ARM: dts: sun7i: bananapi-m1-plus: Reindent whole file using tabs
The bananapi-m1-plus dts file was indented using 4 spaces, without tabs. This does not match the code style. Reindent the whole file before we do anything else. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This commit is contained in:
Chen-Yu Tsai
Maxime Ripard
Родитель
6be9aa1341
Коммит
8b0b593af7
|
|
@ -49,182 +49,182 @@
|
|||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
|
||||
/ {
|
||||
model = "Banana Pi BPI-M1-Plus";
|
||||
compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20";
|
||||
model = "Banana Pi BPI-M1-Plus";
|
||||
compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_pins_bananapi>;
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_pins_bananapi>;
|
||||
|
||||
green {
|
||||
label = "bananapi-m1-plus:green:usr";
|
||||
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
green {
|
||||
label = "bananapi-m1-plus:green:usr";
|
||||
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
red {
|
||||
label = "bananapi-m1-plus:red:usr";
|
||||
gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
red {
|
||||
label = "bananapi-m1-plus:red:usr";
|
||||
gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
mmc3_pwrseq: mmc3_pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc3_pwrseq_pin_bananapim1plus>;
|
||||
reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
|
||||
};
|
||||
mmc3_pwrseq: mmc3_pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc3_pwrseq_pin_bananapim1plus>;
|
||||
reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
|
||||
};
|
||||
|
||||
reg_gmac_3v3: gmac-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac_power_pin_bananapi>;
|
||||
regulator-name = "gmac-3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <100000>;
|
||||
enable-active-high;
|
||||
gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
reg_gmac_3v3: gmac-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac_power_pin_bananapi>;
|
||||
regulator-name = "gmac-3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <100000>;
|
||||
enable-active-high;
|
||||
gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&ahci {
|
||||
status = "okay";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&codec {
|
||||
status = "okay";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci1 {
|
||||
status = "okay";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac_pins_rgmii_a>;
|
||||
phy = <&phy1>;
|
||||
phy-mode = "rgmii";
|
||||
phy-supply = <®_gmac_3v3>;
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac_pins_rgmii_a>;
|
||||
phy = <&phy1>;
|
||||
phy-mode = "rgmii";
|
||||
phy-supply = <®_gmac_3v3>;
|
||||
status = "okay";
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins_a>;
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins_a>;
|
||||
status = "okay";
|
||||
|
||||
axp209: pmic@34 {
|
||||
compatible = "x-powers,axp209";
|
||||
reg = <0x34>;
|
||||
interrupt-parent = <&nmi_intc>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
axp209: pmic@34 {
|
||||
compatible = "x-powers,axp209";
|
||||
reg = <0x34>;
|
||||
interrupt-parent = <&nmi_intc>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&ir0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ir0_rx_pins_a>;
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ir0_rx_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
|
||||
cd-inverted;
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
|
||||
cd-inverted;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc3_pins_a>;
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
mmc-pwrseq = <&mmc3_pwrseq>;
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
enable-sdio-wakeup;
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc3_pins_a>;
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
mmc-pwrseq = <&mmc3_pwrseq>;
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
enable-sdio-wakeup;
|
||||
status = "okay";
|
||||
|
||||
brcmf: bcrmf@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-names = "host-wake";
|
||||
};
|
||||
brcmf: bcrmf@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-names = "host-wake";
|
||||
};
|
||||
};
|
||||
|
||||
&mmc3_pins_a {
|
||||
/* AP6210 requires pull-up */
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
/* AP6210 requires pull-up */
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci1 {
|
||||
status = "okay";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
gmac_power_pin_bananapi: gmac_power_pin@0 {
|
||||
allwinner,pins = "PH23";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
gmac_power_pin_bananapi: gmac_power_pin@0 {
|
||||
allwinner,pins = "PH23";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
|
||||
led_pins_bananapi: led_pins@0 {
|
||||
allwinner,pins = "PH24", "PG2";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
led_pins_bananapi: led_pins@0 {
|
||||
allwinner,pins = "PH24", "PG2";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
|
||||
mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
|
||||
allwinner,pins = "PH10";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
};
|
||||
mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
|
||||
allwinner,pins = "PH10";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
};
|
||||
|
||||
mmc3_pwrseq_pin_bananapim1plus: mmc3_pwrseq_pin@0 {
|
||||
allwinner,pins = "PH22";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
mmc3_pwrseq_pin_bananapim1plus: mmc3_pwrseq_pin@0 {
|
||||
allwinner,pins = "PH22";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins_a>;
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче