ARM: OMAP1: DMA: Moving OMAP1 DMA channel definitions to mach-omap1

Some of the omap1 dma channel definitions are used by some drivers.
For moving omap1 dma channel definitions to mach-omap1/, the used
ones should be defined locally to driver. Driver can eliminate it
by using DT, platform data, or IORESOURCE_DMA.
And moving OMAP1 DMA channel definitions to mach-omap1

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/board-h2.c

@@ -50,6 +50,7 @@
 
 #include "common.h"
 #include "board-h2.h"
+#include "dma.h"
 
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define OMAP1610_ETHR_START		0x04000300

arch/arm/mach-omap1/board-palmte.c

@@ -45,6 +45,7 @@
 #include <mach/usb.h>
 
 #include "common.h"
+#include "dma.h"
 
 #define PALMTE_USBDETECT_GPIO	0
 #define PALMTE_USB_OR_DC_GPIO	1

arch/arm/mach-omap1/board-palmtt.c

@@ -45,6 +45,7 @@
 #include <mach/usb.h>
 
 #include "common.h"
+#include "dma.h"
 
 #define PALMTT_USBDETECT_GPIO	0
 #define PALMTT_CABLE_GPIO	1

arch/arm/mach-omap1/board-palmz71.c

@@ -47,6 +47,7 @@
 #include <mach/usb.h>
 
 #include "common.h"
+#include "dma.h"
 
 #define PALMZ71_USBDETECT_GPIO	0
 #define PALMZ71_PENIRQ_GPIO	6

arch/arm/mach-omap1/board-sx1.c

@@ -45,6 +45,7 @@
 #include <mach/usb.h>
 
 #include "common.h"
+#include "dma.h"
 
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)

arch/arm/mach-omap1/devices.c

@@ -30,6 +30,7 @@
 
 #include "common.h"
 #include "clock.h"
+#include "dma.h"
 
 #if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
 

arch/arm/mach-omap1/dma.c

@@ -30,6 +30,8 @@
 
 #include <mach/irqs.h>
 
+#include "dma.h"
+
 #define OMAP1_DMA_BASE			(0xfffed800)
 #define OMAP1_LOGICAL_DMA_CH_COUNT	17
 #define OMAP1_DMA_STRIDE		0x40

arch/arm/mach-omap1/dma.h

@@ -0,0 +1,83 @@
+/*
+ *  OMAP1 DMA channel definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __OMAP1_DMA_CHANNEL_H
+#define __OMAP1_DMA_CHANNEL_H
+
+/* DMA channels for omap1 */
+#define OMAP_DMA_NO_DEVICE		0
+#define OMAP_DMA_MCSI1_TX		1
+#define OMAP_DMA_MCSI1_RX		2
+#define OMAP_DMA_I2C_RX			3
+#define OMAP_DMA_I2C_TX			4
+#define OMAP_DMA_EXT_NDMA_REQ		5
+#define OMAP_DMA_EXT_NDMA_REQ2		6
+#define OMAP_DMA_UWIRE_TX		7
+#define OMAP_DMA_MCBSP1_TX		8
+#define OMAP_DMA_MCBSP1_RX		9
+#define OMAP_DMA_MCBSP3_TX		10
+#define OMAP_DMA_MCBSP3_RX		11
+#define OMAP_DMA_UART1_TX		12
+#define OMAP_DMA_UART1_RX		13
+#define OMAP_DMA_UART2_TX		14
+#define OMAP_DMA_UART2_RX		15
+#define OMAP_DMA_MCBSP2_TX		16
+#define OMAP_DMA_MCBSP2_RX		17
+#define OMAP_DMA_UART3_TX		18
+#define OMAP_DMA_UART3_RX		19
+#define OMAP_DMA_CAMERA_IF_RX		20
+#define OMAP_DMA_MMC_TX			21
+#define OMAP_DMA_MMC_RX			22
+#define OMAP_DMA_NAND			23
+#define OMAP_DMA_IRQ_LCD_LINE		24
+#define OMAP_DMA_MEMORY_STICK		25
+#define OMAP_DMA_USB_W2FC_RX0		26
+#define OMAP_DMA_USB_W2FC_RX1		27
+#define OMAP_DMA_USB_W2FC_RX2		28
+#define OMAP_DMA_USB_W2FC_TX0		29
+#define OMAP_DMA_USB_W2FC_TX1		30
+#define OMAP_DMA_USB_W2FC_TX2		31
+
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN		32
+#define OMAP_DMA_SPI_TX			33
+#define OMAP_DMA_SPI_RX			34
+#define OMAP_DMA_CRYPTO_HASH		35
+#define OMAP_DMA_CCP_ATTN		36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY	37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0	38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0	39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1	40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1	41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2	42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2	43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3	44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3	45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4	46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4	47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5	48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5	49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6	50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6	51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7	52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7	53
+#define OMAP_DMA_MMC2_TX		54
+#define OMAP_DMA_MMC2_RX		55
+#define OMAP_DMA_CRYPTO_DES_OUT		56
+
+#endif /* __OMAP1_DMA_CHANNEL_H */

arch/arm/mach-omap1/lcd_dma.c

@@ -32,6 +32,8 @@
 #include <mach/hardware.h>
 #include <mach/lcdc.h>
 
+#include "dma.h"
+
 int omap_lcd_dma_running(void)
 {
 	/*

arch/arm/mach-omap1/mcbsp.c

@@ -27,6 +27,7 @@
 #include <mach/irqs.h>
 
 #include "iomap.h"
+#include "dma.h"
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)

arch/arm/plat-omap/include/plat/dma.h

@@ -23,74 +23,8 @@
 
 #include <linux/platform_device.h>
 
-/*
- * TODO: These dma channel defines should go away once all
- * the omap drivers hwmod adapted.
- */
-
 #define INT_DMA_LCD			25
 
-/* DMA channels for omap1 */
-#define OMAP_DMA_NO_DEVICE		0
-#define OMAP_DMA_MCSI1_TX		1
-#define OMAP_DMA_MCSI1_RX		2
-#define OMAP_DMA_I2C_RX			3
-#define OMAP_DMA_I2C_TX			4
-#define OMAP_DMA_EXT_NDMA_REQ		5
-#define OMAP_DMA_EXT_NDMA_REQ2		6
-#define OMAP_DMA_UWIRE_TX		7
-#define OMAP_DMA_MCBSP1_TX		8
-#define OMAP_DMA_MCBSP1_RX		9
-#define OMAP_DMA_MCBSP3_TX		10
-#define OMAP_DMA_MCBSP3_RX		11
-#define OMAP_DMA_UART1_TX		12
-#define OMAP_DMA_UART1_RX		13
-#define OMAP_DMA_UART2_TX		14
-#define OMAP_DMA_UART2_RX		15
-#define OMAP_DMA_MCBSP2_TX		16
-#define OMAP_DMA_MCBSP2_RX		17
-#define OMAP_DMA_UART3_TX		18
-#define OMAP_DMA_UART3_RX		19
-#define OMAP_DMA_CAMERA_IF_RX		20
-#define OMAP_DMA_MMC_TX			21
-#define OMAP_DMA_MMC_RX			22
-#define OMAP_DMA_NAND			23
-#define OMAP_DMA_IRQ_LCD_LINE		24
-#define OMAP_DMA_MEMORY_STICK		25
-#define OMAP_DMA_USB_W2FC_RX0		26
-#define OMAP_DMA_USB_W2FC_RX1		27
-#define OMAP_DMA_USB_W2FC_RX2		28
-#define OMAP_DMA_USB_W2FC_TX0		29
-#define OMAP_DMA_USB_W2FC_TX1		30
-#define OMAP_DMA_USB_W2FC_TX2		31
-
-/* These are only for 1610 */
-#define OMAP_DMA_CRYPTO_DES_IN		32
-#define OMAP_DMA_SPI_TX			33
-#define OMAP_DMA_SPI_RX			34
-#define OMAP_DMA_CRYPTO_HASH		35
-#define OMAP_DMA_CCP_ATTN		36
-#define OMAP_DMA_CCP_FIFO_NOT_EMPTY	37
-#define OMAP_DMA_CMT_APE_TX_CHAN_0	38
-#define OMAP_DMA_CMT_APE_RV_CHAN_0	39
-#define OMAP_DMA_CMT_APE_TX_CHAN_1	40
-#define OMAP_DMA_CMT_APE_RV_CHAN_1	41
-#define OMAP_DMA_CMT_APE_TX_CHAN_2	42
-#define OMAP_DMA_CMT_APE_RV_CHAN_2	43
-#define OMAP_DMA_CMT_APE_TX_CHAN_3	44
-#define OMAP_DMA_CMT_APE_RV_CHAN_3	45
-#define OMAP_DMA_CMT_APE_TX_CHAN_4	46
-#define OMAP_DMA_CMT_APE_RV_CHAN_4	47
-#define OMAP_DMA_CMT_APE_TX_CHAN_5	48
-#define OMAP_DMA_CMT_APE_RV_CHAN_5	49
-#define OMAP_DMA_CMT_APE_TX_CHAN_6	50
-#define OMAP_DMA_CMT_APE_RV_CHAN_6	51
-#define OMAP_DMA_CMT_APE_TX_CHAN_7	52
-#define OMAP_DMA_CMT_APE_RV_CHAN_7	53
-#define OMAP_DMA_MMC2_TX		54
-#define OMAP_DMA_MMC2_RX		55
-#define OMAP_DMA_CRYPTO_DES_OUT		56
-
 /* DMA channels for 24xx */
 #define OMAP24XX_DMA_NO_DEVICE		0
 #define OMAP24XX_DMA_XTI_DMA		1	/* S_DMA_0 */

drivers/media/platform/omap/omap_vout_vrfb.c

@@ -22,6 +22,8 @@
 #include "omap_voutdef.h"
 #include "omap_voutlib.h"
 
+#define OMAP_DMA_NO_DEVICE	0
+
 /*
  * Function for allocating video buffers
  */

drivers/media/platform/soc_camera/omap1_camera.c

@@ -40,6 +40,7 @@
 #define DRIVER_NAME		"omap1-camera"
 #define DRIVER_VERSION		"0.0.2"
 
+#define OMAP_DMA_CAMERA_IF_RX		20
 
 /*
  * ---------------------------------------------------------------------------

drivers/mmc/host/omap.c

@@ -84,6 +84,10 @@
 #define OMAP_MMC_CMDTYPE_AC	2
 #define OMAP_MMC_CMDTYPE_ADTC	3
 
+#define OMAP_DMA_MMC_TX		21
+#define OMAP_DMA_MMC_RX		22
+#define OMAP_DMA_MMC2_TX	54
+#define OMAP_DMA_MMC2_RX	55
 
 #define DRIVER_NAME "mmci-omap"
 

drivers/usb/gadget/omap_udc.c

@@ -61,6 +61,8 @@
 #define	DRIVER_DESC	"OMAP UDC driver"
 #define	DRIVER_VERSION	"4 October 2004"
 
+#define OMAP_DMA_USB_W2FC_TX0		29
+
 /*
  * The OMAP UDC needs _very_ early endpoint setup:  before enabling the
  * D+ pullup to allow enumeration.  That's too early for the gadget