MIPS: I2C: Add driver for Cavium OCTEON I2C ports.
Signed-off-by: Rade Bozic <rade.bozic.ext@nsn.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Michael Lawnick <michael.lawnick.ext@nsn.com> To: linux-mips@linux-mips.org To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: rade.bozic.ext@nsn.com Cc: Michael Lawnick <michael.lawnick.ext@nsn.com> Patchwork: http://patchwork.linux-mips.org/patch/890/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Rade Bozic
Ralf Baechle
Родитель
f41c3c1b3e
Коммит
85660f43a3
|
|
@ -564,6 +564,16 @@ config I2C_VERSATILE
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-versatile.
|
||||
|
||||
config I2C_OCTEON
|
||||
tristate "Cavium OCTEON I2C bus support"
|
||||
depends on CPU_CAVIUM_OCTEON
|
||||
help
|
||||
Say yes if you want to support the I2C serial bus on Cavium
|
||||
OCTEON SOC.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called i2c-octeon.
|
||||
|
||||
comment "External I2C/SMBus adapter drivers"
|
||||
|
||||
config I2C_PARPORT
|
||||
|
|
|
|||
|
|
@ -54,6 +54,7 @@ obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o
|
|||
obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
|
||||
obj-$(CONFIG_I2C_STU300) += i2c-stu300.o
|
||||
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
|
||||
obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
|
||||
|
||||
# External I2C/SMBus adapter drivers
|
||||
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,651 @@
|
|||
/*
|
||||
* (C) Copyright 2009-2010
|
||||
* Nokia Siemens Networks, michael.lawnick.ext@nsn.com
|
||||
*
|
||||
* Portions Copyright (C) 2010 Cavium Networks, Inc.
|
||||
*
|
||||
* This is a driver for the i2c adapter in Cavium Networks' OCTEON processors.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/init.h>
|
||||
|
||||
#include <linux/io.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <asm/octeon/octeon.h>
|
||||
|
||||
#define DRV_NAME "i2c-octeon"
|
||||
|
||||
/* The previous out-of-tree version was implicitly version 1.0. */
|
||||
#define DRV_VERSION "2.0"
|
||||
|
||||
/* register offsets */
|
||||
#define SW_TWSI 0x00
|
||||
#define TWSI_INT 0x10
|
||||
|
||||
/* Controller command patterns */
|
||||
#define SW_TWSI_V 0x8000000000000000ull
|
||||
#define SW_TWSI_EOP_TWSI_DATA 0x0C00000100000000ull
|
||||
#define SW_TWSI_EOP_TWSI_CTL 0x0C00000200000000ull
|
||||
#define SW_TWSI_EOP_TWSI_CLKCTL 0x0C00000300000000ull
|
||||
#define SW_TWSI_EOP_TWSI_STAT 0x0C00000300000000ull
|
||||
#define SW_TWSI_EOP_TWSI_RST 0x0C00000700000000ull
|
||||
#define SW_TWSI_OP_TWSI_CLK 0x0800000000000000ull
|
||||
#define SW_TWSI_R 0x0100000000000000ull
|
||||
|
||||
/* Controller command and status bits */
|
||||
#define TWSI_CTL_CE 0x80
|
||||
#define TWSI_CTL_ENAB 0x40
|
||||
#define TWSI_CTL_STA 0x20
|
||||
#define TWSI_CTL_STP 0x10
|
||||
#define TWSI_CTL_IFLG 0x08
|
||||
#define TWSI_CTL_AAK 0x04
|
||||
|
||||
/* Some status values */
|
||||
#define STAT_START 0x08
|
||||
#define STAT_RSTART 0x10
|
||||
#define STAT_TXADDR_ACK 0x18
|
||||
#define STAT_TXDATA_ACK 0x28
|
||||
#define STAT_RXADDR_ACK 0x40
|
||||
#define STAT_RXDATA_ACK 0x50
|
||||
#define STAT_IDLE 0xF8
|
||||
|
||||
struct octeon_i2c {
|
||||
wait_queue_head_t queue;
|
||||
struct i2c_adapter adap;
|
||||
int irq;
|
||||
int twsi_freq;
|
||||
int sys_freq;
|
||||
resource_size_t twsi_phys;
|
||||
void __iomem *twsi_base;
|
||||
resource_size_t regsize;
|
||||
struct device *dev;
|
||||
};
|
||||
|
||||
/**
|
||||
* octeon_i2c_write_sw - write an I2C core register.
|
||||
* @i2c: The struct octeon_i2c.
|
||||
* @eop_reg: Register selector.
|
||||
* @data: Value to be written.
|
||||
*
|
||||
* The I2C core registers are accessed indirectly via the SW_TWSI CSR.
|
||||
*/
|
||||
static void octeon_i2c_write_sw(struct octeon_i2c *i2c,
|
||||
u64 eop_reg,
|
||||
u8 data)
|
||||
{
|
||||
u64 tmp;
|
||||
|
||||
__raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI);
|
||||
do {
|
||||
tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
|
||||
} while ((tmp & SW_TWSI_V) != 0);
|
||||
}
|
||||
|
||||
/**
|
||||
* octeon_i2c_read_sw - write an I2C core register.
|
||||
* @i2c: The struct octeon_i2c.
|
||||
* @eop_reg: Register selector.
|
||||
*
|
||||
* Returns the data.
|
||||
*
|
||||
* The I2C core registers are accessed indirectly via the SW_TWSI CSR.
|
||||
*/
|
||||
static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
|
||||
{
|
||||
u64 tmp;
|
||||
|
||||
__raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI);
|
||||
do {
|
||||
tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
|
||||
} while ((tmp & SW_TWSI_V) != 0);
|
||||
|
||||
return tmp & 0xFF;
|
||||
}
|
||||
|
||||
/**
|
||||
* octeon_i2c_write_int - write the TWSI_INT register
|
||||
* @i2c: The struct octeon_i2c.
|
||||
* @data: Value to be written.
|
||||
*/
|
||||
static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
|
||||
{
|
||||
u64 tmp;
|
||||
|
||||
__raw_writeq(data, i2c->twsi_base + TWSI_INT);
|
||||
tmp = __raw_readq(i2c->twsi_base + TWSI_INT);
|
||||
}
|
||||
|
||||
/**
|
||||
* octeon_i2c_int_enable - enable the TS interrupt.
|
||||
* @i2c: The struct octeon_i2c.
|
||||
*
|
||||
* The interrupt will be asserted when there is non-STAT_IDLE state in
|
||||
* the SW_TWSI_EOP_TWSI_STAT register.
|
||||
*/
|
||||
static void octeon_i2c_int_enable(struct octeon_i2c *i2c)
|
||||
{
|
||||
octeon_i2c_write_int(i2c, 0x40);
|
||||
}
|
||||
|
||||
/**
|
||||
* octeon_i2c_int_disable - disable the TS interrupt.
|
||||
* @i2c: The struct octeon_i2c.
|
||||
*/
|
||||
static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
|
||||
{
|
||||
octeon_i2c_write_int(i2c, 0);
|
||||
}
|
||||
|
||||
/**
|
||||
* octeon_i2c_unblock - unblock the bus.
|
||||
* @i2c: The struct octeon_i2c.
|
||||
*
|
||||
* If there was a reset while a device was driving 0 to bus,
|
||||
* bus is blocked. We toggle it free manually by some clock
|
||||
* cycles and send a stop.
|
||||
*/
|
||||
static void octeon_i2c_unblock(struct octeon_i2c *i2c)
|
||||
{
|
||||
int i;
|
||||
|
||||
dev_dbg(i2c->dev, "%s\n", __func__);
|
||||
for (i = 0; i < 9; i++) {
|
||||
octeon_i2c_write_int(i2c, 0x0);
|
||||
udelay(5);
|
||||
octeon_i2c_write_int(i2c, 0x200);
|
||||
udelay(5);
|
||||
}
|
||||
octeon_i2c_write_int(i2c, 0x300);
|
||||
udelay(5);
|
||||
octeon_i2c_write_int(i2c, 0x100);
|
||||
udelay(5);
|
||||
octeon_i2c_write_int(i2c, 0x0);
|
||||
}
|
||||
|
||||
/**
|
||||
* octeon_i2c_isr - the interrupt service routine.
|
||||
* @int: The irq, unused.
|
||||
* @dev_id: Our struct octeon_i2c.
|
||||
*/
|
||||
static irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
|
||||
{
|
||||
struct octeon_i2c *i2c = dev_id;
|
||||
|
||||
octeon_i2c_int_disable(i2c);
|
||||
wake_up_interruptible(&i2c->queue);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
|
||||
static int octeon_i2c_test_iflg(struct octeon_i2c *i2c)
|
||||
{
|
||||
return (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_CTL) & TWSI_CTL_IFLG) != 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* octeon_i2c_wait - wait for the IFLG to be set.
|
||||
* @i2c: The struct octeon_i2c.
|
||||
*
|
||||
* Returns 0 on success, otherwise a negative errno.
|
||||
*/
|
||||
static int octeon_i2c_wait(struct octeon_i2c *i2c)
|
||||
{
|
||||
int result;
|
||||
|
||||
octeon_i2c_int_enable(i2c);
|
||||
|
||||
result = wait_event_interruptible_timeout(i2c->queue,
|
||||
octeon_i2c_test_iflg(i2c),
|
||||
i2c->adap.timeout);
|
||||
|
||||
octeon_i2c_int_disable(i2c);
|
||||
|
||||
if (result < 0) {
|
||||
dev_dbg(i2c->dev, "%s: wait interrupted\n", __func__);
|
||||
return result;
|
||||
} else if (result == 0) {
|
||||
dev_dbg(i2c->dev, "%s: timeout\n", __func__);
|
||||
result = -ETIMEDOUT;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* octeon_i2c_start - send START to the bus.
|
||||
* @i2c: The struct octeon_i2c.
|
||||
*
|
||||
* Returns 0 on success, otherwise a negative errno.
|
||||
*/
|
||||
static int octeon_i2c_start(struct octeon_i2c *i2c)
|
||||
{
|
||||
u8 data;
|
||||
int result;
|
||||
|
||||
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
|
||||
TWSI_CTL_ENAB | TWSI_CTL_STA);
|
||||
|
||||
result = octeon_i2c_wait(i2c);
|
||||
if (result) {
|
||||
if (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT) == STAT_IDLE) {
|
||||
/*
|
||||
* Controller refused to send start flag May
|
||||
* be a client is holding SDA low - let's try
|
||||
* to free it.
|
||||
*/
|
||||
octeon_i2c_unblock(i2c);
|
||||
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
|
||||
TWSI_CTL_ENAB | TWSI_CTL_STA);
|
||||
|
||||
result = octeon_i2c_wait(i2c);
|
||||
}
|
||||
if (result)
|
||||
return result;
|
||||
}
|
||||
|
||||
data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
|
||||
if ((data != STAT_START) && (data != STAT_RSTART)) {
|
||||
dev_err(i2c->dev, "%s: bad status (0x%x)\n", __func__, data);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* octeon_i2c_stop - send STOP to the bus.
|
||||
* @i2c: The struct octeon_i2c.
|
||||
*
|
||||
* Returns 0 on success, otherwise a negative errno.
|
||||
*/
|
||||
static int octeon_i2c_stop(struct octeon_i2c *i2c)
|
||||
{
|
||||
u8 data;
|
||||
|
||||
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
|
||||
TWSI_CTL_ENAB | TWSI_CTL_STP);
|
||||
|
||||
data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
|
||||
|
||||
if (data != STAT_IDLE) {
|
||||
dev_err(i2c->dev, "%s: bad status(0x%x)\n", __func__, data);
|
||||
return -EIO;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* octeon_i2c_write - send data to the bus.
|
||||
* @i2c: The struct octeon_i2c.
|
||||
* @target: Target address.
|
||||
* @data: Pointer to the data to be sent.
|
||||
* @length: Length of the data.
|
||||
*
|
||||
* The address is sent over the bus, then the data.
|
||||
*
|
||||
* Returns 0 on success, otherwise a negative errno.
|
||||
*/
|
||||
static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
|
||||
const u8 *data, int length)
|
||||
{
|
||||
int i, result;
|
||||
u8 tmp;
|
||||
|
||||
result = octeon_i2c_start(i2c);
|
||||
if (result)
|
||||
return result;
|
||||
|
||||
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, target << 1);
|
||||
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
|
||||
|
||||
result = octeon_i2c_wait(i2c);
|
||||
if (result)
|
||||
return result;
|
||||
|
||||
for (i = 0; i < length; i++) {
|
||||
tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
|
||||
if ((tmp != STAT_TXADDR_ACK) && (tmp != STAT_TXDATA_ACK)) {
|
||||
dev_err(i2c->dev,
|
||||
"%s: bad status before write (0x%x)\n",
|
||||
__func__, tmp);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, data[i]);
|
||||
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
|
||||
|
||||
result = octeon_i2c_wait(i2c);
|
||||
if (result)
|
||||
return result;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* octeon_i2c_read - receive data from the bus.
|
||||
* @i2c: The struct octeon_i2c.
|
||||
* @target: Target address.
|
||||
* @data: Pointer to the location to store the datae .
|
||||
* @length: Length of the data.
|
||||
*
|
||||
* The address is sent over the bus, then the data is read.
|
||||
*
|
||||
* Returns 0 on success, otherwise a negative errno.
|
||||
*/
|
||||
static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
|
||||
u8 *data, int length)
|
||||
{
|
||||
int i, result;
|
||||
u8 tmp;
|
||||
|
||||
if (length < 1)
|
||||
return -EINVAL;
|
||||
|
||||
result = octeon_i2c_start(i2c);
|
||||
if (result)
|
||||
return result;
|
||||
|
||||
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target<<1) | 1);
|
||||
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
|
||||
|
||||
result = octeon_i2c_wait(i2c);
|
||||
if (result)
|
||||
return result;
|
||||
|
||||
for (i = 0; i < length; i++) {
|
||||
tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
|
||||
if ((tmp != STAT_RXDATA_ACK) && (tmp != STAT_RXADDR_ACK)) {
|
||||
dev_err(i2c->dev,
|
||||
"%s: bad status before read (0x%x)\n",
|
||||
__func__, tmp);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
if (i+1 < length)
|
||||
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
|
||||
TWSI_CTL_ENAB | TWSI_CTL_AAK);
|
||||
else
|
||||
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
|
||||
TWSI_CTL_ENAB);
|
||||
|
||||
result = octeon_i2c_wait(i2c);
|
||||
if (result)
|
||||
return result;
|
||||
|
||||
data[i] = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_DATA);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* octeon_i2c_xfer - The driver's master_xfer function.
|
||||
* @adap: Pointer to the i2c_adapter structure.
|
||||
* @msgs: Pointer to the messages to be processed.
|
||||
* @num: Length of the MSGS array.
|
||||
*
|
||||
* Returns the number of messages processed, or a negative errno on
|
||||
* failure.
|
||||
*/
|
||||
static int octeon_i2c_xfer(struct i2c_adapter *adap,
|
||||
struct i2c_msg *msgs,
|
||||
int num)
|
||||
{
|
||||
struct i2c_msg *pmsg;
|
||||
int i;
|
||||
int ret = 0;
|
||||
struct octeon_i2c *i2c = i2c_get_adapdata(adap);
|
||||
|
||||
for (i = 0; ret == 0 && i < num; i++) {
|
||||
pmsg = &msgs[i];
|
||||
dev_dbg(i2c->dev,
|
||||
"Doing %s %d byte(s) to/from 0x%02x - %d of %d messages\n",
|
||||
pmsg->flags & I2C_M_RD ? "read" : "write",
|
||||
pmsg->len, pmsg->addr, i + 1, num);
|
||||
if (pmsg->flags & I2C_M_RD)
|
||||
ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
|
||||
pmsg->len);
|
||||
else
|
||||
ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf,
|
||||
pmsg->len);
|
||||
}
|
||||
octeon_i2c_stop(i2c);
|
||||
|
||||
return (ret != 0) ? ret : num;
|
||||
}
|
||||
|
||||
static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
|
||||
{
|
||||
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
||||
}
|
||||
|
||||
static const struct i2c_algorithm octeon_i2c_algo = {
|
||||
.master_xfer = octeon_i2c_xfer,
|
||||
.functionality = octeon_i2c_functionality,
|
||||
};
|
||||
|
||||
static struct i2c_adapter octeon_i2c_ops = {
|
||||
.owner = THIS_MODULE,
|
||||
.name = "OCTEON adapter",
|
||||
.algo = &octeon_i2c_algo,
|
||||
.timeout = 2,
|
||||
};
|
||||
|
||||
/**
|
||||
* octeon_i2c_setclock - Calculate and set clock divisors.
|
||||
*/
|
||||
static int __init octeon_i2c_setclock(struct octeon_i2c *i2c)
|
||||
{
|
||||
int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
|
||||
int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
|
||||
|
||||
for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
|
||||
/*
|
||||
* An mdiv value of less than 2 seems to not work well
|
||||
* with ds1337 RTCs, so we constrain it to larger
|
||||
* values.
|
||||
*/
|
||||
for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) {
|
||||
/*
|
||||
* For given ndiv and mdiv values check the
|
||||
* two closest thp values.
|
||||
*/
|
||||
tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
|
||||
tclk *= (1 << ndiv_idx);
|
||||
thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
|
||||
for (inc = 0; inc <= 1; inc++) {
|
||||
thp_idx = thp_base + inc;
|
||||
if (thp_idx < 5 || thp_idx > 0xff)
|
||||
continue;
|
||||
|
||||
foscl = i2c->sys_freq / (2 * (thp_idx + 1));
|
||||
foscl = foscl / (1 << ndiv_idx);
|
||||
foscl = foscl / (mdiv_idx + 1) / 10;
|
||||
diff = abs(foscl - i2c->twsi_freq);
|
||||
if (diff < delta_hz) {
|
||||
delta_hz = diff;
|
||||
thp = thp_idx;
|
||||
mdiv = mdiv_idx;
|
||||
ndiv = ndiv_idx;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
octeon_i2c_write_sw(i2c, SW_TWSI_OP_TWSI_CLK, thp);
|
||||
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __init octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
|
||||
{
|
||||
u8 status;
|
||||
int tries;
|
||||
|
||||
/* disable high level controller, enable bus access */
|
||||
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
|
||||
|
||||
/* reset controller */
|
||||
octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_RST, 0);
|
||||
|
||||
for (tries = 10; tries; tries--) {
|
||||
udelay(1);
|
||||
status = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
|
||||
if (status == STAT_IDLE)
|
||||
return 0;
|
||||
}
|
||||
dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n", __func__, status);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
static int __devinit octeon_i2c_probe(struct platform_device *pdev)
|
||||
{
|
||||
int irq, result = 0;
|
||||
struct octeon_i2c *i2c;
|
||||
struct octeon_i2c_data *i2c_data;
|
||||
struct resource *res_mem;
|
||||
|
||||
/* All adaptors have an irq. */
|
||||
irq = platform_get_irq(pdev, 0);
|
||||
if (irq < 0)
|
||||
return irq;
|
||||
|
||||
i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
|
||||
if (!i2c) {
|
||||
dev_err(&pdev->dev, "kzalloc failed\n");
|
||||
result = -ENOMEM;
|
||||
goto out;
|
||||
}
|
||||
i2c->dev = &pdev->dev;
|
||||
i2c_data = pdev->dev.platform_data;
|
||||
|
||||
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
|
||||
if (res_mem == NULL) {
|
||||
dev_err(i2c->dev, "found no memory resource\n");
|
||||
result = -ENXIO;
|
||||
goto fail_region;
|
||||
}
|
||||
|
||||
if (i2c_data == NULL) {
|
||||
dev_err(i2c->dev, "no I2C frequency data\n");
|
||||
result = -ENXIO;
|
||||
goto fail_region;
|
||||
}
|
||||
|
||||
i2c->twsi_phys = res_mem->start;
|
||||
i2c->regsize = resource_size(res_mem);
|
||||
i2c->twsi_freq = i2c_data->i2c_freq;
|
||||
i2c->sys_freq = i2c_data->sys_freq;
|
||||
|
||||
if (!request_mem_region(i2c->twsi_phys, i2c->regsize, res_mem->name)) {
|
||||
dev_err(i2c->dev, "request_mem_region failed\n");
|
||||
goto fail_region;
|
||||
}
|
||||
i2c->twsi_base = ioremap(i2c->twsi_phys, i2c->regsize);
|
||||
|
||||
init_waitqueue_head(&i2c->queue);
|
||||
|
||||
i2c->irq = irq;
|
||||
|
||||
result = request_irq(i2c->irq, octeon_i2c_isr, 0, DRV_NAME, i2c);
|
||||
if (result < 0) {
|
||||
dev_err(i2c->dev, "failed to attach interrupt\n");
|
||||
goto fail_irq;
|
||||
}
|
||||
|
||||
result = octeon_i2c_initlowlevel(i2c);
|
||||
if (result) {
|
||||
dev_err(i2c->dev, "init low level failed\n");
|
||||
goto fail_add;
|
||||
}
|
||||
|
||||
result = octeon_i2c_setclock(i2c);
|
||||
if (result) {
|
||||
dev_err(i2c->dev, "clock init failed\n");
|
||||
goto fail_add;
|
||||
}
|
||||
|
||||
i2c->adap = octeon_i2c_ops;
|
||||
i2c->adap.dev.parent = &pdev->dev;
|
||||
i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0;
|
||||
i2c_set_adapdata(&i2c->adap, i2c);
|
||||
platform_set_drvdata(pdev, i2c);
|
||||
|
||||
result = i2c_add_numbered_adapter(&i2c->adap);
|
||||
if (result < 0) {
|
||||
dev_err(i2c->dev, "failed to add adapter\n");
|
||||
goto fail_add;
|
||||
}
|
||||
|
||||
dev_info(i2c->dev, "version %s\n", DRV_VERSION);
|
||||
|
||||
return result;
|
||||
|
||||
fail_add:
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
free_irq(i2c->irq, i2c);
|
||||
fail_irq:
|
||||
iounmap(i2c->twsi_base);
|
||||
release_mem_region(i2c->twsi_phys, i2c->regsize);
|
||||
fail_region:
|
||||
kfree(i2c);
|
||||
out:
|
||||
return result;
|
||||
};
|
||||
|
||||
static int __devexit octeon_i2c_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct octeon_i2c *i2c = platform_get_drvdata(pdev);
|
||||
|
||||
i2c_del_adapter(&i2c->adap);
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
free_irq(i2c->irq, i2c);
|
||||
iounmap(i2c->twsi_base);
|
||||
release_mem_region(i2c->twsi_phys, i2c->regsize);
|
||||
kfree(i2c);
|
||||
return 0;
|
||||
};
|
||||
|
||||
static struct platform_driver octeon_i2c_driver = {
|
||||
.probe = octeon_i2c_probe,
|
||||
.remove = __devexit_p(octeon_i2c_remove),
|
||||
.driver = {
|
||||
.owner = THIS_MODULE,
|
||||
.name = DRV_NAME,
|
||||
},
|
||||
};
|
||||
|
||||
static int __init octeon_i2c_init(void)
|
||||
{
|
||||
int rv;
|
||||
|
||||
rv = platform_driver_register(&octeon_i2c_driver);
|
||||
return rv;
|
||||
}
|
||||
|
||||
static void __exit octeon_i2c_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&octeon_i2c_driver);
|
||||
}
|
||||
|
||||
MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>");
|
||||
MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_VERSION(DRV_VERSION);
|
||||
MODULE_ALIAS("platform:" DRV_NAME);
|
||||
|
||||
module_init(octeon_i2c_init);
|
||||
module_exit(octeon_i2c_exit);
|
||||
Загрузка…
Ссылка в новой задаче