From 0efc0f6ec2d6c6497e401df171705c5762f5a061 Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Tue, 25 Feb 2014 15:40:30 +0200
Subject: [PATCH 01/10] ARM: OMAP3: PRM: move prcm wakeup helper to prm driver

Done in preparation to make the prm an individual driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/pm34xx.c  | 66 ++++++-----------------------------
 arch/arm/mach-omap2/prm3xxx.c | 53 ++++++++++++++++++++++++++++
 arch/arm/mach-omap2/prm3xxx.h |  1 +
 3 files changed, 64 insertions(+), 56 deletions(-)

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 507d8eeaab95..74d03f26d962 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -133,60 +133,13 @@ static void omap3_save_secure_ram_context(void)
 	}
 }
 
-/*
- * PRCM Interrupt Handler Helper Function
- *
- * The purpose of this function is to clear any wake-up events latched
- * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
- * may occur whilst attempting to clear a PM_WKST_x register and thus
- * set another bit in this register. A while loop is used to ensure
- * that any peripheral wake-up events occurring while attempting to
- * clear the PM_WKST_x are detected and cleared.
- */
-static int prcm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
-{
-	u32 wkst, fclk, iclk, clken;
-	u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
-	u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
-	u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
-	u16 grpsel_off = (regs == 3) ?
-		OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
-	int c = 0;
-
-	wkst = omap2_prm_read_mod_reg(module, wkst_off);
-	wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
-	wkst &= ~ignore_bits;
-	if (wkst) {
-		iclk = omap2_cm_read_mod_reg(module, iclk_off);
-		fclk = omap2_cm_read_mod_reg(module, fclk_off);
-		while (wkst) {
-			clken = wkst;
-			omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
-			/*
-			 * For USBHOST, we don't know whether HOST1 or
-			 * HOST2 woke us up, so enable both f-clocks
-			 */
-			if (module == OMAP3430ES2_USBHOST_MOD)
-				clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
-			omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
-			omap2_prm_write_mod_reg(wkst, module, wkst_off);
-			wkst = omap2_prm_read_mod_reg(module, wkst_off);
-			wkst &= ~ignore_bits;
-			c++;
-		}
-		omap2_cm_write_mod_reg(iclk, module, iclk_off);
-		omap2_cm_write_mod_reg(fclk, module, fclk_off);
-	}
-
-	return c;
-}
-
 static irqreturn_t _prcm_int_handle_io(int irq, void *unused)
 {
 	int c;
 
-	c = prcm_clear_mod_irqs(WKUP_MOD, 1,
-		~(OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK));
+	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
+					~(OMAP3430_ST_IO_MASK |
+					  OMAP3430_ST_IO_CHAIN_MASK));
 
 	return c ? IRQ_HANDLED : IRQ_NONE;
 }
@@ -200,13 +153,14 @@ static irqreturn_t _prcm_int_handle_wakeup(int irq, void *unused)
 	 * these are handled in a separate handler to avoid acking
 	 * IO events before parsing in mux code
 	 */
-	c = prcm_clear_mod_irqs(WKUP_MOD, 1,
-		OMAP3430_ST_IO_MASK | OMAP3430_ST_IO_CHAIN_MASK);
-	c += prcm_clear_mod_irqs(CORE_MOD, 1, 0);
-	c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
+	c = omap3xxx_prm_clear_mod_irqs(WKUP_MOD, 1,
+					OMAP3430_ST_IO_MASK |
+					OMAP3430_ST_IO_CHAIN_MASK);
+	c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 1, 0);
+	c += omap3xxx_prm_clear_mod_irqs(OMAP3430_PER_MOD, 1, 0);
 	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		c += prcm_clear_mod_irqs(CORE_MOD, 3, 0);
-		c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
+		c += omap3xxx_prm_clear_mod_irqs(CORE_MOD, 3, 0);
+		c += omap3xxx_prm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1, 0);
 	}
 
 	return c ? IRQ_HANDLED : IRQ_NONE;
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 4bd7a2dca8af..014ba70d2dfb 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -26,6 +26,8 @@
 #include "prm2xxx_3xxx.h"
 #include "cm2xxx_3xxx.h"
 #include "prm-regbits-34xx.h"
+#include "cm3xxx.h"
+#include "cm-regbits-34xx.h"
 
 static const struct omap_prcm_irq omap3_prcm_irqs[] = {
 	OMAP_PRCM_IRQ("wkup",	0,	0),
@@ -205,6 +207,57 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask)
 				OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 }
 
+/**
+ * omap3xxx_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt
+ * @module: PRM module to clear wakeups from
+ * @regs: register set to clear, 1 or 3
+ * @ignore_bits: wakeup status bits to ignore
+ *
+ * The purpose of this function is to clear any wake-up events latched
+ * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
+ * may occur whilst attempting to clear a PM_WKST_x register and thus
+ * set another bit in this register. A while loop is used to ensure
+ * that any peripheral wake-up events occurring while attempting to
+ * clear the PM_WKST_x are detected and cleared.
+ */
+int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
+{
+	u32 wkst, fclk, iclk, clken;
+	u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
+	u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
+	u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
+	u16 grpsel_off = (regs == 3) ?
+		OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
+	int c = 0;
+
+	wkst = omap2_prm_read_mod_reg(module, wkst_off);
+	wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
+	wkst &= ~ignore_bits;
+	if (wkst) {
+		iclk = omap2_cm_read_mod_reg(module, iclk_off);
+		fclk = omap2_cm_read_mod_reg(module, fclk_off);
+		while (wkst) {
+			clken = wkst;
+			omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
+			/*
+			 * For USBHOST, we don't know whether HOST1 or
+			 * HOST2 woke us up, so enable both f-clocks
+			 */
+			if (module == OMAP3430ES2_USBHOST_MOD)
+				clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
+			omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
+			omap2_prm_write_mod_reg(wkst, module, wkst_off);
+			wkst = omap2_prm_read_mod_reg(module, wkst_off);
+			wkst &= ~ignore_bits;
+			c++;
+		}
+		omap2_cm_write_mod_reg(iclk, module, iclk_off);
+		omap2_cm_write_mod_reg(fclk, module, fclk_off);
+	}
+
+	return c;
+}
+
 /**
  * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
  *
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 1dacfc5b1959..14a5fbc8ac57 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -162,6 +162,7 @@ extern void omap3xxx_prm_dpll3_reset(void);
 
 extern int __init omap3xxx_prm_init(void);
 extern u32 omap3xxx_prm_get_reset_sources(void);
+int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
 
 #endif /* __ASSEMBLER */
 

From 9de367fae0d9907e19d065e0381ecd3f4003e08f Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Tue, 25 Feb 2014 18:04:56 +0200
Subject: [PATCH 02/10] ARM: OMAP3: PRM: move iva reset to PRM driver

This is a more proper isolation of the code. Done in preparation of making
PRM an individual driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/pm34xx.c  | 49 +----------------------------------
 arch/arm/mach-omap2/prm3xxx.c | 45 ++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/prm3xxx.h |  1 +
 3 files changed, 47 insertions(+), 48 deletions(-)

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 74d03f26d962..6d02573ac4c0 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -353,53 +353,6 @@ restore:
 #define omap3_pm_suspend NULL
 #endif /* CONFIG_SUSPEND */
 
-
-/**
- * omap3_iva_idle(): ensure IVA is in idle so it can be put into
- *                   retention
- *
- * In cases where IVA2 is activated by bootcode, it may prevent
- * full-chip retention or off-mode because it is not idle.  This
- * function forces the IVA2 into idle state so it can go
- * into retention/off and thus allow full-chip retention/off.
- *
- **/
-static void __init omap3_iva_idle(void)
-{
-	/* ensure IVA2 clock is disabled */
-	omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
-
-	/* if no clock activity, nothing else to do */
-	if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
-	      OMAP3430_CLKACTIVITY_IVA2_MASK))
-		return;
-
-	/* Reset IVA2 */
-	omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
-			  OMAP3430_RST2_IVA2_MASK |
-			  OMAP3430_RST3_IVA2_MASK,
-			  OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
-	/* Enable IVA2 clock */
-	omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
-			 OMAP3430_IVA2_MOD, CM_FCLKEN);
-
-	/* Set IVA2 boot mode to 'idle' */
-	omap3_ctrl_set_iva_bootmode_idle();
-
-	/* Un-reset IVA2 */
-	omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
-	/* Disable IVA2 clock */
-	omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
-
-	/* Reset IVA2 */
-	omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
-			  OMAP3430_RST2_IVA2_MASK |
-			  OMAP3430_RST3_IVA2_MASK,
-			  OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-}
-
 static void __init omap3_d2d_idle(void)
 {
 	u16 mask, padconf;
@@ -503,7 +456,7 @@ static void __init prcm_setup_regs(void)
 	/*
 	 * We need to idle iva2_pwrdm even on am3703 with no iva2.
 	 */
-	omap3_iva_idle();
+	omap3xxx_prm_iva_idle();
 
 	omap3_d2d_idle();
 }
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 014ba70d2dfb..a575b6964bf9 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -28,6 +28,7 @@
 #include "prm-regbits-34xx.h"
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
+#include "control.h"
 
 static const struct omap_prcm_irq omap3_prcm_irqs[] = {
 	OMAP_PRCM_IRQ("wkup",	0,	0),
@@ -329,6 +330,50 @@ static u32 omap3xxx_prm_read_reset_sources(void)
 	return r;
 }
 
+/**
+ * omap3xxx_prm_iva_idle - ensure IVA is in idle so it can be put into retention
+ *
+ * In cases where IVA2 is activated by bootcode, it may prevent
+ * full-chip retention or off-mode because it is not idle.  This
+ * function forces the IVA2 into idle state so it can go
+ * into retention/off and thus allow full-chip retention/off.
+ */
+void omap3xxx_prm_iva_idle(void)
+{
+	/* ensure IVA2 clock is disabled */
+	omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* if no clock activity, nothing else to do */
+	if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
+	      OMAP3430_CLKACTIVITY_IVA2_MASK))
+		return;
+
+	/* Reset IVA2 */
+	omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+				OMAP3430_RST2_IVA2_MASK |
+				OMAP3430_RST3_IVA2_MASK,
+				OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+
+	/* Enable IVA2 clock */
+	omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
+			       OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* Set IVA2 boot mode to 'idle' */
+	omap3_ctrl_set_iva_bootmode_idle();
+
+	/* Un-reset IVA2 */
+	omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+
+	/* Disable IVA2 clock */
+	omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+	/* Reset IVA2 */
+	omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+				OMAP3430_RST2_IVA2_MASK |
+				OMAP3430_RST3_IVA2_MASK,
+				OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+}
+
 /* Powerdomain low-level functions */
 
 static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 14a5fbc8ac57..007ff59602fd 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -163,6 +163,7 @@ extern void omap3xxx_prm_dpll3_reset(void);
 extern int __init omap3xxx_prm_init(void);
 extern u32 omap3xxx_prm_get_reset_sources(void);
 int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
+void omap3xxx_prm_iva_idle(void);
 
 #endif /* __ASSEMBLER */
 

From 55c6c3ad90f606d458d798b36f8ffca98c1894e0 Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Tue, 4 Mar 2014 15:48:33 +0200
Subject: [PATCH 03/10] ARM: OMAP3: PRM: move modem reset to PRM driver

This is a more proper isolation of the code. Done in preparation of making
PRM an individual driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/pm34xx.c  |  5 +----
 arch/arm/mach-omap2/prm3xxx.c | 15 +++++++++++++++
 arch/arm/mach-omap2/prm3xxx.h |  1 +
 3 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 6d02573ac4c0..acb895deb3cc 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -371,10 +371,7 @@ static void __init omap3_d2d_idle(void)
 	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
 
 	/* reset modem */
-	omap2_prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
-			  OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
-			  CORE_MOD, OMAP2_RM_RSTCTRL);
-	omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
+	omap3_prm_reset_modem();
 }
 
 static void __init prcm_setup_regs(void)
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index a575b6964bf9..e46ff7184c9d 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -259,6 +259,21 @@ int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits)
 	return c;
 }
 
+/**
+ * omap3_prm_reset_modem - toggle reset signal for modem
+ *
+ * Toggles the reset signal to modem IP block. Required to allow
+ * OMAP3430 without stacked modem to idle properly.
+ */
+void __init omap3_prm_reset_modem(void)
+{
+	omap2_prm_write_mod_reg(
+		OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
+		OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
+				CORE_MOD, OMAP2_RM_RSTCTRL);
+	omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
+}
+
 /**
  * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
  *
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 007ff59602fd..21eb1d5ba524 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -164,6 +164,7 @@ extern int __init omap3xxx_prm_init(void);
 extern u32 omap3xxx_prm_get_reset_sources(void);
 int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
 void omap3xxx_prm_iva_idle(void);
+void omap3_prm_reset_modem(void);
 
 #endif /* __ASSEMBLER */
 

From 9efcea09b0b56488e46ab3a36fe8dbce9eded529 Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Wed, 26 Feb 2014 11:54:29 +0200
Subject: [PATCH 04/10] ARM: OMAP3: PRM: add API for checking and clearing cold
 reset status

This isolates the PRM register access within the PRM driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/control.c |  6 +-----
 arch/arm/mach-omap2/prm3xxx.c | 20 ++++++++++++++++++++
 arch/arm/mach-omap2/prm3xxx.h |  1 +
 3 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 751f3549bf6f..f8eb3e4354ad 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -282,13 +282,9 @@ void omap3_clear_scratchpad_contents(void)
 	void __iomem *v_addr;
 	u32 offset = 0;
 	v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
-	if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
-	    OMAP3430_GLOBAL_COLD_RST_MASK) {
+	if (omap3xxx_prm_clear_global_cold_reset()) {
 		for ( ; offset <= max_offset; offset += 0x4)
 			writel_relaxed(0x0, (v_addr + offset));
-		omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
-					   OMAP3430_GR_MOD,
-					   OMAP3_PRM_RSTST_OFFSET);
 	}
 }
 
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index e46ff7184c9d..4733c28d9d64 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -389,6 +389,26 @@ void omap3xxx_prm_iva_idle(void)
 				OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 }
 
+/**
+ * omap3xxx_prm_clear_global_cold_reset - checks the global cold reset status
+ *					  and clears it if asserted
+ *
+ * Checks if cold-reset has occurred and clears the status bit if yes. Returns
+ * 1 if cold-reset has occurred, 0 otherwise.
+ */
+int omap3xxx_prm_clear_global_cold_reset(void)
+{
+	if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
+	    OMAP3430_GLOBAL_COLD_RST_MASK) {
+		omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
+					   OMAP3430_GR_MOD,
+					   OMAP3_PRM_RSTST_OFFSET);
+		return 1;
+	}
+
+	return 0;
+}
+
 /* Powerdomain low-level functions */
 
 static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 21eb1d5ba524..7548ae0e86d5 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -165,6 +165,7 @@ extern u32 omap3xxx_prm_get_reset_sources(void);
 int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
 void omap3xxx_prm_iva_idle(void);
 void omap3_prm_reset_modem(void);
+int omap3xxx_prm_clear_global_cold_reset(void);
 
 #endif /* __ASSEMBLER */
 

From 7e28b465fdea3f0601a1c76e47c50d05c7c603e2 Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Wed, 26 Feb 2014 12:00:16 +0200
Subject: [PATCH 05/10] ARM: OMAP3: PRM: add API for saving PRM scratchpad
 contents

This isolates the PRM register access within the PRM driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/control.c | 11 ++---------
 arch/arm/mach-omap2/prm3xxx.c |  9 +++++++++
 arch/arm/mach-omap2/prm3xxx.h |  1 +
 3 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index f8eb3e4354ad..83080949d0d3 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -44,8 +44,7 @@ struct omap3_scratchpad {
 };
 
 struct omap3_scratchpad_prcm_block {
-	u32 prm_clksrc_ctrl;
-	u32 prm_clksel;
+	u32 prm_contents[2];
 	u32 cm_contents[11];
 	u32 prcm_block_size;
 };
@@ -327,13 +326,7 @@ void omap3_save_scratchpad_contents(void)
 	scratchpad_contents.sdrc_block_offset = 0x64;
 
 	/* Populate the PRCM block contents */
-	prcm_block_contents.prm_clksrc_ctrl =
-		omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
-				       OMAP3_PRM_CLKSRC_CTRL_OFFSET);
-	prcm_block_contents.prm_clksel =
-		omap2_prm_read_mod_reg(OMAP3430_CCR_MOD,
-				       OMAP3_PRM_CLKSEL_OFFSET);
-
+	omap3_prm_save_scratchpad_contents(prcm_block_contents.prm_contents);
 	omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents);
 
 	prcm_block_contents.prcm_block_size = 0x0;
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 4733c28d9d64..4d93b844bcc4 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -409,6 +409,15 @@ int omap3xxx_prm_clear_global_cold_reset(void)
 	return 0;
 }
 
+void omap3_prm_save_scratchpad_contents(u32 *ptr)
+{
+	*ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
+					OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+	*ptr++ = omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
+					OMAP3_PRM_CLKSEL_OFFSET);
+}
+
 /* Powerdomain low-level functions */
 
 static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index 7548ae0e86d5..c5f9cbabb5bb 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -166,6 +166,7 @@ int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
 void omap3xxx_prm_iva_idle(void);
 void omap3_prm_reset_modem(void);
 int omap3xxx_prm_clear_global_cold_reset(void);
+void omap3_prm_save_scratchpad_contents(u32 *ptr);
 
 #endif /* __ASSEMBLER */
 

From 6bdc4b44b3acc95655b061a88c951c6d9742d8e3 Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Wed, 26 Feb 2014 15:31:05 +0200
Subject: [PATCH 06/10] ARM: OMAP24xx: PRM: add API for clearing wakeup status
 bits

This helps to isolate the PRM into its own driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/pm24xx.c  | 31 +++++++++++++------------------
 arch/arm/mach-omap2/prm2xxx.c | 18 ++++++++++++++++++
 arch/arm/mach-omap2/prm2xxx.h |  1 +
 3 files changed, 32 insertions(+), 18 deletions(-)

diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index a5ea988ff340..d76694b7a591 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -75,9 +75,9 @@ static int omap2_enter_full_retention(void)
 
 	/* Clear old wake-up events */
 	/* REVISIT: These write to reserved bits? */
-	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
-	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
-	omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+	omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+	omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+	omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
 
 	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
 	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
@@ -104,23 +104,18 @@ no_sleep:
 	clk_enable(osc_ck);
 
 	/* clear CORE wake-up events */
-	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
-	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+	omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+	omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
 
 	/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
-	omap2_prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
+	omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, 0x4 | 0x1);
 
 	/* MPU domain wake events */
-	l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
-	if (l & 0x01)
-		omap2_prm_write_mod_reg(0x01, OCP_MOD,
-				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
-	if (l & 0x20)
-		omap2_prm_write_mod_reg(0x20, OCP_MOD,
-				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+	omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
+				    0x1);
 
-	/* Mask future PRCM-to-MPU interrupts */
-	omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+	omap2xxx_prm_clear_mod_irqs(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET,
+				    0x20);
 
 	pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
 	pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_ON);
@@ -148,9 +143,9 @@ static void omap2_enter_mpu_retention(void)
 	 * it is in retention mode. */
 	if (omap2_allow_mpu_retention()) {
 		/* REVISIT: These write to reserved bits? */
-		omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
-		omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
-		omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+		omap2xxx_prm_clear_mod_irqs(CORE_MOD, PM_WKST1, ~0);
+		omap2xxx_prm_clear_mod_irqs(CORE_MOD, OMAP24XX_PM_WKST2, ~0);
+		omap2xxx_prm_clear_mod_irqs(WKUP_MOD, PM_WKST, ~0);
 
 		/* Try to enter MPU retention */
 		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
index a3a3cca2bcc4..86958050547a 100644
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -114,6 +114,24 @@ void omap2xxx_prm_dpll_reset(void)
 	omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTCTRL);
 }
 
+/**
+ * omap2xxx_prm_clear_mod_irqs - clear wakeup status bits for a module
+ * @module: PRM module to clear wakeups from
+ * @regs: register offset to clear
+ * @wkst_mask: wakeup status mask to clear
+ *
+ * Clears wakeup status bits for a given module, so that the device can
+ * re-enter idle.
+ */
+void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask)
+{
+	u32 wkst;
+
+	wkst = omap2_prm_read_mod_reg(module, regs);
+	wkst &= wkst_mask;
+	omap2_prm_write_mod_reg(wkst, module, regs);
+}
+
 int omap2xxx_clkdm_sleep(struct clockdomain *clkdm)
 {
 	omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
index d2cb6365716f..d73414139292 100644
--- a/arch/arm/mach-omap2/prm2xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx.h
@@ -125,6 +125,7 @@ extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
 extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
 
 extern void omap2xxx_prm_dpll_reset(void);
+void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
 
 extern int __init omap2xxx_prm_init(void);
 

From c5180a2b3e26d9b82277986f830c89a50103e65a Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Wed, 26 Feb 2014 17:30:43 +0200
Subject: [PATCH 07/10] ARM: OMAP3: PRM: move PRM init code from PM core to the
 driver

Helps to isolate the PRM driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/pm34xx.c  | 71 +--------------------------
 arch/arm/mach-omap2/prm3xxx.c | 90 +++++++++++++++++++++++++++++++++++
 arch/arm/mach-omap2/prm3xxx.h |  1 +
 3 files changed, 92 insertions(+), 70 deletions(-)

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index acb895deb3cc..3ea04ac10d16 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -376,79 +376,10 @@ static void __init omap3_d2d_idle(void)
 
 static void __init prcm_setup_regs(void)
 {
-	u32 omap3630_en_uart4_mask = cpu_is_omap3630() ?
-					OMAP3630_EN_UART4_MASK : 0;
-	u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
-					OMAP3630_GRPSEL_UART4_MASK : 0;
-
 	/* XXX This should be handled by hwmod code or SCM init code */
 	omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
 
-	/*
-	 * Enable control of expternal oscillator through
-	 * sys_clkreq. In the long run clock framework should
-	 * take care of this.
-	 */
-	omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
-			     1 << OMAP_AUTOEXTCLKMODE_SHIFT,
-			     OMAP3430_GR_MOD,
-			     OMAP3_PRM_CLKSRC_CTRL_OFFSET);
-
-	/* setup wakup source */
-	omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
-			  OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
-			  WKUP_MOD, PM_WKEN);
-	/* No need to write EN_IO, that is always enabled */
-	omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
-			  OMAP3430_GRPSEL_GPT1_MASK |
-			  OMAP3430_GRPSEL_GPT12_MASK,
-			  WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
-
-	/* Enable PM_WKEN to support DSS LPR */
-	omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
-				OMAP3430_DSS_MOD, PM_WKEN);
-
-	/* Enable wakeups in PER */
-	omap2_prm_write_mod_reg(omap3630_en_uart4_mask |
-			  OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
-			  OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
-			  OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
-			  OMAP3430_EN_MCBSP2_MASK | OMAP3430_EN_MCBSP3_MASK |
-			  OMAP3430_EN_MCBSP4_MASK,
-			  OMAP3430_PER_MOD, PM_WKEN);
-	/* and allow them to wake up MPU */
-	omap2_prm_write_mod_reg(omap3630_grpsel_uart4_mask |
-			  OMAP3430_GRPSEL_GPIO2_MASK |
-			  OMAP3430_GRPSEL_GPIO3_MASK |
-			  OMAP3430_GRPSEL_GPIO4_MASK |
-			  OMAP3430_GRPSEL_GPIO5_MASK |
-			  OMAP3430_GRPSEL_GPIO6_MASK |
-			  OMAP3430_GRPSEL_UART3_MASK |
-			  OMAP3430_GRPSEL_MCBSP2_MASK |
-			  OMAP3430_GRPSEL_MCBSP3_MASK |
-			  OMAP3430_GRPSEL_MCBSP4_MASK,
-			  OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
-
-	/* Don't attach IVA interrupts */
-	if (omap3_has_iva()) {
-		omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
-		omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
-		omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
-		omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD,
-					OMAP3430_PM_IVAGRPSEL);
-	}
-
-	/* Clear any pending 'reset' flags */
-	omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
-	omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, OMAP2_RM_RSTST);
-
-	/* Clear any pending PRCM interrupts */
-	omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	omap3_prm_init_pm(cpu_is_omap3630(), omap3_has_iva());
 
 	/*
 	 * We need to idle iva2_pwrdm even on am3703 with no iva2.
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 4d93b844bcc4..48218a450cb0 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -274,6 +274,96 @@ void __init omap3_prm_reset_modem(void)
 	omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
 }
 
+/**
+ * omap3_prm_init_pm - initialize PM related registers for PRM
+ * @has_uart4: SoC has UART4
+ * @has_iva: SoC has IVA
+ *
+ * Initializes PRM registers for PM use. Called from PM init.
+ */
+void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
+{
+	u32 en_uart4_mask;
+	u32 grpsel_uart4_mask;
+
+	/*
+	 * Enable control of expternal oscillator through
+	 * sys_clkreq. In the long run clock framework should
+	 * take care of this.
+	 */
+	omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
+				   1 << OMAP_AUTOEXTCLKMODE_SHIFT,
+				   OMAP3430_GR_MOD,
+				   OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+	/* setup wakup source */
+	omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
+				OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
+				WKUP_MOD, PM_WKEN);
+	/* No need to write EN_IO, that is always enabled */
+	omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
+				OMAP3430_GRPSEL_GPT1_MASK |
+				OMAP3430_GRPSEL_GPT12_MASK,
+				WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+
+	/* Enable PM_WKEN to support DSS LPR */
+	omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
+				OMAP3430_DSS_MOD, PM_WKEN);
+
+	if (has_uart4) {
+		en_uart4_mask = OMAP3630_EN_UART4_MASK;
+		grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK;
+	}
+
+	/* Enable wakeups in PER */
+	omap2_prm_write_mod_reg(en_uart4_mask |
+				OMAP3430_EN_GPIO2_MASK |
+				OMAP3430_EN_GPIO3_MASK |
+				OMAP3430_EN_GPIO4_MASK |
+				OMAP3430_EN_GPIO5_MASK |
+				OMAP3430_EN_GPIO6_MASK |
+				OMAP3430_EN_UART3_MASK |
+				OMAP3430_EN_MCBSP2_MASK |
+				OMAP3430_EN_MCBSP3_MASK |
+				OMAP3430_EN_MCBSP4_MASK,
+				OMAP3430_PER_MOD, PM_WKEN);
+
+	/* and allow them to wake up MPU */
+	omap2_prm_write_mod_reg(grpsel_uart4_mask |
+				OMAP3430_GRPSEL_GPIO2_MASK |
+				OMAP3430_GRPSEL_GPIO3_MASK |
+				OMAP3430_GRPSEL_GPIO4_MASK |
+				OMAP3430_GRPSEL_GPIO5_MASK |
+				OMAP3430_GRPSEL_GPIO6_MASK |
+				OMAP3430_GRPSEL_UART3_MASK |
+				OMAP3430_GRPSEL_MCBSP2_MASK |
+				OMAP3430_GRPSEL_MCBSP3_MASK |
+				OMAP3430_GRPSEL_MCBSP4_MASK,
+				OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
+
+	/* Don't attach IVA interrupts */
+	if (has_iva) {
+		omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+		omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+		omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+		omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD,
+					OMAP3430_PM_IVAGRPSEL);
+	}
+
+	/* Clear any pending 'reset' flags */
+	omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
+	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
+	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
+	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
+	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
+	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
+	omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD,
+				OMAP2_RM_RSTST);
+
+	/* Clear any pending PRCM interrupts */
+	omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+}
+
 /**
  * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
  *
diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h
index c5f9cbabb5bb..bc37d42a8704 100644
--- a/arch/arm/mach-omap2/prm3xxx.h
+++ b/arch/arm/mach-omap2/prm3xxx.h
@@ -167,6 +167,7 @@ void omap3xxx_prm_iva_idle(void);
 void omap3_prm_reset_modem(void);
 int omap3xxx_prm_clear_global_cold_reset(void);
 void omap3_prm_save_scratchpad_contents(u32 *ptr);
+void omap3_prm_init_pm(bool has_uart4, bool has_iva);
 
 #endif /* __ASSEMBLER */
 

From bbd36f9f03eceee5c208db83049142171e6338f6 Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Tue, 4 Mar 2014 17:17:06 +0200
Subject: [PATCH 08/10] ARM: OMAP3: control: add API for setting up the modem
 pads

This patch moves the functionality from PM core to control driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/control.c | 26 ++++++++++++++++++++++++++
 arch/arm/mach-omap2/control.h |  1 +
 arch/arm/mach-omap2/pm34xx.c  | 15 +--------------
 3 files changed, 28 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 83080949d0d3..f432ffc0deb2 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -569,4 +569,30 @@ void omap3_ctrl_set_iva_bootmode_idle(void)
 	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
 			 OMAP343X_CONTROL_IVA2_BOOTMOD);
 }
+
+/**
+ * omap3_ctrl_setup_d2d_padconf - setup stacked modem pads for idle
+ *
+ * Sets up the pads controlling the stacked modem in such way that the
+ * device can enter idle.
+ */
+void omap3_ctrl_setup_d2d_padconf(void)
+{
+	u16 mask, padconf;
+
+	/*
+	 * In a stand alone OMAP3430 where there is not a stacked
+	 * modem for the D2D Idle Ack and D2D MStandby must be pulled
+	 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
+	 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up.
+	 */
+	mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
+	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
+	padconf |= mask;
+	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
+
+	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
+	padconf |= mask;
+	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+}
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index da054801b114..fc001587ebf5 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -428,6 +428,7 @@ extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
 extern void omap3_ctrl_set_iva_bootmode_idle(void);
+void omap3_ctrl_setup_d2d_padconf(void);
 extern void omap2_set_globals_control(void __iomem *ctrl,
 				      void __iomem *ctrl_pad);
 #else
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 3ea04ac10d16..126f3ec2d174 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -355,20 +355,7 @@ restore:
 
 static void __init omap3_d2d_idle(void)
 {
-	u16 mask, padconf;
-
-	/* In a stand alone OMAP3430 where there is not a stacked
-	 * modem for the D2D Idle Ack and D2D MStandby must be pulled
-	 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
-	 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
-	mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
-	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
-	padconf |= mask;
-	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
-
-	padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
-	padconf |= mask;
-	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+	omap3_ctrl_setup_d2d_padconf();
 
 	/* reset modem */
 	omap3_prm_reset_modem();

From c2148e5930cdd2dd964e18fb7057c1e07f63c363 Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Tue, 4 Mar 2014 17:24:21 +0200
Subject: [PATCH 09/10] ARM: OMAP3: PRM: move modem reset and iva2 idle to PRM
 driver

Done in preparation to move PRM into its own driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/pm34xx.c  | 15 ---------------
 arch/arm/mach-omap2/prm3xxx.c |  7 +++++++
 2 files changed, 7 insertions(+), 15 deletions(-)

diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 126f3ec2d174..9410b4a5c252 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -353,27 +353,12 @@ restore:
 #define omap3_pm_suspend NULL
 #endif /* CONFIG_SUSPEND */
 
-static void __init omap3_d2d_idle(void)
-{
-	omap3_ctrl_setup_d2d_padconf();
-
-	/* reset modem */
-	omap3_prm_reset_modem();
-}
-
 static void __init prcm_setup_regs(void)
 {
 	/* XXX This should be handled by hwmod code or SCM init code */
 	omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
 
 	omap3_prm_init_pm(cpu_is_omap3630(), omap3_has_iva());
-
-	/*
-	 * We need to idle iva2_pwrdm even on am3703 with no iva2.
-	 */
-	omap3xxx_prm_iva_idle();
-
-	omap3_d2d_idle();
 }
 
 void omap3_pm_off_mode_enable(int enable)
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 48218a450cb0..75dfe8efdfe0 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -362,6 +362,13 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
 
 	/* Clear any pending PRCM interrupts */
 	omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+	/* We need to idle iva2_pwrdm even on am3703 with no iva2. */
+	omap3xxx_prm_iva_idle();
+
+	omap3_ctrl_setup_d2d_padconf();
+
+	omap3_prm_reset_modem();
 }
 
 /**

From ba12c24286296159a1271eb19f2fc5c2ef59fbde Mon Sep 17 00:00:00 2001
From: Tero Kristo <t-kristo@ti.com>
Date: Tue, 4 Mar 2014 17:43:04 +0200
Subject: [PATCH 10/10] ARM: OMAP3: control: isolate control module init to its
 own function

Control module related PM initializations are now moved within control
module driver. Done in preparation to isolate the code to its own driver.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
---
 arch/arm/mach-omap2/control.c | 19 +++++++++++++++++--
 arch/arm/mach-omap2/control.h |  3 +--
 arch/arm/mach-omap2/pm34xx.c  |  3 +--
 arch/arm/mach-omap2/prm3xxx.c |  6 ------
 4 files changed, 19 insertions(+), 12 deletions(-)

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index f432ffc0deb2..f4796c002070 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -564,7 +564,7 @@ int omap3_ctrl_save_padconf(void)
  * Sets the bootmode for IVA2 to idle. This is needed by the PM code to
  * force disable IVA2 so that it does not prevent any low-power states.
  */
-void omap3_ctrl_set_iva_bootmode_idle(void)
+static void __init omap3_ctrl_set_iva_bootmode_idle(void)
 {
 	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
 			 OMAP343X_CONTROL_IVA2_BOOTMOD);
@@ -576,7 +576,7 @@ void omap3_ctrl_set_iva_bootmode_idle(void)
  * Sets up the pads controlling the stacked modem in such way that the
  * device can enter idle.
  */
-void omap3_ctrl_setup_d2d_padconf(void)
+static void __init omap3_ctrl_setup_d2d_padconf(void)
 {
 	u16 mask, padconf;
 
@@ -595,4 +595,19 @@ void omap3_ctrl_setup_d2d_padconf(void)
 	padconf |= mask;
 	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
 }
+
+/**
+ * omap3_ctrl_init - does static initializations for control module
+ *
+ * Initializes system control module. This sets up the sysconfig autoidle,
+ * and sets up modem and iva2 so that they can be idled properly.
+ */
+void __init omap3_ctrl_init(void)
+{
+	omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
+
+	omap3_ctrl_set_iva_bootmode_idle();
+
+	omap3_ctrl_setup_d2d_padconf();
+}
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index fc001587ebf5..ccbd70ce4c97 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -427,8 +427,7 @@ extern void omap_ctrl_write_dsp_boot_addr(u32 bootaddr);
 extern void omap_ctrl_write_dsp_boot_mode(u8 bootmode);
 extern void omap3630_ctrl_disable_rta(void);
 extern int omap3_ctrl_save_padconf(void);
-extern void omap3_ctrl_set_iva_bootmode_idle(void);
-void omap3_ctrl_setup_d2d_padconf(void);
+void omap3_ctrl_init(void);
 extern void omap2_set_globals_control(void __iomem *ctrl,
 				      void __iomem *ctrl_pad);
 #else
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 9410b4a5c252..3f80929a5f7e 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -355,8 +355,7 @@ restore:
 
 static void __init prcm_setup_regs(void)
 {
-	/* XXX This should be handled by hwmod code or SCM init code */
-	omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
+	omap3_ctrl_init();
 
 	omap3_prm_init_pm(cpu_is_omap3630(), omap3_has_iva());
 }
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 75dfe8efdfe0..2458be6fc67b 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -28,7 +28,6 @@
 #include "prm-regbits-34xx.h"
 #include "cm3xxx.h"
 #include "cm-regbits-34xx.h"
-#include "control.h"
 
 static const struct omap_prcm_irq omap3_prcm_irqs[] = {
 	OMAP_PRCM_IRQ("wkup",	0,	0),
@@ -366,8 +365,6 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
 	/* We need to idle iva2_pwrdm even on am3703 with no iva2. */
 	omap3xxx_prm_iva_idle();
 
-	omap3_ctrl_setup_d2d_padconf();
-
 	omap3_prm_reset_modem();
 }
 
@@ -470,9 +467,6 @@ void omap3xxx_prm_iva_idle(void)
 	omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
 			       OMAP3430_IVA2_MOD, CM_FCLKEN);
 
-	/* Set IVA2 boot mode to 'idle' */
-	omap3_ctrl_set_iva_bootmode_idle();
-
 	/* Un-reset IVA2 */
 	omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);