V4L/DVB (6172): cx23885: Removing duplicate tuner and demod definitions

A number of Hauppauge boards share the same tuner and demod
configurations. This patch removes duplicate structures.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
Steven Toth 2007-09-04 21:40:47 -03:00 коммит произвёл Mauro Carvalho Chehab
Родитель 31bae4a620
Коммит 86184e06da
1 изменённых файлов: 5 добавлений и 49 удалений

Просмотреть файл

@ -79,7 +79,7 @@ static struct videobuf_queue_ops dvb_qops = {
.buf_release = dvb_buf_release,
};
static struct s5h1409_config hauppauge_hvr1800lp_config = {
static struct s5h1409_config hauppauge_generic_config = {
.demod_address = 0x32 >> 1,
.output_mode = S5H1409_SERIAL_OUTPUT,
.gpio = S5H1409_GPIO_OFF,
@ -88,33 +88,7 @@ static struct s5h1409_config hauppauge_hvr1800lp_config = {
.status_mode = S5H1409_DEMODLOCKING
};
static struct s5h1409_config hauppauge_hvr1800_config = {
.demod_address = 0x32 >> 1,
.output_mode = S5H1409_SERIAL_OUTPUT,
.gpio = S5H1409_GPIO_ON,
.if_freq = 44000,
.inversion = S5H1409_INVERSION_OFF,
.status_mode = S5H1409_DEMODLOCKING
};
static struct s5h1409_config hauppauge_hvr1250_config = {
.demod_address = 0x32 >> 1,
.output_mode = S5H1409_SERIAL_OUTPUT,
.gpio = S5H1409_GPIO_ON,
.if_freq = 44000,
.inversion = S5H1409_INVERSION_OFF,
.status_mode = S5H1409_DEMODLOCKING
};
static struct mt2131_config hauppauge_hvr1800lp_rev2_tunerconfig = {
0x61
};
static struct mt2131_config hauppauge_hvr1800_tunerconfig = {
0x61
};
static struct mt2131_config hauppauge_hvr1250_tunerconfig = {
static struct mt2131_config hauppauge_generic_tunerconfig = {
0x61
};
@ -128,33 +102,15 @@ static int dvb_register(struct cx23885_tsport *port)
/* init frontend */
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1250:
port->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_hvr1250_config,
&dev->i2c_bus[0].i2c_adap);
if (port->dvb.frontend != NULL) {
dvb_attach(mt2131_attach, port->dvb.frontend,
&dev->i2c_bus[0].i2c_adap,
&hauppauge_hvr1250_tunerconfig, 0);
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
port->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_hvr1800lp_config,
&hauppauge_generic_config,
&dev->i2c_bus[0].i2c_adap);
if (port->dvb.frontend != NULL) {
dvb_attach(mt2131_attach, port->dvb.frontend,
&dev->i2c_bus[0].i2c_adap,
&hauppauge_hvr1800lp_rev2_tunerconfig, 0);
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
port->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_hvr1800_config,
&dev->i2c_bus[0].i2c_adap);
if (port->dvb.frontend != NULL) {
dvb_attach(mt2131_attach, port->dvb.frontend,
&dev->i2c_bus[0].i2c_adap,
&hauppauge_hvr1800_tunerconfig, 0);
&hauppauge_generic_tunerconfig, 0);
}
break;
default: