 @@ static int sas_ata_scr_read(struct ata_port *ap, unsigned int sc_reg_in,
}
static struct ata_port_operations sas_sata_ops = {
.check_status = sas_ata_check_status,
.check_altstatus = sas_ata_check_status,
.dev_select = ata_noop_dev_select,
.phy_reset = sas_ata_phy_reset,
.post_internal_cmd = sas_ata_post_internal,
.tf_read = sas_ata_tf_read,
.qc_prep = ata_noop_qc_prep,
.qc_issue = sas_ata_qc_issue,
.qc_fill_rtf = sas_ata_qc_fill_rtf,
.port_start = ata_sas_port_start,
.port_stop = ata_sas_port_stop,
.scr_read = sas_ata_scr_read,

684
include/linux/libata.h
Просмотреть файл

@ -122,6 +122,8 @@ enum {
ATAPI_MAX_DRAIN = 16 << 10,
ATA_ALL_DEVICES = (1 << ATA_MAX_DEVICES) - 1,
ATA_SHT_EMULATED = 1,
ATA_SHT_CMD_PER_LUN = 1,
ATA_SHT_THIS_ID = -1,
@ -163,9 +165,6 @@ enum {
ATA_DEV_NONE = 9, /* no device */
/* struct ata_link flags */
ATA_LFLAG_HRST_TO_RESUME = (1 << 0), /* hardreset to resume link */
ATA_LFLAG_SKIP_D2H_BSY = (1 << 1), /* can't wait for the first D2H
* Register FIS clearing BSY */
ATA_LFLAG_NO_SRST = (1 << 2), /* avoid softreset */
ATA_LFLAG_ASSUME_ATA = (1 << 3), /* assume ATA class */
ATA_LFLAG_ASSUME_SEMB = (1 << 4), /* assume SEMB class */
@ -225,6 +224,7 @@ enum {
ATA_QCFLAG_RESULT_TF = (1 << 4), /* result TF requested */
ATA_QCFLAG_CLEAR_EXCL = (1 << 5), /* clear excl_link on completion */
ATA_QCFLAG_QUIET = (1 << 6), /* don't report device error */
ATA_QCFLAG_RETRY = (1 << 7), /* retry after failure */
ATA_QCFLAG_FAILED = (1 << 16), /* cmd failed and is owned by EH */
ATA_QCFLAG_SENSE_VALID = (1 << 17), /* sense data valid */
@ -249,6 +249,25 @@ enum {
*/
ATA_TMOUT_FF_WAIT = 4 * HZ / 5,
/* Spec mandates to wait for ">= 2ms" before checking status
* after reset. We wait 150ms, because that was the magic
* delay used for ATAPI devices in Hale Landis's ATADRVR, for
* the period of time between when the ATA command register is
* written, and then status is checked. Because waiting for
* "a while" before checking status is fine, post SRST, we
* perform this magic delay here as well.
*
* Old drivers/ide uses the 2mS rule and then waits for ready.
*/
ATA_WAIT_AFTER_RESET_MSECS = 150,
/* If PMP is supported, we have to do follow-up SRST. As some
* PMPs don't send D2H Reg FIS after hardreset, LLDs are
* advised to wait only for the following duration before
* doing SRST.
*/
ATA_TMOUT_PMP_SRST_WAIT = 1 * HZ,
/* ATA bus states */
BUS_UNKNOWN = 0,
BUS_DMA = 1,
@ -292,17 +311,16 @@ enum {
/* reset / recovery action types */
ATA_EH_REVALIDATE = (1 << 0),
ATA_EH_SOFTRESET = (1 << 1),
ATA_EH_HARDRESET = (1 << 2),
ATA_EH_SOFTRESET = (1 << 1), /* meaningful only in ->prereset */
ATA_EH_HARDRESET = (1 << 2), /* meaningful only in ->prereset */
ATA_EH_RESET = ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
ATA_EH_ENABLE_LINK = (1 << 3),
ATA_EH_LPM = (1 << 4), /* link power management action */
ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE,
/* ata_eh_info->flags */
ATA_EHI_HOTPLUGGED = (1 << 0), /* could have been hotplugged */
ATA_EHI_RESUME_LINK = (1 << 1), /* resume link (reset modifier) */
ATA_EHI_NO_AUTOPSY = (1 << 2), /* no autopsy */
ATA_EHI_QUIET = (1 << 3), /* be quiet */
@ -313,7 +331,6 @@ enum {
ATA_EHI_POST_SETMODE = (1 << 20), /* revaildating after setmode */
ATA_EHI_DID_RESET = ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET,
ATA_EHI_RESET_MODIFIER_MASK = ATA_EHI_RESUME_LINK,
/* max tries if error condition is still set after ->error_handler */
ATA_EH_MAX_TRIES = 5,
@ -352,6 +369,22 @@ enum {
ATAPI_READ_CD = 2, /* READ CD [MSF] */
ATAPI_PASS_THRU = 3, /* SAT pass-thru */
ATAPI_MISC = 4, /* the rest */
/* Timing constants */
ATA_TIMING_SETUP = (1 << 0),
ATA_TIMING_ACT8B = (1 << 1),
ATA_TIMING_REC8B = (1 << 2),
ATA_TIMING_CYC8B = (1 << 3),
ATA_TIMING_8BIT = ATA_TIMING_ACT8B | ATA_TIMING_REC8B |
ATA_TIMING_CYC8B,
ATA_TIMING_ACTIVE = (1 << 4),
ATA_TIMING_RECOVER = (1 << 5),
ATA_TIMING_CYCLE = (1 << 6),
ATA_TIMING_UDMA = (1 << 7),
ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B |
ATA_TIMING_REC8B | ATA_TIMING_CYC8B |
ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
ATA_TIMING_CYCLE | ATA_TIMING_UDMA,
};
enum ata_xfer_mask {
@ -412,6 +445,7 @@ enum link_pm {
};
extern struct class_device_attribute class_device_attr_link_power_management_policy;
#ifdef CONFIG_ATA_SFF
struct ata_ioports {
void __iomem *cmd_addr;
void __iomem *data_addr;
@ -429,6 +463,7 @@ struct ata_ioports {
void __iomem *bmdma_addr;
void __iomem *scr_addr;
};
#endif /* CONFIG_ATA_SFF */
struct ata_host {
spinlock_t lock;
@ -436,7 +471,7 @@ struct ata_host {
void __iomem * const *iomap;
unsigned int n_ports;
void *private_data;
const struct ata_port_operations *ops;
struct ata_port_operations *ops;
unsigned long flags;
#ifdef CONFIG_ATA_ACPI
acpi_handle acpi_handle;
@ -605,7 +640,7 @@ struct ata_link {
struct ata_port {
struct Scsi_Host *scsi_host; /* our co-allocated scsi host */
const struct ata_port_operations *ops;
struct ata_port_operations *ops;
spinlock_t *lock;
unsigned long flags; /* ATA_FLAG_xxx */
unsigned int pflags; /* ATA_PFLAG_xxx */
@ -615,7 +650,9 @@ struct ata_port {
struct ata_prd *prd; /* our SG list */
dma_addr_t prd_dma; /* and its DMA mapping */
#ifdef CONFIG_ATA_SFF
struct ata_ioports ioaddr; /* ATA cmd/ctl/dma register blocks */
#endif /* CONFIG_ATA_SFF */
u8 ctl; /* cache of ATA control register */
u8 last_ctl; /* Cache last written value */
@ -667,81 +704,108 @@ struct ata_port {
u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */
};
/* The following initializer overrides a method to NULL whether one of
* its parent has the method defined or not. This is equivalent to
* ERR_PTR(-ENOENT). Unfortunately, ERR_PTR doesn't render a constant
* expression and thus can't be used as an initializer.
*/
#define ATA_OP_NULL (void *)(unsigned long)(-ENOENT)
struct ata_port_operations {
void (*dev_config) (struct ata_device *);
void (*set_piomode) (struct ata_port *, struct ata_device *);
void (*set_dmamode) (struct ata_port *, struct ata_device *);
unsigned long (*mode_filter) (struct ata_device *, unsigned long);
void (*tf_load) (struct ata_port *ap, const struct ata_taskfile *tf);
void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
void (*exec_command)(struct ata_port *ap, const struct ata_taskfile *tf);
u8 (*check_status)(struct ata_port *ap);
u8 (*check_altstatus)(struct ata_port *ap);
void (*dev_select)(struct ata_port *ap, unsigned int device);
void (*phy_reset) (struct ata_port *ap); /* obsolete */
int (*set_mode) (struct ata_link *link, struct ata_device **r_failed_dev);
int (*cable_detect) (struct ata_port *ap);
int (*check_atapi_dma) (struct ata_queued_cmd *qc);
void (*bmdma_setup) (struct ata_queued_cmd *qc);
void (*bmdma_start) (struct ata_queued_cmd *qc);
unsigned int (*data_xfer) (struct ata_device *dev, unsigned char *buf,
unsigned int buflen, int rw);
/*
* Command execution
*/
int (*qc_defer)(struct ata_queued_cmd *qc);
int (*check_atapi_dma)(struct ata_queued_cmd *qc);
void (*qc_prep)(struct ata_queued_cmd *qc);
unsigned int (*qc_issue)(struct ata_queued_cmd *qc);
bool (*qc_fill_rtf)(struct ata_queued_cmd *qc);
/* port multiplier */
void (*pmp_attach) (struct ata_port *ap);
void (*pmp_detach) (struct ata_port *ap);
/* Error handlers. ->error_handler overrides ->eng_timeout and
* indicates that new-style EH is in place.
/*
* Configuration and exception handling
*/
void (*eng_timeout) (struct ata_port *ap); /* obsolete */
int (*cable_detect)(struct ata_port *ap);
unsigned long (*mode_filter)(struct ata_device *dev, unsigned long xfer_mask);
void (*set_piomode)(struct ata_port *ap, struct ata_device *dev);
void (*set_dmamode)(struct ata_port *ap, struct ata_device *dev);
int (*set_mode)(struct ata_link *link, struct ata_device **r_failed_dev);
void (*dev_config)(struct ata_device *dev);
void (*freeze)(struct ata_port *ap);
void (*thaw)(struct ata_port *ap);
ata_prereset_fn_t prereset;
ata_reset_fn_t softreset;
ata_reset_fn_t hardreset;
ata_postreset_fn_t postreset;
ata_prereset_fn_t pmp_prereset;
ata_reset_fn_t pmp_softreset;
ata_reset_fn_t pmp_hardreset;
ata_postreset_fn_t pmp_postreset;
void (*error_handler)(struct ata_port *ap);
void (*post_internal_cmd)(struct ata_queued_cmd *qc);
irq_handler_t irq_handler;
void (*irq_clear) (struct ata_port *);
u8 (*irq_on) (struct ata_port *);
/*
* Optional features
*/
int (*scr_read)(struct ata_port *ap, unsigned int sc_reg, u32 *val);
int (*scr_write)(struct ata_port *ap, unsigned int sc_reg, u32 val);
int (*port_suspend) (struct ata_port *ap, pm_message_t mesg);
int (*port_resume) (struct ata_port *ap);
void (*pmp_attach)(struct ata_port *ap);
void (*pmp_detach)(struct ata_port *ap);
int (*enable_pm)(struct ata_port *ap, enum link_pm policy);
void (*disable_pm)(struct ata_port *ap);
/*
* Start, stop, suspend and resume
*/
int (*port_suspend)(struct ata_port *ap, pm_message_t mesg);
int (*port_resume)(struct ata_port *ap);
int (*port_start)(struct ata_port *ap);
void (*port_stop)(struct ata_port *ap);
void (*host_stop)(struct ata_host *host);
#ifdef CONFIG_ATA_SFF
/*
* SFF / taskfile oriented ops
*/
void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
u8 (*sff_check_status)(struct ata_port *ap);
u8 (*sff_check_altstatus)(struct ata_port *ap);
void (*sff_tf_load)(struct ata_port *ap, const struct ata_taskfile *tf);
void (*sff_tf_read)(struct ata_port *ap, struct ata_taskfile *tf);
void (*sff_exec_command)(struct ata_port *ap,
const struct ata_taskfile *tf);
unsigned int (*sff_data_xfer)(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw);
u8 (*sff_irq_on)(struct ata_port *);
void (*sff_irq_clear)(struct ata_port *);
void (*bmdma_setup)(struct ata_queued_cmd *qc);
void (*bmdma_start)(struct ata_queued_cmd *qc);
void (*bmdma_stop)(struct ata_queued_cmd *qc);
u8 (*bmdma_status)(struct ata_port *ap);
#endif /* CONFIG_ATA_SFF */
/*
* Obsolete
*/
void (*phy_reset)(struct ata_port *ap);
void (*eng_timeout)(struct ata_port *ap);
/*
* ->inherits must be the last field and all the preceding
* fields must be pointers.
*/
const struct ata_port_operations *inherits;
};
struct ata_port_info {
struct scsi_host_template *sht;
unsigned long flags;
unsigned long link_flags;
unsigned long pio_mask;
unsigned long mwdma_mask;
unsigned long udma_mask;
const struct ata_port_operations *port_ops;
irq_handler_t irq_handler;
struct ata_port_operations *port_ops;
void *private_data;
};
@ -759,11 +823,14 @@ struct ata_timing {
#define FIT(v, vmin, vmax) max_t(short, min_t(short, v, vmax), vmin)
/*
* Core layer - drivers/ata/libata-core.c
*/
extern const unsigned long sata_deb_timing_normal[];
extern const unsigned long sata_deb_timing_hotplug[];
extern const unsigned long sata_deb_timing_long[];
extern const struct ata_port_operations ata_dummy_port_ops;
extern struct ata_port_operations ata_dummy_port_ops;
extern const struct ata_port_info ata_dummy_port_info;
static inline const unsigned long *
@ -782,22 +849,21 @@ static inline int ata_port_is_dummy(struct ata_port *ap)
extern void sata_print_link_status(struct ata_link *link);
extern void ata_port_probe(struct ata_port *);
extern void ata_bus_reset(struct ata_port *ap);
extern int sata_set_spd(struct ata_link *link);
extern int ata_std_prereset(struct ata_link *link, unsigned long deadline);
extern int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
int (*check_ready)(struct ata_link *link));
extern int sata_link_debounce(struct ata_link *link,
const unsigned long *params, unsigned long deadline);
extern int sata_link_resume(struct ata_link *link, const unsigned long *params,
unsigned long deadline);
extern int ata_std_prereset(struct ata_link *link, unsigned long deadline);
extern int ata_std_softreset(struct ata_link *link, unsigned int *classes,
unsigned long deadline);
extern int sata_link_hardreset(struct ata_link *link,
const unsigned long *timing, unsigned long deadline);
const unsigned long *timing, unsigned long deadline,
bool *online, int (*check_ready)(struct ata_link *));
extern int sata_std_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
extern void ata_std_postreset(struct ata_link *link, unsigned int *classes);
extern void ata_port_disable(struct ata_port *);
extern void ata_std_ports(struct ata_ioports *ioaddr);
extern struct ata_host *ata_host_alloc(struct device *dev, int max_ports);
extern struct ata_host *ata_host_alloc_pinfo(struct device *dev,
@ -810,7 +876,7 @@ extern int ata_host_activate(struct ata_host *host, int irq,
struct scsi_host_template *sht);
extern void ata_host_detach(struct ata_host *host);
extern void ata_host_init(struct ata_host *, struct device *,
unsigned long, const struct ata_port_operations *);
unsigned long, struct ata_port_operations *);
extern int ata_scsi_detect(struct scsi_host_template *sht);
extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
@ -823,7 +889,6 @@ extern void ata_sas_port_stop(struct ata_port *ap);
extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *);
extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
struct ata_port *ap);
extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
extern int sata_scr_valid(struct ata_link *link);
extern int sata_scr_read(struct ata_link *link, int reg, u32 *val);
extern int sata_scr_write(struct ata_link *link, int reg, u32 val);
@ -835,21 +900,9 @@ extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg);
extern void ata_host_resume(struct ata_host *host);
#endif
extern int ata_ratelimit(void);
extern int ata_busy_sleep(struct ata_port *ap,
unsigned long timeout_pat, unsigned long timeout);
extern void ata_wait_after_reset(struct ata_port *ap, unsigned long deadline);
extern int ata_wait_ready(struct ata_port *ap, unsigned long deadline);
extern u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
unsigned long interval_msec,
unsigned long timeout_msec);
extern unsigned int ata_dev_try_classify(struct ata_device *dev, int present,
u8 *r_err);
/*
* Default driver ops implementations
*/
extern void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
extern void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
extern int atapi_cmd_type(u8 opcode);
extern void ata_tf_to_fis(const struct ata_taskfile *tf,
u8 pmp, int is_cmd, u8 *fis);
@ -864,23 +917,9 @@ extern unsigned long ata_xfer_mode2mask(u8 xfer_mode);
extern int ata_xfer_mode2shift(unsigned long xfer_mode);
extern const char *ata_mode_string(unsigned long xfer_mask);
extern unsigned long ata_id_xfermask(const u16 *id);
extern void ata_noop_dev_select(struct ata_port *ap, unsigned int device);
extern void ata_std_dev_select(struct ata_port *ap, unsigned int device);
extern u8 ata_check_status(struct ata_port *ap);
extern u8 ata_altstatus(struct ata_port *ap);
extern void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf);
extern int ata_port_start(struct ata_port *ap);
extern int ata_sff_port_start(struct ata_port *ap);
extern irqreturn_t ata_interrupt(int irq, void *dev_instance);
extern unsigned int ata_data_xfer(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw);
extern unsigned int ata_data_xfer_noirq(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw);
extern int ata_std_qc_defer(struct ata_queued_cmd *qc);
extern void ata_dumb_qc_prep(struct ata_queued_cmd *qc);
extern void ata_qc_prep(struct ata_queued_cmd *qc);
extern void ata_noop_qc_prep(struct ata_queued_cmd *qc);
extern unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc);
extern void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem);
extern unsigned int ata_dev_classify(const struct ata_taskfile *tf);
@ -889,24 +928,8 @@ extern void ata_id_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
extern void ata_id_c_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
extern void ata_bmdma_start(struct ata_queued_cmd *qc);
extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
extern u8 ata_bmdma_status(struct ata_port *ap);
extern void ata_bmdma_irq_clear(struct ata_port *ap);
extern void ata_bmdma_freeze(struct ata_port *ap);
extern void ata_bmdma_thaw(struct ata_port *ap);
extern void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_reset_fn_t softreset,
ata_reset_fn_t hardreset,
ata_postreset_fn_t postreset);
extern void ata_bmdma_error_handler(struct ata_port *ap);
extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc);
extern int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
u8 status, int in_wq);
extern void ata_qc_complete(struct ata_queued_cmd *qc);
extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active,
void (*finish_qc)(struct ata_queued_cmd *));
extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active);
extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *));
extern int ata_std_bios_param(struct scsi_device *sdev,
@ -918,7 +941,6 @@ extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
int queue_depth);
extern struct ata_device *ata_dev_pair(struct ata_device *adev);
extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
extern u8 ata_irq_on(struct ata_port *ap);
extern int ata_cable_40wire(struct ata_port *ap);
extern int ata_cable_80wire(struct ata_port *ap);
@ -926,10 +948,7 @@ extern int ata_cable_sata(struct ata_port *ap);
extern int ata_cable_ignore(struct ata_port *ap);
extern int ata_cable_unknown(struct ata_port *ap);
/*
* Timing helpers
*/
/* Timing helpers */
extern unsigned int ata_pio_need_iordy(const struct ata_device *);
extern const struct ata_timing *ata_timing_find_mode(u8 xfer_mode);
extern int ata_timing_compute(struct ata_device *, unsigned short,
@ -939,24 +958,31 @@ extern void ata_timing_merge(const struct ata_timing *,
unsigned int);
extern u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle);
enum {
ATA_TIMING_SETUP = (1 << 0),
ATA_TIMING_ACT8B = (1 << 1),
ATA_TIMING_REC8B = (1 << 2),
ATA_TIMING_CYC8B = (1 << 3),
ATA_TIMING_8BIT = ATA_TIMING_ACT8B | ATA_TIMING_REC8B |
ATA_TIMING_CYC8B,
ATA_TIMING_ACTIVE = (1 << 4),
ATA_TIMING_RECOVER = (1 << 5),
ATA_TIMING_CYCLE = (1 << 6),
ATA_TIMING_UDMA = (1 << 7),
ATA_TIMING_ALL = ATA_TIMING_SETUP | ATA_TIMING_ACT8B |
ATA_TIMING_REC8B | ATA_TIMING_CYC8B |
ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
ATA_TIMING_CYCLE | ATA_TIMING_UDMA,
/* PCI */
#ifdef CONFIG_PCI
struct pci_dev;
struct pci_bits {
unsigned int reg; /* PCI config register to read */
unsigned int width; /* 1 (8 bit), 2 (16 bit), 4 (32 bit) */
unsigned long mask;
unsigned long val;
};
/* libata-acpi.c */
extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
extern void ata_pci_remove_one(struct pci_dev *pdev);
#ifdef CONFIG_PM
extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg);
extern int __must_check ata_pci_device_do_resume(struct pci_dev *pdev);
extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
extern int ata_pci_device_resume(struct pci_dev *pdev);
#endif /* CONFIG_PM */
#endif /* CONFIG_PCI */
/*
* ACPI - drivers/ata/libata-acpi.c
*/
#ifdef CONFIG_ATA_ACPI
static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
{
@ -1000,56 +1026,8 @@ static inline int ata_acpi_cbl_80wire(struct ata_port *ap,
}
#endif
#ifdef CONFIG_PCI
struct pci_dev;
extern int ata_pci_init_one(struct pci_dev *pdev,
const struct ata_port_info * const * ppi);
extern void ata_pci_remove_one(struct pci_dev *pdev);
#ifdef CONFIG_PM
extern void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg);
extern int __must_check ata_pci_device_do_resume(struct pci_dev *pdev);
extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
extern int ata_pci_device_resume(struct pci_dev *pdev);
#endif
extern int ata_pci_clear_simplex(struct pci_dev *pdev);
struct pci_bits {
unsigned int reg; /* PCI config register to read */
unsigned int width; /* 1 (8 bit), 2 (16 bit), 4 (32 bit) */
unsigned long mask;
unsigned long val;
};
extern int ata_pci_init_sff_host(struct ata_host *host);
extern int ata_pci_init_bmdma(struct ata_host *host);
extern int ata_pci_prepare_sff_host(struct pci_dev *pdev,
const struct ata_port_info * const * ppi,
struct ata_host **r_host);
extern int ata_pci_activate_sff_host(struct ata_host *host,
irq_handler_t irq_handler,
struct scsi_host_template *sht);
extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
extern unsigned long ata_pci_default_filter(struct ata_device *dev,
unsigned long xfer_mask);
#endif /* CONFIG_PCI */
/*
* PMP
*/
extern int sata_pmp_qc_defer_cmd_switch(struct ata_queued_cmd *qc);
extern int sata_pmp_std_prereset(struct ata_link *link, unsigned long deadline);
extern int sata_pmp_std_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
extern void sata_pmp_std_postreset(struct ata_link *link, unsigned int *class);
extern void sata_pmp_do_eh(struct ata_port *ap,
ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
ata_reset_fn_t hardreset, ata_postreset_fn_t postreset,
ata_prereset_fn_t pmp_prereset, ata_reset_fn_t pmp_softreset,
ata_reset_fn_t pmp_hardreset, ata_postreset_fn_t pmp_postreset);
/*
* EH
* EH - drivers/ata/libata-eh.c
*/
extern void ata_port_schedule_eh(struct ata_port *ap);
extern int ata_link_abort(struct ata_link *link);
@ -1066,6 +1044,92 @@ extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
ata_postreset_fn_t postreset);
extern void ata_std_error_handler(struct ata_port *ap);
/*
* Base operations to inherit from and initializers for sht
*
* Operations
*
* base : Common to all libata drivers.
* sata : SATA controllers w/ native interface.
* pmp : SATA controllers w/ PMP support.
* sff : SFF ATA controllers w/o BMDMA support.
* bmdma : SFF ATA controllers w/ BMDMA support.
*
* sht initializers
*
* BASE : Common to all libata drivers. The user must set
* sg_tablesize and dma_boundary.
* PIO : SFF ATA controllers w/ only PIO support.
* BMDMA : SFF ATA controllers w/ BMDMA support. sg_tablesize and
* dma_boundary are set to BMDMA limits.
* NCQ : SATA controllers supporting NCQ. The user must set
* sg_tablesize, dma_boundary and can_queue.
*/
extern const struct ata_port_operations ata_base_port_ops;
extern const struct ata_port_operations sata_port_ops;
#define ATA_BASE_SHT(drv_name) \
.module = THIS_MODULE, \
.name = drv_name, \
.ioctl = ata_scsi_ioctl, \
.queuecommand = ata_scsi_queuecmd, \
.can_queue = ATA_DEF_QUEUE, \
.this_id = ATA_SHT_THIS_ID, \
.cmd_per_lun = ATA_SHT_CMD_PER_LUN, \
.emulated = ATA_SHT_EMULATED, \
.use_clustering = ATA_SHT_USE_CLUSTERING, \
.proc_name = drv_name, \
.slave_configure = ata_scsi_slave_config, \
.slave_destroy = ata_scsi_slave_destroy, \
.bios_param = ata_std_bios_param
#define ATA_NCQ_SHT(drv_name) \
ATA_BASE_SHT(drv_name), \
.change_queue_depth = ata_scsi_change_queue_depth
/*
* PMP helpers
*/
#ifdef CONFIG_SATA_PMP
static inline bool sata_pmp_supported(struct ata_port *ap)
{
return ap->flags & ATA_FLAG_PMP;
}
static inline bool sata_pmp_attached(struct ata_port *ap)
{
return ap->nr_pmp_links != 0;
}
static inline int ata_is_host_link(const struct ata_link *link)
{
return link == &link->ap->link;
}
#else /* CONFIG_SATA_PMP */
static inline bool sata_pmp_supported(struct ata_port *ap)
{
return false;
}
static inline bool sata_pmp_attached(struct ata_port *ap)
{
return false;
}
static inline int ata_is_host_link(const struct ata_link *link)
{
return 1;
}
#endif /* CONFIG_SATA_PMP */
static inline int sata_srst_pmp(struct ata_link *link)
{
if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
return SATA_PMP_CTRL_PORT;
return link->pmp;
}
/*
* printk helpers
@ -1074,7 +1138,7 @@ extern void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
printk("%sata%u: "fmt, lv, (ap)->print_id , ##args)
#define ata_link_printk(link, lv, fmt, args...) do { \
if ((link)->ap->nr_pmp_links) \
if (sata_pmp_attached((link)->ap)) \
printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id, \
(link)->pmp , ##args); \
else \
@ -1094,18 +1158,11 @@ extern void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...)
__attribute__ ((format (printf, 2, 3)));
extern void ata_ehi_clear_desc(struct ata_eh_info *ehi);
static inline void ata_ehi_schedule_probe(struct ata_eh_info *ehi)
{
ehi->flags |= ATA_EHI_RESUME_LINK;
ehi->action |= ATA_EH_SOFTRESET;
ehi->probe_mask |= (1 << ATA_MAX_DEVICES) - 1;
}
static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi)
{
ata_ehi_schedule_probe(ehi);
ehi->probe_mask |= (1 << ATA_MAX_DEVICES) - 1;
ehi->flags |= ATA_EHI_HOTPLUGGED;
ehi->action |= ATA_EH_ENABLE_LINK;
ehi->action |= ATA_EH_RESET | ATA_EH_ENABLE_LINK;
ehi->err_mask |= AC_ERR_ATA_BUS;
}
@ -1126,7 +1183,7 @@ static inline unsigned int ata_tag_valid(unsigned int tag)
static inline unsigned int ata_tag_internal(unsigned int tag)
{
return tag == ATA_MAX_QUEUE - 1;
return tag == ATA_TAG_INTERNAL;
}
/*
@ -1167,11 +1224,6 @@ static inline unsigned int ata_dev_absent(const struct ata_device *dev)
/*
* link helpers
*/
static inline int ata_is_host_link(const struct ata_link *link)
{
return link == &link->ap->link;
}
static inline int ata_link_max_devices(const struct ata_link *link)
{
if (ata_is_host_link(link) && link->ap->flags & ATA_FLAG_SLAVE_POSS)
@ -1186,7 +1238,7 @@ static inline int ata_link_active(struct ata_link *link)
static inline struct ata_link *ata_port_first_link(struct ata_port *ap)
{
if (ap->nr_pmp_links)
if (sata_pmp_attached(ap))
return ap->pmp_link;
return &ap->link;
}
@ -1195,8 +1247,8 @@ static inline struct ata_link *ata_port_next_link(struct ata_link *link)
{
struct ata_port *ap = link->ap;
if (link == &ap->link) {
if (!ap->nr_pmp_links)
if (ata_is_host_link(link)) {
if (!sata_pmp_attached(ap))
return NULL;
return ap->pmp_link;
}
@ -1222,11 +1274,6 @@ static inline struct ata_link *ata_port_next_link(struct ata_link *link)
for ((dev) = (link)->device + ata_link_max_devices(link) - 1; \
(dev) >= (link)->device || ((dev) = NULL); (dev)--)
static inline u8 ata_chk_status(struct ata_port *ap)
{
return ap->ops->check_status(ap);
}
/**
* ata_ncq_enabled - Test whether NCQ is enabled
* @dev: ATA device to test for
@ -1243,74 +1290,6 @@ static inline int ata_ncq_enabled(struct ata_device *dev)
ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ;
}
/**
* ata_pause - Flush writes and pause 400 nanoseconds.
* @ap: Port to wait for.
*
* LOCKING:
* Inherited from caller.
*/
static inline void ata_pause(struct ata_port *ap)
{
ata_altstatus(ap);
ndelay(400);
}
/**
* ata_busy_wait - Wait for a port status register
* @ap: Port to wait for.
* @bits: bits that must be clear
* @max: number of 10uS waits to perform
*
* Waits up to max*10 microseconds for the selected bits in the port's
* status register to be cleared.
* Returns final value of status register.
*
* LOCKING:
* Inherited from caller.
*/
static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits,
unsigned int max)
{
u8 status;
do {
udelay(10);
status = ata_chk_status(ap);
max--;
} while (status != 0xff && (status & bits) && (max > 0));
return status;
}
/**
* ata_wait_idle - Wait for a port to be idle.
* @ap: Port to wait for.
*
* Waits up to 10ms for port's BUSY and DRQ signals to clear.
* Returns final value of status register.
*
* LOCKING:
* Inherited from caller.
*/
static inline u8 ata_wait_idle(struct ata_port *ap)
{
u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
#ifdef ATA_DEBUG
if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ)))
ata_port_printk(ap, KERN_DEBUG, "abnormal Status 0x%X\n",
status);
#endif
return status;
}
static inline void ata_qc_set_polling(struct ata_queued_cmd *qc)
{
qc->tf.ctl |= ATA_NIEN;
@ -1403,4 +1382,171 @@ static inline struct ata_port *ata_shost_to_port(struct Scsi_Host *host)
return *(struct ata_port **)&host->hostdata[0];
}
/**************************************************************************
* PMP - drivers/ata/libata-pmp.c
*/
#ifdef CONFIG_SATA_PMP
extern const struct ata_port_operations sata_pmp_port_ops;
extern int sata_pmp_qc_defer_cmd_switch(struct ata_queued_cmd *qc);
extern void sata_pmp_error_handler(struct ata_port *ap);
#else /* CONFIG_SATA_PMP */
#define sata_pmp_port_ops sata_port_ops
#define sata_pmp_qc_defer_cmd_switch ata_std_qc_defer
#define sata_pmp_error_handler ata_std_error_handler
#endif /* CONFIG_SATA_PMP */
/**************************************************************************
* SFF - drivers/ata/libata-sff.c
*/
#ifdef CONFIG_ATA_SFF
extern const struct ata_port_operations ata_sff_port_ops;
extern const struct ata_port_operations ata_bmdma_port_ops;
/* PIO only, sg_tablesize and dma_boundary limits can be removed */
#define ATA_PIO_SHT(drv_name) \
ATA_BASE_SHT(drv_name), \
.sg_tablesize = LIBATA_MAX_PRD, \
.dma_boundary = ATA_DMA_BOUNDARY
#define ATA_BMDMA_SHT(drv_name) \
ATA_BASE_SHT(drv_name), \
.sg_tablesize = LIBATA_MAX_PRD, \
.dma_boundary = ATA_DMA_BOUNDARY
extern void ata_sff_qc_prep(struct ata_queued_cmd *qc);
extern void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc);
extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
extern u8 ata_sff_check_status(struct ata_port *ap);
extern u8 ata_sff_altstatus(struct ata_port *ap);
extern int ata_sff_busy_sleep(struct ata_port *ap,
unsigned long timeout_pat, unsigned long timeout);
extern int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline);
extern void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
extern void ata_sff_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
extern void ata_sff_exec_command(struct ata_port *ap,
const struct ata_taskfile *tf);
extern unsigned int ata_sff_data_xfer(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw);
extern unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw);
extern u8 ata_sff_irq_on(struct ata_port *ap);
extern void ata_sff_irq_clear(struct ata_port *ap);
extern int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
u8 status, int in_wq);
extern unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc);
extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc);
extern unsigned int ata_sff_host_intr(struct ata_port *ap,
struct ata_queued_cmd *qc);
extern irqreturn_t ata_sff_interrupt(int irq, void *dev_instance);
extern void ata_sff_freeze(struct ata_port *ap);
extern void ata_sff_thaw(struct ata_port *ap);
extern int ata_sff_prereset(struct ata_link *link, unsigned long deadline);
extern unsigned int ata_sff_dev_classify(struct ata_device *dev, int present,
u8 *r_err);
extern int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask,
unsigned long deadline);
extern int ata_sff_softreset(struct ata_link *link, unsigned int *classes,
unsigned long deadline);
extern int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
extern void ata_sff_postreset(struct ata_link *link, unsigned int *classes);
extern void ata_sff_error_handler(struct ata_port *ap);
extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc);
extern int ata_sff_port_start(struct ata_port *ap);
extern void ata_sff_std_ports(struct ata_ioports *ioaddr);
extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev,
unsigned long xfer_mask);
extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
extern void ata_bmdma_start(struct ata_queued_cmd *qc);
extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
extern u8 ata_bmdma_status(struct ata_port *ap);
extern void ata_bus_reset(struct ata_port *ap);
#ifdef CONFIG_PCI
extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
extern int ata_pci_bmdma_init(struct ata_host *host);
extern int ata_pci_sff_init_host(struct ata_host *host);
extern int ata_pci_sff_prepare_host(struct pci_dev *pdev,
const struct ata_port_info * const * ppi,
struct ata_host **r_host);
extern int ata_pci_sff_activate_host(struct ata_host *host,
irq_handler_t irq_handler,
struct scsi_host_template *sht);
extern int ata_pci_sff_init_one(struct pci_dev *pdev,
const struct ata_port_info * const * ppi,
struct scsi_host_template *sht, void *host_priv);
#endif /* CONFIG_PCI */
/**
* ata_sff_pause - Flush writes and pause 400 nanoseconds.
* @ap: Port to wait for.
*
* LOCKING:
* Inherited from caller.
*/
static inline void ata_sff_pause(struct ata_port *ap)
{
ata_sff_altstatus(ap);
ndelay(400);
}
/**
* ata_sff_busy_wait - Wait for a port status register
* @ap: Port to wait for.
* @bits: bits that must be clear
* @max: number of 10uS waits to perform
*
* Waits up to max*10 microseconds for the selected bits in the port's
* status register to be cleared.
* Returns final value of status register.
*
* LOCKING:
* Inherited from caller.
*/
static inline u8 ata_sff_busy_wait(struct ata_port *ap, unsigned int bits,
unsigned int max)
{
u8 status;
do {
udelay(10);
status = ap->ops->sff_check_status(ap);
max--;
} while (status != 0xff && (status & bits) && (max > 0));
return status;
}
/**
* ata_wait_idle - Wait for a port to be idle.
* @ap: Port to wait for.
*
* Waits up to 10ms for port's BUSY and DRQ signals to clear.
* Returns final value of status register.
*
* LOCKING:
* Inherited from caller.
*/
static inline u8 ata_wait_idle(struct ata_port *ap)
{
u8 status = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
#ifdef ATA_DEBUG
if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ)))
ata_port_printk(ap, KERN_DEBUG, "abnormal Status 0x%X\n",
status);
#endif
return status;
}
#endif /* CONFIG_ATA_SFF */
#endif /* __LINUX_LIBATA_H__ */