clk: meson: aoclk: refactor common code into dedicated file

We try to refactor the common code into one dedicated file,
while preparing to add new Meson-AXG aoclk driver, this would
help us to better share the code by all aoclk drivers.

Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>

drivers/clk/meson/Kconfig

@@ -3,6 +3,12 @@ config COMMON_CLK_AMLOGIC
 	depends on OF
 	depends on ARCH_MESON || COMPILE_TEST
 
+config COMMON_CLK_MESON_AO
+	bool
+	depends on OF
+	depends on ARCH_MESON || COMPILE_TEST
+	select COMMON_CLK_REGMAP_MESON
+
 config COMMON_CLK_REGMAP_MESON
 	bool
 	select REGMAP
@@ -21,6 +27,7 @@ config COMMON_CLK_GXBB
 	bool
 	depends on COMMON_CLK_AMLOGIC
 	select RESET_CONTROLLER
+	select COMMON_CLK_MESON_AO
 	select COMMON_CLK_REGMAP_MESON
 	select MFD_SYSCON
 	help

drivers/clk/meson/Makefile

@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o
+obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
 obj-$(CONFIG_COMMON_CLK_GXBB)	 += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o
 obj-$(CONFIG_COMMON_CLK_AXG)	 += axg.o

drivers/clk/meson/gxbb-aoclk.c

@@ -52,39 +52,12 @@
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
-#include <linux/clk-provider.h>
-#include <linux/of_address.h>
 #include <linux/platform_device.h>
-#include <linux/reset-controller.h>
 #include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <dt-bindings/clock/gxbb-aoclkc.h>
-#include <dt-bindings/reset/gxbb-aoclkc.h>
 #include "clk-regmap.h"
+#include "meson-aoclk.h"
 #include "gxbb-aoclk.h"
 
-struct gxbb_aoclk_reset_controller {
-	struct reset_controller_dev reset;
-	unsigned int *data;
-	struct regmap *regmap;
-};
-
-static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
-			       unsigned long id)
-{
-	struct gxbb_aoclk_reset_controller *reset =
-		container_of(rcdev, struct gxbb_aoclk_reset_controller, reset);
-
-	return regmap_write(reset->regmap, AO_RTI_GEN_CNTL_REG0,
-			    BIT(reset->data[id]));
-}
-
-static const struct reset_control_ops gxbb_aoclk_reset_ops = {
-	.reset = gxbb_aoclk_do_reset,
-};
-
 #define GXBB_AO_GATE(_name, _bit)					\
 static struct clk_regmap _name##_ao = {					\
 	.data = &(struct clk_regmap_gate_data) {			\
@@ -117,7 +90,7 @@ static struct aoclk_cec_32k cec_32k_ao = {
 	},
 };
 
-static unsigned int gxbb_aoclk_reset[] = {
+static const unsigned int gxbb_aoclk_reset[] = {
 	[RESET_AO_REMOTE] = 16,
 	[RESET_AO_I2C_MASTER] = 18,
 	[RESET_AO_I2C_SLAVE] = 19,
@@ -135,7 +108,7 @@ static struct clk_regmap *gxbb_aoclk_gate[] = {
 	[CLKID_AO_IR_BLASTER] = &ir_blaster_ao,
 };
 
-static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
+static const struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
 	.hws = {
 		[CLKID_AO_REMOTE] = &remote_ao.hw,
 		[CLKID_AO_I2C_MASTER] = &i2c_master_ao.hw,
@@ -145,58 +118,55 @@ static struct clk_hw_onecell_data gxbb_aoclk_onecell_data = {
 		[CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw,
 		[CLKID_AO_CEC_32K] = &cec_32k_ao.hw,
 	},
-	.num = 7,
+	.num = NR_CLKS,
 };
 
-static int gxbb_aoclkc_probe(struct platform_device *pdev)
+static int gxbb_register_cec_ao_32k(struct platform_device *pdev)
 {
-	struct gxbb_aoclk_reset_controller *rstc;
 	struct device *dev = &pdev->dev;
 	struct regmap *regmap;
-	int ret, clkid;
-
-	rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
-	if (!rstc)
-		return -ENOMEM;
+	int ret;
 
 	regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
 	if (IS_ERR(regmap)) {
 		dev_err(dev, "failed to get regmap\n");
-		return -ENODEV;
-	}
-
-	/* Reset Controller */
-	rstc->regmap = regmap;
-	rstc->data = gxbb_aoclk_reset;
-	rstc->reset.ops = &gxbb_aoclk_reset_ops;
-	rstc->reset.nr_resets = ARRAY_SIZE(gxbb_aoclk_reset);
-	rstc->reset.of_node = dev->of_node;
-	ret = devm_reset_controller_register(dev, &rstc->reset);
-
-	/*
-	 * Populate regmap and register all clks
-	 */
-	for (clkid = 0; clkid < ARRAY_SIZE(gxbb_aoclk_gate); clkid++) {
-		gxbb_aoclk_gate[clkid]->map = regmap;
-
-		ret = devm_clk_hw_register(dev,
-					   gxbb_aoclk_onecell_data.hws[clkid]);
-		if (ret)
-			return ret;
+		return PTR_ERR(regmap);
 	}
 
 	/* Specific clocks */
 	cec_32k_ao.regmap = regmap;
 	ret = devm_clk_hw_register(dev, &cec_32k_ao.hw);
+	if (ret) {
+		dev_err(&pdev->dev, "clk cec_32k_ao register failed.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct meson_aoclk_data gxbb_aoclkc_data = {
+	.reset_reg	= AO_RTI_GEN_CNTL_REG0,
+	.num_reset	= ARRAY_SIZE(gxbb_aoclk_reset),
+	.reset		= gxbb_aoclk_reset,
+	.num_clks	= ARRAY_SIZE(gxbb_aoclk_gate),
+	.clks		= gxbb_aoclk_gate,
+	.hw_data	= &gxbb_aoclk_onecell_data,
+};
+
+static int gxbb_aoclkc_probe(struct platform_device *pdev)
+{
+	int ret = gxbb_register_cec_ao_32k(pdev);
 	if (ret)
 		return ret;
 
-	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
-			&gxbb_aoclk_onecell_data);
+	return meson_aoclkc_probe(pdev);
 }
 
 static const struct of_device_id gxbb_aoclkc_match_table[] = {
-	{ .compatible = "amlogic,meson-gx-aoclkc" },
+	{
+		.compatible	= "amlogic,meson-gx-aoclkc",
+		.data		= &gxbb_aoclkc_data,
+	},
 	{ }
 };
 

drivers/clk/meson/gxbb-aoclk.h

@@ -8,6 +8,8 @@
 #ifndef __GXBB_AOCLKC_H
 #define __GXBB_AOCLKC_H
 
+#define NR_CLKS	7
+
 /* AO Configuration Clock registers offsets */
 #define AO_RTI_PWR_CNTL_REG1	0x0c
 #define AO_RTI_PWR_CNTL_REG0	0x10
@@ -28,4 +30,7 @@ struct aoclk_cec_32k {
 
 extern const struct clk_ops meson_aoclk_cec_32k_ops;
 
+#include <dt-bindings/clock/gxbb-aoclkc.h>
+#include <dt-bindings/reset/gxbb-aoclkc.h>
+
 #endif /* __GXBB_AOCLKC_H */

drivers/clk/meson/meson-aoclk.c

@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Amlogic Meson-AXG Clock Controller Driver
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Yixun Lan <yixun.lan@amlogic.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include "clk-regmap.h"
+#include "meson-aoclk.h"
+
+static int meson_aoclk_do_reset(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	struct meson_aoclk_reset_controller *rstc =
+		container_of(rcdev, struct meson_aoclk_reset_controller, reset);
+
+	return regmap_write(rstc->regmap, rstc->data->reset_reg,
+			    BIT(rstc->data->reset[id]));
+}
+
+static const struct reset_control_ops meson_aoclk_reset_ops = {
+	.reset = meson_aoclk_do_reset,
+};
+
+int meson_aoclkc_probe(struct platform_device *pdev)
+{
+	struct meson_aoclk_reset_controller *rstc;
+	struct meson_aoclk_data *data;
+	struct device *dev = &pdev->dev;
+	struct regmap *regmap;
+	int ret, clkid;
+
+	data = (struct meson_aoclk_data *) of_device_get_match_data(dev);
+	if (!data)
+		return -ENODEV;
+
+	rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
+	if (!rstc)
+		return -ENOMEM;
+
+	regmap = syscon_node_to_regmap(of_get_parent(dev->of_node));
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "failed to get regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	/* Reset Controller */
+	rstc->data = data;
+	rstc->regmap = regmap;
+	rstc->reset.ops = &meson_aoclk_reset_ops;
+	rstc->reset.nr_resets = data->num_reset,
+	rstc->reset.of_node = dev->of_node;
+	ret = devm_reset_controller_register(dev, &rstc->reset);
+	if (ret) {
+		dev_err(dev, "failed to register reset controller\n");
+		return ret;
+	}
+
+	/*
+	 * Populate regmap and register all clks
+	 */
+	for (clkid = 0; clkid < data->num_clks; clkid++) {
+		data->clks[clkid]->map = regmap;
+
+		ret = devm_clk_hw_register(dev, data->hw_data->hws[clkid]);
+		if (ret)
+			return ret;
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+		(void *) data->hw_data);
+}

drivers/clk/meson/meson-aoclk.h

@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai@amlogic.com>
+ * Author: Yixun Lan <yixun.lan@amlogic.com>
+ */
+
+#ifndef __MESON_AOCLK_H__
+#define __MESON_AOCLK_H__
+
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include "clk-regmap.h"
+
+struct meson_aoclk_data {
+	const unsigned int			reset_reg;
+	const int				num_reset;
+	const unsigned int			*reset;
+	int					num_clks;
+	struct clk_regmap			**clks;
+	const struct clk_hw_onecell_data	*hw_data;
+};
+
+struct meson_aoclk_reset_controller {
+	struct reset_controller_dev		reset;
+	const struct meson_aoclk_data		*data;
+	struct regmap				*regmap;
+};
+
+int meson_aoclkc_probe(struct platform_device *pdev);
+#endif