drm/panel: Add Innolux EJ030NA 3.0" 320x480 panel
Add support for the Innolux/Chimei EJ030NA 3.0" 320x480 TFT panel. This panel can be found in the LDKs, RS97 V2.1 and RG300 (non IPS) handheld gaming consoles. While being 320x480, it is actually a horizontal 4:3 panel with non-square pixels in delta arrangement. Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210625121045.81711-2-paul@crapouillou.net
This commit is contained in:
Christophe Branchereau
Paul Cercueil
Родитель
1333adfcc3
Коммит
868d043f05
|
|
@ -134,6 +134,15 @@ config DRM_PANEL_ILITEK_ILI9881C
|
|||
Say Y if you want to enable support for panels based on the
|
||||
Ilitek ILI9881c controller.
|
||||
|
||||
config DRM_PANEL_INNOLUX_EJ030NA
|
||||
tristate "Innolux EJ030NA 320x480 LCD panel"
|
||||
depends on OF && SPI
|
||||
select REGMAP_SPI
|
||||
help
|
||||
Say Y here to enable support for the Innolux/Chimei EJ030NA
|
||||
320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
|
||||
and LDK handheld gaming consoles.
|
||||
|
||||
config DRM_PANEL_INNOLUX_P079ZCA
|
||||
tristate "Innolux P079ZCA panel"
|
||||
depends on OF
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02) += panel-feixin-k101-im2ba02.o
|
|||
obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
|
||||
obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
|
||||
obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
|
||||
obj-$(CONFIG_DRM_PANEL_INNOLUX_EJ030NA) += panel-innolux-ej030na.o
|
||||
obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
|
||||
obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
|
||||
obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,289 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Innolux/Chimei EJ030NA TFT LCD panel driver
|
||||
*
|
||||
* Copyright (C) 2020, Paul Cercueil <paul@crapouillou.net>
|
||||
* Copyright (C) 2020, Christophe Branchereau <cbranchereau@gmail.com>
|
||||
*/
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/media-bus-format.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#include <drm/drm_modes.h>
|
||||
#include <drm/drm_panel.h>
|
||||
|
||||
struct ej030na_info {
|
||||
const struct drm_display_mode *display_modes;
|
||||
unsigned int num_modes;
|
||||
u16 width_mm, height_mm;
|
||||
u32 bus_format, bus_flags;
|
||||
};
|
||||
|
||||
struct ej030na {
|
||||
struct drm_panel panel;
|
||||
struct spi_device *spi;
|
||||
struct regmap *map;
|
||||
|
||||
const struct ej030na_info *panel_info;
|
||||
|
||||
struct regulator *supply;
|
||||
struct gpio_desc *reset_gpio;
|
||||
};
|
||||
|
||||
static inline struct ej030na *to_ej030na(struct drm_panel *panel)
|
||||
{
|
||||
return container_of(panel, struct ej030na, panel);
|
||||
}
|
||||
|
||||
static const struct reg_sequence ej030na_init_sequence[] = {
|
||||
{ 0x05, 0x1e },
|
||||
{ 0x05, 0x5c },
|
||||
{ 0x02, 0x14 },
|
||||
{ 0x03, 0x40 },
|
||||
{ 0x04, 0x07 },
|
||||
{ 0x06, 0x12 },
|
||||
{ 0x07, 0xd2 },
|
||||
{ 0x0c, 0x06 },
|
||||
{ 0x0d, 0x40 },
|
||||
{ 0x0e, 0x40 },
|
||||
{ 0x0f, 0x40 },
|
||||
{ 0x10, 0x40 },
|
||||
{ 0x11, 0x40 },
|
||||
{ 0x2f, 0x40 },
|
||||
{ 0x5a, 0x02 },
|
||||
|
||||
{ 0x30, 0x07 },
|
||||
{ 0x31, 0x57 },
|
||||
{ 0x32, 0x53 },
|
||||
{ 0x33, 0x77 },
|
||||
{ 0x34, 0xb8 },
|
||||
{ 0x35, 0xbd },
|
||||
{ 0x36, 0xb8 },
|
||||
{ 0x37, 0xe7 },
|
||||
{ 0x38, 0x04 },
|
||||
{ 0x39, 0xff },
|
||||
|
||||
{ 0x40, 0x0b },
|
||||
{ 0x41, 0xb8 },
|
||||
{ 0x42, 0xab },
|
||||
{ 0x43, 0xb9 },
|
||||
{ 0x44, 0x6a },
|
||||
{ 0x45, 0x56 },
|
||||
{ 0x46, 0x61 },
|
||||
{ 0x47, 0x08 },
|
||||
{ 0x48, 0x0f },
|
||||
{ 0x49, 0x0f },
|
||||
|
||||
{ 0x2b, 0x01 },
|
||||
};
|
||||
|
||||
static int ej030na_prepare(struct drm_panel *panel)
|
||||
{
|
||||
struct ej030na *priv = to_ej030na(panel);
|
||||
struct device *dev = &priv->spi->dev;
|
||||
int err;
|
||||
|
||||
err = regulator_enable(priv->supply);
|
||||
if (err) {
|
||||
dev_err(dev, "Failed to enable power supply: %d\n", err);
|
||||
return err;
|
||||
}
|
||||
|
||||
/* Reset the chip */
|
||||
gpiod_set_value_cansleep(priv->reset_gpio, 1);
|
||||
usleep_range(50, 150);
|
||||
gpiod_set_value_cansleep(priv->reset_gpio, 0);
|
||||
usleep_range(50, 150);
|
||||
|
||||
err = regmap_multi_reg_write(priv->map, ej030na_init_sequence,
|
||||
ARRAY_SIZE(ej030na_init_sequence));
|
||||
if (err) {
|
||||
dev_err(dev, "Failed to init registers: %d\n", err);
|
||||
goto err_disable_regulator;
|
||||
}
|
||||
|
||||
msleep(120);
|
||||
|
||||
return 0;
|
||||
|
||||
err_disable_regulator:
|
||||
regulator_disable(priv->supply);
|
||||
return err;
|
||||
}
|
||||
|
||||
static int ej030na_unprepare(struct drm_panel *panel)
|
||||
{
|
||||
struct ej030na *priv = to_ej030na(panel);
|
||||
|
||||
gpiod_set_value_cansleep(priv->reset_gpio, 1);
|
||||
regulator_disable(priv->supply);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ej030na_get_modes(struct drm_panel *panel,
|
||||
struct drm_connector *connector)
|
||||
{
|
||||
struct ej030na *priv = to_ej030na(panel);
|
||||
const struct ej030na_info *panel_info = priv->panel_info;
|
||||
struct drm_display_mode *mode;
|
||||
unsigned int i;
|
||||
|
||||
for (i = 0; i < panel_info->num_modes; i++) {
|
||||
mode = drm_mode_duplicate(connector->dev,
|
||||
&panel_info->display_modes[i]);
|
||||
if (!mode)
|
||||
return -ENOMEM;
|
||||
|
||||
drm_mode_set_name(mode);
|
||||
|
||||
mode->type = DRM_MODE_TYPE_DRIVER;
|
||||
if (panel_info->num_modes == 1)
|
||||
mode->type |= DRM_MODE_TYPE_PREFERRED;
|
||||
|
||||
drm_mode_probed_add(connector, mode);
|
||||
}
|
||||
|
||||
connector->display_info.bpc = 8;
|
||||
connector->display_info.width_mm = panel_info->width_mm;
|
||||
connector->display_info.height_mm = panel_info->height_mm;
|
||||
|
||||
drm_display_info_set_bus_formats(&connector->display_info,
|
||||
&panel_info->bus_format, 1);
|
||||
connector->display_info.bus_flags = panel_info->bus_flags;
|
||||
|
||||
return panel_info->num_modes;
|
||||
}
|
||||
|
||||
static const struct drm_panel_funcs ej030na_funcs = {
|
||||
.prepare = ej030na_prepare,
|
||||
.unprepare = ej030na_unprepare,
|
||||
.get_modes = ej030na_get_modes,
|
||||
};
|
||||
|
||||
static const struct regmap_config ej030na_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.max_register = 0x5a,
|
||||
};
|
||||
|
||||
static int ej030na_probe(struct spi_device *spi)
|
||||
{
|
||||
struct device *dev = &spi->dev;
|
||||
struct ej030na *priv;
|
||||
int err;
|
||||
|
||||
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
priv->spi = spi;
|
||||
spi_set_drvdata(spi, priv);
|
||||
|
||||
priv->map = devm_regmap_init_spi(spi, &ej030na_regmap_config);
|
||||
if (IS_ERR(priv->map)) {
|
||||
dev_err(dev, "Unable to init regmap\n");
|
||||
return PTR_ERR(priv->map);
|
||||
}
|
||||
|
||||
priv->panel_info = of_device_get_match_data(dev);
|
||||
if (!priv->panel_info)
|
||||
return -EINVAL;
|
||||
|
||||
priv->supply = devm_regulator_get(dev, "power");
|
||||
if (IS_ERR(priv->supply)) {
|
||||
dev_err(dev, "Failed to get power supply\n");
|
||||
return PTR_ERR(priv->supply);
|
||||
}
|
||||
|
||||
priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(priv->reset_gpio)) {
|
||||
dev_err(dev, "Failed to get reset GPIO\n");
|
||||
return PTR_ERR(priv->reset_gpio);
|
||||
}
|
||||
|
||||
drm_panel_init(&priv->panel, dev, &ej030na_funcs,
|
||||
DRM_MODE_CONNECTOR_DPI);
|
||||
|
||||
err = drm_panel_of_backlight(&priv->panel);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
drm_panel_add(&priv->panel);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ej030na_remove(struct spi_device *spi)
|
||||
{
|
||||
struct ej030na *priv = spi_get_drvdata(spi);
|
||||
|
||||
drm_panel_remove(&priv->panel);
|
||||
drm_panel_disable(&priv->panel);
|
||||
drm_panel_unprepare(&priv->panel);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct drm_display_mode ej030na_modes[] = {
|
||||
{ /* 60 Hz */
|
||||
.clock = 14400,
|
||||
.hdisplay = 320,
|
||||
.hsync_start = 320 + 10,
|
||||
.hsync_end = 320 + 10 + 37,
|
||||
.htotal = 320 + 10 + 37 + 33,
|
||||
.vdisplay = 480,
|
||||
.vsync_start = 480 + 102,
|
||||
.vsync_end = 480 + 102 + 9 + 9,
|
||||
.vtotal = 480 + 102 + 9 + 9,
|
||||
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
|
||||
},
|
||||
{ /* 50 Hz */
|
||||
.clock = 12000,
|
||||
.hdisplay = 320,
|
||||
.hsync_start = 320 + 10,
|
||||
.hsync_end = 320 + 10 + 37,
|
||||
.htotal = 320 + 10 + 37 + 33,
|
||||
.vdisplay = 480,
|
||||
.vsync_start = 480 + 102,
|
||||
.vsync_end = 480 + 102 + 9,
|
||||
.vtotal = 480 + 102 + 9 + 9,
|
||||
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct ej030na_info ej030na_info = {
|
||||
.display_modes = ej030na_modes,
|
||||
.num_modes = ARRAY_SIZE(ej030na_modes),
|
||||
.width_mm = 70,
|
||||
.height_mm = 51,
|
||||
.bus_format = MEDIA_BUS_FMT_RGB888_3X8_DELTA,
|
||||
.bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE | DRM_BUS_FLAG_DE_LOW,
|
||||
};
|
||||
|
||||
static const struct of_device_id ej030na_of_match[] = {
|
||||
{ .compatible = "innolux,ej030na", .data = &ej030na_info },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ej030na_of_match);
|
||||
|
||||
static struct spi_driver ej030na_driver = {
|
||||
.driver = {
|
||||
.name = "panel-innolux-ej030na",
|
||||
.of_match_table = ej030na_of_match,
|
||||
},
|
||||
.probe = ej030na_probe,
|
||||
.remove = ej030na_remove,
|
||||
};
|
||||
module_spi_driver(ej030na_driver);
|
||||
|
||||
MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
|
||||
MODULE_AUTHOR("Christophe Branchereau <cbranchereau@gmail.com>");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Загрузка…
Ссылка в новой задаче