ARM: mvebu: add DT support for Seagate NAS 2 and 4-Bay
This patch adds DT support for the Seagate NAS 2 and 4-Bay. Here are some information allowing to identify these devices: Product name | Seagate NAS 2-Bay | Seagate NAS 4-Bay Code name (board/PCB) | Dart 2-Bay | Dart 4-Bay Model name (case sticker) | SRPD20 | SRPD40 Material desc (product spec) | STCTxxxxxxx | STCUxxxxxxx Chipset list (common): - SoC Marvell Armada 370 88F6707, CPU @1.2GHz - SDRAM memory: 512MB DDR3 600MHz (16-bits bandwidth) - NAND flash 256MB, 8-bits (Micron MT29F2G08AAB or Hinyx H27U2G8F2CTR-BC) - 2 SATA II ports (SoC) - 1 Ethernet Gigabit ports (PHY Marvell 88E1518) - 2 USB3 host ports (PCIe controller ASM1042) - GPIO fan (4 speeds) - External I2C RTC (MCP7940NT) - 3 push buttons (power, backup and reset) - 2 SATA LEDs (bi-color, blue and red) - 1 power LED (bi-color, blue and red) Only on 4-Bay models: - 2 extra SATA III ports (PCIe AHCI controller Marvell 88SE9170) - 1 extra Ethernet Gigabit ports (PHY Marvell 88E1518) - I2C GPIO expander (PCA9554A) - 2 extra SATA LEDs (bi-color, blue and red) Note that support for the white SATA LEDs associated with HDDs 0 and 1 is missing. A dedicated LED driver is needed. Signed-off-by: Vincent Donnefort <vdonnefort@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This commit is contained in:
Vincent Donnefort
Gregory CLEMENT
Родитель
9b24a35cb5
Коммит
85a9efcd4e
|
|
@ -702,6 +702,8 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \
|
|||
armada-370-netgear-rn102.dtb \
|
||||
armada-370-netgear-rn104.dtb \
|
||||
armada-370-rd.dtb \
|
||||
armada-370-seagate-nas-2bay.dtb \
|
||||
armada-370-seagate-nas-4bay.dtb \
|
||||
armada-370-synology-ds213j.dtb
|
||||
dtb-$(CONFIG_MACH_ARMADA_375) += \
|
||||
armada-375-db.dtb
|
||||
|
|
|
|||
|
|
@ -0,0 +1,36 @@
|
|||
/*
|
||||
* Device Tree file for Seagate NAS 2-Bay (Armada 370 SoC).
|
||||
*
|
||||
* Copyright (C) 2015 Seagate
|
||||
*
|
||||
* Author: Vincent Donnefort <vdonnefort@gmail.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Here are some information allowing to identify the device:
|
||||
*
|
||||
* Product name : Seagate NAS 2-Bay
|
||||
* Code name (board/PCB) : Dart 2-Bay
|
||||
* Model name (case sticker) : SRPD20
|
||||
* Material desc (product spec) : STCTxxxxxxx
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "armada-370-seagate-nas-xbay.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Seagate NAS 2-Bay (Dart, SRPD20)";
|
||||
compatible = "seagate,dart-2", "marvell,armada370", "marvell,armada-370-xp";
|
||||
|
||||
gpio-fan {
|
||||
gpio-fan,speed-map =
|
||||
< 0 3
|
||||
950 2
|
||||
1400 1
|
||||
1800 0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,133 @@
|
|||
/*
|
||||
* Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
|
||||
*
|
||||
* Copyright (C) 2015 Seagate
|
||||
*
|
||||
* Author: Vincent Donnefort <vdonnefort@gmail.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Here are some information allowing to identify the device:
|
||||
*
|
||||
* Product name : Seagate NAS 4-Bay
|
||||
* Code name (board/PCB) : Dart 4-Bay
|
||||
* Model name (case sticker) : SRPD40
|
||||
* Material desc (product spec) : STCUxxxxxxx
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "armada-370-seagate-nas-xbay.dtsi"
|
||||
#include <dt-bindings/leds/leds-ns2.h>
|
||||
|
||||
/ {
|
||||
model = "Seagate NAS 4-Bay (Dart, SRPD40)";
|
||||
compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
|
||||
|
||||
soc {
|
||||
pcie-controller {
|
||||
/* SATA AHCI controller 88SE9170 */
|
||||
pcie@1,0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
internal-regs {
|
||||
mdio {
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@74000 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&ge1_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
phy = <&phy1>;
|
||||
phy-mode = "rgmii-id";
|
||||
};
|
||||
|
||||
i2c@11000 {
|
||||
/* I2C GPIO expander (PCA9554A) */
|
||||
pca9554: pca9554@21 {
|
||||
compatible = "nxp,pca9554";
|
||||
reg = <0x21>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "SATA2 power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
regulator@4 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <4>;
|
||||
regulator-name = "SATA3 power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
red-sata2 {
|
||||
label = "dart:red:sata2";
|
||||
gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
red-sata3 {
|
||||
label = "dart:red:sata3";
|
||||
gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds-ns2 {
|
||||
compatible = "lacie,ns2-leds";
|
||||
|
||||
white-sata2 {
|
||||
label = "dart:white:sata2";
|
||||
cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
|
||||
slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
|
||||
num-modes = <4>;
|
||||
modes-map = <NS_V2_LED_SATA 0 0
|
||||
NS_V2_LED_OFF 0 1
|
||||
NS_V2_LED_ON 1 0
|
||||
NS_V2_LED_ON 1 1>;
|
||||
};
|
||||
white-sata3 {
|
||||
label = "dart:white:sata3";
|
||||
cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
|
||||
slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
|
||||
num-modes = <4>;
|
||||
modes-map = <NS_V2_LED_SATA 0 0
|
||||
NS_V2_LED_OFF 0 1
|
||||
NS_V2_LED_ON 1 0
|
||||
NS_V2_LED_ON 1 1>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-fan {
|
||||
gpio-fan,speed-map =
|
||||
< 0 3
|
||||
800 2
|
||||
1050 1
|
||||
1300 0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,231 @@
|
|||
/*
|
||||
* Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC).
|
||||
*
|
||||
* Copyright (C) 2015 Seagate
|
||||
*
|
||||
* Author: Vincent Donnefort <vdonnefort@gmail.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/*
|
||||
* TODO: add support for the white SATA LEDs associated with HDD 0 and 1.
|
||||
*/
|
||||
|
||||
#include "armada-370.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
|
||||
soc {
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
||||
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
|
||||
|
||||
pcie-controller {
|
||||
status = "okay";
|
||||
|
||||
/* USB 3.0 bridge ASM1042A */
|
||||
pcie@2,0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
internal-regs {
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sata@a0000 {
|
||||
nr-ports = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mdio {
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@70000 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&ge0_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
phy = <&phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
};
|
||||
|
||||
i2c@11000 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
pinctrl-names = "default";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
/* RTC - NXP 8563T (second source) */
|
||||
rtc@51 {
|
||||
compatible = "nxp,pcf8563";
|
||||
reg = <0x51>;
|
||||
interrupts = <110>;
|
||||
};
|
||||
/* RTC - MCP7940NT */
|
||||
rtc@6f {
|
||||
compatible = "microchip,mcp7941x";
|
||||
reg = <0x6f>;
|
||||
interrupts = <110>;
|
||||
};
|
||||
};
|
||||
|
||||
nand@d0000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x300000>;
|
||||
};
|
||||
partition@300000 {
|
||||
label = "device-tree";
|
||||
reg = <0x300000 0x20000>;
|
||||
};
|
||||
partition@320000 {
|
||||
label = "linux";
|
||||
reg = <0x320000 0x2000000>;
|
||||
};
|
||||
partition@2320000 {
|
||||
label = "rootfs";
|
||||
reg = <0x2320000 0xdce0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "SATA0 power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "SATA1 power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-fan {
|
||||
compatible = "gpio-fan";
|
||||
gpios = <&gpio2 0 GPIO_ACTIVE_HIGH
|
||||
&gpio2 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
button@1 {
|
||||
label = "Power button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <100>;
|
||||
};
|
||||
button@2 {
|
||||
label = "Backup button";
|
||||
linux,code = <KEY_OPTION>;
|
||||
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <100>;
|
||||
};
|
||||
button@3 {
|
||||
label = "Reset Button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <100>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
white-power {
|
||||
label = "dart:white:power";
|
||||
gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "timer";
|
||||
|
||||
};
|
||||
red-power {
|
||||
label = "dart:red:power";
|
||||
gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
red-sata0 {
|
||||
label = "dart:red:sata0";
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
red-sata1 {
|
||||
label = "dart:red:sata1";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_poweroff {
|
||||
compatible = "gpio-poweroff";
|
||||
gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
hdd0_led_sata_pin: hdd0-led-sata-pin {
|
||||
marvell,pins = "mpp48";
|
||||
marvell,function = "sata1";
|
||||
};
|
||||
hdd0_led_gpio_pin: hdd0-led-gpio-pin {
|
||||
marvell,pins = "mpp48";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
hdd1_led_sata_pin: hdd1-led-sata-pin {
|
||||
marvell,pins = "mpp57";
|
||||
marvell,function = "sata0";
|
||||
};
|
||||
hdd1_led_gpio_pin: hdd1-led-gpio-pin {
|
||||
marvell,pins = "mpp57";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче