[ARM] Kirkwood: add LaCie d2 Network v2 support
Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
This commit is contained in:
Simon Guinot
Nicolas Pitre
Родитель
709406494c
Коммит
84712e9aa4
|
|
@ -106,6 +106,12 @@ config MACH_NETSPACE_MAX_V2
|
|||
Say 'Y' here if you want your kernel to support the
|
||||
LaCie Network Space Max v2 NAS.
|
||||
|
||||
config MACH_D2NET_V2
|
||||
bool "LaCie d2 Network v2 NAS Board"
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
LaCie d2 Network v2 NAS.
|
||||
|
||||
config MACH_NET2BIG_V2
|
||||
bool "LaCie 2Big Network v2 NAS Board"
|
||||
help
|
||||
|
|
|
|||
|
|
@ -14,6 +14,7 @@ obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
|
|||
obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o
|
||||
obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o
|
||||
obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o
|
||||
obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o
|
||||
obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o
|
||||
obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o
|
||||
obj-$(CONFIG_MACH_T5325) += t5325-setup.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,323 @@
|
|||
/*
|
||||
* arch/arm/mach-kirkwood/d2net_v2-setup.c
|
||||
*
|
||||
* LaCie d2 Network Space v2 Board Setup
|
||||
*
|
||||
* Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/spi/flash.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/ata_platform.h>
|
||||
#include <linux/mv643xx_eth.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/i2c/at24.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/leds.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/time.h>
|
||||
#include <mach/kirkwood.h>
|
||||
#include <mach/leds-ns2.h>
|
||||
#include <plat/time.h>
|
||||
#include "common.h"
|
||||
#include "mpp.h"
|
||||
|
||||
/*****************************************************************************
|
||||
* 512KB SPI Flash on Boot Device
|
||||
****************************************************************************/
|
||||
|
||||
static struct mtd_partition d2net_v2_flash_parts[] = {
|
||||
{
|
||||
.name = "u-boot",
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
.offset = 0,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct flash_platform_data d2net_v2_flash = {
|
||||
.type = "mx25l4005a",
|
||||
.name = "spi_flash",
|
||||
.parts = d2net_v2_flash_parts,
|
||||
.nr_parts = ARRAY_SIZE(d2net_v2_flash_parts),
|
||||
};
|
||||
|
||||
static struct spi_board_info __initdata d2net_v2_spi_slave_info[] = {
|
||||
{
|
||||
.modalias = "m25p80",
|
||||
.platform_data = &d2net_v2_flash,
|
||||
.irq = -1,
|
||||
.max_speed_hz = 20000000,
|
||||
.bus_num = 0,
|
||||
.chip_select = 0,
|
||||
},
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* Ethernet
|
||||
****************************************************************************/
|
||||
|
||||
static struct mv643xx_eth_platform_data d2net_v2_ge00_data = {
|
||||
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* I2C devices
|
||||
****************************************************************************/
|
||||
|
||||
static struct at24_platform_data at24c04 = {
|
||||
.byte_len = SZ_4K / 8,
|
||||
.page_size = 16,
|
||||
};
|
||||
|
||||
/*
|
||||
* i2c addr | chip | description
|
||||
* 0x50 | HT24LC04 | eeprom (512B)
|
||||
*/
|
||||
|
||||
static struct i2c_board_info __initdata d2net_v2_i2c_info[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("24c04", 0x50),
|
||||
.platform_data = &at24c04,
|
||||
}
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* SATA
|
||||
****************************************************************************/
|
||||
|
||||
static struct mv_sata_platform_data d2net_v2_sata_data = {
|
||||
.n_ports = 2,
|
||||
};
|
||||
|
||||
#define D2NET_V2_GPIO_SATA0_POWER 16
|
||||
|
||||
static void __init d2net_v2_sata_power_init(void)
|
||||
{
|
||||
int err;
|
||||
|
||||
err = gpio_request(D2NET_V2_GPIO_SATA0_POWER, "SATA0 power");
|
||||
if (err == 0) {
|
||||
err = gpio_direction_output(D2NET_V2_GPIO_SATA0_POWER, 1);
|
||||
if (err)
|
||||
gpio_free(D2NET_V2_GPIO_SATA0_POWER);
|
||||
}
|
||||
if (err)
|
||||
pr_err("d2net_v2: failed to configure SATA0 power GPIO\n");
|
||||
}
|
||||
|
||||
/*****************************************************************************
|
||||
* GPIO keys
|
||||
****************************************************************************/
|
||||
|
||||
#define D2NET_V2_GPIO_PUSH_BUTTON 34
|
||||
#define D2NET_V2_GPIO_POWER_SWITCH_ON 13
|
||||
#define D2NET_V2_GPIO_POWER_SWITCH_OFF 15
|
||||
|
||||
#define D2NET_V2_SWITCH_POWER_ON 0x1
|
||||
#define D2NET_V2_SWITCH_POWER_OFF 0x2
|
||||
|
||||
static struct gpio_keys_button d2net_v2_buttons[] = {
|
||||
[0] = {
|
||||
.type = EV_SW,
|
||||
.code = D2NET_V2_SWITCH_POWER_ON,
|
||||
.gpio = D2NET_V2_GPIO_POWER_SWITCH_ON,
|
||||
.desc = "Back power switch (on|auto)",
|
||||
.active_low = 0,
|
||||
},
|
||||
[1] = {
|
||||
.type = EV_SW,
|
||||
.code = D2NET_V2_SWITCH_POWER_OFF,
|
||||
.gpio = D2NET_V2_GPIO_POWER_SWITCH_OFF,
|
||||
.desc = "Back power switch (auto|off)",
|
||||
.active_low = 0,
|
||||
},
|
||||
[2] = {
|
||||
.code = KEY_POWER,
|
||||
.gpio = D2NET_V2_GPIO_PUSH_BUTTON,
|
||||
.desc = "Front Push Button",
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_platform_data d2net_v2_button_data = {
|
||||
.buttons = d2net_v2_buttons,
|
||||
.nbuttons = ARRAY_SIZE(d2net_v2_buttons),
|
||||
};
|
||||
|
||||
static struct platform_device d2net_v2_gpio_buttons = {
|
||||
.name = "gpio-keys",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &d2net_v2_button_data,
|
||||
},
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* GPIO LEDs
|
||||
****************************************************************************/
|
||||
|
||||
#define D2NET_V2_GPIO_RED_LED 12
|
||||
|
||||
static struct gpio_led d2net_v2_gpio_led_pins[] = {
|
||||
{
|
||||
.name = "d2net_v2:red:fail",
|
||||
.gpio = D2NET_V2_GPIO_RED_LED,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_led_platform_data d2net_v2_gpio_leds_data = {
|
||||
.num_leds = ARRAY_SIZE(d2net_v2_gpio_led_pins),
|
||||
.leds = d2net_v2_gpio_led_pins,
|
||||
};
|
||||
|
||||
static struct platform_device d2net_v2_gpio_leds = {
|
||||
.name = "leds-gpio",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &d2net_v2_gpio_leds_data,
|
||||
},
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* Dual-GPIO CPLD LEDs
|
||||
****************************************************************************/
|
||||
|
||||
#define D2NET_V2_GPIO_BLUE_LED_SLOW 29
|
||||
#define D2NET_V2_GPIO_BLUE_LED_CMD 30
|
||||
|
||||
static struct ns2_led d2net_v2_led_pins[] = {
|
||||
{
|
||||
.name = "d2net_v2:blue:sata",
|
||||
.cmd = D2NET_V2_GPIO_BLUE_LED_CMD,
|
||||
.slow = D2NET_V2_GPIO_BLUE_LED_SLOW,
|
||||
},
|
||||
};
|
||||
|
||||
static struct ns2_led_platform_data d2net_v2_leds_data = {
|
||||
.num_leds = ARRAY_SIZE(d2net_v2_led_pins),
|
||||
.leds = d2net_v2_led_pins,
|
||||
};
|
||||
|
||||
static struct platform_device d2net_v2_leds = {
|
||||
.name = "leds-ns2",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &d2net_v2_leds_data,
|
||||
},
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* Timer
|
||||
****************************************************************************/
|
||||
|
||||
static void d2net_v2_timer_init(void)
|
||||
{
|
||||
kirkwood_tclk = 166666667;
|
||||
orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
|
||||
}
|
||||
|
||||
struct sys_timer d2net_v2_timer = {
|
||||
.init = d2net_v2_timer_init,
|
||||
};
|
||||
|
||||
/*****************************************************************************
|
||||
* General Setup
|
||||
****************************************************************************/
|
||||
|
||||
static unsigned int d2net_v2_mpp_config[] __initdata = {
|
||||
MPP0_SPI_SCn,
|
||||
MPP1_SPI_MOSI,
|
||||
MPP2_SPI_SCK,
|
||||
MPP3_SPI_MISO,
|
||||
MPP6_SYSRST_OUTn,
|
||||
MPP7_GPO, /* Request power-off */
|
||||
MPP8_TW0_SDA,
|
||||
MPP9_TW0_SCK,
|
||||
MPP10_UART0_TXD,
|
||||
MPP11_UART0_RXD,
|
||||
MPP12_GPO, /* Red led */
|
||||
MPP13_GPIO, /* Rear power switch (on|auto) */
|
||||
MPP14_GPIO, /* USB fuse */
|
||||
MPP15_GPIO, /* Rear power switch (auto|off) */
|
||||
MPP16_GPIO, /* SATA 0 power */
|
||||
MPP21_SATA0_ACTn,
|
||||
MPP24_GPIO, /* USB mode select */
|
||||
MPP26_GPIO, /* USB device vbus */
|
||||
MPP28_GPIO, /* USB enable host vbus */
|
||||
MPP29_GPIO, /* Blue led (slow register) */
|
||||
MPP30_GPIO, /* Blue led (command register) */
|
||||
MPP34_GPIO, /* Power button (1 = Released, 0 = Pushed) */
|
||||
MPP35_GPIO, /* Inhibit power-off */
|
||||
0
|
||||
};
|
||||
|
||||
#define D2NET_V2_GPIO_POWER_OFF 7
|
||||
|
||||
static void d2net_v2_power_off(void)
|
||||
{
|
||||
gpio_set_value(D2NET_V2_GPIO_POWER_OFF, 1);
|
||||
}
|
||||
|
||||
static void __init d2net_v2_init(void)
|
||||
{
|
||||
/*
|
||||
* Basic setup. Needs to be called early.
|
||||
*/
|
||||
kirkwood_init();
|
||||
kirkwood_mpp_conf(d2net_v2_mpp_config);
|
||||
|
||||
d2net_v2_sata_power_init();
|
||||
|
||||
kirkwood_ehci_init();
|
||||
kirkwood_ge00_init(&d2net_v2_ge00_data);
|
||||
kirkwood_sata_init(&d2net_v2_sata_data);
|
||||
kirkwood_uart0_init();
|
||||
spi_register_board_info(d2net_v2_spi_slave_info,
|
||||
ARRAY_SIZE(d2net_v2_spi_slave_info));
|
||||
kirkwood_spi_init();
|
||||
kirkwood_i2c_init();
|
||||
i2c_register_board_info(0, d2net_v2_i2c_info,
|
||||
ARRAY_SIZE(d2net_v2_i2c_info));
|
||||
|
||||
platform_device_register(&d2net_v2_leds);
|
||||
platform_device_register(&d2net_v2_gpio_leds);
|
||||
platform_device_register(&d2net_v2_gpio_buttons);
|
||||
|
||||
if (gpio_request(D2NET_V2_GPIO_POWER_OFF, "power-off") == 0 &&
|
||||
gpio_direction_output(D2NET_V2_GPIO_POWER_OFF, 0) == 0)
|
||||
pm_power_off = d2net_v2_power_off;
|
||||
else
|
||||
pr_err("d2net_v2: failed to configure power-off GPIO\n");
|
||||
}
|
||||
|
||||
MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
|
||||
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
|
||||
.io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
|
||||
.boot_params = 0x00000100,
|
||||
.init_machine = d2net_v2_init,
|
||||
.map_io = kirkwood_map_io,
|
||||
.init_irq = kirkwood_init_irq,
|
||||
.timer = &d2net_v2_timer,
|
||||
MACHINE_END
|
||||
|
|
@ -304,7 +304,7 @@ config LEDS_MC13783
|
|||
|
||||
config LEDS_NS2
|
||||
tristate "LED support for Network Space v2 GPIO LEDs"
|
||||
depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2
|
||||
depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2 || D2NET_V2
|
||||
default y
|
||||
help
|
||||
This option enable support for the dual-GPIO LED found on the
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче