ARM: dts: imx: update #interrupt-cells for gpio nodes

Change the value of #interrupt-cells of gpio nodes from 1 to 2, so that
the gpio irq type can be specified in device tree.  Also update binding
document to make it clear.

Reported-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This commit is contained in:
Shawn Guo 2012-07-06 20:03:37 +08:00
Родитель c1cb438522
Коммит 88cde8b78f
5 изменённых файлов: 33 добавлений и 24 удалений

Просмотреть файл

@ -11,6 +11,13 @@ Required properties:
the second cell is used to specify the gpio polarity:
0 = active high
1 = active low
- interrupt-controller: Marks the device node as an interrupt controller.
- #interrupt-cells : Should be 2. The first cell is the GPIO number.
The second cell bits[3:0] is used to specify trigger type and level flags:
1 = low-to-high edge triggered.
2 = high-to-low edge triggered.
4 = active high level-sensitive.
8 = active low level-sensitive.
Example:
@ -20,4 +27,6 @@ gpio0: gpio@73f84000 {
interrupts = <50 51>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};

Просмотреть файл

@ -121,7 +121,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio2: gpio@10015100 {
@ -131,7 +131,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio3: gpio@10015200 {
@ -141,7 +141,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio4: gpio@10015300 {
@ -151,7 +151,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio5: gpio@10015400 {
@ -161,7 +161,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio6: gpio@10015500 {
@ -171,7 +171,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
cspi3: cspi@10017000 {

Просмотреть файл

@ -133,7 +133,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio2: gpio@73f88000 {
@ -143,7 +143,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio3: gpio@73f8c000 {
@ -153,7 +153,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio4: gpio@73f90000 {
@ -163,7 +163,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
wdog@73f98000 { /* WDOG1 */

Просмотреть файл

@ -135,7 +135,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio2: gpio@53f88000 {
@ -145,7 +145,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio3: gpio@53f8c000 {
@ -155,7 +155,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio4: gpio@53f90000 {
@ -165,7 +165,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
wdog@53f98000 { /* WDOG1 */
@ -203,7 +203,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio6: gpio@53fe0000 {
@ -213,7 +213,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio7: gpio@53fe4000 {
@ -223,7 +223,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
i2c@53fec000 { /* I2C3 */

Просмотреть файл

@ -283,7 +283,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio2: gpio@020a0000 {
@ -293,7 +293,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio3: gpio@020a4000 {
@ -303,7 +303,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio4: gpio@020a8000 {
@ -313,7 +313,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio5: gpio@020ac000 {
@ -323,7 +323,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio6: gpio@020b0000 {
@ -333,7 +333,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
gpio7: gpio@020b4000 {
@ -343,7 +343,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
#interrupt-cells = <2>;
};
kpp@020b8000 {