S3C24XX: Move and update IIS headers

Move the IIS headers to their correct place.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

arch/arm/mach-s3c2410/dma.c

@@ -28,7 +28,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {

arch/arm/mach-s3c2410/include/mach/hardware.h

@@ -131,7 +131,4 @@ extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
 
 /* machine specific hardware definitions should go after this */
 
-/* currently here until moved into config (todo) */
-#define CONFIG_NO_MULTIWORD_IO
-
 #endif /* __ASM_ARCH_HARDWARE_H */

arch/arm/mach-s3c2410/include/mach/io.h

@@ -9,7 +9,7 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <mach/hardware.h>
+#include <mach/map.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 

arch/arm/mach-s3c2412/dma.c

@@ -29,8 +29,8 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-s3c2412-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID }

arch/arm/mach-s3c2440/dma.c

@@ -28,7 +28,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = {

arch/arm/mach-s3c2443/dma.c

@@ -29,7 +29,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 #include <plat/regs-spi.h>
 
 #define MAP(x) { \

arch/arm/mach-shark/include/mach/io.h

@@ -14,7 +14,7 @@
 #define PCIO_BASE	0xe0000000
 #define IO_SPACE_LIMIT	0xffffffff
 
-#define __io(a)		((void __iomem *)(PCIO_BASE + (a)))
+#define __io(a)		__typesafe_io(PCIO_BASE + (a))
 #define __mem_pci(addr)	(addr)
 
 #endif

arch/arm/plat-s3c24xx/clock-dclk.c

@@ -18,6 +18,7 @@
 
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
+#include <mach/hardware.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>

sound/soc/s3c24xx/neo1973_wm8753.c

@@ -33,7 +33,7 @@
 #include <linux/io.h>
 #include <mach/spi-gpio.h>
 
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 
 #include "../codecs/wm8753.h"
 #include "lm4857.h"

sound/soc/s3c24xx/s3c2412-i2s.c

@@ -22,6 +22,7 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/kernel.h>
+#include <linux/io.h>
 
 #include <sound/core.h>
 #include <sound/pcm.h>
@@ -30,10 +31,7 @@
 #include <sound/soc.h>
 #include <mach/hardware.h>
 
-#include <linux/io.h>
-#include <asm/dma.h>
-
-#include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
+#include <plat/regs-s3c2412-iis.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/audio.h>

sound/soc/s3c24xx/s3c24xx-i2s.c

@@ -34,7 +34,7 @@
 #include <asm/dma.h>
 #include <mach/dma.h>
 
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 
 #include "s3c24xx-pcm.h"
 #include "s3c24xx-i2s.h"

sound/soc/s3c24xx/s3c24xx_uda134x.c

@@ -22,7 +22,7 @@
 #include <sound/s3c24xx_uda134x.h>
 #include <sound/uda134x.h>
 
-#include <asm/plat-s3c24xx/regs-iis.h>
+#include <plat/regs-iis.h>
 
 #include "s3c24xx-pcm.h"
 #include "s3c24xx-i2s.h"