diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index dab22cc97ead..968eda37754c 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -48,112 +48,6 @@ struct cs4270_private { unsigned int mode; /* The mode (I2S or left-justified) */ }; -/* The number of MCLK/LRCK ratios supported by the CS4270 */ -#define NUM_MCLK_RATIOS 9 - -/* The actual MCLK/LRCK ratios, in increasing numerical order */ -static unsigned int mclk_ratios[NUM_MCLK_RATIOS] = - {64, 96, 128, 192, 256, 384, 512, 768, 1024}; - -/* - * Determine the CS4270 samples rates. - * - * 'freq' is the input frequency to MCLK. The other parameters are ignored. - * - * The value of MCLK is used to determine which sample rates are supported - * by the CS4270. The ratio of MCLK / Fs must be equal to one of nine - * support values: 64, 96, 128, 192, 256, 384, 512, 768, and 1024. - * - * This function calculates the nine ratios and determines which ones match - * a standard sample rate. If there's a match, then it is added to the list - * of support sample rates. - * - * This function must be called by the machine driver's 'startup' function, - * otherwise the list of supported sample rates will not be available in - * time for ALSA. - * - * Note that in stand-alone mode, the sample rate is determined by input - * pins M0, M1, MDIV1, and MDIV2. Also in stand-alone mode, divide-by-3 - * is not a programmable option. However, divide-by-3 is not an available - * option in stand-alone mode. This cases two problems: a ratio of 768 is - * not available (it requires divide-by-3) and B) ratios 192 and 384 can - * only be selected with divide-by-1.5, but there is an errate that make - * this selection difficult. - * - * In addition, there is no mechanism for communicating with the machine - * driver what the input settings can be. This would need to be implemented - * for stand-alone mode to work. - */ -static int cs4270_set_dai_sysclk(struct snd_soc_codec_dai *codec_dai, - int clk_id, unsigned int freq, int dir) -{ - struct snd_soc_codec *codec = codec_dai->codec; - struct cs4270_private *cs4270 = codec->private_data; - unsigned int rates = 0; - unsigned int rate_min = -1; - unsigned int rate_max = 0; - unsigned int i; - - cs4270->mclk = freq; - - for (i = 0; i < NUM_MCLK_RATIOS; i++) { - unsigned int rate = freq / mclk_ratios[i]; - rates |= snd_pcm_rate_to_rate_bit(rate); - if (rate < rate_min) - rate_min = rate; - if (rate > rate_max) - rate_max = rate; - } - /* FIXME: soc should support a rate list */ - rates &= ~SNDRV_PCM_RATE_KNOT; - - if (!rates) { - printk(KERN_ERR "cs4270: could not find a valid sample rate\n"); - return -EINVAL; - } - - codec_dai->playback.rates = rates; - codec_dai->playback.rate_min = rate_min; - codec_dai->playback.rate_max = rate_max; - - codec_dai->capture.rates = rates; - codec_dai->capture.rate_min = rate_min; - codec_dai->capture.rate_max = rate_max; - - return 0; -} - -/* - * Configure the codec for the selected audio format - * - * This function takes a bitmask of SND_SOC_DAIFMT_x bits and programs the - * codec accordingly. - * - * Currently, this function only supports SND_SOC_DAIFMT_I2S and - * SND_SOC_DAIFMT_LEFT_J. The CS4270 codec also supports right-justified - * data for playback only, but ASoC currently does not support different - * formats for playback vs. record. - */ -static int cs4270_set_dai_fmt(struct snd_soc_codec_dai *codec_dai, - unsigned int format) -{ - struct snd_soc_codec *codec = codec_dai->codec; - struct cs4270_private *cs4270 = codec->private_data; - int ret = 0; - - switch (format & SND_SOC_DAIFMT_FORMAT_MASK) { - case SND_SOC_DAIFMT_I2S: - case SND_SOC_DAIFMT_LEFT_J: - cs4270->mode = format & SND_SOC_DAIFMT_FORMAT_MASK; - break; - default: - printk(KERN_ERR "cs4270: invalid DAI format\n"); - ret = -EINVAL; - } - - return ret; -} - /* * The codec isn't really big-endian or little-endian, since the I2S * interface requires data to be sent serially with the MSbit first. @@ -228,6 +122,156 @@ static int cs4270_set_dai_fmt(struct snd_soc_codec_dai *codec_dai, #define CS4270_MUTE_DAC_A 0x01 #define CS4270_MUTE_DAC_B 0x02 +/* + * Clock Ratio Selection for Master Mode with I2C enabled + * + * The data for this chart is taken from Table 5 of the CS4270 reference + * manual. + * + * This table is used to determine how to program the Mode Control register. + * It is also used by cs4270_set_dai_sysclk() to tell ALSA which sampling + * rates the CS4270 currently supports. + * + * Each element in this array corresponds to the ratios in mclk_ratios[]. + * These two arrays need to be in sync. + * + * 'speed_mode' is the corresponding bit pattern to be written to the + * MODE bits of the Mode Control Register + * + * 'mclk' is the corresponding bit pattern to be wirten to the MCLK bits of + * the Mode Control Register. + * + * In situations where a single ratio is represented by multiple speed + * modes, we favor the slowest speed. E.g, for a ratio of 128, we pick + * double-speed instead of quad-speed. However, the CS4270 errata states + * that Divide-By-1.5 can cause failures, so we avoid that mode where + * possible. + * + * ERRATA: There is an errata for the CS4270 where divide-by-1.5 does not + * work if VD = 3.3V. If this effects you, select the + * CONFIG_SND_SOC_CS4270_VD33_ERRATA Kconfig option, and the driver will + * never select any sample rates that require divide-by-1.5. + */ +static struct { + unsigned int ratio; + u8 speed_mode; + u8 mclk; +} cs4270_mode_ratios[] = { + {64, CS4270_MODE_4X, CS4270_MODE_DIV1}, +#ifndef CONFIG_SND_SOC_CS4270_VD33_ERRATA + {96, CS4270_MODE_4X, CS4270_MODE_DIV15}, +#endif + {128, CS4270_MODE_2X, CS4270_MODE_DIV1}, + {192, CS4270_MODE_4X, CS4270_MODE_DIV3}, + {256, CS4270_MODE_1X, CS4270_MODE_DIV1}, + {384, CS4270_MODE_2X, CS4270_MODE_DIV3}, + {512, CS4270_MODE_1X, CS4270_MODE_DIV2}, + {768, CS4270_MODE_1X, CS4270_MODE_DIV3}, + {1024, CS4270_MODE_1X, CS4270_MODE_DIV4} +}; + +/* The number of MCLK/LRCK ratios supported by the CS4270 */ +#define NUM_MCLK_RATIOS ARRAY_SIZE(cs4270_mode_ratios) + +/* + * Determine the CS4270 samples rates. + * + * 'freq' is the input frequency to MCLK. The other parameters are ignored. + * + * The value of MCLK is used to determine which sample rates are supported + * by the CS4270. The ratio of MCLK / Fs must be equal to one of nine + * support values: 64, 96, 128, 192, 256, 384, 512, 768, and 1024. + * + * This function calculates the nine ratios and determines which ones match + * a standard sample rate. If there's a match, then it is added to the list + * of support sample rates. + * + * This function must be called by the machine driver's 'startup' function, + * otherwise the list of supported sample rates will not be available in + * time for ALSA. + * + * Note that in stand-alone mode, the sample rate is determined by input + * pins M0, M1, MDIV1, and MDIV2. Also in stand-alone mode, divide-by-3 + * is not a programmable option. However, divide-by-3 is not an available + * option in stand-alone mode. This cases two problems: a ratio of 768 is + * not available (it requires divide-by-3) and B) ratios 192 and 384 can + * only be selected with divide-by-1.5, but there is an errate that make + * this selection difficult. + * + * In addition, there is no mechanism for communicating with the machine + * driver what the input settings can be. This would need to be implemented + * for stand-alone mode to work. + */ +static int cs4270_set_dai_sysclk(struct snd_soc_codec_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct cs4270_private *cs4270 = codec->private_data; + unsigned int rates = 0; + unsigned int rate_min = -1; + unsigned int rate_max = 0; + unsigned int i; + + cs4270->mclk = freq; + + for (i = 0; i < NUM_MCLK_RATIOS; i++) { + unsigned int rate = freq / cs4270_mode_ratios[i].ratio; + rates |= snd_pcm_rate_to_rate_bit(rate); + if (rate < rate_min) + rate_min = rate; + if (rate > rate_max) + rate_max = rate; + } + /* FIXME: soc should support a rate list */ + rates &= ~SNDRV_PCM_RATE_KNOT; + + if (!rates) { + printk(KERN_ERR "cs4270: could not find a valid sample rate\n"); + return -EINVAL; + } + + codec_dai->playback.rates = rates; + codec_dai->playback.rate_min = rate_min; + codec_dai->playback.rate_max = rate_max; + + codec_dai->capture.rates = rates; + codec_dai->capture.rate_min = rate_min; + codec_dai->capture.rate_max = rate_max; + + return 0; +} + +/* + * Configure the codec for the selected audio format + * + * This function takes a bitmask of SND_SOC_DAIFMT_x bits and programs the + * codec accordingly. + * + * Currently, this function only supports SND_SOC_DAIFMT_I2S and + * SND_SOC_DAIFMT_LEFT_J. The CS4270 codec also supports right-justified + * data for playback only, but ASoC currently does not support different + * formats for playback vs. record. + */ +static int cs4270_set_dai_fmt(struct snd_soc_codec_dai *codec_dai, + unsigned int format) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct cs4270_private *cs4270 = codec->private_data; + int ret = 0; + + switch (format & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_LEFT_J: + cs4270->mode = format & SND_SOC_DAIFMT_FORMAT_MASK; + break; + default: + printk(KERN_ERR "cs4270: invalid DAI format\n"); + ret = -EINVAL; + } + + return ret; +} + /* * A list of addresses on which this CS4270 could use. I2C addresses are * 7 bits. For the CS4270, the upper four bits are always 1001, and the @@ -314,53 +358,6 @@ static int cs4270_i2c_write(struct snd_soc_codec *codec, unsigned int reg, return 0; } -/* - * Clock Ratio Selection for Master Mode with I2C enabled - * - * The data for this chart is taken from Table 5 of the CS4270 reference - * manual. - * - * This table is used to determine how to program the Mode Control register. - * It is also used by cs4270_set_dai_sysclk() to tell ALSA which sampling - * rates the CS4270 currently supports. - * - * Each element in this array corresponds to the ratios in mclk_ratios[]. - * These two arrays need to be in sync. - * - * 'speed_mode' is the corresponding bit pattern to be written to the - * MODE bits of the Mode Control Register - * - * 'mclk' is the corresponding bit pattern to be wirten to the MCLK bits of - * the Mode Control Register. - * - * In situations where a single ratio is represented by multiple speed - * modes, we favor the slowest speed. E.g, for a ratio of 128, we pick - * double-speed instead of quad-speed. However, the CS4270 errata states - * that Divide-By-1.5 can cause failures, so we avoid that mode where - * possible. - * - * ERRATA: There is an errata for the CS4270 where divide-by-1.5 does not - * work if VD = 3.3V. If this effects you, select the - * CONFIG_SND_SOC_CS4270_VD33_ERRATA Kconfig option, and the driver will - * never select any sample rates that require divide-by-1.5. - */ -static struct { - u8 speed_mode; - u8 mclk; -} cs4270_mode_ratios[NUM_MCLK_RATIOS] = { - {CS4270_MODE_4X, CS4270_MODE_DIV1}, /* 64 */ -#ifndef CONFIG_SND_SOC_CS4270_VD33_ERRATA - {CS4270_MODE_4X, CS4270_MODE_DIV15}, /* 96 */ -#endif - {CS4270_MODE_2X, CS4270_MODE_DIV1}, /* 128 */ - {CS4270_MODE_4X, CS4270_MODE_DIV3}, /* 192 */ - {CS4270_MODE_1X, CS4270_MODE_DIV1}, /* 256 */ - {CS4270_MODE_2X, CS4270_MODE_DIV3}, /* 384 */ - {CS4270_MODE_1X, CS4270_MODE_DIV2}, /* 512 */ - {CS4270_MODE_1X, CS4270_MODE_DIV3}, /* 768 */ - {CS4270_MODE_1X, CS4270_MODE_DIV4} /* 1024 */ -}; - /* * Program the CS4270 with the given hardware parameters. * @@ -388,7 +385,7 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, ratio = cs4270->mclk / rate; /* MCLK/LRCK ratio */ for (i = 0; i < NUM_MCLK_RATIOS; i++) { - if (mclk_ratios[i] == ratio) + if (cs4270_mode_ratios[i].ratio == ratio) break; } @@ -669,7 +666,7 @@ error: return ret; } -#endif +#endif /* USE_I2C*/ struct snd_soc_codec_dai cs4270_dai = { .name = "CS4270", @@ -687,10 +684,6 @@ struct snd_soc_codec_dai cs4270_dai = { .rates = 0, .formats = CS4270_FORMATS, }, - .dai_ops = { - .set_sysclk = cs4270_set_dai_sysclk, - .set_fmt = cs4270_set_dai_fmt, - } }; EXPORT_SYMBOL_GPL(cs4270_dai); @@ -752,6 +745,8 @@ static int cs4270_probe(struct platform_device *pdev) if (codec->control_data) { /* Initialize codec ops */ cs4270_dai.ops.hw_params = cs4270_hw_params; + cs4270_dai.dai_ops.set_sysclk = cs4270_set_dai_sysclk; + cs4270_dai.dai_ops.set_fmt = cs4270_set_dai_fmt; #ifdef CONFIG_SND_SOC_CS4270_HWMUTE cs4270_dai.dai_ops.digital_mute = cs4270_mute; #endif