DaVinci: DM646x - platform changes for vpif capture and display drivers
VPIF display changes (Chaithrika) Add platform device and resource structures. Also define a platform specific clock setup function that can be accessed by the driver to configure the clock and CPLD. VPIF caputure changes (Murali) 1) Modify vpif_subdev_info to add board_info, routing information and vpif interface configuration. Remove addr since it is part of board_info 2) Add code to setup channel mode and input decoder path for vpif capture driver Also incorporated comments against version v0 of the patch series and added a spinlock to protect writes to common registers Tested on DM6467 on channel 0 using TVP514x. Following bootargs used for drivers: vpif_capture.ch0_bufsize=829440 vpif_display.ch2_bufsize=829440 Signed-off-by: Manjunath Hadli <mrh@ti.com> Signed-off-by: Brijesh Jadav <brijesh.j@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This commit is contained in:
Muralidharan Karicheri
Kevin Hilman
Родитель
51e68e27d3
Коммит
85609c1ccd
|
|
@ -34,6 +34,8 @@
|
|||
#include <linux/i2c/pcf857x.h>
|
||||
#include <linux/etherdevice.h>
|
||||
|
||||
#include <media/tvp514x.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
|
|
@ -62,6 +64,30 @@
|
|||
#define DM646X_EVM_PHY_MASK (0x2)
|
||||
#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
|
||||
|
||||
#define VIDCLKCTL_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x38)
|
||||
#define VSCLKDIS_OFFSET (DAVINCI_SYSTEM_MODULE_BASE + 0x6c)
|
||||
#define VCH2CLK_MASK (BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
|
||||
#define VCH2CLK_SYSCLK8 (BIT(9))
|
||||
#define VCH2CLK_AUXCLK (BIT(9) | BIT(8))
|
||||
#define VCH3CLK_MASK (BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
|
||||
#define VCH3CLK_SYSCLK8 (BIT(13))
|
||||
#define VCH3CLK_AUXCLK (BIT(14) | BIT(13))
|
||||
|
||||
#define VIDCH2CLK (BIT(10))
|
||||
#define VIDCH3CLK (BIT(11))
|
||||
#define VIDCH1CLK (BIT(4))
|
||||
#define TVP7002_INPUT (BIT(4))
|
||||
#define TVP5147_INPUT (~BIT(4))
|
||||
#define VPIF_INPUT_ONE_CHANNEL (BIT(5))
|
||||
#define VPIF_INPUT_TWO_CHANNEL (~BIT(5))
|
||||
#define TVP5147_CH0 "tvp514x-0"
|
||||
#define TVP5147_CH1 "tvp514x-1"
|
||||
|
||||
static void __iomem *vpif_vidclkctl_reg;
|
||||
static void __iomem *vpif_vsclkdis_reg;
|
||||
/* spin lock for updating above registers */
|
||||
static spinlock_t vpif_reg_lock;
|
||||
|
||||
static struct davinci_uart_config uart_config __initdata = {
|
||||
.enabled_uarts = (1 << 0),
|
||||
};
|
||||
|
|
@ -287,6 +313,40 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct i2c_client *cpld_client;
|
||||
|
||||
static int cpld_video_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
cpld_client = client;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __devexit cpld_video_remove(struct i2c_client *client)
|
||||
{
|
||||
cpld_client = NULL;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id cpld_video_id[] = {
|
||||
{ "cpld_video", 0 },
|
||||
{ }
|
||||
};
|
||||
|
||||
static struct i2c_driver cpld_video_driver = {
|
||||
.driver = {
|
||||
.name = "cpld_video",
|
||||
},
|
||||
.probe = cpld_video_probe,
|
||||
.remove = cpld_video_remove,
|
||||
.id_table = cpld_video_id,
|
||||
};
|
||||
|
||||
static void evm_init_cpld(void)
|
||||
{
|
||||
i2c_add_driver(&cpld_video_driver);
|
||||
}
|
||||
|
||||
static struct i2c_board_info __initdata i2c_info[] = {
|
||||
{
|
||||
I2C_BOARD_INFO("24c256", 0x50),
|
||||
|
|
@ -301,7 +361,10 @@ static struct i2c_board_info __initdata i2c_info[] = {
|
|||
},
|
||||
{
|
||||
I2C_BOARD_INFO("tlv320aic33", 0x18),
|
||||
}
|
||||
},
|
||||
{
|
||||
I2C_BOARD_INFO("cpld_video", 0x3b),
|
||||
},
|
||||
};
|
||||
|
||||
static struct davinci_i2c_platform_data i2c_pdata = {
|
||||
|
|
@ -309,11 +372,265 @@ static struct davinci_i2c_platform_data i2c_pdata = {
|
|||
.bus_delay = 0 /* usec */,
|
||||
};
|
||||
|
||||
static int set_vpif_clock(int mux_mode, int hd)
|
||||
{
|
||||
unsigned long flags;
|
||||
unsigned int value;
|
||||
int val = 0;
|
||||
int err = 0;
|
||||
|
||||
if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg || !cpld_client)
|
||||
return -ENXIO;
|
||||
|
||||
/* disable the clock */
|
||||
spin_lock_irqsave(&vpif_reg_lock, flags);
|
||||
value = __raw_readl(vpif_vsclkdis_reg);
|
||||
value |= (VIDCH3CLK | VIDCH2CLK);
|
||||
__raw_writel(value, vpif_vsclkdis_reg);
|
||||
spin_unlock_irqrestore(&vpif_reg_lock, flags);
|
||||
|
||||
val = i2c_smbus_read_byte(cpld_client);
|
||||
if (val < 0)
|
||||
return val;
|
||||
|
||||
if (mux_mode == 1)
|
||||
val &= ~0x40;
|
||||
else
|
||||
val |= 0x40;
|
||||
|
||||
err = i2c_smbus_write_byte(cpld_client, val);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
value = __raw_readl(vpif_vidclkctl_reg);
|
||||
value &= ~(VCH2CLK_MASK);
|
||||
value &= ~(VCH3CLK_MASK);
|
||||
|
||||
if (hd >= 1)
|
||||
value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8);
|
||||
else
|
||||
value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK);
|
||||
|
||||
__raw_writel(value, vpif_vidclkctl_reg);
|
||||
|
||||
spin_lock_irqsave(&vpif_reg_lock, flags);
|
||||
value = __raw_readl(vpif_vsclkdis_reg);
|
||||
/* enable the clock */
|
||||
value &= ~(VIDCH3CLK | VIDCH2CLK);
|
||||
__raw_writel(value, vpif_vsclkdis_reg);
|
||||
spin_unlock_irqrestore(&vpif_reg_lock, flags);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct vpif_subdev_info dm646x_vpif_subdev[] = {
|
||||
{
|
||||
.name = "adv7343",
|
||||
.board_info = {
|
||||
I2C_BOARD_INFO("adv7343", 0x2a),
|
||||
},
|
||||
},
|
||||
{
|
||||
.name = "ths7303",
|
||||
.board_info = {
|
||||
I2C_BOARD_INFO("ths7303", 0x2c),
|
||||
},
|
||||
},
|
||||
};
|
||||
|
||||
static const char *output[] = {
|
||||
"Composite",
|
||||
"Component",
|
||||
"S-Video",
|
||||
};
|
||||
|
||||
static struct vpif_display_config dm646x_vpif_display_config = {
|
||||
.set_clock = set_vpif_clock,
|
||||
.subdevinfo = dm646x_vpif_subdev,
|
||||
.subdev_count = ARRAY_SIZE(dm646x_vpif_subdev),
|
||||
.output = output,
|
||||
.output_count = ARRAY_SIZE(output),
|
||||
.card_name = "DM646x EVM",
|
||||
};
|
||||
|
||||
/**
|
||||
* setup_vpif_input_path()
|
||||
* @channel: channel id (0 - CH0, 1 - CH1)
|
||||
* @sub_dev_name: ptr sub device name
|
||||
*
|
||||
* This will set vpif input to capture data from tvp514x or
|
||||
* tvp7002.
|
||||
*/
|
||||
static int setup_vpif_input_path(int channel, const char *sub_dev_name)
|
||||
{
|
||||
int err = 0;
|
||||
int val;
|
||||
|
||||
/* for channel 1, we don't do anything */
|
||||
if (channel != 0)
|
||||
return 0;
|
||||
|
||||
if (!cpld_client)
|
||||
return -ENXIO;
|
||||
|
||||
val = i2c_smbus_read_byte(cpld_client);
|
||||
if (val < 0)
|
||||
return val;
|
||||
|
||||
if (!strcmp(sub_dev_name, TVP5147_CH0) ||
|
||||
!strcmp(sub_dev_name, TVP5147_CH1))
|
||||
val &= TVP5147_INPUT;
|
||||
else
|
||||
val |= TVP7002_INPUT;
|
||||
|
||||
err = i2c_smbus_write_byte(cpld_client, val);
|
||||
if (err)
|
||||
return err;
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* setup_vpif_input_channel_mode()
|
||||
* @mux_mode: mux mode. 0 - 1 channel or (1) - 2 channel
|
||||
*
|
||||
* This will setup input mode to one channel (TVP7002) or 2 channel (TVP5147)
|
||||
*/
|
||||
static int setup_vpif_input_channel_mode(int mux_mode)
|
||||
{
|
||||
unsigned long flags;
|
||||
int err = 0;
|
||||
int val;
|
||||
u32 value;
|
||||
|
||||
if (!vpif_vsclkdis_reg || !cpld_client)
|
||||
return -ENXIO;
|
||||
|
||||
val = i2c_smbus_read_byte(cpld_client);
|
||||
if (val < 0)
|
||||
return val;
|
||||
|
||||
spin_lock_irqsave(&vpif_reg_lock, flags);
|
||||
value = __raw_readl(vpif_vsclkdis_reg);
|
||||
if (mux_mode) {
|
||||
val &= VPIF_INPUT_TWO_CHANNEL;
|
||||
value |= VIDCH1CLK;
|
||||
} else {
|
||||
val |= VPIF_INPUT_ONE_CHANNEL;
|
||||
value &= ~VIDCH1CLK;
|
||||
}
|
||||
__raw_writel(value, vpif_vsclkdis_reg);
|
||||
spin_unlock_irqrestore(&vpif_reg_lock, flags);
|
||||
|
||||
err = i2c_smbus_write_byte(cpld_client, val);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct tvp514x_platform_data tvp5146_pdata = {
|
||||
.clk_polarity = 0,
|
||||
.hs_polarity = 1,
|
||||
.vs_polarity = 1
|
||||
};
|
||||
|
||||
#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
|
||||
|
||||
static struct vpif_subdev_info vpif_capture_sdev_info[] = {
|
||||
{
|
||||
.name = TVP5147_CH0,
|
||||
.board_info = {
|
||||
I2C_BOARD_INFO("tvp5146", 0x5d),
|
||||
.platform_data = &tvp5146_pdata,
|
||||
},
|
||||
.input = INPUT_CVBS_VI2B,
|
||||
.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
|
||||
.can_route = 1,
|
||||
.vpif_if = {
|
||||
.if_type = VPIF_IF_BT656,
|
||||
.hd_pol = 1,
|
||||
.vd_pol = 1,
|
||||
.fid_pol = 0,
|
||||
},
|
||||
},
|
||||
{
|
||||
.name = TVP5147_CH1,
|
||||
.board_info = {
|
||||
I2C_BOARD_INFO("tvp5146", 0x5c),
|
||||
.platform_data = &tvp5146_pdata,
|
||||
},
|
||||
.input = INPUT_SVIDEO_VI2C_VI1C,
|
||||
.output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
|
||||
.can_route = 1,
|
||||
.vpif_if = {
|
||||
.if_type = VPIF_IF_BT656,
|
||||
.hd_pol = 1,
|
||||
.vd_pol = 1,
|
||||
.fid_pol = 0,
|
||||
},
|
||||
},
|
||||
};
|
||||
|
||||
static const struct vpif_input dm6467_ch0_inputs[] = {
|
||||
{
|
||||
.input = {
|
||||
.index = 0,
|
||||
.name = "Composite",
|
||||
.type = V4L2_INPUT_TYPE_CAMERA,
|
||||
.std = TVP514X_STD_ALL,
|
||||
},
|
||||
.subdev_name = TVP5147_CH0,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct vpif_input dm6467_ch1_inputs[] = {
|
||||
{
|
||||
.input = {
|
||||
.index = 0,
|
||||
.name = "S-Video",
|
||||
.type = V4L2_INPUT_TYPE_CAMERA,
|
||||
.std = TVP514X_STD_ALL,
|
||||
},
|
||||
.subdev_name = TVP5147_CH1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct vpif_capture_config dm646x_vpif_capture_cfg = {
|
||||
.setup_input_path = setup_vpif_input_path,
|
||||
.setup_input_channel_mode = setup_vpif_input_channel_mode,
|
||||
.subdev_info = vpif_capture_sdev_info,
|
||||
.subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
|
||||
.chan_config[0] = {
|
||||
.inputs = dm6467_ch0_inputs,
|
||||
.input_count = ARRAY_SIZE(dm6467_ch0_inputs),
|
||||
},
|
||||
.chan_config[1] = {
|
||||
.inputs = dm6467_ch1_inputs,
|
||||
.input_count = ARRAY_SIZE(dm6467_ch1_inputs),
|
||||
},
|
||||
};
|
||||
|
||||
static void __init evm_init_video(void)
|
||||
{
|
||||
vpif_vidclkctl_reg = ioremap(VIDCLKCTL_OFFSET, 4);
|
||||
vpif_vsclkdis_reg = ioremap(VSCLKDIS_OFFSET, 4);
|
||||
if (!vpif_vidclkctl_reg || !vpif_vsclkdis_reg) {
|
||||
pr_err("Can't map VPIF VIDCLKCTL or VSCLKDIS registers\n");
|
||||
return;
|
||||
}
|
||||
spin_lock_init(&vpif_reg_lock);
|
||||
|
||||
dm646x_setup_vpif(&dm646x_vpif_display_config,
|
||||
&dm646x_vpif_capture_cfg);
|
||||
}
|
||||
|
||||
static void __init evm_init_i2c(void)
|
||||
{
|
||||
davinci_init_i2c(&i2c_pdata);
|
||||
i2c_add_driver(&dm6467evm_cpld_driver);
|
||||
i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
|
||||
evm_init_cpld();
|
||||
evm_init_video();
|
||||
}
|
||||
|
||||
static void __init davinci_map_io(void)
|
||||
|
|
|
|||
|
|
@ -32,6 +32,15 @@
|
|||
#include "clock.h"
|
||||
#include "mux.h"
|
||||
|
||||
#define DAVINCI_VPIF_BASE (0x01C12000)
|
||||
#define VDD3P3V_PWDN_OFFSET (0x48)
|
||||
#define VSCLKDIS_OFFSET (0x6C)
|
||||
|
||||
#define VDD3P3V_VID_MASK (BIT_MASK(3) | BIT_MASK(2) | BIT_MASK(1) |\
|
||||
BIT_MASK(0))
|
||||
#define VSCLKDIS_MASK (BIT_MASK(11) | BIT_MASK(10) | BIT_MASK(9) |\
|
||||
BIT_MASK(8))
|
||||
|
||||
/*
|
||||
* Device specific clocks
|
||||
*/
|
||||
|
|
@ -686,6 +695,75 @@ static struct platform_device dm646x_dit_device = {
|
|||
.id = -1,
|
||||
};
|
||||
|
||||
static u64 vpif_dma_mask = DMA_BIT_MASK(32);
|
||||
|
||||
static struct resource vpif_resource[] = {
|
||||
{
|
||||
.start = DAVINCI_VPIF_BASE,
|
||||
.end = DAVINCI_VPIF_BASE + 0x03ff,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}
|
||||
};
|
||||
|
||||
static struct platform_device vpif_dev = {
|
||||
.name = "vpif",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.dma_mask = &vpif_dma_mask,
|
||||
.coherent_dma_mask = DMA_BIT_MASK(32),
|
||||
},
|
||||
.resource = vpif_resource,
|
||||
.num_resources = ARRAY_SIZE(vpif_resource),
|
||||
};
|
||||
|
||||
static struct resource vpif_display_resource[] = {
|
||||
{
|
||||
.start = IRQ_DM646X_VP_VERTINT2,
|
||||
.end = IRQ_DM646X_VP_VERTINT2,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
{
|
||||
.start = IRQ_DM646X_VP_VERTINT3,
|
||||
.end = IRQ_DM646X_VP_VERTINT3,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device vpif_display_dev = {
|
||||
.name = "vpif_display",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.dma_mask = &vpif_dma_mask,
|
||||
.coherent_dma_mask = DMA_BIT_MASK(32),
|
||||
},
|
||||
.resource = vpif_display_resource,
|
||||
.num_resources = ARRAY_SIZE(vpif_display_resource),
|
||||
};
|
||||
|
||||
static struct resource vpif_capture_resource[] = {
|
||||
{
|
||||
.start = IRQ_DM646X_VP_VERTINT0,
|
||||
.end = IRQ_DM646X_VP_VERTINT0,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
{
|
||||
.start = IRQ_DM646X_VP_VERTINT1,
|
||||
.end = IRQ_DM646X_VP_VERTINT1,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device vpif_capture_dev = {
|
||||
.name = "vpif_capture",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.dma_mask = &vpif_dma_mask,
|
||||
.coherent_dma_mask = DMA_BIT_MASK(32),
|
||||
},
|
||||
.resource = vpif_capture_resource,
|
||||
.num_resources = ARRAY_SIZE(vpif_capture_resource),
|
||||
};
|
||||
|
||||
/*----------------------------------------------------------------------*/
|
||||
|
||||
static struct map_desc dm646x_io_desc[] = {
|
||||
|
|
@ -814,6 +892,32 @@ void __init dm646x_init_mcasp1(struct snd_platform_data *pdata)
|
|||
platform_device_register(&dm646x_dit_device);
|
||||
}
|
||||
|
||||
void dm646x_setup_vpif(struct vpif_display_config *display_config,
|
||||
struct vpif_capture_config *capture_config)
|
||||
{
|
||||
unsigned int value;
|
||||
void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
|
||||
|
||||
value = __raw_readl(base + VSCLKDIS_OFFSET);
|
||||
value &= ~VSCLKDIS_MASK;
|
||||
__raw_writel(value, base + VSCLKDIS_OFFSET);
|
||||
|
||||
value = __raw_readl(base + VDD3P3V_PWDN_OFFSET);
|
||||
value &= ~VDD3P3V_VID_MASK;
|
||||
__raw_writel(value, base + VDD3P3V_PWDN_OFFSET);
|
||||
|
||||
davinci_cfg_reg(DM646X_STSOMUX_DISABLE);
|
||||
davinci_cfg_reg(DM646X_STSIMUX_DISABLE);
|
||||
davinci_cfg_reg(DM646X_PTSOMUX_DISABLE);
|
||||
davinci_cfg_reg(DM646X_PTSIMUX_DISABLE);
|
||||
|
||||
vpif_display_dev.dev.platform_data = display_config;
|
||||
vpif_capture_dev.dev.platform_data = capture_config;
|
||||
platform_device_register(&vpif_dev);
|
||||
platform_device_register(&vpif_display_dev);
|
||||
platform_device_register(&vpif_capture_dev);
|
||||
}
|
||||
|
||||
void __init dm646x_init(void)
|
||||
{
|
||||
davinci_common_init(&davinci_soc_info_dm646x);
|
||||
|
|
|
|||
|
|
@ -14,6 +14,8 @@
|
|||
#include <mach/hardware.h>
|
||||
#include <mach/emac.h>
|
||||
#include <mach/asp.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/videodev2.h>
|
||||
|
||||
#define DM646X_EMAC_BASE (0x01C80000)
|
||||
#define DM646X_EMAC_CNTRL_OFFSET (0x0000)
|
||||
|
|
@ -29,4 +31,61 @@ void __init dm646x_init_ide(void);
|
|||
void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
|
||||
void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
|
||||
|
||||
void dm646x_video_init(void);
|
||||
|
||||
enum vpif_if_type {
|
||||
VPIF_IF_BT656,
|
||||
VPIF_IF_BT1120,
|
||||
VPIF_IF_RAW_BAYER
|
||||
};
|
||||
|
||||
struct vpif_interface {
|
||||
enum vpif_if_type if_type;
|
||||
unsigned hd_pol:1;
|
||||
unsigned vd_pol:1;
|
||||
unsigned fid_pol:1;
|
||||
};
|
||||
|
||||
struct vpif_subdev_info {
|
||||
const char *name;
|
||||
struct i2c_board_info board_info;
|
||||
u32 input;
|
||||
u32 output;
|
||||
unsigned can_route:1;
|
||||
struct vpif_interface vpif_if;
|
||||
};
|
||||
|
||||
struct vpif_display_config {
|
||||
int (*set_clock)(int, int);
|
||||
struct vpif_subdev_info *subdevinfo;
|
||||
int subdev_count;
|
||||
const char **output;
|
||||
int output_count;
|
||||
const char *card_name;
|
||||
};
|
||||
|
||||
struct vpif_input {
|
||||
struct v4l2_input input;
|
||||
const char *subdev_name;
|
||||
};
|
||||
|
||||
#define VPIF_CAPTURE_MAX_CHANNELS 2
|
||||
|
||||
struct vpif_capture_chan_config {
|
||||
const struct vpif_input *inputs;
|
||||
int input_count;
|
||||
};
|
||||
|
||||
struct vpif_capture_config {
|
||||
int (*setup_input_channel_mode)(int);
|
||||
int (*setup_input_path)(int, const char *);
|
||||
struct vpif_capture_chan_config chan_config[VPIF_CAPTURE_MAX_CHANNELS];
|
||||
struct vpif_subdev_info *subdev_info;
|
||||
int subdev_count;
|
||||
const char *card_name;
|
||||
};
|
||||
|
||||
void dm646x_setup_vpif(struct vpif_display_config *,
|
||||
struct vpif_capture_config *);
|
||||
|
||||
#endif /* __ASM_ARCH_DM646X_H */
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче