cxgb4vf: Add 40G support for cxgb4vf driver

Add 40G support for cxgb4vf driver. ethtool speed values are just numbers of
megabits and there is no SPEED_40000 in ethtool speed values. To be consistent,
use integer constants directly for all speeds.

Use is_x_10g_port()("is 10Gb/s or higher") in cfg_queues() instead of
is_10g_port() ("is exactly 10Gb/s"). Else we will end up using a single
"Queue Set" on 40Gb/s adapters.

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Hariprasad Shenai 2014-10-09 05:48:46 +05:30 коммит произвёл David S. Miller
Родитель 7207c0d154
Коммит 897d55df3c
3 изменённых файлов: 21 добавлений и 7 удалений

Просмотреть файл

@ -163,15 +163,19 @@ void t4vf_os_link_changed(struct adapter *adapter, int pidx, int link_ok)
netif_carrier_on(dev);
switch (pi->link_cfg.speed) {
case SPEED_10000:
case 40000:
s = "40Gbps";
break;
case 10000:
s = "10Gbps";
break;
case SPEED_1000:
case 1000:
s = "1000Mbps";
break;
case SPEED_100:
case 100:
s = "100Mbps";
break;
@ -2351,7 +2355,7 @@ static void cfg_queues(struct adapter *adapter)
struct port_info *pi = adap2pinfo(adapter, pidx);
pi->first_qset = qidx;
pi->nqsets = is_10g_port(&pi->link_cfg) ? q10g : 1;
pi->nqsets = is_x_10g_port(&pi->link_cfg) ? q10g : 1;
qidx += pi->nqsets;
}
s->ethqsets = qidx;

Просмотреть файл

@ -228,6 +228,12 @@ static inline bool is_10g_port(const struct link_config *lc)
return (lc->supported & SUPPORTED_10000baseT_Full) != 0;
}
static inline bool is_x_10g_port(const struct link_config *lc)
{
return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0 ||
(lc->supported & FW_PORT_CAP_SPEED_40G) != 0;
}
static inline unsigned int core_ticks_per_usec(const struct adapter *adapter)
{
return adapter->params.vpd.cclk / 1000;

Просмотреть файл

@ -327,6 +327,8 @@ int t4vf_port_init(struct adapter *adapter, int pidx)
v |= SUPPORTED_1000baseT_Full;
if (word & FW_PORT_CAP_SPEED_10G)
v |= SUPPORTED_10000baseT_Full;
if (word & FW_PORT_CAP_SPEED_40G)
v |= SUPPORTED_40000baseSR4_Full;
if (word & FW_PORT_CAP_ANEG)
v |= SUPPORTED_Autoneg;
init_link_config(&pi->link_cfg, v);
@ -1352,11 +1354,13 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl)
if (word & FW_PORT_CMD_TXPAUSE)
fc |= PAUSE_TX;
if (word & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M))
speed = SPEED_100;
speed = 100;
else if (word & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G))
speed = SPEED_1000;
speed = 1000;
else if (word & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G))
speed = SPEED_10000;
speed = 10000;
else if (word & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_40G))
speed = 40000;
/*
* Scan all of our "ports" (Virtual Interfaces) looking for