ARM: mxs: detect SoC by checking CHIPID register

Both imx23 and imx28 have CHIPID register at address 0x8001c310, which
can be used to identify the SoC.  This patch changes cpu_is_xxx and
__arch_decomp_setup to use this CHIPID register than machine type to
detect the chip between imx23 and imx28, so that we do not need to
change these functions whenever a new board/machine gets added.

Suggested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
This commit is contained in:
Shawn Guo 2012-01-06 09:11:40 +08:00
Родитель dcd6c92267
Коммит 845da6bf65
3 изменённых файлов: 23 добавлений и 20 удалений

Просмотреть файл

@ -18,4 +18,5 @@
#define HW_DIGCTL_CTRL 0x0
#define BP_DIGCTL_CTRL_SAIF_CLKMUX 10
#define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10)
#define HW_DIGCTL_CHIPID 0x310
#endif

Просмотреть файл

@ -23,21 +23,9 @@
#include <linux/io.h>
#endif
#include <asm/mach-types.h>
#include <mach/digctl.h>
#include <mach/hardware.h>
/*
* MXS CPU types
*/
#define cpu_is_mx23() ( \
machine_is_mx23evk() || \
machine_is_stmp378x() || \
0)
#define cpu_is_mx28() ( \
machine_is_mx28evk() || \
machine_is_m28evk() || \
machine_is_tx28() || \
0)
/*
* IO addresses common to MXS-based
*/
@ -109,6 +97,21 @@ static inline void __mxs_togl(u32 mask, void __iomem *reg)
{
__raw_writel(mask, reg + MXS_TOG_ADDR);
}
/*
* MXS CPU types
*/
#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID)
static inline int cpu_is_mx23(void)
{
return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780);
}
static inline int cpu_is_mx28(void)
{
return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800);
}
#endif
#endif /* __MACH_MXS_H__ */

Просмотреть файл

@ -18,8 +18,6 @@
#ifndef __MACH_MXS_UNCOMPRESS_H__
#define __MACH_MXS_UNCOMPRESS_H__
#include <asm/mach-types.h>
unsigned long mxs_duart_base;
#define MXS_DUART(x) (*(volatile unsigned long *)(mxs_duart_base + (x)))
@ -55,16 +53,17 @@ static inline void flush(void)
#define MX23_DUART_BASE_ADDR 0x80070000
#define MX28_DUART_BASE_ADDR 0x80074000
#define MXS_DIGCTL_CHIPID 0x8001c310
static inline void __arch_decomp_setup(unsigned long arch_id)
{
switch (arch_id) {
case MACH_TYPE_MX23EVK:
u16 chipid = (*(volatile unsigned long *) MXS_DIGCTL_CHIPID) >> 16;
switch (chipid) {
case 0x3780:
mxs_duart_base = MX23_DUART_BASE_ADDR;
break;
case MACH_TYPE_MX28EVK:
case MACH_TYPE_M28EVK:
case MACH_TYPE_TX28:
case 0x2800:
mxs_duart_base = MX28_DUART_BASE_ADDR;
break;
default: