diff --git a/Documentation/devicetree/bindings/arm/global_timer.txt b/Documentation/devicetree/bindings/arm/global_timer.txt
index 1e548981eda4..bdae3a818793 100644
--- a/Documentation/devicetree/bindings/arm/global_timer.txt
+++ b/Documentation/devicetree/bindings/arm/global_timer.txt
@@ -4,8 +4,11 @@
 
 ** Timer node required properties:
 
-- compatible : Should be "arm,cortex-a9-global-timer"
-		Driver supports versions r2p0 and above.
+- compatible : should contain
+	     * "arm,cortex-a5-global-timer" for Cortex-A5 global timers.
+	     * "arm,cortex-a9-global-timer" for Cortex-A9 global
+	         timers or any compatible implementation. Note: driver
+	         supports versions r2p0 and above.
 
 - interrupts : One interrupt to each core
 
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
index 7c26154b8bbb..27cfc7d7ccd7 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
@@ -9,6 +9,9 @@ Required properties:
 		one)
 - clocks: phandle to the source clock (usually the AHB clock)
 
+Optionnal properties:
+- resets: phandle to a reset controller asserting the timer
+
 Example:
 
 timer@01c60000 {
@@ -19,4 +22,5 @@ timer@01c60000 {
 		     <0 53 1>,
 		     <0 54 1>;
 	clocks = <&ahb1_gates 19>;
+	resets = <&ahb1rst 19>;
 };
diff --git a/Documentation/devicetree/bindings/timer/efm32,timer.txt b/Documentation/devicetree/bindings/timer/energymicro,efm32-timer.txt
similarity index 87%
rename from Documentation/devicetree/bindings/timer/efm32,timer.txt
rename to Documentation/devicetree/bindings/timer/energymicro,efm32-timer.txt
index 97a568f696c9..e502c11b2211 100644
--- a/Documentation/devicetree/bindings/timer/efm32,timer.txt
+++ b/Documentation/devicetree/bindings/timer/energymicro,efm32-timer.txt
@@ -6,7 +6,7 @@ channels and can be used as PWM or Quadrature Decoder. Available clock sources
 are the cpu's HFPERCLK (with a 10-bit prescaler) or an external pin.
 
 Required properties:
-- compatible : Should be efm32,timer
+- compatible : Should be "energymicro,efm32-timer"
 - reg : Address and length of the register set
 - clocks : Should contain a reference to the HFPERCLK
 
@@ -16,7 +16,7 @@ Optional properties:
 Example:
 
 timer@40010c00 {
-	compatible = "efm32,timer";
+	compatible = "energymicro,efm32-timer";
 	reg = <0x40010c00 0x400>;
 	interrupts = <14>;
 	clocks = <&cmu clk_HFPERCLKTIMER3>;
diff --git a/Documentation/devicetree/bindings/timer/fsl,ftm-timer.txt b/Documentation/devicetree/bindings/timer/fsl,ftm-timer.txt
new file mode 100644
index 000000000000..aa8c40230e5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/fsl,ftm-timer.txt
@@ -0,0 +1,31 @@
+Freescale FlexTimer Module (FTM) Timer
+
+Required properties:
+
+- compatible : should be "fsl,ftm-timer"
+- reg : Specifies base physical address and size of the register sets for the
+  clock event device and clock source device.
+- interrupts : Should be the clock event device interrupt.
+- clocks : The clocks provided by the SoC to drive the timer, must contain an
+  entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+  o "ftm-evt"
+  o "ftm-src"
+  o "ftm-evt-counter-en"
+  o "ftm-src-counter-en"
+- big-endian: One boolean property, the big endian mode will be in use if it is
+  present, or the little endian mode will be in use for all the device registers.
+
+Example:
+ftm: ftm@400b8000 {
+	compatible = "fsl,ftm-timer";
+	reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+	interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+	clock-names = "ftm-evt", "ftm-src",
+		"ftm-evt-counter-en", "ftm-src-counter-en";
+	clocks = <&clks VF610_CLK_FTM2>,
+		<&clks VF610_CLK_FTM3>,
+		<&clks VF610_CLK_FTM2_EXT_FIX_EN>,
+		<&clks VF610_CLK_FTM3_EXT_FIX_EN>;
+	big-endian;
+};
diff --git a/Documentation/timers/timer_stats.txt b/Documentation/timers/timer_stats.txt
index 8abd40b22b7f..de835ee97455 100644
--- a/Documentation/timers/timer_stats.txt
+++ b/Documentation/timers/timer_stats.txt
@@ -39,9 +39,9 @@ To stop a sample period issue:
 The statistics can be retrieved by:
 # cat /proc/timer_stats
 
-The readout of /proc/timer_stats automatically disables sampling. The sampled
-information is kept until a new sample period is started. This allows multiple
-readouts.
+While sampling is enabled, each readout from /proc/timer_stats will see
+newly updated statistics. Once sampling is disabled, the sampled information
+is kept until a new sample period is started. This allows multiple readouts.
 
 Sample output of /proc/timer_stats:
 
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 0f4ea4990d2c..a9dfa12eb735 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -621,6 +621,17 @@
 			status = "disabled";
 		};
 
+		timer@01c60000 {
+			compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <0 51 4>,
+				     <0 52 4>,
+				     <0 53 4>,
+				     <0 54 4>;
+			clocks = <&ahb1_gates 19>;
+			resets = <&ahb1_rst 19>;
+		};
+
 		spi0: spi@01c68000 {
 			compatible = "allwinner,sun6i-a31-spi";
 			reg = <0x01c68000 0x1000>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index c544a5504591..d2709b73316b 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -88,6 +88,14 @@
 		interrupts = <1 13 0x304>;
 	};
 
+	timer@2c000200 {
+		compatible = "arm,cortex-a5-global-timer",
+		             "arm,cortex-a9-global-timer";
+		reg = <0x2c000200 0x20>;
+		interrupts = <1 11 0x304>;
+		clocks = <&oscclk0>;
+	};
+
 	watchdog@2c000620 {
 		compatible = "arm,cortex-a5-twd-wdt";
 		reg = <0x2c000620 0x20>;
@@ -120,7 +128,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		osc@0 {
+		oscclk0: osc@0 {
 			/* CPU and internal AXI reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 73355ddc5186..6cc314e7b8fb 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -371,6 +371,19 @@
 				status = "disabled";
 			};
 
+			ftm: ftm@400b8000 {
+				compatible = "fsl,ftm-timer";
+				reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+				interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
+				clock-names = "ftm-evt", "ftm-src",
+					"ftm-evt-counter-en", "ftm-src-counter-en";
+				clocks = <&clks VF610_CLK_FTM2>,
+					<&clks VF610_CLK_FTM3>,
+					<&clks VF610_CLK_FTM2_EXT_FIX_EN>,
+					<&clks VF610_CLK_FTM3_EXT_FIX_EN>;
+				status = "disabled";
+			};
+
 			fec0: ethernet@400d0000 {
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d0000 0x1000>;
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index b8ac752fd24b..90249cfc37b3 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -4,6 +4,7 @@ config ARCH_VEXPRESS
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
+	select ARM_GLOBAL_TIMER
 	select ARM_TIMER_SP804
 	select COMMON_CLK_VERSATILE
 	select HAVE_ARM_SCU if SMP
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 43f1acf0d1d2..065131cbfcc0 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -136,6 +136,11 @@ config CLKSRC_SAMSUNG_PWM
 	  for all devicetree enabled platforms. This driver will be
 	  needed only on systems that do not have the Exynos MCT available.
 
+config FSL_FTM_TIMER
+	bool
+	help
+	  Support for Freescale FlexTimer Module (FTM) timer.
+
 config VF_PIT_TIMER
 	bool
 	help
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 6f25bdffc176..800b1303c236 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_CADENCE_TTC_TIMER)	+= cadence_ttc_timer.o
 obj-$(CONFIG_CLKSRC_EFM32)	+= time-efm32.o
 obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exynos_mct.o
 obj-$(CONFIG_CLKSRC_SAMSUNG_PWM)	+= samsung_pwm_timer.o
+obj-$(CONFIG_FSL_FTM_TIMER)	+= fsl_ftm_timer.o
 obj-$(CONFIG_VF_PIT_TIMER)	+= vf_pit_timer.o
 obj-$(CONFIG_CLKSRC_QCOM)	+= qcom-timer.o
 
diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c
index 0fc31d029e52..60e5a170c4d2 100644
--- a/drivers/clocksource/arm_global_timer.c
+++ b/drivers/clocksource/arm_global_timer.c
@@ -246,11 +246,12 @@ static void __init global_timer_of_register(struct device_node *np)
 	int err = 0;
 
 	/*
-	 * In r2p0 the comparators for each processor with the global timer
+	 * In A9 r2p0 the comparators for each processor with the global timer
 	 * fire when the timer value is greater than or equal to. In previous
 	 * revisions the comparators fired when the timer value was equal to.
 	 */
-	if ((read_cpuid_id() & 0xf0000f) < 0x200000) {
+	if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9
+	    && (read_cpuid_id() & 0xf0000f) < 0x200000) {
 		pr_warn("global-timer: non support for this cpu version.\n");
 		return;
 	}
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index 2a2ea2717f3a..d305fb089767 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -106,7 +106,7 @@ static void __init add_clocksource(struct device_node *source_timer)
 	sched_rate = rate;
 }
 
-static u64 read_sched_clock(void)
+static u64 notrace read_sched_clock(void)
 {
 	return ~__raw_readl(sched_io_base);
 }
diff --git a/drivers/clocksource/em_sti.c b/drivers/clocksource/em_sti.c
index 9d170834fcf3..d0a7bd66b8b9 100644
--- a/drivers/clocksource/em_sti.c
+++ b/drivers/clocksource/em_sti.c
@@ -318,10 +318,8 @@ static int em_sti_probe(struct platform_device *pdev)
 	int irq;
 
 	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
-	if (p == NULL) {
-		dev_err(&pdev->dev, "failed to allocate driver data\n");
+	if (p == NULL)
 		return -ENOMEM;
-	}
 
 	p->pdev = pdev;
 	platform_set_drvdata(pdev, p);
diff --git a/drivers/clocksource/fsl_ftm_timer.c b/drivers/clocksource/fsl_ftm_timer.c
new file mode 100644
index 000000000000..454227d4f895
--- /dev/null
+++ b/drivers/clocksource/fsl_ftm_timer.c
@@ -0,0 +1,367 @@
+/*
+ * Freescale FlexTimer Module (FTM) timer driver.
+ *
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+#define FTM_SC		0x00
+#define FTM_SC_CLK_SHIFT	3
+#define FTM_SC_CLK_MASK	(0x3 << FTM_SC_CLK_SHIFT)
+#define FTM_SC_CLK(c)	((c) << FTM_SC_CLK_SHIFT)
+#define FTM_SC_PS_MASK	0x7
+#define FTM_SC_TOIE	BIT(6)
+#define FTM_SC_TOF	BIT(7)
+
+#define FTM_CNT		0x04
+#define FTM_MOD		0x08
+#define FTM_CNTIN	0x4C
+
+#define FTM_PS_MAX	7
+
+struct ftm_clock_device {
+	void __iomem *clksrc_base;
+	void __iomem *clkevt_base;
+	unsigned long periodic_cyc;
+	unsigned long ps;
+	bool big_endian;
+};
+
+static struct ftm_clock_device *priv;
+
+static inline u32 ftm_readl(void __iomem *addr)
+{
+	if (priv->big_endian)
+		return ioread32be(addr);
+	else
+		return ioread32(addr);
+}
+
+static inline void ftm_writel(u32 val, void __iomem *addr)
+{
+	if (priv->big_endian)
+		iowrite32be(val, addr);
+	else
+		iowrite32(val, addr);
+}
+
+static inline void ftm_counter_enable(void __iomem *base)
+{
+	u32 val;
+
+	/* select and enable counter clock source */
+	val = ftm_readl(base + FTM_SC);
+	val &= ~(FTM_SC_PS_MASK | FTM_SC_CLK_MASK);
+	val |= priv->ps | FTM_SC_CLK(1);
+	ftm_writel(val, base + FTM_SC);
+}
+
+static inline void ftm_counter_disable(void __iomem *base)
+{
+	u32 val;
+
+	/* disable counter clock source */
+	val = ftm_readl(base + FTM_SC);
+	val &= ~(FTM_SC_PS_MASK | FTM_SC_CLK_MASK);
+	ftm_writel(val, base + FTM_SC);
+}
+
+static inline void ftm_irq_acknowledge(void __iomem *base)
+{
+	u32 val;
+
+	val = ftm_readl(base + FTM_SC);
+	val &= ~FTM_SC_TOF;
+	ftm_writel(val, base + FTM_SC);
+}
+
+static inline void ftm_irq_enable(void __iomem *base)
+{
+	u32 val;
+
+	val = ftm_readl(base + FTM_SC);
+	val |= FTM_SC_TOIE;
+	ftm_writel(val, base + FTM_SC);
+}
+
+static inline void ftm_irq_disable(void __iomem *base)
+{
+	u32 val;
+
+	val = ftm_readl(base + FTM_SC);
+	val &= ~FTM_SC_TOIE;
+	ftm_writel(val, base + FTM_SC);
+}
+
+static inline void ftm_reset_counter(void __iomem *base)
+{
+	/*
+	 * The CNT register contains the FTM counter value.
+	 * Reset clears the CNT register. Writing any value to COUNT
+	 * updates the counter with its initial value, CNTIN.
+	 */
+	ftm_writel(0x00, base + FTM_CNT);
+}
+
+static u64 ftm_read_sched_clock(void)
+{
+	return ftm_readl(priv->clksrc_base + FTM_CNT);
+}
+
+static int ftm_set_next_event(unsigned long delta,
+				struct clock_event_device *unused)
+{
+	/*
+	 * The CNNIN and MOD are all double buffer registers, writing
+	 * to the MOD register latches the value into a buffer. The MOD
+	 * register is updated with the value of its write buffer with
+	 * the following scenario:
+	 * a, the counter source clock is diabled.
+	 */
+	ftm_counter_disable(priv->clkevt_base);
+
+	/* Force the value of CNTIN to be loaded into the FTM counter */
+	ftm_reset_counter(priv->clkevt_base);
+
+	/*
+	 * The counter increments until the value of MOD is reached,
+	 * at which point the counter is reloaded with the value of CNTIN.
+	 * The TOF (the overflow flag) bit is set when the FTM counter
+	 * changes from MOD to CNTIN. So we should using the delta - 1.
+	 */
+	ftm_writel(delta - 1, priv->clkevt_base + FTM_MOD);
+
+	ftm_counter_enable(priv->clkevt_base);
+
+	ftm_irq_enable(priv->clkevt_base);
+
+	return 0;
+}
+
+static void ftm_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		ftm_set_next_event(priv->periodic_cyc, evt);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		ftm_counter_disable(priv->clkevt_base);
+		break;
+	default:
+		return;
+	}
+}
+
+static irqreturn_t ftm_evt_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	ftm_irq_acknowledge(priv->clkevt_base);
+
+	if (likely(evt->mode == CLOCK_EVT_MODE_ONESHOT)) {
+		ftm_irq_disable(priv->clkevt_base);
+		ftm_counter_disable(priv->clkevt_base);
+	}
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct clock_event_device ftm_clockevent = {
+	.name		= "Freescale ftm timer",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= ftm_set_mode,
+	.set_next_event	= ftm_set_next_event,
+	.rating		= 300,
+};
+
+static struct irqaction ftm_timer_irq = {
+	.name		= "Freescale ftm timer",
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= ftm_evt_interrupt,
+	.dev_id		= &ftm_clockevent,
+};
+
+static int __init ftm_clockevent_init(unsigned long freq, int irq)
+{
+	int err;
+
+	ftm_writel(0x00, priv->clkevt_base + FTM_CNTIN);
+	ftm_writel(~0UL, priv->clkevt_base + FTM_MOD);
+
+	ftm_reset_counter(priv->clkevt_base);
+
+	err = setup_irq(irq, &ftm_timer_irq);
+	if (err) {
+		pr_err("ftm: setup irq failed: %d\n", err);
+		return err;
+	}
+
+	ftm_clockevent.cpumask = cpumask_of(0);
+	ftm_clockevent.irq = irq;
+
+	clockevents_config_and_register(&ftm_clockevent,
+					freq / (1 << priv->ps),
+					1, 0xffff);
+
+	ftm_counter_enable(priv->clkevt_base);
+
+	return 0;
+}
+
+static int __init ftm_clocksource_init(unsigned long freq)
+{
+	int err;
+
+	ftm_writel(0x00, priv->clksrc_base + FTM_CNTIN);
+	ftm_writel(~0UL, priv->clksrc_base + FTM_MOD);
+
+	ftm_reset_counter(priv->clksrc_base);
+
+	sched_clock_register(ftm_read_sched_clock, 16, freq / (1 << priv->ps));
+	err = clocksource_mmio_init(priv->clksrc_base + FTM_CNT, "fsl-ftm",
+				    freq / (1 << priv->ps), 300, 16,
+				    clocksource_mmio_readl_up);
+	if (err) {
+		pr_err("ftm: init clock source mmio failed: %d\n", err);
+		return err;
+	}
+
+	ftm_counter_enable(priv->clksrc_base);
+
+	return 0;
+}
+
+static int __init __ftm_clk_init(struct device_node *np, char *cnt_name,
+				 char *ftm_name)
+{
+	struct clk *clk;
+	int err;
+
+	clk = of_clk_get_by_name(np, cnt_name);
+	if (IS_ERR(clk)) {
+		pr_err("ftm: Cannot get \"%s\": %ld\n", cnt_name, PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+	err = clk_prepare_enable(clk);
+	if (err) {
+		pr_err("ftm: clock failed to prepare+enable \"%s\": %d\n",
+			cnt_name, err);
+		return err;
+	}
+
+	clk = of_clk_get_by_name(np, ftm_name);
+	if (IS_ERR(clk)) {
+		pr_err("ftm: Cannot get \"%s\": %ld\n", ftm_name, PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+	err = clk_prepare_enable(clk);
+	if (err)
+		pr_err("ftm: clock failed to prepare+enable \"%s\": %d\n",
+			ftm_name, err);
+
+	return clk_get_rate(clk);
+}
+
+static unsigned long __init ftm_clk_init(struct device_node *np)
+{
+	unsigned long freq;
+
+	freq = __ftm_clk_init(np, "ftm-evt-counter-en", "ftm-evt");
+	if (freq <= 0)
+		return 0;
+
+	freq = __ftm_clk_init(np, "ftm-src-counter-en", "ftm-src");
+	if (freq <= 0)
+		return 0;
+
+	return freq;
+}
+
+static int __init ftm_calc_closest_round_cyc(unsigned long freq)
+{
+	priv->ps = 0;
+
+	/* The counter register is only using the lower 16 bits, and
+	 * if the 'freq' value is to big here, then the periodic_cyc
+	 * may exceed 0xFFFF.
+	 */
+	do {
+		priv->periodic_cyc = DIV_ROUND_CLOSEST(freq,
+						HZ * (1 << priv->ps++));
+	} while (priv->periodic_cyc > 0xFFFF);
+
+	if (priv->ps > FTM_PS_MAX) {
+		pr_err("ftm: the prescaler is %lu > %d\n",
+				priv->ps, FTM_PS_MAX);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void __init ftm_timer_init(struct device_node *np)
+{
+	unsigned long freq;
+	int irq;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return;
+
+	priv->clkevt_base = of_iomap(np, 0);
+	if (!priv->clkevt_base) {
+		pr_err("ftm: unable to map event timer registers\n");
+		goto err;
+	}
+
+	priv->clksrc_base = of_iomap(np, 1);
+	if (!priv->clksrc_base) {
+		pr_err("ftm: unable to map source timer registers\n");
+		goto err;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (irq <= 0) {
+		pr_err("ftm: unable to get IRQ from DT, %d\n", irq);
+		goto err;
+	}
+
+	priv->big_endian = of_property_read_bool(np, "big-endian");
+
+	freq = ftm_clk_init(np);
+	if (!freq)
+		goto err;
+
+	if (ftm_calc_closest_round_cyc(freq))
+		goto err;
+
+	if (ftm_clocksource_init(freq))
+		goto err;
+
+	if (ftm_clockevent_init(freq, irq))
+		goto err;
+
+	return;
+
+err:
+	kfree(priv);
+}
+CLOCKSOURCE_OF_DECLARE(flextimer, "fsl,ftm-timer", ftm_timer_init);
diff --git a/drivers/clocksource/mmio.c b/drivers/clocksource/mmio.c
index c0e25125a55e..1593ade2a815 100644
--- a/drivers/clocksource/mmio.c
+++ b/drivers/clocksource/mmio.c
@@ -22,22 +22,22 @@ static inline struct clocksource_mmio *to_mmio_clksrc(struct clocksource *c)
 
 cycle_t clocksource_mmio_readl_up(struct clocksource *c)
 {
-	return readl_relaxed(to_mmio_clksrc(c)->reg);
+	return (cycle_t)readl_relaxed(to_mmio_clksrc(c)->reg);
 }
 
 cycle_t clocksource_mmio_readl_down(struct clocksource *c)
 {
-	return ~readl_relaxed(to_mmio_clksrc(c)->reg);
+	return ~(cycle_t)readl_relaxed(to_mmio_clksrc(c)->reg) & c->mask;
 }
 
 cycle_t clocksource_mmio_readw_up(struct clocksource *c)
 {
-	return readw_relaxed(to_mmio_clksrc(c)->reg);
+	return (cycle_t)readw_relaxed(to_mmio_clksrc(c)->reg);
 }
 
 cycle_t clocksource_mmio_readw_down(struct clocksource *c)
 {
-	return ~(unsigned)readw_relaxed(to_mmio_clksrc(c)->reg);
+	return ~(cycle_t)readw_relaxed(to_mmio_clksrc(c)->reg) & c->mask;
 }
 
 /**
diff --git a/drivers/clocksource/qcom-timer.c b/drivers/clocksource/qcom-timer.c
index e807acf4c665..8d115db1e651 100644
--- a/drivers/clocksource/qcom-timer.c
+++ b/drivers/clocksource/qcom-timer.c
@@ -26,6 +26,8 @@
 #include <linux/of_irq.h>
 #include <linux/sched_clock.h>
 
+#include <asm/delay.h>
+
 #define TIMER_MATCH_VAL			0x0000
 #define TIMER_COUNT_VAL			0x0004
 #define TIMER_ENABLE			0x0008
@@ -179,6 +181,15 @@ static u64 notrace msm_sched_clock_read(void)
 	return msm_clocksource.read(&msm_clocksource);
 }
 
+static unsigned long msm_read_current_timer(void)
+{
+	return msm_clocksource.read(&msm_clocksource);
+}
+
+static struct delay_timer msm_delay_timer = {
+	.read_current_timer = msm_read_current_timer,
+};
+
 static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
 				  bool percpu)
 {
@@ -217,6 +228,8 @@ err:
 	if (res)
 		pr_err("clocksource_register failed\n");
 	sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz);
+	msm_delay_timer.freq = dgt_hz;
+	register_current_timer_delay(&msm_delay_timer);
 }
 
 #ifdef CONFIG_ARCH_QCOM
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index bc8d025ce861..dfa780396b91 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -1106,10 +1106,8 @@ static int sh_cmt_probe(struct platform_device *pdev)
 	}
 
 	cmt = kzalloc(sizeof(*cmt), GFP_KERNEL);
-	if (cmt == NULL) {
-		dev_err(&pdev->dev, "failed to allocate driver data\n");
+	if (cmt == NULL)
 		return -ENOMEM;
-	}
 
 	ret = sh_cmt_setup(cmt, pdev);
 	if (ret) {
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index f2c1c36139e1..188d4e092efc 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -533,10 +533,8 @@ static int sh_mtu2_probe(struct platform_device *pdev)
 	}
 
 	mtu = kzalloc(sizeof(*mtu), GFP_KERNEL);
-	if (mtu == NULL) {
-		dev_err(&pdev->dev, "failed to allocate driver data\n");
+	if (mtu == NULL)
 		return -ENOMEM;
-	}
 
 	ret = sh_mtu2_setup(mtu, pdev);
 	if (ret) {
diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c
index 4ba2c0fea580..6bd17a8f3dd4 100644
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
@@ -498,7 +498,7 @@ static int sh_tmu_channel_setup(struct sh_tmu_channel *ch, unsigned int index,
 			ch->base = tmu->mapbase + 8 + ch->index * 12;
 	}
 
-	ch->irq = platform_get_irq(tmu->pdev, ch->index);
+	ch->irq = platform_get_irq(tmu->pdev, index);
 	if (ch->irq < 0) {
 		dev_err(&tmu->pdev->dev, "ch%u: failed to get irq\n",
 			ch->index);
@@ -644,10 +644,8 @@ static int sh_tmu_probe(struct platform_device *pdev)
 	}
 
 	tmu = kzalloc(sizeof(*tmu), GFP_KERNEL);
-	if (tmu == NULL) {
-		dev_err(&pdev->dev, "failed to allocate driver data\n");
+	if (tmu == NULL)
 		return -ENOMEM;
-	}
 
 	ret = sh_tmu_setup(tmu, pdev);
 	if (ret) {
diff --git a/drivers/clocksource/time-efm32.c b/drivers/clocksource/time-efm32.c
index 1a6205b7bed3..bba62f9deefb 100644
--- a/drivers/clocksource/time-efm32.c
+++ b/drivers/clocksource/time-efm32.c
@@ -272,4 +272,5 @@ static void __init efm32_timer_init(struct device_node *np)
 		}
 	}
 }
-CLOCKSOURCE_OF_DECLARE(efm32, "efm32,timer", efm32_timer_init);
+CLOCKSOURCE_OF_DECLARE(efm32compat, "efm32,timer", efm32_timer_init);
+CLOCKSOURCE_OF_DECLARE(efm32, "energymicro,efm32-timer", efm32_timer_init);
diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c
index deebcd6469fc..02268448dc85 100644
--- a/drivers/clocksource/timer-sun5i.c
+++ b/drivers/clocksource/timer-sun5i.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqreturn.h>
+#include <linux/reset.h>
 #include <linux/sched_clock.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -143,6 +144,7 @@ static u64 sun5i_timer_sched_read(void)
 
 static void __init sun5i_timer_init(struct device_node *node)
 {
+	struct reset_control *rstc;
 	unsigned long rate;
 	struct clk *clk;
 	int ret, irq;
@@ -162,6 +164,10 @@ static void __init sun5i_timer_init(struct device_node *node)
 	clk_prepare_enable(clk);
 	rate = clk_get_rate(clk);
 
+	rstc = of_reset_control_get(node, NULL);
+	if (!IS_ERR(rstc))
+		reset_control_deassert(rstc);
+
 	writel(~0, timer_base + TIMER_INTVAL_LO_REG(1));
 	writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
 	       timer_base + TIMER_CTL_REG(1));
diff --git a/include/linux/sched_clock.h b/include/linux/sched_clock.h
index cddf0c2940b6..efa931c5cef1 100644
--- a/include/linux/sched_clock.h
+++ b/include/linux/sched_clock.h
@@ -14,7 +14,6 @@ extern void sched_clock_postinit(void);
 static inline void sched_clock_postinit(void) { }
 #endif
 
-extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
 extern void sched_clock_register(u64 (*read)(void), int bits,
 				 unsigned long rate);
 
diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 419a52cecd20..c8780cdaf852 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -165,21 +165,21 @@ static inline void pps_set_freq(s64 freq)
 
 static inline int is_error_status(int status)
 {
-	return (time_status & (STA_UNSYNC|STA_CLOCKERR))
+	return (status & (STA_UNSYNC|STA_CLOCKERR))
 		/* PPS signal lost when either PPS time or
 		 * PPS frequency synchronization requested
 		 */
-		|| ((time_status & (STA_PPSFREQ|STA_PPSTIME))
-			&& !(time_status & STA_PPSSIGNAL))
+		|| ((status & (STA_PPSFREQ|STA_PPSTIME))
+			&& !(status & STA_PPSSIGNAL))
 		/* PPS jitter exceeded when
 		 * PPS time synchronization requested */
-		|| ((time_status & (STA_PPSTIME|STA_PPSJITTER))
+		|| ((status & (STA_PPSTIME|STA_PPSJITTER))
 			== (STA_PPSTIME|STA_PPSJITTER))
 		/* PPS wander exceeded or calibration error when
 		 * PPS frequency synchronization requested
 		 */
-		|| ((time_status & STA_PPSFREQ)
-			&& (time_status & (STA_PPSWANDER|STA_PPSERROR)));
+		|| ((status & STA_PPSFREQ)
+			&& (status & (STA_PPSWANDER|STA_PPSERROR)));
 }
 
 static inline void pps_fill_timex(struct timex *txc)
@@ -923,7 +923,10 @@ void __hardpps(const struct timespec *phase_ts, const struct timespec *raw_ts)
 
 static int __init ntp_tick_adj_setup(char *str)
 {
-	ntp_tick_adj = simple_strtol(str, NULL, 0);
+	int rc = kstrtol(str, 0, (long *)&ntp_tick_adj);
+
+	if (rc)
+		return rc;
 	ntp_tick_adj <<= NTP_SCALE_SHIFT;
 
 	return 1;
diff --git a/kernel/time/sched_clock.c b/kernel/time/sched_clock.c
index 4d23dc4d8139..445106d2c729 100644
--- a/kernel/time/sched_clock.c
+++ b/kernel/time/sched_clock.c
@@ -49,13 +49,6 @@ static u64 notrace jiffy_sched_clock_read(void)
 	return (u64)(jiffies - INITIAL_JIFFIES);
 }
 
-static u32 __read_mostly (*read_sched_clock_32)(void);
-
-static u64 notrace read_sched_clock_32_wrapper(void)
-{
-	return read_sched_clock_32();
-}
-
 static u64 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read;
 
 static inline u64 notrace cyc_to_ns(u64 cyc, u32 mult, u32 shift)
@@ -176,12 +169,6 @@ void __init sched_clock_register(u64 (*read)(void), int bits,
 	pr_debug("Registered %pF as sched_clock source\n", read);
 }
 
-void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
-{
-	read_sched_clock_32 = read;
-	sched_clock_register(read_sched_clock_32_wrapper, bits, rate);
-}
-
 void __init sched_clock_postinit(void)
 {
 	/*