diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index bfbc771a65f8..ac9e7516756e 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -1,6 +1,14 @@ Freescale i.MX Platforms Device Tree Bindings ----------------------------------------------- +i.MX23 Evaluation Kit +Required root node properties: + - compatible = "fsl,imx23-evk", "fsl,imx23"; + +i.MX28 Evaluation Kit +Required root node properties: + - compatible = "fsl,imx28-evk", "fsl,imx28"; + i.MX51 Babbage Board Required root node properties: - compatible = "fsl,imx51-babbage", "fsl,imx51"; @@ -29,6 +37,10 @@ i.MX6 Quad SABRE Lite Board Required root node properties: - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; +i.MX6 Quad SABRE Smart Device Board +Required root node properties: + - compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; + Generic i.MX boards ------------------- diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt new file mode 100644 index 000000000000..ded0398d3bdc --- /dev/null +++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt @@ -0,0 +1,19 @@ +* Freescale MXS DMA + +Required properties: +- compatible : Should be "fsl,-dma-apbh" or "fsl,-dma-apbx" +- reg : Should contain registers location and length + +Supported chips: +imx23, imx28. + +Examples: +dma-apbh@80004000 { + compatible = "fsl,imx28-dma-apbh"; + reg = <0x80004000 2000>; +}; + +dma-apbx@80024000 { + compatible = "fsl,imx28-dma-apbx"; + reg = <0x80024000 2000>; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt new file mode 100644 index 000000000000..0c35673f7a3e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt @@ -0,0 +1,87 @@ +* Freescale MXS GPIO controller + +The Freescale MXS GPIO controller is part of MXS PIN controller. The +GPIOs are organized in port/bank. Each port consists of 32 GPIOs. + +As the GPIO controller is embedded in the PIN controller and all the +GPIO ports share the same IO space with PIN controller, the GPIO node +will be represented as sub-nodes of MXS pinctrl node. + +Required properties for GPIO node: +- compatible : Should be "fsl,-gpio". The supported SoCs include + imx23 and imx28. +- interrupts : Should be the port interrupt shared by all 32 pins. +- gpio-controller : Marks the device node as a gpio controller. +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify optional parameters (currently + unused). +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells : Should be 2. The first cell is the GPIO number. + The second cell bits[3:0] is used to specify trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + +Note: Each GPIO port should have an alias correctly numbered in "aliases" +node. + +Examples: + +aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; +}; + +pinctrl@80018000 { + compatible = "fsl,imx28-pinctrl", "simple-bus"; + reg = <0x80018000 2000>; + + gpio0: gpio@0 { + compatible = "fsl,imx28-gpio"; + interrupts = <127>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@1 { + compatible = "fsl,imx28-gpio"; + interrupts = <126>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2 { + compatible = "fsl,imx28-gpio"; + interrupts = <125>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@3 { + compatible = "fsl,imx28-gpio"; + interrupts = <124>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@4 { + compatible = "fsl,imx28-gpio"; + interrupts = <123>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt new file mode 100644 index 000000000000..1bfc02de1b0c --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt @@ -0,0 +1,16 @@ +* Freescale MXS Inter IC (I2C) Controller + +Required properties: +- compatible: Should be "fsl,-i2c" +- reg: Should contain registers location and length +- interrupts: Should contain ERROR and DMA interrupts + +Examples: + +i2c0: i2c@80058000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-i2c"; + reg = <0x80058000 2000>; + interrupts = <111 68>; +}; diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt new file mode 100644 index 000000000000..14d870a9e3db --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt @@ -0,0 +1,25 @@ +* Freescale MXS MMC controller + +The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller +to support MMC, SD, and SDIO types of memory cards. + +Required properties: +- compatible: Should be "fsl,-mmc". The supported chips include + imx23 and imx28. +- reg: Should contain registers location and length +- interrupts: Should contain ERROR and DMA interrupts +- fsl,ssp-dma-channel: APBH DMA channel for the SSP +- bus-width: Number of data lines, can be <1>, <4>, or <8> + +Optional properties: +- wp-gpios: Specify GPIOs for write protection + +Examples: + +ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + reg = <0x80010000 2000>; + interrupts = <96 82>; + fsl,ssp-dma-channel = <0>; + bus-width = <8>; +}; diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index de439517dff0..7ab9e1a2d8be 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -14,7 +14,7 @@ Optional properties: Example: -fec@83fec000 { +ethernet@83fec000 { compatible = "fsl,imx51-fec", "fsl,imx27-fec"; reg = <0x83fec000 0x4000>; interrupts = <87>; diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt index a9c0406280e8..b462d0c54823 100644 --- a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt @@ -11,7 +11,7 @@ Optional properties: Example: -uart@73fbc000 { +serial@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 515c8c85cbbb..5e7601301b41 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -459,6 +459,7 @@ config ARCH_MXS select COMMON_CLK select HAVE_CLK_PREPARE select PINCTRL + select USE_OF help Support for Freescale MXS-based family of processors diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index e561adc1db0c..01a134141216 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -209,6 +209,14 @@ choice Say Y here if you want kernel low-level debugging support on i.MX50 or i.MX53. + config DEBUG_IMX6Q_UART2 + bool "i.MX6Q Debug UART2" + depends on SOC_IMX6Q + help + Say Y here if you want kernel low-level debugging support + on i.MX6Q UART2. This is correct for e.g. the SabreLite + board. + config DEBUG_IMX6Q_UART4 bool "i.MX6Q Debug UART4" depends on SOC_IMX6Q diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts new file mode 100644 index 000000000000..70bffa929b65 --- /dev/null +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -0,0 +1,43 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx23.dtsi" + +/ { + model = "Freescale i.MX23 Evaluation Kit"; + compatible = "fsl,imx23-evk", "fsl,imx23"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a &mmc0_pins_fixup>; + bus-width = <8>; + wp-gpios = <&gpio1 30 0>; + status = "okay"; + }; + }; + + apbx@80040000 { + duart: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi new file mode 100644 index 000000000000..8c5f9994f3fc --- /dev/null +++ b/arch/arm/boot/dts/imx23.dtsi @@ -0,0 +1,295 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&icoll>; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + apb@80000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x80000>; + ranges; + + apbh@80000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x40000>; + ranges; + + icoll: interrupt-controller@80000000 { + compatible = "fsl,imx23-icoll", "fsl,mxs-icoll"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x80000000 0x2000>; + }; + + dma-apbh@80004000 { + compatible = "fsl,imx23-dma-apbh"; + reg = <0x80004000 2000>; + }; + + ecc@80008000 { + reg = <0x80008000 2000>; + status = "disabled"; + }; + + bch@8000a000 { + reg = <0x8000a000 2000>; + status = "disabled"; + }; + + gpmi@8000c000 { + reg = <0x8000c000 2000>; + status = "disabled"; + }; + + ssp0: ssp@80010000 { + reg = <0x80010000 2000>; + interrupts = <15 14>; + fsl,ssp-dma-channel = <1>; + status = "disabled"; + }; + + etm@80014000 { + reg = <0x80014000 2000>; + status = "disabled"; + }; + + pinctrl@80018000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx23-pinctrl", "simple-bus"; + reg = <0x80018000 2000>; + + gpio0: gpio@0 { + compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + interrupts = <16>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@1 { + compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + interrupts = <17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2 { + compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + interrupts = <18>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + duart_pins_a: duart@0 { + reg = <0>; + fsl,pinmux-ids = <0x11a2 0x11b2>; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + mmc0_8bit_pins_a: mmc0-8bit@0 { + reg = <0>; + fsl,pinmux-ids = <0x2020 0x2030 0x2040 + 0x2050 0x0082 0x0092 0x00a2 + 0x00b2 0x2000 0x2010 0x2060>; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mmc0_pins_fixup: mmc0-pins-fixup { + fsl,pinmux-ids = <0x2010 0x2060>; + fsl,pull-up = <0>; + }; + }; + + digctl@8001c000 { + reg = <0x8001c000 2000>; + status = "disabled"; + }; + + emi@80020000 { + reg = <0x80020000 2000>; + status = "disabled"; + }; + + dma-apbx@80024000 { + compatible = "fsl,imx23-dma-apbx"; + reg = <0x80024000 2000>; + }; + + dcp@80028000 { + reg = <0x80028000 2000>; + status = "disabled"; + }; + + pxp@8002a000 { + reg = <0x8002a000 2000>; + status = "disabled"; + }; + + ocotp@8002c000 { + reg = <0x8002c000 2000>; + status = "disabled"; + }; + + axi-ahb@8002e000 { + reg = <0x8002e000 2000>; + status = "disabled"; + }; + + lcdif@80030000 { + reg = <0x80030000 2000>; + status = "disabled"; + }; + + ssp1: ssp@80034000 { + reg = <0x80034000 2000>; + interrupts = <2 20>; + fsl,ssp-dma-channel = <2>; + status = "disabled"; + }; + + tvenc@80038000 { + reg = <0x80038000 2000>; + status = "disabled"; + }; + }; + + apbx@80040000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80040000 0x40000>; + ranges; + + clkctl@80040000 { + reg = <0x80040000 2000>; + status = "disabled"; + }; + + saif0: saif@80042000 { + reg = <0x80042000 2000>; + status = "disabled"; + }; + + power@80044000 { + reg = <0x80044000 2000>; + status = "disabled"; + }; + + saif1: saif@80046000 { + reg = <0x80046000 2000>; + status = "disabled"; + }; + + audio-out@80048000 { + reg = <0x80048000 2000>; + status = "disabled"; + }; + + audio-in@8004c000 { + reg = <0x8004c000 2000>; + status = "disabled"; + }; + + lradc@80050000 { + reg = <0x80050000 2000>; + status = "disabled"; + }; + + spdif@80054000 { + reg = <0x80054000 2000>; + status = "disabled"; + }; + + i2c@80058000 { + reg = <0x80058000 2000>; + status = "disabled"; + }; + + rtc@8005c000 { + reg = <0x8005c000 2000>; + status = "disabled"; + }; + + pwm@80064000 { + reg = <0x80064000 2000>; + status = "disabled"; + }; + + timrot@80068000 { + reg = <0x80068000 2000>; + status = "disabled"; + }; + + auart0: serial@8006c000 { + reg = <0x8006c000 0x2000>; + status = "disabled"; + }; + + auart1: serial@8006e000 { + reg = <0x8006e000 0x2000>; + status = "disabled"; + }; + + duart: serial@80070000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80070000 0x2000>; + interrupts = <0>; + status = "disabled"; + }; + + usbphy@8007c000 { + reg = <0x8007c000 0x2000>; + status = "disabled"; + }; + }; + }; + + ahb@80080000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80080000 0x80000>; + ranges; + + usbctrl@80080000 { + reg = <0x80080000 0x10000>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts index a51a08fc2af9..2b0ff60247a4 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts @@ -27,22 +27,22 @@ status = "okay"; }; - uart@1000a000 { + serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; }; - uart@1000b000 { + serial@1000b000 { fsl,uart-has-rtscts; status = "okay"; }; - uart@1000c000 { + serial@1000c000 { fsl,uart-has-rtscts; status = "okay"; }; - fec@1002b000 { + ethernet@1002b000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index bc5e7d5ddd54..2b1a166d41f9 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -59,28 +59,28 @@ status = "disabled"; }; - uart1: uart@1000a000 { + uart1: serial@1000a000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000a000 0x1000>; interrupts = <20>; status = "disabled"; }; - uart2: uart@1000b000 { + uart2: serial@1000b000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000b000 0x1000>; interrupts = <19>; status = "disabled"; }; - uart3: uart@1000c000 { + uart3: serial@1000c000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000c000 0x1000>; interrupts = <18>; status = "disabled"; }; - uart4: uart@1000d000 { + uart4: serial@1000d000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000d000 0x1000>; interrupts = <17>; @@ -183,14 +183,14 @@ status = "disabled"; }; - uart5: uart@1001b000 { + uart5: serial@1001b000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1001b000 0x1000>; interrupts = <49>; status = "disabled"; }; - uart6: uart@1001c000 { + uart6: serial@1001c000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1001c000 0x1000>; interrupts = <48>; @@ -206,7 +206,7 @@ status = "disabled"; }; - fec: fec@1002b000 { + fec: ethernet@1002b000 { compatible = "fsl,imx27-fec"; reg = <0x1002b000 0x4000>; interrupts = <50>; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts new file mode 100644 index 000000000000..ee520a529cb4 --- /dev/null +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -0,0 +1,114 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Freescale i.MX28 Evaluation Kit"; + compatible = "fsl,imx28-evk", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <8>; + wp-gpios = <&gpio2 12 0>; + status = "okay"; + }; + + ssp1: ssp@80012000 { + compatible = "fsl,imx28-mmc"; + bus-width = <8>; + wp-gpios = <&gpio0 28 0>; + status = "okay"; + }; + }; + + apbx@80040000 { + saif0: saif@80042000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; + }; + + saif1: saif@80046000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; + }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + + }; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; + }; + + mac1: ethernet@800f4000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + + sound { + compatible = "fsl,imx28-evk-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "imx28-evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; +}; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi new file mode 100644 index 000000000000..4634cb861a59 --- /dev/null +++ b/arch/arm/boot/dts/imx28.dtsi @@ -0,0 +1,497 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&icoll>; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + saif0 = &saif0; + saif1 = &saif1; + }; + + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + apb@80000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x80000>; + ranges; + + apbh@80000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x3c900>; + ranges; + + icoll: interrupt-controller@80000000 { + compatible = "fsl,imx28-icoll", "fsl,mxs-icoll"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x80000000 0x2000>; + }; + + hsadc@80002000 { + reg = <0x80002000 2000>; + interrupts = <13 87>; + status = "disabled"; + }; + + dma-apbh@80004000 { + compatible = "fsl,imx28-dma-apbh"; + reg = <0x80004000 2000>; + }; + + perfmon@80006000 { + reg = <0x80006000 800>; + interrupts = <27>; + status = "disabled"; + }; + + bch@8000a000 { + reg = <0x8000a000 2000>; + interrupts = <41>; + status = "disabled"; + }; + + gpmi@8000c000 { + reg = <0x8000c000 2000>; + interrupts = <42 88>; + status = "disabled"; + }; + + ssp0: ssp@80010000 { + reg = <0x80010000 2000>; + interrupts = <96 82>; + fsl,ssp-dma-channel = <0>; + status = "disabled"; + }; + + ssp1: ssp@80012000 { + reg = <0x80012000 2000>; + interrupts = <97 83>; + fsl,ssp-dma-channel = <1>; + status = "disabled"; + }; + + ssp2: ssp@80014000 { + reg = <0x80014000 2000>; + interrupts = <98 84>; + fsl,ssp-dma-channel = <2>; + status = "disabled"; + }; + + ssp3: ssp@80016000 { + reg = <0x80016000 2000>; + interrupts = <99 85>; + fsl,ssp-dma-channel = <3>; + status = "disabled"; + }; + + pinctrl@80018000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-pinctrl", "simple-bus"; + reg = <0x80018000 2000>; + + gpio0: gpio@0 { + compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + interrupts = <127>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@1 { + compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + interrupts = <126>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2 { + compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + interrupts = <125>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@3 { + compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + interrupts = <124>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@4 { + compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + interrupts = <123>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + duart_pins_a: duart@0 { + reg = <0>; + fsl,pinmux-ids = <0x3102 0x3112>; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + mac0_pins_a: mac0@0 { + reg = <0>; + fsl,pinmux-ids = <0x4000 0x4010 0x4020 + 0x4030 0x4040 0x4060 0x4070 + 0x4080 0x4100>; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mac1_pins_a: mac1@0 { + reg = <0>; + fsl,pinmux-ids = <0x40f1 0x4091 0x40a1 + 0x40e1 0x40b1 0x40c1>; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mmc0_8bit_pins_a: mmc0-8bit@0 { + reg = <0>; + fsl,pinmux-ids = <0x2000 0x2010 0x2020 + 0x2030 0x2040 0x2050 0x2060 + 0x2070 0x2080 0x2090 0x20a0>; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mmc0_cd_cfg: mmc0-cd-cfg { + fsl,pinmux-ids = <0x2090>; + fsl,pull-up = <0>; + }; + + mmc0_sck_cfg: mmc0-sck-cfg { + fsl,pinmux-ids = <0x20a0>; + fsl,drive-strength = <2>; + fsl,pull-up = <0>; + }; + + i2c0_pins_a: i2c0@0 { + reg = <0>; + fsl,pinmux-ids = <0x3180 0x3190>; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + saif0_pins_a: saif0@0 { + reg = <0>; + fsl,pinmux-ids = + <0x3140 0x3150 0x3160 0x3170>; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + saif1_pins_a: saif1@0 { + reg = <0>; + fsl,pinmux-ids = <0x31a0>; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + }; + + digctl@8001c000 { + reg = <0x8001c000 2000>; + interrupts = <89>; + status = "disabled"; + }; + + etm@80022000 { + reg = <0x80022000 2000>; + status = "disabled"; + }; + + dma-apbx@80024000 { + compatible = "fsl,imx28-dma-apbx"; + reg = <0x80024000 2000>; + }; + + dcp@80028000 { + reg = <0x80028000 2000>; + interrupts = <52 53 54>; + status = "disabled"; + }; + + pxp@8002a000 { + reg = <0x8002a000 2000>; + interrupts = <39>; + status = "disabled"; + }; + + ocotp@8002c000 { + reg = <0x8002c000 2000>; + status = "disabled"; + }; + + axi-ahb@8002e000 { + reg = <0x8002e000 2000>; + status = "disabled"; + }; + + lcdif@80030000 { + reg = <0x80030000 2000>; + interrupts = <38 86>; + status = "disabled"; + }; + + can0: can@80032000 { + reg = <0x80032000 2000>; + interrupts = <8>; + status = "disabled"; + }; + + can1: can@80034000 { + reg = <0x80034000 2000>; + interrupts = <9>; + status = "disabled"; + }; + + simdbg@8003c000 { + reg = <0x8003c000 200>; + status = "disabled"; + }; + + simgpmisel@8003c200 { + reg = <0x8003c200 100>; + status = "disabled"; + }; + + simsspsel@8003c300 { + reg = <0x8003c300 100>; + status = "disabled"; + }; + + simmemsel@8003c400 { + reg = <0x8003c400 100>; + status = "disabled"; + }; + + gpiomon@8003c500 { + reg = <0x8003c500 100>; + status = "disabled"; + }; + + simenet@8003c700 { + reg = <0x8003c700 100>; + status = "disabled"; + }; + + armjtag@8003c800 { + reg = <0x8003c800 100>; + status = "disabled"; + }; + }; + + apbx@80040000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80040000 0x40000>; + ranges; + + clkctl@80040000 { + reg = <0x80040000 2000>; + status = "disabled"; + }; + + saif0: saif@80042000 { + compatible = "fsl,imx28-saif"; + reg = <0x80042000 2000>; + interrupts = <59 80>; + fsl,saif-dma-channel = <4>; + status = "disabled"; + }; + + power@80044000 { + reg = <0x80044000 2000>; + status = "disabled"; + }; + + saif1: saif@80046000 { + compatible = "fsl,imx28-saif"; + reg = <0x80046000 2000>; + interrupts = <58 81>; + fsl,saif-dma-channel = <5>; + status = "disabled"; + }; + + lradc@80050000 { + reg = <0x80050000 2000>; + status = "disabled"; + }; + + spdif@80054000 { + reg = <0x80054000 2000>; + interrupts = <45 66>; + status = "disabled"; + }; + + rtc@80056000 { + reg = <0x80056000 2000>; + interrupts = <28 29>; + status = "disabled"; + }; + + i2c0: i2c@80058000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-i2c"; + reg = <0x80058000 2000>; + interrupts = <111 68>; + status = "disabled"; + }; + + i2c1: i2c@8005a000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-i2c"; + reg = <0x8005a000 2000>; + interrupts = <110 69>; + status = "disabled"; + }; + + pwm@80064000 { + reg = <0x80064000 2000>; + status = "disabled"; + }; + + timrot@80068000 { + reg = <0x80068000 2000>; + status = "disabled"; + }; + + auart0: serial@8006a000 { + reg = <0x8006a000 0x2000>; + interrupts = <112 70 71>; + status = "disabled"; + }; + + auart1: serial@8006c000 { + reg = <0x8006c000 0x2000>; + interrupts = <113 72 73>; + status = "disabled"; + }; + + auart2: serial@8006e000 { + reg = <0x8006e000 0x2000>; + interrupts = <114 74 75>; + status = "disabled"; + }; + + auart3: serial@80070000 { + reg = <0x80070000 0x2000>; + interrupts = <115 76 77>; + status = "disabled"; + }; + + auart4: serial@80072000 { + reg = <0x80072000 0x2000>; + interrupts = <116 78 79>; + status = "disabled"; + }; + + duart: serial@80074000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80074000 0x1000>; + interrupts = <47>; + status = "disabled"; + }; + + usbphy0: usbphy@8007c000 { + reg = <0x8007c000 0x2000>; + status = "disabled"; + }; + + usbphy1: usbphy@8007e000 { + reg = <0x8007e000 0x2000>; + status = "disabled"; + }; + }; + }; + + ahb@80080000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80080000 0x80000>; + ranges; + + usbctrl0: usbctrl@80080000 { + reg = <0x80080000 0x10000>; + status = "disabled"; + }; + + usbctrl1: usbctrl@80090000 { + reg = <0x80090000 0x10000>; + status = "disabled"; + }; + + dflpt@800c0000 { + reg = <0x800c0000 0x10000>; + status = "disabled"; + }; + + mac0: ethernet@800f0000 { + compatible = "fsl,imx28-fec"; + reg = <0x800f0000 0x4000>; + interrupts = <101>; + status = "disabled"; + }; + + mac1: ethernet@800f4000 { + compatible = "fsl,imx28-fec"; + reg = <0x800f4000 0x4000>; + interrupts = <102>; + status = "disabled"; + }; + + switch@800f8000 { + reg = <0x800f8000 0x8000>; + status = "disabled"; + }; + + }; +}; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 9949e6060dee..de065b5976e6 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -17,10 +17,6 @@ model = "Freescale i.MX51 Babbage Board"; compatible = "fsl,imx51-babbage", "fsl,imx51"; - chosen { - bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait"; - }; - memory { reg = <0x90000000 0x20000000>; }; @@ -40,7 +36,7 @@ status = "okay"; }; - uart3: uart@7000c000 { + uart3: serial@7000c000 { fsl,uart-has-rtscts; status = "okay"; }; @@ -166,6 +162,11 @@ }; }; }; + + ssi2: ssi@70014000 { + fsl,mode = "i2s-slave"; + status = "okay"; + }; }; wdog@73f98000 { /* WDOG1 */ @@ -177,12 +178,12 @@ reg = <0x73fa8000 0x4000>; }; - uart1: uart@73fbc000 { + uart1: serial@73fbc000 { fsl,uart-has-rtscts; status = "okay"; }; - uart2: uart@73fc0000 { + uart2: serial@73fc0000 { status = "okay"; }; }; @@ -195,13 +196,20 @@ i2c@83fc4000 { /* I2C2 */ status = "okay"; - codec: sgtl5000@0a { + sgtl5000: codec@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + clock-frequency = <26000000>; + VDDA-supply = <&vdig_reg>; + VDDIO-supply = <&vvideo_reg>; }; }; - fec@83fec000 { + audmux@83fd0000 { + status = "okay"; + }; + + ethernet@83fec000 { phy-mode = "mii"; status = "okay"; }; @@ -218,4 +226,18 @@ gpio-key,wakeup; }; }; + + sound { + compatible = "fsl,imx51-babbage-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx51-babbage-sgtl5000"; + ssi-controller = <&ssi2>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <2>; + mux-ext-port = <3>; + }; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 6663986fe1c8..bfa65abe8ef2 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -86,7 +86,7 @@ status = "disabled"; }; - uart3: uart@7000c000 { + uart3: serial@7000c000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x7000c000 0x4000>; interrupts = <33>; @@ -102,6 +102,15 @@ status = "disabled"; }; + ssi2: ssi@70014000 { + compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; + reg = <0x70014000 0x4000>; + interrupts = <30>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ + status = "disabled"; + }; + esdhc@70020000 { /* ESDHC3 */ compatible = "fsl,imx51-esdhc"; reg = <0x70020000 0x4000>; @@ -171,14 +180,14 @@ status = "disabled"; }; - uart1: uart@73fbc000 { + uart1: serial@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; status = "disabled"; }; - uart2: uart@73fc0000 { + uart2: serial@73fc0000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fc0000 0x4000>; interrupts = <32>; @@ -235,7 +244,31 @@ status = "disabled"; }; - fec@83fec000 { + ssi1: ssi@83fcc000 { + compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; + reg = <0x83fcc000 0x4000>; + interrupts = <29>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ + status = "disabled"; + }; + + audmux@83fd0000 { + compatible = "fsl,imx51-audmux", "fsl,imx31-audmux"; + reg = <0x83fd0000 0x4000>; + status = "disabled"; + }; + + ssi3: ssi@83fe8000 { + compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; + reg = <0x83fe8000 0x4000>; + interrupts = <96>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */ + status = "disabled"; + }; + + ethernet@83fec000 { compatible = "fsl,imx51-fec", "fsl,imx27-fec"; reg = <0x83fec000 0x4000>; interrupts = <87>; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index 2dccce46ed81..5b8eafcdbeec 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -17,10 +17,6 @@ model = "Freescale i.MX53 Automotive Reference Design Board"; compatible = "fsl,imx53-ard", "fsl,imx53"; - chosen { - bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait"; - }; - memory { reg = <0x70000000 0x40000000>; }; @@ -44,7 +40,7 @@ reg = <0x53fa8000 0x4000>; }; - uart1: uart@53fbc000 { + uart1: serial@53fbc000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts index 5bac4aa4800b..9c798034675e 100644 --- a/arch/arm/boot/dts/imx53-evk.dts +++ b/arch/arm/boot/dts/imx53-evk.dts @@ -17,10 +17,6 @@ model = "Freescale i.MX53 Evaluation Kit"; compatible = "fsl,imx53-evk", "fsl,imx53"; - chosen { - bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait"; - }; - memory { reg = <0x70000000 0x80000000>; }; @@ -75,7 +71,7 @@ reg = <0x53fa8000 0x4000>; }; - uart1: uart@53fbc000 { + uart1: serial@53fbc000 { status = "okay"; }; }; @@ -99,7 +95,7 @@ }; }; - fec@63fec000 { + ethernet@63fec000 { phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 5c57c8672c36..2d803a9a6949 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -17,10 +17,6 @@ model = "Freescale i.MX53 Quick Start Board"; compatible = "fsl,imx53-qsb", "fsl,imx53"; - chosen { - bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait"; - }; - memory { reg = <0x70000000 0x40000000>; }; @@ -33,6 +29,11 @@ status = "okay"; }; + ssi2: ssi@50014000 { + fsl,mode = "i2s-slave"; + status = "okay"; + }; + esdhc@50020000 { /* ESDHC3 */ cd-gpios = <&gpio3 11 0>; wp-gpios = <&gpio3 12 0>; @@ -49,7 +50,7 @@ reg = <0x53fa8000 0x4000>; }; - uart1: uart@53fbc000 { + uart1: serial@53fbc000 { status = "okay"; }; }; @@ -62,9 +63,11 @@ i2c@63fc4000 { /* I2C2 */ status = "okay"; - codec: sgtl5000@0a { + sgtl5000: codec@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + VDDA-supply = <®_3p2v>; + VDDIO-supply = <®_3p2v>; }; }; @@ -77,12 +80,88 @@ }; pmic: dialog@48 { - compatible = "dialog,da9053", "dialog,da9052"; + compatible = "dlg,da9053-aa", "dlg,da9052"; reg = <0x48>; + + regulators { + buck0 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + }; + + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + }; + + buck2 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + }; + + buck3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + }; + + ldo4 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + }; + + ldo6 { + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + }; + + ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + }; + + ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + }; + + ldo10 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + }; + + ldo11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + }; + + ldo12 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3650000>; + }; + + ldo13 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + }; + }; }; }; - fec@63fec000 { + audmux@63fd0000 { + status = "okay"; + }; + + ethernet@63fec000 { phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 0>; status = "okay"; @@ -122,4 +201,30 @@ linux,default-trigger = "heartbeat"; }; }; + + regulators { + compatible = "simple-bus"; + + reg_3p2v: 3p2v { + compatible = "regulator-fixed"; + regulator-name = "3P2V"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + }; + }; + + sound { + compatible = "fsl,imx53-qsb-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx53-qsb-sgtl5000"; + ssi-controller = <&ssi2>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <2>; + mux-ext-port = <5>; + }; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 139138a556b0..08091029168e 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -17,10 +17,6 @@ model = "Freescale i.MX53 Smart Mobile Reference Design Board"; compatible = "fsl,imx53-smd", "fsl,imx53"; - chosen { - bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait"; - }; - memory { reg = <0x70000000 0x40000000>; }; @@ -39,7 +35,7 @@ status = "okay"; }; - uart3: uart@5000c000 { + uart3: serial@5000c000 { fsl,uart-has-rtscts; status = "okay"; }; @@ -90,11 +86,11 @@ reg = <0x53fa8000 0x4000>; }; - uart1: uart@53fbc000 { + uart1: serial@53fbc000 { status = "okay"; }; - uart2: uart@53fc0000 { + uart2: serial@53fc0000 { status = "okay"; }; }; @@ -142,7 +138,7 @@ }; }; - fec@63fec000 { + ethernet@63fec000 { phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 5dd91b942c91..e3e869470cd3 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -88,7 +88,7 @@ status = "disabled"; }; - uart3: uart@5000c000 { + uart3: serial@5000c000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x5000c000 0x4000>; interrupts = <33>; @@ -104,6 +104,15 @@ status = "disabled"; }; + ssi2: ssi@50014000 { + compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; + reg = <0x50014000 0x4000>; + interrupts = <30>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ + status = "disabled"; + }; + esdhc@50020000 { /* ESDHC3 */ compatible = "fsl,imx53-esdhc"; reg = <0x50020000 0x4000>; @@ -173,14 +182,14 @@ status = "disabled"; }; - uart1: uart@53fbc000 { + uart1: serial@53fbc000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53fbc000 0x4000>; interrupts = <31>; status = "disabled"; }; - uart2: uart@53fc0000 { + uart2: serial@53fc0000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53fc0000 0x4000>; interrupts = <32>; @@ -226,7 +235,7 @@ status = "disabled"; }; - uart4: uart@53ff0000 { + uart4: serial@53ff0000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53ff0000 0x4000>; interrupts = <13>; @@ -241,7 +250,7 @@ reg = <0x60000000 0x10000000>; ranges; - uart5: uart@63f90000 { + uart5: serial@63f90000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x63f90000 0x4000>; interrupts = <86>; @@ -290,7 +299,31 @@ status = "disabled"; }; - fec@63fec000 { + ssi1: ssi@63fcc000 { + compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; + reg = <0x63fcc000 0x4000>; + interrupts = <29>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ + status = "disabled"; + }; + + audmux@63fd0000 { + compatible = "fsl,imx53-audmux", "fsl,imx31-audmux"; + reg = <0x63fd0000 0x4000>; + status = "disabled"; + }; + + ssi3: ssi@63fe8000 { + compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; + reg = <0x63fe8000 0x4000>; + interrupts = <96>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */ + status = "disabled"; + }; + + ethernet@63fec000 { compatible = "fsl,imx53-fec", "fsl,imx25-fec"; reg = <0x63fec000 0x4000>; interrupts = <87>; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index d2eaf521c9fd..db4c6096c562 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -17,19 +17,14 @@ model = "Freescale i.MX6 Quad Armadillo2 Board"; compatible = "fsl,imx6q-arm2", "fsl,imx6q"; - chosen { - bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait"; - }; - memory { reg = <0x10000000 0x80000000>; }; soc { aips-bus@02100000 { /* AIPS2 */ - enet@02188000 { + ethernet@02188000 { phy-mode = "rgmii"; - local-mac-address = [00 04 9F 01 1B 61]; status = "okay"; }; @@ -37,16 +32,20 @@ cd-gpios = <&gpio6 11 0>; wp-gpios = <&gpio6 14 0>; vmmc-supply = <®_3p3v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; status = "okay"; }; usdhc@0219c000 { /* uSDHC4 */ non-removable; vmmc-supply = <®_3p3v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4_1>; status = "okay"; }; - uart4: uart@021f0000 { + uart4: serial@021f0000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 4663a4e5a285..e0ec92973e7e 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -22,8 +22,30 @@ }; soc { + aips-bus@02000000 { /* AIPS1 */ + spba-bus@02000000 { + ecspi@02008000 { /* eCSPI1 */ + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 0>; + status = "okay"; + + flash: m25p80@0 { + compatible = "sst,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; + }; + + ssi1: ssi@02028000 { + fsl,mode = "i2s-slave"; + status = "okay"; + }; + }; + + }; + aips-bus@02100000 { /* AIPS2 */ - enet@02188000 { + ethernet@02188000 { phy-mode = "rgmii"; phy-reset-gpios = <&gpio3 23 0>; status = "okay"; @@ -43,13 +65,23 @@ status = "okay"; }; - uart2: uart@021e8000 { + audmux@021d8000 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; + }; + + uart2: serial@021e8000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial2_1>; }; i2c@021a0000 { /* I2C1 */ status = "okay"; clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; @@ -80,4 +112,18 @@ regulator-always-on; }; }; + + sound { + compatible = "fsl,imx6q-sabrelite-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-sabrelite-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; }; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts new file mode 100644 index 000000000000..07509a181178 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -0,0 +1,53 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx6q.dtsi" + +/ { + model = "Freescale i.MX6Q SABRE Smart Device Board"; + compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + soc { + + aips-bus@02000000 { /* AIPS1 */ + spba-bus@02000000 { + uart1: serial@02020000 { + status = "okay"; + }; + }; + }; + + aips-bus@02100000 { /* AIPS2 */ + ethernet@02188000 { + phy-mode = "rgmii"; + status = "okay"; + }; + + usdhc@02194000 { /* uSDHC2 */ + cd-gpios = <&gpio2 2 0>; + wp-gpios = <&gpio2 3 0>; + status = "okay"; + }; + + usdhc@02198000 { /* uSDHC3 */ + cd-gpios = <&gpio2 0 0>; + wp-gpios = <&gpio2 1 0>; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 4905f51a106f..8c90cbac945f 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -165,7 +165,7 @@ status = "disabled"; }; - uart1: uart@02020000 { + uart1: serial@02020000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 0x04>; @@ -177,19 +177,31 @@ interrupts = <0 51 0x04>; }; - ssi@02028000 { /* SSI1 */ + ssi1: ssi@02028000 { + compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 0x04>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <38 37>; + status = "disabled"; }; - ssi@0202c000 { /* SSI2 */ + ssi2: ssi@0202c000 { + compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 0x04>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <42 41>; + status = "disabled"; }; - ssi@02030000 { /* SSI3 */ + ssi3: ssi@02030000 { + compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 0x04>; + fsl,fifo-depth = <15>; + fsl,ssi-dma-events = <46 45>; + status = "disabled"; }; asrc@02034000 { @@ -346,6 +358,90 @@ compatible = "fsl,imx6q-anatop"; reg = <0x020c8000 0x1000>; interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; + + regulator-1p1@110 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1375000>; + regulator-always-on; + anatop-reg-offset = <0x110>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <4>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1375000>; + }; + + regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + }; + + regulator-2p5@130 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2750000>; + regulator-always-on; + anatop-reg-offset = <0x130>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2000000>; + anatop-max-voltage = <2750000>; + }; + + regulator-vddcore@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "cpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + regulator-vddpu@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + regulator-vddsoc@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; }; usbphy@020c9000 { /* USBPHY1 */ @@ -386,7 +482,62 @@ }; iomuxc@020e0000 { + compatible = "fsl,imx6q-iomuxc"; reg = <0x020e0000 0x4000>; + + /* shared pinctrl settings */ + audmux { + pinctrl_audmux_1: audmux-1 { + fsl,pins = <18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */ + 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */ + 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */ + 3 0x80000000>; /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */ + }; + }; + + i2c1 { + pinctrl_i2c1_1: i2c1grp-1 { + fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */ + 196 0x4001b8b1>; /* MX6Q_PAD_EIM_D28__I2C1_SDA */ + }; + }; + + serial2 { + pinctrl_serial2_1: serial2grp-1 { + fsl,pins = <183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */ + 191 0x1b0b1>; /* MX6Q_PAD_EIM_D27__UART2_RXD */ + }; + }; + + usdhc3 { + pinctrl_usdhc3_1: usdhc3grp-1 { + fsl,pins = <1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ + 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ + 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ + 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ + 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ + 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ + 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */ + 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */ + 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */ + 1241 0x17059>; /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */ + }; + }; + + usdhc4 { + pinctrl_usdhc4_1: usdhc4grp-1 { + fsl,pins = <1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ + 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ + 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ + 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ + 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ + 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ + 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */ + 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */ + 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */ + 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ + }; + }; }; dcic@020e4000 { /* DCIC1 */ @@ -422,7 +573,7 @@ reg = <0x0217c000 0x4000>; }; - enet@02188000 { + ethernet@02188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts = <0 118 0x04 0 119 0x04>; @@ -527,7 +678,9 @@ }; audmux@021d8000 { + compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; reg = <0x021d8000 0x4000>; + status = "disabled"; }; mipi@021dc000 { /* MIPI-CSI */ @@ -543,28 +696,28 @@ interrupts = <0 18 0x04>; }; - uart2: uart@021e8000 { + uart2: serial@021e8000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021e8000 0x4000>; interrupts = <0 27 0x04>; status = "disabled"; }; - uart3: uart@021ec000 { + uart3: serial@021ec000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021ec000 0x4000>; interrupts = <0 28 0x04>; status = "disabled"; }; - uart4: uart@021f0000 { + uart4: serial@021f0000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f0000 0x4000>; interrupts = <0 29 0x04>; status = "disabled"; }; - uart5: uart@021f4000 { + uart5: serial@021f4000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; interrupts = <0 30 0x04>; diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra-cardhu.dts index 4a166357172b..36321bceec46 100644 --- a/arch/arm/boot/dts/tegra-cardhu.dts +++ b/arch/arm/boot/dts/tegra-cardhu.dts @@ -7,10 +7,10 @@ compatible = "nvidia,cardhu", "nvidia,tegra30"; memory { - reg = < 0x80000000 0x40000000 >; + reg = <0x80000000 0x40000000>; }; - pinmux@70000000 { + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -64,42 +64,40 @@ }; serial@70006000 { - clock-frequency = < 408000000 >; - }; - - serial@70006040 { - status = "disable"; - }; - - serial@70006200 { - status = "disable"; - }; - - serial@70006300 { - status = "disable"; - }; - - serial@70006400 { - status = "disable"; + status = "okay"; + clock-frequency = <408000000>; }; i2c@7000c000 { + status = "okay"; clock-frequency = <100000>; }; i2c@7000c400 { + status = "okay"; clock-frequency = <100000>; }; i2c@7000c500 { + status = "okay"; clock-frequency = <100000>; + + /* ALS and Proximity sensor */ + isl29028@44 { + compatible = "isil,isl29028"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <88 0x04>; /*gpio PL0 */ + }; }; i2c@7000c700 { + status = "okay"; clock-frequency = <100000>; }; i2c@7000d000 { + status = "okay"; clock-frequency = <100000>; wm8903: wm8903@1a { @@ -115,46 +113,41 @@ micdet-delay = <100>; gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; }; + + tps62361 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + }; + }; + + ahub { + i2s@70080400 { + status = "okay"; + }; }; sdhci@78000000 { + status = "okay"; cd-gpios = <&gpio 69 0>; /* gpio PI5 */ wp-gpios = <&gpio 155 0>; /* gpio PT3 */ power-gpios = <&gpio 31 0>; /* gpio PD7 */ bus-width = <4>; }; - sdhci@78000200 { - status = "disable"; - }; - - sdhci@78000400 { - status = "disable"; - }; - - sdhci@78000400 { + sdhci@78000600 { + status = "okay"; support-8bit; bus-width = <8>; }; - ahub@70080000 { - i2s@70080300 { - status = "disable"; - }; - - i2s@70080500 { - status = "disable"; - }; - - i2s@70080600 { - status = "disable"; - }; - - i2s@70080700 { - status = "disable"; - }; - }; - sound { compatible = "nvidia,tegra-audio-wm8903-cardhu", "nvidia,tegra-audio-wm8903"; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 7cd513ac5ea6..7de701365fce 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -6,11 +6,11 @@ model = "NVIDIA Tegra2 Harmony evaluation board"; compatible = "nvidia,harmony", "nvidia,tegra20"; - memory@0 { - reg = < 0x00000000 0x40000000 >; + memory { + reg = <0x00000000 0x40000000>; }; - pinmux@70000000 { + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -234,42 +234,81 @@ }; }; - pmc@7000f400 { - nvidia,invert-interrupt; + i2s@70002800 { + status = "okay"; + }; + + serial@70006300 { + status = "okay"; + clock-frequency = <216000000>; }; i2c@7000c000 { + status = "okay"; clock-frequency = <400000>; wm8903: wm8903@1a { compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = < 187 0x04 >; + interrupts = <187 0x04>; gpio-controller; #gpio-cells = <2>; micdet-cfg = <0>; micdet-delay = <100>; - gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >; + gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; }; }; i2c@7000c400 { + status = "okay"; clock-frequency = <400000>; }; i2c@7000c500 { + status = "okay"; clock-frequency = <400000>; }; i2c@7000d000 { + status = "okay"; clock-frequency = <400000>; }; - i2s@70002a00 { - status = "disable"; + pmc { + nvidia,invert-interrupt; + }; + + usb@c5000000 { + status = "okay"; + }; + + usb@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + }; + + usb@c5008000 { + status = "okay"; + }; + + sdhci@c8000200 { + status = "okay"; + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + support-8bit; + bus-width = <8>; }; sound { @@ -295,51 +334,4 @@ nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ }; - - serial@70006000 { - status = "disable"; - }; - - serial@70006040 { - status = "disable"; - }; - - serial@70006200 { - status = "disable"; - }; - - serial@70006300 { - clock-frequency = < 216000000 >; - }; - - serial@70006400 { - status = "disable"; - }; - - sdhci@c8000000 { - status = "disable"; - }; - - sdhci@c8000200 { - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 155 0>; /* gpio PT3 */ - bus-width = <4>; - }; - - sdhci@c8000400 { - status = "disable"; - }; - - sdhci@c8000600 { - cd-gpios = <&gpio 58 0>; /* gpio PH2 */ - wp-gpios = <&gpio 59 0>; /* gpio PH3 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ - support-8bit; - bus-width = <8>; - }; - - usb@c5004000 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ - }; }; diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index 8d625e4c5de5..bfeb117d5aea 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -6,11 +6,11 @@ model = "Toshiba AC100 / Dynabook AZ"; compatible = "compal,paz00", "nvidia,tegra20"; - memory@0 { + memory { reg = <0x00000000 0x20000000>; }; - pinmux@70000000 { + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -226,7 +226,22 @@ }; }; + i2s@70002800 { + status = "okay"; + }; + + serial@70006000 { + status = "okay"; + clock-frequency = <216000000>; + }; + + serial@70006200 { + status = "okay"; + clock-frequency = <216000000>; + }; + i2c@7000c000 { + status = "okay"; clock-frequency = <400000>; alc5632: alc5632@1e { @@ -238,25 +253,23 @@ }; i2c@7000c400 { + status = "okay"; clock-frequency = <400000>; }; - i2c@7000c500 { - status = "disable"; - }; - - nvec@7000c500 { + nvec { + compatible = "nvidia,nvec"; + reg = <0x7000c500 0x100>; + interrupts = <0 92 0x04>; #address-cells = <1>; #size-cells = <0>; - compatible = "nvidia,nvec"; - reg = <0x7000C500 0x100>; - interrupts = <0 92 0x04>; clock-frequency = <80000>; - request-gpios = <&gpio 170 0>; + request-gpios = <&gpio 170 0>; /* gpio PV2 */ slave-addr = <138>; }; i2c@7000d000 { + status = "okay"; clock-frequency = <400000>; adt7461@4c { @@ -265,8 +278,52 @@ }; }; - i2s@70002a00 { - status = "disable"; + usb@c5000000 { + status = "okay"; + }; + + usb@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ + }; + + usb@c5008000 { + status = "okay"; + }; + + sdhci@c8000000 { + status = "okay"; + cd-gpios = <&gpio 173 0>; /* gpio PV5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 169 0>; /* gpio PV1 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + support-8bit; + bus-width = <8>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 79 1>; /* gpio PJ7, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + wifi { + label = "wifi-led"; + gpios = <&gpio 24 0>; /* gpio PD0 */ + linux,default-trigger = "rfkill0"; + }; }; sound { @@ -288,69 +345,4 @@ nvidia,i2s-controller = <&tegra_i2s1>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ }; - - serial@70006000 { - clock-frequency = <216000000>; - }; - - serial@70006040 { - status = "disable"; - }; - - serial@70006200 { - clock-frequency = <216000000>; - }; - - serial@70006300 { - status = "disable"; - }; - - serial@70006400 { - status = "disable"; - }; - - sdhci@c8000000 { - cd-gpios = <&gpio 173 0>; /* gpio PV5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 169 0>; /* gpio PV1 */ - bus-width = <4>; - }; - - sdhci@c8000200 { - status = "disable"; - }; - - sdhci@c8000400 { - status = "disable"; - }; - - sdhci@c8000600 { - support-8bit; - bus-width = <8>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - power { - label = "Power"; - gpios = <&gpio 79 1>; /* gpio PJ7, active low */ - linux,code = <116>; /* KEY_POWER */ - gpio-key,wakeup; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - wifi { - label = "wifi-led"; - gpios = <&gpio 24 0>; - linux,default-trigger = "rfkill0"; - }; - }; - - usb@c5004000 { - nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ - }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 315971993cfd..89cb7f2acd92 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -7,11 +7,10 @@ compatible = "nvidia,seaboard", "nvidia,tegra20"; memory { - device_type = "memory"; - reg = < 0x00000000 0x40000000 >; + reg = <0x00000000 0x40000000>; }; - pinmux@70000000 { + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -100,7 +99,7 @@ }; hdint { nvidia,pins = "hdint", "lpw0", "lpw2", "lsc1", - "lsck", "lsda", "pta"; + "lsck", "lsda"; nvidia,function = "hdmi"; }; i2cp { @@ -134,6 +133,10 @@ nvidia,pins = "pmc"; nvidia,function = "pwr_on"; }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; rm { nvidia,pins = "rm"; nvidia,function = "i2c1"; @@ -254,43 +257,168 @@ }; }; + i2s@70002800 { + status = "okay"; + }; + + serial@70006300 { + status = "okay"; + clock-frequency = <216000000>; + }; + i2c@7000c000 { + status = "okay"; clock-frequency = <400000>; wm8903: wm8903@1a { compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = < 187 0x04 >; + interrupts = <187 0x04>; gpio-controller; #gpio-cells = <2>; micdet-cfg = <0>; micdet-delay = <100>; - gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >; + gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; + }; + + /* ALS and proximity sensor */ + isl29018@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <202 0x04>; /* GPIO PZ2 */ + }; + + gyrometer@68 { + compatible = "invn,mpu3050"; + reg = <0x68>; + interrupt-parent = <&gpio>; + interrupts = <204 0x04>; /* gpio PZ4 */ }; }; i2c@7000c400 { - clock-frequency = <400000>; + status = "okay"; + clock-frequency = <100000>; + + smart-battery@b { + compatible = "ti,bq20z75", "smart-battery-1.1"; + reg = <0xb>; + ti,i2c-retry-count = <2>; + ti,poll-retry-count = <10>; + }; }; i2c@7000c500 { + status = "okay"; clock-frequency = <400000>; }; i2c@7000d000 { + status = "okay"; clock-frequency = <400000>; - adt7461@4c { - compatible = "adt7461"; + temperature-sensor@4c { + compatible = "nct1008"; reg = <0x4c>; }; + + magnetometer@c { + compatible = "ak8975"; + reg = <0xc>; + interrupt-parent = <&gpio>; + interrupts = <109 0x04>; /* gpio PN5 */ + }; }; - i2s@70002a00 { - status = "disable"; + emc { + emc-table@190000 { + reg = <190000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <190000>; + nvidia,emc-registers = <0x0000000c 0x00000026 + 0x00000009 0x00000003 0x00000004 0x00000004 + 0x00000002 0x0000000c 0x00000003 0x00000003 + 0x00000002 0x00000001 0x00000004 0x00000005 + 0x00000004 0x00000009 0x0000000d 0x0000059f + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000003 0x00000001 0x0000000b 0x000000c8 + 0x00000003 0x00000007 0x00000004 0x0000000f + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0xa06204ae + 0x007dc010 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + emc-table@380000 { + reg = <380000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <380000>; + nvidia,emc-registers = <0x00000017 0x0000004b + 0x00000012 0x00000006 0x00000004 0x00000005 + 0x00000003 0x0000000c 0x00000006 0x00000006 + 0x00000003 0x00000001 0x00000004 0x00000005 + 0x00000004 0x00000009 0x0000000d 0x00000b5f + 0x00000000 0x00000003 0x00000003 0x00000006 + 0x00000006 0x00000001 0x00000011 0x000000c8 + 0x00000003 0x0000000e 0x00000007 0x0000000f + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0xe044048b + 0x007d8010 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + }; + + usb@c5000000 { + status = "okay"; + nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */ + dr_mode = "otg"; + }; + + usb@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + }; + + usb@c5008000 { + status = "okay"; + }; + + sdhci@c8000400 { + status = "okay"; + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + support-8bit; + bus-width = <8>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 170 1>; /* gpio PV2, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + + lid { + label = "Lid"; + gpios = <&gpio 23 0>; /* gpio PC7 */ + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; }; sound { @@ -314,111 +442,4 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */ }; - - serial@70006000 { - status = "disable"; - }; - - serial@70006040 { - status = "disable"; - }; - - serial@70006200 { - status = "disable"; - }; - - serial@70006300 { - clock-frequency = < 216000000 >; - }; - - serial@70006400 { - status = "disable"; - }; - - sdhci@c8000000 { - status = "disable"; - }; - - sdhci@c8000200 { - status = "disable"; - }; - - sdhci@c8000400 { - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ - bus-width = <4>; - }; - - sdhci@c8000600 { - support-8bit; - bus-width = <8>; - }; - - usb@c5000000 { - nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */ - dr_mode = "otg"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - power { - label = "Power"; - gpios = <&gpio 170 1>; /* gpio PV2, active low */ - linux,code = <116>; /* KEY_POWER */ - gpio-key,wakeup; - }; - - lid { - label = "Lid"; - gpios = <&gpio 23 0>; /* gpio PC7 */ - linux,input-type = <5>; /* EV_SW */ - linux,code = <0>; /* SW_LID */ - debounce-interval = <1>; - gpio-key,wakeup; - }; - }; - - emc@7000f400 { - emc-table@190000 { - reg = < 190000 >; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 190000 >; - nvidia,emc-registers = < 0x0000000c 0x00000026 - 0x00000009 0x00000003 0x00000004 0x00000004 - 0x00000002 0x0000000c 0x00000003 0x00000003 - 0x00000002 0x00000001 0x00000004 0x00000005 - 0x00000004 0x00000009 0x0000000d 0x0000059f - 0x00000000 0x00000003 0x00000003 0x00000003 - 0x00000003 0x00000001 0x0000000b 0x000000c8 - 0x00000003 0x00000007 0x00000004 0x0000000f - 0x00000002 0x00000000 0x00000000 0x00000002 - 0x00000000 0x00000000 0x00000083 0xa06204ae - 0x007dc010 0x00000000 0x00000000 0x00000000 - 0x00000000 0x00000000 0x00000000 0x00000000 >; - }; - - emc-table@380000 { - reg = < 380000 >; - compatible = "nvidia,tegra20-emc-table"; - clock-frequency = < 380000 >; - nvidia,emc-registers = < 0x00000017 0x0000004b - 0x00000012 0x00000006 0x00000004 0x00000005 - 0x00000003 0x0000000c 0x00000006 0x00000006 - 0x00000003 0x00000001 0x00000004 0x00000005 - 0x00000004 0x00000009 0x0000000d 0x00000b5f - 0x00000000 0x00000003 0x00000003 0x00000006 - 0x00000006 0x00000001 0x00000011 0x000000c8 - 0x00000003 0x0000000e 0x00000007 0x0000000f - 0x00000002 0x00000000 0x00000000 0x00000002 - 0x00000000 0x00000000 0x00000083 0xe044048b - 0x007d8010 0x00000000 0x00000000 0x00000000 - 0x00000000 0x00000000 0x00000000 0x00000000 >; - }; - }; - - usb@c5004000 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ - }; }; diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra-trimslice.dts index e4fcf9a8178a..9de5636023f6 100644 --- a/arch/arm/boot/dts/tegra-trimslice.dts +++ b/arch/arm/boot/dts/tegra-trimslice.dts @@ -6,11 +6,11 @@ model = "Compulab TrimSlice board"; compatible = "compulab,trimslice", "nvidia,tegra20"; - memory@0 { - reg = < 0x00000000 0x40000000 >; + memory { + reg = <0x00000000 0x40000000>; }; - pinmux@70000000 { + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -240,72 +240,67 @@ }; }; + i2s@70002800 { + status = "okay"; + }; + + serial@70006000 { + status = "okay"; + clock-frequency = <216000000>; + }; + i2c@7000c000 { + status = "okay"; clock-frequency = <400000>; }; i2c@7000c400 { + status = "okay"; clock-frequency = <400000>; }; i2c@7000c500 { + status = "okay"; clock-frequency = <400000>; + + codec: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + }; + + rtc@56 { + compatible = "emmicro,em3027"; + reg = <0x56>; + }; }; - i2c@7000d000 { - status = "disable"; - }; - - i2s@70002800 { - status = "disable"; - }; - - i2s@70002a00 { - status = "disable"; - }; - - das@70000c00 { - status = "disable"; - }; - - serial@70006000 { - clock-frequency = < 216000000 >; - }; - - serial@70006040 { - status = "disable"; - }; - - serial@70006200 { - status = "disable"; - }; - - serial@70006300 { - status = "disable"; - }; - - serial@70006400 { - status = "disable"; - }; - - sdhci@c8000000 { - status = "disable"; - }; - - sdhci@c8000200 { - status = "disable"; - }; - - sdhci@c8000400 { - status = "disable"; - }; - - sdhci@c8000600 { - cd-gpios = <&gpio 121 0>; - wp-gpios = <&gpio 122 0>; + usb@c5000000 { + status = "okay"; }; usb@c5004000 { nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */ }; + + usb@c5008000 { + status = "okay"; + }; + + sdhci@c8000000 { + status = "okay"; + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + cd-gpios = <&gpio 121 0>; /* gpio PP1 */ + wp-gpios = <&gpio 122 0>; /* gpio PP2 */ + bus-width = <4>; + }; + + sound { + compatible = "nvidia,tegra-audio-trimslice"; + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&codec>; + }; }; diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts index b922a26747e7..445343b0fbdd 100644 --- a/arch/arm/boot/dts/tegra-ventana.dts +++ b/arch/arm/boot/dts/tegra-ventana.dts @@ -7,10 +7,10 @@ compatible = "nvidia,ventana", "nvidia,tegra20"; memory { - reg = < 0x00000000 0x40000000 >; + reg = <0x00000000 0x40000000>; }; - pinmux@70000000 { + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -240,38 +240,82 @@ }; }; + i2s@70002800 { + status = "okay"; + }; + + serial@70006300 { + status = "okay"; + clock-frequency = <216000000>; + }; + i2c@7000c000 { + status = "okay"; clock-frequency = <400000>; wm8903: wm8903@1a { compatible = "wlf,wm8903"; reg = <0x1a>; interrupt-parent = <&gpio>; - interrupts = < 187 0x04 >; + interrupts = <187 0x04>; gpio-controller; #gpio-cells = <2>; micdet-cfg = <0>; micdet-delay = <100>; - gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >; + gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; + }; + + /* ALS and proximity sensor */ + isl29018@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <202 0x04>; /*gpio PZ2 */ }; }; i2c@7000c400 { + status = "okay"; clock-frequency = <400000>; }; i2c@7000c500 { + status = "okay"; clock-frequency = <400000>; }; i2c@7000d000 { + status = "okay"; clock-frequency = <400000>; }; - i2s@70002a00 { - status = "disable"; + usb@c5000000 { + status = "okay"; + }; + + usb@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + }; + + usb@c5008000 { + status = "okay"; + }; + + sdhci@c8000400 { + status = "okay"; + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + support-8bit; + bus-width = <8>; }; sound { @@ -294,51 +338,7 @@ nvidia,spkr-en-gpios = <&wm8903 2 0>; nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ - nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */ + nvidia,int-mic-en-gpios = <&gpio 184 0>; /* gpio PX0 */ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */ }; - - serial@70006000 { - status = "disable"; - }; - - serial@70006040 { - status = "disable"; - }; - - serial@70006200 { - status = "disable"; - }; - - serial@70006300 { - clock-frequency = < 216000000 >; - }; - - serial@70006400 { - status = "disable"; - }; - - sdhci@c8000000 { - status = "disable"; - }; - - sdhci@c8000200 { - status = "disable"; - }; - - sdhci@c8000400 { - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ - bus-width = <4>; - }; - - sdhci@c8000600 { - support-8bit; - bus-width = <8>; - }; - - usb@c5004000 { - nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ - }; }; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 108e894a8926..c417d67e9027 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -4,17 +4,237 @@ compatible = "nvidia,tegra20"; interrupt-parent = <&intc>; - pmc@7000f400 { + intc: interrupt-controller { + compatible = "arm,cortex-a9-gic"; + reg = <0x50041000 0x1000 + 0x50040100 0x0100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + apbdma: dma { + compatible = "nvidia,tegra20-apbdma"; + reg = <0x6000a000 0x1200>; + interrupts = <0 104 0x04 + 0 105 0x04 + 0 106 0x04 + 0 107 0x04 + 0 108 0x04 + 0 109 0x04 + 0 110 0x04 + 0 111 0x04 + 0 112 0x04 + 0 113 0x04 + 0 114 0x04 + 0 115 0x04 + 0 116 0x04 + 0 117 0x04 + 0 118 0x04 + 0 119 0x04>; + }; + + ahb { + compatible = "nvidia,tegra20-ahb"; + reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */ + }; + + gpio: gpio { + compatible = "nvidia,tegra20-gpio"; + reg = <0x6000d000 0x1000>; + interrupts = <0 32 0x04 + 0 33 0x04 + 0 34 0x04 + 0 35 0x04 + 0 55 0x04 + 0 87 0x04 + 0 89 0x04>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + pinmux: pinmux { + compatible = "nvidia,tegra20-pinmux"; + reg = <0x70000014 0x10 /* Tri-state registers */ + 0x70000080 0x20 /* Mux registers */ + 0x700000a0 0x14 /* Pull-up/down registers */ + 0x70000868 0xa8>; /* Pad control registers */ + }; + + das { + compatible = "nvidia,tegra20-das"; + reg = <0x70000c00 0x80>; + }; + + tegra_i2s1: i2s@70002800 { + compatible = "nvidia,tegra20-i2s"; + reg = <0x70002800 0x200>; + interrupts = <0 13 0x04>; + nvidia,dma-request-selector = <&apbdma 2>; + status = "disable"; + }; + + tegra_i2s2: i2s@70002a00 { + compatible = "nvidia,tegra20-i2s"; + reg = <0x70002a00 0x200>; + interrupts = <0 3 0x04>; + nvidia,dma-request-selector = <&apbdma 1>; + status = "disable"; + }; + + serial@70006000 { + compatible = "nvidia,tegra20-uart"; + reg = <0x70006000 0x40>; + reg-shift = <2>; + interrupts = <0 36 0x04>; + status = "disable"; + }; + + serial@70006040 { + compatible = "nvidia,tegra20-uart"; + reg = <0x70006040 0x40>; + reg-shift = <2>; + interrupts = <0 37 0x04>; + status = "disable"; + }; + + serial@70006200 { + compatible = "nvidia,tegra20-uart"; + reg = <0x70006200 0x100>; + reg-shift = <2>; + interrupts = <0 46 0x04>; + status = "disable"; + }; + + serial@70006300 { + compatible = "nvidia,tegra20-uart"; + reg = <0x70006300 0x100>; + reg-shift = <2>; + interrupts = <0 90 0x04>; + status = "disable"; + }; + + serial@70006400 { + compatible = "nvidia,tegra20-uart"; + reg = <0x70006400 0x100>; + reg-shift = <2>; + interrupts = <0 91 0x04>; + status = "disable"; + }; + + i2c@7000c000 { + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <0 38 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; + }; + + i2c@7000c400 { + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000c400 0x100>; + interrupts = <0 84 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; + }; + + i2c@7000c500 { + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000c500 0x100>; + interrupts = <0 92 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; + }; + + i2c@7000d000 { + compatible = "nvidia,tegra20-i2c-dvc"; + reg = <0x7000d000 0x200>; + interrupts = <0 53 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; + }; + + pmc { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; }; - intc: interrupt-controller@50041000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = < 0x50041000 0x1000 >, - < 0x50040100 0x0100 >; + mc { + compatible = "nvidia,tegra20-mc"; + reg = <0x7000f000 0x024 + 0x7000f03c 0x3c4>; + interrupts = <0 77 0x04>; + }; + + gart { + compatible = "nvidia,tegra20-gart"; + reg = <0x7000f024 0x00000018 /* controller registers */ + 0x58000000 0x02000000>; /* GART aperture */ + }; + + emc { + compatible = "nvidia,tegra20-emc"; + reg = <0x7000f400 0x200>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usb@c5000000 { + compatible = "nvidia,tegra20-ehci", "usb-ehci"; + reg = <0xc5000000 0x4000>; + interrupts = <0 20 0x04>; + phy_type = "utmi"; + nvidia,has-legacy-mode; + status = "disable"; + }; + + usb@c5004000 { + compatible = "nvidia,tegra20-ehci", "usb-ehci"; + reg = <0xc5004000 0x4000>; + interrupts = <0 21 0x04>; + phy_type = "ulpi"; + status = "disable"; + }; + + usb@c5008000 { + compatible = "nvidia,tegra20-ehci", "usb-ehci"; + reg = <0xc5008000 0x4000>; + interrupts = <0 97 0x04>; + phy_type = "utmi"; + status = "disable"; + }; + + sdhci@c8000000 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000000 0x200>; + interrupts = <0 14 0x04>; + status = "disable"; + }; + + sdhci@c8000200 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000200 0x200>; + interrupts = <0 15 0x04>; + status = "disable"; + }; + + sdhci@c8000400 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000400 0x200>; + interrupts = <0 19 0x04>; + status = "disable"; + }; + + sdhci@c8000600 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000600 0x200>; + interrupts = <0 31 0x04>; + status = "disable"; }; pmu { @@ -22,189 +242,4 @@ interrupts = <0 56 0x04 0 57 0x04>; }; - - apbdma: dma@6000a000 { - compatible = "nvidia,tegra20-apbdma"; - reg = <0x6000a000 0x1200>; - interrupts = < 0 104 0x04 - 0 105 0x04 - 0 106 0x04 - 0 107 0x04 - 0 108 0x04 - 0 109 0x04 - 0 110 0x04 - 0 111 0x04 - 0 112 0x04 - 0 113 0x04 - 0 114 0x04 - 0 115 0x04 - 0 116 0x04 - 0 117 0x04 - 0 118 0x04 - 0 119 0x04 >; - }; - - i2c@7000c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra20-i2c"; - reg = <0x7000C000 0x100>; - interrupts = < 0 38 0x04 >; - }; - - i2c@7000c400 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra20-i2c"; - reg = <0x7000C400 0x100>; - interrupts = < 0 84 0x04 >; - }; - - i2c@7000c500 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra20-i2c"; - reg = <0x7000C500 0x100>; - interrupts = < 0 92 0x04 >; - }; - - i2c@7000d000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra20-i2c-dvc"; - reg = <0x7000D000 0x200>; - interrupts = < 0 53 0x04 >; - }; - - tegra_i2s1: i2s@70002800 { - compatible = "nvidia,tegra20-i2s"; - reg = <0x70002800 0x200>; - interrupts = < 0 13 0x04 >; - nvidia,dma-request-selector = < &apbdma 2 >; - }; - - tegra_i2s2: i2s@70002a00 { - compatible = "nvidia,tegra20-i2s"; - reg = <0x70002a00 0x200>; - interrupts = < 0 3 0x04 >; - nvidia,dma-request-selector = < &apbdma 1 >; - }; - - das@70000c00 { - compatible = "nvidia,tegra20-das"; - reg = <0x70000c00 0x80>; - }; - - gpio: gpio@6000d000 { - compatible = "nvidia,tegra20-gpio"; - reg = < 0x6000d000 0x1000 >; - interrupts = < 0 32 0x04 - 0 33 0x04 - 0 34 0x04 - 0 35 0x04 - 0 55 0x04 - 0 87 0x04 - 0 89 0x04 >; - #gpio-cells = <2>; - gpio-controller; - #interrupt-cells = <2>; - interrupt-controller; - }; - - pinmux: pinmux@70000000 { - compatible = "nvidia,tegra20-pinmux"; - reg = < 0x70000014 0x10 /* Tri-state registers */ - 0x70000080 0x20 /* Mux registers */ - 0x700000a0 0x14 /* Pull-up/down registers */ - 0x70000868 0xa8 >; /* Pad control registers */ - }; - - serial@70006000 { - compatible = "nvidia,tegra20-uart"; - reg = <0x70006000 0x40>; - reg-shift = <2>; - interrupts = < 0 36 0x04 >; - }; - - serial@70006040 { - compatible = "nvidia,tegra20-uart"; - reg = <0x70006040 0x40>; - reg-shift = <2>; - interrupts = < 0 37 0x04 >; - }; - - serial@70006200 { - compatible = "nvidia,tegra20-uart"; - reg = <0x70006200 0x100>; - reg-shift = <2>; - interrupts = < 0 46 0x04 >; - }; - - serial@70006300 { - compatible = "nvidia,tegra20-uart"; - reg = <0x70006300 0x100>; - reg-shift = <2>; - interrupts = < 0 90 0x04 >; - }; - - serial@70006400 { - compatible = "nvidia,tegra20-uart"; - reg = <0x70006400 0x100>; - reg-shift = <2>; - interrupts = < 0 91 0x04 >; - }; - - emc@7000f400 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra20-emc"; - reg = <0x7000f400 0x200>; - }; - - sdhci@c8000000 { - compatible = "nvidia,tegra20-sdhci"; - reg = <0xc8000000 0x200>; - interrupts = < 0 14 0x04 >; - }; - - sdhci@c8000200 { - compatible = "nvidia,tegra20-sdhci"; - reg = <0xc8000200 0x200>; - interrupts = < 0 15 0x04 >; - }; - - sdhci@c8000400 { - compatible = "nvidia,tegra20-sdhci"; - reg = <0xc8000400 0x200>; - interrupts = < 0 19 0x04 >; - }; - - sdhci@c8000600 { - compatible = "nvidia,tegra20-sdhci"; - reg = <0xc8000600 0x200>; - interrupts = < 0 31 0x04 >; - }; - - usb@c5000000 { - compatible = "nvidia,tegra20-ehci", "usb-ehci"; - reg = <0xc5000000 0x4000>; - interrupts = < 0 20 0x04 >; - phy_type = "utmi"; - nvidia,has-legacy-mode; - }; - - usb@c5004000 { - compatible = "nvidia,tegra20-ehci", "usb-ehci"; - reg = <0xc5004000 0x4000>; - interrupts = < 0 21 0x04 >; - phy_type = "ulpi"; - }; - - usb@c5008000 { - compatible = "nvidia,tegra20-ehci", "usb-ehci"; - reg = <0xc5008000 0x4000>; - interrupts = < 0 97 0x04 >; - phy_type = "utmi"; - }; }; - diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 15200a949a81..2dcc09e784b5 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -4,190 +4,193 @@ compatible = "nvidia,tegra30"; interrupt-parent = <&intc>; - pmc@7000f400 { - compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc"; - reg = <0x7000e400 0x400>; - }; - - intc: interrupt-controller@50041000 { + intc: interrupt-controller { compatible = "arm,cortex-a9-gic"; + reg = <0x50041000 0x1000 + 0x50040100 0x0100>; interrupt-controller; #interrupt-cells = <3>; - reg = < 0x50041000 0x1000 >, - < 0x50040100 0x0100 >; }; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <0 144 0x04 - 0 145 0x04 - 0 146 0x04 - 0 147 0x04>; - }; - - apbdma: dma@6000a000 { + apbdma: dma { compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1400>; - interrupts = < 0 104 0x04 - 0 105 0x04 - 0 106 0x04 - 0 107 0x04 - 0 108 0x04 - 0 109 0x04 - 0 110 0x04 - 0 111 0x04 - 0 112 0x04 - 0 113 0x04 - 0 114 0x04 - 0 115 0x04 - 0 116 0x04 - 0 117 0x04 - 0 118 0x04 - 0 119 0x04 - 0 128 0x04 - 0 129 0x04 - 0 130 0x04 - 0 131 0x04 - 0 132 0x04 - 0 133 0x04 - 0 134 0x04 - 0 135 0x04 - 0 136 0x04 - 0 137 0x04 - 0 138 0x04 - 0 139 0x04 - 0 140 0x04 - 0 141 0x04 - 0 142 0x04 - 0 143 0x04 >; + interrupts = <0 104 0x04 + 0 105 0x04 + 0 106 0x04 + 0 107 0x04 + 0 108 0x04 + 0 109 0x04 + 0 110 0x04 + 0 111 0x04 + 0 112 0x04 + 0 113 0x04 + 0 114 0x04 + 0 115 0x04 + 0 116 0x04 + 0 117 0x04 + 0 118 0x04 + 0 119 0x04 + 0 128 0x04 + 0 129 0x04 + 0 130 0x04 + 0 131 0x04 + 0 132 0x04 + 0 133 0x04 + 0 134 0x04 + 0 135 0x04 + 0 136 0x04 + 0 137 0x04 + 0 138 0x04 + 0 139 0x04 + 0 140 0x04 + 0 141 0x04 + 0 142 0x04 + 0 143 0x04>; }; - i2c@7000c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000C000 0x100>; - interrupts = < 0 38 0x04 >; + ahb: ahb { + compatible = "nvidia,tegra30-ahb"; + reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */ }; - i2c@7000c400 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000C400 0x100>; - interrupts = < 0 84 0x04 >; - }; - - i2c@7000c500 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000C500 0x100>; - interrupts = < 0 92 0x04 >; - }; - - i2c@7000c700 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000c700 0x100>; - interrupts = < 0 120 0x04 >; - }; - - i2c@7000d000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000D000 0x100>; - interrupts = < 0 53 0x04 >; - }; - - gpio: gpio@6000d000 { + gpio: gpio { compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio"; - reg = < 0x6000d000 0x1000 >; - interrupts = < 0 32 0x04 - 0 33 0x04 - 0 34 0x04 - 0 35 0x04 - 0 55 0x04 - 0 87 0x04 - 0 89 0x04 - 0 125 0x04 >; + reg = <0x6000d000 0x1000>; + interrupts = <0 32 0x04 + 0 33 0x04 + 0 34 0x04 + 0 35 0x04 + 0 55 0x04 + 0 87 0x04 + 0 89 0x04 + 0 125 0x04>; #gpio-cells = <2>; gpio-controller; #interrupt-cells = <2>; interrupt-controller; }; + pinmux: pinmux { + compatible = "nvidia,tegra30-pinmux"; + reg = <0x70000868 0xd0 /* Pad control registers */ + 0x70003000 0x3e0>; /* Mux registers */ + }; + serial@70006000 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006000 0x40>; reg-shift = <2>; - interrupts = < 0 36 0x04 >; + interrupts = <0 36 0x04>; + status = "disable"; }; serial@70006040 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006040 0x40>; reg-shift = <2>; - interrupts = < 0 37 0x04 >; + interrupts = <0 37 0x04>; + status = "disable"; }; serial@70006200 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006200 0x100>; reg-shift = <2>; - interrupts = < 0 46 0x04 >; + interrupts = <0 46 0x04>; + status = "disable"; }; serial@70006300 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006300 0x100>; reg-shift = <2>; - interrupts = < 0 90 0x04 >; + interrupts = <0 90 0x04>; + status = "disable"; }; serial@70006400 { compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart"; reg = <0x70006400 0x100>; reg-shift = <2>; - interrupts = < 0 91 0x04 >; + interrupts = <0 91 0x04>; + status = "disable"; }; - sdhci@78000000 { - compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; - reg = <0x78000000 0x200>; - interrupts = < 0 14 0x04 >; + i2c@7000c000 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <0 38 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; }; - sdhci@78000200 { - compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; - reg = <0x78000200 0x200>; - interrupts = < 0 15 0x04 >; + i2c@7000c400 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c400 0x100>; + interrupts = <0 84 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; }; - sdhci@78000400 { - compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; - reg = <0x78000400 0x200>; - interrupts = < 0 19 0x04 >; + i2c@7000c500 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c500 0x100>; + interrupts = <0 92 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; }; - sdhci@78000600 { - compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; - reg = <0x78000600 0x200>; - interrupts = < 0 31 0x04 >; + i2c@7000c700 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c700 0x100>; + interrupts = <0 120 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; }; - pinmux: pinmux@70000000 { - compatible = "nvidia,tegra30-pinmux"; - reg = < 0x70000868 0xd0 /* Pad control registers */ - 0x70003000 0x3e0 >; /* Mux registers */ + i2c@7000d000 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000d000 0x100>; + interrupts = <0 53 0x04>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; + }; + + pmc { + compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc"; + reg = <0x7000e400 0x400>; + }; + + mc { + compatible = "nvidia,tegra30-mc"; + reg = <0x7000f000 0x010 + 0x7000f03c 0x1b4 + 0x7000f200 0x028 + 0x7000f284 0x17c>; + interrupts = <0 77 0x04>; + }; + + smmu { + compatible = "nvidia,tegra30-smmu"; + reg = <0x7000f010 0x02c + 0x7000f1f0 0x010 + 0x7000f228 0x05c>; + nvidia,#asids = <4>; /* # of ASIDs */ + dma-window = <0 0x40000000>; /* IOVA start & length */ + nvidia,ahb = <&ahb>; }; ahub { compatible = "nvidia,tegra30-ahub"; - reg = <0x70080000 0x200 0x70080200 0x100>; - interrupts = < 0 103 0x04 >; + reg = <0x70080000 0x200 + 0x70080200 0x100>; + interrupts = <0 103 0x04>; nvidia,dma-request-selector = <&apbdma 1>; ranges; @@ -198,30 +201,71 @@ compatible = "nvidia,tegra30-i2s"; reg = <0x70080300 0x100>; nvidia,ahub-cif-ids = <4 4>; + status = "disable"; }; tegra_i2s1: i2s@70080400 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080400 0x100>; nvidia,ahub-cif-ids = <5 5>; + status = "disable"; }; tegra_i2s2: i2s@70080500 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080500 0x100>; nvidia,ahub-cif-ids = <6 6>; + status = "disable"; }; tegra_i2s3: i2s@70080600 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080600 0x100>; nvidia,ahub-cif-ids = <7 7>; + status = "disable"; }; tegra_i2s4: i2s@70080700 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080700 0x100>; nvidia,ahub-cif-ids = <8 8>; + status = "disable"; }; }; + + sdhci@78000000 { + compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; + reg = <0x78000000 0x200>; + interrupts = <0 14 0x04>; + status = "disable"; + }; + + sdhci@78000200 { + compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; + reg = <0x78000200 0x200>; + interrupts = <0 15 0x04>; + status = "disable"; + }; + + sdhci@78000400 { + compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; + reg = <0x78000400 0x200>; + interrupts = <0 19 0x04>; + status = "disable"; + }; + + sdhci@78000600 { + compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; + reg = <0x78000600 0x200>; + interrupts = <0 31 0x04>; + status = "disable"; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <0 144 0x04 + 0 145 0x04 + 0 146 0x04 + 0 147 0x04>; + }; }; diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 1ebbf451c48d..5406c23a02e3 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -22,6 +22,7 @@ CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_MXS=y +CONFIG_MACH_MXS_DT=y CONFIG_MACH_MX23EVK=y CONFIG_MACH_MX28EVK=y CONFIG_MACH_STMP378X_DEVB=y diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 3851d8a27875..05541cf4a878 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -42,4 +42,5 @@ dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \ imx53-qsb.dtb imx53-smd.dtb dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ - imx6q-sabrelite.dtb + imx6q-sabrelite.dtb \ + imx6q-sabresd.dtb \ diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index b8a382defb23..fcd94f3b0f0e 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -31,6 +31,11 @@ static const char *per_lp_apm_sel[] = { "main_bus", "lp_apm", }; static const char *per_root_sel[] = { "per_podf", "ipg", }; static const char *esdhc_c_sel[] = { "esdhc_a_podf", "esdhc_b_podf", }; static const char *esdhc_d_sel[] = { "esdhc_a_podf", "esdhc_b_podf", }; +static const char *ssi_apm_sels[] = { "ckih1", "lp_amp", "ckih2", }; +static const char *ssi_clk_sels[] = { "pll1_sw", "pll2_sw", "pll3_sw", "ssi_apm", }; +static const char *ssi3_clk_sels[] = { "ssi1_root_gate", "ssi2_root_gate", }; +static const char *ssi_ext1_com_sels[] = { "ssi_ext1_podf", "ssi1_root_gate", }; +static const char *ssi_ext2_com_sels[] = { "ssi_ext2_podf", "ssi2_root_gate", }; static const char *emi_slow_sel[] = { "main_bus", "ahb", }; static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", }; static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", }; @@ -71,6 +76,11 @@ enum imx5_clks { pll3_sw, ipu_di0_sel, ipu_di1_sel, tve_ext_sel, mx51_mipi, pll4_sw, ldb_di1_sel, di_pll4_podf, ldb_di0_sel, ldb_di0_gate, usb_phy1_gate, usb_phy2_gate, per_lp_apm, per_pred1, per_pred2, per_podf, per_root, + ssi_apm, ssi1_root_sel, ssi2_root_sel, ssi3_root_sel, ssi_ext1_sel, + ssi_ext2_sel, ssi_ext1_com_sel, ssi_ext2_com_sel, ssi1_root_pred, + ssi1_root_podf, ssi2_root_pred, ssi2_root_podf, ssi_ext1_pred, + ssi_ext1_podf, ssi_ext2_pred, ssi_ext2_podf, ssi1_root_gate, + ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate, clk_max }; @@ -195,6 +205,28 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[uart5_per_gate] = imx_clk_gate2("uart5_per_gate", "uart_root", MXC_CCM_CCGR7, 14); clk[gpc_dvfs] = imx_clk_gate2("gpc_dvfs", "dummy", MXC_CCM_CCGR5, 24); + clk[ssi_apm] = imx_clk_mux("ssi_apm", MXC_CCM_CSCMR1, 8, 2, ssi_apm_sels, ARRAY_SIZE(ssi_apm_sels)); + clk[ssi1_root_sel] = imx_clk_mux("ssi1_root_sel", MXC_CCM_CSCMR1, 14, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels)); + clk[ssi2_root_sel] = imx_clk_mux("ssi2_root_sel", MXC_CCM_CSCMR1, 12, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels)); + clk[ssi3_root_sel] = imx_clk_mux("ssi3_root_sel", MXC_CCM_CSCMR1, 11, 1, ssi3_clk_sels, ARRAY_SIZE(ssi3_clk_sels)); + clk[ssi_ext1_sel] = imx_clk_mux("ssi_ext1_sel", MXC_CCM_CSCMR1, 28, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels)); + clk[ssi_ext2_sel] = imx_clk_mux("ssi_ext2_sel", MXC_CCM_CSCMR1, 30, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels)); + clk[ssi_ext1_com_sel] = imx_clk_mux("ssi_ext1_com_sel", MXC_CCM_CSCMR1, 0, 1, ssi_ext1_com_sels, ARRAY_SIZE(ssi_ext1_com_sels)); + clk[ssi_ext2_com_sel] = imx_clk_mux("ssi_ext2_com_sel", MXC_CCM_CSCMR1, 1, 1, ssi_ext2_com_sels, ARRAY_SIZE(ssi_ext2_com_sels)); + clk[ssi1_root_pred] = imx_clk_divider("ssi1_root_pred", "ssi1_root_sel", MXC_CCM_CS1CDR, 6, 3); + clk[ssi1_root_podf] = imx_clk_divider("ssi1_root_podf", "ssi1_root_pred", MXC_CCM_CS1CDR, 0, 6); + clk[ssi2_root_pred] = imx_clk_divider("ssi2_root_pred", "ssi2_root_sel", MXC_CCM_CS2CDR, 6, 3); + clk[ssi2_root_podf] = imx_clk_divider("ssi2_root_podf", "ssi2_root_pred", MXC_CCM_CS2CDR, 0, 6); + clk[ssi_ext1_pred] = imx_clk_divider("ssi_ext1_pred", "ssi_ext1_sel", MXC_CCM_CS1CDR, 22, 3); + clk[ssi_ext1_podf] = imx_clk_divider("ssi_ext1_podf", "ssi_ext1_pred", MXC_CCM_CS1CDR, 16, 6); + clk[ssi_ext2_pred] = imx_clk_divider("ssi_ext2_pred", "ssi_ext2_sel", MXC_CCM_CS2CDR, 22, 3); + clk[ssi_ext2_podf] = imx_clk_divider("ssi_ext2_podf", "ssi_ext2_pred", MXC_CCM_CS2CDR, 16, 6); + clk[ssi1_root_gate] = imx_clk_gate2("ssi1_root_gate", "ssi1_root_podf", MXC_CCM_CCGR3, 18); + clk[ssi2_root_gate] = imx_clk_gate2("ssi2_root_gate", "ssi2_root_podf", MXC_CCM_CCGR3, 22); + clk[ssi3_root_gate] = imx_clk_gate2("ssi3_root_gate", "ssi3_root_sel", MXC_CCM_CCGR3, 26); + clk[ssi_ext1_gate] = imx_clk_gate2("ssi_ext1_gate", "ssi_ext1_com_sel", MXC_CCM_CCGR3, 28); + clk[ssi_ext2_gate] = imx_clk_gate2("ssi_ext2_gate", "ssi_ext2_com_sel", MXC_CCM_CCGR3, 30); + for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) pr_err("i.MX5 clk %d: register failed with %ld\n", @@ -237,6 +269,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2"); + clk_register_clkdev(clk[ssi_ext1_gate], "ssi_ext1", NULL); + clk_register_clkdev(clk[ssi_ext2_gate], "ssi_ext2", NULL); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); clk_register_clkdev(clk[cpu_podf], "cpu", NULL); clk_register_clkdev(clk[iim_gate], "iim", NULL); @@ -320,6 +354,9 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx51.3"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.3"); clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx51.3"); + clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "83fcc000.ssi"); + clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "70014000.ssi"); + clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "83fe8000.ssi"); /* set the usboh3 parent to pll2_sw */ clk_set_parent(clk[usboh3_sel], clk[pll2_sw]); @@ -406,6 +443,9 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx53.3"); clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.3"); clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx53.3"); + clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi"); + clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi"); + clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi"); /* set SDHC root clock to 200MHZ*/ clk_set_rate(clk[esdhc_a_podf], 200000000); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index f40a35da2e5c..cab02d0a15d6 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -155,7 +155,8 @@ enum mx6q_clks { gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1, ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, - pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, clk_max + pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, + ssi2_ipg, ssi3_ipg, clk_max }; static struct clk *clk[clk_max]; @@ -367,9 +368,9 @@ int __init mx6q_clocks_init(void) clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4); clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); - clk[ssi1] = imx_clk_gate2("ssi1", "ssi1_podf", base + 0x7c, 18); - clk[ssi2] = imx_clk_gate2("ssi2", "ssi2_podf", base + 0x7c, 20); - clk[ssi3] = imx_clk_gate2("ssi3", "ssi3_podf", base + 0x7c, 22); + clk[ssi1_ipg] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18); + clk[ssi2_ipg] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20); + clk[ssi3_ipg] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22); clk[uart_ipg] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24); clk[uart_serial] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26); clk[usboh3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); @@ -392,17 +393,17 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); clk_register_clkdev(clk[twd], NULL, "smp_twd"); clk_register_clkdev(clk[usboh3], NULL, "usboh3"); - clk_register_clkdev(clk[uart_serial], "per", "2020000.uart"); - clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.uart"); - clk_register_clkdev(clk[uart_serial], "per", "21e8000.uart"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.uart"); - clk_register_clkdev(clk[uart_serial], "per", "21ec000.uart"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.uart"); - clk_register_clkdev(clk[uart_serial], "per", "21f0000.uart"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.uart"); - clk_register_clkdev(clk[uart_serial], "per", "21f4000.uart"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.uart"); - clk_register_clkdev(clk[enet], NULL, "2188000.enet"); + clk_register_clkdev(clk[uart_serial], "per", "2020000.serial"); + clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial"); + clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial"); + clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial"); + clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial"); + clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial"); + clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial"); + clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial"); + clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial"); + clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial"); + clk_register_clkdev(clk[enet], NULL, "2188000.ethernet"); clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc"); clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc"); clk_register_clkdev(clk[usdhc3], NULL, "2198000.usdhc"); @@ -418,6 +419,10 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[sdma], NULL, "20ec000.sdma"); clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog"); clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog"); + clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi"); + clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL); + clk_register_clkdev(clk[ahb], "ahb", NULL); + clk_register_clkdev(clk[cko1], "cko1", NULL); for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) { c = clk_get_sys(clks_init_on[i], NULL); diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index 574eca4b89a5..eb04b6248e48 100644 --- a/arch/arm/mach-imx/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c @@ -10,6 +10,9 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include +#include +#include #include #include #include @@ -81,6 +84,19 @@ static const struct of_device_id imx53_iomuxc_of_match[] __initconst = { { /* sentinel */ } }; +static void __init imx53_qsb_init(void) +{ + struct clk *clk; + + clk = clk_get_sys(NULL, "ssi_ext1"); + if (IS_ERR(clk)) { + pr_err("failed to get clk ssi_ext1\n"); + return; + } + + clk_register_clkdev(clk, NULL, "0-000a"); +} + static void __init imx53_dt_init(void) { struct device_node *node; @@ -99,6 +115,9 @@ static void __init imx53_dt_init(void) of_node_put(node); } + if (of_machine_is_compatible("fsl,imx53-qsb")) + imx53_qsb_init(); + of_platform_populate(NULL, of_default_bus_match_table, imx53_auxdata_lookup, NULL); } diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c index 0213f8dcee81..c40a34c00489 100644 --- a/arch/arm/mach-imx/lluart.c +++ b/arch/arm/mach-imx/lluart.c @@ -17,6 +17,12 @@ #include static struct map_desc imx_lluart_desc = { +#ifdef CONFIG_DEBUG_IMX6Q_UART2 + .virtual = MX6Q_IO_P2V(MX6Q_UART2_BASE_ADDR), + .pfn = __phys_to_pfn(MX6Q_UART2_BASE_ADDR), + .length = MX6Q_UART2_SIZE, + .type = MT_DEVICE, +#endif #ifdef CONFIG_DEBUG_IMX6Q_UART4 .virtual = MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR), .pfn = __phys_to_pfn(MX6Q_UART4_BASE_ADDR), diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 3df360a52c17..b47e98b7d539 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -10,6 +10,8 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include +#include #include #include #include @@ -64,18 +66,53 @@ soft: /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { - /* min rx data delay */ - phy_write(phydev, 0x0b, 0x8105); - phy_write(phydev, 0x0c, 0x0000); + if (IS_ENABLED(CONFIG_PHYLIB)) { + /* min rx data delay */ + phy_write(phydev, 0x0b, 0x8105); + phy_write(phydev, 0x0c, 0x0000); - /* max rx/tx clock delay, min rx/tx control delay */ - phy_write(phydev, 0x0b, 0x8104); - phy_write(phydev, 0x0c, 0xf0f0); - phy_write(phydev, 0x0b, 0x104); + /* max rx/tx clock delay, min rx/tx control delay */ + phy_write(phydev, 0x0b, 0x8104); + phy_write(phydev, 0x0c, 0xf0f0); + phy_write(phydev, 0x0b, 0x104); + } return 0; } +static void __init imx6q_sabrelite_cko1_setup(void) +{ + struct clk *cko1_sel, *ahb, *cko1; + unsigned long rate; + + cko1_sel = clk_get_sys(NULL, "cko1_sel"); + ahb = clk_get_sys(NULL, "ahb"); + cko1 = clk_get_sys(NULL, "cko1"); + if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) { + pr_err("cko1 setup failed!\n"); + goto put_clk; + } + clk_set_parent(cko1_sel, ahb); + rate = clk_round_rate(cko1, 16000000); + clk_set_rate(cko1, rate); + clk_register_clkdev(cko1, NULL, "0-000a"); +put_clk: + if (!IS_ERR(cko1_sel)) + clk_put(cko1_sel); + if (!IS_ERR(ahb)) + clk_put(ahb); + if (!IS_ERR(cko1)) + clk_put(cko1); +} + +static void __init imx6q_sabrelite_init(void) +{ + if (IS_ENABLED(CONFIG_PHYLIB)) + phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, + ksz9021rn_phy_fixup); + imx6q_sabrelite_cko1_setup(); +} + static void __init imx6q_init_machine(void) { /* @@ -85,8 +122,7 @@ static void __init imx6q_init_machine(void) pinctrl_provide_dummies(); if (of_machine_is_compatible("fsl,imx6q-sabrelite")) - phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, - ksz9021rn_phy_fixup); + imx6q_sabrelite_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -139,6 +175,7 @@ static struct sys_timer imx6q_timer = { static const char *imx6q_dt_compat[] __initdata = { "fsl,imx6q-arm2", "fsl,imx6q-sabrelite", + "fsl,imx6q-sabresd", "fsl,imx6q", NULL, }; diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index e4b822e9f719..517672ebcbc5 100644 --- a/arch/arm/mach-imx/mach-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c @@ -163,6 +163,12 @@ static iomux_v3_cfg_t mx51babbage_pads[] = { MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, MX51_PAD_CSPI1_SS0__GPIO4_24, MX51_PAD_CSPI1_SS1__GPIO4_25, + + /* Audio */ + MX51_PAD_AUD3_BB_TXD__AUD3_TXD, + MX51_PAD_AUD3_BB_RXD__AUD3_RXD, + MX51_PAD_AUD3_BB_CK__AUD3_TXC, + MX51_PAD_AUD3_BB_FS__AUD3_TXFS, }; /* Serial ports */ diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 07d5383d68ee..91cf0625819c 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -7,18 +7,28 @@ config MXS_OCOTP config SOC_IMX23 bool + select ARM_AMBA select CPU_ARM926T select HAVE_PWM select PINCTRL_IMX23 config SOC_IMX28 bool + select ARM_AMBA select CPU_ARM926T select HAVE_PWM select PINCTRL_IMX28 comment "MXS platforms:" +config MACH_MXS_DT + bool "Support MXS platforms from device tree" + select SOC_IMX23 + select SOC_IMX28 + help + Include support for Freescale MXS platforms(i.MX23 and i.MX28) + using the device tree for discovery + config MACH_STMP378X_DEVB bool "Support STMP378x_devb Platform" select SOC_IMX23 diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 6ce21a26412e..e41590ccb437 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -4,6 +4,7 @@ obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig index b8913df4cfa2..19659de1c4e8 100644 --- a/arch/arm/mach-mxs/devices/Kconfig +++ b/arch/arm/mach-mxs/devices/Kconfig @@ -1,6 +1,5 @@ config MXS_HAVE_AMBA_DUART bool - select ARM_AMBA config MXS_HAVE_PLATFORM_AUART bool diff --git a/arch/arm/mach-mxs/devices/platform-dma.c b/arch/arm/mach-mxs/devices/platform-dma.c index 6a0202b1016c..46824501de00 100644 --- a/arch/arm/mach-mxs/devices/platform-dma.c +++ b/arch/arm/mach-mxs/devices/platform-dma.c @@ -14,7 +14,7 @@ #include #include -static struct platform_device *__init mxs_add_dma(const char *devid, +struct platform_device *__init mxs_add_dma(const char *devid, resource_size_t base) { struct resource res[] = { @@ -29,22 +29,3 @@ static struct platform_device *__init mxs_add_dma(const char *devid, res, ARRAY_SIZE(res), NULL, 0, DMA_BIT_MASK(32)); } - -static int __init mxs_add_mxs_dma(void) -{ - char *apbh = "mxs-dma-apbh"; - char *apbx = "mxs-dma-apbx"; - - if (cpu_is_mx23()) { - mxs_add_dma(apbh, MX23_APBH_DMA_BASE_ADDR); - mxs_add_dma(apbx, MX23_APBX_DMA_BASE_ADDR); - } - - if (cpu_is_mx28()) { - mxs_add_dma(apbh, MX28_APBH_DMA_BASE_ADDR); - mxs_add_dma(apbx, MX28_APBX_DMA_BASE_ADDR); - } - - return 0; -} -arch_initcall(mxs_add_mxs_dma); diff --git a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c index ed0885e414e0..cd99f19ec637 100644 --- a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c +++ b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c @@ -14,7 +14,7 @@ #include struct platform_device *__init mxs_add_gpio( - int id, resource_size_t iobase, int irq) + char *name, int id, resource_size_t iobase, int irq) { struct resource res[] = { { @@ -29,25 +29,5 @@ struct platform_device *__init mxs_add_gpio( }; return platform_device_register_resndata(&mxs_apbh_bus, - "gpio-mxs", id, res, ARRAY_SIZE(res), NULL, 0); + name, id, res, ARRAY_SIZE(res), NULL, 0); } - -static int __init mxs_add_mxs_gpio(void) -{ - if (cpu_is_mx23()) { - mxs_add_gpio(0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0); - mxs_add_gpio(1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1); - mxs_add_gpio(2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2); - } - - if (cpu_is_mx28()) { - mxs_add_gpio(0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0); - mxs_add_gpio(1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1); - mxs_add_gpio(2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2); - mxs_add_gpio(3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3); - mxs_add_gpio(4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4); - } - - return 0; -} -postcore_initcall(mxs_add_mxs_gpio); diff --git a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c index bef9d923f54e..b33c9d05c552 100644 --- a/arch/arm/mach-mxs/devices/platform-mxs-mmc.c +++ b/arch/arm/mach-mxs/devices/platform-mxs-mmc.c @@ -17,8 +17,9 @@ #include #include -#define mxs_mxs_mmc_data_entry_single(soc, _id, hwid) \ +#define mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid) \ { \ + .devid = _devid, \ .id = _id, \ .iobase = soc ## _SSP ## hwid ## _BASE_ADDR, \ .dma = soc ## _DMA_SSP ## hwid, \ @@ -26,23 +27,23 @@ .irq_dma = soc ## _INT_SSP ## hwid ## _DMA, \ } -#define mxs_mxs_mmc_data_entry(soc, _id, hwid) \ - [_id] = mxs_mxs_mmc_data_entry_single(soc, _id, hwid) +#define mxs_mxs_mmc_data_entry(soc, _devid, _id, hwid) \ + [_id] = mxs_mxs_mmc_data_entry_single(soc, _devid, _id, hwid) #ifdef CONFIG_SOC_IMX23 const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst = { - mxs_mxs_mmc_data_entry(MX23, 0, 1), - mxs_mxs_mmc_data_entry(MX23, 1, 2), + mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 0, 1), + mxs_mxs_mmc_data_entry(MX23, "imx23-mmc", 1, 2), }; #endif #ifdef CONFIG_SOC_IMX28 const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst = { - mxs_mxs_mmc_data_entry(MX28, 0, 0), - mxs_mxs_mmc_data_entry(MX28, 1, 1), - mxs_mxs_mmc_data_entry(MX28, 2, 2), - mxs_mxs_mmc_data_entry(MX28, 3, 3), + mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 0, 0), + mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 1, 1), + mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 2, 2), + mxs_mxs_mmc_data_entry(MX28, "imx28-mmc", 3, 3), }; #endif @@ -70,6 +71,6 @@ struct platform_device *__init mxs_add_mxs_mmc( }, }; - return mxs_add_platform_device("mxs-mmc", data->id, + return mxs_add_platform_device(data->devid, data->id, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h index 84af61cf6a62..de6c7ba42544 100644 --- a/arch/arm/mach-mxs/include/mach/common.h +++ b/arch/arm/mach-mxs/include/mach/common.h @@ -18,17 +18,20 @@ extern void mxs_restart(char, const char *); extern int mxs_saif_clkmux_select(unsigned int clkmux); extern void mx23_soc_init(void); -extern int mx23_register_gpios(void); extern int mx23_clocks_init(void); extern void mx23_map_io(void); extern void mx23_init_irq(void); extern void mx28_soc_init(void); -extern int mx28_register_gpios(void); extern int mx28_clocks_init(void); extern void mx28_map_io(void); extern void mx28_init_irq(void); extern void icoll_init_irq(void); +extern struct platform_device *mxs_add_dma(const char *devid, + resource_size_t base); +extern struct platform_device *mxs_add_gpio(char *name, int id, + resource_size_t iobase, int irq); + #endif /* __MACH_MXS_COMMON_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 21e45a70d344..e8b1d958240b 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -82,8 +82,9 @@ struct platform_device * __init mxs_add_mxs_i2c( const struct mxs_mxs_i2c_data *data); /* mmc */ -#include +#include struct mxs_mxs_mmc_data { + const char *devid; int id; resource_size_t iobase; resource_size_t dma; diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c new file mode 100644 index 000000000000..8cac94b33020 --- /dev/null +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -0,0 +1,121 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int __init mxs_icoll_add_irq_domain(struct device_node *np, + struct device_node *interrupt_parent) +{ + irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL); + + return 0; +} + +static int __init mxs_gpio_add_irq_domain(struct device_node *np, + struct device_node *interrupt_parent) +{ + static int gpio_irq_base = MXS_GPIO_IRQ_START; + + irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL); + gpio_irq_base += 32; + + return 0; +} + +static const struct of_device_id mxs_irq_match[] __initconst = { + { .compatible = "fsl,mxs-icoll", .data = mxs_icoll_add_irq_domain, }, + { .compatible = "fsl,mxs-gpio", .data = mxs_gpio_add_irq_domain, }, + { /* sentinel */ } +}; + +static void __init mxs_dt_init_irq(void) +{ + icoll_init_irq(); + of_irq_init(mxs_irq_match); +} + +static void __init imx23_timer_init(void) +{ + mx23_clocks_init(); +} + +static struct sys_timer imx23_timer = { + .init = imx23_timer_init, +}; + +static void __init imx28_timer_init(void) +{ + mx28_clocks_init(); +} + +static struct sys_timer imx28_timer = { + .init = imx28_timer_init, +}; + +static void __init imx28_evk_init(void) +{ + struct clk *clk; + + /* Enable fec phy clock */ + clk = clk_get_sys("enet_out", NULL); + if (!IS_ERR(clk)) + clk_prepare_enable(clk); +} + +static void __init mxs_machine_init(void) +{ + if (of_machine_is_compatible("fsl,imx28-evk")) + imx28_evk_init(); + + of_platform_populate(NULL, of_default_bus_match_table, + NULL, NULL); +} + +static const char *imx23_dt_compat[] __initdata = { + "fsl,imx23-evk", + "fsl,imx23", + NULL, +}; + +static const char *imx28_dt_compat[] __initdata = { + "fsl,imx28-evk", + "fsl,imx28", + NULL, +}; + +DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)") + .map_io = mx23_map_io, + .init_irq = mxs_dt_init_irq, + .timer = &imx23_timer, + .init_machine = mxs_machine_init, + .dt_compat = imx23_dt_compat, + .restart = mxs_restart, +MACHINE_END + +DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)") + .map_io = mx28_map_io, + .init_irq = mxs_dt_init_irq, + .timer = &imx28_timer, + .init_machine = mxs_machine_init, + .dt_compat = imx28_dt_compat, + .restart = mxs_restart, +MACHINE_END diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c index 67a384edcf5b..dccb67a9e7c4 100644 --- a/arch/arm/mach-mxs/mm.c +++ b/arch/arm/mach-mxs/mm.c @@ -66,9 +66,25 @@ void __init mx28_init_irq(void) void __init mx23_soc_init(void) { pinctrl_provide_dummies(); + + mxs_add_dma("imx23-dma-apbh", MX23_APBH_DMA_BASE_ADDR); + mxs_add_dma("imx23-dma-apbx", MX23_APBX_DMA_BASE_ADDR); + + mxs_add_gpio("imx23-gpio", 0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0); + mxs_add_gpio("imx23-gpio", 1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1); + mxs_add_gpio("imx23-gpio", 2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2); } void __init mx28_soc_init(void) { pinctrl_provide_dummies(); + + mxs_add_dma("imx28-dma-apbh", MX23_APBH_DMA_BASE_ADDR); + mxs_add_dma("imx28-dma-apbx", MX23_APBX_DMA_BASE_ADDR); + + mxs_add_gpio("imx28-gpio", 0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0); + mxs_add_gpio("imx28-gpio", 1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1); + mxs_add_gpio("imx28-gpio", 2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2); + mxs_add_gpio("imx28-gpio", 3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3); + mxs_add_gpio("imx28-gpio", 4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4); } diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 8ddda365f1a0..761e45f9456f 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -24,6 +24,8 @@ #define UART_PADDR MX51_UART1_BASE_ADDR #elif defined (CONFIG_DEBUG_IMX50_IMX53_UART) #define UART_PADDR MX53_UART1_BASE_ADDR +#elif defined (CONFIG_DEBUG_IMX6Q_UART2) +#define UART_PADDR MX6Q_UART2_BASE_ADDR #elif defined (CONFIG_DEBUG_IMX6Q_UART4) #define UART_PADDR MX6Q_UART4_BASE_ADDR #endif diff --git a/arch/arm/plat-mxc/include/mach/mx6q.h b/arch/arm/plat-mxc/include/mach/mx6q.h index 254a561a2799..f7e7dbac8f4b 100644 --- a/arch/arm/plat-mxc/include/mach/mx6q.h +++ b/arch/arm/plat-mxc/include/mach/mx6q.h @@ -27,6 +27,8 @@ #define MX6Q_CCM_SIZE 0x4000 #define MX6Q_ANATOP_BASE_ADDR 0x020c8000 #define MX6Q_ANATOP_SIZE 0x1000 +#define MX6Q_UART2_BASE_ADDR 0x021e8000 +#define MX6Q_UART2_SIZE 0x4000 #define MX6Q_UART4_BASE_ADDR 0x021f0000 #define MX6Q_UART4_SIZE 0x4000 diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c index dcae11285716..f7be225f544c 100644 --- a/drivers/clk/mxs/clk-imx23.c +++ b/drivers/clk/mxs/clk-imx23.c @@ -81,19 +81,20 @@ static struct clk_lookup uart_lookups[] __initdata = { }; static struct clk_lookup hbus_lookups[] __initdata = { - { .dev_id = "mxs-dma-apbh", }, + { .dev_id = "imx23-dma-apbh", }, { .dev_id = "80004000.dma-apbh", }, }; static struct clk_lookup xbus_lookups[] __initdata = { { .dev_id = "duart", .con_id = "apb_pclk"}, - { .dev_id = "mxs-dma-apbx", }, + { .dev_id = "80070000.serial", .con_id = "apb_pclk"}, + { .dev_id = "imx23-dma-apbx", }, { .dev_id = "80024000.dma-apbx", }, }; static struct clk_lookup ssp_lookups[] __initdata = { - { .dev_id = "mxs-mmc.0", }, - { .dev_id = "mxs-mmc.1", }, + { .dev_id = "imx23-mmc.0", }, + { .dev_id = "imx23-mmc.1", }, { .dev_id = "80010000.ssp", }, { .dev_id = "80034000.ssp", }, }; diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c index b2a3257d4f66..2826a2606a29 100644 --- a/drivers/clk/mxs/clk-imx28.c +++ b/drivers/clk/mxs/clk-imx28.c @@ -136,33 +136,34 @@ static struct clk_lookup uart_lookups[] __initdata = { }; static struct clk_lookup hbus_lookups[] __initdata = { - { .dev_id = "mxs-dma-apbh", }, + { .dev_id = "imx28-dma-apbh", }, { .dev_id = "80004000.dma-apbh", }, }; static struct clk_lookup xbus_lookups[] __initdata = { { .dev_id = "duart", .con_id = "apb_pclk"}, - { .dev_id = "mxs-dma-apbx", }, + { .dev_id = "80074000.serial", .con_id = "apb_pclk"}, + { .dev_id = "imx28-dma-apbx", }, { .dev_id = "80024000.dma-apbx", }, }; static struct clk_lookup ssp0_lookups[] __initdata = { - { .dev_id = "mxs-mmc.0", }, + { .dev_id = "imx28-mmc.0", }, { .dev_id = "80010000.ssp", }, }; static struct clk_lookup ssp1_lookups[] __initdata = { - { .dev_id = "mxs-mmc.1", }, + { .dev_id = "imx28-mmc.1", }, { .dev_id = "80012000.ssp", }, }; static struct clk_lookup ssp2_lookups[] __initdata = { - { .dev_id = "mxs-mmc.2", }, + { .dev_id = "imx28-mmc.2", }, { .dev_id = "80014000.ssp", }, }; static struct clk_lookup ssp3_lookups[] __initdata = { - { .dev_id = "mxs-mmc.3", }, + { .dev_id = "imx28-mmc.3", }, { .dev_id = "80016000.ssp", }, }; diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index ef378b5b17e4..aadeb5be9dba 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -238,6 +238,7 @@ config IMX_DMA config MXS_DMA bool "MXS DMA support" depends on SOC_IMX23 || SOC_IMX28 + select STMP_DEVICE select DMA_ENGINE help Support the MXS DMA engine. This engine including APBH-DMA diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index 3db3a48d3f01..c96ab15319f2 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -22,11 +22,14 @@ #include #include #include +#include #include +#include +#include +#include #include #include -#include #include "dmaengine.h" @@ -36,12 +39,8 @@ * dma can program the controller registers of peripheral devices. */ -#define MXS_DMA_APBH 0 -#define MXS_DMA_APBX 1 -#define dma_is_apbh() (mxs_dma->dev_id == MXS_DMA_APBH) - -#define APBH_VERSION_LATEST 3 -#define apbh_is_old() (mxs_dma->version < APBH_VERSION_LATEST) +#define dma_is_apbh(mxs_dma) ((mxs_dma)->type == MXS_DMA_APBH) +#define apbh_is_old(mxs_dma) ((mxs_dma)->dev_id == IMX23_DMA) #define HW_APBHX_CTRL0 0x000 #define BM_APBH_CTRL0_APB_BURST8_EN (1 << 29) @@ -51,13 +50,14 @@ #define HW_APBHX_CTRL2 0x020 #define HW_APBHX_CHANNEL_CTRL 0x030 #define BP_APBHX_CHANNEL_CTRL_RESET_CHANNEL 16 -#define HW_APBH_VERSION (cpu_is_mx23() ? 0x3f0 : 0x800) -#define HW_APBX_VERSION 0x800 -#define BP_APBHX_VERSION_MAJOR 24 -#define HW_APBHX_CHn_NXTCMDAR(n) \ - (((dma_is_apbh() && apbh_is_old()) ? 0x050 : 0x110) + (n) * 0x70) -#define HW_APBHX_CHn_SEMA(n) \ - (((dma_is_apbh() && apbh_is_old()) ? 0x080 : 0x140) + (n) * 0x70) +/* + * The offset of NXTCMDAR register is different per both dma type and version, + * while stride for each channel is all the same 0x70. + */ +#define HW_APBHX_CHn_NXTCMDAR(d, n) \ + (((dma_is_apbh(d) && apbh_is_old(d)) ? 0x050 : 0x110) + (n) * 0x70) +#define HW_APBHX_CHn_SEMA(d, n) \ + (((dma_is_apbh(d) && apbh_is_old(d)) ? 0x080 : 0x140) + (n) * 0x70) /* * ccw bits definitions @@ -121,9 +121,19 @@ struct mxs_dma_chan { #define MXS_DMA_CHANNELS 16 #define MXS_DMA_CHANNELS_MASK 0xffff +enum mxs_dma_devtype { + MXS_DMA_APBH, + MXS_DMA_APBX, +}; + +enum mxs_dma_id { + IMX23_DMA, + IMX28_DMA, +}; + struct mxs_dma_engine { - int dev_id; - unsigned int version; + enum mxs_dma_id dev_id; + enum mxs_dma_devtype type; void __iomem *base; struct clk *clk; struct dma_device dma_device; @@ -131,17 +141,86 @@ struct mxs_dma_engine { struct mxs_dma_chan mxs_chans[MXS_DMA_CHANNELS]; }; +struct mxs_dma_type { + enum mxs_dma_id id; + enum mxs_dma_devtype type; +}; + +static struct mxs_dma_type mxs_dma_types[] = { + { + .id = IMX23_DMA, + .type = MXS_DMA_APBH, + }, { + .id = IMX23_DMA, + .type = MXS_DMA_APBX, + }, { + .id = IMX28_DMA, + .type = MXS_DMA_APBH, + }, { + .id = IMX28_DMA, + .type = MXS_DMA_APBX, + } +}; + +static struct platform_device_id mxs_dma_ids[] = { + { + .name = "imx23-dma-apbh", + .driver_data = (kernel_ulong_t) &mxs_dma_types[0], + }, { + .name = "imx23-dma-apbx", + .driver_data = (kernel_ulong_t) &mxs_dma_types[1], + }, { + .name = "imx28-dma-apbh", + .driver_data = (kernel_ulong_t) &mxs_dma_types[2], + }, { + .name = "imx28-dma-apbx", + .driver_data = (kernel_ulong_t) &mxs_dma_types[3], + }, { + /* end of list */ + } +}; + +static const struct of_device_id mxs_dma_dt_ids[] = { + { .compatible = "fsl,imx23-dma-apbh", .data = &mxs_dma_ids[0], }, + { .compatible = "fsl,imx23-dma-apbx", .data = &mxs_dma_ids[1], }, + { .compatible = "fsl,imx28-dma-apbh", .data = &mxs_dma_ids[2], }, + { .compatible = "fsl,imx28-dma-apbx", .data = &mxs_dma_ids[3], }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_dma_dt_ids); + +static struct mxs_dma_chan *to_mxs_dma_chan(struct dma_chan *chan) +{ + return container_of(chan, struct mxs_dma_chan, chan); +} + +int mxs_dma_is_apbh(struct dma_chan *chan) +{ + struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan); + struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; + + return dma_is_apbh(mxs_dma); +} + +int mxs_dma_is_apbx(struct dma_chan *chan) +{ + struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan); + struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; + + return !dma_is_apbh(mxs_dma); +} + static void mxs_dma_reset_chan(struct mxs_dma_chan *mxs_chan) { struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; int chan_id = mxs_chan->chan.chan_id; - if (dma_is_apbh() && apbh_is_old()) + if (dma_is_apbh(mxs_dma) && apbh_is_old(mxs_dma)) writel(1 << (chan_id + BP_APBH_CTRL0_RESET_CHANNEL), - mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR); + mxs_dma->base + HW_APBHX_CTRL0 + STMP_OFFSET_REG_SET); else writel(1 << (chan_id + BP_APBHX_CHANNEL_CTRL_RESET_CHANNEL), - mxs_dma->base + HW_APBHX_CHANNEL_CTRL + MXS_SET_ADDR); + mxs_dma->base + HW_APBHX_CHANNEL_CTRL + STMP_OFFSET_REG_SET); } static void mxs_dma_enable_chan(struct mxs_dma_chan *mxs_chan) @@ -151,10 +230,10 @@ static void mxs_dma_enable_chan(struct mxs_dma_chan *mxs_chan) /* set cmd_addr up */ writel(mxs_chan->ccw_phys, - mxs_dma->base + HW_APBHX_CHn_NXTCMDAR(chan_id)); + mxs_dma->base + HW_APBHX_CHn_NXTCMDAR(mxs_dma, chan_id)); /* write 1 to SEMA to kick off the channel */ - writel(1, mxs_dma->base + HW_APBHX_CHn_SEMA(chan_id)); + writel(1, mxs_dma->base + HW_APBHX_CHn_SEMA(mxs_dma, chan_id)); } static void mxs_dma_disable_chan(struct mxs_dma_chan *mxs_chan) @@ -168,12 +247,12 @@ static void mxs_dma_pause_chan(struct mxs_dma_chan *mxs_chan) int chan_id = mxs_chan->chan.chan_id; /* freeze the channel */ - if (dma_is_apbh() && apbh_is_old()) + if (dma_is_apbh(mxs_dma) && apbh_is_old(mxs_dma)) writel(1 << chan_id, - mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR); + mxs_dma->base + HW_APBHX_CTRL0 + STMP_OFFSET_REG_SET); else writel(1 << chan_id, - mxs_dma->base + HW_APBHX_CHANNEL_CTRL + MXS_SET_ADDR); + mxs_dma->base + HW_APBHX_CHANNEL_CTRL + STMP_OFFSET_REG_SET); mxs_chan->status = DMA_PAUSED; } @@ -184,21 +263,16 @@ static void mxs_dma_resume_chan(struct mxs_dma_chan *mxs_chan) int chan_id = mxs_chan->chan.chan_id; /* unfreeze the channel */ - if (dma_is_apbh() && apbh_is_old()) + if (dma_is_apbh(mxs_dma) && apbh_is_old(mxs_dma)) writel(1 << chan_id, - mxs_dma->base + HW_APBHX_CTRL0 + MXS_CLR_ADDR); + mxs_dma->base + HW_APBHX_CTRL0 + STMP_OFFSET_REG_CLR); else writel(1 << chan_id, - mxs_dma->base + HW_APBHX_CHANNEL_CTRL + MXS_CLR_ADDR); + mxs_dma->base + HW_APBHX_CHANNEL_CTRL + STMP_OFFSET_REG_CLR); mxs_chan->status = DMA_IN_PROGRESS; } -static struct mxs_dma_chan *to_mxs_dma_chan(struct dma_chan *chan) -{ - return container_of(chan, struct mxs_dma_chan, chan); -} - static dma_cookie_t mxs_dma_tx_submit(struct dma_async_tx_descriptor *tx) { return dma_cookie_assign(tx); @@ -220,11 +294,11 @@ static irqreturn_t mxs_dma_int_handler(int irq, void *dev_id) /* completion status */ stat1 = readl(mxs_dma->base + HW_APBHX_CTRL1); stat1 &= MXS_DMA_CHANNELS_MASK; - writel(stat1, mxs_dma->base + HW_APBHX_CTRL1 + MXS_CLR_ADDR); + writel(stat1, mxs_dma->base + HW_APBHX_CTRL1 + STMP_OFFSET_REG_CLR); /* error status */ stat2 = readl(mxs_dma->base + HW_APBHX_CTRL2); - writel(stat2, mxs_dma->base + HW_APBHX_CTRL2 + MXS_CLR_ADDR); + writel(stat2, mxs_dma->base + HW_APBHX_CTRL2 + STMP_OFFSET_REG_CLR); /* * When both completion and error of termination bits set at the @@ -567,27 +641,21 @@ static int __init mxs_dma_init(struct mxs_dma_engine *mxs_dma) if (ret) return ret; - ret = mxs_reset_block(mxs_dma->base); + ret = stmp_reset_block(mxs_dma->base); if (ret) goto err_out; - /* only major version matters */ - mxs_dma->version = readl(mxs_dma->base + - ((mxs_dma->dev_id == MXS_DMA_APBX) ? - HW_APBX_VERSION : HW_APBH_VERSION)) >> - BP_APBHX_VERSION_MAJOR; - /* enable apbh burst */ - if (dma_is_apbh()) { + if (dma_is_apbh(mxs_dma)) { writel(BM_APBH_CTRL0_APB_BURST_EN, - mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR); + mxs_dma->base + HW_APBHX_CTRL0 + STMP_OFFSET_REG_SET); writel(BM_APBH_CTRL0_APB_BURST8_EN, - mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR); + mxs_dma->base + HW_APBHX_CTRL0 + STMP_OFFSET_REG_SET); } /* enable irq for all the channels */ writel(MXS_DMA_CHANNELS_MASK << MXS_DMA_CHANNELS, - mxs_dma->base + HW_APBHX_CTRL1 + MXS_SET_ADDR); + mxs_dma->base + HW_APBHX_CTRL1 + STMP_OFFSET_REG_SET); err_out: clk_disable_unprepare(mxs_dma->clk); @@ -596,8 +664,9 @@ err_out: static int __init mxs_dma_probe(struct platform_device *pdev) { - const struct platform_device_id *id_entry = - platform_get_device_id(pdev); + const struct platform_device_id *id_entry; + const struct of_device_id *of_id; + const struct mxs_dma_type *dma_type; struct mxs_dma_engine *mxs_dma; struct resource *iores; int ret, i; @@ -606,7 +675,15 @@ static int __init mxs_dma_probe(struct platform_device *pdev) if (!mxs_dma) return -ENOMEM; - mxs_dma->dev_id = id_entry->driver_data; + of_id = of_match_device(mxs_dma_dt_ids, &pdev->dev); + if (of_id) + id_entry = of_id->data; + else + id_entry = platform_get_device_id(pdev); + + dma_type = (struct mxs_dma_type *)id_entry->driver_data; + mxs_dma->type = dma_type->type; + mxs_dma->dev_id = dma_type->id; iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -689,23 +766,12 @@ err_request_region: return ret; } -static struct platform_device_id mxs_dma_type[] = { - { - .name = "mxs-dma-apbh", - .driver_data = MXS_DMA_APBH, - }, { - .name = "mxs-dma-apbx", - .driver_data = MXS_DMA_APBX, - }, { - /* end of list */ - } -}; - static struct platform_driver mxs_dma_driver = { .driver = { .name = "mxs-dma", + .of_match_table = mxs_dma_dt_ids, }, - .id_table = mxs_dma_type, + .id_table = mxs_dma_ids, }; static int __init mxs_dma_module_init(void) diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c index b4136501abd8..39e495669961 100644 --- a/drivers/gpio/gpio-mxs.c +++ b/drivers/gpio/gpio-mxs.c @@ -25,23 +25,25 @@ #include #include #include +#include +#include +#include #include #include #include #include -#include #define MXS_SET 0x4 #define MXS_CLR 0x8 -#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10) -#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10) -#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10) -#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10) -#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10) -#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10) -#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10) -#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10) +#define PINCTRL_DOUT(p) ((is_imx23_gpio(p) ? 0x0500 : 0x0700) + (p->id) * 0x10) +#define PINCTRL_DIN(p) ((is_imx23_gpio(p) ? 0x0600 : 0x0900) + (p->id) * 0x10) +#define PINCTRL_DOE(p) ((is_imx23_gpio(p) ? 0x0700 : 0x0b00) + (p->id) * 0x10) +#define PINCTRL_PIN2IRQ(p) ((is_imx23_gpio(p) ? 0x0800 : 0x1000) + (p->id) * 0x10) +#define PINCTRL_IRQEN(p) ((is_imx23_gpio(p) ? 0x0900 : 0x1100) + (p->id) * 0x10) +#define PINCTRL_IRQLEV(p) ((is_imx23_gpio(p) ? 0x0a00 : 0x1200) + (p->id) * 0x10) +#define PINCTRL_IRQPOL(p) ((is_imx23_gpio(p) ? 0x0b00 : 0x1300) + (p->id) * 0x10) +#define PINCTRL_IRQSTAT(p) ((is_imx23_gpio(p) ? 0x0c00 : 0x1400) + (p->id) * 0x10) #define GPIO_INT_FALL_EDGE 0x0 #define GPIO_INT_LOW_LEV 0x1 @@ -52,14 +54,30 @@ #define irq_to_gpio(irq) ((irq) - MXS_GPIO_IRQ_START) +enum mxs_gpio_id { + IMX23_GPIO, + IMX28_GPIO, +}; + struct mxs_gpio_port { void __iomem *base; int id; int irq; int virtual_irq_start; struct bgpio_chip bgc; + enum mxs_gpio_id devid; }; +static inline int is_imx23_gpio(struct mxs_gpio_port *port) +{ + return port->devid == IMX23_GPIO; +} + +static inline int is_imx28_gpio(struct mxs_gpio_port *port) +{ + return port->devid == IMX28_GPIO; +} + /* Note: This driver assumes 32 GPIOs are handled in one register */ static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) @@ -89,21 +107,21 @@ static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) } /* set level or edge */ - pin_addr = port->base + PINCTRL_IRQLEV(port->id); + pin_addr = port->base + PINCTRL_IRQLEV(port); if (edge & GPIO_INT_LEV_MASK) writel(pin_mask, pin_addr + MXS_SET); else writel(pin_mask, pin_addr + MXS_CLR); /* set polarity */ - pin_addr = port->base + PINCTRL_IRQPOL(port->id); + pin_addr = port->base + PINCTRL_IRQPOL(port); if (edge & GPIO_INT_POL_MASK) writel(pin_mask, pin_addr + MXS_SET); else writel(pin_mask, pin_addr + MXS_CLR); writel(1 << (gpio & 0x1f), - port->base + PINCTRL_IRQSTAT(port->id) + MXS_CLR); + port->base + PINCTRL_IRQSTAT(port) + MXS_CLR); return 0; } @@ -117,8 +135,8 @@ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) desc->irq_data.chip->irq_ack(&desc->irq_data); - irq_stat = readl(port->base + PINCTRL_IRQSTAT(port->id)) & - readl(port->base + PINCTRL_IRQEN(port->id)); + irq_stat = readl(port->base + PINCTRL_IRQSTAT(port)) & + readl(port->base + PINCTRL_IRQEN(port)); while (irq_stat != 0) { int irqoffset = fls(irq_stat) - 1; @@ -164,8 +182,8 @@ static void __init mxs_gpio_init_gc(struct mxs_gpio_port *port) ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_set_type = mxs_gpio_set_irq_type; ct->chip.irq_set_wake = mxs_gpio_set_wake_irq; - ct->regs.ack = PINCTRL_IRQSTAT(port->id) + MXS_CLR; - ct->regs.mask = PINCTRL_IRQEN(port->id); + ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR; + ct->regs.mask = PINCTRL_IRQEN(port); irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); } @@ -179,60 +197,83 @@ static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset) return port->virtual_irq_start + offset; } +static struct platform_device_id mxs_gpio_ids[] = { + { + .name = "imx23-gpio", + .driver_data = IMX23_GPIO, + }, { + .name = "imx28-gpio", + .driver_data = IMX28_GPIO, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, mxs_gpio_ids); + +static const struct of_device_id mxs_gpio_dt_ids[] = { + { .compatible = "fsl,imx23-gpio", .data = (void *) IMX23_GPIO, }, + { .compatible = "fsl,imx28-gpio", .data = (void *) IMX28_GPIO, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_gpio_dt_ids); + static int __devinit mxs_gpio_probe(struct platform_device *pdev) { + const struct of_device_id *of_id = + of_match_device(mxs_gpio_dt_ids, &pdev->dev); + struct device_node *np = pdev->dev.of_node; + struct device_node *parent; static void __iomem *base; struct mxs_gpio_port *port; struct resource *iores = NULL; int err; - port = kzalloc(sizeof(struct mxs_gpio_port), GFP_KERNEL); + port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL); if (!port) return -ENOMEM; - port->id = pdev->id; + if (np) { + port->id = of_alias_get_id(np, "gpio"); + if (port->id < 0) + return port->id; + port->devid = (enum mxs_gpio_id) of_id->data; + } else { + port->id = pdev->id; + port->devid = pdev->id_entry->driver_data; + } port->virtual_irq_start = MXS_GPIO_IRQ_START + port->id * 32; + port->irq = platform_get_irq(pdev, 0); + if (port->irq < 0) + return port->irq; + /* * map memory region only once, as all the gpio ports * share the same one */ if (!base) { - iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!iores) { - err = -ENODEV; - goto out_kfree; - } - - if (!request_mem_region(iores->start, resource_size(iores), - pdev->name)) { - err = -EBUSY; - goto out_kfree; - } - - base = ioremap(iores->start, resource_size(iores)); - if (!base) { - err = -ENOMEM; - goto out_release_mem; + if (np) { + parent = of_get_parent(np); + base = of_iomap(parent, 0); + of_node_put(parent); + } else { + iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_request_and_ioremap(&pdev->dev, iores); } + if (!base) + return -EADDRNOTAVAIL; } port->base = base; - port->irq = platform_get_irq(pdev, 0); - if (port->irq < 0) { - err = -EINVAL; - goto out_iounmap; - } - /* * select the pin interrupt functionality but initially * disable the interrupts */ - writel(~0U, port->base + PINCTRL_PIN2IRQ(port->id)); - writel(0, port->base + PINCTRL_IRQEN(port->id)); + writel(~0U, port->base + PINCTRL_PIN2IRQ(port)); + writel(0, port->base + PINCTRL_IRQEN(port)); /* clear address has to be used to clear IRQSTAT bits */ - writel(~0U, port->base + PINCTRL_IRQSTAT(port->id) + MXS_CLR); + writel(~0U, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR); /* gpio-mxs can be a generic irq chip */ mxs_gpio_init_gc(port); @@ -242,41 +283,32 @@ static int __devinit mxs_gpio_probe(struct platform_device *pdev) irq_set_handler_data(port->irq, port); err = bgpio_init(&port->bgc, &pdev->dev, 4, - port->base + PINCTRL_DIN(port->id), - port->base + PINCTRL_DOUT(port->id), NULL, - port->base + PINCTRL_DOE(port->id), NULL, 0); + port->base + PINCTRL_DIN(port), + port->base + PINCTRL_DOUT(port), NULL, + port->base + PINCTRL_DOE(port), NULL, 0); if (err) - goto out_iounmap; + return err; port->bgc.gc.to_irq = mxs_gpio_to_irq; port->bgc.gc.base = port->id * 32; err = gpiochip_add(&port->bgc.gc); - if (err) - goto out_bgpio_remove; + if (err) { + bgpio_remove(&port->bgc); + return err; + } return 0; - -out_bgpio_remove: - bgpio_remove(&port->bgc); -out_iounmap: - if (iores) - iounmap(port->base); -out_release_mem: - if (iores) - release_mem_region(iores->start, resource_size(iores)); -out_kfree: - kfree(port); - dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err); - return err; } static struct platform_driver mxs_gpio_driver = { .driver = { .name = "gpio-mxs", .owner = THIS_MODULE, + .of_match_table = mxs_gpio_dt_ids, }, .probe = mxs_gpio_probe, + .id_table = mxs_gpio_ids, }; static int __init mxs_gpio_init(void) diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 58a338846f06..04eb441b6ce1 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -28,6 +28,9 @@ #include #include #include +#include +#include +#include #define DRIVER_NAME "mxs-i2c" @@ -366,6 +369,7 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) adap->algo = &mxs_i2c_algo; adap->dev.parent = dev; adap->nr = pdev->id; + adap->dev.of_node = pdev->dev.of_node; i2c_set_adapdata(adap, i2c); err = i2c_add_numbered_adapter(adap); if (err) { @@ -375,6 +379,8 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) return err; } + of_i2c_register_devices(adap); + return 0; } @@ -394,10 +400,17 @@ static int __devexit mxs_i2c_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id mxs_i2c_dt_ids[] = { + { .compatible = "fsl,imx28-i2c", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_i2c_dt_ids); + static struct platform_driver mxs_i2c_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, + .of_match_table = mxs_i2c_dt_ids, }, .remove = __devexit_p(mxs_i2c_remove), }; diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index bb03ddda481d..34a90266ab11 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -23,6 +23,9 @@ #include #include #include +#include +#include +#include #include #include #include @@ -40,18 +43,15 @@ #include #include #include - -#include -#include -#include +#include +#include #define DRIVER_NAME "mxs-mmc" /* card detect polling timeout */ #define MXS_MMC_DETECT_TIMEOUT (HZ/2) -#define SSP_VERSION_LATEST 4 -#define ssp_is_old() (host->version < SSP_VERSION_LATEST) +#define ssp_is_old(host) ((host)->devid == IMX23_MMC) /* SSP registers */ #define HW_SSP_CTRL0 0x000 @@ -86,14 +86,14 @@ #define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4) #define BP_SSP_BLOCK_SIZE_BLOCK_SIZE (0) #define BM_SSP_BLOCK_SIZE_BLOCK_SIZE (0xf) -#define HW_SSP_TIMING (ssp_is_old() ? 0x050 : 0x070) +#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070) #define BP_SSP_TIMING_TIMEOUT (16) #define BM_SSP_TIMING_TIMEOUT (0xffff << 16) #define BP_SSP_TIMING_CLOCK_DIVIDE (8) #define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8) #define BP_SSP_TIMING_CLOCK_RATE (0) #define BM_SSP_TIMING_CLOCK_RATE (0xff) -#define HW_SSP_CTRL1 (ssp_is_old() ? 0x060 : 0x080) +#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080) #define BM_SSP_CTRL1_SDIO_IRQ (1 << 31) #define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30) #define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29) @@ -116,15 +116,13 @@ #define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4) #define BP_SSP_CTRL1_SSP_MODE (0) #define BM_SSP_CTRL1_SSP_MODE (0xf) -#define HW_SSP_SDRESP0 (ssp_is_old() ? 0x080 : 0x0a0) -#define HW_SSP_SDRESP1 (ssp_is_old() ? 0x090 : 0x0b0) -#define HW_SSP_SDRESP2 (ssp_is_old() ? 0x0a0 : 0x0c0) -#define HW_SSP_SDRESP3 (ssp_is_old() ? 0x0b0 : 0x0d0) -#define HW_SSP_STATUS (ssp_is_old() ? 0x0c0 : 0x100) +#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0) +#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0) +#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0) +#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0) +#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100) #define BM_SSP_STATUS_CARD_DETECT (1 << 28) #define BM_SSP_STATUS_SDIO_IRQ (1 << 17) -#define HW_SSP_VERSION (cpu_is_mx23() ? 0x110 : 0x130) -#define BP_SSP_VERSION_MAJOR (24) #define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field) @@ -139,6 +137,11 @@ #define SSP_PIO_NUM 3 +enum mxs_mmc_id { + IMX23_MMC, + IMX28_MMC, +}; + struct mxs_mmc_host { struct mmc_host *mmc; struct mmc_request *mrq; @@ -146,9 +149,7 @@ struct mxs_mmc_host { struct mmc_data *data; void __iomem *base; - int irq; - struct resource *res; - struct resource *dma_res; + int dma_channel; struct clk *clk; unsigned int clk_rate; @@ -158,32 +159,28 @@ struct mxs_mmc_host { enum dma_transfer_direction slave_dirn; u32 ssp_pio_words[SSP_PIO_NUM]; - unsigned int version; + enum mxs_mmc_id devid; unsigned char bus_width; spinlock_t lock; int sdio_irq_en; + int wp_gpio; }; static int mxs_mmc_get_ro(struct mmc_host *mmc) { struct mxs_mmc_host *host = mmc_priv(mmc); - struct mxs_mmc_platform_data *pdata = - mmc_dev(host->mmc)->platform_data; - if (!pdata) - return -EFAULT; - - if (!gpio_is_valid(pdata->wp_gpio)) + if (!gpio_is_valid(host->wp_gpio)) return -EINVAL; - return gpio_get_value(pdata->wp_gpio); + return gpio_get_value(host->wp_gpio); } static int mxs_mmc_get_cd(struct mmc_host *mmc) { struct mxs_mmc_host *host = mmc_priv(mmc); - return !(readl(host->base + HW_SSP_STATUS) & + return !(readl(host->base + HW_SSP_STATUS(host)) & BM_SSP_STATUS_CARD_DETECT); } @@ -191,7 +188,7 @@ static void mxs_mmc_reset(struct mxs_mmc_host *host) { u32 ctrl0, ctrl1; - mxs_reset_block(host->base); + stmp_reset_block(host->base); ctrl0 = BM_SSP_CTRL0_IGNORE_CRC; ctrl1 = BF_SSP(0x3, CTRL1_SSP_MODE) | @@ -207,7 +204,7 @@ static void mxs_mmc_reset(struct mxs_mmc_host *host) writel(BF_SSP(0xffff, TIMING_TIMEOUT) | BF_SSP(2, TIMING_CLOCK_DIVIDE) | BF_SSP(0, TIMING_CLOCK_RATE), - host->base + HW_SSP_TIMING); + host->base + HW_SSP_TIMING(host)); if (host->sdio_irq_en) { ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK; @@ -215,7 +212,7 @@ static void mxs_mmc_reset(struct mxs_mmc_host *host) } writel(ctrl0, host->base + HW_SSP_CTRL0); - writel(ctrl1, host->base + HW_SSP_CTRL1); + writel(ctrl1, host->base + HW_SSP_CTRL1(host)); } static void mxs_mmc_start_cmd(struct mxs_mmc_host *host, @@ -229,12 +226,12 @@ static void mxs_mmc_request_done(struct mxs_mmc_host *host) if (mmc_resp_type(cmd) & MMC_RSP_PRESENT) { if (mmc_resp_type(cmd) & MMC_RSP_136) { - cmd->resp[3] = readl(host->base + HW_SSP_SDRESP0); - cmd->resp[2] = readl(host->base + HW_SSP_SDRESP1); - cmd->resp[1] = readl(host->base + HW_SSP_SDRESP2); - cmd->resp[0] = readl(host->base + HW_SSP_SDRESP3); + cmd->resp[3] = readl(host->base + HW_SSP_SDRESP0(host)); + cmd->resp[2] = readl(host->base + HW_SSP_SDRESP1(host)); + cmd->resp[1] = readl(host->base + HW_SSP_SDRESP2(host)); + cmd->resp[0] = readl(host->base + HW_SSP_SDRESP3(host)); } else { - cmd->resp[0] = readl(host->base + HW_SSP_SDRESP0); + cmd->resp[0] = readl(host->base + HW_SSP_SDRESP0(host)); } } @@ -277,9 +274,9 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id) spin_lock(&host->lock); - stat = readl(host->base + HW_SSP_CTRL1); + stat = readl(host->base + HW_SSP_CTRL1(host)); writel(stat & MXS_MMC_IRQ_BITS, - host->base + HW_SSP_CTRL1 + MXS_CLR_ADDR); + host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR); if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN)) mmc_signal_sdio_irq(host->mmc); @@ -485,7 +482,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host) blocks = 1; /* xfer count, block size and count need to be set differently */ - if (ssp_is_old()) { + if (ssp_is_old(host)) { ctrl0 |= BF_SSP(data_size, CTRL0_XFER_COUNT); cmd0 |= BF_SSP(log2_blksz, CMD0_BLOCK_SIZE) | BF_SSP(blocks - 1, CMD0_BLOCK_COUNT); @@ -509,10 +506,10 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host) /* set the timeout count */ timeout = mxs_ns_to_ssp_ticks(host->clk_rate, data->timeout_ns); - val = readl(host->base + HW_SSP_TIMING); + val = readl(host->base + HW_SSP_TIMING(host)); val &= ~(BM_SSP_TIMING_TIMEOUT); val |= BF_SSP(timeout, TIMING_TIMEOUT); - writel(val, host->base + HW_SSP_TIMING); + writel(val, host->base + HW_SSP_TIMING(host)); /* pio */ host->ssp_pio_words[0] = ctrl0; @@ -598,11 +595,11 @@ static void mxs_mmc_set_clk_rate(struct mxs_mmc_host *host, unsigned int rate) ssp_sck = ssp_clk / clock_divide / (1 + clock_rate); - val = readl(host->base + HW_SSP_TIMING); + val = readl(host->base + HW_SSP_TIMING(host)); val &= ~(BM_SSP_TIMING_CLOCK_DIVIDE | BM_SSP_TIMING_CLOCK_RATE); val |= BF_SSP(clock_divide, TIMING_CLOCK_DIVIDE); val |= BF_SSP(clock_rate, TIMING_CLOCK_RATE); - writel(val, host->base + HW_SSP_TIMING); + writel(val, host->base + HW_SSP_TIMING(host)); host->clk_rate = ssp_sck; @@ -637,18 +634,19 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) if (enable) { writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK, - host->base + HW_SSP_CTRL0 + MXS_SET_ADDR); + host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET); writel(BM_SSP_CTRL1_SDIO_IRQ_EN, - host->base + HW_SSP_CTRL1 + MXS_SET_ADDR); + host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_SET); - if (readl(host->base + HW_SSP_STATUS) & BM_SSP_STATUS_SDIO_IRQ) + if (readl(host->base + HW_SSP_STATUS(host)) & + BM_SSP_STATUS_SDIO_IRQ) mmc_signal_sdio_irq(host->mmc); } else { writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK, - host->base + HW_SSP_CTRL0 + MXS_CLR_ADDR); + host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR); writel(BM_SSP_CTRL1_SDIO_IRQ_EN, - host->base + HW_SSP_CTRL1 + MXS_CLR_ADDR); + host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR); } spin_unlock_irqrestore(&host->lock, flags); @@ -669,7 +667,7 @@ static bool mxs_mmc_dma_filter(struct dma_chan *chan, void *param) if (!mxs_dma_is_apbh(chan)) return false; - if (chan->chan_id != host->dma_res->start) + if (chan->chan_id != host->dma_channel) return false; chan->private = &host->dma_data; @@ -677,11 +675,34 @@ static bool mxs_mmc_dma_filter(struct dma_chan *chan, void *param) return true; } +static struct platform_device_id mxs_mmc_ids[] = { + { + .name = "imx23-mmc", + .driver_data = IMX23_MMC, + }, { + .name = "imx28-mmc", + .driver_data = IMX28_MMC, + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(platform, mxs_mmc_ids); + +static const struct of_device_id mxs_mmc_dt_ids[] = { + { .compatible = "fsl,imx23-mmc", .data = (void *) IMX23_MMC, }, + { .compatible = "fsl,imx28-mmc", .data = (void *) IMX28_MMC, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_mmc_dt_ids); + static int mxs_mmc_probe(struct platform_device *pdev) { + const struct of_device_id *of_id = + of_match_device(mxs_mmc_dt_ids, &pdev->dev); + struct device_node *np = pdev->dev.of_node; struct mxs_mmc_host *host; struct mmc_host *mmc; - struct resource *iores, *dmares, *r; + struct resource *iores, *dmares; struct mxs_mmc_platform_data *pdata; struct pinctrl *pinctrl; int ret = 0, irq_err, irq_dma; @@ -691,46 +712,51 @@ static int mxs_mmc_probe(struct platform_device *pdev) dmares = platform_get_resource(pdev, IORESOURCE_DMA, 0); irq_err = platform_get_irq(pdev, 0); irq_dma = platform_get_irq(pdev, 1); - if (!iores || !dmares || irq_err < 0 || irq_dma < 0) + if (!iores || irq_err < 0 || irq_dma < 0) return -EINVAL; - r = request_mem_region(iores->start, resource_size(iores), pdev->name); - if (!r) - return -EBUSY; - mmc = mmc_alloc_host(sizeof(struct mxs_mmc_host), &pdev->dev); - if (!mmc) { - ret = -ENOMEM; - goto out_release_mem; - } + if (!mmc) + return -ENOMEM; host = mmc_priv(mmc); - host->base = ioremap(r->start, resource_size(r)); + host->base = devm_request_and_ioremap(&pdev->dev, iores); if (!host->base) { - ret = -ENOMEM; + ret = -EADDRNOTAVAIL; goto out_mmc_free; } - /* only major verion does matter */ - host->version = readl(host->base + HW_SSP_VERSION) >> - BP_SSP_VERSION_MAJOR; + if (np) { + host->devid = (enum mxs_mmc_id) of_id->data; + /* + * TODO: This is a temporary solution and should be changed + * to use generic DMA binding later when the helpers get in. + */ + ret = of_property_read_u32(np, "fsl,ssp-dma-channel", + &host->dma_channel); + if (ret) { + dev_err(mmc_dev(host->mmc), + "failed to get dma channel\n"); + goto out_mmc_free; + } + } else { + host->devid = pdev->id_entry->driver_data; + host->dma_channel = dmares->start; + } host->mmc = mmc; - host->res = r; - host->dma_res = dmares; - host->irq = irq_err; host->sdio_irq_en = 0; pinctrl = devm_pinctrl_get_select_default(&pdev->dev); if (IS_ERR(pinctrl)) { ret = PTR_ERR(pinctrl); - goto out_iounmap; + goto out_mmc_free; } host->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(host->clk)) { ret = PTR_ERR(host->clk); - goto out_iounmap; + goto out_mmc_free; } clk_prepare_enable(host->clk); @@ -752,11 +778,20 @@ static int mxs_mmc_probe(struct platform_device *pdev) MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL; pdata = mmc_dev(host->mmc)->platform_data; - if (pdata) { + if (!pdata) { + u32 bus_width = 0; + of_property_read_u32(np, "bus-width", &bus_width); + if (bus_width == 4) + mmc->caps |= MMC_CAP_4_BIT_DATA; + else if (bus_width == 8) + mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; + host->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0); + } else { if (pdata->flags & SLOTF_8_BIT_CAPABLE) mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; if (pdata->flags & SLOTF_4_BIT_CAPABLE) mmc->caps |= MMC_CAP_4_BIT_DATA; + host->wp_gpio = pdata->wp_gpio; } mmc->f_min = 400000; @@ -765,13 +800,14 @@ static int mxs_mmc_probe(struct platform_device *pdev) mmc->max_segs = 52; mmc->max_blk_size = 1 << 0xf; - mmc->max_blk_count = (ssp_is_old()) ? 0xff : 0xffffff; - mmc->max_req_size = (ssp_is_old()) ? 0xffff : 0xffffffff; + mmc->max_blk_count = (ssp_is_old(host)) ? 0xff : 0xffffff; + mmc->max_req_size = (ssp_is_old(host)) ? 0xffff : 0xffffffff; mmc->max_seg_size = dma_get_max_seg_size(host->dmach->device->dev); platform_set_drvdata(pdev, mmc); - ret = request_irq(host->irq, mxs_mmc_irq_handler, 0, DRIVER_NAME, host); + ret = devm_request_irq(&pdev->dev, irq_err, mxs_mmc_irq_handler, 0, + DRIVER_NAME, host); if (ret) goto out_free_dma; @@ -779,26 +815,20 @@ static int mxs_mmc_probe(struct platform_device *pdev) ret = mmc_add_host(mmc); if (ret) - goto out_free_irq; + goto out_free_dma; dev_info(mmc_dev(host->mmc), "initialized\n"); return 0; -out_free_irq: - free_irq(host->irq, host); out_free_dma: if (host->dmach) dma_release_channel(host->dmach); out_clk_put: clk_disable_unprepare(host->clk); clk_put(host->clk); -out_iounmap: - iounmap(host->base); out_mmc_free: mmc_free_host(mmc); -out_release_mem: - release_mem_region(iores->start, resource_size(iores)); return ret; } @@ -806,12 +836,9 @@ static int mxs_mmc_remove(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); struct mxs_mmc_host *host = mmc_priv(mmc); - struct resource *res = host->res; mmc_remove_host(mmc); - free_irq(host->irq, host); - platform_set_drvdata(pdev, NULL); if (host->dmach) @@ -820,12 +847,8 @@ static int mxs_mmc_remove(struct platform_device *pdev) clk_disable_unprepare(host->clk); clk_put(host->clk); - iounmap(host->base); - mmc_free_host(mmc); - release_mem_region(res->start, resource_size(res)); - return 0; } @@ -865,11 +888,13 @@ static const struct dev_pm_ops mxs_mmc_pm_ops = { static struct platform_driver mxs_mmc_driver = { .probe = mxs_mmc_probe, .remove = mxs_mmc_remove, + .id_table = mxs_mmc_ids, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, #ifdef CONFIG_PM .pm = &mxs_mmc_pm_ops, + .of_match_table = mxs_mmc_dt_ids, #endif }, }; diff --git a/include/linux/fsl/mxs-dma.h b/include/linux/fsl/mxs-dma.h index 203d7c4a3e11..55d870238399 100644 --- a/include/linux/fsl/mxs-dma.h +++ b/include/linux/fsl/mxs-dma.h @@ -15,14 +15,6 @@ struct mxs_dma_data { int chan_irq; }; -static inline int mxs_dma_is_apbh(struct dma_chan *chan) -{ - return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbh"); -} - -static inline int mxs_dma_is_apbx(struct dma_chan *chan) -{ - return !strcmp(dev_name(chan->device->dev), "mxs-dma-apbx"); -} - +extern int mxs_dma_is_apbh(struct dma_chan *chan); +extern int mxs_dma_is_apbx(struct dma_chan *chan); #endif /* __MACH_MXS_DMA_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/mmc.h b/include/linux/mmc/mxs-mmc.h similarity index 81% rename from arch/arm/mach-mxs/include/mach/mmc.h rename to include/linux/mmc/mxs-mmc.h index 211547a05564..7c2ad3a7f2f3 100644 --- a/arch/arm/mach-mxs/include/mach/mmc.h +++ b/include/linux/mmc/mxs-mmc.h @@ -6,8 +6,8 @@ * published by the Free Software Foundation. */ -#ifndef __MACH_MXS_MMC_H__ -#define __MACH_MXS_MMC_H__ +#ifndef __LINUX_MMC_MXS_MMC_H__ +#define __LINUX_MMC_MXS_MMC_H__ struct mxs_mmc_platform_data { int wp_gpio; /* write protect pin */ @@ -15,4 +15,5 @@ struct mxs_mmc_platform_data { #define SLOTF_4_BIT_CAPABLE (1 << 0) #define SLOTF_8_BIT_CAPABLE (1 << 1) }; -#endif /* __MACH_MXS_MMC_H__ */ + +#endif /* __LINUX_MMC_MXS_MMC_H__ */