An LCD controller driver for nuc900s.  The Linux LOGO is just fine and the
FB-Test application was ok, too.

Signed-off-by: Wang Qiang <rurality.linux@gmail.com>
Cc: Wang Zongshun <mcuos.com@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Wang Qiang 2010-03-10 15:21:47 -08:00 коммит произвёл Linus Torvalds
Родитель 91d4e0a4c8
Коммит 8661970875
11 изменённых файлов: 1338 добавлений и 1 удалений

Просмотреть файл

@ -590,8 +590,40 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NUC900=y
CONFIG_GPM1040A0_320X240=y
CONFIG_FB_NUC900_DEBUG=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
@ -603,6 +635,25 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y

Просмотреть файл

@ -57,3 +57,4 @@ extern struct platform_device nuc900_device_fmi;
extern struct platform_device nuc900_device_kpi;
extern struct platform_device nuc900_device_rtc;
extern struct platform_device nuc900_device_ts;
extern struct platform_device nuc900_device_lcd;

Просмотреть файл

@ -34,6 +34,7 @@
#include <mach/regs-serial.h>
#include <mach/nuc900_spi.h>
#include <mach/map.h>
#include <mach/fb.h>
#include "cpu.h"
@ -380,6 +381,47 @@ struct platform_device nuc900_device_kpi = {
.resource = nuc900_kpi_resource,
};
#ifdef CONFIG_FB_NUC900
static struct resource nuc900_lcd_resource[] = {
[0] = {
.start = W90X900_PA_LCD,
.end = W90X900_PA_LCD + W90X900_SZ_LCD - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_LCD,
.end = IRQ_LCD,
.flags = IORESOURCE_IRQ,
}
};
static u64 nuc900_device_lcd_dmamask = -1;
struct platform_device nuc900_device_lcd = {
.name = "nuc900-lcd",
.id = -1,
.num_resources = ARRAY_SIZE(nuc900_lcd_resource),
.resource = nuc900_lcd_resource,
.dev = {
.dma_mask = &nuc900_device_lcd_dmamask,
.coherent_dma_mask = -1,
}
};
void nuc900_fb_set_platdata(struct nuc900fb_mach_info *pd)
{
struct nuc900fb_mach_info *npd;
npd = kmalloc(sizeof(*npd), GFP_KERNEL);
if (npd) {
memcpy(npd, pd, sizeof(*npd));
nuc900_device_lcd.dev.platform_data = npd;
} else {
printk(KERN_ERR "no memory for LCD platform data\n");
}
}
#endif
/*Here should be your evb resourse,such as LCD*/
static struct platform_device *nuc900_public_dev[] __initdata = {

Просмотреть файл

@ -0,0 +1,83 @@
/* linux/include/asm/arch-nuc900/fb.h
*
* Copyright (c) 2008 Nuvoton technology corporation
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Changelog:
*
* 2008/08/26 vincen.zswan modify this file for LCD.
*/
#ifndef __ASM_ARM_FB_H
#define __ASM_ARM_FB_H
/* LCD Controller Hardware Desc */
struct nuc900fb_hw {
unsigned int lcd_dccs;
unsigned int lcd_device_ctrl;
unsigned int lcd_mpulcd_cmd;
unsigned int lcd_int_cs;
unsigned int lcd_crtc_size;
unsigned int lcd_crtc_dend;
unsigned int lcd_crtc_hr;
unsigned int lcd_crtc_hsync;
unsigned int lcd_crtc_vr;
unsigned int lcd_va_baddr0;
unsigned int lcd_va_baddr1;
unsigned int lcd_va_fbctrl;
unsigned int lcd_va_scale;
unsigned int lcd_va_test;
unsigned int lcd_va_win;
unsigned int lcd_va_stuff;
};
/* LCD Display Description */
struct nuc900fb_display {
/* LCD Image type */
unsigned type;
/* LCD Screen Size */
unsigned short width;
unsigned short height;
/* LCD Screen Info */
unsigned short xres;
unsigned short yres;
unsigned short bpp;
unsigned long pixclock;
unsigned short left_margin;
unsigned short right_margin;
unsigned short hsync_len;
unsigned short upper_margin;
unsigned short lower_margin;
unsigned short vsync_len;
/* hardware special register value */
unsigned int dccs;
unsigned int devctl;
unsigned int fbctrl;
unsigned int scale;
};
struct nuc900fb_mach_info {
struct nuc900fb_display *displays;
unsigned num_displays;
unsigned default_display;
/* GPIO Setting Info */
unsigned gpio_dir;
unsigned gpio_dir_mask;
unsigned gpio_data;
unsigned gpio_data_mask;
};
extern void __init nuc900_fb_set_platdata(struct nuc900fb_mach_info *);
#endif /* __ASM_ARM_FB_H */

Просмотреть файл

@ -0,0 +1,253 @@
/*
* arch/arm/mach-w90x900/include/mach/regs-serial.h
*
* Copyright (c) 2009 Nuvoton technology corporation
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Description:
* Nuvoton Display, LCM Register list
* Author: Wang Qiang (rurality.linux@gmail.com) 2009/12/11
*
*/
#ifndef __ASM_ARM_W90X900_REGS_LDM_H
#define __ASM_ARM_W90X900_REGS_LDM_H
#include <mach/map.h>
/* Display Controller Control/Status Register */
#define REG_LCM_DCCS (0x00)
#define LCM_DCCS_ENG_RST (1 << 0)
#define LCM_DCCS_VA_EN (1 << 1)
#define LCM_DCCS_OSD_EN (1 << 2)
#define LCM_DCCS_DISP_OUT_EN (1 << 3)
#define LCM_DCCS_DISP_INT_EN (1 << 4)
#define LCM_DCCS_CMD_ON (1 << 5)
#define LCM_DCCS_FIELD_INTR (1 << 6)
#define LCM_DCCS_SINGLE (1 << 7)
enum LCM_DCCS_VA_SRC {
LCM_DCCS_VA_SRC_YUV422 = (0 << 8),
LCM_DCCS_VA_SRC_YCBCR422 = (1 << 8),
LCM_DCCS_VA_SRC_RGB888 = (2 << 8),
LCM_DCCS_VA_SRC_RGB666 = (3 << 8),
LCM_DCCS_VA_SRC_RGB565 = (4 << 8),
LCM_DCCS_VA_SRC_RGB444LOW = (5 << 8),
LCM_DCCS_VA_SRC_RGB444HIGH = (7 << 8)
};
/* Display Device Control Register */
#define REG_LCM_DEV_CTRL (0x04)
enum LCM_DEV_CTRL_SWAP_YCbCr {
LCM_DEV_CTRL_SWAP_UYVY = (0 << 1),
LCM_DEV_CTRL_SWAP_YUYV = (1 << 1),
LCM_DEV_CTRL_SWAP_VYUY = (2 << 1),
LCM_DEV_CTRL_SWAP_YVYU = (3 << 1)
};
enum LCM_DEV_CTRL_RGB_SHIFT {
LCM_DEV_CTRL_RGB_SHIFT_NOT = (0 << 3),
LCM_DEV_CTRL_RGB_SHIFT_ONECYCLE = (1 << 3),
LCM_DEV_CTRL_RGB_SHIFT_TWOCYCLE = (2 << 3),
LCM_DEV_CTRL_RGB_SHIFT_NOT_DEF = (3 << 3)
};
enum LCM_DEV_CTRL_DEVICE {
LCM_DEV_CTRL_DEVICE_YUV422 = (0 << 5),
LCM_DEV_CTRL_DEVICE_YUV444 = (1 << 5),
LCM_DEV_CTRL_DEVICE_UNIPAC = (4 << 5),
LCM_DEV_CTRL_DEVICE_SEIKO_EPSON = (5 << 5),
LCM_DEV_CTRL_DEVICE_HIGH_COLOR = (6 << 5),
LCM_DEV_CTRL_DEVICE_MPU = (7 << 5)
};
#define LCM_DEV_CTRL_LCD_DDA (8)
#define LCM_DEV_CTRL_YUV2CCIR (16)
enum LCM_DEV_CTRL_LCD_SEL {
LCM_DEV_CTRL_LCD_SEL_RGB_GBR = (0 << 17),
LCM_DEV_CTRL_LCD_SEL_BGR_RBG = (1 << 17),
LCM_DEV_CTRL_LCD_SEL_GBR_RGB = (2 << 17),
LCM_DEV_CTRL_LCD_SEL_RBG_BGR = (3 << 17)
};
enum LCM_DEV_CTRL_FAL_D {
LCM_DEV_CTRL_FAL_D_FALLING = (0 << 19),
LCM_DEV_CTRL_FAL_D_RISING = (1 << 19),
};
enum LCM_DEV_CTRL_H_POL {
LCM_DEV_CTRL_H_POL_LOW = (0 << 20),
LCM_DEV_CTRL_H_POL_HIGH = (1 << 20),
};
enum LCM_DEV_CTRL_V_POL {
LCM_DEV_CTRL_V_POL_LOW = (0 << 21),
LCM_DEV_CTRL_V_POL_HIGH = (1 << 21),
};
enum LCM_DEV_CTRL_VR_LACE {
LCM_DEV_CTRL_VR_LACE_NINTERLACE = (0 << 22),
LCM_DEV_CTRL_VR_LACE_INTERLACE = (1 << 22),
};
enum LCM_DEV_CTRL_LACE {
LCM_DEV_CTRL_LACE_NINTERLACE = (0 << 23),
LCM_DEV_CTRL_LACE_INTERLACE = (1 << 23),
};
enum LCM_DEV_CTRL_RGB_SCALE {
LCM_DEV_CTRL_RGB_SCALE_4096 = (0 << 24),
LCM_DEV_CTRL_RGB_SCALE_65536 = (1 << 24),
LCM_DEV_CTRL_RGB_SCALE_262144 = (2 << 24),
LCM_DEV_CTRL_RGB_SCALE_16777216 = (3 << 24),
};
enum LCM_DEV_CTRL_DBWORD {
LCM_DEV_CTRL_DBWORD_HALFWORD = (0 << 26),
LCM_DEV_CTRL_DBWORD_FULLWORD = (1 << 26),
};
enum LCM_DEV_CTRL_MPU68 {
LCM_DEV_CTRL_MPU68_80_SERIES = (0 << 27),
LCM_DEV_CTRL_MPU68_68_SERIES = (1 << 27),
};
enum LCM_DEV_CTRL_DE_POL {
LCM_DEV_CTRL_DE_POL_HIGH = (0 << 28),
LCM_DEV_CTRL_DE_POL_LOW = (1 << 28),
};
#define LCM_DEV_CTRL_CMD16 (29)
#define LCM_DEV_CTRL_CM16t18 (30)
#define LCM_DEV_CTRL_CMD_LOW (31)
/* MPU-Interface LCD Write Command */
#define REG_LCM_MPU_CMD (0x08)
/* Interrupt Control/Status Register */
#define REG_LCM_INT_CS (0x0c)
#define LCM_INT_CS_DISP_F_EN (1 << 0)
#define LCM_INT_CS_UNDERRUN_EN (1 << 1)
#define LCM_INT_CS_BUS_ERROR_INT (1 << 28)
#define LCM_INT_CS_UNDERRUN_INT (1 << 29)
#define LCM_INT_CS_DISP_F_STATUS (1 << 30)
#define LCM_INT_CS_DISP_F_INT (1 << 31)
/* CRTC Display Size Control Register */
#define REG_LCM_CRTC_SIZE (0x10)
#define LCM_CRTC_SIZE_VTTVAL(x) ((x) << 16)
#define LCM_CRTC_SIZE_HTTVAL(x) ((x) << 0)
/* CRTC Display Enable End */
#define REG_LCM_CRTC_DEND (0x14)
#define LCM_CRTC_DEND_VDENDVAL(x) ((x) << 16)
#define LCM_CRTC_DEND_HDENDVAL(x) ((x) << 0)
/* CRTC Internal Horizontal Retrace Control Register */
#define REG_LCM_CRTC_HR (0x18)
#define LCM_CRTC_HR_EVAL(x) ((x) << 16)
#define LCM_CRTC_HR_SVAL(x) ((x) << 0)
/* CRTC Horizontal Sync Control Register */
#define REG_LCM_CRTC_HSYNC (0x1C)
#define LCM_CRTC_HSYNC_SHIFTVAL(x) ((x) << 30)
#define LCM_CRTC_HSYNC_EVAL(x) ((x) << 16)
#define LCM_CRTC_HSYNC_SVAL(x) ((x) << 0)
/* CRTC Internal Vertical Retrace Control Register */
#define REG_LCM_CRTC_VR (0x20)
#define LCM_CRTC_VR_EVAL(x) ((x) << 16)
#define LCM_CRTC_VR_SVAL(x) ((x) << 0)
/* Video Stream Frame Buffer-0 Starting Address */
#define REG_LCM_VA_BADDR0 (0x24)
/* Video Stream Frame Buffer-1 Starting Address */
#define REG_LCM_VA_BADDR1 (0x28)
/* Video Stream Frame Buffer Control Register */
#define REG_LCM_VA_FBCTRL (0x2C)
#define LCM_VA_FBCTRL_IO_REGION_HALF (1 << 28)
#define LCM_VA_FBCTRL_FIELD_DUAL (1 << 29)
#define LCM_VA_FBCTRL_START_BUF (1 << 30)
#define LCM_VA_FBCTRL_DB_EN (1 << 31)
/* Video Stream Scaling Control Register */
#define REG_LCM_VA_SCALE (0x30)
#define LCM_VA_SCALE_XCOPY_INTERPOLATION (0 << 15)
#define LCM_VA_SCALE_XCOPY_DUPLICATION (1 << 15)
/* Image Stream Active Window Coordinates */
#define REG_LCM_VA_WIN (0x38)
/* Image Stream Stuff Pixel */
#define REG_LCM_VA_STUFF (0x3C)
/* OSD Window Starting Coordinates */
#define REG_LCM_OSD_WINS (0x40)
/* OSD Window Ending Coordinates */
#define REG_LCM_OSD_WINE (0x44)
/* OSD Stream Frame Buffer Starting Address */
#define REG_LCM_OSD_BADDR (0x48)
/* OSD Stream Frame Buffer Control Register */
#define REG_LCM_OSD_FBCTRL (0x4c)
/* OSD Overlay Control Register */
#define REG_LCM_OSD_OVERLAY (0x50)
/* OSD Overlay Color-Key Pattern Register */
#define REG_LCM_OSD_CKEY (0x54)
/* OSD Overlay Color-Key Mask Register */
#define REG_LCM_OSD_CMASK (0x58)
/* OSD Window Skip1 Register */
#define REG_LCM_OSD_SKIP1 (0x5C)
/* OSD Window Skip2 Register */
#define REG_LCM_OSD_SKIP2 (0x60)
/* OSD horizontal up scaling control register */
#define REG_LCM_OSD_SCALE (0x64)
/* MPU Vsync control register */
#define REG_LCM_MPU_VSYNC (0x68)
/* Hardware cursor control Register */
#define REG_LCM_HC_CTRL (0x6C)
/* Hardware cursot tip point potison on va picture */
#define REG_LCM_HC_POS (0x70)
/* Hardware Cursor Window Buffer Control Register */
#define REG_LCM_HC_WBCTRL (0x74)
/* Hardware cursor memory base address register */
#define REG_LCM_HC_BADDR (0x78)
/* Hardware cursor color ram register mapped to bpp = 0 */
#define REG_LCM_HC_COLOR0 (0x7C)
/* Hardware cursor color ram register mapped to bpp = 1 */
#define REG_LCM_HC_COLOR1 (0x80)
/* Hardware cursor color ram register mapped to bpp = 2 */
#define REG_LCM_HC_COLOR2 (0x84)
/* Hardware cursor color ram register mapped to bpp = 3 */
#define REG_LCM_HC_COLOR3 (0x88)
#endif /* __ASM_ARM_W90X900_REGS_LDM_H */

Просмотреть файл

@ -10,6 +10,8 @@
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation;version 2 of the License.
* history:
* Wang Qiang (rurality.linux@gmail.com) add LCD support
*
*/
@ -18,9 +20,51 @@
#include <asm/mach/map.h>
#include <asm/mach-types.h>
#include <mach/map.h>
#include <mach/regs-ldm.h>
#include <mach/fb.h>
#include "nuc950.h"
#ifdef CONFIG_FB_NUC900
/* LCD Controller */
static struct nuc900fb_display __initdata nuc950_lcd_info[] = {
/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
[0] = {
.type = LCM_DCCS_VA_SRC_RGB565,
.width = 320,
.height = 240,
.xres = 320,
.yres = 240,
.bpp = 16,
.pixclock = 200000,
.left_margin = 34,
.right_margin = 54,
.hsync_len = 10,
.upper_margin = 18,
.lower_margin = 4,
.vsync_len = 1,
.dccs = 0x8e00041a,
.devctl = 0x060800c0,
.fbctrl = 0x00a000a0,
.scale = 0x04000400,
},
};
static struct nuc900fb_mach_info nuc950_fb_info __initdata = {
#if defined(CONFIG_GPM1040A0_320X240)
.displays = &nuc950_lcd_info[0],
#else
.displays = nuc950_lcd_info,
#endif
.num_displays = ARRAY_SIZE(nuc950_lcd_info),
.default_display = 0,
.gpio_dir = 0x00000004,
.gpio_dir_mask = 0xFFFFFFFD,
.gpio_data = 0x00000004,
.gpio_data_mask = 0xFFFFFFFD,
};
#endif
static void __init nuc950evb_map_io(void)
{
nuc950_map_io();
@ -30,6 +74,9 @@ static void __init nuc950evb_map_io(void)
static void __init nuc950evb_init(void)
{
nuc950_board_init();
#ifdef CONFIG_FB_NUC900
nuc900_fb_set_platdata(&nuc950_fb_info);
#endif
}
MACHINE_START(W90P950EVB, "W90P950EVB")

Просмотреть файл

@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include "cpu.h"
/* define specific CPU platform device */
@ -25,6 +26,9 @@
static struct platform_device *nuc950_dev[] __initdata = {
&nuc900_device_kpi,
&nuc900_device_fmi,
#ifdef CONFIG_FB_NUC900
&nuc900_device_lcd,
#endif
};
/* define specific CPU platform io map */

Просмотреть файл

@ -1944,6 +1944,27 @@ config FB_S3C2410_DEBUG
Turn on debugging messages. Note that you can set/unset at run time
through sysfs
config FB_NUC900
bool "NUC900 LCD framebuffer support"
depends on FB && ARCH_W90X900
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
---help---
Frame buffer driver for the built-in LCD controller in the Nuvoton
NUC900 processor
config GPM1040A0_320X240
bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
depends on FB_NUC900
config FB_NUC900_DEBUG
bool "NUC900 lcd debug messages"
depends on FB_NUC900
help
Turn on debugging messages. Note that you can set/unset at run time
through sysfs
config FB_SM501
tristate "Silicon Motion SM501 framebuffer support"
depends on FB && MFD_SM501

Просмотреть файл

@ -129,6 +129,7 @@ obj-$(CONFIG_XEN_FBDEV_FRONTEND) += xen-fbfront.o
obj-$(CONFIG_FB_CARMINE) += carminefb.o
obj-$(CONFIG_FB_MB862XX) += mb862xx/
obj-$(CONFIG_FB_MSM) += msm/
obj-$(CONFIG_FB_NUC900) += nuc900fb.o
# Platform or fallback drivers go here
obj-$(CONFIG_FB_UVESA) += uvesafb.o

779
drivers/video/nuc900fb.c Normal file
Просмотреть файл

@ -0,0 +1,779 @@
/*
*
* Copyright (c) 2009 Nuvoton technology corporation
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Description:
* Nuvoton LCD Controller Driver
* Author:
* Wang Qiang (rurality.linux@gmail.com) 2009/12/11
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/wait.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/io.h>
#include <linux/pm.h>
#include <linux/device.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/regs-ldm.h>
#include <mach/fb.h>
#include <mach/clkdev.h>
#include "nuc900fb.h"
/*
* Initialize the nuc900 video (dual) buffer address
*/
static void nuc900fb_set_lcdaddr(struct fb_info *info)
{
struct nuc900fb_info *fbi = info->par;
void __iomem *regs = fbi->io;
unsigned long vbaddr1, vbaddr2;
vbaddr1 = info->fix.smem_start;
vbaddr2 = info->fix.smem_start;
vbaddr2 += info->fix.line_length * info->var.yres;
/* set frambuffer start phy addr*/
writel(vbaddr1, regs + REG_LCM_VA_BADDR0);
writel(vbaddr2, regs + REG_LCM_VA_BADDR1);
writel(fbi->regs.lcd_va_fbctrl, regs + REG_LCM_VA_FBCTRL);
writel(fbi->regs.lcd_va_scale, regs + REG_LCM_VA_SCALE);
}
/*
* calculate divider for lcd div
*/
static unsigned int nuc900fb_calc_pixclk(struct nuc900fb_info *fbi,
unsigned long pixclk)
{
unsigned long clk = fbi->clk_rate;
unsigned long long div;
/* pixclk is in picseconds. our clock is in Hz*/
/* div = (clk * pixclk)/10^12 */
div = (unsigned long long)clk * pixclk;
div >>= 12;
do_div(div, 625 * 625UL * 625);
dev_dbg(fbi->dev, "pixclk %ld, divisor is %lld\n", pixclk, div);
return div;
}
/*
* Check the video params of 'var'.
*/
static int nuc900fb_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct nuc900fb_info *fbi = info->par;
struct nuc900fb_mach_info *mach_info = fbi->dev->platform_data;
struct nuc900fb_display *display = NULL;
struct nuc900fb_display *default_display = mach_info->displays +
mach_info->default_display;
int i;
dev_dbg(fbi->dev, "check_var(var=%p, info=%p)\n", var, info);
/* validate x/y resolution */
/* choose default mode if possible */
if (var->xres == default_display->xres &&
var->yres == default_display->yres &&
var->bits_per_pixel == default_display->bpp)
display = default_display;
else
for (i = 0; i < mach_info->num_displays; i++)
if (var->xres == mach_info->displays[i].xres &&
var->yres == mach_info->displays[i].yres &&
var->bits_per_pixel == mach_info->displays[i].bpp) {
display = mach_info->displays + i;
break;
}
if (display == NULL) {
printk(KERN_ERR "wrong resolution or depth %dx%d at %d bit per pixel\n",
var->xres, var->yres, var->bits_per_pixel);
return -EINVAL;
}
/* it should be the same size as the display */
var->xres_virtual = display->xres;
var->yres_virtual = display->yres;
var->height = display->height;
var->width = display->width;
/* copy lcd settings */
var->pixclock = display->pixclock;
var->left_margin = display->left_margin;
var->right_margin = display->right_margin;
var->upper_margin = display->upper_margin;
var->lower_margin = display->lower_margin;
var->vsync_len = display->vsync_len;
var->hsync_len = display->hsync_len;
var->transp.offset = 0;
var->transp.length = 0;
fbi->regs.lcd_dccs = display->dccs;
fbi->regs.lcd_device_ctrl = display->devctl;
fbi->regs.lcd_va_fbctrl = display->fbctrl;
fbi->regs.lcd_va_scale = display->scale;
/* set R/G/B possions */
switch (var->bits_per_pixel) {
case 1:
case 2:
case 4:
case 8:
default:
var->red.offset = 0;
var->red.length = var->bits_per_pixel;
var->green = var->red;
var->blue = var->red;
break;
case 12:
var->red.length = 4;
var->green.length = 4;
var->blue.length = 4;
var->red.offset = 8;
var->green.offset = 4;
var->blue.offset = 0;
break;
case 16:
var->red.length = 5;
var->green.length = 6;
var->blue.length = 5;
var->red.offset = 11;
var->green.offset = 5;
var->blue.offset = 0;
break;
case 18:
var->red.length = 6;
var->green.length = 6;
var->blue.length = 6;
var->red.offset = 12;
var->green.offset = 6;
var->blue.offset = 0;
break;
case 32:
var->red.length = 8;
var->green.length = 8;
var->blue.length = 8;
var->red.offset = 16;
var->green.offset = 8;
var->blue.offset = 0;
break;
}
return 0;
}
/*
* Calculate lcd register values from var setting & save into hw
*/
static void nuc900fb_calculate_lcd_regs(const struct fb_info *info,
struct nuc900fb_hw *regs)
{
const struct fb_var_screeninfo *var = &info->var;
int vtt = var->height + var->upper_margin + var->lower_margin;
int htt = var->width + var->left_margin + var->right_margin;
int hsync = var->width + var->right_margin;
int vsync = var->height + var->lower_margin;
regs->lcd_crtc_size = LCM_CRTC_SIZE_VTTVAL(vtt) |
LCM_CRTC_SIZE_HTTVAL(htt);
regs->lcd_crtc_dend = LCM_CRTC_DEND_VDENDVAL(var->height) |
LCM_CRTC_DEND_HDENDVAL(var->width);
regs->lcd_crtc_hr = LCM_CRTC_HR_EVAL(var->width + 5) |
LCM_CRTC_HR_SVAL(var->width + 1);
regs->lcd_crtc_hsync = LCM_CRTC_HSYNC_EVAL(hsync + var->hsync_len) |
LCM_CRTC_HSYNC_SVAL(hsync);
regs->lcd_crtc_vr = LCM_CRTC_VR_EVAL(vsync + var->vsync_len) |
LCM_CRTC_VR_SVAL(vsync);
}
/*
* Activate (set) the controller from the given framebuffer
* information
*/
static void nuc900fb_activate_var(struct fb_info *info)
{
struct nuc900fb_info *fbi = info->par;
void __iomem *regs = fbi->io;
struct fb_var_screeninfo *var = &info->var;
int clkdiv;
clkdiv = nuc900fb_calc_pixclk(fbi, var->pixclock) - 1;
if (clkdiv < 0)
clkdiv = 0;
nuc900fb_calculate_lcd_regs(info, &fbi->regs);
/* set the new lcd registers*/
dev_dbg(fbi->dev, "new lcd register set:\n");
dev_dbg(fbi->dev, "dccs = 0x%08x\n", fbi->regs.lcd_dccs);
dev_dbg(fbi->dev, "dev_ctl = 0x%08x\n", fbi->regs.lcd_device_ctrl);
dev_dbg(fbi->dev, "crtc_size = 0x%08x\n", fbi->regs.lcd_crtc_size);
dev_dbg(fbi->dev, "crtc_dend = 0x%08x\n", fbi->regs.lcd_crtc_dend);
dev_dbg(fbi->dev, "crtc_hr = 0x%08x\n", fbi->regs.lcd_crtc_hr);
dev_dbg(fbi->dev, "crtc_hsync = 0x%08x\n", fbi->regs.lcd_crtc_hsync);
dev_dbg(fbi->dev, "crtc_vr = 0x%08x\n", fbi->regs.lcd_crtc_vr);
writel(fbi->regs.lcd_device_ctrl, regs + REG_LCM_DEV_CTRL);
writel(fbi->regs.lcd_crtc_size, regs + REG_LCM_CRTC_SIZE);
writel(fbi->regs.lcd_crtc_dend, regs + REG_LCM_CRTC_DEND);
writel(fbi->regs.lcd_crtc_hr, regs + REG_LCM_CRTC_HR);
writel(fbi->regs.lcd_crtc_hsync, regs + REG_LCM_CRTC_HSYNC);
writel(fbi->regs.lcd_crtc_vr, regs + REG_LCM_CRTC_VR);
/* set lcd address pointers */
nuc900fb_set_lcdaddr(info);
writel(fbi->regs.lcd_dccs, regs + REG_LCM_DCCS);
}
/*
* Alters the hardware state.
*
*/
static int nuc900fb_set_par(struct fb_info *info)
{
struct fb_var_screeninfo *var = &info->var;
switch (var->bits_per_pixel) {
case 32:
case 24:
case 18:
case 16:
case 12:
info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
case 1:
info->fix.visual = FB_VISUAL_MONO01;
break;
default:
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
break;
}
info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
/* activate this new configuration */
nuc900fb_activate_var(info);
return 0;
}
static inline unsigned int chan_to_field(unsigned int chan,
struct fb_bitfield *bf)
{
chan &= 0xffff;
chan >>= 16 - bf->length;
return chan << bf->offset;
}
static int nuc900fb_setcolreg(unsigned regno,
unsigned red, unsigned green, unsigned blue,
unsigned transp, struct fb_info *info)
{
unsigned int val;
switch (info->fix.visual) {
case FB_VISUAL_TRUECOLOR:
/* true-colour, use pseuo-palette */
if (regno < 16) {
u32 *pal = info->pseudo_palette;
val = chan_to_field(red, &info->var.red);
val |= chan_to_field(green, &info->var.green);
val |= chan_to_field(blue, &info->var.blue);
pal[regno] = val;
}
break;
default:
return 1; /* unknown type */
}
return 0;
}
/**
* nuc900fb_blank
*
*/
static int nuc900fb_blank(int blank_mode, struct fb_info *info)
{
return 0;
}
static struct fb_ops nuc900fb_ops = {
.owner = THIS_MODULE,
.fb_check_var = nuc900fb_check_var,
.fb_set_par = nuc900fb_set_par,
.fb_blank = nuc900fb_blank,
.fb_setcolreg = nuc900fb_setcolreg,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
};
static inline void modify_gpio(void __iomem *reg,
unsigned long set, unsigned long mask)
{
unsigned long tmp;
tmp = readl(reg) & ~mask;
writel(tmp | set, reg);
}
/*
* Initialise LCD-related registers
*/
static int nuc900fb_init_registers(struct fb_info *info)
{
struct nuc900fb_info *fbi = info->par;
struct nuc900fb_mach_info *mach_info = fbi->dev->platform_data;
void __iomem *regs = fbi->io;
/*reset the display engine*/
writel(0, regs + REG_LCM_DCCS);
writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_ENG_RST,
regs + REG_LCM_DCCS);
ndelay(100);
writel(readl(regs + REG_LCM_DCCS) & (~LCM_DCCS_ENG_RST),
regs + REG_LCM_DCCS);
ndelay(100);
writel(0, regs + REG_LCM_DEV_CTRL);
/* config gpio output */
modify_gpio(W90X900_VA_GPIO + 0x54, mach_info->gpio_dir,
mach_info->gpio_dir_mask);
modify_gpio(W90X900_VA_GPIO + 0x58, mach_info->gpio_data,
mach_info->gpio_data_mask);
return 0;
}
/*
* Alloc the SDRAM region of NUC900 for the frame buffer.
* The buffer should be a non-cached, non-buffered, memory region
* to allow palette and pixel writes without flushing the cache.
*/
static int __init nuc900fb_map_video_memory(struct fb_info *info)
{
struct nuc900fb_info *fbi = info->par;
dma_addr_t map_dma;
unsigned long map_size = PAGE_ALIGN(info->fix.smem_len);
dev_dbg(fbi->dev, "nuc900fb_map_video_memory(fbi=%p) map_size %lu\n",
fbi, map_size);
info->screen_base = dma_alloc_writecombine(fbi->dev, map_size,
&map_dma, GFP_KERNEL);
if (!info->screen_base)
return -ENOMEM;
memset(info->screen_base, 0x00, map_size);
info->fix.smem_start = map_dma;
return 0;
}
static inline void nuc900fb_unmap_video_memory(struct fb_info *info)
{
struct nuc900fb_info *fbi = info->par;
dma_free_writecombine(fbi->dev, PAGE_ALIGN(info->fix.smem_len),
info->screen_base, info->fix.smem_start);
}
static irqreturn_t nuc900fb_irqhandler(int irq, void *dev_id)
{
struct nuc900fb_info *fbi = dev_id;
void __iomem *regs = fbi->io;
void __iomem *irq_base = fbi->irq_base;
unsigned long lcdirq = readl(regs + REG_LCM_INT_CS);
if (lcdirq & LCM_INT_CS_DISP_F_STATUS) {
writel(readl(irq_base) | 1<<30, irq_base);
/* wait VA_EN low */
if ((readl(regs + REG_LCM_DCCS) &
LCM_DCCS_SINGLE) == LCM_DCCS_SINGLE)
while ((readl(regs + REG_LCM_DCCS) &
LCM_DCCS_VA_EN) == LCM_DCCS_VA_EN)
;
/* display_out-enable */
writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_DISP_OUT_EN,
regs + REG_LCM_DCCS);
/* va-enable*/
writel(readl(regs + REG_LCM_DCCS) | LCM_DCCS_VA_EN,
regs + REG_LCM_DCCS);
} else if (lcdirq & LCM_INT_CS_UNDERRUN_INT) {
writel(readl(irq_base) | LCM_INT_CS_UNDERRUN_INT, irq_base);
} else if (lcdirq & LCM_INT_CS_BUS_ERROR_INT) {
writel(readl(irq_base) | LCM_INT_CS_BUS_ERROR_INT, irq_base);
}
return IRQ_HANDLED;
}
#ifdef CONFIG_CPU_FREQ
static int nuc900fb_cpufreq_transition(struct notifier_block *nb,
unsigned long val, void *data)
{
struct nuc900fb_info *info;
struct fb_info *fbinfo;
long delta_f;
info = container_of(nb, struct nuc900fb_info, freq_transition);
fbinfo = platform_get_drvdata(to_platform_device(info->dev));
delta_f = info->clk_rate - clk_get_rate(info->clk);
if ((val == CPUFREQ_POSTCHANGE && delta_f > 0) ||
(val == CPUFREQ_PRECHANGE && delta_f < 0)) {
info->clk_rate = clk_get_rate(info->clk);
nuc900fb_activate_var(fbinfo);
}
return 0;
}
static inline int nuc900fb_cpufreq_register(struct nuc900fb_info *fbi)
{
fbi->freq_transition.notifier_call = nuc900fb_cpufreq_transition;
return cpufreq_register_notifier(&fbi->freq_transition,
CPUFREQ_TRANSITION_NOTIFIER);
}
static inline void nuc900fb_cpufreq_deregister(struct nuc900fb_info *fbi)
{
cpufreq_unregister_notifier(&fbi->freq_transition,
CPUFREQ_TRANSITION_NOTIFIER);
}
#else
static inline int nuc900fb_cpufreq_transition(struct notifier_block *nb,
unsigned long val, void *data)
{
return 0;
}
static inline int nuc900fb_cpufreq_register(struct nuc900fb_info *fbi)
{
return 0;
}
static inline void nuc900fb_cpufreq_deregister(struct nuc900fb_info *info)
{
}
#endif
static char driver_name[] = "nuc900fb";
static int __devinit nuc900fb_probe(struct platform_device *pdev)
{
struct nuc900fb_info *fbi;
struct nuc900fb_display *display;
struct fb_info *fbinfo;
struct nuc900fb_mach_info *mach_info;
struct resource *res;
int ret;
int irq;
int i;
int size;
dev_dbg(&pdev->dev, "devinit\n");
mach_info = pdev->dev.platform_data;
if (mach_info == NULL) {
dev_err(&pdev->dev,
"no platform data for lcd, cannot attach\n");
return -EINVAL;
}
if (mach_info->default_display > mach_info->num_displays) {
dev_err(&pdev->dev,
"default display No. is %d but only %d displays \n",
mach_info->default_display, mach_info->num_displays);
return -EINVAL;
}
display = mach_info->displays + mach_info->default_display;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "no irq for device\n");
return -ENOENT;
}
fbinfo = framebuffer_alloc(sizeof(struct nuc900fb_info), &pdev->dev);
if (!fbinfo)
return -ENOMEM;
platform_set_drvdata(pdev, fbinfo);
fbi = fbinfo->par;
fbi->dev = &pdev->dev;
#ifdef CONFIG_CPU_NUC950
fbi->drv_type = LCDDRV_NUC950;
#endif
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
size = (res->end - res->start) + 1;
fbi->mem = request_mem_region(res->start, size, pdev->name);
if (fbi->mem == NULL) {
dev_err(&pdev->dev, "failed to alloc memory region\n");
ret = -ENOENT;
goto free_fb;
}
fbi->io = ioremap(res->start, size);
if (fbi->io == NULL) {
dev_err(&pdev->dev, "ioremap() of lcd registers failed\n");
ret = -ENXIO;
goto release_mem_region;
}
fbi->irq_base = fbi->io + REG_LCM_INT_CS;
/* Stop the LCD */
writel(0, fbi->io + REG_LCM_DCCS);
/* fill the fbinfo*/
strcpy(fbinfo->fix.id, driver_name);
fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
fbinfo->fix.type_aux = 0;
fbinfo->fix.xpanstep = 0;
fbinfo->fix.ypanstep = 0;
fbinfo->fix.ywrapstep = 0;
fbinfo->fix.accel = FB_ACCEL_NONE;
fbinfo->var.nonstd = 0;
fbinfo->var.activate = FB_ACTIVATE_NOW;
fbinfo->var.accel_flags = 0;
fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
fbinfo->fbops = &nuc900fb_ops;
fbinfo->flags = FBINFO_FLAG_DEFAULT;
fbinfo->pseudo_palette = &fbi->pseudo_pal;
ret = request_irq(irq, nuc900fb_irqhandler, IRQF_DISABLED,
pdev->name, fbinfo);
if (ret) {
dev_err(&pdev->dev, "cannot register irq handler %d -err %d\n",
irq, ret);
ret = -EBUSY;
goto release_regs;
}
nuc900_driver_clksrc_div(&pdev->dev, "ext", 0x2);
fbi->clk = clk_get(&pdev->dev, NULL);
if (!fbi->clk || IS_ERR(fbi->clk)) {
printk(KERN_ERR "nuc900-lcd:failed to get lcd clock source\n");
ret = -ENOENT;
goto release_irq;
}
clk_enable(fbi->clk);
dev_dbg(&pdev->dev, "got and enabled clock\n");
fbi->clk_rate = clk_get_rate(fbi->clk);
/* calutate the video buffer size */
for (i = 0; i < mach_info->num_displays; i++) {
unsigned long smem_len = mach_info->displays[i].xres;
smem_len *= mach_info->displays[i].yres;
smem_len *= mach_info->displays[i].bpp;
smem_len >>= 3;
if (fbinfo->fix.smem_len < smem_len)
fbinfo->fix.smem_len = smem_len;
}
/* Initialize Video Memory */
ret = nuc900fb_map_video_memory(fbinfo);
if (ret) {
printk(KERN_ERR "Failed to allocate video RAM: %x\n", ret);
goto release_clock;
}
dev_dbg(&pdev->dev, "got video memory\n");
fbinfo->var.xres = display->xres;
fbinfo->var.yres = display->yres;
fbinfo->var.bits_per_pixel = display->bpp;
nuc900fb_init_registers(fbinfo);
nuc900fb_check_var(&fbinfo->var, fbinfo);
ret = nuc900fb_cpufreq_register(fbi);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to register cpufreq\n");
goto free_video_memory;
}
ret = register_framebuffer(fbinfo);
if (ret) {
printk(KERN_ERR "failed to register framebuffer device: %d\n",
ret);
goto free_cpufreq;
}
printk(KERN_INFO "fb%d: %s frame buffer device\n",
fbinfo->node, fbinfo->fix.id);
return 0;
free_cpufreq:
nuc900fb_cpufreq_deregister(fbi);
free_video_memory:
nuc900fb_unmap_video_memory(fbinfo);
release_clock:
clk_disable(fbi->clk);
clk_put(fbi->clk);
release_irq:
free_irq(irq, fbi);
release_regs:
iounmap(fbi->io);
release_mem_region:
release_mem_region((unsigned long)fbi->mem, size);
free_fb:
framebuffer_release(fbinfo);
return ret;
}
/*
* shutdown the lcd controller
*/
static void nuc900fb_stop_lcd(struct fb_info *info)
{
struct nuc900fb_info *fbi = info->par;
void __iomem *regs = fbi->io;
writel((~LCM_DCCS_DISP_INT_EN) | (~LCM_DCCS_VA_EN) | (~LCM_DCCS_OSD_EN),
regs + REG_LCM_DCCS);
}
/*
* Cleanup
*/
static int nuc900fb_remove(struct platform_device *pdev)
{
struct fb_info *fbinfo = platform_get_drvdata(pdev);
struct nuc900fb_info *fbi = fbinfo->par;
int irq;
nuc900fb_stop_lcd(fbinfo);
msleep(1);
nuc900fb_unmap_video_memory(fbinfo);
iounmap(fbi->io);
irq = platform_get_irq(pdev, 0);
free_irq(irq, fbi);
release_resource(fbi->mem);
kfree(fbi->mem);
platform_set_drvdata(pdev, NULL);
framebuffer_release(fbinfo);
return 0;
}
#ifdef CONFIG_PM
/*
* suspend and resume support for the lcd controller
*/
static int nuc900fb_suspend(struct platform_device *dev, pm_message_t state)
{
struct fb_info *fbinfo = platform_get_drvdata(dev);
struct nuc900fb_info *info = fbinfo->par;
nuc900fb_stop_lcd();
msleep(1);
clk_disable(info->clk);
return 0;
}
static int nuc900fb_resume(struct platform_device *dev)
{
struct fb_info *fbinfo = platform_get_drvdata(dev);
struct nuc900fb_info *fbi = fbinfo->par;
printk(KERN_INFO "nuc900fb resume\n");
clk_enable(fbi->clk);
msleep(1);
nuc900fb_init_registers(fbinfo);
nuc900fb_activate_var(bfinfo);
return 0;
}
#else
#define nuc900fb_suspend NULL
#define nuc900fb_resume NULL
#endif
static struct platform_driver nuc900fb_driver = {
.probe = nuc900fb_probe,
.remove = nuc900fb_remove,
.suspend = nuc900fb_suspend,
.resume = nuc900fb_resume,
.driver = {
.name = "nuc900-lcd",
.owner = THIS_MODULE,
},
};
int __devinit nuc900fb_init(void)
{
return platform_driver_register(&nuc900fb_driver);
}
static void __exit nuc900fb_cleanup(void)
{
platform_driver_unregister(&nuc900fb_driver);
}
module_init(nuc900fb_init);
module_exit(nuc900fb_cleanup);
MODULE_DESCRIPTION("Framebuffer driver for the NUC900");
MODULE_LICENSE("GPL");

55
drivers/video/nuc900fb.h Normal file
Просмотреть файл

@ -0,0 +1,55 @@
/*
*
* Copyright (c) 2009 Nuvoton technology corporation
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Auther:
* Wang Qiang(rurality.linux@gmail.com) 2009/12/16
*/
#ifndef __NUC900FB_H
#define __NUC900FB_H
#include <mach/map.h>
#include <mach/fb.h>
enum nuc900_lcddrv_type {
LCDDRV_NUC910,
LCDDRV_NUC930,
LCDDRV_NUC932,
LCDDRV_NUC950,
LCDDRV_NUC960,
};
#define PALETTE_BUFFER_SIZE 256
#define PALETTE_BUFF_CLEAR (0x80000000) /* entry is clear/invalid */
struct nuc900fb_info {
struct device *dev;
struct clk *clk;
struct resource *mem;
void __iomem *io;
void __iomem *irq_base;
int drv_type;
struct nuc900fb_hw regs;
unsigned long clk_rate;
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
#endif
/* keep these registers in case we need to re-write palette */
u32 palette_buffer[PALETTE_BUFFER_SIZE];
u32 pseudo_pal[16];
};
int nuc900fb_init(void);
#endif /* __NUC900FB_H */