Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

This commit is contained in:
John W. Linville 2012-02-29 14:53:21 -05:00
Родитель f4fb4b212d 00f157b497
Коммит 8701ff0a88
10 изменённых файлов: 45 добавлений и 34 удалений

Просмотреть файл

@ -489,8 +489,6 @@ static int ar5008_hw_rf_alloc_ext_banks(struct ath_hw *ah)
ATH_ALLOC_BANK(ah->analogBank6Data, ah->iniBank6.ia_rows);
ATH_ALLOC_BANK(ah->analogBank6TPCData, ah->iniBank6TPC.ia_rows);
ATH_ALLOC_BANK(ah->analogBank7Data, ah->iniBank7.ia_rows);
ATH_ALLOC_BANK(ah->addac5416_21,
ah->iniAddac.ia_rows * ah->iniAddac.ia_columns);
ATH_ALLOC_BANK(ah->bank6Temp, ah->iniBank6.ia_rows);
return 0;
@ -519,7 +517,6 @@ static void ar5008_hw_rf_free_ext_banks(struct ath_hw *ah)
ATH_FREE_BANK(ah->analogBank6Data);
ATH_FREE_BANK(ah->analogBank6TPCData);
ATH_FREE_BANK(ah->analogBank7Data);
ATH_FREE_BANK(ah->addac5416_21);
ATH_FREE_BANK(ah->bank6Temp);
#undef ATH_FREE_BANK
@ -805,27 +802,7 @@ static int ar5008_hw_process_ini(struct ath_hw *ah,
if (ah->eep_ops->set_addac)
ah->eep_ops->set_addac(ah, chan);
if (AR_SREV_5416_22_OR_LATER(ah)) {
REG_WRITE_ARRAY(&ah->iniAddac, 1, regWrites);
} else {
struct ar5416IniArray temp;
u32 addacSize =
sizeof(u32) * ah->iniAddac.ia_rows *
ah->iniAddac.ia_columns;
/* For AR5416 2.0/2.1 */
memcpy(ah->addac5416_21,
ah->iniAddac.ia_array, addacSize);
/* override CLKDRV value at [row, column] = [31, 1] */
(ah->addac5416_21)[31 * ah->iniAddac.ia_columns + 1] = 0;
temp.ia_array = ah->addac5416_21;
temp.ia_columns = ah->iniAddac.ia_columns;
temp.ia_rows = ah->iniAddac.ia_rows;
REG_WRITE_ARRAY(&temp, 1, regWrites);
}
REG_WRITE_ARRAY(&ah->iniAddac, 1, regWrites);
REG_WRITE(ah, AR_PHY_ADC_SERIAL_CTL, AR_PHY_SEL_INTERNAL_ADDAC);
ENABLE_REGWRITE_BUFFER(ah);

Просмотреть файл

@ -141,6 +141,25 @@ static void ar9002_hw_init_mode_regs(struct ath_hw *ah)
INIT_INI_ARRAY(&ah->iniBank6TPC, ar5416Bank6TPC_9100,
ARRAY_SIZE(ar5416Bank6TPC_9100), 3);
}
/* iniAddac needs to be modified for these chips */
if (AR_SREV_9160(ah) || !AR_SREV_5416_22_OR_LATER(ah)) {
struct ar5416IniArray *addac = &ah->iniAddac;
u32 size = sizeof(u32) * addac->ia_rows * addac->ia_columns;
u32 *data;
data = kmalloc(size, GFP_KERNEL);
if (!data)
return;
memcpy(data, addac->ia_array, size);
addac->ia_array = data;
if (!AR_SREV_5416_22_OR_LATER(ah)) {
/* override CLKDRV value */
INI_RA(addac, 31,1) = 0;
}
}
}
/* Support for Japan ch.14 (2484) spread */

Просмотреть файл

@ -781,7 +781,6 @@ struct ath_hw {
u32 *analogBank6Data;
u32 *analogBank6TPCData;
u32 *analogBank7Data;
u32 *addac5416_21;
u32 *bank6Temp;
u8 txpower_limit;

Просмотреть файл

@ -1236,6 +1236,7 @@ static bool carl9170_tx_ps_drop(struct ar9170 *ar, struct sk_buff *skb)
{
struct ieee80211_sta *sta;
struct carl9170_sta_info *sta_info;
struct ieee80211_tx_info *tx_info;
rcu_read_lock();
sta = __carl9170_get_tx_sta(ar, skb);
@ -1243,16 +1244,18 @@ static bool carl9170_tx_ps_drop(struct ar9170 *ar, struct sk_buff *skb)
goto out_rcu;
sta_info = (void *) sta->drv_priv;
if (unlikely(sta_info->sleeping)) {
struct ieee80211_tx_info *tx_info;
tx_info = IEEE80211_SKB_CB(skb);
if (unlikely(sta_info->sleeping) &&
!(tx_info->flags & (IEEE80211_TX_CTL_POLL_RESPONSE |
IEEE80211_TX_CTL_CLEAR_PS_FILT))) {
rcu_read_unlock();
tx_info = IEEE80211_SKB_CB(skb);
if (tx_info->flags & IEEE80211_TX_CTL_AMPDU)
atomic_dec(&ar->tx_ampdu_upload);
tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
carl9170_release_dev_space(ar, skb);
carl9170_tx_status(ar, skb, false);
return true;
}

Просмотреть файл

@ -1070,9 +1070,9 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb,
IEEE80211_TX_STAT_AMPDU_NO_BACK;
skb_pull(p, D11_PHY_HDR_LEN);
skb_pull(p, D11_TXH_LEN);
wiphy_err(wiphy, "%s: BA Timeout, seq %d, in_"
"transit %d\n", "AMPDU status", seq,
ini->tx_in_transit);
BCMMSG(wiphy,
"BA Timeout, seq %d, in_transit %d\n",
seq, ini->tx_in_transit);
ieee80211_tx_status_irqsafe(wlc->pub->ieee_hw,
p);
}

Просмотреть файл

@ -1190,6 +1190,7 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv,
unsigned long flags;
struct iwl_addsta_cmd sta_cmd;
u8 sta_id = iwlagn_key_sta_id(priv, ctx->vif, sta);
__le16 key_flags;
/* if station isn't there, neither is the key */
if (sta_id == IWL_INVALID_STATION)
@ -1215,7 +1216,14 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv,
IWL_ERR(priv, "offset %d not used in uCode key table.\n",
keyconf->hw_key_idx);
sta_cmd.key.key_flags = STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID;
key_flags = cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
key_flags |= STA_KEY_FLG_MAP_KEY_MSK | STA_KEY_FLG_NO_ENC |
STA_KEY_FLG_INVALID;
if (!(keyconf->flags & IEEE80211_KEY_FLAG_PAIRWISE))
key_flags |= STA_KEY_MULTICAST_MSK;
sta_cmd.key.key_flags = key_flags;
sta_cmd.key.key_offset = WEP_INVALID_OFFSET;
sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK;
sta_cmd.mode = STA_CONTROL_MODIFY_MSK;

Просмотреть файл

@ -872,6 +872,7 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid,
priv->sec_info.wpa_enabled = false;
priv->sec_info.wpa2_enabled = false;
priv->wep_key_curr_index = 0;
priv->sec_info.encryption_mode = 0;
ret = mwifiex_set_encode(priv, NULL, 0, 0, 1);
if (mode == NL80211_IFTYPE_ADHOC) {

Просмотреть файл

@ -1236,7 +1236,8 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
cancel_work_sync(&rt2x00dev->rxdone_work);
cancel_work_sync(&rt2x00dev->txdone_work);
}
destroy_workqueue(rt2x00dev->workqueue);
if (rt2x00dev->workqueue)
destroy_workqueue(rt2x00dev->workqueue);
/*
* Free the tx status fifo.

Просмотреть файл

@ -1344,6 +1344,9 @@ u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
hw_roc = true;
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
continue;
if (sdata->old_idle == sdata->vif.bss_conf.idle)
continue;
if (!ieee80211_sdata_running(sdata))

Просмотреть файл

@ -447,7 +447,7 @@ void rate_control_get_rate(struct ieee80211_sub_if_data *sdata,
for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
info->control.rates[i].idx = -1;
info->control.rates[i].flags = 0;
info->control.rates[i].count = 1;
info->control.rates[i].count = 0;
}
if (sdata->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)