From 86f5a4a7d7e2fd0b8eb38833e568ab1061c7a18c Mon Sep 17 00:00:00 2001 From: Grzegorz Bernacki Date: Thu, 26 Feb 2009 22:55:29 -0700 Subject: [PATCH] powerpc/5200: On the digsy-mtc, configure PSC4 and PSC5 as UARTs On digsy MTC PSC4 and PSC5 should be configured as UART, not PSC3 and PSC4. Signed-off-by: Grzegorz Bernacki Signed-off-by: Grant Likely --- arch/powerpc/boot/dts/digsy_mtc.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts index 0e85ebf7e4c8..4c36186ef946 100644 --- a/arch/powerpc/boot/dts/digsy_mtc.dts +++ b/arch/powerpc/boot/dts/digsy_mtc.dts @@ -155,18 +155,18 @@ reg = <0x1f00 0x100>; }; - serial@2400 { // PSC3 - compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2400 0x100>; - interrupts = <2 3 0>; - }; - serial@2600 { // PSC4 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2600 0x100>; interrupts = <2 11 0>; }; + serial@2800 { // PSC5 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2800 0x100>; + interrupts = <2 12 0>; + }; + ethernet@3000 { compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>;