Merge branches 'iommu/fixes', 'arm/exynos', 'arm/renesas', 'arm/smmu', 'arm/mediatek', 'arm/core', 'x86/vt-d' and 'core' into next

.mailmap

@@ -137,6 +137,7 @@ Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
 Rudolf Marek <R.Marek@sh.cvut.cz>
 Rui Saraiva <rmps@joel.ist.utl.pt>
 Sachin P Sant <ssant@in.ibm.com>
+Sarangdhar Joshi <spjoshi@codeaurora.org>
 Sam Ravnborg <sam@mars.ravnborg.org>
 Santosh Shilimkar <ssantosh@kernel.org>
 Santosh Shilimkar <santosh.shilimkar@oracle.org>
@@ -150,10 +151,13 @@ Shuah Khan <shuah@kernel.org> <shuah.kh@samsung.com>
 Simon Kelley <simon@thekelleys.org.uk>
 Stéphane Witzmann <stephane.witzmann@ubpmes.univ-bpclermont.fr>
 Stephen Hemminger <shemminger@osdl.org>
+Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
+Subhash Jadavani <subhashj@codeaurora.org>
 Sudeep Holla <sudeep.holla@arm.com> Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
 Sumit Semwal <sumit.semwal@ti.com>
 Tejun Heo <htejun@gmail.com>
 Thomas Graf <tgraf@suug.ch>
+Thomas Pedersen <twp@codeaurora.org>
 Tony Luck <tony.luck@intel.com>
 Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
 Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>

Documentation/ABI/testing/sysfs-devices-deferred_probe

@@ -1,12 +0,0 @@
-What:		/sys/devices/.../deferred_probe
-Date:		August 2016
-Contact:	Ben Hutchings <ben.hutchings@codethink.co.uk>
-Description:
-		The /sys/devices/.../deferred_probe attribute is
-		present for all devices.  If a driver detects during
-		probing a device that a related device is not yet
-		ready, it may defer probing of the first device.  The
-		kernel will retry probing the first device after any
-		other device is successfully probed.  This attribute
-		reads as 1 if probing of this device is currently
-		deferred, or 0 otherwise.

Documentation/ABI/testing/sysfs-kernel-iommu_groups

@@ -12,3 +12,15 @@ Description:	/sys/kernel/iommu_groups/ contains a number of sub-
 		file if the IOMMU driver has chosen to register a more
 		common name for the group.
 Users:
+
+What:		/sys/kernel/iommu_groups/reserved_regions
+Date: 		January 2017
+KernelVersion:  v4.11
+Contact: 	Eric Auger <eric.auger@redhat.com>
+Description:    /sys/kernel/iommu_groups/reserved_regions list IOVA
+		regions that are reserved. Not necessarily all
+		reserved regions are listed. This is typically used to
+		output direct-mapped, MSI, non mappable regions. Each
+		region is described on a single line: the 1st field is
+		the base IOVA, the second is the end IOVA and the third
+		field describes the type of the region.

Documentation/DMA-attributes.txt

@@ -143,3 +143,13 @@ So, this provides a way for drivers to avoid those error messages on calls
 where allocation failures are not a problem, and shouldn't bother the logs.
 
 NOTE: At the moment DMA_ATTR_NO_WARN is only implemented on PowerPC.
+
+DMA_ATTR_PRIVILEGED
+------------------------------
+
+Some advanced peripherals such as remote processors and GPUs perform
+accesses to DMA buffers in both privileged "supervisor" and unprivileged
+"user" modes.  This attribute is used to indicate to the DMA-mapping
+subsystem that the buffer is fully accessible at the elevated privilege
+level (and ideally inaccessible or at least read-only at the
+lesser-privileged levels).

Documentation/admin-guide/kernel-parameters.txt

@@ -106,6 +106,16 @@
 			use by PCI
 			Format: <irq>,<irq>...
 
+	acpi_mask_gpe=  [HW,ACPI]
+			Due to the existence of _Lxx/_Exx, some GPEs triggered
+			by unsupported hardware/firmware features can result in
+                        GPE floodings that cannot be automatically disabled by
+                        the GPE dispatcher.
+			This facility can be used to prevent such uncontrolled
+			GPE floodings.
+			Format: <int>
+			Support masking of GPEs numbered from 0x00 to 0x7f.
+
 	acpi_no_auto_serialize	[HW,ACPI]
 			Disable auto-serialization of AML methods
 			AML control methods that contain the opcodes to create
@@ -3811,10 +3821,11 @@
 			it if 0 is given (See Documentation/cgroup-v1/memory.txt)
 
 	swiotlb=	[ARM,IA-64,PPC,MIPS,X86]
-			Format: { <int> | force }
+			Format: { <int> | force | noforce }
 			<int> -- Number of I/O TLB slabs
 			force -- force using of bounce buffers even if they
 			         wouldn't be automatically used by the kernel
+			noforce -- Never use bounce buffers (for debugging)
 
 	switches=	[HW,M68k]
 

Documentation/block/queue-sysfs.txt

@@ -54,9 +54,9 @@ This is the hardware sector size of the device, in bytes.
 
 io_poll (RW)
 ------------
-When read, this file shows the total number of block IO polls and how
+When read, this file shows whether polling is enabled (1) or disabled
-many returned success.  Writing '0' to this file will disable polling
+(0).  Writing '0' to this file will disable polling for this device.
-for this device.  Writing any non-zero value will enable this feature.
+Writing any non-zero value will enable this feature.
 
 io_poll_delay (RW)
 ------------------

Documentation/devicetree/bindings/i2c/i2c.txt

@@ -62,6 +62,9 @@ wants to support one of the below features, it should adapt the bindings below.
 	"irq" and "wakeup" names are recognized by I2C core, other names are
 	left to individual drivers.
 
+- host-notify
+	device uses SMBus host notify protocol instead of interrupt line.
+
 - multi-master
 	states that there is another master active on this bus. The OS can use
 	this information to adapt power management to keep the arbitration awake
@@ -81,6 +84,11 @@ Binding may contain optional "interrupts" property, describing interrupts
 used by the device. I2C core will assign "irq" interrupt (or the very first
 interrupt if not using interrupt names) as primary interrupt for the slave.
 
+Alternatively, devices supporting SMbus Host Notify, and connected to
+adapters that support this feature, may use "host-notify" property. I2C
+core will create a virtual interrupt for Host Notify and assign it as
+primary interrupt for the slave.
+
 Also, if device is marked as a wakeup source, I2C core will set up "wakeup"
 interrupt for the device. If "wakeup" interrupt name is not present in the
 binding, then primary interrupt will be used as wakeup interrupt.

Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt

@@ -8,8 +8,9 @@ This driver provides a simple power button event via an Interrupt.
 Required properties:
 - compatible: should be "ti,tps65217-pwrbutton" or "ti,tps65218-pwrbutton"
 
-Required properties for TPS65218:
+Required properties:
 - interrupts: should be one of the following
+   - <2>: For controllers compatible with tps65217
    - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218
 
 Examples:
@@ -17,6 +18,7 @@ Examples:
 &tps {
 	tps65217-pwrbutton {
 		compatible = "ti,tps65217-pwrbutton";
+		interrupts = <2>;
 	};
 };
 

Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt

@@ -15,6 +15,9 @@ Properties:
   Second cell specifies the irq distribution mode to cores
      0=Round Robin; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3
 
+  The second cell in interrupts property is deprecated and may be ignored by
+  the kernel.
+
   intc accessed via the special ARC AUX register interface, hence "reg" property
   is not specified.
 

Documentation/devicetree/bindings/mtd/tango-nand.txt

@@ -5,7 +5,7 @@ Required properties:
 - compatible: "sigma,smp8758-nand"
 - reg: address/size of nfc_reg, nfc_mem, and pbus_reg
 - dmas: reference to the DMA channel used by the controller
-- dma-names: "nfc_sbox"
+- dma-names: "rxtx"
 - clocks: reference to the system clock
 - #address-cells: <1>
 - #size-cells: <0>
@@ -17,9 +17,9 @@ Example:
 
 	nandc: nand-controller@2c000 {
 		compatible = "sigma,smp8758-nand";
-		reg = <0x2c000 0x30 0x2d000 0x800 0x20000 0x1000>;
+		reg = <0x2c000 0x30>, <0x2d000 0x800>, <0x20000 0x1000>;
 		dmas = <&dma0 3>;
-		dma-names = "nfc_sbox";
+		dma-names = "rxtx";
 		clocks = <&clkgen SYS_CLK>;
 		#address-cells = <1>;
 		#size-cells = <0>;

Documentation/devicetree/bindings/net/mediatek-net.txt

@@ -7,7 +7,7 @@ have dual GMAC each represented by a child node..
 * Ethernet controller node
 
 Required properties:
-- compatible: Should be "mediatek,mt7623-eth"
+- compatible: Should be "mediatek,mt2701-eth"
 - reg: Address and length of the register set for the device
 - interrupts: Should contain the three frame engines interrupts in numeric
 	order. These are fe_int0, fe_int1 and fe_int2.

Documentation/devicetree/bindings/net/phy.txt

@@ -19,8 +19,9 @@ Optional Properties:
   specifications. If neither of these are specified, the default is to
   assume clause 22.
 
-  If the phy's identifier is known then the list may contain an entry
+  If the PHY reports an incorrect ID (or none at all) then the
-  of the form: "ethernet-phy-idAAAA.BBBB" where
+  "compatible" list may contain an entry with the correct PHY ID in the
+  form: "ethernet-phy-idAAAA.BBBB" where
      AAAA - The value of the 16 bit Phy Identifier 1 register as
             4 hex digits. This is the chip vendor OUI bits 3:18
      BBBB - The value of the 16 bit Phy Identifier 2 register as

Documentation/devicetree/bindings/net/ti,dp83867.txt

@@ -3,9 +3,11 @@
 Required properties:
 	- reg - The ID number for the phy, usually a small integer
 	- ti,rx-internal-delay - RGMII Receive Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values
+		for applicable values. Required only if interface type is
+		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_RXID
 	- ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
-		for applicable values
+		for applicable values. Required only if interface type is
+		PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID
 	- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
 		for applicable values
 

Documentation/devicetree/bindings/power/supply/tps65217_charger.txt

@@ -2,11 +2,16 @@ TPS65217 Charger
 
 Required Properties:
 -compatible: "ti,tps65217-charger"
+-interrupts: TPS65217 interrupt numbers for the AC and USB charger input change.
+             Should be <0> for the USB charger and <1> for the AC adapter.
+-interrupt-names: Should be "USB" and "AC"
 
 This node is a subnode of the tps65217 PMIC.
 
 Example:
 
 	tps65217-charger {
-		compatible = "ti,tps65090-charger";
+		compatible = "ti,tps65217-charger";
+		interrupts = <0>, <1>;
+		interrupt-names = "USB", "AC";
 	};

Documentation/devicetree/bindings/spi/sh-msiof.txt

@@ -1,17 +1,23 @@
 Renesas MSIOF spi controller
 
 Required properties:
-- compatible           : "renesas,msiof-<soctype>" for SoCs,
+- compatible           : "renesas,msiof-r8a7790" (R-Car H2)
-			 "renesas,sh-msiof" for SuperH, or
-			 "renesas,sh-mobile-msiof" for SH Mobile series.
-			 Examples with soctypes are:
-			 "renesas,msiof-r8a7790" (R-Car H2)
 			 "renesas,msiof-r8a7791" (R-Car M2-W)
 			 "renesas,msiof-r8a7792" (R-Car V2H)
 			 "renesas,msiof-r8a7793" (R-Car M2-N)
 			 "renesas,msiof-r8a7794" (R-Car E2)
 			 "renesas,msiof-r8a7796" (R-Car M3-W)
 			 "renesas,msiof-sh73a0" (SH-Mobile AG5)
+			 "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device)
+			 "renesas,rcar-gen2-msiof" (generic R-Car Gen2 compatible device)
+			 "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device)
+			 "renesas,sh-msiof"      (deprecated)
+
+			 When compatible with the generic version, nodes
+			 must list the SoC-specific version corresponding
+			 to the platform first followed by the generic
+			 version.
+
 - reg                  : A list of offsets and lengths of the register sets for
 			 the device.
 			 If only one register set is present, it is to be used
@@ -61,7 +67,8 @@ Documentation/devicetree/bindings/pinctrl/renesas,*.
 Example:
 
 	msiof0: spi@e6e20000 {
-		compatible = "renesas,msiof-r8a7791";
+		compatible = "renesas,msiof-r8a7791",
+			     "renesas,rcar-gen2-msiof";
 		reg = <0 0xe6e20000 0 0x0064>;
 		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;

Documentation/driver-api/infrastructure.rst

@@ -55,21 +55,6 @@ Device Drivers DMA Management
 .. kernel-doc:: drivers/base/dma-mapping.c
    :export:
 
-Device Drivers Power Management
--------------------------------
-
-.. kernel-doc:: drivers/base/power/main.c
-   :export:
-
-Device Drivers ACPI Support
----------------------------
-
-.. kernel-doc:: drivers/acpi/scan.c
-   :export:
-
-.. kernel-doc:: drivers/acpi/scan.c
-   :internal:
-
 Device drivers PnP support
 --------------------------
 

Documentation/filesystems/proc.txt

@@ -212,10 +212,11 @@ asynchronous manner and the value may not be very precise. To see a precise
 snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table.
 It's slow but very precise.
 
-Table 1-2: Contents of the status files (as of 4.1)
+Table 1-2: Contents of the status files (as of 4.8)
 ..............................................................................
  Field                       Content
  Name                        filename of the executable
+ Umask                       file mode creation mask
  State                       state (R is running, S is sleeping, D is sleeping
                              in an uninterruptible wait, Z is zombie,
 			     T is traced or stopped)
@@ -226,7 +227,6 @@ Table 1-2: Contents of the status files (as of 4.1)
  TracerPid                   PID of process tracing this process (0 if not)
  Uid                         Real, effective, saved set, and  file system UIDs
  Gid                         Real, effective, saved set, and  file system GIDs
- Umask                       file mode creation mask
  FDSize                      number of file descriptor slots currently allocated
  Groups                      supplementary group list
  NStgid                      descendant namespace thread group ID hierarchy
@@ -236,6 +236,7 @@ Table 1-2: Contents of the status files (as of 4.1)
  VmPeak                      peak virtual memory size
  VmSize                      total program size
  VmLck                       locked memory size
+ VmPin                       pinned memory size
  VmHWM                       peak resident set size ("high water mark")
  VmRSS                       size of memory portions. It contains the three
                              following parts (VmRSS = RssAnon + RssFile + RssShmem)

Documentation/networking/mpls-sysctl.txt

@@ -5,8 +5,8 @@ platform_labels - INTEGER
 	possible to configure forwarding for label values equal to or
 	greater than the number of platform labels.
 
-	A dense utliziation of the entries in the platform label table
+	A dense utilization of the entries in the platform label table
-	is possible and expected aas the platform labels are locally
+	is possible and expected as the platform labels are locally
 	allocated.
 
 	If the number of platform label table entries is set to 0 no

Documentation/power/states.txt

@@ -35,9 +35,7 @@ only one way to cause the system to go into the Suspend-To-RAM state (write
 The default suspend mode (ie. the one to be used without writing anything into
 /sys/power/mem_sleep) is either "deep" (if Suspend-To-RAM is supported) or
 "s2idle", but it can be overridden by the value of the "mem_sleep_default"
-parameter in the kernel command line.  On some ACPI-based systems, depending on
+parameter in the kernel command line.
-the information in the FADT, the default may be "s2idle" even if Suspend-To-RAM
-is supported.
 
 The properties of all of the sleep states are described below.
 

Documentation/vfio-mediated-device.txt

@@ -127,22 +127,22 @@ the VFIO when devices are unbound from the driver.
 Physical Device Driver Interface
 --------------------------------
 
-The physical device driver interface provides the parent_ops[3] structure to
+The physical device driver interface provides the mdev_parent_ops[3] structure
-define the APIs to manage work in the mediated core driver that is related to
+to define the APIs to manage work in the mediated core driver that is related
-the physical device.
+to the physical device.
 
-The structures in the parent_ops structure are as follows:
+The structures in the mdev_parent_ops structure are as follows:
 
 * dev_attr_groups: attributes of the parent device
 * mdev_attr_groups: attributes of the mediated device
 * supported_config: attributes to define supported configurations
 
-The functions in the parent_ops structure are as follows:
+The functions in the mdev_parent_ops structure are as follows:
 
 * create: allocate basic resources in a driver for a mediated device
 * remove: free resources in a driver when a mediated device is destroyed
 
-The callbacks in the parent_ops structure are as follows:
+The callbacks in the mdev_parent_ops structure are as follows:
 
 * open: open callback of mediated device
 * close: close callback of mediated device
@@ -151,14 +151,14 @@ The callbacks in the parent_ops structure are as follows:
 * write: write emulation callback
 * mmap: mmap emulation callback
 
-A driver should use the parent_ops structure in the function call to register
+A driver should use the mdev_parent_ops structure in the function call to
-itself with the mdev core driver:
+register itself with the mdev core driver:
 
 extern int  mdev_register_device(struct device *dev,
-                                 const struct parent_ops *ops);
+                                 const struct mdev_parent_ops *ops);
 
-However, the parent_ops structure is not required in the function call that a
+However, the mdev_parent_ops structure is not required in the function call
-driver should use to unregister itself with the mdev core driver:
+that a driver should use to unregister itself with the mdev core driver:
 
 extern void mdev_unregister_device(struct device *dev);
 
@@ -223,6 +223,9 @@ Directories and files under the sysfs for Each Physical Device
 
 	sprintf(buf, "%s-%s", dev_driver_string(parent->dev), group->name);
 
+  (or using mdev_parent_dev(mdev) to arrive at the parent device outside
+   of the core mdev code)
+
 * device_api
 
   This attribute should show which device API is being created, for example,
@@ -394,5 +397,5 @@ References
 
 [1] See Documentation/vfio.txt for more information on VFIO.
 [2] struct mdev_driver in include/linux/mdev.h
-[3] struct parent_ops in include/linux/mdev.h
+[3] struct mdev_parent_ops in include/linux/mdev.h
 [4] struct vfio_iommu_driver_ops in include/linux/vfio.h

Documentation/vm/page_frags

@@ -0,0 +1,42 @@
+Page fragments
+--------------
+
+A page fragment is an arbitrary-length arbitrary-offset area of memory
+which resides within a 0 or higher order compound page.  Multiple
+fragments within that page are individually refcounted, in the page's
+reference counter.
+
+The page_frag functions, page_frag_alloc and page_frag_free, provide a
+simple allocation framework for page fragments.  This is used by the
+network stack and network device drivers to provide a backing region of
+memory for use as either an sk_buff->head, or to be used in the "frags"
+portion of skb_shared_info.
+
+In order to make use of the page fragment APIs a backing page fragment
+cache is needed.  This provides a central point for the fragment allocation
+and tracks allows multiple calls to make use of a cached page.  The
+advantage to doing this is that multiple calls to get_page can be avoided
+which can be expensive at allocation time.  However due to the nature of
+this caching it is required that any calls to the cache be protected by
+either a per-cpu limitation, or a per-cpu limitation and forcing interrupts
+to be disabled when executing the fragment allocation.
+
+The network stack uses two separate caches per CPU to handle fragment
+allocation.  The netdev_alloc_cache is used by callers making use of the
+__netdev_alloc_frag and __netdev_alloc_skb calls.  The napi_alloc_cache is
+used by callers of the __napi_alloc_frag and __napi_alloc_skb calls.  The
+main difference between these two calls is the context in which they may be
+called.  The "netdev" prefixed functions are usable in any context as these
+functions will disable interrupts, while the "napi" prefixed functions are
+only usable within the softirq context.
+
+Many network device drivers use a similar methodology for allocating page
+fragments, but the page fragments are cached at the ring or descriptor
+level.  In order to enable these cases it is necessary to provide a generic
+way of tearing down a page cache.  For this reason __page_frag_cache_drain
+was implemented.  It allows for freeing multiple references from a single
+page via a single call.  The advantage to doing this is that it allows for
+cleaning up the multiple references that were added to a page in order to
+avoid calling get_page per allocation.
+
+Alexander Duyck, Nov 29, 2016.

MAINTAINERS

@@ -81,7 +81,6 @@ Descriptions of section entries:
 	Q: Patchwork web based patch tracking system site
 	T: SCM tree type and location.
 	   Type is one of: git, hg, quilt, stgit, topgit
-	B: Bug tracking system location.
 	S: Status, one of the following:
 	   Supported:	Someone is actually paid to look after this.
 	   Maintained:	Someone actually looks after it.
@@ -977,6 +976,7 @@ M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.armlinux.org.uk/
 S:	Maintained
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git
 F:	arch/arm/
 
 ARM SUB-ARCHITECTURES
@@ -1154,6 +1154,7 @@ ARM/CLKDEV SUPPORT
 M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git clkdev
 F:	arch/arm/include/asm/clkdev.h
 F:	drivers/clk/clkdev.c
 
@@ -1689,6 +1690,7 @@ M:	Krzysztof Kozlowski <krzk@kernel.org>
 R:	Javier Martinez Canillas <javier@osg.samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+Q:	https://patchwork.kernel.org/project/linux-samsung-soc/list/
 S:	Maintained
 F:	arch/arm/boot/dts/s3c*
 F:	arch/arm/boot/dts/s5p*
@@ -2194,14 +2196,6 @@ L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/atmel
 
-ATMEL DMA DRIVER
-M:	Nicolas Ferre <nicolas.ferre@atmel.com>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
-F:	drivers/dma/at_hdmac.c
-F:	drivers/dma/at_hdmac_regs.h
-F:	include/linux/platform_data/dma-atmel.h
-
 ATMEL XDMA DRIVER
 M:	Ludovic Desroches <ludovic.desroches@atmel.com>
 L:	linux-arm-kernel@lists.infradead.org
@@ -3573,7 +3567,7 @@ F:	drivers/infiniband/hw/cxgb3/
 F:	include/uapi/rdma/cxgb3-abi.h
 
 CXGB4 ETHERNET DRIVER (CXGB4)
-M:	Hariprasad S <hariprasad@chelsio.com>
+M:	Ganesh Goudar <ganeshgr@chelsio.com>
 L:	netdev@vger.kernel.org
 W:	http://www.chelsio.com
 S:	Supported
@@ -3800,6 +3794,7 @@ F:	include/linux/devcoredump.h
 DEVICE FREQUENCY (DEVFREQ)
 M:	MyungJoo Ham <myungjoo.ham@samsung.com>
 M:	Kyungmin Park <kyungmin.park@samsung.com>
+R:	Chanwoo Choi <cw00.choi@samsung.com>
 L:	linux-pm@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq.git
 S:	Maintained
@@ -4105,18 +4100,24 @@ F:	drivers/gpu/drm/bridge/
 
 DRM DRIVER FOR BOCHS VIRTUAL GPU
 M:	Gerd Hoffmann <kraxel@redhat.com>
-S:	Odd Fixes
+L:	virtualization@lists.linux-foundation.org
+T:	git git://git.kraxel.org/linux drm-qemu
+S:	Maintained
 F:	drivers/gpu/drm/bochs/
 
 DRM DRIVER FOR QEMU'S CIRRUS DEVICE
 M:	Dave Airlie <airlied@redhat.com>
-S:	Odd Fixes
+M:	Gerd Hoffmann <kraxel@redhat.com>
+L:	virtualization@lists.linux-foundation.org
+T:	git git://git.kraxel.org/linux drm-qemu
+S:	Obsolete
+W:	https://www.kraxel.org/blog/2014/10/qemu-using-cirrus-considered-harmful/
 F:	drivers/gpu/drm/cirrus/
 
 RADEON and AMDGPU DRM DRIVERS
 M:	Alex Deucher <alexander.deucher@amd.com>
 M:	Christian König <christian.koenig@amd.com>
-L:	dri-devel@lists.freedesktop.org
+L:	amd-gfx@lists.freedesktop.org
 T:	git git://people.freedesktop.org/~agd5f/linux
 S:	Supported
 F:	drivers/gpu/drm/radeon/
@@ -4152,7 +4153,7 @@ F:	Documentation/gpu/i915.rst
 INTEL GVT-g DRIVERS (Intel GPU Virtualization)
 M:      Zhenyu Wang <zhenyuw@linux.intel.com>
 M:      Zhi Wang <zhi.a.wang@intel.com>
-L:      igvt-g-dev@lists.01.org
+L:      intel-gvt-dev@lists.freedesktop.org
 L:      intel-gfx@lists.freedesktop.org
 W:      https://01.org/igvt-g
 T:      git https://github.com/01org/gvt-linux.git
@@ -4303,7 +4304,10 @@ F:	Documentation/devicetree/bindings/display/renesas,du.txt
 
 DRM DRIVER FOR QXL VIRTUAL GPU
 M:	Dave Airlie <airlied@redhat.com>
-S:	Odd Fixes
+M:	Gerd Hoffmann <kraxel@redhat.com>
+L:	virtualization@lists.linux-foundation.org
+T:	git git://git.kraxel.org/linux drm-qemu
+S:	Maintained
 F:	drivers/gpu/drm/qxl/
 F:	include/uapi/drm/qxl_drm.h
 
@@ -5080,9 +5084,11 @@ F:	drivers/net/wan/dlci.c
 F:	drivers/net/wan/sdla.c
 
 FRAMEBUFFER LAYER
+M:	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
 L:	linux-fbdev@vger.kernel.org
+T:	git git://github.com/bzolnier/linux.git
 Q:	http://patchwork.kernel.org/project/linux-fbdev/list/
-S:	Orphan
+S:	Maintained
 F:	Documentation/fb/
 F:	drivers/video/
 F:	include/video/
@@ -5504,6 +5510,7 @@ M:	Alex Elder <elder@kernel.org>
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 S:	Maintained
 F:	drivers/staging/greybus/
+L:	greybus-dev@lists.linaro.org
 
 GREYBUS AUDIO PROTOCOLS DRIVERS
 M:	Vaibhav Agarwal <vaibhav.sr@gmail.com>
@@ -5961,6 +5968,7 @@ F:	drivers/media/platform/sti/hva
 Hyper-V CORE AND DRIVERS
 M:	"K. Y. Srinivasan" <kys@microsoft.com>
 M:	Haiyang Zhang <haiyangz@microsoft.com>
+M:	Stephen Hemminger <sthemmin@microsoft.com>
 L:	devel@linuxdriverproject.org
 S:	Maintained
 F:	arch/x86/include/asm/mshyperv.h
@@ -7701,8 +7709,10 @@ F:	drivers/net/dsa/mv88e6xxx/
 F:	Documentation/devicetree/bindings/net/dsa/marvell.txt
 
 MARVELL ARMADA DRM SUPPORT
-M:	Russell King <rmk+kernel@armlinux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 S:	Maintained
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-armada-devel
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-armada-fixes
 F:	drivers/gpu/drm/armada/
 F:	include/uapi/drm/armada_drm.h
 F:	Documentation/devicetree/bindings/display/armada/
@@ -8174,6 +8184,15 @@ S:	Maintained
 F:	drivers/tty/serial/atmel_serial.c
 F:	include/linux/atmel_serial.h
 
+MICROCHIP / ATMEL DMA DRIVER
+M:	Ludovic Desroches <ludovic.desroches@microchip.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	dmaengine@vger.kernel.org
+S:	Supported
+F:	drivers/dma/at_hdmac.c
+F:	drivers/dma/at_hdmac_regs.h
+F:	include/linux/platform_data/dma-atmel.h
+
 MICROCHIP / ATMEL ISC DRIVER
 M:	Songjun Wu <songjun.wu@microchip.com>
 L:	linux-media@vger.kernel.org
@@ -8852,17 +8871,22 @@ F:	drivers/video/fbdev/nvidia/
 NVM EXPRESS DRIVER
 M:	Keith Busch <keith.busch@intel.com>
 M:	Jens Axboe <axboe@fb.com>
+M:	Christoph Hellwig <hch@lst.de>
+M:	Sagi Grimberg <sagi@grimberg.me>
 L:	linux-nvme@lists.infradead.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
+T:	git://git.infradead.org/nvme.git
-W:	https://kernel.googlesource.com/pub/scm/linux/kernel/git/axboe/linux-block/
+W:	http://git.infradead.org/nvme.git
 S:	Supported
 F:	drivers/nvme/host/
 F:	include/linux/nvme.h
+F:	include/uapi/linux/nvme_ioctl.h
 
 NVM EXPRESS TARGET DRIVER
 M:	Christoph Hellwig <hch@lst.de>
 M:	Sagi Grimberg <sagi@grimberg.me>
 L:	linux-nvme@lists.infradead.org
+T:	git://git.infradead.org/nvme.git
+W:	http://git.infradead.org/nvme.git
 S:	Supported
 F:	drivers/nvme/target/
 
@@ -8893,8 +8917,10 @@ S:	Supported
 F:	drivers/nfc/nxp-nci
 
 NXP TDA998X DRM DRIVER
-M:	Russell King <rmk+kernel@armlinux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 S:	Supported
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-tda998x-devel
+T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-tda998x-fixes
 F:	drivers/gpu/drm/i2c/tda998x_drv.c
 F:	include/drm/i2c/tda998x.h
 
@@ -9842,7 +9868,7 @@ M:	Mark Rutland <mark.rutland@arm.com>
 M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
-F:	drivers/firmware/psci.c
+F:	drivers/firmware/psci*.c
 F:	include/linux/psci.h
 F:	include/uapi/linux/psci.h
 
@@ -10169,7 +10195,6 @@ F:	drivers/media/tuners/qt1010*
 QUALCOMM ATHEROS ATH9K WIRELESS DRIVER
 M:	QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
 L:	linux-wireless@vger.kernel.org
-L:	ath9k-devel@lists.ath9k.org
 W:	http://wireless.kernel.org/en/users/Drivers/ath9k
 S:	Supported
 F:	drivers/net/wireless/ath/ath9k/
@@ -13040,7 +13065,7 @@ F:	drivers/input/serio/userio.c
 F:	include/uapi/linux/userio.h
 
 VIRTIO CONSOLE DRIVER
-M:	Amit Shah <amit.shah@redhat.com>
+M:	Amit Shah <amit@kernel.org>
 L:	virtualization@lists.linux-foundation.org
 S:	Maintained
 F:	drivers/char/virtio_console.c
@@ -13075,6 +13100,7 @@ M:	David Airlie <airlied@linux.ie>
 M:	Gerd Hoffmann <kraxel@redhat.com>
 L:	dri-devel@lists.freedesktop.org
 L:	virtualization@lists.linux-foundation.org
+T:	git git://git.kraxel.org/linux drm-qemu
 S:	Maintained
 F:	drivers/gpu/drm/virtio/
 F:	include/uapi/linux/virtio_gpu.h
@@ -13426,6 +13452,7 @@ F:	arch/x86/
 
 X86 PLATFORM DRIVERS
 M:	Darren Hart <dvhart@infradead.org>
+M:	Andy Shevchenko <andy@infradead.org>
 L:	platform-driver-x86@vger.kernel.org
 T:	git git://git.infradead.org/users/dvhart/linux-platform-drivers-x86.git
 S:	Maintained
@@ -13527,11 +13554,11 @@ F:	arch/x86/xen/*swiotlb*
 F:	drivers/xen/*swiotlb*
 
 XFS FILESYSTEM
-M:	Dave Chinner <david@fromorbit.com>
+M:	Darrick J. Wong <darrick.wong@oracle.com>
 M:	linux-xfs@vger.kernel.org
 L:	linux-xfs@vger.kernel.org
 W:	http://xfs.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs.git
+T:	git git://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git
 S:	Supported
 F:	Documentation/filesystems/xfs.txt
 F:	fs/xfs/
@@ -13597,6 +13624,7 @@ F:	drivers/net/hamradio/z8530.h
 
 ZBUD COMPRESSED PAGE ALLOCATOR
 M:	Seth Jennings <sjenning@redhat.com>
+M:	Dan Streetman <ddstreet@ieee.org>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/zbud.c
@@ -13652,6 +13680,7 @@ F:	Documentation/vm/zsmalloc.txt
 
 ZSWAP COMPRESSED SWAP CACHING
 M:	Seth Jennings <sjenning@redhat.com>
+M:	Dan Streetman <ddstreet@ieee.org>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/zswap.c

Makefile

@@ -1,8 +1,8 @@
 VERSION = 4
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc7
-NAME = Roaring Lionus
+NAME = Fearless Coyote
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -797,7 +797,7 @@ KBUILD_CFLAGS   += $(call cc-option,-Werror=incompatible-pointer-types)
 KBUILD_ARFLAGS := $(call ar-option,D)
 
 # check for 'asm goto'
-ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC) $(KBUILD_CFLAGS)), y)
 	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
 	KBUILD_AFLAGS += -DCC_HAVE_ASM_GOTO
 endif

arch/arc/Kconfig

@@ -29,7 +29,7 @@ config ARC
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_MEMBLOCK
-	select HAVE_MOD_ARCH_SPECIFIC if ARC_DW2_UNWIND
+	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
 	select HANDLE_DOMAIN_IRQ

arch/arc/include/asm/cache.h

@@ -67,7 +67,7 @@ extern unsigned long perip_base, perip_end;
 #define ARC_REG_IC_PTAG_HI	0x1F
 
 /* Bit val in IC_CTRL */
-#define IC_CTRL_CACHE_DISABLE   0x1
+#define IC_CTRL_DIS		0x1
 
 /* Data cache related Auxiliary registers */
 #define ARC_REG_DC_BCR		0x72	/* Build Config reg */
@@ -80,8 +80,9 @@ extern unsigned long perip_base, perip_end;
 #define ARC_REG_DC_PTAG_HI	0x5F
 
 /* Bit val in DC_CTRL */
-#define DC_CTRL_INV_MODE_FLUSH  0x40
+#define DC_CTRL_DIS		0x001
-#define DC_CTRL_FLUSH_STATUS    0x100
+#define DC_CTRL_INV_MODE_FLUSH	0x040
+#define DC_CTRL_FLUSH_STATUS	0x100
 
 /*System-level cache (L2 cache) related Auxiliary registers */
 #define ARC_REG_SLC_CFG		0x901
@@ -92,8 +93,8 @@ extern unsigned long perip_base, perip_end;
 #define ARC_REG_SLC_RGN_END	0x916
 
 /* Bit val in SLC_CONTROL */
+#define SLC_CTRL_DIS		0x001
 #define SLC_CTRL_IM		0x040
-#define SLC_CTRL_DISABLE	0x001
 #define SLC_CTRL_BUSY		0x100
 #define SLC_CTRL_RGN_OP_INV	0x200
 

arch/arc/include/asm/delay.h

@@ -26,7 +26,9 @@ static inline void __delay(unsigned long loops)
 	"	lp  1f			\n"
 	"	nop			\n"
 	"1:				\n"
-	: : "r"(loops));
+	:
+        : "r"(loops)
+        : "lp_count");
 }
 
 extern void __bad_udelay(void);

arch/arc/include/asm/entry-arcv2.h

@@ -16,6 +16,7 @@
 	;
 	; Now manually save: r12, sp, fp, gp, r25
 
+	PUSH	r30
 	PUSH	r12
 
 	; Saving pt_regs->sp correctly requires some extra work due to the way
@@ -72,6 +73,7 @@
 	POPAX	AUX_USER_SP
 1:
 	POP	r12
+	POP	r30
 
 .endm
 

arch/arc/include/asm/module.h

@@ -14,13 +14,13 @@
 
 #include <asm-generic/module.h>
 
-#ifdef CONFIG_ARC_DW2_UNWIND
 struct mod_arch_specific {
+#ifdef CONFIG_ARC_DW2_UNWIND
 	void *unw_info;
 	int unw_sec_idx;
+#endif
 	const char *secstr;
 };
-#endif
 
 #define MODULE_PROC_FAMILY "ARC700"
 

arch/arc/include/asm/ptrace.h

@@ -84,7 +84,7 @@ struct pt_regs {
 	unsigned long fp;
 	unsigned long sp;	/* user/kernel sp depending on where we came from  */
 
-	unsigned long r12;
+	unsigned long r12, r30;
 
 	/*------- Below list auto saved by h/w -----------*/
 	unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;

arch/arc/include/asm/setup.h

@@ -31,6 +31,7 @@ extern int root_mountflags, end_mem;
 
 void setup_processor(void);
 void __init setup_arch_memory(void);
+long __init arc_get_mem_sz(void);
 
 /* Helpers used in arc_*_mumbojumbo routines */
 #define IS_AVAIL1(v, s)		((v) ? s : "")

arch/arc/kernel/head.S

@@ -71,14 +71,14 @@ ENTRY(stext)
 	GET_CPU_ID  r5
 	cmp	r5, 0
 	mov.nz	r0, r5
-#ifdef CONFIG_ARC_SMP_HALT_ON_RESET
+	bz	.Lmaster_proceed
-	; Non-Master can proceed as system would be booted sufficiently
+
-	jnz	first_lines_of_secondary
-#else
 	; Non-Masters wait for Master to boot enough and bring them up
-	jnz	arc_platform_smp_wait_to_boot
+	; when they resume, tail-call to entry point
-#endif
+	mov	blink, @first_lines_of_secondary
-	; Master falls thru
+	j	arc_platform_smp_wait_to_boot
+
+.Lmaster_proceed:
 #endif
 
 	; Clear BSS before updating any globals

arch/arc/kernel/intc-arcv2.c

@@ -77,20 +77,20 @@ void arc_init_IRQ(void)
 
 static void arcv2_irq_mask(struct irq_data *data)
 {
-	write_aux_reg(AUX_IRQ_SELECT, data->irq);
+	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
 	write_aux_reg(AUX_IRQ_ENABLE, 0);
 }
 
 static void arcv2_irq_unmask(struct irq_data *data)
 {
-	write_aux_reg(AUX_IRQ_SELECT, data->irq);
+	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
 	write_aux_reg(AUX_IRQ_ENABLE, 1);
 }
 
 void arcv2_irq_enable(struct irq_data *data)
 {
 	/* set default priority */
-	write_aux_reg(AUX_IRQ_SELECT, data->irq);
+	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
 	write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
 
 	/*

arch/arc/kernel/intc-compact.c

@@ -57,7 +57,7 @@ static void arc_irq_mask(struct irq_data *data)
 	unsigned int ienb;
 
 	ienb = read_aux_reg(AUX_IENABLE);
-	ienb &= ~(1 << data->irq);
+	ienb &= ~(1 << data->hwirq);
 	write_aux_reg(AUX_IENABLE, ienb);
 }
 
@@ -66,7 +66,7 @@ static void arc_irq_unmask(struct irq_data *data)
 	unsigned int ienb;
 
 	ienb = read_aux_reg(AUX_IENABLE);
-	ienb |= (1 << data->irq);
+	ienb |= (1 << data->hwirq);
 	write_aux_reg(AUX_IENABLE, ienb);
 }
 

arch/arc/kernel/mcip.c

@@ -10,6 +10,7 @@
 
 #include <linux/smp.h>
 #include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/spinlock.h>
 #include <soc/arc/mcip.h>
 #include <asm/irqflags-arcv2.h>
@@ -92,11 +93,10 @@ static void mcip_probe_n_setup(void)
 	READ_BCR(ARC_REG_MCIP_BCR, mp);
 
 	sprintf(smp_cpuinfo_buf,
-		"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s%s\n",
+		"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s\n",
 		mp.ver, mp.num_cores,
 		IS_AVAIL1(mp.ipi, "IPI "),
 		IS_AVAIL1(mp.idu, "IDU "),
-		IS_AVAIL1(mp.llm, "LLM "),
 		IS_AVAIL1(mp.dbg, "DEBUG "),
 		IS_AVAIL1(mp.gfrc, "GFRC"));
 
@@ -174,7 +174,6 @@ static void idu_irq_unmask(struct irq_data *data)
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
 }
 
-#ifdef CONFIG_SMP
 static int
 idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
 		     bool force)
@@ -204,12 +203,27 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
 
 	return IRQ_SET_MASK_OK;
 }
-#endif
+
+static void idu_irq_enable(struct irq_data *data)
+{
+	/*
+	 * By default send all common interrupts to all available online CPUs.
+	 * The affinity of common interrupts in IDU must be set manually since
+	 * in some cases the kernel will not call irq_set_affinity() by itself:
+	 *   1. When the kernel is not configured with support of SMP.
+	 *   2. When the kernel is configured with support of SMP but upper
+	 *      interrupt controllers does not support setting of the affinity
+	 *      and cannot propagate it to IDU.
+	 */
+	idu_irq_set_affinity(data, cpu_online_mask, false);
+	idu_irq_unmask(data);
+}
 
 static struct irq_chip idu_irq_chip = {
 	.name			= "MCIP IDU Intc",
 	.irq_mask		= idu_irq_mask,
 	.irq_unmask		= idu_irq_unmask,
+	.irq_enable		= idu_irq_enable,
 #ifdef CONFIG_SMP
 	.irq_set_affinity       = idu_irq_set_affinity,
 #endif
@@ -221,10 +235,13 @@ static irq_hw_number_t idu_first_hwirq;
 static void idu_cascade_isr(struct irq_desc *desc)
 {
 	struct irq_domain *idu_domain = irq_desc_get_handler_data(desc);
+	struct irq_chip *core_chip = irq_desc_get_chip(desc);
 	irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc));
 	irq_hw_number_t idu_hwirq = core_hwirq - idu_first_hwirq;
 
+	chained_irq_enter(core_chip, desc);
 	generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq));
+	chained_irq_exit(core_chip, desc);
 }
 
 static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq)
@@ -239,36 +256,14 @@ static int idu_irq_xlate(struct irq_domain *d, struct device_node *n,
 			 const u32 *intspec, unsigned int intsize,
 			 irq_hw_number_t *out_hwirq, unsigned int *out_type)
 {
-	irq_hw_number_t hwirq = *out_hwirq = intspec[0];
+	/*
-	int distri = intspec[1];
+	 * Ignore value of interrupt distribution mode for common interrupts in
-	unsigned long flags;
+	 * IDU which resides in intspec[1] since setting an affinity using value
-
+	 * from Device Tree is deprecated in ARC.
+	 */
+	*out_hwirq = intspec[0];
 	*out_type = IRQ_TYPE_NONE;
 
-	/* XXX: validate distribution scheme again online cpu mask */
-	if (distri == 0) {
-		/* 0 - Round Robin to all cpus, otherwise 1 bit per core */
-		raw_spin_lock_irqsave(&mcip_lock, flags);
-		idu_set_dest(hwirq, BIT(num_online_cpus()) - 1);
-		idu_set_mode(hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_RR);
-		raw_spin_unlock_irqrestore(&mcip_lock, flags);
-	} else {
-		/*
-		 * DEST based distribution for Level Triggered intr can only
-		 * have 1 CPU, so generalize it to always contain 1 cpu
-		 */
-		int cpu = ffs(distri);
-
-		if (cpu != fls(distri))
-			pr_warn("IDU irq %lx distri mode set to cpu %x\n",
-				hwirq, cpu);
-
-		raw_spin_lock_irqsave(&mcip_lock, flags);
-		idu_set_dest(hwirq, cpu);
-		idu_set_mode(hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_DEST);
-		raw_spin_unlock_irqrestore(&mcip_lock, flags);
-	}
-
 	return 0;
 }
 

arch/arc/kernel/module.c

@@ -32,8 +32,8 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 #ifdef CONFIG_ARC_DW2_UNWIND
 	mod->arch.unw_sec_idx = 0;
 	mod->arch.unw_info = NULL;
-	mod->arch.secstr = secstr;
 #endif
+	mod->arch.secstr = secstr;
 	return 0;
 }
 
@@ -113,8 +113,10 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 
 	}
 
+#ifdef CONFIG_ARC_DW2_UNWIND
 	if (strcmp(module->arch.secstr+sechdrs[tgtsec].sh_name, ".eh_frame") == 0)
 		module->arch.unw_sec_idx = tgtsec;
+#endif
 
 	return 0;
 

arch/arc/kernel/smp.c

@@ -90,22 +90,37 @@ void __init smp_cpus_done(unsigned int max_cpus)
  */
 static volatile int wake_flag;
 
+#ifdef CONFIG_ISA_ARCOMPACT
+
+#define __boot_read(f)		f
+#define __boot_write(f, v)	f = v
+
+#else
+
+#define __boot_read(f)		arc_read_uncached_32(&f)
+#define __boot_write(f, v)	arc_write_uncached_32(&f, v)
+
+#endif
+
 static void arc_default_smp_cpu_kick(int cpu, unsigned long pc)
 {
 	BUG_ON(cpu == 0);
-	wake_flag = cpu;
+
+	__boot_write(wake_flag, cpu);
 }
 
 void arc_platform_smp_wait_to_boot(int cpu)
 {
-	while (wake_flag != cpu)
+	/* for halt-on-reset, we've waited already */
+	if (IS_ENABLED(CONFIG_ARC_SMP_HALT_ON_RESET))
+		return;
+
+	while (__boot_read(wake_flag) != cpu)
 		;
 
-	wake_flag = 0;
+	__boot_write(wake_flag, 0);
-	__asm__ __volatile__("j @first_lines_of_secondary	\n");
 }
 
-
 const char *arc_platform_smp_cpuinfo(void)
 {
 	return plat_smp_ops.info ? : "";

arch/arc/kernel/unaligned.c

@@ -241,8 +241,9 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 	if (state.fault)
 		goto fault;
 
+	/* clear any remanants of delay slot */
 	if (delay_mode(regs)) {
-		regs->ret = regs->bta;
+		regs->ret = regs->bta ~1U;
 		regs->status32 &= ~STATUS_DE_MASK;
 	} else {
 		regs->ret += state.instr_len;

arch/arc/mm/cache.c

@@ -23,7 +23,7 @@
 
 static int l2_line_sz;
 static int ioc_exists;
-int slc_enable = 1, ioc_enable = 0;
+int slc_enable = 1, ioc_enable = 1;
 unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */
 unsigned long perip_end = 0xFFFFFFFF; /* legacy value */
 
@@ -271,7 +271,11 @@ void __cache_line_loop_v2(phys_addr_t paddr, unsigned long vaddr,
 
 /*
  * For ARC700 MMUv3 I-cache and D-cache flushes
- * Also reused for HS38 aliasing I-cache configuration
+ *  - ARC700 programming model requires paddr and vaddr be passed in seperate
+ *    AUX registers (*_IV*L and *_PTAG respectively) irrespective of whether the
+ *    caches actually alias or not.
+ * -  For HS38, only the aliasing I-cache configuration uses the PTAG reg
+ *    (non aliasing I-cache version doesn't; while D-cache can't possibly alias)
  */
 static inline
 void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr,
@@ -458,6 +462,21 @@ static inline void __dc_entire_op(const int op)
 	__after_dc_op(op);
 }
 
+static inline void __dc_disable(void)
+{
+	const int r = ARC_REG_DC_CTRL;
+
+	__dc_entire_op(OP_FLUSH_N_INV);
+	write_aux_reg(r, read_aux_reg(r) | DC_CTRL_DIS);
+}
+
+static void __dc_enable(void)
+{
+	const int r = ARC_REG_DC_CTRL;
+
+	write_aux_reg(r, read_aux_reg(r) & ~DC_CTRL_DIS);
+}
+
 /* For kernel mappings cache operation: index is same as paddr */
 #define __dc_line_op_k(p, sz, op)	__dc_line_op(p, p, sz, op)
 
@@ -483,6 +502,8 @@ static inline void __dc_line_op(phys_addr_t paddr, unsigned long vaddr,
 #else
 
 #define __dc_entire_op(op)
+#define __dc_disable()
+#define __dc_enable()
 #define __dc_line_op(paddr, vaddr, sz, op)
 #define __dc_line_op_k(paddr, sz, op)
 
@@ -597,6 +618,40 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op)
 #endif
 }
 
+noinline static void slc_entire_op(const int op)
+{
+	unsigned int ctrl, r = ARC_REG_SLC_CTRL;
+
+	ctrl = read_aux_reg(r);
+
+	if (!(op & OP_FLUSH))		/* i.e. OP_INV */
+		ctrl &= ~SLC_CTRL_IM;	/* clear IM: Disable flush before Inv */
+	else
+		ctrl |= SLC_CTRL_IM;
+
+	write_aux_reg(r, ctrl);
+
+	write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
+
+	/* Important to wait for flush to complete */
+	while (read_aux_reg(r) & SLC_CTRL_BUSY);
+}
+
+static inline void arc_slc_disable(void)
+{
+	const int r = ARC_REG_SLC_CTRL;
+
+	slc_entire_op(OP_FLUSH_N_INV);
+	write_aux_reg(r, read_aux_reg(r) | SLC_CTRL_DIS);
+}
+
+static inline void arc_slc_enable(void)
+{
+	const int r = ARC_REG_SLC_CTRL;
+
+	write_aux_reg(r, read_aux_reg(r) & ~SLC_CTRL_DIS);
+}
+
 /***********************************************************
  * Exported APIs
  */
@@ -923,21 +978,54 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags)
 	return 0;
 }
 
-void arc_cache_init(void)
+/*
+ * IO-Coherency (IOC) setup rules:
+ *
+ * 1. Needs to be at system level, so only once by Master core
+ *    Non-Masters need not be accessing caches at that time
+ *    - They are either HALT_ON_RESET and kick started much later or
+ *    - if run on reset, need to ensure that arc_platform_smp_wait_to_boot()
+ *      doesn't perturb caches or coherency unit
+ *
+ * 2. caches (L1 and SLC) need to be purged (flush+inv) before setting up IOC,
+ *    otherwise any straggler data might behave strangely post IOC enabling
+ *
+ * 3. All Caches need to be disabled when setting up IOC to elide any in-flight
+ *    Coherency transactions
+ */
+noinline void __init arc_ioc_setup(void)
 {
-	unsigned int __maybe_unused cpu = smp_processor_id();
+	unsigned int ap_sz;
-	char str[256];
 
-	printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
+	/* Flush + invalidate + disable L1 dcache */
+	__dc_disable();
+
+	/* Flush + invalidate SLC */
+	if (read_aux_reg(ARC_REG_SLC_BCR))
+		slc_entire_op(OP_FLUSH_N_INV);
+
+	/* IOC Aperture start: TDB: handle non default CONFIG_LINUX_LINK_BASE */
+	write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000);
 
 	/*
-	 * Only master CPU needs to execute rest of function:
+	 * IOC Aperture size:
-	 *  - Assume SMP so all cores will have same cache config so
+	 *   decoded as 2 ^ (SIZE + 2) KB: so setting 0x11 implies 512M
-	 *    any geomtry checks will be same for all
+	 * TBD: fix for PGU + 1GB of low mem
-	 *  - IOC setup / dma callbacks only need to be setup once
+	 * TBD: fix for PAE
 	 */
-	if (cpu)
+	ap_sz = order_base_2(arc_get_mem_sz()/1024) - 2;
-		return;
+	write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, ap_sz);
+
+	write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
+	write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
+
+	/* Re-enable L1 dcache */
+	__dc_enable();
+}
+
+void __init arc_cache_init_master(void)
+{
+	unsigned int __maybe_unused cpu = smp_processor_id();
 
 	if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
 		struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
@@ -985,30 +1073,14 @@ void arc_cache_init(void)
 		}
 	}
 
-	if (is_isa_arcv2() && l2_line_sz && !slc_enable) {
+	/* Note that SLC disable not formally supported till HS 3.0 */
+	if (is_isa_arcv2() && l2_line_sz && !slc_enable)
+		arc_slc_disable();
 
-		/* IM set : flush before invalidate */
+	if (is_isa_arcv2() && ioc_enable)
-		write_aux_reg(ARC_REG_SLC_CTRL,
+		arc_ioc_setup();
-			read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_IM);
-
-		write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
-
-		/* Important to wait for flush to complete */
-		while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
-		write_aux_reg(ARC_REG_SLC_CTRL,
-			read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_DISABLE);
-	}
 
 	if (is_isa_arcv2() && ioc_enable) {
-		/* IO coherency base - 0x8z */
-		write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000);
-		/* IO coherency aperture size - 512Mb: 0x8z-0xAz */
-		write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11);
-		/* Enable partial writes */
-		write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
-		/* Enable IO coherency */
-		write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
-
 		__dma_cache_wback_inv = __dma_cache_wback_inv_ioc;
 		__dma_cache_inv = __dma_cache_inv_ioc;
 		__dma_cache_wback = __dma_cache_wback_ioc;
@@ -1022,3 +1094,20 @@ void arc_cache_init(void)
 		__dma_cache_wback = __dma_cache_wback_l1;
 	}
 }
+
+void __ref arc_cache_init(void)
+{
+	unsigned int __maybe_unused cpu = smp_processor_id();
+	char str[256];
+
+	printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
+
+	/*
+	 * Only master CPU needs to execute rest of function:
+	 *  - Assume SMP so all cores will have same cache config so
+	 *    any geomtry checks will be same for all
+	 *  - IOC setup / dma callbacks only need to be setup once
+	 */
+	if (!cpu)
+		arc_cache_init_master();
+}

arch/arc/mm/init.c

@@ -40,6 +40,11 @@ struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
 #endif
 
+long __init arc_get_mem_sz(void)
+{
+	return low_mem_sz;
+}
+
 /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
 static int __init setup_mem_sz(char *str)
 {

arch/arm/Kconfig

@@ -1502,8 +1502,7 @@ source kernel/Kconfig.preempt
 
 config HZ_FIXED
 	int
-	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
+	default 200 if ARCH_EBSA110
-		ARCH_S5PV210 || ARCH_EXYNOS4
 	default 128 if SOC_AT91RM9200
 	default 0
 

arch/arm/boot/dts/Makefile

@@ -501,6 +501,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	am3517-evm.dtb \
 	am3517_mt_ventoux.dtb \
 	logicpd-torpedo-37xx-devkit.dtb \
+	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
 	omap3-beagle-xm.dtb \
@@ -845,6 +846,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a83t-allwinner-h8homlet-v2.dtb \
 	sun8i-a83t-cubietruck-plus.dtb \
 	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-nanopi-m1.dtb	\
 	sun8i-h3-nanopi-neo.dtb \
 	sun8i-h3-orangepi-2.dtb \
 	sun8i-h3-orangepi-lite.dtb \

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -6,8 +6,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <dt-bindings/mfd/tps65217.h>
-
 / {
 	cpus {
 		cpu@0 {
@@ -319,13 +317,13 @@
 	ti,pmic-shutdown-controller;
 
 	charger {
-		interrupts = <TPS65217_IRQ_AC>, <TPS65217_IRQ_USB>;
+		interrupts = <0>, <1>;
-		interrupts-names = "AC", "USB";
+		interrupt-names = "USB", "AC";
 		status = "okay";
 	};
 
 	pwrbutton {
-		interrupts = <TPS65217_IRQ_PB>;
+		interrupts = <2>;
 		status = "okay";
 	};
 

arch/arm/boot/dts/am335x-icev2.dts

@@ -170,7 +170,6 @@
 			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
 			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
 			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
-			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */
 		>;
 	};
 

arch/arm/boot/dts/am33xx.dtsi

@@ -16,6 +16,7 @@
 	interrupt-parent = <&intc>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c0;

arch/arm/boot/dts/am4372.dtsi

@@ -16,6 +16,7 @@
 	interrupt-parent = <&wakeupgen>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	chosen { };
 
 	memory@0 {
 		device_type = "memory";

arch/arm/boot/dts/am571x-idk.dts

@@ -62,11 +62,6 @@
 			linux,default-trigger = "mmc0";
 		};
 	};
-
-	extcon_usb2: extcon_usb2 {
-	     compatible = "linux,extcon-usb-gpio";
-	     id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
-	};
 };
 
 &mmc1 {
@@ -79,3 +74,8 @@
 &omap_dwc3_2 {
 	extcon = <&extcon_usb2>;
 };
+
+&extcon_usb2 {
+	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+};

arch/arm/boot/dts/am572x-idk.dts

@@ -23,11 +23,6 @@
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	extcon_usb2: extcon_usb2 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-	};
-
 	status-leds {
 		compatible = "gpio-leds";
 		cpu0-led {
@@ -76,6 +71,11 @@
 	extcon = <&extcon_usb2>;
 };
 
+&extcon_usb2 {
+	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+};
+
 &mmc1 {
 	status = "okay";
 	vmmc-supply = <&v3_3d>;
@@ -87,3 +87,7 @@
 &sn65hvs882 {
 	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 };
+
+&pcie1 {
+	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};

arch/arm/boot/dts/am57xx-idk-common.dtsi

@@ -303,6 +303,13 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
+
+		extcon_usb2: tps659038_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			/* ID & VBUS GPIOs provided in board dts */
+		};
 	};
 };
 
@@ -369,7 +376,7 @@
 };
 
 &usb2 {
-	dr_mode = "otg";
+	dr_mode = "peripheral";
 };
 
 &mmc2 {

arch/arm/boot/dts/bcm-nsp.dtsi

@@ -160,7 +160,7 @@
 
 	axi {
 		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x0011c40a>;
+		ranges = <0x00000000 0x18000000 0x0011c40c>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 

arch/arm/boot/dts/da850-evm.dts

@@ -99,6 +99,7 @@
 				#size-cells = <1>;
 				compatible = "m25p64";
 				spi-max-frequency = <30000000>;
+				m25p,fast-read;
 				reg = <0>;
 				partition@0 {
 					label = "U-Boot-SPL";

arch/arm/boot/dts/dm814x.dtsi

@@ -12,6 +12,7 @@
 	interrupt-parent = <&intc>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;

arch/arm/boot/dts/dm816x.dtsi

@@ -12,6 +12,7 @@
 	interrupt-parent = <&intc>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;

arch/arm/boot/dts/dra7.dtsi

@@ -18,6 +18,7 @@
 
 	compatible = "ti,dra7xx";
 	interrupt-parent = <&crossbar_mpu>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;
@@ -1377,6 +1378,7 @@
 			phy-names = "sata-phy";
 			clocks = <&sata_ref_clk>;
 			ti,hwmods = "sata";
+			ports-implemented = <0x1>;
 		};
 
 		rtc: rtc@48838000 {

arch/arm/boot/dts/dra72-evm-revc.dts

@@ -75,6 +75,6 @@
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,min-output-imepdance;
+		ti,min-output-impedance;
 	};
 };

arch/arm/boot/dts/dra72-evm-tps65917.dtsi

@@ -132,3 +132,19 @@
 		ti,palmas-long-press-seconds = <6>;
 	};
 };
+
+&usb2_phy1 {
+	phy-supply = <&ldo4_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldo4_reg>;
+};
+
+&dss {
+	vdda_video-supply = <&ldo5_reg>;
+};
+
+&mmc1 {
+	vmmc_aux-supply = <&ldo1_reg>;
+};

arch/arm/boot/dts/imx31.dtsi

@@ -31,11 +31,11 @@
 		};
 	};
 
-	avic: avic-interrupt-controller@60000000 {
+	avic: interrupt-controller@68000000 {
 		compatible = "fsl,imx31-avic", "fsl,avic";
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		reg = <0x60000000 0x100000>;
+		reg = <0x68000000 0x100000>;
 	};
 
 	soc {

arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi

@@ -319,8 +319,6 @@
 		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
 		model = "imx6q-nitrogen6_max-sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
 		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
@@ -402,6 +400,8 @@
 
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
 		reg = <0x0a>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;

arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi

@@ -250,8 +250,6 @@
 		compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
 		model = "imx6q-nitrogen6_som2-sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sgtl5000>;
 		ssi-controller = <&ssi1>;
 		audio-codec = <&codec>;
 		audio-routing =
@@ -320,6 +318,8 @@
 
 	codec: sgtl5000@0a {
 		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
 		reg = <0x0a>;
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;

arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi

@@ -533,7 +533,6 @@
 				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
 				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
 				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
 			>;
 		};
 

arch/arm/boot/dts/imx6qdl.dtsi

@@ -1100,6 +1100,7 @@
 				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
 				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
 			};
 
 			ocotp: ocotp@021bc000 {

arch/arm/boot/dts/imx6sl.dtsi

@@ -900,6 +900,7 @@
 				reg = <0x021b8000 0x4000>;
 				interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
 			};
 
 			ocotp: ocotp@021bc000 {

arch/arm/boot/dts/imx6sx.dtsi

@@ -977,6 +977,7 @@
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
 				fsl,weim-cs-gpr = <&gpr>;
+				status = "disabled";
 			};
 
 			ocotp: ocotp@021bc000 {

arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts

@@ -158,7 +158,7 @@
 &mmc1 {
 	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+	pinctrl-0 = <&mmc1_pins>;
 	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;		/* gpio_126 */
 	cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>;		/* gpio_110 */
 	vmmc-supply = <&vmmc1>;
@@ -193,7 +193,8 @@
 			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
 			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
 			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_strobe.gpio_126 sdmmc1_wp*/
+			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_strobe.gpio_126 */
+			OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d11.gpio_110 */
 		>;
 	};
 
@@ -242,12 +243,6 @@
 			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* sys_boot6.gpio_8 */
 		>;
 	};
-
-	mmc1_cd: pinmux_mmc1_cd {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d11.gpio_110 */
-		>;
-	};
 };
 
 

arch/arm/boot/dts/omap2.dtsi

@@ -17,6 +17,7 @@
 	interrupt-parent = <&intc>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		serial0 = &uart1;

arch/arm/boot/dts/omap3-n900.dts

@@ -734,6 +734,8 @@
 	vmmc_aux-supply = <&vsim>;
 	bus-width = <8>;
 	non-removable;
+	no-sdio;
+	no-sd;
 };
 
 &mmc3 {

arch/arm/boot/dts/omap3.dtsi

@@ -17,6 +17,7 @@
 	interrupt-parent = <&intc>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;

arch/arm/boot/dts/omap4.dtsi

@@ -15,6 +15,7 @@
 	interrupt-parent = <&wakeupgen>;
 	#address-cells = <1>;
 	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;

arch/arm/boot/dts/omap5.dtsi

@@ -17,6 +17,7 @@
 
 	compatible = "ti,omap5";
 	interrupt-parent = <&wakeupgen>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;
@@ -987,6 +988,7 @@
 			phy-names = "sata-phy";
 			clocks = <&sata_ref_clk>;
 			ti,hwmods = "sata";
+			ports-implemented = <0x1>;
 		};
 
 		dss: dss@58000000 {

arch/arm/boot/dts/qcom-apq8064.dtsi

@@ -4,6 +4,7 @@
 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
 #include <dt-bindings/reset/qcom,gcc-msm8960.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -303,6 +304,9 @@
 	firmware {
 		scm {
 			compatible = "qcom,scm-apq8064";
+
+			clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
+			clock-names = "core";
 		};
 	};
 

arch/arm/boot/dts/qcom-mdm9615.dtsi

@@ -357,7 +357,7 @@
 		};
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;

arch/arm/boot/dts/sun6i-a31-hummingbird.dts

@@ -140,6 +140,10 @@
 	cpu-supply = <&reg_dcdc3>;
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -234,6 +234,7 @@
 	de: display-engine {
 		compatible = "allwinner,sun6i-a31-display-engine";
 		allwinner,pipelines = <&fe0>;
+		status = "disabled";
 	};
 
 	soc@01c00000 {

arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts

@@ -56,7 +56,7 @@
 };
 
 &pio {
-	mmc2_pins_nrst: mmc2@0 {
+	mmc2_pins_nrst: mmc2-rst-pin {
 		allwinner,pins = "PC16";
 		allwinner,function = "gpio_out";
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts

@@ -81,7 +81,7 @@
 		#address-cells = <0>;
 		interrupt-controller;
 		reg = <0 0x2c001000 0 0x1000>,
-		      <0 0x2c002000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
 		      <0 0x2c004000 0 0x2000>,
 		      <0 0x2c006000 0 0x2000>;
 		interrupts = <1 9 0xf04>;

arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts

@@ -131,7 +131,7 @@
 		#address-cells = <0>;
 		interrupt-controller;
 		reg = <0 0x2c001000 0 0x1000>,
-		      <0 0x2c002000 0 0x1000>,
+		      <0 0x2c002000 0 0x2000>,
 		      <0 0x2c004000 0 0x2000>,
 		      <0 0x2c006000 0 0x2000>;
 		interrupts = <1 9 0xf04>;

arch/arm/boot/dts/vf610-zii-dev-rev-b.dts

@@ -153,7 +153,8 @@
 					switch0phy1: switch1phy0@1 {
 						reg = <1>;
 						interrupt-parent = <&switch0>;
-						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;					};
+						interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+					};
 					switch0phy2: switch1phy0@2 {
 						reg = <2>;
 						interrupt-parent = <&switch0>;

arch/arm/configs/multi_v7_defconfig

@@ -471,7 +471,7 @@ CONFIG_MESON_WATCHDOG=y
 CONFIG_DW_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
-CONFIG_BCM47XX_WATCHDOG=y
+CONFIG_BCM47XX_WDT=y
 CONFIG_BCM7038_WDT=m
 CONFIG_BCM_KONA_WDT=y
 CONFIG_MFD_ACT8945A=y
@@ -893,7 +893,7 @@ CONFIG_BCM2835_MBOX=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
 CONFIG_EFI_VARS=m
 CONFIG_EFI_CAPSULE_LOADER=m
-CONFIG_CONFIG_BCM47XX_NVRAM=y
+CONFIG_BCM47XX_NVRAM=y
 CONFIG_BCM47XX_SPROM=y
 CONFIG_EXT4_FS=y
 CONFIG_AUTOFS4_FS=y

arch/arm/configs/s3c2410_defconfig

@@ -86,9 +86,9 @@ CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_DCCP=y
-CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_SCTP=y
-CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CT_PROTO_UDPLITE=y
 CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
 CONFIG_NF_CONNTRACK_H323=m

arch/arm/include/asm/cputype.h

@@ -94,6 +94,9 @@
 #define ARM_CPU_XSCALE_ARCH_V2		0x4000
 #define ARM_CPU_XSCALE_ARCH_V3		0x6000
 
+/* Qualcomm implemented cores */
+#define ARM_CPU_PART_SCORPION		0x510002d0
+
 extern unsigned int processor_id;
 
 #ifdef CONFIG_CPU_CP15

arch/arm/include/asm/ftrace.h

@@ -54,6 +54,24 @@ static inline void *return_address(unsigned int level)
 
 #define ftrace_return_address(n) return_address(n)
 
+#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
+
+static inline bool arch_syscall_match_sym_name(const char *sym,
+					       const char *name)
+{
+	if (!strcmp(sym, "sys_mmap2"))
+		sym = "sys_mmap_pgoff";
+	else if (!strcmp(sym, "sys_statfs64_wrapper"))
+		sym = "sys_statfs64";
+	else if (!strcmp(sym, "sys_fstatfs64_wrapper"))
+		sym = "sys_fstatfs64";
+	else if (!strcmp(sym, "sys_arm_fadvise64_64"))
+		sym = "sys_fadvise64_64";
+
+	/* Ignore case since sym may start with "SyS" instead of "sys" */
+	return !strcasecmp(sym, name);
+}
+
 #endif /* ifndef __ASSEMBLY__ */
 
 #endif /* _ASM_ARM_FTRACE */

arch/arm/include/asm/virt.h

@@ -80,6 +80,11 @@ static inline bool is_kernel_in_hyp_mode(void)
 	return false;
 }
 
+static inline bool has_vhe(void)
+{
+	return false;
+}
+
 /* The section containing the hypervisor idmap text */
 extern char __hyp_idmap_text_start[];
 extern char __hyp_idmap_text_end[];

arch/arm/include/uapi/asm/types.h

@@ -1,5 +1,5 @@
-#ifndef _ASM_TYPES_H
+#ifndef _UAPI_ASM_TYPES_H
-#define _ASM_TYPES_H
+#define _UAPI_ASM_TYPES_H
 
 #include <asm-generic/int-ll64.h>
 
@@ -37,4 +37,4 @@
 #define __UINTPTR_TYPE__	unsigned long
 #endif
 
-#endif /* _ASM_TYPES_H */
+#endif /* _UAPI_ASM_TYPES_H */

arch/arm/kernel/hw_breakpoint.c

@@ -1063,6 +1063,22 @@ static int __init arch_hw_breakpoint_init(void)
 		return 0;
 	}
 
+	/*
+	 * Scorpion CPUs (at least those in APQ8060) seem to set DBGPRSR.SPD
+	 * whenever a WFI is issued, even if the core is not powered down, in
+	 * violation of the architecture.  When DBGPRSR.SPD is set, accesses to
+	 * breakpoint and watchpoint registers are treated as undefined, so
+	 * this results in boot time and runtime failures when these are
+	 * accessed and we unexpectedly take a trap.
+	 *
+	 * It's not clear if/how this can be worked around, so we blacklist
+	 * Scorpion CPUs to avoid these issues.
+	*/
+	if (read_cpuid_part() == ARM_CPU_PART_SCORPION) {
+		pr_info("Scorpion CPU detected. Hardware breakpoints and watchpoints disabled\n");
+		return 0;
+	}
+
 	has_ossr = core_has_os_save_restore();
 
 	/* Determine how many BRPs/WRPs are available. */

arch/arm/kernel/smp_tlb.c

@@ -9,6 +9,7 @@
  */
 #include <linux/preempt.h>
 #include <linux/smp.h>
+#include <linux/uaccess.h>
 
 #include <asm/smp_plat.h>
 #include <asm/tlbflush.h>
@@ -40,8 +41,11 @@ static inline void ipi_flush_tlb_mm(void *arg)
 static inline void ipi_flush_tlb_page(void *arg)
 {
 	struct tlb_args *ta = (struct tlb_args *)arg;
+	unsigned int __ua_flags = uaccess_save_and_enable();
 
 	local_flush_tlb_page(ta->ta_vma, ta->ta_start);
+
+	uaccess_restore(__ua_flags);
 }
 
 static inline void ipi_flush_tlb_kernel_page(void *arg)
@@ -54,8 +58,11 @@ static inline void ipi_flush_tlb_kernel_page(void *arg)
 static inline void ipi_flush_tlb_range(void *arg)
 {
 	struct tlb_args *ta = (struct tlb_args *)arg;
+	unsigned int __ua_flags = uaccess_save_and_enable();
 
 	local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
+
+	uaccess_restore(__ua_flags);
 }
 
 static inline void ipi_flush_tlb_kernel_range(void *arg)

arch/arm/kvm/arm.c

@@ -1099,6 +1099,9 @@ static void cpu_init_hyp_mode(void *dummy)
 	__cpu_init_hyp_mode(pgd_ptr, hyp_stack_ptr, vector_ptr);
 	__cpu_init_stage2();
 
+	if (is_kernel_in_hyp_mode())
+		kvm_timer_init_vhe();
+
 	kvm_arm_init_debug();
 }
 

arch/arm/mach-davinci/clock.c

@@ -31,10 +31,10 @@ static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
 static DEFINE_SPINLOCK(clockfw_lock);
 
-static void __clk_enable(struct clk *clk)
+void davinci_clk_enable(struct clk *clk)
 {
 	if (clk->parent)
-		__clk_enable(clk->parent);
+		davinci_clk_enable(clk->parent);
 	if (clk->usecount++ == 0) {
 		if (clk->flags & CLK_PSC)
 			davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
@@ -44,7 +44,7 @@ static void __clk_enable(struct clk *clk)
 	}
 }
 
-static void __clk_disable(struct clk *clk)
+void davinci_clk_disable(struct clk *clk)
 {
 	if (WARN_ON(clk->usecount == 0))
 		return;
@@ -56,7 +56,7 @@ static void __clk_disable(struct clk *clk)
 			clk->clk_disable(clk);
 	}
 	if (clk->parent)
-		__clk_disable(clk->parent);
+		davinci_clk_disable(clk->parent);
 }
 
 int davinci_clk_reset(struct clk *clk, bool reset)
@@ -103,7 +103,7 @@ int clk_enable(struct clk *clk)
 		return -EINVAL;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	__clk_enable(clk);
+	davinci_clk_enable(clk);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 
 	return 0;
@@ -118,7 +118,7 @@ void clk_disable(struct clk *clk)
 		return;
 
 	spin_lock_irqsave(&clockfw_lock, flags);
-	__clk_disable(clk);
+	davinci_clk_disable(clk);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);

arch/arm/mach-davinci/clock.h

@@ -132,6 +132,8 @@ int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate);
 int davinci_set_refclk_rate(unsigned long rate);
 int davinci_simple_set_rate(struct clk *clk, unsigned long rate);
 int davinci_clk_reset(struct clk *clk, bool reset);
+void davinci_clk_enable(struct clk *clk);
+void davinci_clk_disable(struct clk *clk);
 
 extern struct platform_device davinci_wdt_device;
 extern void davinci_watchdog_reset(struct platform_device *);

arch/arm/mach-davinci/da850.c

@@ -319,6 +319,16 @@ static struct clk emac_clk = {
 	.gpsc		= 1,
 };
 
+/*
+ * In order to avoid adding the emac_clk to the clock lookup table twice (and
+ * screwing up the linked list in the process) create a separate clock for
+ * mdio inheriting the rate from emac_clk.
+ */
+static struct clk mdio_clk = {
+	.name		= "mdio",
+	.parent		= &emac_clk,
+};
+
 static struct clk mcasp_clk = {
 	.name		= "mcasp",
 	.parent		= &async3_clk,
@@ -367,6 +377,16 @@ static struct clk aemif_clk = {
 	.flags		= ALWAYS_ENABLED,
 };
 
+/*
+ * In order to avoid adding the aemif_clk to the clock lookup table twice (and
+ * screwing up the linked list in the process) create a separate clock for
+ * nand inheriting the rate from aemif_clk.
+ */
+static struct clk aemif_nand_clk = {
+	.name		= "nand",
+	.parent		= &aemif_clk,
+};
+
 static struct clk usb11_clk = {
 	.name		= "usb11",
 	.parent		= &pll0_sysclk4,
@@ -529,7 +549,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"arm",		&arm_clk),
 	CLK(NULL,		"rmii",		&rmii_clk),
 	CLK("davinci_emac.1",	NULL,		&emac_clk),
-	CLK("davinci_mdio.0",	"fck",		&emac_clk),
+	CLK("davinci_mdio.0",	"fck",		&mdio_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp_clk),
 	CLK("davinci-mcbsp.0",	NULL,		&mcbsp0_clk),
 	CLK("davinci-mcbsp.1",	NULL,		&mcbsp1_clk),
@@ -537,7 +557,15 @@ static struct clk_lookup da850_clks[] = {
 	CLK("da830-mmc.0",	NULL,		&mmcsd0_clk),
 	CLK("da830-mmc.1",	NULL,		&mmcsd1_clk),
 	CLK("ti-aemif",		NULL,		&aemif_clk),
-	CLK(NULL,		"aemif",	&aemif_clk),
+	/*
+	 * The only user of this clock is davinci_nand and it get's it through
+	 * con_id. The nand node itself is created from within the aemif
+	 * driver to guarantee that it's probed after the aemif timing
+	 * parameters are configured. of_dev_auxdata is not accessible from
+	 * the aemif driver and can't be passed to of_platform_populate(). For
+	 * that reason we're leaving the dev_id here as NULL.
+	 */
+	CLK(NULL,		"aemif",	&aemif_nand_clk),
 	CLK("ohci-da8xx",	"usb11",	&usb11_clk),
 	CLK("musb-da8xx",	"usb20",	&usb20_clk),
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),

arch/arm/mach-davinci/usb-da8xx.c

@@ -22,6 +22,8 @@
 #define DA8XX_USB0_BASE		0x01e00000
 #define DA8XX_USB1_BASE		0x01e25000
 
+static struct clk *usb20_clk;
+
 static struct platform_device da8xx_usb_phy = {
 	.name		= "da8xx-usb-phy",
 	.id		= -1,
@@ -158,26 +160,13 @@ int __init da8xx_register_usb_refclkin(int rate)
 
 static void usb20_phy_clk_enable(struct clk *clk)
 {
-	struct clk *usb20_clk;
-	int err;
 	u32 val;
 	u32 timeout = 500000; /* 500 msec */
 
 	val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
 
-	usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20");
-	if (IS_ERR(usb20_clk)) {
-		pr_err("could not get usb20 clk: %ld\n", PTR_ERR(usb20_clk));
-		return;
-	}
-
 	/* The USB 2.O PLL requires that the USB 2.O PSC is enabled as well. */
-	err = clk_prepare_enable(usb20_clk);
+	davinci_clk_enable(usb20_clk);
-	if (err) {
-		pr_err("failed to enable usb20 clk: %d\n", err);
-		clk_put(usb20_clk);
-		return;
-	}
 
 	/*
 	 * Turn on the USB 2.0 PHY, but just the PLL, and not OTG. The USB 1.1
@@ -197,8 +186,7 @@ static void usb20_phy_clk_enable(struct clk *clk)
 
 	pr_err("Timeout waiting for USB 2.0 PHY clock good\n");
 done:
-	clk_disable_unprepare(usb20_clk);
+	davinci_clk_disable(usb20_clk);
-	clk_put(usb20_clk);
 }
 
 static void usb20_phy_clk_disable(struct clk *clk)
@@ -285,11 +273,19 @@ static struct clk_lookup usb20_phy_clk_lookup =
 int __init da8xx_register_usb20_phy_clk(bool use_usb_refclkin)
 {
 	struct clk *parent;
-	int ret = 0;
+	int ret;
+
+	usb20_clk = clk_get(&da8xx_usb20_dev.dev, "usb20");
+	ret = PTR_ERR_OR_ZERO(usb20_clk);
+	if (ret)
+		return ret;
 
 	parent = clk_get(NULL, use_usb_refclkin ? "usb_refclkin" : "pll0_aux");
-	if (IS_ERR(parent))
+	ret = PTR_ERR_OR_ZERO(parent);
-		return PTR_ERR(parent);
+	if (ret) {
+		clk_put(usb20_clk);
+		return ret;
+	}
 
 	usb20_phy_clk.parent = parent;
 	ret = clk_register(&usb20_phy_clk);

arch/arm/mach-exynos/platsmp.c

@@ -385,36 +385,6 @@ fail:
 	return pen_release != -1 ? ret : 0;
 }
 
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-
-static void __init exynos_smp_init_cpus(void)
-{
-	void __iomem *scu_base = scu_base_addr();
-	unsigned int i, ncores;
-
-	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
-		ncores = scu_base ? scu_get_core_count(scu_base) : 1;
-	else
-		/*
-		 * CPU Nodes are passed thru DT and set_cpu_possible
-		 * is set by "arm_dt_init_cpu_maps".
-		 */
-		return;
-
-	/* sanity check */
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
 static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
 {
 	int i;
@@ -479,7 +449,6 @@ static void exynos_cpu_die(unsigned int cpu)
 #endif /* CONFIG_HOTPLUG_CPU */
 
 const struct smp_operations exynos_smp_ops __initconst = {
-	.smp_init_cpus		= exynos_smp_init_cpus,
 	.smp_prepare_cpus	= exynos_smp_prepare_cpus,
 	.smp_secondary_init	= exynos_secondary_init,
 	.smp_boot_secondary	= exynos_boot_secondary,

arch/arm/mach-imx/mach-imx1.c

@@ -37,7 +37,6 @@ static const char * const imx1_dt_board_compat[] __initconst = {
 };
 
 DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)")
-	.map_io		= debug_ll_io_init,
 	.init_early	= imx1_init_early,
 	.init_irq	= imx1_init_irq,
 	.dt_compat	= imx1_dt_board_compat,

arch/arm/mach-omap1/dma.c

@@ -32,7 +32,6 @@
 #include "soc.h"
 
 #define OMAP1_DMA_BASE			(0xfffed800)
-#define OMAP1_LOGICAL_DMA_CH_COUNT	17
 
 static u32 enable_1510_mode;
 
@@ -348,8 +347,6 @@ static int __init omap1_system_dma_init(void)
 		goto exit_iounmap;
 	}
 
-	d->lch_count		= OMAP1_LOGICAL_DMA_CH_COUNT;
-
 	/* Valid attributes for omap1 plus processors */
 	if (cpu_is_omap15xx())
 		d->dev_caps = ENABLE_1510_MODE;
@@ -366,13 +363,14 @@ static int __init omap1_system_dma_init(void)
 	d->dev_caps		|= CLEAR_CSR_ON_READ;
 	d->dev_caps		|= IS_WORD_16;
 
-	if (cpu_is_omap15xx())
+	/* available logical channels */
-		d->chan_count = 9;
+	if (cpu_is_omap15xx()) {
-	else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
+		d->lch_count = 9;
-		if (!(d->dev_caps & ENABLE_1510_MODE))
+	} else {
-			d->chan_count = 16;
+		if (d->dev_caps & ENABLE_1510_MODE)
+			d->lch_count = 9;
 		else
-			d->chan_count = 9;
+			d->lch_count = 16;
 	}
 
 	p = dma_plat_info;

arch/arm/mach-omap2/Makefile

@@ -7,7 +7,7 @@ ccflags-y := -I$(srctree)/$(src)/include \
 
 # Common support
 obj-y := id.o io.o control.o devices.o fb.o timer.o pm.o \
-	 common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
+	 common.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
 	 omap_device.o omap-headsmp.o sram.o drm.o
 
 hwmod-common				= omap_hwmod.o omap_hwmod_reset.o \

arch/arm/mach-omap2/board-generic.c

@@ -304,7 +304,7 @@ DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)")
 	.init_late	= am43xx_init_late,
 	.init_irq	= omap_gic_of_init,
 	.init_machine	= omap_generic_init,
-	.init_time	= omap4_local_timer_init,
+	.init_time	= omap3_gptimer_timer_init,
 	.dt_compat	= am43_boards_compat,
 	.restart	= omap44xx_restart,
 MACHINE_END

arch/arm/mach-omap2/gpio.c

@@ -1,160 +0,0 @@
-/*
- * OMAP2+ specific gpio initialization
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Author:
- *	Charulatha V <charu@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/gpio.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/of.h>
-#include <linux/platform_data/gpio-omap.h>
-
-#include "soc.h"
-#include "omap_hwmod.h"
-#include "omap_device.h"
-#include "omap-pm.h"
-
-#include "powerdomain.h"
-
-static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
-{
-	struct platform_device *pdev;
-	struct omap_gpio_platform_data *pdata;
-	struct omap_gpio_dev_attr *dev_attr;
-	char *name = "omap_gpio";
-	int id;
-	struct powerdomain *pwrdm;
-
-	/*
-	 * extract the device id from name field available in the
-	 * hwmod database and use the same for constructing ids for
-	 * gpio devices.
-	 * CAUTION: Make sure the name in the hwmod database does
-	 * not change. If changed, make corresponding change here
-	 * or make use of static variable mechanism to handle this.
-	 */
-	sscanf(oh->name, "gpio%d", &id);
-
-	pdata = kzalloc(sizeof(struct omap_gpio_platform_data), GFP_KERNEL);
-	if (!pdata) {
-		pr_err("gpio%d: Memory allocation failed\n", id);
-		return -ENOMEM;
-	}
-
-	dev_attr = (struct omap_gpio_dev_attr *)oh->dev_attr;
-	pdata->bank_width = dev_attr->bank_width;
-	pdata->dbck_flag = dev_attr->dbck_flag;
-	pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count;
-	pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL);
-	if (!pdata->regs) {
-		pr_err("gpio%d: Memory allocation failed\n", id);
-		kfree(pdata);
-		return -ENOMEM;
-	}
-
-	switch (oh->class->rev) {
-	case 0:
-		if (id == 1)
-			/* non-wakeup GPIO pins for OMAP2 Bank1 */
-			pdata->non_wakeup_gpios = 0xe203ffc0;
-		else if (id == 2)
-			/* non-wakeup GPIO pins for OMAP2 Bank2 */
-			pdata->non_wakeup_gpios = 0x08700040;
-		/* fall through */
-
-	case 1:
-		pdata->regs->revision = OMAP24XX_GPIO_REVISION;
-		pdata->regs->direction = OMAP24XX_GPIO_OE;
-		pdata->regs->datain = OMAP24XX_GPIO_DATAIN;
-		pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT;
-		pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT;
-		pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT;
-		pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1;
-		pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2;
-		pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1;
-		pdata->regs->irqenable2 = OMAP24XX_GPIO_IRQENABLE2;
-		pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1;
-		pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1;
-		pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL;
-		pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN;
-		pdata->regs->ctrl = OMAP24XX_GPIO_CTRL;
-		pdata->regs->wkup_en = OMAP24XX_GPIO_WAKE_EN;
-		pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0;
-		pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1;
-		pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT;
-		pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT;
-		break;
-	case 2:
-		pdata->regs->revision = OMAP4_GPIO_REVISION;
-		pdata->regs->direction = OMAP4_GPIO_OE;
-		pdata->regs->datain = OMAP4_GPIO_DATAIN;
-		pdata->regs->dataout = OMAP4_GPIO_DATAOUT;
-		pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT;
-		pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT;
-		pdata->regs->irqstatus_raw0 = OMAP4_GPIO_IRQSTATUSRAW0;
-		pdata->regs->irqstatus_raw1 = OMAP4_GPIO_IRQSTATUSRAW1;
-		pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0;
-		pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1;
-		pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0;
-		pdata->regs->irqenable2 = OMAP4_GPIO_IRQSTATUSSET1;
-		pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0;
-		pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0;
-		pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME;
-		pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE;
-		pdata->regs->ctrl = OMAP4_GPIO_CTRL;
-		pdata->regs->wkup_en = OMAP4_GPIO_IRQWAKEN0;
-		pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0;
-		pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1;
-		pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT;
-		pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT;
-		break;
-	default:
-		WARN(1, "Invalid gpio bank_type\n");
-		kfree(pdata->regs);
-		kfree(pdata);
-		return -EINVAL;
-	}
-
-	pwrdm = omap_hwmod_get_pwrdm(oh);
-	pdata->loses_context = pwrdm_can_ever_lose_context(pwrdm);
-
-	pdev = omap_device_build(name, id - 1, oh, pdata, sizeof(*pdata));
-	kfree(pdata);
-
-	if (IS_ERR(pdev)) {
-		WARN(1, "Can't build omap_device for %s:%s.\n",
-					name, oh->name);
-		return PTR_ERR(pdev);
-	}
-
-	return 0;
-}
-
-/*
- * gpio_init needs to be done before
- * machine_init functions access gpio APIs.
- * Hence gpio_init is a omap_postcore_initcall.
- */
-static int __init omap2_gpio_init(void)
-{
-	/* If dtb is there, the devices will be created dynamically */
-	if (of_have_populated_dt())
-		return -ENODEV;
-
-	return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init, NULL);
-}
-omap_postcore_initcall(omap2_gpio_init);

arch/arm/mach-omap2/omap_hwmod.c

@@ -741,14 +741,14 @@ static int _init_main_clk(struct omap_hwmod *oh)
 	int ret = 0;
 	char name[MOD_CLK_MAX_NAME_LEN];
 	struct clk *clk;
+	static const char modck[] = "_mod_ck";
 
-	/* +7 magic comes from '_mod_ck' suffix */
+	if (strlen(oh->name) >= MOD_CLK_MAX_NAME_LEN - strlen(modck))
-	if (strlen(oh->name) + 7 > MOD_CLK_MAX_NAME_LEN)
 		pr_warn("%s: warning: cropping name for %s\n", __func__,
 			oh->name);
 
-	strncpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - 7);
+	strlcpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - strlen(modck));
-	strcat(name, "_mod_ck");
+	strlcat(name, modck, MOD_CLK_MAX_NAME_LEN);
 
 	clk = clk_get(NULL, name);
 	if (!IS_ERR(clk)) {

arch/arm/mach-omap2/omap_hwmod_common_data.h

@@ -121,10 +121,6 @@ extern struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[];
 extern struct omap_hwmod_irq_info omap2_dispc_irqs[];
 extern struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[];
 extern struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio1_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio2_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio3_irqs[];
-extern struct omap_hwmod_irq_info omap2_gpio4_irqs[];
 extern struct omap_hwmod_irq_info omap2_dma_system_irqs[];
 extern struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[];
 extern struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[];

arch/arm/mach-omap2/pdata-quirks.c

@@ -161,7 +161,7 @@ static struct ti_st_plat_data wilink7_pdata = {
 	.nshutdown_gpio = 162,
 	.dev_name = "/dev/ttyO1",
 	.flow_cntrl = 1,
-	.baud_rate = 300000,
+	.baud_rate = 3000000,
 };
 
 static struct platform_device wl128x_device = {

arch/arm/mach-omap2/prm_common.c

@@ -295,10 +295,8 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup)
 		GFP_KERNEL);
 
 	if (!prcm_irq_chips || !prcm_irq_setup->saved_mask ||
-	    !prcm_irq_setup->priority_mask) {
+	    !prcm_irq_setup->priority_mask)
-		pr_err("PRCM: kzalloc failed\n");
 		goto err;
-	}
 
 	memset(mask, 0, sizeof(mask));
 

arch/arm/mach-omap2/timer.c

@@ -510,18 +510,19 @@ void __init omap3_secure_sync32k_timer_init(void)
 }
 #endif /* CONFIG_ARCH_OMAP3 */
 
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) || \
+	defined(CONFIG_SOC_AM43XX)
 void __init omap3_gptimer_timer_init(void)
 {
 	__omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
 			1, "timer_sys_ck", "ti,timer-alwon", true);
-
+	if (of_have_populated_dt())
-	clocksource_probe();
+		clocksource_probe();
 }
 #endif
 
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) ||		\
-	defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
+	defined(CONFIG_SOC_DRA7XX)
 static void __init omap4_sync32k_timer_init(void)
 {
 	__omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",