x86: clean up arch/x86/Kconfig*

- Consistent alignment of help text - Use the ---help--- keyword everywhere consistently as a visual separator - fix whitespace mismatches Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05 16:21:53 +01:00 · 2009-02-05 16:21:53 +01:00 · 8f9ca475c9
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@ -5,7 +5,7 @@ mainmenu "Linux Kernel Configuration for x86"
 config 64BIT
 	bool "64-bit kernel" if ARCH = "x86"
 	default ARCH = "x86_64"
-	help
+	---help---
 	  Say yes to build a 64-bit kernel - formerly known as x86_64
 	  Say no to build a 32-bit kernel - formerly known as i386
@ -235,7 +235,7 @@ config SMP
 config SPARSE_IRQ
 	bool "Support sparse irq numbering"
 	depends on PCI_MSI || HT_IRQ
-	help
+	---help---
 	  This enables support for sparse irqs. This is useful for distro
 	  kernels that want to define a high CONFIG_NR_CPUS value but still
 	  want to have low kernel memory footprint on smaller machines.
@ -249,7 +249,7 @@ config NUMA_MIGRATE_IRQ_DESC
 	bool "Move irq desc when changing irq smp_affinity"
 	depends on SPARSE_IRQ && NUMA
 	default n
-	help
+	---help---
 	  This enables moving irq_desc to cpu/node that irq will use handled.
 	  If you don't know what to do here, say N.
@ -258,19 +258,19 @@ config X86_MPPARSE
 	bool "Enable MPS table" if ACPI
 	default y
 	depends on X86_LOCAL_APIC
-	help
+	---help---
 	  For old smp systems that do not have proper acpi support. Newer systems
 	  (esp with 64bit cpus) with acpi support, MADT and DSDT will override it
 config X86_BIGSMP
 	bool "Support for big SMP systems with more than 8 CPUs"
 	depends on X86_32 && SMP
-	help
+	---help---
 	  This option is needed for the systems that have more than 8 CPUs
 config X86_NON_STANDARD
 	bool "Support for non-standard x86 platforms"
-	help
+	---help---
 	  If you disable this option then the kernel will only support
 	  standard PC platforms. (which covers the vast majority of
 	  systems out there.)
@ -285,7 +285,7 @@ config X86_VISWS
 	bool "SGI 320/540 (Visual Workstation)"
 	depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
 	depends on X86_NON_STANDARD
-	help
+	---help---
 	  The SGI Visual Workstation series is an IA32-based workstation
 	  based on SGI systems chips with some legacy PC hardware attached.
@ -300,7 +300,7 @@ config X86_RDC321X
 	depends on X86_NON_STANDARD
 	select M486
 	select X86_REBOOTFIXUPS
-	help
+	---help---
 	  This option is needed for RDC R-321x system-on-chip, also known
 	  as R-8610-(G).
 	  If you don't have one of these chips, you should say N here.
@ -309,7 +309,7 @@ config X86_UV
 	bool "SGI Ultraviolet"
 	depends on X86_64
 	depends on X86_NON_STANDARD
-	help
+	---help---
 	  This option is needed in order to support SGI Ultraviolet systems.
 	  If you don't have one of these, you should say N here.
@ -318,7 +318,7 @@ config X86_VSMP
 	select PARAVIRT
 	depends on X86_64 && PCI
 	depends on X86_NON_STANDARD
-	help
+	---help---
 	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
 	  supposed to run on these EM64T-based machines.  Only choose this option
 	  if you have one of these machines.
@ -327,7 +327,7 @@ config X86_ELAN
 	bool "AMD Elan"
 	depends on X86_32
 	depends on X86_NON_STANDARD
-	help
+	---help---
 	  Select this for an AMD Elan processor.
 	  Do not use this option for K6/Athlon/Opteron processors!
@ -338,7 +338,7 @@ config X86_32_NON_STANDARD
 	bool "Support non-standard 32-bit SMP architectures"
 	depends on X86_32 && SMP
 	depends on X86_NON_STANDARD
-	help
+	---help---
 	  This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
 	  subarchitectures.  It is intended for a generic binary kernel.
 	  if you select them all, kernel will probe it one by one. and will
@ -349,7 +349,7 @@ config X86_NUMAQ
 	depends on X86_32_NON_STANDARD
 	select NUMA
 	select X86_MPPARSE
-	help
+	---help---
 	  This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
 	  NUMA multiquad box. This changes the way that processors are
 	  bootstrapped, and uses Clustered Logical APIC addressing mode instead
@ -359,14 +359,14 @@ config X86_NUMAQ
 config X86_SUMMIT
 	bool "Summit/EXA (IBM x440)"
 	depends on X86_32_NON_STANDARD
-	help
+	---help---
 	  This option is needed for IBM systems that use the Summit/EXA chipset.
 	  In particular, it is needed for the x440.
 config X86_ES7000
 	bool "Support for Unisys ES7000 IA32 series"
 	depends on X86_32_NON_STANDARD && X86_BIGSMP
-	help
+	---help---
 	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
 	  supposed to run on an IA32-based Unisys ES7000 system.
@ -374,7 +374,7 @@ config X86_VOYAGER
 	bool "Voyager (NCR)"
 	depends on SMP && !PCI && BROKEN
 	depends on X86_32_NON_STANDARD
-	help
+	---help---
 	  Voyager is an MCA-based 32-way capable SMP architecture proprietary
 	  to NCR Corp.  Machine classes 345x/35xx/4100/51xx are Voyager-based.
@ -387,7 +387,7 @@ config SCHED_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
 	depends on X86
-	help
+	---help---
 	  Calculate simpler /proc/<PID>/wchan values. If this option
 	  is disabled then wchan values will recurse back to the
 	  caller function. This provides more accurate wchan values,
@ -397,7 +397,7 @@ config SCHED_OMIT_FRAME_POINTER
 menuconfig PARAVIRT_GUEST
 	bool "Paravirtualized guest support"
-	help
+	---help---
 	  Say Y here to get to see options related to running Linux under
 	  various hypervisors.  This option alone does not add any kernel code.
@ -411,7 +411,7 @@ config VMI
 	bool "VMI Guest support"
 	select PARAVIRT
 	depends on X86_32
-	help
+	---help---
 	  VMI provides a paravirtualized interface to the VMware ESX server
 	  (it could be used by other hypervisors in theory too, but is not
 	  at the moment), by linking the kernel to a GPL-ed ROM module
@ -421,7 +421,7 @@ config KVM_CLOCK
 	bool "KVM paravirtualized clock"
 	select PARAVIRT
 	select PARAVIRT_CLOCK
-	help
+	---help---
 	  Turning on this option will allow you to run a paravirtualized clock
 	  when running over the KVM hypervisor. Instead of relying on a PIT
 	  (or probably other) emulation by the underlying device model, the host
@ -431,7 +431,7 @@ config KVM_CLOCK
 config KVM_GUEST
 	bool "KVM Guest support"
 	select PARAVIRT
-	help
+	---help---
 	  This option enables various optimizations for running under the KVM
 	  hypervisor.
@ -439,7 +439,7 @@ source "arch/x86/lguest/Kconfig"
 config PARAVIRT
 	bool "Enable paravirtualization code"
-	help
+	---help---
 	  This changes the kernel so it can modify itself when it is run
 	  under a hypervisor, potentially improving performance significantly
 	  over full virtualization.  However, when run without a hypervisor
@ -454,13 +454,13 @@ endif
 config PARAVIRT_DEBUG
 	bool "paravirt-ops debugging"
 	depends on PARAVIRT && DEBUG_KERNEL
-       help
+	---help---
 	  Enable to debug paravirt_ops internals.  Specifically, BUG if
 	  a paravirt_op is missing when it is called.
 config MEMTEST
 	bool "Memtest"
-	help
+	---help---
 	  This option adds a kernel parameter 'memtest', which allows memtest
 	  to be set.
 	        memtest=0, mean disabled; -- default
@ -482,7 +482,7 @@ source "arch/x86/Kconfig.cpu"
 config HPET_TIMER
 	def_bool X86_64
 	prompt "HPET Timer Support" if X86_32
-	help
+	---help---
 	  Use the IA-PC HPET (High Precision Event Timer) to manage
 	  time in preference to the PIT and RTC, if a HPET is
 	  present.
@ -507,7 +507,7 @@ config HPET_EMULATE_RTC
 config DMI
 	default y
 	bool "Enable DMI scanning" if EMBEDDED
-	help
+	---help---
 	  Enabled scanning of DMI to identify machine quirks. Say Y
 	  here unless you have verified that your setup is not
 	  affected by entries in the DMI blacklist. Required by PNP
@ -519,7 +519,7 @@ config GART_IOMMU
 	select SWIOTLB
 	select AGP
 	depends on X86_64 && PCI
-	help
+	---help---
 	  Support for full DMA access of devices with 32bit memory access only
 	  on systems with more than 3GB. This is usually needed for USB,
 	  sound, many IDE/SATA chipsets and some other devices.
@ -534,7 +534,7 @@ config CALGARY_IOMMU
 	bool "IBM Calgary IOMMU support"
 	select SWIOTLB
 	depends on X86_64 && PCI && EXPERIMENTAL
-	help
+	---help---
 	  Support for hardware IOMMUs in IBM's xSeries x366 and x460
 	  systems. Needed to run systems with more than 3GB of memory
 	  properly with 32-bit PCI devices that do not support DAC
@ -552,7 +552,7 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT
 	def_bool y
 	prompt "Should Calgary be enabled by default?"
 	depends on CALGARY_IOMMU
-	help
+	---help---
 	  Should Calgary be enabled by default? if you choose 'y', Calgary
 	  will be used (if it exists). If you choose 'n', Calgary will not be
 	  used even if it exists. If you choose 'n' and would like to use
@ -564,7 +564,7 @@ config AMD_IOMMU
 	select SWIOTLB
 	select PCI_MSI
 	depends on X86_64 && PCI && ACPI
-	help
+	---help---
 	  With this option you can enable support for AMD IOMMU hardware in
 	  your system. An IOMMU is a hardware component which provides
 	  remapping of DMA memory accesses from devices. With an AMD IOMMU you
@ -579,7 +579,7 @@ config AMD_IOMMU_STATS
 	bool "Export AMD IOMMU statistics to debugfs"
 	depends on AMD_IOMMU
 	select DEBUG_FS
-	help
+	---help---
 	  This option enables code in the AMD IOMMU driver to collect various
 	  statistics about whats happening in the driver and exports that
 	  information to userspace via debugfs.
@ -588,7 +588,7 @@ config AMD_IOMMU_STATS
 # need this always selected by IOMMU for the VIA workaround
 config SWIOTLB
 	def_bool y if X86_64
-	help
+	---help---
 	  Support for software bounce buffers used on x86-64 systems
 	  which don't have a hardware IOMMU (e.g. the current generation
 	  of Intel's x86-64 CPUs). Using this PCI devices which can only
@ -606,7 +606,7 @@ config MAXSMP
 	depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL
 	select CPUMASK_OFFSTACK
 	default n
-	help
+	---help---
 	  Configure maximum number of CPUS and NUMA Nodes for this architecture.
 	  If unsure, say N.
@ -617,7 +617,7 @@ config NR_CPUS
 	default "4096" if MAXSMP
 	default "32" if SMP && (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000)
 	default "8" if SMP
-	help
+	---help---
 	  This allows you to specify the maximum number of CPUs which this
 	  kernel will support.  The maximum supported value is 512 and the
 	  minimum value which makes sense is 2.
@ -628,7 +628,7 @@ config NR_CPUS
 config SCHED_SMT
 	bool "SMT (Hyperthreading) scheduler support"
 	depends on X86_HT
-	help
+	---help---
 	  SMT scheduler support improves the CPU scheduler's decision making
 	  when dealing with Intel Pentium 4 chips with HyperThreading at a
 	  cost of slightly increased overhead in some places. If unsure say
@ -638,7 +638,7 @@ config SCHED_MC
 	def_bool y
 	prompt "Multi-core scheduler support"
 	depends on X86_HT
-	help
+	---help---
 	  Multi-core scheduler support improves the CPU scheduler's decision
 	  making when dealing with multi-core CPU chips at a cost of slightly
 	  increased overhead in some places. If unsure say N here.
@ -648,7 +648,7 @@ source "kernel/Kconfig.preempt"
 config X86_UP_APIC
 	bool "Local APIC support on uniprocessors"
 	depends on X86_32 && !SMP && !X86_32_NON_STANDARD
-	help
+	---help---
 	  A local APIC (Advanced Programmable Interrupt Controller) is an
 	  integrated interrupt controller in the CPU. If you have a single-CPU
 	  system which has a processor with a local APIC, you can say Y here to
@ -661,7 +661,7 @@ config X86_UP_APIC
 config X86_UP_IOAPIC
 	bool "IO-APIC support on uniprocessors"
 	depends on X86_UP_APIC
-	help
+	---help---
 	  An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an
 	  SMP-capable replacement for PC-style interrupt controllers. Most
 	  SMP systems and many recent uniprocessor systems have one.
@ -686,7 +686,7 @@ config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 	bool "Reroute for broken boot IRQs"
 	default n
 	depends on X86_IO_APIC
-	help
+	---help---
 	  This option enables a workaround that fixes a source of
 	  spurious interrupts. This is recommended when threaded
 	  interrupt handling is used on systems where the generation of
@ -726,7 +726,7 @@ config X86_MCE_INTEL
 	def_bool y
 	prompt "Intel MCE features"
 	depends on X86_64 && X86_MCE && X86_LOCAL_APIC
-	help
+	---help---
 	   Additional support for intel specific MCE features such as
 	   the thermal monitor.
@ -734,14 +734,14 @@ config X86_MCE_AMD
 	def_bool y
 	prompt "AMD MCE features"
 	depends on X86_64 && X86_MCE && X86_LOCAL_APIC
-	help
+	---help---
 	   Additional support for AMD specific MCE features such as
 	   the DRAM Error Threshold.
 config X86_MCE_NONFATAL
 	tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
 	depends on X86_32 && X86_MCE
-	help
+	---help---
 	  Enabling this feature starts a timer that triggers every 5 seconds which
 	  will look at the machine check registers to see if anything happened.
 	  Non-fatal problems automatically get corrected (but still logged).
@ -754,7 +754,7 @@ config X86_MCE_NONFATAL
 config X86_MCE_P4THERMAL
 	bool "check for P4 thermal throttling interrupt."
 	depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP)
-	help
+	---help---
 	  Enabling this feature will cause a message to be printed when the P4
 	  enters thermal throttling.
@ -762,7 +762,7 @@ config VM86
 	bool "Enable VM86 support" if EMBEDDED
 	default y
 	depends on X86_32
-	help
+	---help---
 	  This option is required by programs like DOSEMU to run 16-bit legacy
 	  code on X86 processors. It also may be needed by software like
 	  XFree86 to initialize some video cards via BIOS. Disabling this
@ -844,7 +844,7 @@ config MICROCODE_INTEL
 	depends on MICROCODE
 	default MICROCODE
 	select FW_LOADER
-       --help---
+	---help---
 	  This options enables microcode patch loading support for Intel
 	  processors.
@ -856,7 +856,7 @@ config MICROCODE_AMD
 	bool "AMD microcode patch loading support"
 	depends on MICROCODE
 	select FW_LOADER
-       --help---
+	---help---
 	  If you select this option, microcode patch loading support for AMD
 	  processors will be enabled.
@ -866,7 +866,7 @@ config MICROCODE_AMD
 config X86_MSR
 	tristate "/dev/cpu/*/msr - Model-specific register support"
-	help
+	---help---
 	  This device gives privileged processes access to the x86
 	  Model-Specific Registers (MSRs).  It is a character device with
 	  major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
@ -875,7 +875,7 @@ config X86_MSR
 config X86_CPUID
 	tristate "/dev/cpu/*/cpuid - CPU information support"
-	help
+	---help---
 	  This device gives processes access to the x86 CPUID instruction to
 	  be executed on a specific processor.  It is a character device
 	  with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
@ -927,7 +927,7 @@ config NOHIGHMEM
 config HIGHMEM4G
 	bool "4GB"
 	depends on !X86_NUMAQ
-	help
+	---help---
 	  Select this if you have a 32-bit processor and between 1 and 4
 	  gigabytes of physical RAM.
@ -935,7 +935,7 @@ config HIGHMEM64G
 	bool "64GB"
 	depends on !M386 && !M486
 	select X86_PAE
-	help
+	---help---
 	  Select this if you have a 32-bit processor and more than 4
 	  gigabytes of physical RAM.
@ -946,7 +946,7 @@ choice
 	prompt "Memory split" if EMBEDDED
 	default VMSPLIT_3G
 	depends on X86_32
-	help
+	---help---
 	  Select the desired split between kernel and user memory.
 	  If the address range available to the kernel is less than the
@ -992,7 +992,7 @@ config HIGHMEM
 config X86_PAE
 	bool "PAE (Physical Address Extension) Support"
 	depends on X86_32 && !HIGHMEM4G
-	help
+	---help---
 	  PAE is required for NX support, and furthermore enables
 	  larger swapspace support for non-overcommit purposes. It
 	  has the cost of more pagetable lookup overhead, and also
@ -1005,7 +1005,7 @@ config DIRECT_GBPAGES
 	bool "Enable 1GB pages for kernel pagetables" if EMBEDDED
 	default y
 	depends on X86_64
-	help
+	---help---
 	  Allow the kernel linear mapping to use 1GB pages on CPUs that
 	  support it. This can improve the kernel's performance a tiny bit by
 	  reducing TLB pressure. If in doubt, say "Y".
@ -1016,7 +1016,7 @@ config NUMA
 	depends on SMP
 	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
 	default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
-	help
+	---help---
 	  Enable NUMA (Non Uniform Memory Access) support.
 	  The kernel will try to allocate memory used by a CPU on the
@ -1039,7 +1039,7 @@ config K8_NUMA
 	def_bool y
 	prompt "Old style AMD Opteron NUMA detection"
 	depends on X86_64 && NUMA && PCI
-	help
+	---help---
 	  Enable K8 NUMA node topology detection.  You should say Y here if
 	  you have a multi processor AMD K8 system. This uses an old
 	  method to read the NUMA configuration directly from the builtin
@ -1051,7 +1051,7 @@ config X86_64_ACPI_NUMA
 	prompt "ACPI NUMA detection"
 	depends on X86_64 && NUMA && ACPI && PCI
 	select ACPI_NUMA
-	help
+	---help---
 	  Enable ACPI SRAT based node topology detection.
 # Some NUMA nodes have memory ranges that span
@ -1066,7 +1066,7 @@ config NODES_SPAN_OTHER_NODES
 config NUMA_EMU
 	bool "NUMA emulation"
 	depends on X86_64 && NUMA
-	help
+	---help---
 	  Enable NUMA emulation. A flat machine will be split
 	  into virtual nodes when booted with "numa=fake=N", where N is the
 	  number of nodes. This is only useful for debugging.
@ -1079,7 +1079,7 @@ config NODES_SHIFT
 	default "4" if X86_NUMAQ
 	default "3"
 	depends on NEED_MULTIPLE_NODES
-	help
+	---help---
 	  Specify the maximum number of NUMA Nodes available on the target
 	  system.  Increases memory reserved to accomodate various tables.
@ -1134,7 +1134,7 @@ source "mm/Kconfig"
 config HIGHPTE
 	bool "Allocate 3rd-level pagetables from highmem"
 	depends on X86_32 && (HIGHMEM4G || HIGHMEM64G)
-	help
+	---help---
 	  The VM uses one page table entry for each page of physical memory.
 	  For systems with a lot of RAM, this can be wasteful of precious
 	  low memory.  Setting this option will put user-space page table
@ -1142,7 +1142,7 @@ config HIGHPTE
 config X86_CHECK_BIOS_CORRUPTION
 	bool "Check for low memory corruption"
-	help
+	---help---
 	  Periodically check for memory corruption in low memory, which
 	  is suspected to be caused by BIOS.  Even when enabled in the
 	  configuration, it is disabled at runtime.  Enable it by
@ -1166,14 +1166,14 @@ config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
 	bool "Set the default setting of memory_corruption_check"
 	depends on X86_CHECK_BIOS_CORRUPTION
 	default y
-	help
+	---help---
 	  Set whether the default state of memory_corruption_check is
 	  on or off.
 config X86_RESERVE_LOW_64K
 	bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
 	default y
-	help
+	---help---
 	  Reserve the first 64K of physical RAM on BIOSes that are known
 	  to potentially corrupt that memory range. A numbers of BIOSes are
 	  known to utilize this area during suspend/resume, so it must not
@ -1254,7 +1254,7 @@ config MTRR_SANITIZER
 	def_bool y
 	prompt "MTRR cleanup support"
 	depends on MTRR
-	help
+	---help---
 	  Convert MTRR layout from continuous to discrete, so X drivers can
 	  add writeback entries.
@ -1269,7 +1269,7 @@ config MTRR_SANITIZER_ENABLE_DEFAULT
 	range 0 1
 	default "0"
 	depends on MTRR_SANITIZER
-	help
+	---help---
 	  Enable mtrr cleanup default value
 config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
@ -1277,7 +1277,7 @@ config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
 	range 0 7
 	default "1"
 	depends on MTRR_SANITIZER
-	help
+	---help---
 	  mtrr cleanup spare entries default, it can be changed via
 	  mtrr_spare_reg_nr=N on the kernel command line.
@ -1285,7 +1285,7 @@ config X86_PAT
 	bool
 	prompt "x86 PAT support"
 	depends on MTRR
-	help
+	---help---
 	  Use PAT attributes to setup page level cache control.
 	  PATs are the modern equivalents of MTRRs and are much more
@ -1313,7 +1313,7 @@ config EFI
 config SECCOMP
 	def_bool y
 	prompt "Enable seccomp to safely compute untrusted bytecode"
-	help
+	---help---
 	  This kernel feature is useful for number crunching applications
 	  that may need to compute untrusted bytecode during their
 	  execution. By using pipes or other transports made available to
@ -1333,7 +1333,7 @@ config CC_STACKPROTECTOR
 	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
 	depends on X86_64
 	select CC_STACKPROTECTOR_ALL
-	help
+	---help---
 	  This option turns on the -fstack-protector GCC feature. This
 	  feature puts, at the beginning of functions, a canary value on
 	  the stack just before the return address, and validates
@ -1351,7 +1351,7 @@ source kernel/Kconfig.hz
 config KEXEC
 	bool "kexec system call"
-	help
+	---help---
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
 	  but it is independent of the system firmware.   And like a reboot
@ -1368,7 +1368,7 @@ config KEXEC
 config CRASH_DUMP
 	bool "kernel crash dumps"
 	depends on X86_64 || (X86_32 && HIGHMEM)
-	help
+	---help---
 	  Generate crash dump after being started by kexec.
 	  This should be normally only set in special crash dump kernels
 	  which are loaded in the main kernel with kexec-tools into
@ -1383,7 +1383,7 @@ config KEXEC_JUMP
 	bool "kexec jump (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	depends on KEXEC && HIBERNATION && X86_32
-	help
+	---help---
 	  Jump between original kernel and kexeced kernel and invoke
 	  code in physical address mode via KEXEC
@ -1392,7 +1392,7 @@ config PHYSICAL_START
 	default "0x1000000" if X86_NUMAQ
 	default "0x200000" if X86_64
 	default "0x100000"
-	help
+	---help---
 	  This gives the physical address where the kernel is loaded.
 	  If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
@ -1433,7 +1433,7 @@ config PHYSICAL_START
 config RELOCATABLE
 	bool "Build a relocatable kernel (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
-	help
+	---help---
 	  This builds a kernel image that retains relocation information
 	  so it can be loaded someplace besides the default 1MB.
 	  The relocations tend to make the kernel binary about 10% larger,
@ -1453,7 +1453,7 @@ config PHYSICAL_ALIGN
 	default "0x100000" if X86_32
 	default "0x200000" if X86_64
 	range 0x2000 0x400000
-	help
+	---help---
 	  This value puts the alignment restrictions on physical address
 	  where kernel is loaded and run from. Kernel is compiled for an
 	  address which meets above alignment restriction.
@ -1486,7 +1486,7 @@ config COMPAT_VDSO
 	def_bool y
 	prompt "Compat VDSO support"
 	depends on X86_32 || IA32_EMULATION
-	help
+	---help---
 	  Map the 32-bit VDSO to the predictable old-style address too.
 	---help---
 	  Say N here if you are running a sufficiently recent glibc
@ -1498,7 +1498,7 @@ config COMPAT_VDSO
 config CMDLINE_BOOL
 	bool "Built-in kernel command line"
 	default n
-	help
+	---help---
 	  Allow for specifying boot arguments to the kernel at
 	  build time.  On some systems (e.g. embedded ones), it is
 	  necessary or convenient to provide some or all of the
@ -1516,7 +1516,7 @@ config CMDLINE
 	string "Built-in kernel command string"
 	depends on CMDLINE_BOOL
 	default ""
-	help
+	---help---
 	  Enter arguments here that should be compiled into the kernel
 	  image and used at boot time.  If the boot loader provides a
 	  command line at boot time, it is appended to this string to
@ -1533,7 +1533,7 @@ config CMDLINE_OVERRIDE
 	bool "Built-in command line overrides boot loader arguments"
 	default n
 	depends on CMDLINE_BOOL
-	help
+	---help---
 	  Set this option to 'Y' to have the kernel ignore the boot loader
 	  command line, and use ONLY the built-in command line.
@ -1632,7 +1632,7 @@ if APM
 config APM_IGNORE_USER_SUSPEND
 	bool "Ignore USER SUSPEND"
-	help
+	---help---
 	  This option will ignore USER SUSPEND requests. On machines with a
 	  compliant APM BIOS, you want to say N. However, on the NEC Versa M
 	  series notebooks, it is necessary to say Y because of a BIOS bug.
@ -1656,7 +1656,7 @@ config APM_DO_ENABLE
 config APM_CPU_IDLE
 	bool "Make CPU Idle calls when idle"
-	help
+	---help---
 	  Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
 	  On some machines, this can activate improved power savings, such as
 	  a slowed CPU clock rate, when the machine is idle. These idle calls
@ -1667,7 +1667,7 @@ config APM_CPU_IDLE
 config APM_DISPLAY_BLANK
 	bool "Enable console blanking using APM"
-	help
+	---help---
 	  Enable console blanking using the APM. Some laptops can use this to
 	  turn off the LCD backlight when the screen blanker of the Linux
 	  virtual console blanks the screen. Note that this is only used by
@ -1680,7 +1680,7 @@ config APM_DISPLAY_BLANK
 config APM_ALLOW_INTS
 	bool "Allow interrupts during APM BIOS calls"
-	help
+	---help---
 	  Normally we disable external interrupts while we are making calls to
 	  the APM BIOS as a measure to lessen the effects of a badly behaving
 	  BIOS implementation.  The BIOS should reenable interrupts if it
@ -1705,7 +1705,7 @@ config PCI
 	bool "PCI support"
 	default y
 	select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
-	help
+	---help---
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
 	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
@ -1776,7 +1776,7 @@ config PCI_MMCONFIG
 config DMAR
 	bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
 	depends on X86_64 && PCI_MSI && ACPI && EXPERIMENTAL
-	help
+	---help---
 	  DMA remapping (DMAR) devices support enables independent address
 	  translations for Direct Memory Access (DMA) from devices.
 	  These DMA remapping devices are reported via ACPI tables
@ -1798,7 +1798,7 @@ config DMAR_GFX_WA
 	def_bool y
 	prompt "Support for Graphics workaround"
 	depends on DMAR
-	help
+	---help---
 	  Current Graphics drivers tend to use physical address
 	  for DMA and avoid using DMA APIs. Setting this config
 	  option permits the IOMMU driver to set a unity map for
@ -1808,7 +1808,7 @@ config DMAR_GFX_WA
 config DMAR_FLOPPY_WA
 	def_bool y
 	depends on DMAR
-	help
+	---help---
 	  Floppy disk drivers are know to bypass DMA API calls
 	  thereby failing to work when IOMMU is enabled. This
 	  workaround will setup a 1:1 mapping for the first
@ -1817,7 +1817,7 @@ config DMAR_FLOPPY_WA
 config INTR_REMAP
 	bool "Support for Interrupt Remapping (EXPERIMENTAL)"
 	depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL
-	help
+	---help---
 	  Supports Interrupt remapping for IO-APIC and MSI devices.
 	  To use x2apic mode in the CPU's which support x2APIC enhancements or
 	  to support platforms with CPU's having > 8 bit APIC ID, say Y.
@ -1834,7 +1834,7 @@ if X86_32
 config ISA
 	bool "ISA support"
-	help
+	---help---
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
 	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
@ -1861,7 +1861,7 @@ source "drivers/eisa/Kconfig"
 config MCA
 	bool "MCA support"
-	help
+	---help---
 	  MicroChannel Architecture is found in some IBM PS/2 machines and
 	  laptops.  It is a bus system similar to PCI or ISA. See
 	  <file:Documentation/mca.txt> (and especially the web page given
@ -1871,7 +1871,7 @@ source "drivers/mca/Kconfig"
 config SCx200
 	tristate "NatSemi SCx200 support"
-	help
+	---help---
 	  This provides basic support for National Semiconductor's
 	  (now AMD's) Geode processors.  The driver probes for the
 	  PCI-IDs of several on-chip devices, so its a good dependency
@ -1883,7 +1883,7 @@ config SCx200HR_TIMER
 	tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
 	depends on SCx200 && GENERIC_TIME
 	default y
-	help
+	---help---
 	  This driver provides a clocksource built upon the on-chip
 	  27MHz high-resolution timer.  Its also a workaround for
 	  NSC Geode SC-1100's buggy TSC, which loses time when the
@ -1894,7 +1894,7 @@ config GEODE_MFGPT_TIMER
 	def_bool y
 	prompt "Geode Multi-Function General Purpose Timer (MFGPT) events"
 	depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
-	help
+	---help---
 	  This driver provides a clock event source based on the MFGPT
 	  timer(s) in the CS5535 and CS5536 companion chip for the geode.
 	  MFGPTs have a better resolution and max interval than the
@ -1903,7 +1903,7 @@ config GEODE_MFGPT_TIMER
 config OLPC
 	bool "One Laptop Per Child support"
 	default n
-	help
+	---help---
 	  Add support for detecting the unique features of the OLPC
 	  XO hardware.
@ -1928,7 +1928,7 @@ config IA32_EMULATION
 	bool "IA32 Emulation"
 	depends on X86_64
 	select COMPAT_BINFMT_ELF
-	help
+	---help---
 	  Include code to run 32-bit programs under a 64-bit kernel. You should
 	  likely turn this on, unless you're 100% sure that you don't have any
 	  32-bit programs left.
@ -1936,7 +1936,7 @@ config IA32_EMULATION
 config IA32_AOUT
 	tristate "IA32 a.out support"
 	depends on IA32_EMULATION
-       help
+	---help---
 	  Support old a.out binaries in the 32bit emulation.
 config COMPAT
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@ -50,7 +50,7 @@ config M386
 config M486
 	bool "486"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a 486 series processor, either Intel or one of the
 	  compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
 	  DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
@ -59,7 +59,7 @@ config M486
 config M586
 	bool "586/K5/5x86/6x86/6x86MX"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an 586 or 686 series processor such as the AMD K5,
 	  the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
 	  assume the RDTSC (Read Time Stamp Counter) instruction.
@ -67,21 +67,21 @@ config M586
 config M586TSC
 	bool "Pentium-Classic"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Pentium Classic processor with the RDTSC (Read
 	  Time Stamp Counter) instruction for benchmarking.
 config M586MMX
 	bool "Pentium-MMX"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Pentium with the MMX graphics/multimedia
 	  extended instructions.
 config M686
 	bool "Pentium-Pro"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel Pentium Pro chips.  This enables the use of
 	  Pentium Pro extended instructions, and disables the init-time guard
 	  against the f00f bug found in earlier Pentiums.
@ -89,7 +89,7 @@ config M686
 config MPENTIUMII
 	bool "Pentium-II/Celeron(pre-Coppermine)"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel chips based on the Pentium-II and
 	  pre-Coppermine Celeron core.  This option enables an unaligned
 	  copy optimization, compiles the kernel with optimization flags
@ -99,7 +99,7 @@ config MPENTIUMII
 config MPENTIUMIII
 	bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel chips based on the Pentium-III and
 	  Celeron-Coppermine core.  This option enables use of some
 	  extended prefetch instructions in addition to the Pentium II
@ -108,14 +108,14 @@ config MPENTIUMIII
 config MPENTIUMM
 	bool "Pentium M"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel Pentium M (not Pentium-4 M)
 	  notebook chips.
 config MPENTIUM4
 	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
 	depends on X86_32
-	help
+	---help---
 	  Select this for Intel Pentium 4 chips.  This includes the
 	  Pentium 4, Pentium D, P4-based Celeron and Xeon, and
 	  Pentium-4 M (not Pentium M) chips.  This option enables compile
@ -151,7 +151,7 @@ config MPENTIUM4
 config MK6
 	bool "K6/K6-II/K6-III"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an AMD K6-family processor.  Enables use of
 	  some extended instructions, and passes appropriate optimization
 	  flags to GCC.
@ -159,14 +159,14 @@ config MK6
 config MK7
 	bool "Athlon/Duron/K7"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an AMD Athlon K7-family processor.  Enables use of
 	  some extended instructions, and passes appropriate optimization
 	  flags to GCC.
 config MK8
 	bool "Opteron/Athlon64/Hammer/K8"
-	help
+	---help---
 	  Select this for an AMD Opteron or Athlon64 Hammer-family processor.
 	  Enables use of some extended instructions, and passes appropriate
 	  optimization flags to GCC.
@ -174,7 +174,7 @@ config MK8
 config MCRUSOE
 	bool "Crusoe"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Transmeta Crusoe processor.  Treats the processor
 	  like a 586 with TSC, and sets some GCC optimization flags (like a
 	  Pentium Pro with no alignment requirements).
@ -182,13 +182,13 @@ config MCRUSOE
 config MEFFICEON
 	bool "Efficeon"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Transmeta Efficeon processor.
 config MWINCHIPC6
 	bool "Winchip-C6"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an IDT Winchip C6 chip.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
 	  and alignment requirements.
@ -196,7 +196,7 @@ config MWINCHIPC6
 config MWINCHIP3D
 	bool "Winchip-2/Winchip-2A/Winchip-3"
 	depends on X86_32
-	help
+	---help---
 	  Select this for an IDT Winchip-2, 2A or 3.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
 	  and alignment requirements.  Also enable out of order memory
@ -206,19 +206,19 @@ config MWINCHIP3D
 config MGEODEGX1
 	bool "GeodeGX1"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Geode GX1 (Cyrix MediaGX) chip.
 config MGEODE_LX
 	bool "Geode GX/LX"
 	depends on X86_32
-	help
+	---help---
 	  Select this for AMD Geode GX and LX processors.
 config MCYRIXIII
 	bool "CyrixIII/VIA-C3"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
 	  treat this chip as a generic 586. Whilst the CPU is 686 class,
 	  it lacks the cmov extension which gcc assumes is present when
@ -230,7 +230,7 @@ config MCYRIXIII
 config MVIAC3_2
 	bool "VIA C3-2 (Nehemiah)"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a VIA C3 "Nehemiah". Selecting this enables usage
 	  of SSE and tells gcc to treat the CPU as a 686.
 	  Note, this kernel will not boot on older (pre model 9) C3s.
@ -238,14 +238,14 @@ config MVIAC3_2
 config MVIAC7
 	bool "VIA C7"
 	depends on X86_32
-	help
+	---help---
 	  Select this for a VIA C7.  Selecting this uses the correct cache
 	  shift and tells gcc to treat the CPU as a 686.
 config MPSC
 	bool "Intel P4 / older Netburst based Xeon"
 	depends on X86_64
-	help
+	---help---
 	  Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
 	  Xeon CPUs with Intel 64bit which is compatible with x86-64.
 	  Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
@ -255,7 +255,7 @@ config MPSC
 config MCORE2
 	bool "Core 2/newer Xeon"
-	help
+	---help---
 	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and
 	  53xx) CPUs. You can distinguish newer from older Xeons by the CPU
@ -265,7 +265,7 @@ config MCORE2
 config GENERIC_CPU
 	bool "Generic-x86-64"
 	depends on X86_64
-	help
+	---help---
 	  Generic x86-64 CPU.
 	  Run equally well on all x86-64 CPUs.
@ -274,7 +274,7 @@ endchoice
 config X86_GENERIC
 	bool "Generic x86 support"
 	depends on X86_32
-	help
+	---help---
 	  Instead of just including optimizations for the selected
 	  x86 variant (e.g. PII, Crusoe or Athlon), include some more
 	  generic optimizations as well. This will make the kernel
@ -319,7 +319,7 @@ config X86_XADD
 config X86_PPRO_FENCE
 	bool "PentiumPro memory ordering errata workaround"
 	depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
-	help
+	---help---
 	  Old PentiumPro multiprocessor systems had errata that could cause
 	  memory operations to violate the x86 ordering standard in rare cases.
 	  Enabling this option will attempt to work around some (but not all)
@ -412,14 +412,14 @@ config X86_DEBUGCTLMSR
 menuconfig PROCESSOR_SELECT
 	bool "Supported processor vendors" if EMBEDDED
-	help
+	---help---
 	  This lets you choose what x86 vendor support code your kernel
 	  will include.
 config CPU_SUP_INTEL
 	default y
 	bool "Support Intel processors" if PROCESSOR_SELECT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Intel processors
 	  You need this enabled if you want your kernel to run on an
@ -433,7 +433,7 @@ config CPU_SUP_CYRIX_32
 	default y
 	bool "Support Cyrix processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Cyrix processors
 	  You need this enabled if you want your kernel to run on a
@ -446,7 +446,7 @@ config CPU_SUP_CYRIX_32
 config CPU_SUP_AMD
 	default y
 	bool "Support AMD processors" if PROCESSOR_SELECT
-	help
+	---help---
 	  This enables detection, tunings and quirks for AMD processors
 	  You need this enabled if you want your kernel to run on an
@ -460,7 +460,7 @@ config CPU_SUP_CENTAUR_32
 	default y
 	bool "Support Centaur processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Centaur processors
 	  You need this enabled if you want your kernel to run on a
@ -474,7 +474,7 @@ config CPU_SUP_CENTAUR_64
 	default y
 	bool "Support Centaur processors" if PROCESSOR_SELECT
 	depends on 64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Centaur processors
 	  You need this enabled if you want your kernel to run on a
@ -488,7 +488,7 @@ config CPU_SUP_TRANSMETA_32
 	default y
 	bool "Support Transmeta processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for Transmeta processors
 	  You need this enabled if you want your kernel to run on a
@ -502,7 +502,7 @@ config CPU_SUP_UMC_32
 	default y
 	bool "Support UMC processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	help
+	---help---
 	  This enables detection, tunings and quirks for UMC processors
 	  You need this enabled if you want your kernel to run on a
@ -521,7 +521,7 @@ config X86_PTRACE_BTS
 	bool "Branch Trace Store"
 	default y
 	depends on X86_DEBUGCTLMSR
-	help
+	---help---
 	  This adds a ptrace interface to the hardware's branch trace store.
 	  Debuggers may use it to collect an execution trace of the debugged
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@ -7,7 +7,7 @@ source "lib/Kconfig.debug"
 config STRICT_DEVMEM
 	bool "Filter access to /dev/mem"
-	help
+	---help---
 	  If this option is disabled, you allow userspace (root) access to all
 	  of memory, including kernel and userspace memory. Accidental
 	  access to this is obviously disastrous, but specific access can
@ -25,7 +25,7 @@ config STRICT_DEVMEM
 config X86_VERBOSE_BOOTUP
 	bool "Enable verbose x86 bootup info messages"
 	default y
-	help
+	---help---
 	  Enables the informational output from the decompression stage
 	  (e.g. bzImage) of the boot. If you disable this you will still
 	  see errors. Disable this if you want silent bootup.
@ -33,7 +33,7 @@ config X86_VERBOSE_BOOTUP
 config EARLY_PRINTK
 	bool "Early printk" if EMBEDDED
 	default y
-	help
+	---help---
 	  Write kernel log output directly into the VGA buffer or to a serial
 	  port.
@ -47,7 +47,7 @@ config EARLY_PRINTK_DBGP
 	bool "Early printk via EHCI debug port"
 	default n
 	depends on EARLY_PRINTK && PCI
-	help
+	---help---
 	  Write kernel log output directly into the EHCI debug port.
 	  This is useful for kernel debugging when your machine crashes very
@ -59,14 +59,14 @@ config EARLY_PRINTK_DBGP
 config DEBUG_STACKOVERFLOW
 	bool "Check for stack overflows"
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  This option will cause messages to be printed if free stack space
 	  drops below a certain limit.
 config DEBUG_STACK_USAGE
 	bool "Stack utilization instrumentation"
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  Enables the display of the minimum amount of free stack which each
 	  task has ever had available in the sysrq-T and sysrq-P debug output.
@ -75,7 +75,7 @@ config DEBUG_STACK_USAGE
 config DEBUG_PAGEALLOC
 	bool "Debug page memory allocations"
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  Unmap pages from the kernel linear mapping after free_pages().
 	  This results in a large slowdown, but helps to find certain types
 	  of memory corruptions.
@ -85,7 +85,7 @@ config DEBUG_PER_CPU_MAPS
 	depends on DEBUG_KERNEL
 	depends on SMP
 	default n
-	help
+	---help---
 	  Say Y to verify that the per_cpu map being accessed has
 	  been setup.  Adds a fair amount of code to kernel memory
 	  and decreases performance.
@ -96,7 +96,7 @@ config X86_PTDUMP
 	bool "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL
 	select DEBUG_FS
-	help
+	---help---
 	  Say Y here if you want to show the kernel pagetable layout in a
 	  debugfs file. This information is only useful for kernel developers
 	  who are working in architecture specific areas of the kernel.
@ -108,7 +108,7 @@ config DEBUG_RODATA
 	bool "Write protect kernel read-only data structures"
 	default y
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  Mark the kernel read-only data as write-protected in the pagetables,
 	  in order to catch accidental (and incorrect) writes to such const
 	  data. This is recommended so that we can catch kernel bugs sooner.
@ -118,7 +118,7 @@ config DEBUG_RODATA_TEST
 	bool "Testcase for the DEBUG_RODATA feature"
 	depends on DEBUG_RODATA
 	default y
-	help
+	---help---
 	  This option enables a testcase for the DEBUG_RODATA
 	  feature as well as for the change_page_attr() infrastructure.
 	  If in doubt, say "N"
@ -126,7 +126,7 @@ config DEBUG_RODATA_TEST
 config DEBUG_NX_TEST
 	tristate "Testcase for the NX non-executable stack feature"
 	depends on DEBUG_KERNEL && m
-	help
+	---help---
 	  This option enables a testcase for the CPU NX capability
 	  and the software setup of this feature.
 	  If in doubt, say "N"
@ -134,7 +134,7 @@ config DEBUG_NX_TEST
 config 4KSTACKS
 	bool "Use 4Kb for kernel stacks instead of 8Kb"
 	depends on X86_32
-	help
+	---help---
 	  If you say Y here the kernel will use a 4Kb stacksize for the
 	  kernel stack attached to each process/thread. This facilitates
 	  running more threads on a system and also reduces the pressure
@ -145,7 +145,7 @@ config DOUBLEFAULT
 	default y
 	bool "Enable doublefault exception handler" if EMBEDDED
 	depends on X86_32
-	help
+	---help---
 	  This option allows trapping of rare doublefault exceptions that
 	  would otherwise cause a system to silently reboot. Disabling this
 	  option saves about 4k and might cause you much additional grey
@ -155,7 +155,7 @@ config IOMMU_DEBUG
 	bool "Enable IOMMU debugging"
 	depends on GART_IOMMU && DEBUG_KERNEL
 	depends on X86_64
-	help
+	---help---
 	  Force the IOMMU to on even when you have less than 4GB of
 	  memory and add debugging code. On overflow always panic. And
 	  allow to enable IOMMU leak tracing. Can be disabled at boot
@ -171,7 +171,7 @@ config IOMMU_LEAK
 	bool "IOMMU leak tracing"
 	depends on DEBUG_KERNEL
 	depends on IOMMU_DEBUG
-	help
+	---help---
 	  Add a simple leak tracer to the IOMMU code. This is useful when you
 	  are debugging a buggy device driver that leaks IOMMU mappings.
@ -224,25 +224,25 @@ choice
 config IO_DELAY_0X80
 	bool "port 0x80 based port-IO delay [recommended]"
-	help
+	---help---
 	  This is the traditional Linux IO delay used for in/out_p.
 	  It is the most tested hence safest selection here.
 config IO_DELAY_0XED
 	bool "port 0xed based port-IO delay"
-	help
+	---help---
 	  Use port 0xed as the IO delay. This frees up port 0x80 which is
 	  often used as a hardware-debug port.
 config IO_DELAY_UDELAY
 	bool "udelay based port-IO delay"
-	help
+	---help---
 	  Use udelay(2) as the IO delay method. This provides the delay
 	  while not having any side-effect on the IO port space.
 config IO_DELAY_NONE
 	bool "no port-IO delay"
-	help
+	---help---
 	  No port-IO delay. Will break on old boxes that require port-IO
 	  delay for certain operations. Should work on most new machines.
@ -276,18 +276,18 @@ config DEBUG_BOOT_PARAMS
 	bool "Debug boot parameters"
 	depends on DEBUG_KERNEL
 	depends on DEBUG_FS
-	help
+	---help---
 	  This option will cause struct boot_params to be exported via debugfs.
 config CPA_DEBUG
 	bool "CPA self-test code"
 	depends on DEBUG_KERNEL
-	help
+	---help---
 	  Do change_page_attr() self-tests every 30 seconds.
 config OPTIMIZE_INLINING
 	bool "Allow gcc to uninline functions marked 'inline'"
-	help
+	---help---
 	  This option determines if the kernel forces gcc to inline the functions
 	  developers have marked 'inline'. Doing so takes away freedom from gcc to
 	  do what it thinks is best, which is desirable for the gcc 3.x series of
@ -300,4 +300,3 @@ config OPTIMIZE_INLINING
 	  If unsure, say N.
 endmenu