microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma 

Pull dmaengine updates from Vinod Koul:
 "Main features this time are:

   - BAM v1.3.0 support form qcom bam dma
   - support for Allwinner sun8i dma
   - atmels eXtended DMA Controller driver
   - chancnt cleanup by Maxime
   - fixes spread over drivers"

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (56 commits)
  dmaenegine: Delete a check before free_percpu()
  dmaengine: ioatdma: fix dma mapping errors
  dma: cppi41: add a delay while setting the TD bit
  dma: cppi41: wait longer for the HW to return the descriptor
  dmaengine: fsl-edma: fixup reg offset and hw S/G support in big-endian model
  dmaengine: fsl-edma: fix calculation of remaining bytes
  drivers/dma/pch_dma: declare pch_dma_id_table as static
  dmaengine: ste_dma40: fix error return code
  dma: imx-sdma: clarify about firmware not found error
  Documentation: devicetree: Fix Xilinx VDMA specification
  dmaengine: pl330: update author info
  dmaengine: clarify the issue_pending expectations
  dmaengine: at_xdmac: Add DMA_PRIVATE
  ARM: dts: at_xdmac: fix bad value of dma-cells in documentation
  dmaengine: at_xdmac: fix missing spin_unlock
  dmaengine: at_xdmac: fix a bug in transfer residue computation
  dmaengine: at_xdmac: fix software lockup at_xdmac_tx_status()
  dmaengine: at_xdmac: remove chancnt affectation
  dmaengine: at_xdmac: prefer usage of readl/writel_relaxed
  dmaengine: xdmac: fix print warning on dma_addr_t variable
  ...
This commit is contained in:
Linus Torvalds 2014-12-12 14:59:53 -08:00
Родитель eea0cf3fcd a9507ca3fb
Коммит 87c779baab
47 изменённых файлов: 2413 добавлений и 268 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

54
Documentation/devicetree/bindings/dma/atmel-xdma.txt Normal file
Просмотреть файл

@ -0,0 +1,54 @@
* Atmel Extensible Direct Memory Access Controller (XDMAC)
* XDMA Controller
Required properties:
- compatible: Should be "atmel,<chip>-dma".
<chip> compatible description:
- sama5d4: first SoC adding the XDMAC
- reg: Should contain DMA registers location and length.
- interrupts: Should contain DMA interrupt.
- #dma-cells: Must be <1>, used to represent the number of integer cells in
the dmas property of client devices.
- The 1st cell specifies the channel configuration register:
- bit 13: SIF, source interface identifier, used to get the memory
interface identifier,
- bit 14: DIF, destination interface identifier, used to get the peripheral
interface identifier,
- bit 30-24: PERID, peripheral identifier.
Example:
dma1: dma-controller@f0004000 {
compatible = "atmel,sama5d4-dma";
reg = <0xf0004000 0x200>;
interrupts = <50 4 0>;
#dma-cells = <1>;
};
* DMA clients
DMA clients connected to the Atmel XDMA controller must use the format
described in the dma.txt file, using a one-cell specifier for each channel.
The two cells in order are:
1. A phandle pointing to the DMA controller.
2. Channel configuration register. Configurable fields are:
- bit 13: SIF, source interface identifier, used to get the memory
interface identifier,
- bit 14: DIF, destination interface identifier, used to get the peripheral
interface identifier,
- bit 30-24: PERID, peripheral identifier.
Example:
i2c2: i2c@f8024000 {
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8024000 0x4000>;
interrupts = <34 4 6>;
dmas = <&dma1
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(6))>,
<&dma1
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
| AT91_XDMAC_DT_PERID(7))>;
dma-names = "tx", "rx";
};

1
Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
Просмотреть файл

@ -48,6 +48,7 @@ The full ID of peripheral types can be found below.
21 ESAI
22 SSI Dual FIFO (needs firmware ver >= 2)
23 Shared ASRC
24 SAI
The third cell specifies the transfer priority as below.

4
Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
Просмотреть файл

@ -1,7 +1,9 @@
QCOM BAM DMA controller
Required properties:
- compatible: must contain "qcom,bam-v1.4.0" for MSM8974
- compatible: must be one of the following:
* "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
* "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
- reg: Address range for DMA registers
- interrupts: Should contain the one interrupt shared by all channels
- #dma-cells: must be <1>, the cell in the dmas property of the client device

2
Documentation/devicetree/bindings/dma/sun6i-dma.txt
Просмотреть файл

@ -4,7 +4,7 @@ This driver follows the generic DMA bindings defined in dma.txt.
Required properties:
- compatible: Must be "allwinner,sun6i-a31-dma"
- compatible: Must be "allwinner,sun6i-a31-dma" or "allwinner,sun8i-a23-dma"
- reg: Should contain the registers base address and length
- interrupts: Should contain a reference to the interrupt used by this device
- clocks: Should contain a reference to the parent AHB clock

0
Documentation/dmaengine.txt → Documentation/dmaengine/client.txt
Просмотреть файл

0
Documentation/dmatest.txt → Documentation/dmaengine/dmatest.txt
Просмотреть файл

366
Documentation/dmaengine/provider.txt Normal file
Просмотреть файл

@ -0,0 +1,366 @@
DMAengine controller documentation
==================================
Hardware Introduction
+++++++++++++++++++++
Most of the Slave DMA controllers have the same general principles of
operations.
They have a given number of channels to use for the DMA transfers, and
a given number of requests lines.
Requests and channels are pretty much orthogonal. Channels can be used
to serve several to any requests. To simplify, channels are the
entities that will be doing the copy, and requests what endpoints are
involved.
The request lines actually correspond to physical lines going from the
DMA-eligible devices to the controller itself. Whenever the device
will want to start a transfer, it will assert a DMA request (DRQ) by
asserting that request line.
A very simple DMA controller would only take into account a single
parameter: the transfer size. At each clock cycle, it would transfer a
byte of data from one buffer to another, until the transfer size has
been reached.
That wouldn't work well in the real world, since slave devices might
require a specific number of bits to be transferred in a single
cycle. For example, we may want to transfer as much data as the
physical bus allows to maximize performances when doing a simple
memory copy operation, but our audio device could have a narrower FIFO
that requires data to be written exactly 16 or 24 bits at a time. This
is why most if not all of the DMA controllers can adjust this, using a
parameter called the transfer width.
Moreover, some DMA controllers, whenever the RAM is used as a source
or destination, can group the reads or writes in memory into a buffer,
so instead of having a lot of small memory accesses, which is not
really efficient, you'll get several bigger transfers. This is done
using a parameter called the burst size, that defines how many single
reads/writes it's allowed to do without the controller splitting the
transfer into smaller sub-transfers.
Our theoretical DMA controller would then only be able to do transfers
that involve a single contiguous block of data. However, some of the
transfers we usually have are not, and want to copy data from
non-contiguous buffers to a contiguous buffer, which is called
scatter-gather.
DMAEngine, at least for mem2dev transfers, require support for
scatter-gather. So we're left with two cases here: either we have a
quite simple DMA controller that doesn't support it, and we'll have to
implement it in software, or we have a more advanced DMA controller,
that implements in hardware scatter-gather.
The latter are usually programmed using a collection of chunks to
transfer, and whenever the transfer is started, the controller will go
over that collection, doing whatever we programmed there.
This collection is usually either a table or a linked list. You will
then push either the address of the table and its number of elements,
or the first item of the list to one channel of the DMA controller,
and whenever a DRQ will be asserted, it will go through the collection
to know where to fetch the data from.
Either way, the format of this collection is completely dependent on
your hardware. Each DMA controller will require a different structure,
but all of them will require, for every chunk, at least the source and
destination addresses, whether it should increment these addresses or
not and the three parameters we saw earlier: the burst size, the
transfer width and the transfer size.
The one last thing is that usually, slave devices won't issue DRQ by
default, and you have to enable this in your slave device driver first
whenever you're willing to use DMA.
These were just the general memory-to-memory (also called mem2mem) or
memory-to-device (mem2dev) kind of transfers. Most devices often
support other kind of transfers or memory operations that dmaengine
support and will be detailed later in this document.
DMA Support in Linux
++++++++++++++++++++
Historically, DMA controller drivers have been implemented using the
async TX API, to offload operations such as memory copy, XOR,
cryptography, etc., basically any memory to memory operation.
Over time, the need for memory to device transfers arose, and
dmaengine was extended. Nowadays, the async TX API is written as a
layer on top of dmaengine, and acts as a client. Still, dmaengine
accommodates that API in some cases, and made some design choices to
ensure that it stayed compatible.
For more information on the Async TX API, please look the relevant
documentation file in Documentation/crypto/async-tx-api.txt.
DMAEngine Registration
++++++++++++++++++++++
struct dma_device Initialization
--------------------------------
Just like any other kernel framework, the whole DMAEngine registration
relies on the driver filling a structure and registering against the
framework. In our case, that structure is dma_device.
The first thing you need to do in your driver is to allocate this
structure. Any of the usual memory allocators will do, but you'll also
need to initialize a few fields in there:
* channels: should be initialized as a list using the
INIT_LIST_HEAD macro for example
* dev: should hold the pointer to the struct device associated
to your current driver instance.
Supported transaction types
---------------------------
The next thing you need is to set which transaction types your device
(and driver) supports.
Our dma_device structure has a field called cap_mask that holds the
various types of transaction supported, and you need to modify this
mask using the dma_cap_set function, with various flags depending on
transaction types you support as an argument.
All those capabilities are defined in the dma_transaction_type enum,
in include/linux/dmaengine.h
Currently, the types available are:
* DMA_MEMCPY
- The device is able to do memory to memory copies
* DMA_XOR
- The device is able to perform XOR operations on memory areas
- Used to accelerate XOR intensive tasks, such as RAID5
* DMA_XOR_VAL
- The device is able to perform parity check using the XOR
algorithm against a memory buffer.
* DMA_PQ
- The device is able to perform RAID6 P+Q computations, P being a
simple XOR, and Q being a Reed-Solomon algorithm.
* DMA_PQ_VAL
- The device is able to perform parity check using RAID6 P+Q
algorithm against a memory buffer.
* DMA_INTERRUPT
- The device is able to trigger a dummy transfer that will
generate periodic interrupts
- Used by the client drivers to register a callback that will be
called on a regular basis through the DMA controller interrupt
* DMA_SG
- The device supports memory to memory scatter-gather
transfers.
- Even though a plain memcpy can look like a particular case of a
scatter-gather transfer, with a single chunk to transfer, it's a
distinct transaction type in the mem2mem transfers case
* DMA_PRIVATE
- The devices only supports slave transfers, and as such isn't
available for async transfers.
* DMA_ASYNC_TX
- Must not be set by the device, and will be set by the framework
if needed
- /* TODO: What is it about? */
* DMA_SLAVE
- The device can handle device to memory transfers, including
scatter-gather transfers.
- While in the mem2mem case we were having two distinct types to
deal with a single chunk to copy or a collection of them, here,
we just have a single transaction type that is supposed to
handle both.
- If you want to transfer a single contiguous memory buffer,
simply build a scatter list with only one item.
* DMA_CYCLIC
- The device can handle cyclic transfers.
- A cyclic transfer is a transfer where the chunk collection will
loop over itself, with the last item pointing to the first.
- It's usually used for audio transfers, where you want to operate
on a single ring buffer that you will fill with your audio data.
* DMA_INTERLEAVE
- The device supports interleaved transfer.
- These transfers can transfer data from a non-contiguous buffer
to a non-contiguous buffer, opposed to DMA_SLAVE that can
transfer data from a non-contiguous data set to a continuous
destination buffer.
- It's usually used for 2d content transfers, in which case you
want to transfer a portion of uncompressed data directly to the
display to print it
These various types will also affect how the source and destination
addresses change over time.
Addresses pointing to RAM are typically incremented (or decremented)
after each transfer. In case of a ring buffer, they may loop
(DMA_CYCLIC). Addresses pointing to a device's register (e.g. a FIFO)
are typically fixed.
Device operations
-----------------
Our dma_device structure also requires a few function pointers in
order to implement the actual logic, now that we described what
operations we were able to perform.
The functions that we have to fill in there, and hence have to
implement, obviously depend on the transaction types you reported as
supported.
* device_alloc_chan_resources
* device_free_chan_resources
- These functions will be called whenever a driver will call
dma_request_channel or dma_release_channel for the first/last
time on the channel associated to that driver.
- They are in charge of allocating/freeing all the needed
resources in order for that channel to be useful for your
driver.
- These functions can sleep.
* device_prep_dma_*
- These functions are matching the capabilities you registered
previously.
- These functions all take the buffer or the scatterlist relevant
for the transfer being prepared, and should create a hardware
descriptor or a list of hardware descriptors from it
- These functions can be called from an interrupt context
- Any allocation you might do should be using the GFP_NOWAIT
flag, in order not to potentially sleep, but without depleting
the emergency pool either.
- Drivers should try to pre-allocate any memory they might need
during the transfer setup at probe time to avoid putting to
much pressure on the nowait allocator.
- It should return a unique instance of the
dma_async_tx_descriptor structure, that further represents this
particular transfer.
- This structure can be initialized using the function
dma_async_tx_descriptor_init.
- You'll also need to set two fields in this structure:
+ flags:
TODO: Can it be modified by the driver itself, or
should it be always the flags passed in the arguments
+ tx_submit: A pointer to a function you have to implement,
that is supposed to push the current
transaction descriptor to a pending queue, waiting
for issue_pending to be called.
* device_issue_pending
- Takes the first transaction descriptor in the pending queue,
and starts the transfer. Whenever that transfer is done, it
should move to the next transaction in the list.
- This function can be called in an interrupt context
* device_tx_status
- Should report the bytes left to go over on the given channel
- Should only care about the transaction descriptor passed as
argument, not the currently active one on a given channel
- The tx_state argument might be NULL
- Should use dma_set_residue to report it
- In the case of a cyclic transfer, it should only take into
account the current period.
- This function can be called in an interrupt context.
* device_control
- Used by client drivers to control and configure the channel it
has a handle on.
- Called with a command and an argument
+ The command is one of the values listed by the enum
dma_ctrl_cmd. The valid commands are:
+ DMA_PAUSE
+ Pauses a transfer on the channel
+ This command should operate synchronously on the channel,
pausing right away the work of the given channel
+ DMA_RESUME
+ Restarts a transfer on the channel
+ This command should operate synchronously on the channel,
resuming right away the work of the given channel
+ DMA_TERMINATE_ALL
+ Aborts all the pending and ongoing transfers on the
channel
+ This command should operate synchronously on the channel,
terminating right away all the channels
+ DMA_SLAVE_CONFIG
+ Reconfigures the channel with passed configuration
+ This command should NOT perform synchronously, or on any
currently queued transfers, but only on subsequent ones
+ In this case, the function will receive a
dma_slave_config structure pointer as an argument, that
will detail which configuration to use.
+ Even though that structure contains a direction field,
this field is deprecated in favor of the direction
argument given to the prep_* functions
+ FSLDMA_EXTERNAL_START
+ TODO: Why does that even exist?
+ The argument is an opaque unsigned long. This actually is a
pointer to a struct dma_slave_config that should be used only
in the DMA_SLAVE_CONFIG.
* device_slave_caps
- Called through the framework by client drivers in order to have
an idea of what are the properties of the channel allocated to
them.
- Such properties are the buswidth, available directions, etc.
- Required for every generic layer doing DMA transfers, such as
ASoC.
Misc notes (stuff that should be documented, but don't really know
where to put them)
------------------------------------------------------------------
* dma_run_dependencies
- Should be called at the end of an async TX transfer, and can be
ignored in the slave transfers case.
- Makes sure that dependent operations are run before marking it
as complete.
* dma_cookie_t
- it's a DMA transaction ID that will increment over time.
- Not really relevant any more since the introduction of virt-dma
that abstracts it away.
* DMA_CTRL_ACK
- Undocumented feature
- No one really has an idea of what it's about, besides being
related to reusing the DMA transaction descriptors or having
additional transactions added to it in the async-tx API
- Useless in the case of the slave API
General Design Notes
--------------------
Most of the DMAEngine drivers you'll see are based on a similar design
that handles the end of transfer interrupts in the handler, but defer
most work to a tasklet, including the start of a new transfer whenever
the previous transfer ended.
This is a rather inefficient design though, because the inter-transfer
latency will be not only the interrupt latency, but also the
scheduling latency of the tasklet, which will leave the channel idle
in between, which will slow down the global transfer rate.
You should avoid this kind of practice, and instead of electing a new
transfer in your tasklet, move that part to the interrupt handler in
order to have a shorter idle window (that we can't really avoid
anyway).
Glossary
--------
Burst: A number of consecutive read or write operations
that can be queued to buffers before being flushed to
memory.
Chunk: A contiguous collection of bursts
Transfer: A collection of chunks (be it contiguous or not)

10
MAINTAINERS
Просмотреть файл

@ -1722,6 +1722,13 @@ F: drivers/dma/at_hdmac.c
F: drivers/dma/at_hdmac_regs.h
F: include/linux/platform_data/dma-atmel.h
ATMEL XDMA DRIVER
M: Ludovic Desroches <ludovic.desroches@atmel.com>
L: linux-arm-kernel@lists.infradead.org
L: dmaengine@vger.kernel.org
S: Supported
F: drivers/dma/at_xdmac.c
ATMEL I2C DRIVER
M: Ludovic Desroches <ludovic.desroches@atmel.com>
L: linux-i2c@vger.kernel.org
@ -3162,7 +3169,8 @@ Q: https://patchwork.kernel.org/project/linux-dmaengine/list/
S: Maintained
F: drivers/dma/
F: include/linux/dma*
T: git git://git.infradead.org/users/vkoul/slave-dma.git (slave-dma)
F: Documentation/dmaengine/
T: git git://git.infradead.org/users/vkoul/slave-dma.git
DME1737 HARDWARE MONITOR DRIVER
M: Juerg Haefliger <juergh@gmail.com>

11
drivers/dma/Kconfig
Просмотреть файл

@ -107,6 +107,13 @@ config AT_HDMAC
help
Support the Atmel AHB DMA controller.
config AT_XDMAC
tristate "Atmel XDMA support"
depends on ARCH_AT91
select DMA_ENGINE
help
Support the Atmel XDMA controller.
config FSL_DMA
tristate "Freescale Elo series DMA support"
depends on FSL_SOC
@ -395,12 +402,12 @@ config XILINX_VDMA
config DMA_SUN6I
tristate "Allwinner A31 SoCs DMA support"
depends on MACH_SUN6I || COMPILE_TEST
depends on MACH_SUN6I || MACH_SUN8I || COMPILE_TEST
depends on RESET_CONTROLLER
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
Support for the DMA engine for Allwinner A31 SoCs.
Support for the DMA engine first found in Allwinner A31 SoCs.
config NBPFAXI_DMA
tristate "Renesas Type-AXI NBPF DMA support"

1
drivers/dma/Makefile
Просмотреть файл

@ -16,6 +16,7 @@ obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
obj-$(CONFIG_MV_XOR) += mv_xor.o
obj-$(CONFIG_DW_DMAC_CORE) += dw/
obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
obj-$(CONFIG_AT_XDMAC) += at_xdmac.o
obj-$(CONFIG_MX3_IPU) += ipu/
obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
obj-$(CONFIG_SH_DMAE_BASE) += sh/

2
drivers/dma/amba-pl08x.c
Просмотреть файл

@ -2164,7 +2164,6 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
__func__, ret);
goto out_no_memcpy;
}
pl08x->memcpy.chancnt = ret;
/* Register slave channels */
ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave,
@ -2175,7 +2174,6 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
__func__, ret);
goto out_no_slave;
}
pl08x->slave.chancnt = ret;
ret = dma_async_device_register(&pl08x->memcpy);
if (ret) {

1524
drivers/dma/at_xdmac.c Normal file
Просмотреть файл

Разница между файлами не показана из-за своего большого размера Загрузить разницу

3
drivers/dma/bcm2835-dma.c
Просмотреть файл

@ -525,8 +525,6 @@ static int bcm2835_dma_chan_init(struct bcm2835_dmadev *d, int chan_id, int irq)
vchan_init(&c->vc, &d->ddev);
INIT_LIST_HEAD(&c->node);
d->ddev.chancnt++;
c->chan_base = BCM2835_DMA_CHANIO(d->base, chan_id);
c->ch = chan_id;
c->irq_number = irq;
@ -694,7 +692,6 @@ static struct platform_driver bcm2835_dma_driver = {
.remove = bcm2835_dma_remove,
.driver = {
.name = "bcm2835-dma",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(bcm2835_dma_of_match),
},
};

12
drivers/dma/cppi41.c
Просмотреть файл

@ -1,3 +1,4 @@
#include <linux/delay.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
@ -567,7 +568,7 @@ static int cppi41_tear_down_chan(struct cppi41_channel *c)
reg |= GCR_TEARDOWN;
cppi_writel(reg, c->gcr_reg);
c->td_queued = 1;
c->td_retry = 100;
c->td_retry = 500;
}
if (!c->td_seen || !c->td_desc_seen) {
@ -603,12 +604,16 @@ static int cppi41_tear_down_chan(struct cppi41_channel *c)
* descriptor before the TD we fetch it from enqueue, it has to be
* there waiting for us.
*/
if (!c->td_seen && c->td_retry)
if (!c->td_seen && c->td_retry) {
udelay(1);
return -EAGAIN;
}
WARN_ON(!c->td_retry);
if (!c->td_desc_seen) {
desc_phys = cppi41_pop_desc(cdd, c->q_num);
if (!desc_phys)
desc_phys = cppi41_pop_desc(cdd, c->q_comp_num);
WARN_ON(!desc_phys);
}
@ -1088,7 +1093,6 @@ static struct platform_driver cpp41_dma_driver = {
.remove = cppi41_dma_remove,
.driver = {
.name = "cppi41-dma-engine",
.owner = THIS_MODULE,
.pm = &cppi41_pm_ops,
.of_match_table = of_match_ptr(cppi41_dma_ids),
},

4
drivers/dma/dma-jz4740.c
Просмотреть файл

@ -563,10 +563,9 @@ static int jz4740_dma_probe(struct platform_device *pdev)
dd->device_prep_dma_cyclic = jz4740_dma_prep_dma_cyclic;
dd->device_control = jz4740_dma_control;
dd->dev = &pdev->dev;
dd->chancnt = JZ_DMA_NR_CHANS;
INIT_LIST_HEAD(&dd->channels);
for (i = 0; i < dd->chancnt; i++) {
for (i = 0; i < JZ_DMA_NR_CHANS; i++) {
chan = &dmadev->chan[i];
chan->id = i;
chan->vchan.desc_free = jz4740_dma_desc_free;
@ -608,7 +607,6 @@ static struct platform_driver jz4740_dma_driver = {
.remove = jz4740_dma_remove,
.driver = {
.name = "jz4740-dma",
.owner = THIS_MODULE,
},
};
module_platform_driver(jz4740_dma_driver);

1
drivers/dma/dmaengine.c
Просмотреть файл

@ -330,7 +330,6 @@ static int __init dma_channel_table_init(void)
if (err) {
pr_err("initialization failure\n");
for_each_dma_cap_mask(cap, dma_cap_mask_all)
if (channel_table[cap])
free_percpu(channel_table[cap]);
}

173
drivers/dma/fsl-edma.c
Просмотреть файл

@ -118,17 +118,17 @@
BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
struct fsl_edma_hw_tcd {
u32 saddr;
u16 soff;
u16 attr;
u32 nbytes;
u32 slast;
u32 daddr;
u16 doff;
u16 citer;
u32 dlast_sga;
u16 csr;
u16 biter;
__le32 saddr;
__le16 soff;
__le16 attr;
__le32 nbytes;
__le32 slast;
__le32 daddr;
__le16 doff;
__le16 citer;
__le32 dlast_sga;
__le16 csr;
__le16 biter;
};
struct fsl_edma_sw_tcd {
@ -175,18 +175,12 @@ struct fsl_edma_engine {
};
/*
* R/W functions for big- or little-endian registers
* the eDMA controller's endian is independent of the CPU core's endian.
* R/W functions for big- or little-endian registers:
* The eDMA controller's endian is independent of the CPU core's endian.
* For the big-endian IP module, the offset for 8-bit or 16-bit registers
* should also be swapped opposite to that in little-endian IP.
*/
static u16 edma_readw(struct fsl_edma_engine *edma, void __iomem *addr)
{
if (edma->big_endian)
return ioread16be(addr);
else
return ioread16(addr);
}
static u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr)
{
if (edma->big_endian)
@ -197,13 +191,18 @@ static u32 edma_readl(struct fsl_edma_engine *edma, void __iomem *addr)
static void edma_writeb(struct fsl_edma_engine *edma, u8 val, void __iomem *addr)
{
/* swap the reg offset for these in big-endian mode */
if (edma->big_endian)
iowrite8(val, (void __iomem *)((unsigned long)addr ^ 0x3));
else
iowrite8(val, addr);
}
static void edma_writew(struct fsl_edma_engine *edma, u16 val, void __iomem *addr)
{
/* swap the reg offset for these in big-endian mode */
if (edma->big_endian)
iowrite16be(val, addr);
iowrite16be(val, (void __iomem *)((unsigned long)addr ^ 0x2));
else
iowrite16(val, addr);
}
@ -254,13 +253,12 @@ static void fsl_edma_chan_mux(struct fsl_edma_chan *fsl_chan,
chans_per_mux = fsl_chan->edma->n_chans / DMAMUX_NR;
ch_off = fsl_chan->vchan.chan.chan_id % chans_per_mux;
muxaddr = fsl_chan->edma->muxbase[ch / chans_per_mux];
slot = EDMAMUX_CHCFG_SOURCE(slot);
if (enable)
edma_writeb(fsl_chan->edma,
EDMAMUX_CHCFG_ENBL | EDMAMUX_CHCFG_SOURCE(slot),
muxaddr + ch_off);
iowrite8(EDMAMUX_CHCFG_ENBL | slot, muxaddr + ch_off);
else
edma_writeb(fsl_chan->edma, EDMAMUX_CHCFG_DIS, muxaddr + ch_off);
iowrite8(EDMAMUX_CHCFG_DIS, muxaddr + ch_off);
}
static unsigned int fsl_edma_get_tcd_attr(enum dma_slave_buswidth addr_width)
@ -286,8 +284,7 @@ static void fsl_edma_free_desc(struct virt_dma_desc *vdesc)
fsl_desc = to_fsl_edma_desc(vdesc);
for (i = 0; i < fsl_desc->n_tcds; i++)
dma_pool_free(fsl_desc->echan->tcd_pool,
fsl_desc->tcd[i].vtcd,
dma_pool_free(fsl_desc->echan->tcd_pool, fsl_desc->tcd[i].vtcd,
fsl_desc->tcd[i].ptcd);
kfree(fsl_desc);
}
@ -363,8 +360,8 @@ static size_t fsl_edma_desc_residue(struct fsl_edma_chan *fsl_chan,
/* calculate the total size in this desc */
for (len = i = 0; i < fsl_chan->edesc->n_tcds; i++)
len += edma_readl(fsl_chan->edma, &(edesc->tcd[i].vtcd->nbytes))
* edma_readw(fsl_chan->edma, &(edesc->tcd[i].vtcd->biter));
len += le32_to_cpu(edesc->tcd[i].vtcd->nbytes)
* le16_to_cpu(edesc->tcd[i].vtcd->biter);
if (!in_progress)
return len;
@ -376,17 +373,15 @@ static size_t fsl_edma_desc_residue(struct fsl_edma_chan *fsl_chan,
/* figure out the finished and calculate the residue */
for (i = 0; i < fsl_chan->edesc->n_tcds; i++) {
size = edma_readl(fsl_chan->edma, &(edesc->tcd[i].vtcd->nbytes))
* edma_readw(fsl_chan->edma, &(edesc->tcd[i].vtcd->biter));
size = le32_to_cpu(edesc->tcd[i].vtcd->nbytes)
* le16_to_cpu(edesc->tcd[i].vtcd->biter);
if (dir == DMA_MEM_TO_DEV)
dma_addr = edma_readl(fsl_chan->edma,
&(edesc->tcd[i].vtcd->saddr));
dma_addr = le32_to_cpu(edesc->tcd[i].vtcd->saddr);
else
dma_addr = edma_readl(fsl_chan->edma,
&(edesc->tcd[i].vtcd->daddr));
dma_addr = le32_to_cpu(edesc->tcd[i].vtcd->daddr);
len -= size;
if (cur_addr > dma_addr && cur_addr < dma_addr + size) {
if (cur_addr >= dma_addr && cur_addr < dma_addr + size) {
len += dma_addr + size - cur_addr;
break;
}
@ -424,34 +419,39 @@ static enum dma_status fsl_edma_tx_status(struct dma_chan *chan,
return fsl_chan->status;
}
static void fsl_edma_set_tcd_params(struct fsl_edma_chan *fsl_chan,
u32 src, u32 dst, u16 attr, u16 soff, u32 nbytes,
u32 slast, u16 citer, u16 biter, u32 doff, u32 dlast_sga,
u16 csr)
static void fsl_edma_set_tcd_regs(struct fsl_edma_chan *fsl_chan,
struct fsl_edma_hw_tcd *tcd)
{
struct fsl_edma_engine *edma = fsl_chan->edma;
void __iomem *addr = fsl_chan->edma->membase;
u32 ch = fsl_chan->vchan.chan.chan_id;
/*
* TCD parameters have been swapped in fill_tcd_params(),
* so just write them to registers in the cpu endian here
* TCD parameters are stored in struct fsl_edma_hw_tcd in little
* endian format. However, we need to load the TCD registers in
* big- or little-endian obeying the eDMA engine model endian.
*/
writew(0, addr + EDMA_TCD_CSR(ch));
writel(src, addr + EDMA_TCD_SADDR(ch));
writel(dst, addr + EDMA_TCD_DADDR(ch));
writew(attr, addr + EDMA_TCD_ATTR(ch));
writew(soff, addr + EDMA_TCD_SOFF(ch));
writel(nbytes, addr + EDMA_TCD_NBYTES(ch));
writel(slast, addr + EDMA_TCD_SLAST(ch));
writew(citer, addr + EDMA_TCD_CITER(ch));
writew(biter, addr + EDMA_TCD_BITER(ch));
writew(doff, addr + EDMA_TCD_DOFF(ch));
writel(dlast_sga, addr + EDMA_TCD_DLAST_SGA(ch));
writew(csr, addr + EDMA_TCD_CSR(ch));
edma_writew(edma, 0, addr + EDMA_TCD_CSR(ch));
edma_writel(edma, le32_to_cpu(tcd->saddr), addr + EDMA_TCD_SADDR(ch));
edma_writel(edma, le32_to_cpu(tcd->daddr), addr + EDMA_TCD_DADDR(ch));
edma_writew(edma, le16_to_cpu(tcd->attr), addr + EDMA_TCD_ATTR(ch));
edma_writew(edma, le16_to_cpu(tcd->soff), addr + EDMA_TCD_SOFF(ch));
edma_writel(edma, le32_to_cpu(tcd->nbytes), addr + EDMA_TCD_NBYTES(ch));
edma_writel(edma, le32_to_cpu(tcd->slast), addr + EDMA_TCD_SLAST(ch));
edma_writew(edma, le16_to_cpu(tcd->citer), addr + EDMA_TCD_CITER(ch));
edma_writew(edma, le16_to_cpu(tcd->biter), addr + EDMA_TCD_BITER(ch));
edma_writew(edma, le16_to_cpu(tcd->doff), addr + EDMA_TCD_DOFF(ch));
edma_writel(edma, le32_to_cpu(tcd->dlast_sga), addr + EDMA_TCD_DLAST_SGA(ch));
edma_writew(edma, le16_to_cpu(tcd->csr), addr + EDMA_TCD_CSR(ch));
}
static void fill_tcd_params(struct fsl_edma_engine *edma,
struct fsl_edma_hw_tcd *tcd, u32 src, u32 dst,
static inline
void fsl_edma_fill_tcd(struct fsl_edma_hw_tcd *tcd, u32 src, u32 dst,
u16 attr, u16 soff, u32 nbytes, u32 slast, u16 citer,
u16 biter, u16 doff, u32 dlast_sga, bool major_int,
bool disable_req, bool enable_sg)
@ -459,20 +459,27 @@ static void fill_tcd_params(struct fsl_edma_engine *edma,
u16 csr = 0;
/*
* eDMA hardware SGs require the TCD parameters stored in memory
* the same endian as the eDMA module so that they can be loaded
* automatically by the engine
* eDMA hardware SGs require the TCDs to be stored in little
* endian format irrespective of the register endian model.
* So we put the value in little endian in memory, waiting
* for fsl_edma_set_tcd_regs doing the swap.
*/
edma_writel(edma, src, &(tcd->saddr));
edma_writel(edma, dst, &(tcd->daddr));
edma_writew(edma, attr, &(tcd->attr));
edma_writew(edma, EDMA_TCD_SOFF_SOFF(soff), &(tcd->soff));
edma_writel(edma, EDMA_TCD_NBYTES_NBYTES(nbytes), &(tcd->nbytes));
edma_writel(edma, EDMA_TCD_SLAST_SLAST(slast), &(tcd->slast));
edma_writew(edma, EDMA_TCD_CITER_CITER(citer), &(tcd->citer));
edma_writew(edma, EDMA_TCD_DOFF_DOFF(doff), &(tcd->doff));
edma_writel(edma, EDMA_TCD_DLAST_SGA_DLAST_SGA(dlast_sga), &(tcd->dlast_sga));
edma_writew(edma, EDMA_TCD_BITER_BITER(biter), &(tcd->biter));
tcd->saddr = cpu_to_le32(src);
tcd->daddr = cpu_to_le32(dst);
tcd->attr = cpu_to_le16(attr);
tcd->soff = cpu_to_le16(EDMA_TCD_SOFF_SOFF(soff));
tcd->nbytes = cpu_to_le32(EDMA_TCD_NBYTES_NBYTES(nbytes));
tcd->slast = cpu_to_le32(EDMA_TCD_SLAST_SLAST(slast));
tcd->citer = cpu_to_le16(EDMA_TCD_CITER_CITER(citer));
tcd->doff = cpu_to_le16(EDMA_TCD_DOFF_DOFF(doff));
tcd->dlast_sga = cpu_to_le32(EDMA_TCD_DLAST_SGA_DLAST_SGA(dlast_sga));
tcd->biter = cpu_to_le16(EDMA_TCD_BITER_BITER(biter));
if (major_int)
csr |= EDMA_TCD_CSR_INT_MAJOR;
@ -482,7 +489,7 @@ static void fill_tcd_params(struct fsl_edma_engine *edma,
if (enable_sg)
csr |= EDMA_TCD_CSR_E_SG;
edma_writew(edma, csr, &(tcd->csr));
tcd->csr = cpu_to_le16(csr);
}
static struct fsl_edma_desc *fsl_edma_alloc_desc(struct fsl_edma_chan *fsl_chan,
@ -558,9 +565,9 @@ static struct dma_async_tx_descriptor *fsl_edma_prep_dma_cyclic(
doff = fsl_chan->fsc.addr_width;
}
fill_tcd_params(fsl_chan->edma, fsl_desc->tcd[i].vtcd, src_addr,
dst_addr, fsl_chan->fsc.attr, soff, nbytes, 0,
iter, iter, doff, last_sg, true, false, true);
fsl_edma_fill_tcd(fsl_desc->tcd[i].vtcd, src_addr, dst_addr,
fsl_chan->fsc.attr, soff, nbytes, 0, iter,
iter, doff, last_sg, true, false, true);
dma_buf_next += period_len;
}
@ -607,15 +614,15 @@ static struct dma_async_tx_descriptor *fsl_edma_prep_slave_sg(
iter = sg_dma_len(sg) / nbytes;
if (i < sg_len - 1) {
last_sg = fsl_desc->tcd[(i + 1)].ptcd;
fill_tcd_params(fsl_chan->edma, fsl_desc->tcd[i].vtcd,
src_addr, dst_addr, fsl_chan->fsc.attr,
soff, nbytes, 0, iter, iter, doff, last_sg,
fsl_edma_fill_tcd(fsl_desc->tcd[i].vtcd, src_addr,
dst_addr, fsl_chan->fsc.attr, soff,
nbytes, 0, iter, iter, doff, last_sg,
false, false, true);
} else {
last_sg = 0;
fill_tcd_params(fsl_chan->edma, fsl_desc->tcd[i].vtcd,
src_addr, dst_addr, fsl_chan->fsc.attr,
soff, nbytes, 0, iter, iter, doff, last_sg,
fsl_edma_fill_tcd(fsl_desc->tcd[i].vtcd, src_addr,
dst_addr, fsl_chan->fsc.attr, soff,
nbytes, 0, iter, iter, doff, last_sg,
true, true, false);
}
}
@ -625,17 +632,13 @@ static struct dma_async_tx_descriptor *fsl_edma_prep_slave_sg(
static void fsl_edma_xfer_desc(struct fsl_edma_chan *fsl_chan)
{
struct fsl_edma_hw_tcd *tcd;
struct virt_dma_desc *vdesc;
vdesc = vchan_next_desc(&fsl_chan->vchan);
if (!vdesc)
return;
fsl_chan->edesc = to_fsl_edma_desc(vdesc);
tcd = fsl_chan->edesc->tcd[0].vtcd;
fsl_edma_set_tcd_params(fsl_chan, tcd->saddr, tcd->daddr, tcd->attr,
tcd->soff, tcd->nbytes, tcd->slast, tcd->citer,
tcd->biter, tcd->doff, tcd->dlast_sga, tcd->csr);
fsl_edma_set_tcd_regs(fsl_chan, fsl_chan->edesc->tcd[0].vtcd);
fsl_edma_enable_request(fsl_chan);
fsl_chan->status = DMA_IN_PROGRESS;
}

1
drivers/dma/fsldma.c
Просмотреть файл

@ -1337,7 +1337,6 @@ static int fsl_dma_chan_probe(struct fsldma_device *fdev,
/* Add the channel to DMA device channel list */
list_add_tail(&chan->common.device_node, &fdev->common.channels);
fdev->common.chancnt++;
dev_info(fdev->dev, "#%d (%s), irq %d\n", chan->id, compatible,
chan->irq != NO_IRQ ? chan->irq : fdev->irq);

6
drivers/dma/imx-sdma.c
Просмотреть файл

@ -729,6 +729,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
case IMX_DMATYPE_CSPI:
case IMX_DMATYPE_EXT:
case IMX_DMATYPE_SSI:
case IMX_DMATYPE_SAI:
per_2_emi = sdma->script_addrs->app_2_mcu_addr;
emi_2_per = sdma->script_addrs->mcu_2_app_addr;
break;
@ -1287,7 +1288,8 @@ static void sdma_load_firmware(const struct firmware *fw, void *context)
unsigned short *ram_code;
if (!fw) {
dev_err(sdma->dev, "firmware not found\n");
dev_info(sdma->dev, "external firmware not found, using ROM firmware\n");
/* In this case we just use the ROM firmware. */
return;
}
@ -1346,7 +1348,7 @@ static int sdma_get_firmware(struct sdma_engine *sdma,
return ret;
}
static int __init sdma_init(struct sdma_engine *sdma)
static int sdma_init(struct sdma_engine *sdma)
{
int i, ret;
dma_addr_t ccb_phys;

27
drivers/dma/ioat/dma_v3.c
Просмотреть файл

@ -1265,9 +1265,17 @@ static int ioat_xor_val_self_test(struct ioatdma_device *device)
op = IOAT_OP_XOR;
dest_dma = dma_map_page(dev, dest, 0, PAGE_SIZE, DMA_FROM_DEVICE);
if (dma_mapping_error(dev, dest_dma))
goto dma_unmap;
for (i = 0; i < IOAT_NUM_SRC_TEST; i++)
dma_srcs[i] = DMA_ERROR_CODE;
for (i = 0; i < IOAT_NUM_SRC_TEST; i++) {
dma_srcs[i] = dma_map_page(dev, xor_srcs[i], 0, PAGE_SIZE,
DMA_TO_DEVICE);
if (dma_mapping_error(dev, dma_srcs[i]))
goto dma_unmap;
}
tx = dma->device_prep_dma_xor(dma_chan, dest_dma, dma_srcs,
IOAT_NUM_SRC_TEST, PAGE_SIZE,
DMA_PREP_INTERRUPT);
@ -1298,7 +1306,6 @@ static int ioat_xor_val_self_test(struct ioatdma_device *device)
goto dma_unmap;
}
dma_unmap_page(dev, dest_dma, PAGE_SIZE, DMA_FROM_DEVICE);
for (i = 0; i < IOAT_NUM_SRC_TEST; i++)
dma_unmap_page(dev, dma_srcs[i], PAGE_SIZE, DMA_TO_DEVICE);
@ -1313,6 +1320,8 @@ static int ioat_xor_val_self_test(struct ioatdma_device *device)
}
dma_sync_single_for_device(dev, dest_dma, PAGE_SIZE, DMA_FROM_DEVICE);
dma_unmap_page(dev, dest_dma, PAGE_SIZE, DMA_FROM_DEVICE);
/* skip validate if the capability is not present */
if (!dma_has_cap(DMA_XOR_VAL, dma_chan->device->cap_mask))
goto free_resources;
@ -1327,8 +1336,13 @@ static int ioat_xor_val_self_test(struct ioatdma_device *device)
xor_val_result = 1;
for (i = 0; i < IOAT_NUM_SRC_TEST + 1; i++)
dma_srcs[i] = DMA_ERROR_CODE;
for (i = 0; i < IOAT_NUM_SRC_TEST + 1; i++) {
dma_srcs[i] = dma_map_page(dev, xor_val_srcs[i], 0, PAGE_SIZE,
DMA_TO_DEVICE);
if (dma_mapping_error(dev, dma_srcs[i]))
goto dma_unmap;
}
tx = dma->device_prep_dma_xor_val(dma_chan, dma_srcs,
IOAT_NUM_SRC_TEST + 1, PAGE_SIZE,
&xor_val_result, DMA_PREP_INTERRUPT);
@ -1374,8 +1388,13 @@ static int ioat_xor_val_self_test(struct ioatdma_device *device)
xor_val_result = 0;
for (i = 0; i < IOAT_NUM_SRC_TEST + 1; i++)
dma_srcs[i] = DMA_ERROR_CODE;
for (i = 0; i < IOAT_NUM_SRC_TEST + 1; i++) {
dma_srcs[i] = dma_map_page(dev, xor_val_srcs[i], 0, PAGE_SIZE,
DMA_TO_DEVICE);
if (dma_mapping_error(dev, dma_srcs[i]))
goto dma_unmap;
}
tx = dma->device_prep_dma_xor_val(dma_chan, dma_srcs,
IOAT_NUM_SRC_TEST + 1, PAGE_SIZE,
&xor_val_result, DMA_PREP_INTERRUPT);
@ -1417,12 +1436,16 @@ static int ioat_xor_val_self_test(struct ioatdma_device *device)
goto free_resources;
dma_unmap:
if (op == IOAT_OP_XOR) {
dma_unmap_page(dev, dest_dma, PAGE_SIZE, DMA_FROM_DEVICE);
if (dest_dma != DMA_ERROR_CODE)
dma_unmap_page(dev, dest_dma, PAGE_SIZE,
DMA_FROM_DEVICE);
for (i = 0; i < IOAT_NUM_SRC_TEST; i++)
if (dma_srcs[i] != DMA_ERROR_CODE)
dma_unmap_page(dev, dma_srcs[i], PAGE_SIZE,
DMA_TO_DEVICE);
} else if (op == IOAT_OP_XOR_VAL) {
for (i = 0; i < IOAT_NUM_SRC_TEST + 1; i++)
if (dma_srcs[i] != DMA_ERROR_CODE)
dma_unmap_page(dev, dma_srcs[i], PAGE_SIZE,
DMA_TO_DEVICE);
}

1
drivers/dma/iop-adma.c
Просмотреть файл

@ -1557,7 +1557,6 @@ static struct platform_driver iop_adma_driver = {
.probe = iop_adma_probe,
.remove = iop_adma_remove,
.driver = {
.owner = THIS_MODULE,
.name = "iop-adma",
},
};

4
drivers/dma/k3dma.c
Просмотреть файл

@ -722,7 +722,6 @@ static int k3_dma_probe(struct platform_device *op)
d->slave.device_issue_pending = k3_dma_issue_pending;
d->slave.device_control = k3_dma_control;
d->slave.copy_align = DMA_ALIGN;
d->slave.chancnt = d->dma_requests;
/* init virtual channel */
d->chans = devm_kzalloc(&op->dev,
@ -787,6 +786,7 @@ static int k3_dma_remove(struct platform_device *op)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int k3_dma_suspend(struct device *dev)
{
struct k3_dma_dev *d = dev_get_drvdata(dev);
@ -816,13 +816,13 @@ static int k3_dma_resume(struct device *dev)
k3_dma_enable_dma(d, true);
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(k3_dma_pmops, k3_dma_suspend, k3_dma_resume);
static struct platform_driver k3_pdma_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
.pm = &k3_dma_pmops,
.of_match_table = k3_pdma_dt_ids,
},

1
drivers/dma/mmp_pdma.c
Просмотреть файл

@ -1098,7 +1098,6 @@ static const struct platform_device_id mmp_pdma_id_table[] = {
static struct platform_driver mmp_pdma_driver = {
.driver = {
.name = "mmp-pdma",
.owner = THIS_MODULE,
.of_match_table = mmp_pdma_dt_ids,
},
.id_table = mmp_pdma_id_table,

1
drivers/dma/mmp_tdma.c
Просмотреть файл

@ -703,7 +703,6 @@ static const struct platform_device_id mmp_tdma_id_table[] = {
static struct platform_driver mmp_tdma_driver = {
.driver = {
.name = "mmp-tdma",
.owner = THIS_MODULE,
.of_match_table = mmp_tdma_dt_ids,
},
.id_table = mmp_tdma_id_table,

13
drivers/dma/mpc512x_dma.c
Просмотреть файл

@ -885,6 +885,7 @@ static int mpc_dma_probe(struct platform_device *op)
struct resource res;
ulong regs_start, regs_size;
int retval, i;
u8 chancnt;
mdma = devm_kzalloc(dev, sizeof(struct mpc_dma), GFP_KERNEL);
if (!mdma) {
@ -956,10 +957,6 @@ static int mpc_dma_probe(struct platform_device *op)
dma = &mdma->dma;
dma->dev = dev;
if (mdma->is_mpc8308)
dma->chancnt = MPC8308_DMACHAN_MAX;
else
dma->chancnt = MPC512x_DMACHAN_MAX;
dma->device_alloc_chan_resources = mpc_dma_alloc_chan_resources;
dma->device_free_chan_resources = mpc_dma_free_chan_resources;
dma->device_issue_pending = mpc_dma_issue_pending;
@ -972,7 +969,12 @@ static int mpc_dma_probe(struct platform_device *op)
dma_cap_set(DMA_MEMCPY, dma->cap_mask);
dma_cap_set(DMA_SLAVE, dma->cap_mask);
for (i = 0; i < dma->chancnt; i++) {
if (mdma->is_mpc8308)
chancnt = MPC8308_DMACHAN_MAX;
else
chancnt = MPC512x_DMACHAN_MAX;
for (i = 0; i < chancnt; i++) {
mchan = &mdma->channels[i];
mchan->chan.device = dma;
@ -1090,7 +1092,6 @@ static struct platform_driver mpc_dma_driver = {
.remove = mpc_dma_remove,
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
.of_match_table = mpc_dma_match,
},
};

1
drivers/dma/nbpfaxi.c
Просмотреть файл

@ -1500,7 +1500,6 @@ static const struct dev_pm_ops nbpf_pm_ops = {
static struct platform_driver nbpf_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "dma-nbpf",
.of_match_table = nbpf_match,
.pm = &nbpf_pm_ops,

2
drivers/dma/omap-dma.c
Просмотреть файл

@ -1074,8 +1074,6 @@ static int omap_dma_chan_init(struct omap_dmadev *od, int dma_sig)
vchan_init(&c->vc, &od->ddev);
INIT_LIST_HEAD(&c->node);
od->ddev.chancnt++;
return 0;
}

2
drivers/dma/pch_dma.c
Просмотреть файл

@ -997,7 +997,7 @@ static void pch_dma_remove(struct pci_dev *pdev)
#define PCI_DEVICE_ID_ML7831_DMA1_8CH 0x8810
#define PCI_DEVICE_ID_ML7831_DMA2_4CH 0x8815
const struct pci_device_id pch_dma_id_table[] = {
static const struct pci_device_id pch_dma_id_table[] = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_8CH), 8 },
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_4CH), 4 },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA1_8CH), 8}, /* UART Video */

7
drivers/dma/pl330.c
Просмотреть файл

@ -2619,6 +2619,9 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
return -ENOMEM;
}
pd = &pl330->ddma;
pd->dev = &adev->dev;
pl330->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
res = &adev->res;
@ -2655,7 +2658,6 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
if (!add_desc(pl330, GFP_KERNEL, NR_DEFAULT_DESC))
dev_warn(&adev->dev, "unable to allocate desc\n");
pd = &pl330->ddma;
INIT_LIST_HEAD(&pd->channels);
/* Initialize channel parameters */
@ -2692,7 +2694,6 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
list_add_tail(&pch->chan.device_node, &pd->channels);
}
pd->dev = &adev->dev;
if (pdat) {
pd->cap_mask = pdat->cap_mask;
} else {
@ -2819,6 +2820,6 @@ static struct amba_driver pl330_driver = {
module_amba_driver(pl330_driver);
MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>");
MODULE_AUTHOR("Jaswinder Singh <jassisinghbrar@gmail.com>");
MODULE_DESCRIPTION("API Driver for PL330 DMAC");
MODULE_LICENSE("GPL");

231
drivers/dma/qcom_bam_dma.c
Просмотреть файл

@ -79,35 +79,97 @@ struct bam_async_desc {
struct bam_desc_hw desc[0];
};
#define BAM_CTRL 0x0000
#define BAM_REVISION 0x0004
#define BAM_SW_REVISION 0x0080
#define BAM_NUM_PIPES 0x003C
#define BAM_TIMER 0x0040
#define BAM_TIMER_CTRL 0x0044
#define BAM_DESC_CNT_TRSHLD 0x0008
#define BAM_IRQ_SRCS 0x000C
#define BAM_IRQ_SRCS_MSK 0x0010
#define BAM_IRQ_SRCS_UNMASKED 0x0030
#define BAM_IRQ_STTS 0x0014
#define BAM_IRQ_CLR 0x0018
#define BAM_IRQ_EN 0x001C
#define BAM_CNFG_BITS 0x007C
#define BAM_IRQ_SRCS_EE(ee) (0x0800 + ((ee) * 0x80))
#define BAM_IRQ_SRCS_MSK_EE(ee) (0x0804 + ((ee) * 0x80))
#define BAM_P_CTRL(pipe) (0x1000 + ((pipe) * 0x1000))
#define BAM_P_RST(pipe) (0x1004 + ((pipe) * 0x1000))
#define BAM_P_HALT(pipe) (0x1008 + ((pipe) * 0x1000))
#define BAM_P_IRQ_STTS(pipe) (0x1010 + ((pipe) * 0x1000))
#define BAM_P_IRQ_CLR(pipe) (0x1014 + ((pipe) * 0x1000))
#define BAM_P_IRQ_EN(pipe) (0x1018 + ((pipe) * 0x1000))
#define BAM_P_EVNT_DEST_ADDR(pipe) (0x182C + ((pipe) * 0x1000))
#define BAM_P_EVNT_REG(pipe) (0x1818 + ((pipe) * 0x1000))
#define BAM_P_SW_OFSTS(pipe) (0x1800 + ((pipe) * 0x1000))
#define BAM_P_DATA_FIFO_ADDR(pipe) (0x1824 + ((pipe) * 0x1000))
#define BAM_P_DESC_FIFO_ADDR(pipe) (0x181C + ((pipe) * 0x1000))
#define BAM_P_EVNT_TRSHLD(pipe) (0x1828 + ((pipe) * 0x1000))
#define BAM_P_FIFO_SIZES(pipe) (0x1820 + ((pipe) * 0x1000))
enum bam_reg {
BAM_CTRL,
BAM_REVISION,
BAM_NUM_PIPES,
BAM_DESC_CNT_TRSHLD,
BAM_IRQ_SRCS,
BAM_IRQ_SRCS_MSK,
BAM_IRQ_SRCS_UNMASKED,
BAM_IRQ_STTS,
BAM_IRQ_CLR,
BAM_IRQ_EN,
BAM_CNFG_BITS,
BAM_IRQ_SRCS_EE,
BAM_IRQ_SRCS_MSK_EE,
BAM_P_CTRL,
BAM_P_RST,
BAM_P_HALT,
BAM_P_IRQ_STTS,
BAM_P_IRQ_CLR,
BAM_P_IRQ_EN,
BAM_P_EVNT_DEST_ADDR,
BAM_P_EVNT_REG,
BAM_P_SW_OFSTS,
BAM_P_DATA_FIFO_ADDR,
BAM_P_DESC_FIFO_ADDR,
BAM_P_EVNT_GEN_TRSHLD,
BAM_P_FIFO_SIZES,
};
struct reg_offset_data {
u32 base_offset;
unsigned int pipe_mult, evnt_mult, ee_mult;
};
static const struct reg_offset_data bam_v1_3_reg_info[] = {
[BAM_CTRL] = { 0x0F80, 0x00, 0x00, 0x00 },
[BAM_REVISION] = { 0x0F84, 0x00, 0x00, 0x00 },
[BAM_NUM_PIPES] = { 0x0FBC, 0x00, 0x00, 0x00 },
[BAM_DESC_CNT_TRSHLD] = { 0x0F88, 0x00, 0x00, 0x00 },
[BAM_IRQ_SRCS] = { 0x0F8C, 0x00, 0x00, 0x00 },
[BAM_IRQ_SRCS_MSK] = { 0x0F90, 0x00, 0x00, 0x00 },
[BAM_IRQ_SRCS_UNMASKED] = { 0x0FB0, 0x00, 0x00, 0x00 },
[BAM_IRQ_STTS] = { 0x0F94, 0x00, 0x00, 0x00 },
[BAM_IRQ_CLR] = { 0x0F98, 0x00, 0x00, 0x00 },
[BAM_IRQ_EN] = { 0x0F9C, 0x00, 0x00, 0x00 },
[BAM_CNFG_BITS] = { 0x0FFC, 0x00, 0x00, 0x00 },
[BAM_IRQ_SRCS_EE] = { 0x1800, 0x00, 0x00, 0x80 },
[BAM_IRQ_SRCS_MSK_EE] = { 0x1804, 0x00, 0x00, 0x80 },
[BAM_P_CTRL] = { 0x0000, 0x80, 0x00, 0x00 },
[BAM_P_RST] = { 0x0004, 0x80, 0x00, 0x00 },
[BAM_P_HALT] = { 0x0008, 0x80, 0x00, 0x00 },
[BAM_P_IRQ_STTS] = { 0x0010, 0x80, 0x00, 0x00 },
[BAM_P_IRQ_CLR] = { 0x0014, 0x80, 0x00, 0x00 },
[BAM_P_IRQ_EN] = { 0x0018, 0x80, 0x00, 0x00 },
[BAM_P_EVNT_DEST_ADDR] = { 0x102C, 0x00, 0x40, 0x00 },
[BAM_P_EVNT_REG] = { 0x1018, 0x00, 0x40, 0x00 },
[BAM_P_SW_OFSTS] = { 0x1000, 0x00, 0x40, 0x00 },
[BAM_P_DATA_FIFO_ADDR] = { 0x1024, 0x00, 0x40, 0x00 },
[BAM_P_DESC_FIFO_ADDR] = { 0x101C, 0x00, 0x40, 0x00 },
[BAM_P_EVNT_GEN_TRSHLD] = { 0x1028, 0x00, 0x40, 0x00 },
[BAM_P_FIFO_SIZES] = { 0x1020, 0x00, 0x40, 0x00 },
};
static const struct reg_offset_data bam_v1_4_reg_info[] = {
[BAM_CTRL] = { 0x0000, 0x00, 0x00, 0x00 },
[BAM_REVISION] = { 0x0004, 0x00, 0x00, 0x00 },
[BAM_NUM_PIPES] = { 0x003C, 0x00, 0x00, 0x00 },
[BAM_DESC_CNT_TRSHLD] = { 0x0008, 0x00, 0x00, 0x00 },
[BAM_IRQ_SRCS] = { 0x000C, 0x00, 0x00, 0x00 },
[BAM_IRQ_SRCS_MSK] = { 0x0010, 0x00, 0x00, 0x00 },
[BAM_IRQ_SRCS_UNMASKED] = { 0x0030, 0x00, 0x00, 0x00 },
[BAM_IRQ_STTS] = { 0x0014, 0x00, 0x00, 0x00 },
[BAM_IRQ_CLR] = { 0x0018, 0x00, 0x00, 0x00 },
[BAM_IRQ_EN] = { 0x001C, 0x00, 0x00, 0x00 },
[BAM_CNFG_BITS] = { 0x007C, 0x00, 0x00, 0x00 },
[BAM_IRQ_SRCS_EE] = { 0x0800, 0x00, 0x00, 0x80 },
[BAM_IRQ_SRCS_MSK_EE] = { 0x0804, 0x00, 0x00, 0x80 },
[BAM_P_CTRL] = { 0x1000, 0x1000, 0x00, 0x00 },
[BAM_P_RST] = { 0x1004, 0x1000, 0x00, 0x00 },
[BAM_P_HALT] = { 0x1008, 0x1000, 0x00, 0x00 },
[BAM_P_IRQ_STTS] = { 0x1010, 0x1000, 0x00, 0x00 },
[BAM_P_IRQ_CLR] = { 0x1014, 0x1000, 0x00, 0x00 },
[BAM_P_IRQ_EN] = { 0x1018, 0x1000, 0x00, 0x00 },
[BAM_P_EVNT_DEST_ADDR] = { 0x102C, 0x00, 0x1000, 0x00 },
[BAM_P_EVNT_REG] = { 0x1018, 0x00, 0x1000, 0x00 },
[BAM_P_SW_OFSTS] = { 0x1000, 0x00, 0x1000, 0x00 },
[BAM_P_DATA_FIFO_ADDR] = { 0x1824, 0x00, 0x1000, 0x00 },
[BAM_P_DESC_FIFO_ADDR] = { 0x181C, 0x00, 0x1000, 0x00 },
[BAM_P_EVNT_GEN_TRSHLD] = { 0x1828, 0x00, 0x1000, 0x00 },
[BAM_P_FIFO_SIZES] = { 0x1820, 0x00, 0x1000, 0x00 },
};
/* BAM CTRL */
#define BAM_SW_RST BIT(0)
@ -297,6 +359,8 @@ struct bam_device {
/* execution environment ID, from DT */
u32 ee;
const struct reg_offset_data *layout;
struct clk *bamclk;
int irq;
@ -304,6 +368,23 @@ struct bam_device {
struct tasklet_struct task;
};
/**
* bam_addr - returns BAM register address
* @bdev: bam device
* @pipe: pipe instance (ignored when register doesn't have multiple instances)
* @reg: register enum
*/
static inline void __iomem *bam_addr(struct bam_device *bdev, u32 pipe,
enum bam_reg reg)
{
const struct reg_offset_data r = bdev->layout[reg];
return bdev->regs + r.base_offset +
r.pipe_mult * pipe +
r.evnt_mult * pipe +
r.ee_mult * bdev->ee;
}
/**
* bam_reset_channel - Reset individual BAM DMA channel
* @bchan: bam channel
@ -317,8 +398,8 @@ static void bam_reset_channel(struct bam_chan *bchan)
lockdep_assert_held(&bchan->vc.lock);
/* reset channel */
writel_relaxed(1, bdev->regs + BAM_P_RST(bchan->id));
writel_relaxed(0, bdev->regs + BAM_P_RST(bchan->id));
writel_relaxed(1, bam_addr(bdev, bchan->id, BAM_P_RST));
writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_RST));
/* don't allow cpu to reorder BAM register accesses done after this */
wmb();
@ -347,17 +428,18 @@ static void bam_chan_init_hw(struct bam_chan *bchan,
* because we allocated 1 more descriptor (8 bytes) than we can use
*/
writel_relaxed(ALIGN(bchan->fifo_phys, sizeof(struct bam_desc_hw)),
bdev->regs + BAM_P_DESC_FIFO_ADDR(bchan->id));
writel_relaxed(BAM_DESC_FIFO_SIZE, bdev->regs +
BAM_P_FIFO_SIZES(bchan->id));
bam_addr(bdev, bchan->id, BAM_P_DESC_FIFO_ADDR));
writel_relaxed(BAM_DESC_FIFO_SIZE,
bam_addr(bdev, bchan->id, BAM_P_FIFO_SIZES));
/* enable the per pipe interrupts, enable EOT, ERR, and INT irqs */
writel_relaxed(P_DEFAULT_IRQS_EN, bdev->regs + BAM_P_IRQ_EN(bchan->id));
writel_relaxed(P_DEFAULT_IRQS_EN,
bam_addr(bdev, bchan->id, BAM_P_IRQ_EN));
/* unmask the specific pipe and EE combo */
val = readl_relaxed(bdev->regs + BAM_IRQ_SRCS_MSK_EE(bdev->ee));
val = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE));
val |= BIT(bchan->id);
writel_relaxed(val, bdev->regs + BAM_IRQ_SRCS_MSK_EE(bdev->ee));
writel_relaxed(val, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE));
/* don't allow cpu to reorder the channel enable done below */
wmb();
@ -367,7 +449,7 @@ static void bam_chan_init_hw(struct bam_chan *bchan,
if (dir == DMA_DEV_TO_MEM)
val |= P_DIRECTION;
writel_relaxed(val, bdev->regs + BAM_P_CTRL(bchan->id));
writel_relaxed(val, bam_addr(bdev, bchan->id, BAM_P_CTRL));
bchan->initialized = 1;
@ -432,12 +514,12 @@ static void bam_free_chan(struct dma_chan *chan)
bchan->fifo_virt = NULL;
/* mask irq for pipe/channel */
val = readl_relaxed(bdev->regs + BAM_IRQ_SRCS_MSK_EE(bdev->ee));
val = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE));
val &= ~BIT(bchan->id);
writel_relaxed(val, bdev->regs + BAM_IRQ_SRCS_MSK_EE(bdev->ee));
writel_relaxed(val, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE));
/* disable irq */
writel_relaxed(0, bdev->regs + BAM_P_IRQ_EN(bchan->id));
writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_IRQ_EN));
}
/**
@ -583,14 +665,14 @@ static int bam_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
switch (cmd) {
case DMA_PAUSE:
spin_lock_irqsave(&bchan->vc.lock, flag);
writel_relaxed(1, bdev->regs + BAM_P_HALT(bchan->id));
writel_relaxed(1, bam_addr(bdev, bchan->id, BAM_P_HALT));
bchan->paused = 1;
spin_unlock_irqrestore(&bchan->vc.lock, flag);
break;
case DMA_RESUME:
spin_lock_irqsave(&bchan->vc.lock, flag);
writel_relaxed(0, bdev->regs + BAM_P_HALT(bchan->id));
writel_relaxed(0, bam_addr(bdev, bchan->id, BAM_P_HALT));
bchan->paused = 0;
spin_unlock_irqrestore(&bchan->vc.lock, flag);
break;
@ -626,7 +708,7 @@ static u32 process_channel_irqs(struct bam_device *bdev)
unsigned long flags;
struct bam_async_desc *async_desc;
srcs = readl_relaxed(bdev->regs + BAM_IRQ_SRCS_EE(bdev->ee));
srcs = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_EE));
/* return early if no pipe/channel interrupts are present */
if (!(srcs & P_IRQ))
@ -639,11 +721,9 @@ static u32 process_channel_irqs(struct bam_device *bdev)
continue;
/* clear pipe irq */
pipe_stts = readl_relaxed(bdev->regs +
BAM_P_IRQ_STTS(i));
pipe_stts = readl_relaxed(bam_addr(bdev, i, BAM_P_IRQ_STTS));
writel_relaxed(pipe_stts, bdev->regs +
BAM_P_IRQ_CLR(i));
writel_relaxed(pipe_stts, bam_addr(bdev, i, BAM_P_IRQ_CLR));
spin_lock_irqsave(&bchan->vc.lock, flags);
async_desc = bchan->curr_txd;
@ -694,12 +774,12 @@ static irqreturn_t bam_dma_irq(int irq, void *data)
tasklet_schedule(&bdev->task);
if (srcs & BAM_IRQ)
clr_mask = readl_relaxed(bdev->regs + BAM_IRQ_STTS);
clr_mask = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_STTS));
/* don't allow reorder of the various accesses to the BAM registers */
mb();
writel_relaxed(clr_mask, bdev->regs + BAM_IRQ_CLR);
writel_relaxed(clr_mask, bam_addr(bdev, 0, BAM_IRQ_CLR));
return IRQ_HANDLED;
}
@ -763,7 +843,7 @@ static void bam_apply_new_config(struct bam_chan *bchan,
else
maxburst = bchan->slave.dst_maxburst;
writel_relaxed(maxburst, bdev->regs + BAM_DESC_CNT_TRSHLD);
writel_relaxed(maxburst, bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD));
bchan->reconfigure = 0;
}
@ -830,7 +910,7 @@ static void bam_start_dma(struct bam_chan *bchan)
/* ensure descriptor writes and dma start not reordered */
wmb();
writel_relaxed(bchan->tail * sizeof(struct bam_desc_hw),
bdev->regs + BAM_P_EVNT_REG(bchan->id));
bam_addr(bdev, bchan->id, BAM_P_EVNT_REG));
}
/**
@ -918,43 +998,44 @@ static int bam_init(struct bam_device *bdev)
u32 val;
/* read revision and configuration information */
val = readl_relaxed(bdev->regs + BAM_REVISION) >> NUM_EES_SHIFT;
val = readl_relaxed(bam_addr(bdev, 0, BAM_REVISION)) >> NUM_EES_SHIFT;
val &= NUM_EES_MASK;
/* check that configured EE is within range */
if (bdev->ee >= val)
return -EINVAL;
val = readl_relaxed(bdev->regs + BAM_NUM_PIPES);
val = readl_relaxed(bam_addr(bdev, 0, BAM_NUM_PIPES));
bdev->num_channels = val & BAM_NUM_PIPES_MASK;
/* s/w reset bam */
/* after reset all pipes are disabled and idle */
val = readl_relaxed(bdev->regs + BAM_CTRL);
val = readl_relaxed(bam_addr(bdev, 0, BAM_CTRL));
val |= BAM_SW_RST;
writel_relaxed(val, bdev->regs + BAM_CTRL);
writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL));
val &= ~BAM_SW_RST;
writel_relaxed(val, bdev->regs + BAM_CTRL);
writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL));
/* make sure previous stores are visible before enabling BAM */
wmb();
/* enable bam */
val |= BAM_EN;
writel_relaxed(val, bdev->regs + BAM_CTRL);
writel_relaxed(val, bam_addr(bdev, 0, BAM_CTRL));
/* set descriptor threshhold, start with 4 bytes */
writel_relaxed(DEFAULT_CNT_THRSHLD, bdev->regs + BAM_DESC_CNT_TRSHLD);
writel_relaxed(DEFAULT_CNT_THRSHLD,
bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD));
/* Enable default set of h/w workarounds, ie all except BAM_FULL_PIPE */
writel_relaxed(BAM_CNFG_BITS_DEFAULT, bdev->regs + BAM_CNFG_BITS);
writel_relaxed(BAM_CNFG_BITS_DEFAULT, bam_addr(bdev, 0, BAM_CNFG_BITS));
/* enable irqs for errors */
writel_relaxed(BAM_ERROR_EN | BAM_HRESP_ERR_EN,
bdev->regs + BAM_IRQ_EN);
bam_addr(bdev, 0, BAM_IRQ_EN));
/* unmask global bam interrupt */
writel_relaxed(BAM_IRQ_MSK, bdev->regs + BAM_IRQ_SRCS_MSK_EE(bdev->ee));
writel_relaxed(BAM_IRQ_MSK, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE));
return 0;
}
@ -969,9 +1050,18 @@ static void bam_channel_init(struct bam_device *bdev, struct bam_chan *bchan,
bchan->vc.desc_free = bam_dma_free_desc;
}
static const struct of_device_id bam_of_match[] = {
{ .compatible = "qcom,bam-v1.3.0", .data = &bam_v1_3_reg_info },
{ .compatible = "qcom,bam-v1.4.0", .data = &bam_v1_4_reg_info },
{}
};
MODULE_DEVICE_TABLE(of, bam_of_match);
static int bam_dma_probe(struct platform_device *pdev)
{
struct bam_device *bdev;
const struct of_device_id *match;
struct resource *iores;
int ret, i;
@ -981,6 +1071,14 @@ static int bam_dma_probe(struct platform_device *pdev)
bdev->dev = &pdev->dev;
match = of_match_node(bam_of_match, pdev->dev.of_node);
if (!match) {
dev_err(&pdev->dev, "Unsupported BAM module\n");
return -ENODEV;
}
bdev->layout = match->data;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
bdev->regs = devm_ioremap_resource(&pdev->dev, iores);
if (IS_ERR(bdev->regs))
@ -1084,7 +1182,7 @@ static int bam_dma_remove(struct platform_device *pdev)
dma_async_device_unregister(&bdev->common);
/* mask all interrupts for this execution environment */
writel_relaxed(0, bdev->regs + BAM_IRQ_SRCS_MSK_EE(bdev->ee));
writel_relaxed(0, bam_addr(bdev, 0, BAM_IRQ_SRCS_MSK_EE));
devm_free_irq(bdev->dev, bdev->irq, bdev);
@ -1104,18 +1202,11 @@ static int bam_dma_remove(struct platform_device *pdev)
return 0;
}
static const struct of_device_id bam_of_match[] = {
{ .compatible = "qcom,bam-v1.4.0", },
{}
};
MODULE_DEVICE_TABLE(of, bam_of_match);
static struct platform_driver bam_dma_driver = {
.probe = bam_dma_probe,
.remove = bam_dma_remove,
.driver = {
.name = "bam-dma-engine",
.owner = THIS_MODULE,
.of_match_table = bam_of_match,
},
};

1
drivers/dma/s3c24xx-dma.c
Просмотреть файл

@ -1402,7 +1402,6 @@ static int s3c24xx_dma_remove(struct platform_device *pdev)
static struct platform_driver s3c24xx_dma_driver = {
.driver = {
.name = "s3c24xx-dma",
.owner = THIS_MODULE,
},
.id_table = s3c24xx_dma_driver_ids,
.probe = s3c24xx_dma_probe,

3
drivers/dma/sa11x0-dma.c
Просмотреть файл

@ -829,7 +829,6 @@ static int sa11x0_dma_init_dmadev(struct dma_device *dmadev,
{
unsigned i;
dmadev->chancnt = ARRAY_SIZE(chan_desc);
INIT_LIST_HEAD(&dmadev->channels);
dmadev->dev = dev;
dmadev->device_alloc_chan_resources = sa11x0_dma_alloc_chan_resources;
@ -838,7 +837,7 @@ static int sa11x0_dma_init_dmadev(struct dma_device *dmadev,
dmadev->device_tx_status = sa11x0_dma_tx_status;
dmadev->device_issue_pending = sa11x0_dma_issue_pending;
for (i = 0; i < dmadev->chancnt; i++) {
for (i = 0; i < ARRAY_SIZE(chan_desc); i++) {
struct sa11x0_dma_chan *c;
c = kzalloc(sizeof(*c), GFP_KERNEL);

3
drivers/dma/sh/rcar-audmapp.c
Просмотреть файл

@ -253,7 +253,6 @@ static int audmapp_chan_probe(struct platform_device *pdev,
static void audmapp_chan_remove(struct audmapp_device *audev)
{
struct dma_device *dma_dev = &audev->shdma_dev.dma_dev;
struct shdma_chan *schan;
int i;
@ -261,7 +260,6 @@ static void audmapp_chan_remove(struct audmapp_device *audev)
BUG_ON(!schan);
shdma_chan_remove(schan);
}
dma_dev->chancnt = 0;
}
static struct dma_chan *audmapp_of_xlate(struct of_phandle_args *dma_spec,
@ -367,7 +365,6 @@ static struct platform_driver audmapp_driver = {
.probe = audmapp_probe,
.remove = audmapp_remove,
.driver = {
.owner = THIS_MODULE,
.name = "rcar-audmapp-engine",
.of_match_table = audmapp_of_match,
},

3
drivers/dma/sh/rcar-hpbdma.c
Просмотреть файл

@ -619,7 +619,6 @@ error:
static void hpb_dmae_chan_remove(struct hpb_dmae_device *hpbdev)
{
struct dma_device *dma_dev = &hpbdev->shdma_dev.dma_dev;
struct shdma_chan *schan;
int i;
@ -628,7 +627,6 @@ static void hpb_dmae_chan_remove(struct hpb_dmae_device *hpbdev)
shdma_chan_remove(schan);
}
dma_dev->chancnt = 0;
}
static int hpb_dmae_remove(struct platform_device *pdev)
@ -655,7 +653,6 @@ static struct platform_driver hpb_dmae_driver = {
.remove = hpb_dmae_remove,
.shutdown = hpb_dmae_shutdown,
.driver = {
.owner = THIS_MODULE,
.name = "hpb-dma-engine",
},
};

4
drivers/dma/sh/shdma-base.c
Просмотреть файл

@ -391,6 +391,8 @@ static dma_async_tx_callback __ld_cleanup(struct shdma_chan *schan, bool all)
dev_dbg(schan->dev, "Bring down channel %d\n", schan->id);
pm_runtime_put(schan->dev);
schan->pm_state = SHDMA_PM_ESTABLISHED;
} else if (schan->pm_state == SHDMA_PM_PENDING) {
shdma_chan_xfer_ld_queue(schan);
}
}
}
@ -951,7 +953,7 @@ void shdma_chan_probe(struct shdma_dev *sdev,
/* Add the channel to DMA device channel list */
list_add_tail(&schan->dma_chan.device_node,
&sdev->dma_dev.channels);
sdev->schan[sdev->dma_dev.chancnt++] = schan;
sdev->schan[id] = schan;
}
EXPORT_SYMBOL(shdma_chan_probe);

1
drivers/dma/sh/shdma-of.c
Просмотреть файл

@ -66,7 +66,6 @@ MODULE_DEVICE_TABLE(of, sh_dmae_of_match);
static struct platform_driver shdma_of = {
.driver = {
.owner = THIS_MODULE,
.name = "shdma-of",
.of_match_table = shdma_of_match,
},

2
drivers/dma/sh/shdmac.c
Просмотреть файл

@ -572,7 +572,6 @@ err_no_irq:
static void sh_dmae_chan_remove(struct sh_dmae_device *shdev)
{
struct dma_device *dma_dev = &shdev->shdma_dev.dma_dev;
struct shdma_chan *schan;
int i;
@ -581,7 +580,6 @@ static void sh_dmae_chan_remove(struct sh_dmae_device *shdev)
shdma_chan_remove(schan);
}
dma_dev->chancnt = 0;
}
static void sh_dmae_shutdown(struct platform_device *pdev)

3
drivers/dma/sh/sudmac.c
Просмотреть файл

@ -295,7 +295,6 @@ err_no_irq:
static void sudmac_chan_remove(struct sudmac_device *su_dev)
{
struct dma_device *dma_dev = &su_dev->shdma_dev.dma_dev;
struct shdma_chan *schan;
int i;
@ -304,7 +303,6 @@ static void sudmac_chan_remove(struct sudmac_device *su_dev)
shdma_chan_remove(schan);
}
dma_dev->chancnt = 0;
}
static dma_addr_t sudmac_slave_addr(struct shdma_chan *schan)
@ -411,7 +409,6 @@ static int sudmac_remove(struct platform_device *pdev)
static struct platform_driver sudmac_driver = {
.driver = {
.owner = THIS_MODULE,
.name = SUDMAC_DRV_NAME,
},
.probe = sudmac_probe,

5
drivers/dma/sirf-dma.c
Просмотреть файл

@ -735,7 +735,6 @@ static int sirfsoc_dma_probe(struct platform_device *op)
dma = &sdma->dma;
dma->dev = dev;
dma->chancnt = SIRFSOC_DMA_CHANNELS;
dma->device_alloc_chan_resources = sirfsoc_dma_alloc_chan_resources;
dma->device_free_chan_resources = sirfsoc_dma_free_chan_resources;
@ -752,7 +751,7 @@ static int sirfsoc_dma_probe(struct platform_device *op)
dma_cap_set(DMA_INTERLEAVE, dma->cap_mask);
dma_cap_set(DMA_PRIVATE, dma->cap_mask);
for (i = 0; i < dma->chancnt; i++) {
for (i = 0; i < SIRFSOC_DMA_CHANNELS; i++) {
schan = &sdma->channels[i];
schan->chan.device = dma;
@ -835,6 +834,7 @@ static int sirfsoc_dma_runtime_resume(struct device *dev)
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int sirfsoc_dma_pm_suspend(struct device *dev)
{
struct sirfsoc_dma *sdma = dev_get_drvdata(dev);
@ -916,6 +916,7 @@ static int sirfsoc_dma_pm_resume(struct device *dev)
return 0;
}
#endif
static const struct dev_pm_ops sirfsoc_dma_pm_ops = {
SET_RUNTIME_PM_OPS(sirfsoc_dma_runtime_suspend, sirfsoc_dma_runtime_resume, NULL)

1
drivers/dma/ste_dma40.c
Просмотреть файл

@ -3432,6 +3432,7 @@ static int __init d40_lcla_allocate(struct d40_base *base)
d40_err(base->dev, "Failed to allocate %d pages.\n",
base->lcla_pool.pages);
ret = -ENOMEM;
for (j = 0; j < i; j++)
free_pages(page_list[j], base->lcla_pool.pages);

122
drivers/dma/sun6i-dma.c
Просмотреть файл

@ -18,6 +18,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of_dma.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/slab.h>
@ -25,24 +26,6 @@
#include "virt-dma.h"
/*
* There's 16 physical channels that can work in parallel.
*
* However we have 30 different endpoints for our requests.
*
* Since the channels are able to handle only an unidirectional
* transfer, we need to allocate more virtual channels so that
* everyone can grab one channel.
*
* Some devices can't work in both direction (mostly because it
* wouldn't make sense), so we have a bit fewer virtual channels than
* 2 channels per endpoints.
*/
#define NR_MAX_CHANNELS 16
#define NR_MAX_REQUESTS 30
#define NR_MAX_VCHANS 53
/*
* Common registers
*/
@ -59,6 +42,12 @@
#define DMA_STAT 0x30
/*
* sun8i specific registers
*/
#define SUN8I_DMA_GATE 0x20
#define SUN8I_DMA_GATE_ENABLE 0x4
/*
* Channels specific registers
*/
@ -101,6 +90,19 @@
#define NORMAL_WAIT 8
#define DRQ_SDRAM 1
/*
* Hardware channels / ports representation
*
* The hardware is used in several SoCs, with differing numbers
* of channels and endpoints. This structure ties those numbers
* to a certain compatible string.
*/
struct sun6i_dma_config {
u32 nr_max_channels;
u32 nr_max_requests;
u32 nr_max_vchans;
};
/*
* Hardware representation of the LLI
*
@ -159,6 +161,7 @@ struct sun6i_dma_dev {
struct dma_pool *pool;
struct sun6i_pchan *pchans;
struct sun6i_vchan *vchans;
const struct sun6i_dma_config *cfg;
};
static struct device *chan2dev(struct dma_chan *chan)
@ -426,6 +429,7 @@ static int sun6i_dma_start_desc(struct sun6i_vchan *vchan)
static void sun6i_dma_tasklet(unsigned long data)
{
struct sun6i_dma_dev *sdev = (struct sun6i_dma_dev *)data;
const struct sun6i_dma_config *cfg = sdev->cfg;
struct sun6i_vchan *vchan;
struct sun6i_pchan *pchan;
unsigned int pchan_alloc = 0;
@ -453,7 +457,7 @@ static void sun6i_dma_tasklet(unsigned long data)
}
spin_lock_irq(&sdev->lock);
for (pchan_idx = 0; pchan_idx < NR_MAX_CHANNELS; pchan_idx++) {
for (pchan_idx = 0; pchan_idx < cfg->nr_max_channels; pchan_idx++) {
pchan = &sdev->pchans[pchan_idx];
if (pchan->vchan || list_empty(&sdev->pending))
@ -474,7 +478,7 @@ static void sun6i_dma_tasklet(unsigned long data)
}
spin_unlock_irq(&sdev->lock);
for (pchan_idx = 0; pchan_idx < NR_MAX_CHANNELS; pchan_idx++) {
for (pchan_idx = 0; pchan_idx < cfg->nr_max_channels; pchan_idx++) {
if (!(pchan_alloc & BIT(pchan_idx)))
continue;
@ -496,7 +500,7 @@ static irqreturn_t sun6i_dma_interrupt(int irq, void *dev_id)
int i, j, ret = IRQ_NONE;
u32 status;
for (i = 0; i < 2; i++) {
for (i = 0; i < sdev->cfg->nr_max_channels / DMA_IRQ_CHAN_NR; i++) {
status = readl(sdev->base + DMA_IRQ_STAT(i));
if (!status)
continue;
@ -506,7 +510,7 @@ static irqreturn_t sun6i_dma_interrupt(int irq, void *dev_id)
writel(status, sdev->base + DMA_IRQ_STAT(i));
for (j = 0; (j < 8) && status; j++) {
for (j = 0; (j < DMA_IRQ_CHAN_NR) && status; j++) {
if (status & DMA_IRQ_QUEUE) {
pchan = sdev->pchans + j;
vchan = pchan->vchan;
@ -519,7 +523,7 @@ static irqreturn_t sun6i_dma_interrupt(int irq, void *dev_id)
}
}
status = status >> 4;
status = status >> DMA_IRQ_CHAN_WIDTH;
}
if (!atomic_read(&sdev->tasklet_shutdown))
@ -815,7 +819,7 @@ static struct dma_chan *sun6i_dma_of_xlate(struct of_phandle_args *dma_spec,
struct dma_chan *chan;
u8 port = dma_spec->args[0];
if (port > NR_MAX_REQUESTS)
if (port > sdev->cfg->nr_max_requests)
return NULL;
chan = dma_get_any_slave_channel(&sdev->slave);
@ -848,7 +852,7 @@ static inline void sun6i_dma_free(struct sun6i_dma_dev *sdev)
{
int i;
for (i = 0; i < NR_MAX_VCHANS; i++) {
for (i = 0; i < sdev->cfg->nr_max_vchans; i++) {
struct sun6i_vchan *vchan = &sdev->vchans[i];
list_del(&vchan->vc.chan.device_node);
@ -856,8 +860,48 @@ static inline void sun6i_dma_free(struct sun6i_dma_dev *sdev)
}
}
/*
* For A31:
*
* There's 16 physical channels that can work in parallel.
*
* However we have 30 different endpoints for our requests.
*
* Since the channels are able to handle only an unidirectional
* transfer, we need to allocate more virtual channels so that
* everyone can grab one channel.
*
* Some devices can't work in both direction (mostly because it
* wouldn't make sense), so we have a bit fewer virtual channels than
* 2 channels per endpoints.
*/
static struct sun6i_dma_config sun6i_a31_dma_cfg = {
.nr_max_channels = 16,
.nr_max_requests = 30,
.nr_max_vchans = 53,
};
/*
* The A23 only has 8 physical channels, a maximum DRQ port id of 24,
* and a total of 37 usable source and destination endpoints.
*/
static struct sun6i_dma_config sun8i_a23_dma_cfg = {
.nr_max_channels = 8,
.nr_max_requests = 24,
.nr_max_vchans = 37,
};
static struct of_device_id sun6i_dma_match[] = {
{ .compatible = "allwinner,sun6i-a31-dma", .data = &sun6i_a31_dma_cfg },
{ .compatible = "allwinner,sun8i-a23-dma", .data = &sun8i_a23_dma_cfg },
{ /* sentinel */ }
};
static int sun6i_dma_probe(struct platform_device *pdev)
{
const struct of_device_id *device;
struct sun6i_dma_dev *sdc;
struct resource *res;
int ret, i;
@ -866,6 +910,11 @@ static int sun6i_dma_probe(struct platform_device *pdev)
if (!sdc)
return -ENOMEM;
device = of_match_device(sun6i_dma_match, &pdev->dev);
if (!device)
return -ENODEV;
sdc->cfg = device->data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
sdc->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(sdc->base))
@ -912,31 +961,30 @@ static int sun6i_dma_probe(struct platform_device *pdev)
sdc->slave.device_prep_slave_sg = sun6i_dma_prep_slave_sg;
sdc->slave.device_prep_dma_memcpy = sun6i_dma_prep_dma_memcpy;
sdc->slave.device_control = sun6i_dma_control;
sdc->slave.chancnt = NR_MAX_VCHANS;
sdc->slave.copy_align = 4;
sdc->slave.dev = &pdev->dev;
sdc->pchans = devm_kcalloc(&pdev->dev, NR_MAX_CHANNELS,
sdc->pchans = devm_kcalloc(&pdev->dev, sdc->cfg->nr_max_channels,
sizeof(struct sun6i_pchan), GFP_KERNEL);
if (!sdc->pchans)
return -ENOMEM;
sdc->vchans = devm_kcalloc(&pdev->dev, NR_MAX_VCHANS,
sdc->vchans = devm_kcalloc(&pdev->dev, sdc->cfg->nr_max_vchans,
sizeof(struct sun6i_vchan), GFP_KERNEL);
if (!sdc->vchans)
return -ENOMEM;
tasklet_init(&sdc->task, sun6i_dma_tasklet, (unsigned long)sdc);
for (i = 0; i < NR_MAX_CHANNELS; i++) {
for (i = 0; i < sdc->cfg->nr_max_channels; i++) {
struct sun6i_pchan *pchan = &sdc->pchans[i];
pchan->idx = i;
pchan->base = sdc->base + 0x100 + i * 0x40;
}
for (i = 0; i < NR_MAX_VCHANS; i++) {
for (i = 0; i < sdc->cfg->nr_max_vchans; i++) {
struct sun6i_vchan *vchan = &sdc->vchans[i];
INIT_LIST_HEAD(&vchan->node);
@ -976,6 +1024,15 @@ static int sun6i_dma_probe(struct platform_device *pdev)
goto err_dma_unregister;
}
/*
* sun8i variant requires us to toggle a dma gating register,
* as seen in Allwinner's SDK. This register is not documented
* in the A23 user manual.
*/
if (of_device_is_compatible(pdev->dev.of_node,
"allwinner,sun8i-a23-dma"))
writel(SUN8I_DMA_GATE_ENABLE, sdc->base + SUN8I_DMA_GATE);
return 0;
err_dma_unregister:
@ -1008,11 +1065,6 @@ static int sun6i_dma_remove(struct platform_device *pdev)
return 0;
}
static struct of_device_id sun6i_dma_match[] = {
{ .compatible = "allwinner,sun6i-a31-dma" },
{ /* sentinel */ }
};
static struct platform_driver sun6i_dma_driver = {
.probe = sun6i_dma_probe,
.remove = sun6i_dma_remove,

1
drivers/dma/tegra20-apb-dma.c
Просмотреть файл

@ -1597,7 +1597,6 @@ static const struct dev_pm_ops tegra_dma_dev_pm_ops = {
static struct platform_driver tegra_dmac_driver = {
.driver = {
.name = "tegra-apbdma",
.owner = THIS_MODULE,
.pm = &tegra_dma_dev_pm_ops,
.of_match_table = tegra_dma_of_match,
},

1
drivers/dma/timb_dma.c
Просмотреть файл

@ -783,7 +783,6 @@ static int td_remove(struct platform_device *pdev)
static struct platform_driver td_driver = {
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
},
.probe = td_probe,
.remove = td_remove,

7
drivers/dma/xilinx/xilinx_vdma.c
Просмотреть файл

@ -942,6 +942,9 @@ xilinx_vdma_dma_prep_interleaved(struct dma_chan *dchan,
if (!xt->numf || !xt->sgl[0].size)
return NULL;
if (xt->frame_size != 1)
return NULL;
/* Allocate a transaction descriptor. */
desc = xilinx_vdma_alloc_tx_descriptor(chan);
if (!desc)
@ -960,7 +963,7 @@ xilinx_vdma_dma_prep_interleaved(struct dma_chan *dchan,
hw = &segment->hw;
hw->vsize = xt->numf;
hw->hsize = xt->sgl[0].size;
hw->stride = xt->sgl[0].icg <<
hw->stride = (xt->sgl[0].icg + xt->sgl[0].size) <<
XILINX_VDMA_FRMDLY_STRIDE_STRIDE_SHIFT;
hw->stride |= chan->config.frm_dly <<
XILINX_VDMA_FRMDLY_STRIDE_FRMDLY_SHIFT;
@ -971,9 +974,11 @@ xilinx_vdma_dma_prep_interleaved(struct dma_chan *dchan,
hw->buf_addr = xt->src_start;
/* Link the previous next descriptor to current */
if (!list_empty(&desc->segments)) {
prev = list_last_entry(&desc->segments,
struct xilinx_vdma_tx_segment, node);
prev->hw.next_desc = segment->phys;
}
/* Insert the segment into the descriptor segments list. */
list_add_tail(&segment->node, &desc->segments);

25
include/dt-bindings/dma/at91.h
Просмотреть файл

@ -9,6 +9,8 @@
#ifndef __DT_BINDINGS_AT91_DMA_H__
#define __DT_BINDINGS_AT91_DMA_H__
/* ---------- HDMAC ---------- */
/*
* Source and/or destination peripheral ID
*/
@ -24,4 +26,27 @@
#define AT91_DMA_CFG_FIFOCFG_ALAP (0x1 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* largest defined AHB burst */
#define AT91_DMA_CFG_FIFOCFG_ASAP (0x2 << AT91_DMA_CFG_FIFOCFG_OFFSET) /* single AHB access */
/* ---------- XDMAC ---------- */
#define AT91_XDMAC_DT_MEM_IF_MASK (0x1)
#define AT91_XDMAC_DT_MEM_IF_OFFSET (13)
#define AT91_XDMAC_DT_MEM_IF(mem_if) (((mem_if) & AT91_XDMAC_DT_MEM_IF_MASK) \
<< AT91_XDMAC_DT_MEM_IF_OFFSET)
#define AT91_XDMAC_DT_GET_MEM_IF(cfg) (((cfg) >> AT91_XDMAC_DT_MEM_IF_OFFSET) \
& AT91_XDMAC_DT_MEM_IF_MASK)
#define AT91_XDMAC_DT_PER_IF_MASK (0x1)
#define AT91_XDMAC_DT_PER_IF_OFFSET (14)
#define AT91_XDMAC_DT_PER_IF(per_if) (((per_if) & AT91_XDMAC_DT_PER_IF_MASK) \
<< AT91_XDMAC_DT_PER_IF_OFFSET)
#define AT91_XDMAC_DT_GET_PER_IF(cfg) (((cfg) >> AT91_XDMAC_DT_PER_IF_OFFSET) \
& AT91_XDMAC_DT_PER_IF_MASK)
#define AT91_XDMAC_DT_PERID_MASK (0x7f)
#define AT91_XDMAC_DT_PERID_OFFSET (24)
#define AT91_XDMAC_DT_PERID(perid) (((perid) & AT91_XDMAC_DT_PERID_MASK) \
<< AT91_XDMAC_DT_PERID_OFFSET)
#define AT91_XDMAC_DT_GET_PERID(cfg) (((cfg) >> AT91_XDMAC_DT_PERID_OFFSET) \
& AT91_XDMAC_DT_PERID_MASK)
#endif /* __DT_BINDINGS_AT91_DMA_H__ */

3
include/linux/dmaengine.h
Просмотреть файл

@ -447,7 +447,8 @@ struct dmaengine_unmap_data {
* communicate status
* @phys: physical address of the descriptor
* @chan: target channel for this operation
* @tx_submit: set the prepared descriptor(s) to be executed by the engine
* @tx_submit: accept the descriptor, assign ordered cookie and mark the
* descriptor pending. To be pushed on .issue_pending() call
* @callback: routine to call after this operation is complete
* @callback_param: general parameter to pass to the callback routine
* ---async_tx api specific fields---

1
include/linux/platform_data/dma-imx.h
Просмотреть файл

@ -41,6 +41,7 @@ enum sdma_peripheral_type {
IMX_DMATYPE_ESAI, /* ESAI */
IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */
IMX_DMATYPE_ASRC_SP, /* Shared ASRC */
IMX_DMATYPE_SAI, /* SAI */
};
enum imx_dma_prio {