diff --git a/arch/ppc64/oprofile/common.c b/arch/powerpc/oprofile/common.c similarity index 56% rename from arch/ppc64/oprofile/common.c rename to arch/powerpc/oprofile/common.c index ff9361a07d39..486314a0defd 100644 --- a/arch/ppc64/oprofile/common.c +++ b/arch/powerpc/oprofile/common.c @@ -1,5 +1,9 @@ /* + * PPC 64 oprofile support: * Copyright (C) 2004 Anton Blanchard , IBM + * PPC 32 oprofile support: (based on PPC 64 support) + * Copyright (C) Freescale Semiconductor, Inc 2004 + * Author: Andy Fleming * * Based on alpha version. * @@ -10,12 +14,19 @@ */ #include +#ifndef __powerpc64__ +#include +#endif /* ! __powerpc64__ */ #include #include #include #include #include +#ifdef __powerpc64__ #include +#else /* __powerpc64__ */ +#include +#endif /* __powerpc64__ */ #include #include @@ -24,59 +35,84 @@ static struct op_powerpc_model *model; static struct op_counter_config ctr[OP_MAX_COUNTER]; static struct op_system_config sys; +#ifndef __powerpc64__ +static char *cpu_type; +#endif /* ! __powerpc64__ */ + static void op_handle_interrupt(struct pt_regs *regs) { model->handle_interrupt(regs, ctr); } -static int op_ppc64_setup(void) +static int op_powerpc_setup(void) { +#ifdef __powerpc64__ int err; /* Grab the hardware */ err = reserve_pmc_hardware(op_handle_interrupt); if (err) return err; +#else /* __powerpc64__ */ + /* Install our interrupt handler into the existing hook. */ + if (request_perfmon_irq(&op_handle_interrupt)) + return -EBUSY; + mb(); +#endif /* __powerpc64__ */ /* Pre-compute the values to stuff in the hardware registers. */ model->reg_setup(ctr, &sys, model->num_counters); /* Configure the registers on all cpus. */ +#ifdef __powerpc64__ on_each_cpu(model->cpu_setup, NULL, 0, 1); +#else /* __powerpc64__ */ +#if 0 + /* FIXME: Make multi-cpu work */ + on_each_cpu(model->reg_setup, NULL, 0, 1); +#endif +#endif /* __powerpc64__ */ return 0; } -static void op_ppc64_shutdown(void) +static void op_powerpc_shutdown(void) { +#ifdef __powerpc64__ release_pmc_hardware(); +#else /* __powerpc64__ */ + mb(); + /* Remove our interrupt handler. We may be removing this module. */ + free_perfmon_irq(); +#endif /* __powerpc64__ */ } -static void op_ppc64_cpu_start(void *dummy) +static void op_powerpc_cpu_start(void *dummy) { model->start(ctr); } -static int op_ppc64_start(void) +static int op_powerpc_start(void) { - on_each_cpu(op_ppc64_cpu_start, NULL, 0, 1); + on_each_cpu(op_powerpc_cpu_start, NULL, 0, 1); return 0; } -static inline void op_ppc64_cpu_stop(void *dummy) +static inline void op_powerpc_cpu_stop(void *dummy) { model->stop(); } -static void op_ppc64_stop(void) +static void op_powerpc_stop(void) { - on_each_cpu(op_ppc64_cpu_stop, NULL, 0, 1); + on_each_cpu(op_powerpc_cpu_stop, NULL, 0, 1); } -static int op_ppc64_create_files(struct super_block *sb, struct dentry *root) +static int op_powerpc_create_files(struct super_block *sb, struct dentry *root) { int i; +#ifdef __powerpc64__ /* * There is one mmcr0, mmcr1 and mmcra for setting the events for * all of the counters. @@ -84,6 +120,7 @@ static int op_ppc64_create_files(struct super_block *sb, struct dentry *root) oprofilefs_create_ulong(sb, root, "mmcr0", &sys.mmcr0); oprofilefs_create_ulong(sb, root, "mmcr1", &sys.mmcr1); oprofilefs_create_ulong(sb, root, "mmcra", &sys.mmcra); +#endif /* __powerpc64__ */ for (i = 0; i < model->num_counters; ++i) { struct dentry *dir; @@ -95,44 +132,72 @@ static int op_ppc64_create_files(struct super_block *sb, struct dentry *root) oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled); oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event); oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count); +#ifdef __powerpc64__ /* * We dont support per counter user/kernel selection, but * we leave the entries because userspace expects them */ +#endif /* __powerpc64__ */ oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel); oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user); + +#ifndef __powerpc64__ + /* FIXME: Not sure if this is used */ +#endif /* ! __powerpc64__ */ oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask); } oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel); oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user); +#ifdef __powerpc64__ oprofilefs_create_ulong(sb, root, "backtrace_spinlocks", &sys.backtrace_spinlocks); +#endif /* __powerpc64__ */ /* Default to tracing both kernel and user */ sys.enable_kernel = 1; sys.enable_user = 1; - +#ifdef __powerpc64__ /* Turn on backtracing through spinlocks by default */ sys.backtrace_spinlocks = 1; +#endif /* __powerpc64__ */ return 0; } int __init oprofile_arch_init(struct oprofile_operations *ops) { +#ifndef __powerpc64__ + int cpu_id = smp_processor_id(); + +#ifdef CONFIG_FSL_BOOKE + model = &op_model_fsl_booke; +#else + return -ENODEV; +#endif + + cpu_type = kmalloc(32, GFP_KERNEL); + if (NULL == cpu_type) + return -ENOMEM; + + sprintf(cpu_type, "ppc/%s", cur_cpu_spec[cpu_id]->cpu_name); + + model->num_counters = cur_cpu_spec[cpu_id]->num_pmcs; + + ops->cpu_type = cpu_type; +#else /* __powerpc64__ */ if (!cur_cpu_spec->oprofile_model || !cur_cpu_spec->oprofile_cpu_type) return -ENODEV; - model = cur_cpu_spec->oprofile_model; model->num_counters = cur_cpu_spec->num_pmcs; ops->cpu_type = cur_cpu_spec->oprofile_cpu_type; - ops->create_files = op_ppc64_create_files; - ops->setup = op_ppc64_setup; - ops->shutdown = op_ppc64_shutdown; - ops->start = op_ppc64_start; - ops->stop = op_ppc64_stop; +#endif /* __powerpc64__ */ + ops->create_files = op_powerpc_create_files; + ops->setup = op_powerpc_setup; + ops->shutdown = op_powerpc_shutdown; + ops->start = op_powerpc_start; + ops->stop = op_powerpc_stop; printk(KERN_INFO "oprofile: using %s performance monitoring.\n", ops->cpu_type); @@ -142,4 +207,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) void oprofile_arch_exit(void) { +#ifndef __powerpc64__ + kfree(cpu_type); + cpu_type = NULL; +#endif /* ! __powerpc64__ */ } diff --git a/arch/ppc/oprofile/op_model_fsl_booke.c b/arch/powerpc/oprofile/op_model_fsl_booke.c similarity index 100% rename from arch/ppc/oprofile/op_model_fsl_booke.c rename to arch/powerpc/oprofile/op_model_fsl_booke.c diff --git a/arch/ppc64/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c similarity index 100% rename from arch/ppc64/oprofile/op_model_power4.c rename to arch/powerpc/oprofile/op_model_power4.c diff --git a/arch/ppc64/oprofile/op_model_rs64.c b/arch/powerpc/oprofile/op_model_rs64.c similarity index 100% rename from arch/ppc64/oprofile/op_model_rs64.c rename to arch/powerpc/oprofile/op_model_rs64.c diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index 16e2675f3270..90c750227ed9 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -71,7 +71,7 @@ drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/ drivers-$(CONFIG_4xx) += arch/ppc/4xx_io/ drivers-$(CONFIG_CPM2) += arch/ppc/8260_io/ -drivers-$(CONFIG_OPROFILE) += arch/ppc/oprofile/ +drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm diff --git a/arch/ppc/oprofile/Makefile b/arch/ppc/oprofile/Makefile deleted file mode 100644 index 4bf75b776c5b..000000000000 --- a/arch/ppc/oprofile/Makefile +++ /dev/null @@ -1 +0,0 @@ -include arch/powerpc/oprofile/Makefile diff --git a/arch/ppc/oprofile/common.c b/arch/ppc/oprofile/common.c deleted file mode 100644 index f63bee23f20c..000000000000 --- a/arch/ppc/oprofile/common.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * PPC 32 oprofile support - * Based on PPC64 oprofile support - * Copyright (C) 2004 Anton Blanchard , IBM - * - * Copyright (C) Freescale Semiconductor, Inc 2004 - * - * Author: Andy Fleming - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static struct op_powerpc_model *model; - -static struct op_counter_config ctr[OP_MAX_COUNTER]; -static struct op_system_config sys; - -static void op_handle_interrupt(struct pt_regs *regs) -{ - model->handle_interrupt(regs, ctr); -} - -static int op_ppc32_setup(void) -{ - /* Install our interrupt handler into the existing hook. */ - if(request_perfmon_irq(&op_handle_interrupt)) - return -EBUSY; - - mb(); - - /* Pre-compute the values to stuff in the hardware registers. */ - model->reg_setup(ctr, &sys, model->num_counters); - -#if 0 - /* FIXME: Make multi-cpu work */ - /* Configure the registers on all cpus. */ - on_each_cpu(model->reg_setup, NULL, 0, 1); -#endif - - return 0; -} - -static void op_ppc32_shutdown(void) -{ - mb(); - - /* Remove our interrupt handler. We may be removing this module. */ - free_perfmon_irq(); -} - -static void op_ppc32_cpu_start(void *dummy) -{ - model->start(ctr); -} - -static int op_ppc32_start(void) -{ - on_each_cpu(op_ppc32_cpu_start, NULL, 0, 1); - return 0; -} - -static inline void op_ppc32_cpu_stop(void *dummy) -{ - model->stop(); -} - -static void op_ppc32_stop(void) -{ - on_each_cpu(op_ppc32_cpu_stop, NULL, 0, 1); -} - -static int op_ppc32_create_files(struct super_block *sb, struct dentry *root) -{ - int i; - - for (i = 0; i < model->num_counters; ++i) { - struct dentry *dir; - char buf[3]; - - snprintf(buf, sizeof buf, "%d", i); - dir = oprofilefs_mkdir(sb, root, buf); - - oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled); - oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event); - oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count); - oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel); - oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user); - - /* FIXME: Not sure if this is used */ - oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask); - } - - oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel); - oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user); - - /* Default to tracing both kernel and user */ - sys.enable_kernel = 1; - sys.enable_user = 1; - - return 0; -} - -static struct oprofile_operations oprof_ppc32_ops = { - .create_files = op_ppc32_create_files, - .setup = op_ppc32_setup, - .shutdown = op_ppc32_shutdown, - .start = op_ppc32_start, - .stop = op_ppc32_stop, - .cpu_type = NULL /* To be filled in below. */ -}; - -int __init oprofile_arch_init(struct oprofile_operations *ops) -{ - char *name; - int cpu_id = smp_processor_id(); - -#ifdef CONFIG_FSL_BOOKE - model = &op_model_fsl_booke; -#else - return -ENODEV; -#endif - - name = kmalloc(32, GFP_KERNEL); - - if (NULL == name) - return -ENOMEM; - - sprintf(name, "ppc/%s", cur_cpu_spec[cpu_id]->cpu_name); - - oprof_ppc32_ops.cpu_type = name; - - model->num_counters = cur_cpu_spec[cpu_id]->num_pmcs; - - *ops = oprof_ppc32_ops; - - printk(KERN_INFO "oprofile: using %s performance monitoring.\n", - oprof_ppc32_ops.cpu_type); - - return 0; -} - -void oprofile_arch_exit(void) -{ - kfree(oprof_ppc32_ops.cpu_type); - oprof_ppc32_ops.cpu_type = NULL; -} diff --git a/arch/ppc64/Makefile b/arch/ppc64/Makefile index 17d2c1eac3b8..a8877881bb48 100644 --- a/arch/ppc64/Makefile +++ b/arch/ppc64/Makefile @@ -85,7 +85,7 @@ libs-y += arch/ppc64/lib/ core-y += arch/ppc64/kernel/ core-y += arch/ppc64/mm/ core-$(CONFIG_XMON) += arch/ppc64/xmon/ -drivers-$(CONFIG_OPROFILE) += arch/ppc64/oprofile/ +drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ boot := arch/ppc64/boot diff --git a/arch/ppc64/oprofile/Makefile b/arch/ppc64/oprofile/Makefile deleted file mode 100644 index 4bf75b776c5b..000000000000 --- a/arch/ppc64/oprofile/Makefile +++ /dev/null @@ -1 +0,0 @@ -include arch/powerpc/oprofile/Makefile