ufs-qcom: add support for Qualcomm Technologies Inc platforms
This change adds support for Qualcomm Technologies Inc platforms that use UFS driver. for example, it adds : - PM specific operations during hibern8, suspend, resume, clock setup - qcom-ufs generic phy driver initialization, calibration, power-on/off sequence, etc. - UFS Controller specific configuration - Rate, Gear, Mode negotiation between device and controller Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Dov Levenglick <dovl@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
This commit is contained in:
Родитель
ca14ab55fb
Коммит
81c0fc51b7
|
@ -70,3 +70,16 @@ config SCSI_UFSHCD_PLATFORM
|
|||
If you have a controller with this interface, say Y or M here.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
config SCSI_UFS_QCOM
|
||||
bool "QCOM specific hooks to UFS controller platform driver"
|
||||
depends on SCSI_UFSHCD_PLATFORM && ARCH_MSM
|
||||
select PHY_QCOM_UFS
|
||||
help
|
||||
This selects the QCOM specific additions to UFSHCD platform driver.
|
||||
UFS host on QCOM needs some vendor specific configuration before
|
||||
accessing the hardware which includes PHY configuration and vendor
|
||||
specific registers.
|
||||
|
||||
Select this if you have UFS controller on QCOM chipset.
|
||||
If unsure, say N.
|
||||
|
|
|
@ -1,4 +1,5 @@
|
|||
# UFSHCD makefile
|
||||
obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
|
||||
obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
|
||||
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
|
||||
obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
|
||||
|
|
Разница между файлами не показана из-за своего большого размера
Загрузить разницу
|
@ -0,0 +1,170 @@
|
|||
/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 and
|
||||
* only version 2 as published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
*/
|
||||
|
||||
#ifndef UFS_QCOM_H_
|
||||
#define UFS_QCOM_H_
|
||||
|
||||
#define MAX_UFS_QCOM_HOSTS 1
|
||||
#define MAX_U32 (~(u32)0)
|
||||
#define MPHY_TX_FSM_STATE 0x41
|
||||
#define TX_FSM_HIBERN8 0x1
|
||||
#define HBRN8_POLL_TOUT_MS 100
|
||||
#define DEFAULT_CLK_RATE_HZ 1000000
|
||||
#define BUS_VECTOR_NAME_LEN 32
|
||||
|
||||
#define UFS_HW_VER_MAJOR_SHFT (28)
|
||||
#define UFS_HW_VER_MAJOR_MASK (0x000F << UFS_HW_VER_MAJOR_SHFT)
|
||||
#define UFS_HW_VER_MINOR_SHFT (16)
|
||||
#define UFS_HW_VER_MINOR_MASK (0x0FFF << UFS_HW_VER_MINOR_SHFT)
|
||||
#define UFS_HW_VER_STEP_SHFT (0)
|
||||
#define UFS_HW_VER_STEP_MASK (0xFFFF << UFS_HW_VER_STEP_SHFT)
|
||||
|
||||
/* vendor specific pre-defined parameters */
|
||||
#define SLOW 1
|
||||
#define FAST 2
|
||||
|
||||
#define UFS_QCOM_LIMIT_NUM_LANES_RX 2
|
||||
#define UFS_QCOM_LIMIT_NUM_LANES_TX 2
|
||||
#define UFS_QCOM_LIMIT_HSGEAR_RX UFS_HS_G2
|
||||
#define UFS_QCOM_LIMIT_HSGEAR_TX UFS_HS_G2
|
||||
#define UFS_QCOM_LIMIT_PWMGEAR_RX UFS_PWM_G4
|
||||
#define UFS_QCOM_LIMIT_PWMGEAR_TX UFS_PWM_G4
|
||||
#define UFS_QCOM_LIMIT_RX_PWR_PWM SLOW_MODE
|
||||
#define UFS_QCOM_LIMIT_TX_PWR_PWM SLOW_MODE
|
||||
#define UFS_QCOM_LIMIT_RX_PWR_HS FAST_MODE
|
||||
#define UFS_QCOM_LIMIT_TX_PWR_HS FAST_MODE
|
||||
#define UFS_QCOM_LIMIT_HS_RATE PA_HS_MODE_B
|
||||
#define UFS_QCOM_LIMIT_DESIRED_MODE FAST
|
||||
|
||||
/* QCOM UFS host controller vendor specific registers */
|
||||
enum {
|
||||
REG_UFS_SYS1CLK_1US = 0xC0,
|
||||
REG_UFS_TX_SYMBOL_CLK_NS_US = 0xC4,
|
||||
REG_UFS_LOCAL_PORT_ID_REG = 0xC8,
|
||||
REG_UFS_PA_ERR_CODE = 0xCC,
|
||||
REG_UFS_RETRY_TIMER_REG = 0xD0,
|
||||
REG_UFS_PA_LINK_STARTUP_TIMER = 0xD8,
|
||||
REG_UFS_CFG1 = 0xDC,
|
||||
REG_UFS_CFG2 = 0xE0,
|
||||
REG_UFS_HW_VERSION = 0xE4,
|
||||
|
||||
UFS_DBG_RD_REG_UAWM = 0x100,
|
||||
UFS_DBG_RD_REG_UARM = 0x200,
|
||||
UFS_DBG_RD_REG_TXUC = 0x300,
|
||||
UFS_DBG_RD_REG_RXUC = 0x400,
|
||||
UFS_DBG_RD_REG_DFC = 0x500,
|
||||
UFS_DBG_RD_REG_TRLUT = 0x600,
|
||||
UFS_DBG_RD_REG_TMRLUT = 0x700,
|
||||
UFS_UFS_DBG_RD_REG_OCSC = 0x800,
|
||||
|
||||
UFS_UFS_DBG_RD_DESC_RAM = 0x1500,
|
||||
UFS_UFS_DBG_RD_PRDT_RAM = 0x1700,
|
||||
UFS_UFS_DBG_RD_RESP_RAM = 0x1800,
|
||||
UFS_UFS_DBG_RD_EDTL_RAM = 0x1900,
|
||||
};
|
||||
|
||||
/* bit definitions for REG_UFS_CFG2 register */
|
||||
#define UAWM_HW_CGC_EN (1 << 0)
|
||||
#define UARM_HW_CGC_EN (1 << 1)
|
||||
#define TXUC_HW_CGC_EN (1 << 2)
|
||||
#define RXUC_HW_CGC_EN (1 << 3)
|
||||
#define DFC_HW_CGC_EN (1 << 4)
|
||||
#define TRLUT_HW_CGC_EN (1 << 5)
|
||||
#define TMRLUT_HW_CGC_EN (1 << 6)
|
||||
#define OCSC_HW_CGC_EN (1 << 7)
|
||||
|
||||
#define REG_UFS_CFG2_CGC_EN_ALL (UAWM_HW_CGC_EN | UARM_HW_CGC_EN |\
|
||||
TXUC_HW_CGC_EN | RXUC_HW_CGC_EN |\
|
||||
DFC_HW_CGC_EN | TRLUT_HW_CGC_EN |\
|
||||
TMRLUT_HW_CGC_EN | OCSC_HW_CGC_EN)
|
||||
|
||||
/* bit offset */
|
||||
enum {
|
||||
OFFSET_UFS_PHY_SOFT_RESET = 1,
|
||||
OFFSET_CLK_NS_REG = 10,
|
||||
};
|
||||
|
||||
/* bit masks */
|
||||
enum {
|
||||
MASK_UFS_PHY_SOFT_RESET = 0x2,
|
||||
MASK_TX_SYMBOL_CLK_1US_REG = 0x3FF,
|
||||
MASK_CLK_NS_REG = 0xFFFC00,
|
||||
};
|
||||
|
||||
enum ufs_qcom_phy_init_type {
|
||||
UFS_PHY_INIT_FULL,
|
||||
UFS_PHY_INIT_CFG_RESTORE,
|
||||
};
|
||||
|
||||
static inline void
|
||||
ufs_qcom_get_controller_revision(struct ufs_hba *hba,
|
||||
u8 *major, u16 *minor, u16 *step)
|
||||
{
|
||||
u32 ver = ufshcd_readl(hba, REG_UFS_HW_VERSION);
|
||||
|
||||
*major = (ver & UFS_HW_VER_MAJOR_MASK) >> UFS_HW_VER_MAJOR_SHFT;
|
||||
*minor = (ver & UFS_HW_VER_MINOR_MASK) >> UFS_HW_VER_MINOR_SHFT;
|
||||
*step = (ver & UFS_HW_VER_STEP_MASK) >> UFS_HW_VER_STEP_SHFT;
|
||||
};
|
||||
|
||||
static inline void ufs_qcom_assert_reset(struct ufs_hba *hba)
|
||||
{
|
||||
ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET,
|
||||
1 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1);
|
||||
|
||||
/*
|
||||
* Make sure assertion of ufs phy reset is written to
|
||||
* register before returning
|
||||
*/
|
||||
mb();
|
||||
}
|
||||
|
||||
static inline void ufs_qcom_deassert_reset(struct ufs_hba *hba)
|
||||
{
|
||||
ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET,
|
||||
0 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1);
|
||||
|
||||
/*
|
||||
* Make sure de-assertion of ufs phy reset is written to
|
||||
* register before returning
|
||||
*/
|
||||
mb();
|
||||
}
|
||||
|
||||
struct ufs_qcom_bus_vote {
|
||||
uint32_t client_handle;
|
||||
uint32_t curr_vote;
|
||||
int min_bw_vote;
|
||||
int max_bw_vote;
|
||||
int saved_vote;
|
||||
bool is_max_bw_needed;
|
||||
struct device_attribute max_bus_bw;
|
||||
};
|
||||
|
||||
struct ufs_qcom_host {
|
||||
struct phy *generic_phy;
|
||||
struct ufs_hba *hba;
|
||||
struct ufs_qcom_bus_vote bus_vote;
|
||||
struct ufs_pa_layer_attr dev_req_params;
|
||||
struct clk *rx_l0_sync_clk;
|
||||
struct clk *tx_l0_sync_clk;
|
||||
struct clk *rx_l1_sync_clk;
|
||||
struct clk *tx_l1_sync_clk;
|
||||
bool is_lane_clks_enabled;
|
||||
};
|
||||
|
||||
#define ufs_qcom_is_link_off(hba) ufshcd_is_link_off(hba)
|
||||
#define ufs_qcom_is_link_active(hba) ufshcd_is_link_active(hba)
|
||||
#define ufs_qcom_is_link_hibern8(hba) ufshcd_is_link_hibern8(hba)
|
||||
|
||||
#endif /* UFS_QCOM_H_ */
|
Загрузка…
Ссылка в новой задаче