arm/mx2: define seperate gpio port descriptions for imx21 and imx27

As the gpio ports have different addresses on imx21 and imx27 there are
two different port descriptions needed if not relying on the overloaded
cpp macro IO_ADDRESS.  So some cpp magic is added to minimize code
duplication.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

arch/arm/mach-mx2/devices.c

@@ -432,36 +432,52 @@ DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
 DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
 
 /* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
-	{
-		.chip.label = "gpio-0",
-		.irq = MX2x_INT_GPIO,
-		.base = IO_ADDRESS(MX2x_GPIO_BASE_ADDR),
-		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	}, {
-		.chip.label = "gpio-1",
-		.base = IO_ADDRESS(MX2x_GPIO_BASE_ADDR + 0x100),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	}, {
-		.chip.label = "gpio-2",
-		.base = IO_ADDRESS(MX2x_GPIO_BASE_ADDR + 0x200),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	}, {
-		.chip.label = "gpio-3",
-		.base = IO_ADDRESS(MX2x_GPIO_BASE_ADDR + 0x300),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	}, {
-		.chip.label = "gpio-4",
-		.base = IO_ADDRESS(MX2x_GPIO_BASE_ADDR + 0x400),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
-	}, {
-		.chip.label = "gpio-5",
-		.base = IO_ADDRESS(MX2x_GPIO_BASE_ADDR + 0x500),
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
+#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq)				\
+	{								\
+		.chip.label = "gpio-" #n,				\
+		.irq = _irq,						\
+		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
+				n * 0x100),				\
+		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
 	}
-};
+
+#define DEFINE_MXC_GPIO_PORT(SOC, n)					\
+	{								\
+		.chip.label = "gpio-" #n,				\
+		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
+				n * 0x100),				\
+		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
+	}
+
+#define DEFINE_MXC_GPIO_PORTS(SOC, pfx)					\
+	static struct mxc_gpio_port pfx ## _gpio_ports[] = {		\
+		DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO),	\
+		DEFINE_MXC_GPIO_PORT(SOC, 1),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 2),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 3),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 4),				\
+		DEFINE_MXC_GPIO_PORT(SOC, 5),				\
+	}
+
+#ifdef CONFIG_MACH_MX21
+DEFINE_MXC_GPIO_PORTS(MX21, imx21);
+#endif
+
+#ifdef CONFIG_MACH_MX27
+DEFINE_MXC_GPIO_PORTS(MX27, imx27);
+#endif
 
 int __init mxc_register_gpios(void)
 {
-	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+#ifdef CONFIG_MACH_MX21
+	if (cpu_is_mx21())
+		return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
+	else
+#endif
+#ifdef CONFIG_MACH_MX27
+	if (cpu_is_mx27())
+		return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
+	else
+#endif
+		return 0;
 }