From 8e14b530f8c90346eab43c7b59b03ff9fec7d171 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Sun, 31 Oct 2021 23:41:37 +0000 Subject: [PATCH] ARM: dts: exynos: Use interrupt for BCM4330 host wakeup in I9100 Switch away from using the deprecated 'host-wakeup-gpios' property, and use a 'host-wakeup' interrupt instead, as suggested by the binding documentation. Signed-off-by: Paul Cercueil Link: https://lore.kernel.org/r/20211031234137.87070-2-paul@crapouillou.net Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos4210-i9100.dts | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index 21b791150697..33894054b8b0 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -830,7 +830,10 @@ shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>; device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; + + interrupt-parent = <&gpx2>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wakeup"; }; };