ARM: dts: Add support for dra76-evm
dra76-evm is a board based on TI's dra76 processor targeting for infotainment systems. Adding support for this platform. dra76-evm and dra7-evm has a similar layout except with few differences. So create a dra7-evm-common.dtsi with similarities on dra76-evm and dra7-evm. Include this common dtsi in both dra7-evm.dts and dra76-evm.dts Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Lokesh Vutla
Tony Lindgren
Родитель
148127d35a
Коммит
895bd4b3e5
|
|
@ -187,6 +187,9 @@ Boards:
|
|||
- AM5718 IDK
|
||||
compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7"
|
||||
|
||||
- DRA762 EVM: Software Development Board for DRA762
|
||||
compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7"
|
||||
|
||||
- DRA742 EVM: Software Development Board for DRA742
|
||||
compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
|
||||
|
||||
|
|
|
|||
|
|
@ -658,7 +658,8 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
|
|||
dra7-evm.dtb \
|
||||
dra72-evm.dtb \
|
||||
dra72-evm-revc.dtb \
|
||||
dra71-evm.dtb
|
||||
dra71-evm.dtb \
|
||||
dra76-evm.dtb
|
||||
dtb-$(CONFIG_ARCH_ORION5X) += \
|
||||
orion5x-kuroboxpro.dtb \
|
||||
orion5x-lacie-d2-network.dtb \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,258 @@
|
|||
/*
|
||||
* Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/clk/ti-dra7-atl.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
stdout-path = &uart1;
|
||||
};
|
||||
|
||||
extcon_usb1: extcon_usb1 {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
sound0: sound0 {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "DRA7xx-EVM";
|
||||
simple-audio-card,widgets =
|
||||
"Headphone", "Headphone Jack",
|
||||
"Line", "Line Out",
|
||||
"Microphone", "Mic Jack",
|
||||
"Line", "Line In";
|
||||
simple-audio-card,routing =
|
||||
"Headphone Jack", "HPLOUT",
|
||||
"Headphone Jack", "HPROUT",
|
||||
"Line Out", "LLOUT",
|
||||
"Line Out", "RLOUT",
|
||||
"MIC3L", "Mic Jack",
|
||||
"MIC3R", "Mic Jack",
|
||||
"Mic Jack", "Mic Bias",
|
||||
"LINE1L", "Line In",
|
||||
"LINE1R", "Line In";
|
||||
simple-audio-card,format = "dsp_b";
|
||||
simple-audio-card,bitclock-master = <&sound0_master>;
|
||||
simple-audio-card,frame-master = <&sound0_master>;
|
||||
simple-audio-card,bitclock-inversion;
|
||||
|
||||
sound0_master: simple-audio-card,cpu {
|
||||
sound-dai = <&mcasp3>;
|
||||
system-clock-frequency = <5644800>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&tlv320aic3106>;
|
||||
clocks = <&atl_clkin2_ck>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
led0 {
|
||||
label = "dra7:usr1";
|
||||
gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led1 {
|
||||
label = "dra7:usr2";
|
||||
gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led2 {
|
||||
label = "dra7:usr3";
|
||||
gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led3 {
|
||||
label = "dra7:usr4";
|
||||
gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
autorepeat;
|
||||
|
||||
USER1 {
|
||||
label = "btnUser1";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
USER2 {
|
||||
label = "btnUser2";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&mcspi1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mcspi2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<&dra7_pmx_core 0x3e0>;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qspi {
|
||||
status = "okay";
|
||||
|
||||
spi-max-frequency = <76800000>;
|
||||
m25p80@0 {
|
||||
compatible = "s25fl256s1";
|
||||
spi-max-frequency = <76800000>;
|
||||
reg = <0>;
|
||||
spi-tx-bus-width = <1>;
|
||||
spi-rx-bus-width = <4>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
/* MTD partition table.
|
||||
* The ROM checks the first four physical blocks
|
||||
* for a valid file to boot and the flash here is
|
||||
* 64KiB block size.
|
||||
*/
|
||||
partition@0 {
|
||||
label = "QSPI.SPL";
|
||||
reg = <0x00000000 0x000010000>;
|
||||
};
|
||||
partition@1 {
|
||||
label = "QSPI.SPL.backup1";
|
||||
reg = <0x00010000 0x00010000>;
|
||||
};
|
||||
partition@2 {
|
||||
label = "QSPI.SPL.backup2";
|
||||
reg = <0x00020000 0x00010000>;
|
||||
};
|
||||
partition@3 {
|
||||
label = "QSPI.SPL.backup3";
|
||||
reg = <0x00030000 0x00010000>;
|
||||
};
|
||||
partition@4 {
|
||||
label = "QSPI.u-boot";
|
||||
reg = <0x00040000 0x00100000>;
|
||||
};
|
||||
partition@5 {
|
||||
label = "QSPI.u-boot-spl-os";
|
||||
reg = <0x00140000 0x00080000>;
|
||||
};
|
||||
partition@6 {
|
||||
label = "QSPI.u-boot-env";
|
||||
reg = <0x001c0000 0x00010000>;
|
||||
};
|
||||
partition@7 {
|
||||
label = "QSPI.u-boot-env.backup1";
|
||||
reg = <0x001d0000 0x0010000>;
|
||||
};
|
||||
partition@8 {
|
||||
label = "QSPI.kernel";
|
||||
reg = <0x001e0000 0x0800000>;
|
||||
};
|
||||
partition@9 {
|
||||
label = "QSPI.file-system";
|
||||
reg = <0x009e0000 0x01620000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&omap_dwc3_1 {
|
||||
extcon = <&extcon_usb1>;
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
dr_mode = "otg";
|
||||
extcon = <&extcon_usb1>;
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&atl {
|
||||
assigned-clocks = <&abe_dpll_sys_clk_mux>,
|
||||
<&atl_gfclk_mux>,
|
||||
<&dpll_abe_ck>,
|
||||
<&dpll_abe_m2x2_ck>,
|
||||
<&atl_clkin2_ck>;
|
||||
assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
|
||||
assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
atl2 {
|
||||
bws = <DRA7_ATL_WS_MCASP2_FSX>;
|
||||
aws = <DRA7_ATL_WS_MCASP3_FSX>;
|
||||
};
|
||||
};
|
||||
|
||||
&mcasp3 {
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
assigned-clocks = <&mcasp3_ahclkx_mux>;
|
||||
assigned-clock-parents = <&atl_clkin2_ck>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
op-mode = <0>; /* MCASP_IIS_MODE */
|
||||
tdm-slots = <2>;
|
||||
/* 4 serializer */
|
||||
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
|
||||
1 2 0 0
|
||||
>;
|
||||
tx-num-evt = <32>;
|
||||
rx-num-evt = <32>;
|
||||
};
|
||||
|
||||
&mailbox5 {
|
||||
status = "okay";
|
||||
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
|
||||
status = "okay";
|
||||
};
|
||||
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&mailbox6 {
|
||||
status = "okay";
|
||||
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
|
||||
status = "okay";
|
||||
};
|
||||
mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
|
@ -8,9 +8,7 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include "dra74x.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/clk/ti-dra7-atl.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include "dra7-evm-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TI DRA742";
|
||||
|
|
@ -21,10 +19,6 @@
|
|||
reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart1;
|
||||
};
|
||||
|
||||
evm_1v8_sw: fixedregulator-evm_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "evm_1v8";
|
||||
|
|
@ -59,11 +53,6 @@
|
|||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
extcon_usb1: extcon_usb1 {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
extcon_usb2: extcon_usb2 {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
|
||||
|
|
@ -81,85 +70,6 @@
|
|||
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
sound0: sound0 {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "DRA7xx-EVM";
|
||||
simple-audio-card,widgets =
|
||||
"Headphone", "Headphone Jack",
|
||||
"Line", "Line Out",
|
||||
"Microphone", "Mic Jack",
|
||||
"Line", "Line In";
|
||||
simple-audio-card,routing =
|
||||
"Headphone Jack", "HPLOUT",
|
||||
"Headphone Jack", "HPROUT",
|
||||
"Line Out", "LLOUT",
|
||||
"Line Out", "RLOUT",
|
||||
"MIC3L", "Mic Jack",
|
||||
"MIC3R", "Mic Jack",
|
||||
"Mic Jack", "Mic Bias",
|
||||
"LINE1L", "Line In",
|
||||
"LINE1R", "Line In";
|
||||
simple-audio-card,format = "dsp_b";
|
||||
simple-audio-card,bitclock-master = <&sound0_master>;
|
||||
simple-audio-card,frame-master = <&sound0_master>;
|
||||
simple-audio-card,bitclock-inversion;
|
||||
|
||||
sound0_master: simple-audio-card,cpu {
|
||||
sound-dai = <&mcasp3>;
|
||||
system-clock-frequency = <5644800>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&tlv320aic3106>;
|
||||
clocks = <&atl_clkin2_ck>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
led0 {
|
||||
label = "dra7:usr1";
|
||||
gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led1 {
|
||||
label = "dra7:usr2";
|
||||
gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led2 {
|
||||
label = "dra7:usr3";
|
||||
gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led3 {
|
||||
label = "dra7:usr4";
|
||||
gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
autorepeat;
|
||||
|
||||
USER1 {
|
||||
label = "btnUser1";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
USER2 {
|
||||
label = "btnUser2";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dra7_pmx_core {
|
||||
|
|
@ -414,33 +324,6 @@
|
|||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&mcspi1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mcspi2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<&dra7_pmx_core 0x3e0>;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
|
|
@ -467,84 +350,10 @@
|
|||
cpu0-supply = <&smps123_reg>;
|
||||
};
|
||||
|
||||
&qspi {
|
||||
status = "okay";
|
||||
|
||||
spi-max-frequency = <76800000>;
|
||||
m25p80@0 {
|
||||
compatible = "s25fl256s1";
|
||||
spi-max-frequency = <76800000>;
|
||||
reg = <0>;
|
||||
spi-tx-bus-width = <1>;
|
||||
spi-rx-bus-width = <4>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
/* MTD partition table.
|
||||
* The ROM checks the first four physical blocks
|
||||
* for a valid file to boot and the flash here is
|
||||
* 64KiB block size.
|
||||
*/
|
||||
partition@0 {
|
||||
label = "QSPI.SPL";
|
||||
reg = <0x00000000 0x000010000>;
|
||||
};
|
||||
partition@1 {
|
||||
label = "QSPI.SPL.backup1";
|
||||
reg = <0x00010000 0x00010000>;
|
||||
};
|
||||
partition@2 {
|
||||
label = "QSPI.SPL.backup2";
|
||||
reg = <0x00020000 0x00010000>;
|
||||
};
|
||||
partition@3 {
|
||||
label = "QSPI.SPL.backup3";
|
||||
reg = <0x00030000 0x00010000>;
|
||||
};
|
||||
partition@4 {
|
||||
label = "QSPI.u-boot";
|
||||
reg = <0x00040000 0x00100000>;
|
||||
};
|
||||
partition@5 {
|
||||
label = "QSPI.u-boot-spl-os";
|
||||
reg = <0x00140000 0x00080000>;
|
||||
};
|
||||
partition@6 {
|
||||
label = "QSPI.u-boot-env";
|
||||
reg = <0x001c0000 0x00010000>;
|
||||
};
|
||||
partition@7 {
|
||||
label = "QSPI.u-boot-env.backup1";
|
||||
reg = <0x001d0000 0x0010000>;
|
||||
};
|
||||
partition@8 {
|
||||
label = "QSPI.kernel";
|
||||
reg = <0x001e0000 0x0800000>;
|
||||
};
|
||||
partition@9 {
|
||||
label = "QSPI.file-system";
|
||||
reg = <0x009e0000 0x01620000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&omap_dwc3_1 {
|
||||
extcon = <&extcon_usb1>;
|
||||
};
|
||||
|
||||
&omap_dwc3_2 {
|
||||
extcon = <&extcon_usb2>;
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
dr_mode = "otg";
|
||||
extcon = <&extcon_usb1>;
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&elm {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -675,61 +484,6 @@
|
|||
pinctrl-2 = <&dcan1_pins_default>;
|
||||
};
|
||||
|
||||
&atl {
|
||||
assigned-clocks = <&abe_dpll_sys_clk_mux>,
|
||||
<&atl_gfclk_mux>,
|
||||
<&dpll_abe_ck>,
|
||||
<&dpll_abe_m2x2_ck>,
|
||||
<&atl_clkin2_ck>;
|
||||
assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
|
||||
assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
atl2 {
|
||||
bws = <DRA7_ATL_WS_MCASP2_FSX>;
|
||||
aws = <DRA7_ATL_WS_MCASP3_FSX>;
|
||||
};
|
||||
};
|
||||
|
||||
&mcasp3 {
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
assigned-clocks = <&mcasp3_ahclkx_mux>;
|
||||
assigned-clock-parents = <&atl_clkin2_ck>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
op-mode = <0>; /* MCASP_IIS_MODE */
|
||||
tdm-slots = <2>;
|
||||
/* 4 serializer */
|
||||
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
|
||||
1 2 0 0
|
||||
>;
|
||||
tx-num-evt = <32>;
|
||||
rx-num-evt = <32>;
|
||||
};
|
||||
|
||||
&mailbox5 {
|
||||
status = "okay";
|
||||
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
|
||||
status = "okay";
|
||||
};
|
||||
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&mailbox6 {
|
||||
status = "okay";
|
||||
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
|
||||
status = "okay";
|
||||
};
|
||||
mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1_rc {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,423 @@
|
|||
/*
|
||||
* Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "dra76x.dtsi"
|
||||
#include "dra7-evm-common.dtsi"
|
||||
#include <dt-bindings/net/ti-dp83867.h>
|
||||
|
||||
/ {
|
||||
model = "TI DRA762 EVM";
|
||||
compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7";
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x80000000 0x0 0x80000000>;
|
||||
};
|
||||
|
||||
vsys_12v0: fixedregulator-vsys12v0 {
|
||||
/* main supply */
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vsys_12v0";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vsys_5v0: fixedregulator-vsys5v0 {
|
||||
/* Output of Cntlr B of TPS43351-Q1 on dra76-evm */
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vsys_5v0";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vsys_12v0>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vsys_3v3: fixedregulator-vsys3v3 {
|
||||
/* Output of Cntlr A of TPS43351-Q1 on dra76-evm */
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vsys_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vsys_12v0>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vio_3v3: fixedregulator-vio_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vio_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vsys_3v3>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vio_3v3_sd: fixedregulator-sd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vio_3v3_sd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vio_3v3>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
vio_1v8: fixedregulator-vio_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vio_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&smps5_reg>;
|
||||
};
|
||||
|
||||
vtt_fixed: fixedregulator-vtt {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vtt_fixed";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
vin-supply = <&vsys_3v3>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
aic_dvdd: fixedregulator-aic_dvdd {
|
||||
/* TPS77018DBVT */
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "aic_dvdd";
|
||||
vin-supply = <&vio_3v3>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
&dra7_pmx_core {
|
||||
mmc1_pins_default: mmc1_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
|
||||
DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
|
||||
DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
|
||||
DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
|
||||
DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
|
||||
DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
|
||||
DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc1_pins_sdr12: pinmux_mmc1_sdr12_pins {
|
||||
pinctrl-single,pins = <
|
||||
DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
|
||||
DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
|
||||
DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
|
||||
DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
|
||||
DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
|
||||
DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc2_pins_default: mmc2_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
|
||||
DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
|
||||
DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
|
||||
DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
|
||||
DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
|
||||
DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
|
||||
DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
|
||||
DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
|
||||
DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
|
||||
DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
tps65917: tps65917@58 {
|
||||
compatible = "ti,tps65917";
|
||||
reg = <0x58>;
|
||||
ti,system-power-controller;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
tps65917_pmic {
|
||||
compatible = "ti,tps65917-pmic";
|
||||
|
||||
smps12-in-supply = <&vsys_3v3>;
|
||||
smps3-in-supply = <&vsys_3v3>;
|
||||
smps4-in-supply = <&vsys_3v3>;
|
||||
smps5-in-supply = <&vsys_3v3>;
|
||||
ldo1-in-supply = <&vsys_3v3>;
|
||||
ldo2-in-supply = <&vsys_3v3>;
|
||||
ldo3-in-supply = <&vsys_5v0>;
|
||||
ldo4-in-supply = <&vsys_5v0>;
|
||||
ldo5-in-supply = <&vsys_3v3>;
|
||||
|
||||
tps65917_regulators: regulators {
|
||||
smps12_reg: smps12 {
|
||||
/* VDD_DSPEVE */
|
||||
regulator-name = "smps12";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps3_reg: smps3 {
|
||||
/* VDD_CORE */
|
||||
regulator-name = "smps3";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
smps4_reg: smps4 {
|
||||
/* VDD_IVA */
|
||||
regulator-name = "smps4";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps5_reg: smps5 {
|
||||
/* VDDS1V8 */
|
||||
regulator-name = "smps5";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo1_reg: ldo1 {
|
||||
/* LDO1_OUT --> VDA_PHY1_1V8 */
|
||||
regulator-name = "ldo1";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-allow-bypass;
|
||||
};
|
||||
|
||||
ldo2_reg: ldo2 {
|
||||
/* LDO2_OUT --> VDA_PHY2_1V8 */
|
||||
regulator-name = "ldo2";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-allow-bypass;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo3_reg: ldo3 {
|
||||
/* VDA_USB_3V3 */
|
||||
regulator-name = "ldo3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo5_reg: ldo5 {
|
||||
/* VDDA_1V8_PLL */
|
||||
regulator-name = "ldo5";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo4_reg: ldo4 {
|
||||
/* VDD_SDIO_DV */
|
||||
regulator-name = "ldo4";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
tps65917_power_button {
|
||||
compatible = "ti,palmas-pwrbutton";
|
||||
interrupt-parent = <&tps65917>;
|
||||
interrupts = <1 IRQ_TYPE_NONE>;
|
||||
wakeup-source;
|
||||
ti,palmas-long-press-seconds = <6>;
|
||||
};
|
||||
};
|
||||
|
||||
lp87565: lp87565@60 {
|
||||
compatible = "ti,lp87565-q1";
|
||||
reg = <0x60>;
|
||||
|
||||
buck10-in-supply =<&vsys_3v3>;
|
||||
buck23-in-supply =<&vsys_3v3>;
|
||||
|
||||
regulators: regulators {
|
||||
buck10_reg: buck10 {
|
||||
/*VDD_MPU*/
|
||||
regulator-name = "buck10";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck23_reg: buck23 {
|
||||
/* VDD_GPU*/
|
||||
regulator-name = "buck23";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pcf_lcd: pcf8757@20 {
|
||||
compatible = "ti,pcf8575", "nxp,pcf8575";
|
||||
reg = <0x20>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
|
||||
pcf_gpio_21: pcf8757@21 {
|
||||
compatible = "ti,pcf8575", "nxp,pcf8575";
|
||||
reg = <0x21>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
pcf_hdmi: pcf8575@26 {
|
||||
compatible = "ti,pcf8575", "nxp,pcf8575";
|
||||
reg = <0x26>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
p1 {
|
||||
/* vin6_sel_s0: high: VIN6, low: audio */
|
||||
gpio-hog;
|
||||
gpios = <1 GPIO_ACTIVE_HIGH>;
|
||||
output-low;
|
||||
line-name = "vin6_sel_s0";
|
||||
};
|
||||
};
|
||||
|
||||
tlv320aic3106: tlv320aic3106@19 {
|
||||
#sound-dai-cells = <0>;
|
||||
compatible = "ti,tlv320aic3106";
|
||||
reg = <0x19>;
|
||||
adc-settle-ms = <40>;
|
||||
ai3x-micbias-vg = <1>; /* 2.0V */
|
||||
status = "okay";
|
||||
|
||||
/* Regulators */
|
||||
AVDD-supply = <&vio_3v3>;
|
||||
IOVDD-supply = <&vio_3v3>;
|
||||
DRVDD-supply = <&vio_3v3>;
|
||||
DVDD-supply = <&aic_dvdd>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
vdd-supply = <&buck10_reg>;
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&vio_3v3_sd>;
|
||||
vmmc_aux-supply = <&ldo4_reg>;
|
||||
bus-width = <4>;
|
||||
/*
|
||||
* SDCD signal is not being used here - using the fact that GPIO mode
|
||||
* is always hardwired.
|
||||
*/
|
||||
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins_default>;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&vio_1v8>;
|
||||
bus-width = <8>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc2_pins_default>;
|
||||
};
|
||||
|
||||
/* No RTC on this device */
|
||||
&rtc {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mac {
|
||||
status = "okay";
|
||||
|
||||
dual_emac;
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
phy_id = <&davinci_mdio>, <2>;
|
||||
phy-mode = "rgmii-id";
|
||||
dual_emac_res_vlan = <1>;
|
||||
};
|
||||
|
||||
&cpsw_emac1 {
|
||||
phy_id = <&davinci_mdio>, <3>;
|
||||
phy-mode = "rgmii-id";
|
||||
dual_emac_res_vlan = <2>;
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
dp83867_0: ethernet-phy@2 {
|
||||
reg = <2>;
|
||||
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
||||
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
|
||||
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
|
||||
ti,min-output-impedance;
|
||||
ti,dp83867-rxctrl-strap-quirk;
|
||||
};
|
||||
|
||||
dp83867_1: ethernet-phy@3 {
|
||||
reg = <3>;
|
||||
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
||||
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
|
||||
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
|
||||
ti,min-output-impedance;
|
||||
ti,dp83867-rxctrl-strap-quirk;
|
||||
};
|
||||
};
|
||||
|
||||
&usb2_phy1 {
|
||||
phy-supply = <&ldo3_reg>;
|
||||
};
|
||||
|
||||
&usb2_phy2 {
|
||||
phy-supply = <&ldo3_reg>;
|
||||
};
|
||||
|
||||
&qspi {
|
||||
spi-max-frequency = <96000000>;
|
||||
m25p80@0 {
|
||||
spi-max-frequency = <96000000>;
|
||||
};
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче