fbdev: sh_mipi_dsi: add extra phyctrl for sh_mipi_dsi_info

sh_mipi uses some clocks, but the method of setup depends on CPU.

Current SuperH (like sh73a0) can control all of these clocks
by CPG (Clock Pulse Generator).
It means we can control it by clock framework only.
But on sh7372, it needs CPG settings AND sh_mipi PHYCTRL::PLLDS,
and only sh7372 has PHYCTRL::PLLDS.

But on current sh_mipi driver, PHYCTRL::PLLDS of sh7372 was
overwrote since the callback timing of clock setting was changed
by c2658b70f0
(fbdev: sh_mipi_dsi: fixup setup timing of sh_mipi_setup()).
To solve this issue, this patch adds extra .phyctrl.

This patch adds detail explanation for unclear mipi settings
and fixup wrong PHYCTRL::PLLDS value for ap4evb (0xb -> 0x6).

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>

arch/arm/mach-shmobile/board-ap4evb.c

@@ -486,20 +486,25 @@ static struct platform_device keysc_device = {
 };
 
 /* MIPI-DSI */
-#define PHYCTRL		0x0070
 static int sh_mipi_set_dot_clock(struct platform_device *pdev,
 				 void __iomem *base,
 				 int enable)
 {
 	struct clk *pck = clk_get(&pdev->dev, "dsip_clk");
-	void __iomem *phy =  base + PHYCTRL;
 
 	if (IS_ERR(pck))
 		return PTR_ERR(pck);
 
 	if (enable) {
+		/*
+		 * DSIPCLK	= 24MHz
+		 * D-PHY	= DSIPCLK * ((0x6*2)+1) = 312MHz (see .phyctrl)
+		 * HsByteCLK	= D-PHY/8 = 39MHz
+		 *
+		 *  X * Y * FPS =
+		 * (544+72+600+16) * (961+8+8+2) * 30 = 36.1MHz
+		 */
 		clk_set_rate(pck, clk_round_rate(pck, 24000000));
-		iowrite32(ioread32(phy) | (0xb << 8), phy);
 		clk_enable(pck);
 	} else {
 		clk_disable(pck);
@@ -530,6 +535,7 @@ static struct sh_mipi_dsi_info mipidsi0_info = {
 	.lcd_chan	= &lcdc_info.ch[0],
 	.lane		= 2,
 	.vsynw_offset	= 17,
+	.phyctrl	= 0x6 << 8,
 	.flags		= SH_MIPI_DSI_SYNC_PULSES_MODE |
 			  SH_MIPI_DSI_HSbyteCLK,
 	.set_dot_clock	= sh_mipi_set_dot_clock,

drivers/video/sh_mipi_dsi.c

@@ -273,7 +273,7 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
 	iowrite32(0x00000001, base + PHYCTRL);
 	udelay(200);
 	/* Deassert resets, power on */
-	iowrite32(0x03070001, base + PHYCTRL);
+	iowrite32(0x03070001 | pdata->phyctrl, base + PHYCTRL);
 
 	/*
 	 * Default = ULPS enable |

include/video/sh_mipi_dsi.h

@@ -51,6 +51,7 @@ struct sh_mipi_dsi_info {
 	int				lane;
 	unsigned long			flags;
 	u32				clksrc;
+	u32				phyctrl; /* for extra setting */
 	unsigned int			vsynw_offset;
 	int	(*set_dot_clock)(struct platform_device *pdev,
 				 void __iomem *base,