Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

drivers/net/Kconfig

@@ -23,9 +23,12 @@ config NETDEVICES
 
 	  If unsure, say Y.
 
+# All the following symbols are dependent on NETDEVICES - do not repeat
+# that for each of the symbols.
+if NETDEVICES
+
 config DUMMY
 	tristate "Dummy net driver support"
-	depends on NETDEVICES
 	---help---
 	  This is essentially a bit-bucket device (i.e. traffic you send to
 	  this device is consigned into oblivion) with a configurable IP
@@ -45,7 +48,6 @@ config DUMMY
 
 config BONDING
 	tristate "Bonding driver support"
-	depends on NETDEVICES
 	depends on INET
 	---help---
 	  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
@@ -63,7 +65,6 @@ config BONDING
 
 config EQUALIZER
 	tristate "EQL (serial line load balancing) support"
-	depends on NETDEVICES
 	---help---
 	  If you have two serial connections to some other computer (this
 	  usually requires two modems and two telephone lines) and you use
@@ -83,7 +84,6 @@ config EQUALIZER
 
 config TUN
 	tristate "Universal TUN/TAP device driver support"
-	depends on NETDEVICES
 	select CRC32
 	---help---
 	  TUN/TAP provides packet reception and transmission for user space
@@ -107,7 +107,7 @@ config TUN
 
 config NET_SB1000
 	tristate "General Instruments Surfboard 1000"
-	depends on NETDEVICES && PNP
+	depends on PNP
 	---help---
 	  This is a driver for the General Instrument (also known as
 	  NextLevel) SURFboard 1000 internal
@@ -129,16 +129,14 @@ config NET_SB1000
 
 	  If you don't have this card, of course say N.
 
-if NETDEVICES
 	source "drivers/net/arcnet/Kconfig"
-endif
 
 #
 #	Ethernet
 #
 
 menu "Ethernet (10 or 100Mbit)"
-	depends on NETDEVICES && !UML
+	depends on !UML
 
 config NET_ETHERNET
 	bool "Ethernet (10 or 100Mbit)"
@@ -1137,7 +1135,7 @@ config IBMLANA
 
 config IBMVETH
 	tristate "IBM LAN Virtual Ethernet support"
-	depends on NETDEVICES && NET_ETHERNET && PPC_PSERIES
+	depends on NET_ETHERNET && PPC_PSERIES
 	---help---
 	  This driver supports virtual ethernet adapters on newer IBM iSeries
 	  and pSeries systems.
@@ -1760,7 +1758,7 @@ endmenu
 #
 
 menu "Ethernet (1000 Mbit)"
-	depends on NETDEVICES && !UML
+	depends on !UML
 
 config ACENIC
 	tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
@@ -2091,7 +2089,7 @@ endmenu
 #
 
 menu "Ethernet (10000 Mbit)"
-	depends on NETDEVICES && !UML
+	depends on !UML
 
 config IXGB
 	tristate "Intel(R) PRO/10GbE support"
@@ -2186,11 +2184,11 @@ source "drivers/s390/net/Kconfig"
 
 config ISERIES_VETH
 	tristate "iSeries Virtual Ethernet driver support"
-	depends on NETDEVICES && PPC_ISERIES
+	depends on PPC_ISERIES
 
 config FDDI
 	bool "FDDI driver support"
-	depends on NETDEVICES && (PCI || EISA)
+	depends on (PCI || EISA)
 	help
 	  Fiber Distributed Data Interface is a high speed local area network
 	  design; essentially a replacement for high speed Ethernet. FDDI can
@@ -2239,7 +2237,7 @@ config SKFP
 
 config HIPPI
 	bool "HIPPI driver support (EXPERIMENTAL)"
-	depends on NETDEVICES && EXPERIMENTAL && INET && PCI
+	depends on EXPERIMENTAL && INET && PCI
 	help
 	  HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
 	  1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
@@ -2271,7 +2269,7 @@ config ROADRUNNER_LARGE_RINGS
 
 config PLIP
 	tristate "PLIP (parallel port) support"
-	depends on NETDEVICES && PARPORT
+	depends on PARPORT
 	---help---
 	  PLIP (Parallel Line Internet Protocol) is used to create a
 	  reasonably fast mini network consisting of two (or, rarely, more)
@@ -2307,7 +2305,6 @@ config PLIP
 
 config PPP
 	tristate "PPP (point-to-point protocol) support"
-	depends on NETDEVICES
 	---help---
 	  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves
 	  the same purpose: sending Internet traffic over telephone (and other
@@ -2443,7 +2440,6 @@ config PPPOATM
 
 config SLIP
 	tristate "SLIP (serial line) support"
-	depends on NETDEVICES
 	---help---
 	  Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
 	  connect to your Internet service provider or to connect to some
@@ -2510,7 +2506,7 @@ config SLIP_MODE_SLIP6
 
 config NET_FC
 	bool "Fibre Channel driver support"
-	depends on NETDEVICES && SCSI && PCI
+	depends on SCSI && PCI
 	help
 	  Fibre Channel is a high speed serial protocol mainly used to connect
 	  large storage devices to the computer; it is compatible with and
@@ -2523,7 +2519,7 @@ config NET_FC
 
 config SHAPER
 	tristate "Traffic Shaper (EXPERIMENTAL)"
-	depends on NETDEVICES && EXPERIMENTAL
+	depends on EXPERIMENTAL
 	---help---
 	  The traffic shaper is a virtual network device that allows you to
 	  limit the rate of outgoing data flow over some other network device.
@@ -2544,11 +2540,13 @@ config SHAPER
 
 config NETCONSOLE
 	tristate "Network console logging support (EXPERIMENTAL)"
-	depends on NETDEVICES && INET && EXPERIMENTAL
+	depends on EXPERIMENTAL
 	---help---
 	If you want to log kernel messages over the network, enable this.
 	See <file:Documentation/networking/netconsole.txt> for details.
 
+endif #NETDEVICES
+
 config NETPOLL
 	def_bool NETCONSOLE
 

net/core/sock.c

@@ -206,13 +206,14 @@ int sock_setsockopt(struct socket *sock, int level, int optname,
 	 */
 
 #ifdef SO_DONTLINGER		/* Compatibility item... */
-	switch (optname) {
+	if (optname == SO_DONTLINGER) {
-		case SO_DONTLINGER:
+		lock_sock(sk);
-			sock_reset_flag(sk, SOCK_LINGER);
+		sock_reset_flag(sk, SOCK_LINGER);
-			return 0;
+		release_sock(sk);
+		return 0;
 	}
-#endif	
+#endif
-		
+	
   	if(optlen<sizeof(int))
   		return(-EINVAL);
   	

net/core/utils.c

@@ -23,10 +23,10 @@
 #include <linux/percpu.h>
 #include <linux/init.h>
 
+#include <asm/byteorder.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 
-
 /*
   This is a maximally equidistributed combined Tausworthe generator
   based on code from GNU Scientific Library 1.5 (30 Jun 2004)
@@ -153,3 +153,38 @@ int net_ratelimit(void)
 EXPORT_SYMBOL(net_random);
 EXPORT_SYMBOL(net_ratelimit);
 EXPORT_SYMBOL(net_srandom);
+
+/*
+ * Convert an ASCII string to binary IP.
+ * This is outside of net/ipv4/ because various code that uses IP addresses
+ * is otherwise not dependent on the TCP/IP stack.
+ */
+
+__u32 in_aton(const char *str)
+{
+	unsigned long l;
+	unsigned int val;
+	int i;
+
+	l = 0;
+	for (i = 0; i < 4; i++)
+	{
+		l <<= 8;
+		if (*str != '\0')
+		{
+			val = 0;
+			while (*str != '\0' && *str != '.')
+			{
+				val *= 10;
+				val += *str - '0';
+				str++;
+			}
+			l |= val;
+			if (*str != '\0')
+				str++;
+		}
+	}
+	return(htonl(l));
+}
+
+EXPORT_SYMBOL(in_aton);

net/ipv4/Kconfig

@@ -124,7 +124,7 @@ config IP_ROUTE_MULTIPATH
 
 config IP_ROUTE_MULTIPATH_CACHED
 	bool "IP: equal cost multipath with caching support (EXPERIMENTAL)"
-	depends on: IP_ROUTE_MULTIPATH
+	depends on IP_ROUTE_MULTIPATH
 	help
 	  Normally, equal cost multipath routing is not supported by the
 	  routing cache. If you say Y here, alternative routes are cached

net/ipv4/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the Linux TCP/IP (INET) layer.
 #
 
-obj-y     := utils.o route.o inetpeer.o protocol.o \
+obj-y     := route.o inetpeer.o protocol.o \
 	     ip_input.o ip_fragment.o ip_forward.o ip_options.o \
 	     ip_output.o ip_sockglue.o \
 	     tcp.o tcp_input.o tcp_output.o tcp_timer.o tcp_ipv4.o \

net/ipv4/netfilter/ip_conntrack_core.c

@@ -510,7 +510,7 @@ init_conntrack(const struct ip_conntrack_tuple *tuple,
 		/* Welcome, Mr. Bond.  We've been expecting you... */
 		__set_bit(IPS_EXPECTED_BIT, &conntrack->status);
 		conntrack->master = exp->master;
-#if CONFIG_IP_NF_CONNTRACK_MARK
+#ifdef CONFIG_IP_NF_CONNTRACK_MARK
 		conntrack->mark = exp->master->mark;
 #endif
 		nf_conntrack_get(&conntrack->master->ct_general);

net/ipv4/utils.c

@@ -1,59 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		Various kernel-resident INET utility functions; mainly
- *		for format conversion and debugging output.
- *
- * Version:	$Id: utils.c,v 1.8 2000/10/03 07:29:01 anton Exp $
- *
- * Author:	Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
- *
- * Fixes:
- *		Alan Cox	:	verify_area check.
- *		Alan Cox	:	removed old debugging.
- *		Andi Kleen	:	add net_ratelimit()  
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/*
- *	Convert an ASCII string to binary IP. 
- */
- 
-__u32 in_aton(const char *str)
-{
-	unsigned long l;
-	unsigned int val;
-	int i;
-
-	l = 0;
-	for (i = 0; i < 4; i++) 
-	{
-		l <<= 8;
-		if (*str != '\0') 
-		{
-			val = 0;
-			while (*str != '\0' && *str != '.') 
-			{
-				val *= 10;
-				val += *str - '0';
-				str++;
-			}
-			l |= val;
-			if (*str != '\0') 
-				str++;
-		}
-	}
-	return(htonl(l));
-}
-
-EXPORT_SYMBOL(in_aton);