diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 69880560c0f0..849834cb1766 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -41,6 +41,10 @@ Boards with the Amlogic Meson GXL S905D SoC shall have the following properties: Required root node property: compatible: "amlogic,s905d", "amlogic,meson-gxl"; +Boards with the Amlogic Meson GXL S805X SoC shall have the following properties: + Required root node property: + compatible: "amlogic,s805x", "amlogic,meson-gxl"; + Boards with the Amlogic Meson GXM S912 SoC shall have the following properties: Required root node property: compatible: "amlogic,s912", "amlogic,meson-gxm"; @@ -79,6 +83,8 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,p230" (Meson gxl s905d) - "amlogic,p231" (Meson gxl s905d) + - "amlogic,p241" (Meson gxl s805x) + - "amlogic,q200" (Meson gxm s912) - "amlogic,q201" (Meson gxm s912) - "khadas,vim2" (Meson gxm s912) diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 34dd0e9b5cbb..4dcffb0e3536 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -17,6 +17,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index dff9b15eb3c0..fd90fa4a282c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -6,16 +6,67 @@ /dts-v1/; #include "meson-axg.dtsi" +#include / { compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg"; model = "Amlogic Meson AXG S400 Development Board"; + adc_keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + button-next { + label = "Next"; + linux,code = ; + press-threshold-microvolt = <1116000>; /* 62% */ + }; + + button-prev { + label = "Previous"; + linux,code = ; + press-threshold-microvolt = <900000>; /* 50% */ + }; + + button-wifi { + label = "Wifi"; + linux,code = ; + press-threshold-microvolt = <684000>; /* 38% */ + }; + + button-up { + label = "Volume Up"; + linux,code = ; + press-threshold-microvolt = <468000>; /* 26% */ + }; + + button-down { + label = "Volume Down"; + linux,code = ; + press-threshold-microvolt = <252000>; /* 14% */ + }; + + button-voice { + label = "Voice"; + linux,code = ; + press-threshold-microvolt = <0>; /* 0% */ + }; + }; + aliases { serial0 = &uart_AO; serial1 = &uart_A; }; + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; @@ -62,6 +113,40 @@ clock-frequency = <32768>; pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ }; + + speaker-leds { + compatible = "gpio-leds"; + + aled1 { + label = "speaker:aled1"; + gpios = <&gpio_speaker 7 0>; + }; + + aled2 { + label = "speaker:aled2"; + gpios = <&gpio_speaker 6 0>; + }; + + aled3 { + label = "speaker:aled3"; + gpios = <&gpio_speaker 5 0>; + }; + + aled4 { + label = "speaker:aled4"; + gpios = <&gpio_speaker 4 0>; + }; + + aled5 { + label = "speaker:aled5"; + gpios = <&gpio_speaker 3 0>; + }; + + aled6 { + label = "speaker:aled6"; + gpios = <&gpio_speaker 2 0>; + }; + }; }; ðmac { @@ -106,12 +191,33 @@ status = "okay"; pinctrl-0 = <&i2c1_z_pins>; pinctrl-names = "default"; + + speaker_amp1: audio-codec@1b { + compatible = "ti,tas5707"; + reg = <0x1b>; + reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + AVDD-supply = <&vcc_3v3>; + DVDD-supply = <&vcc_3v3>; + PVDD_A-supply = <&main_12v>; + PVDD_B-supply = <&main_12v>; + PVDD_C-supply = <&main_12v>; + PVDD_D-supply = <&main_12v>; + }; }; &i2c_AO { status = "okay"; pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; pinctrl-names = "default"; + + gpio_speaker: gpio-controller@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&vddao_3v3>; + }; }; &pwm_ab { @@ -166,3 +272,8 @@ compatible = "brcm,bcm4329-fmac"; }; }; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 67d7115e4eff..461be4a35f92 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -477,6 +477,48 @@ }; }; + pdm_dclk_a14_pins: pdm_dclk_a14 { + mux { + groups = "pdm_dclk_a14"; + function = "pdm"; + }; + }; + + pdm_dclk_a19_pins: pdm_dclk_a19 { + mux { + groups = "pdm_dclk_a19"; + function = "pdm"; + }; + }; + + pdm_din0_pins: pdm_din0 { + mux { + groups = "pdm_din0"; + function = "pdm"; + }; + }; + + pdm_din1_pins: pdm_din1 { + mux { + groups = "pdm_din1"; + function = "pdm"; + }; + }; + + pdm_din2_pins: pdm_din2 { + mux { + groups = "pdm_din2"; + function = "pdm"; + }; + }; + + pdm_din3_pins: pdm_din3 { + mux { + groups = "pdm_din3"; + function = "pdm"; + }; + }; + pwm_a_a_pins: pwm_a_a { mux { groups = "pwm_a_a"; @@ -561,6 +603,76 @@ }; }; + spdif_in_z_pins: spdif_in_z { + mux { + groups = "spdif_in_z"; + function = "spdif_in"; + }; + }; + + spdif_in_a1_pins: spdif_in_a1 { + mux { + groups = "spdif_in_a1"; + function = "spdif_in"; + }; + }; + + spdif_in_a7_pins: spdif_in_a7 { + mux { + groups = "spdif_in_a7"; + function = "spdif_in"; + }; + }; + + spdif_in_a19_pins: spdif_in_a19 { + mux { + groups = "spdif_in_a19"; + function = "spdif_in"; + }; + }; + + spdif_in_a20_pins: spdif_in_a20 { + mux { + groups = "spdif_in_a20"; + function = "spdif_in"; + }; + }; + + spdif_out_z_pins: spdif_out_z { + mux { + groups = "spdif_out_z"; + function = "spdif_out"; + }; + }; + + spdif_out_a1_pins: spdif_out_a1 { + mux { + groups = "spdif_out_a1"; + function = "spdif_out"; + }; + }; + + spdif_out_a11_pins: spdif_out_a11 { + mux { + groups = "spdif_out_a11"; + function = "spdif_out"; + }; + }; + + spdif_out_a19_pins: spdif_out_a19 { + mux { + groups = "spdif_out_a19"; + function = "spdif_out"; + }; + }; + + spdif_out_a20_pins: spdif_out_a20 { + mux { + groups = "spdif_out_a20"; + function = "spdif_out"; + }; + }; + spi0_pins: spi0 { mux { groups = "spi0_miso", @@ -1194,6 +1306,20 @@ interrupts = ; status = "disabled"; }; + + saradc: adc@9000 { + compatible = "amlogic,meson-axg-saradc", + "amlogic,meson-saradc"; + reg = <0x0 0x9000 0x0 0x38>; + #io-channel-cells = <1>; + interrupts = ; + clocks = <&xtal>, + <&clkc_AO CLKID_AO_SAR_ADC>, + <&clkc_AO CLKID_AO_SAR_ADC_CLK>, + <&clkc_AO CLKID_AO_SAR_ADC_SEL>; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 88e712ea757a..765247bc4f24 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -35,6 +35,13 @@ regulator-always-on; }; + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; @@ -140,6 +147,11 @@ clock-names = "clkin0"; }; +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + /* Wireless SDIO Module */ &sd_emmc_a { status = "okay"; @@ -160,11 +172,6 @@ vmmc-supply = <&vddao_3v3>; vqmmc-supply = <&vddio_boot>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; }; /* SD card */ diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 7d5709c37e95..cbe99bd4e06d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -106,6 +106,42 @@ compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; + + /* CVBS is available on CON1 pin 36, disabled by default */ + cvbs-connector { + compatible = "composite-video-connector"; + status = "disabled"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; }; ðmac { @@ -137,6 +173,18 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts new file mode 100644 index 000000000000..70433e023fda --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts @@ -0,0 +1,218 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 BayLibre, SAS. + * Author: Neil Armstrong + * Author: Jerome Brunet + */ + +/dts-v1/; + +#include + +#include "meson-gxl-s905x.dtsi" + +/ { + compatible = "amlogic,p241", "amlogic,s805x", "amlogic,meson-gxl"; + model = "Amlogic Meson GXL (S805X) P241 Development Board"; + + aliases { + serial0 = &uart_AO; + serial1 = &uart_A; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x20000000>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +ðmac { + status = "okay"; +}; + +&internal_phy { + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index a9f9bb90a877..15014faa2ab2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -41,13 +41,6 @@ }; }; - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - hdmi-connector { compatible = "hdmi-connector"; type = "a"; @@ -108,7 +101,9 @@ }; }; -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts index 80a231476b80..92c425d0259c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts @@ -19,3 +19,10 @@ phy-mode = "rmii"; phy-handle = <&internal_phy>; }; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 0868da476e41..313f88f8759e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -209,10 +209,34 @@ #cooling-cells = <2>; }; +&cpu1 { + #cooling-cells = <2>; +}; + +&cpu2 { + #cooling-cells = <2>; +}; + +&cpu3 { + #cooling-cells = <2>; +}; + &cpu4 { #cooling-cells = <2>; }; +&cpu5 { + #cooling-cells = <2>; +}; + +&cpu6 { + #cooling-cells = <2>; +}; + +&cpu7 { + #cooling-cells = <2>; +}; + ðmac { pinctrl-0 = <ð_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts index 101417298a1d..73d656e4aade 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts @@ -40,13 +40,6 @@ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; }; }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; }; /* Q200 has exclusive choice between internal or external PHY */ @@ -79,7 +72,9 @@ }; }; -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts index 8d132b17514a..d02b80d77378 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts @@ -19,3 +19,10 @@ phy-mode = "rmii"; phy-handle = <&internal_phy>; }; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +};