ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late

The change moves some of peripheral registrations and initializations
(all peripherals dependent on GPIOs) from .init_machine to .init_late
level, this allows to safely shift the shared GPIO controller driver
initialization level after init level of i.MX IOMUXC driver.

Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -485,17 +485,32 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = {
 
 static void __init mx27pdk_init(void)
 {
-	int ret;
 	imx27_soc_init();
 
 	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
 		"mx27pdk");
-	mx27_3ds_sdhc1_enable_level_translator();
 	imx27_add_imx_uart0(&uart_pdata);
 	imx27_add_fec(NULL);
 	imx27_add_imx_keypad(&mx27_3ds_keymap_data);
-	imx27_add_mxc_mmc(0, &sdhc1_pdata);
 	imx27_add_imx2_wdt();
+
+	imx27_add_spi_imx1(&spi2_pdata);
+	imx27_add_spi_imx0(&spi1_pdata);
+
+	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx27_add_imx_fb(&mx27_3ds_fb_data);
+
+	imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
+}
+
+static void __init mx27pdk_late_init(void)
+{
+	int ret;
+
+	mx27_3ds_sdhc1_enable_level_translator();
+	imx27_add_mxc_mmc(0, &sdhc1_pdata);
+
 	otg_phy_init();
 
 	if (otg_mode_host) {
@@ -509,17 +524,12 @@ static void __init mx27pdk_init(void)
 	if (!otg_mode_host)
 		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 
-	imx27_add_spi_imx1(&spi2_pdata);
-	imx27_add_spi_imx0(&spi1_pdata);
 	mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT);
 	spi_register_board_info(mx27_3ds_spi_devs,
-						ARRAY_SIZE(mx27_3ds_spi_devs));
+				ARRAY_SIZE(mx27_3ds_spi_devs));
 
 	if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28)))
 		pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n");
-	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-	imx27_add_imx_fb(&mx27_3ds_fb_data);
 
 	ret = gpio_request_array(mx27_3ds_camera_gpios,
 				 ARRAY_SIZE(mx27_3ds_camera_gpios));
@@ -529,7 +539,6 @@ static void __init mx27pdk_init(void)
 	}
 
 	imx27_add_mx2_camera(&mx27_3ds_cam_pdata);
-	imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata);
 
 	imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0);
 }
@@ -547,5 +556,6 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	.init_irq = mx27_init_irq,
 	.init_time	= mx27pdk_timer_init,
 	.init_machine = mx27pdk_init,
+	.init_late	= mx27pdk_late_init,
 	.restart	= mxc_restart,
 MACHINE_END