microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

ARM: dts: sun7i: Remove card detect pull-up 

Boards usually have an external pull-up on the card-detect signal, so
there's no need to add another one.

This also removes a DTC warning.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
This commit is contained in:
Maxime Ripard 2018-11-20 21:03:20 +01:00
Родитель 054da074b1
Коммит 8860687aac
Не найден ключ, соответствующий данной подписи
Идентификатор ключа GPG: E3EF0D6F671851C5
8 изменённых файлов: 9 добавлений и 67 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

10
arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
Просмотреть файл

@ -175,7 +175,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>;
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
@ -220,14 +220,6 @@
status = "okay";
};
&pio {
mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 {
pins = "PH10";
function = "gpio_in";
bias-pull-up;
};
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;

8
arch/arm/boot/dts/sun7i-a20-bananapi.dts
Просмотреть файл

@ -177,7 +177,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
@ -253,12 +253,6 @@
function = "gpio_in";
bias-pull-up;
};
mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
pins = "PH10";
function = "gpio_in";
bias-pull-up;
};
};
#include "axp209.dtsi"

10
arch/arm/boot/dts/sun7i-a20-bananapro.dts
Просмотреть файл

@ -149,7 +149,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
@ -182,14 +182,6 @@
status = "okay";
};
&pio {
mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
pins = "PH10";
function = "gpio_in";
bias-pull-up;
};
};
&reg_usb1_vbus {
gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
status = "okay";

8
arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
Просмотреть файл

@ -220,7 +220,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>;
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
@ -241,12 +241,6 @@
function = "gpio_in";
bias-pull-up;
};
mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {
pins = "PH10";
function = "gpio_in";
bias-pull-up;
};
};
#include "axp209.dtsi"

8
arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
Просмотреть файл

@ -219,7 +219,7 @@
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>;
pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */
@ -244,12 +244,6 @@
function = "gpio_out";
drive-strength = <20>;
};
mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 {
pins = "PH0";
function = "gpio_in";
bias-pull-up;
};
};
&reg_ahci_5v {

8
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
Просмотреть файл

@ -232,7 +232,7 @@
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
@ -257,12 +257,6 @@
function = "gmac";
};
mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
pins = "PH11";
function = "gpio_in";
bias-pull-up;
};
led_pins_olinuxino: led_pins@0 {
pins = "PH2";
function = "gpio_out";

16
arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
Просмотреть файл

@ -162,7 +162,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
@ -171,7 +171,7 @@
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>;
pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
@ -188,18 +188,6 @@
function = "gpio_in";
bias-pull-up;
};
mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
pins = "PH10";
function = "gpio_in";
bias-pull-up;
};
mmc3_cd_pin_orangepi: mmc3_cd_pin@0 {
pins = "PH11";
function = "gpio_in";
bias-pull-up;
};
};
&reg_dcdc2 {

8
arch/arm/boot/dts/sun7i-a20-orangepi.dts
Просмотреть файл

@ -128,7 +128,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
@ -145,12 +145,6 @@
function = "gpio_in";
bias-pull-up;
};
mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
pins = "PH10";
function = "gpio_in";
bias-pull-up;
};
};
&reg_dcdc2 {