Merge remote-tracking branches 'regulator/topic/arizona', 'regulator/topic/axp20' and 'regulator/topic/bcm590xx' into regulator-next

This commit is contained in:
Mark Brown 2014-06-02 17:08:03 +01:00
Коммит 8ff15e0909
14 изменённых файлов: 594 добавлений и 73 удалений

Просмотреть файл

@ -19,7 +19,9 @@ Optional child nodes:
The valid regulator node names for BCM59056 are:
rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,
mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr
csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr,
gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6,
vbus
Example:
pmu: bcm59056@8 {

Просмотреть файл

@ -508,19 +508,31 @@ int arizona_of_get_type(struct device *dev)
}
EXPORT_SYMBOL_GPL(arizona_of_get_type);
int arizona_of_get_named_gpio(struct arizona *arizona, const char *prop,
bool mandatory)
{
int gpio;
gpio = of_get_named_gpio(arizona->dev->of_node, prop, 0);
if (gpio < 0) {
if (mandatory)
dev_err(arizona->dev,
"Mandatory DT gpio %s missing/malformed: %d\n",
prop, gpio);
gpio = 0;
}
return gpio;
}
EXPORT_SYMBOL_GPL(arizona_of_get_named_gpio);
static int arizona_of_get_core_pdata(struct arizona *arizona)
{
struct arizona_pdata *pdata = &arizona->pdata;
int ret, i;
arizona->pdata.reset = of_get_named_gpio(arizona->dev->of_node,
"wlf,reset", 0);
if (arizona->pdata.reset < 0)
arizona->pdata.reset = 0;
arizona->pdata.ldoena = of_get_named_gpio(arizona->dev->of_node,
"wlf,ldoena", 0);
if (arizona->pdata.ldoena < 0)
arizona->pdata.ldoena = 0;
pdata->reset = arizona_of_get_named_gpio(arizona, "wlf,reset", true);
ret = of_property_read_u32_array(arizona->dev->of_node,
"wlf,gpio-defaults",
@ -652,6 +664,9 @@ int arizona_dev_init(struct arizona *arizona)
return -EINVAL;
}
/* Mark DCVDD as external, LDO1 driver will clear if internal */
arizona->external_dcvdd = true;
ret = mfd_add_devices(arizona->dev, -1, early_devs,
ARRAY_SIZE(early_devs), NULL, 0, NULL);
if (ret != 0) {
@ -851,14 +866,6 @@ int arizona_dev_init(struct arizona *arizona)
arizona->pdata.gpio_defaults[i]);
}
/*
* LDO1 can only be used to supply DCVDD so if it has no
* consumers then DCVDD is supplied externally.
*/
if (arizona->pdata.ldo1 &&
arizona->pdata.ldo1->num_consumer_supplies == 0)
arizona->external_dcvdd = true;
pm_runtime_set_autosuspend_delay(arizona->dev, 100);
pm_runtime_use_autosuspend(arizona->dev);
pm_runtime_enable(arizona->dev);

Просмотреть файл

@ -28,39 +28,71 @@ static const struct mfd_cell bcm590xx_devs[] = {
},
};
static const struct regmap_config bcm590xx_regmap_config = {
static const struct regmap_config bcm590xx_regmap_config_pri = {
.reg_bits = 8,
.val_bits = 8,
.max_register = BCM590XX_MAX_REGISTER,
.max_register = BCM590XX_MAX_REGISTER_PRI,
.cache_type = REGCACHE_RBTREE,
};
static int bcm590xx_i2c_probe(struct i2c_client *i2c,
static const struct regmap_config bcm590xx_regmap_config_sec = {
.reg_bits = 8,
.val_bits = 8,
.max_register = BCM590XX_MAX_REGISTER_SEC,
.cache_type = REGCACHE_RBTREE,
};
static int bcm590xx_i2c_probe(struct i2c_client *i2c_pri,
const struct i2c_device_id *id)
{
struct bcm590xx *bcm590xx;
int ret;
bcm590xx = devm_kzalloc(&i2c->dev, sizeof(*bcm590xx), GFP_KERNEL);
bcm590xx = devm_kzalloc(&i2c_pri->dev, sizeof(*bcm590xx), GFP_KERNEL);
if (!bcm590xx)
return -ENOMEM;
i2c_set_clientdata(i2c, bcm590xx);
bcm590xx->dev = &i2c->dev;
bcm590xx->i2c_client = i2c;
i2c_set_clientdata(i2c_pri, bcm590xx);
bcm590xx->dev = &i2c_pri->dev;
bcm590xx->i2c_pri = i2c_pri;
bcm590xx->regmap = devm_regmap_init_i2c(i2c, &bcm590xx_regmap_config);
if (IS_ERR(bcm590xx->regmap)) {
ret = PTR_ERR(bcm590xx->regmap);
dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret);
bcm590xx->regmap_pri = devm_regmap_init_i2c(i2c_pri,
&bcm590xx_regmap_config_pri);
if (IS_ERR(bcm590xx->regmap_pri)) {
ret = PTR_ERR(bcm590xx->regmap_pri);
dev_err(&i2c_pri->dev, "primary regmap init failed: %d\n", ret);
return ret;
}
ret = mfd_add_devices(&i2c->dev, -1, bcm590xx_devs,
ARRAY_SIZE(bcm590xx_devs), NULL, 0, NULL);
if (ret < 0)
dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
/* Secondary I2C slave address is the base address with A(2) asserted */
bcm590xx->i2c_sec = i2c_new_dummy(i2c_pri->adapter,
i2c_pri->addr | BIT(2));
if (IS_ERR_OR_NULL(bcm590xx->i2c_sec)) {
dev_err(&i2c_pri->dev, "failed to add secondary I2C device\n");
return -ENODEV;
}
i2c_set_clientdata(bcm590xx->i2c_sec, bcm590xx);
bcm590xx->regmap_sec = devm_regmap_init_i2c(bcm590xx->i2c_sec,
&bcm590xx_regmap_config_sec);
if (IS_ERR(bcm590xx->regmap_sec)) {
ret = PTR_ERR(bcm590xx->regmap_sec);
dev_err(&bcm590xx->i2c_sec->dev,
"secondary regmap init failed: %d\n", ret);
goto err;
}
ret = mfd_add_devices(&i2c_pri->dev, -1, bcm590xx_devs,
ARRAY_SIZE(bcm590xx_devs), NULL, 0, NULL);
if (ret < 0) {
dev_err(&i2c_pri->dev, "failed to add sub-devices: %d\n", ret);
goto err;
}
return 0;
err:
i2c_unregister_device(bcm590xx->i2c_sec);
return ret;
}

Просмотреть файл

@ -32,14 +32,6 @@
#define NUM_INT_REG 2
#define TOTAL_NUM_REG 0x18
/* interrupt status registers */
#define TPS65090_INT_STS 0x0
#define TPS65090_INT_STS2 0x1
/* interrupt mask registers */
#define TPS65090_INT_MSK 0x2
#define TPS65090_INT_MSK2 0x3
#define TPS65090_INT1_MASK_VAC_STATUS_CHANGE 1
#define TPS65090_INT1_MASK_VSYS_STATUS_CHANGE 2
#define TPS65090_INT1_MASK_BAT_STATUS_CHANGE 3
@ -64,11 +56,16 @@ static struct resource charger_resources[] = {
}
};
static const struct mfd_cell tps65090s[] = {
{
enum tps65090_cells {
PMIC = 0,
CHARGER = 1,
};
static struct mfd_cell tps65090s[] = {
[PMIC] = {
.name = "tps65090-pmic",
},
{
[CHARGER] = {
.name = "tps65090-charger",
.num_resources = ARRAY_SIZE(charger_resources),
.resources = &charger_resources[0],
@ -139,17 +136,26 @@ static struct regmap_irq_chip tps65090_irq_chip = {
.irqs = tps65090_irqs,
.num_irqs = ARRAY_SIZE(tps65090_irqs),
.num_regs = NUM_INT_REG,
.status_base = TPS65090_INT_STS,
.mask_base = TPS65090_INT_MSK,
.status_base = TPS65090_REG_INTR_STS,
.mask_base = TPS65090_REG_INTR_MASK,
.mask_invert = true,
};
static bool is_volatile_reg(struct device *dev, unsigned int reg)
{
if ((reg == TPS65090_INT_STS) || (reg == TPS65090_INT_STS2))
return true;
else
/* Nearly all registers have status bits mixed in, except a few */
switch (reg) {
case TPS65090_REG_INTR_MASK:
case TPS65090_REG_INTR_MASK2:
case TPS65090_REG_CG_CTRL0:
case TPS65090_REG_CG_CTRL1:
case TPS65090_REG_CG_CTRL2:
case TPS65090_REG_CG_CTRL3:
case TPS65090_REG_CG_CTRL4:
case TPS65090_REG_CG_CTRL5:
return false;
}
return true;
}
static const struct regmap_config tps65090_regmap_config = {
@ -211,6 +217,9 @@ static int tps65090_i2c_probe(struct i2c_client *client,
"IRQ init failed with err: %d\n", ret);
return ret;
}
} else {
/* Don't tell children they have an IRQ that'll never fire */
tps65090s[CHARGER].num_resources = 0;
}
ret = mfd_add_devices(tps65090->dev, -1, tps65090s,

Просмотреть файл

@ -28,17 +28,6 @@
#include <linux/mfd/tps65090.h>
#define TPS65090_REG_INTR_STS 0x00
#define TPS65090_REG_INTR_MASK 0x02
#define TPS65090_REG_CG_CTRL0 0x04
#define TPS65090_REG_CG_CTRL1 0x05
#define TPS65090_REG_CG_CTRL2 0x06
#define TPS65090_REG_CG_CTRL3 0x07
#define TPS65090_REG_CG_CTRL4 0x08
#define TPS65090_REG_CG_CTRL5 0x09
#define TPS65090_REG_CG_STATUS1 0x0a
#define TPS65090_REG_CG_STATUS2 0x0b
#define TPS65090_CHARGER_ENABLE BIT(0)
#define TPS65090_VACG BIT(1)
#define TPS65090_NOITERM BIT(5)

Просмотреть файл

@ -139,6 +139,13 @@ config REGULATOR_AS3722
AS3722 PMIC. This will enable support for all the software
controllable DCDC/LDO regulators.
config REGULATOR_AXP20X
tristate "X-POWERS AXP20X PMIC Regulators"
depends on MFD_AXP20X
help
This driver provides support for the voltage regulators on the
AXP20X PMIC.
config REGULATOR_BCM590XX
tristate "Broadcom BCM590xx PMU Regulators"
depends on MFD_BCM590XX

Просмотреть файл

@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o

Просмотреть файл

@ -16,9 +16,11 @@
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/gpio.h>
#include <linux/slab.h>
@ -178,6 +180,42 @@ static const struct regulator_init_data arizona_ldo1_default = {
.num_consumer_supplies = 1,
};
static int arizona_ldo1_of_get_pdata(struct arizona *arizona,
struct regulator_config *config)
{
struct arizona_pdata *pdata = &arizona->pdata;
struct arizona_ldo1 *ldo1 = config->driver_data;
struct device_node *init_node, *dcvdd_node;
struct regulator_init_data *init_data;
pdata->ldoena = arizona_of_get_named_gpio(arizona, "wlf,ldoena", true);
init_node = of_get_child_by_name(arizona->dev->of_node, "ldo1");
dcvdd_node = of_parse_phandle(arizona->dev->of_node, "DCVDD-supply", 0);
if (init_node) {
config->of_node = init_node;
init_data = of_get_regulator_init_data(arizona->dev, init_node);
if (init_data) {
init_data->consumer_supplies = &ldo1->supply;
init_data->num_consumer_supplies = 1;
if (dcvdd_node && dcvdd_node != init_node)
arizona->external_dcvdd = true;
pdata->ldo1 = init_data;
}
} else if (dcvdd_node) {
arizona->external_dcvdd = true;
}
of_node_put(dcvdd_node);
return 0;
}
static int arizona_ldo1_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
@ -186,6 +224,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
struct arizona_ldo1 *ldo1;
int ret;
arizona->external_dcvdd = false;
ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL);
if (!ldo1)
return -ENOMEM;
@ -216,6 +256,15 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
config.dev = arizona->dev;
config.driver_data = ldo1;
config.regmap = arizona->regmap;
if (IS_ENABLED(CONFIG_OF)) {
if (!dev_get_platdata(arizona->dev)) {
ret = arizona_ldo1_of_get_pdata(arizona, &config);
if (ret < 0)
return ret;
}
}
config.ena_gpio = arizona->pdata.ldoena;
if (arizona->pdata.ldo1)
@ -223,6 +272,13 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
else
config.init_data = &ldo1->init_data;
/*
* LDO1 can only be used to supply DCVDD so if it has no
* consumers then DCVDD is supplied externally.
*/
if (config.init_data->num_consumer_supplies == 0)
arizona->external_dcvdd = true;
ldo1->regulator = devm_regulator_register(&pdev->dev, desc, &config);
if (IS_ERR(ldo1->regulator)) {
ret = PTR_ERR(ldo1->regulator);
@ -231,6 +287,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
return ret;
}
of_node_put(config.of_node);
platform_set_drvdata(pdev, ldo1);
return 0;

Просмотреть файл

@ -16,9 +16,11 @@
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
@ -195,6 +197,32 @@ static const struct regulator_init_data arizona_micsupp_ext_default = {
.num_consumer_supplies = 1,
};
static int arizona_micsupp_of_get_pdata(struct arizona *arizona,
struct regulator_config *config)
{
struct arizona_pdata *pdata = &arizona->pdata;
struct arizona_micsupp *micsupp = config->driver_data;
struct device_node *np;
struct regulator_init_data *init_data;
np = of_get_child_by_name(arizona->dev->of_node, "micvdd");
if (np) {
config->of_node = np;
init_data = of_get_regulator_init_data(arizona->dev, np);
if (init_data) {
init_data->consumer_supplies = &micsupp->supply;
init_data->num_consumer_supplies = 1;
pdata->micvdd = init_data;
}
}
return 0;
}
static int arizona_micsupp_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
@ -234,6 +262,14 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
config.driver_data = micsupp;
config.regmap = arizona->regmap;
if (IS_ENABLED(CONFIG_OF)) {
if (!dev_get_platdata(arizona->dev)) {
ret = arizona_micsupp_of_get_pdata(arizona, &config);
if (ret < 0)
return ret;
}
}
if (arizona->pdata.micvdd)
config.init_data = arizona->pdata.micvdd;
else
@ -253,6 +289,8 @@ static int arizona_micsupp_probe(struct platform_device *pdev)
return ret;
}
of_node_put(config.of_node);
platform_set_drvdata(pdev, micsupp);
return 0;

Просмотреть файл

@ -0,0 +1,286 @@
/*
* AXP20x regulators driver.
*
* Copyright (C) 2013 Carlo Caione <carlo@caione.org>
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file "COPYING" in the main directory of this
* archive for more details.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/err.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/axp20x.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
#define AXP20X_IO_ENABLED 0x03
#define AXP20X_IO_DISABLED 0x07
#define AXP20X_WORKMODE_DCDC2_MASK BIT(2)
#define AXP20X_WORKMODE_DCDC3_MASK BIT(1)
#define AXP20X_FREQ_DCDC_MASK 0x0f
#define AXP20X_DESC_IO(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \
_emask, _enable_val, _disable_val) \
[AXP20X_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
.type = REGULATOR_VOLTAGE, \
.id = AXP20X_##_id, \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
.min_uV = (_min) * 1000, \
.uV_step = (_step) * 1000, \
.vsel_reg = (_vreg), \
.vsel_mask = (_vmask), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.enable_val = (_enable_val), \
.disable_val = (_disable_val), \
.ops = &axp20x_ops, \
}
#define AXP20X_DESC(_id, _supply, _min, _max, _step, _vreg, _vmask, _ereg, \
_emask) \
[AXP20X_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
.type = REGULATOR_VOLTAGE, \
.id = AXP20X_##_id, \
.n_voltages = (((_max) - (_min)) / (_step) + 1), \
.owner = THIS_MODULE, \
.min_uV = (_min) * 1000, \
.uV_step = (_step) * 1000, \
.vsel_reg = (_vreg), \
.vsel_mask = (_vmask), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.ops = &axp20x_ops, \
}
#define AXP20X_DESC_FIXED(_id, _supply, _volt) \
[AXP20X_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
.type = REGULATOR_VOLTAGE, \
.id = AXP20X_##_id, \
.n_voltages = 1, \
.owner = THIS_MODULE, \
.min_uV = (_volt) * 1000, \
.ops = &axp20x_ops_fixed \
}
#define AXP20X_DESC_TABLE(_id, _supply, _table, _vreg, _vmask, _ereg, _emask) \
[AXP20X_##_id] = { \
.name = #_id, \
.supply_name = (_supply), \
.type = REGULATOR_VOLTAGE, \
.id = AXP20X_##_id, \
.n_voltages = ARRAY_SIZE(_table), \
.owner = THIS_MODULE, \
.vsel_reg = (_vreg), \
.vsel_mask = (_vmask), \
.enable_reg = (_ereg), \
.enable_mask = (_emask), \
.volt_table = (_table), \
.ops = &axp20x_ops_table, \
}
static const int axp20x_ldo4_data[] = { 1250000, 1300000, 1400000, 1500000, 1600000,
1700000, 1800000, 1900000, 2000000, 2500000,
2700000, 2800000, 3000000, 3100000, 3200000,
3300000 };
static struct regulator_ops axp20x_ops_fixed = {
.list_voltage = regulator_list_voltage_linear,
};
static struct regulator_ops axp20x_ops_table = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_table,
.map_voltage = regulator_map_voltage_ascend,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
static struct regulator_ops axp20x_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
static const struct regulator_desc axp20x_regulators[] = {
AXP20X_DESC(DCDC2, "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f,
AXP20X_PWR_OUT_CTRL, 0x10),
AXP20X_DESC(DCDC3, "vin3", 700, 3500, 25, AXP20X_DCDC3_V_OUT, 0x7f,
AXP20X_PWR_OUT_CTRL, 0x02),
AXP20X_DESC_FIXED(LDO1, "acin", 1300),
AXP20X_DESC(LDO2, "ldo24in", 1800, 3300, 100, AXP20X_LDO24_V_OUT, 0xf0,
AXP20X_PWR_OUT_CTRL, 0x04),
AXP20X_DESC(LDO3, "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f,
AXP20X_PWR_OUT_CTRL, 0x40),
AXP20X_DESC_TABLE(LDO4, "ldo24in", axp20x_ldo4_data, AXP20X_LDO24_V_OUT, 0x0f,
AXP20X_PWR_OUT_CTRL, 0x08),
AXP20X_DESC_IO(LDO5, "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0,
AXP20X_GPIO0_CTRL, 0x07, AXP20X_IO_ENABLED,
AXP20X_IO_DISABLED),
};
#define AXP_MATCH(_name, _id) \
[AXP20X_##_id] = { \
.name = #_name, \
.driver_data = (void *) &axp20x_regulators[AXP20X_##_id], \
}
static struct of_regulator_match axp20x_matches[] = {
AXP_MATCH(dcdc2, DCDC2),
AXP_MATCH(dcdc3, DCDC3),
AXP_MATCH(ldo1, LDO1),
AXP_MATCH(ldo2, LDO2),
AXP_MATCH(ldo3, LDO3),
AXP_MATCH(ldo4, LDO4),
AXP_MATCH(ldo5, LDO5),
};
static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
{
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
if (dcdcfreq < 750) {
dcdcfreq = 750;
dev_warn(&pdev->dev, "DCDC frequency too low. Set to 750kHz\n");
}
if (dcdcfreq > 1875) {
dcdcfreq = 1875;
dev_warn(&pdev->dev, "DCDC frequency too high. Set to 1875kHz\n");
}
dcdcfreq = (dcdcfreq - 750) / 75;
return regmap_update_bits(axp20x->regmap, AXP20X_DCDC_FREQ,
AXP20X_FREQ_DCDC_MASK, dcdcfreq);
}
static int axp20x_regulator_parse_dt(struct platform_device *pdev)
{
struct device_node *np, *regulators;
int ret;
u32 dcdcfreq;
np = of_node_get(pdev->dev.parent->of_node);
if (!np)
return 0;
regulators = of_get_child_by_name(np, "regulators");
if (!regulators) {
dev_warn(&pdev->dev, "regulators node not found\n");
} else {
ret = of_regulator_match(&pdev->dev, regulators, axp20x_matches,
ARRAY_SIZE(axp20x_matches));
if (ret < 0) {
dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret);
return ret;
}
dcdcfreq = 1500;
of_property_read_u32(regulators, "x-powers,dcdc-freq", &dcdcfreq);
ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
if (ret < 0) {
dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret);
return ret;
}
of_node_put(regulators);
}
return 0;
}
static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode)
{
unsigned int mask = AXP20X_WORKMODE_DCDC2_MASK;
if ((id != AXP20X_DCDC2) && (id != AXP20X_DCDC3))
return -EINVAL;
if (id == AXP20X_DCDC3)
mask = AXP20X_WORKMODE_DCDC3_MASK;
workmode <<= ffs(mask) - 1;
return regmap_update_bits(rdev->regmap, AXP20X_DCDC_MODE, mask, workmode);
}
static int axp20x_regulator_probe(struct platform_device *pdev)
{
struct regulator_dev *rdev;
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = { };
struct regulator_init_data *init_data;
int ret, i;
u32 workmode;
ret = axp20x_regulator_parse_dt(pdev);
if (ret)
return ret;
for (i = 0; i < AXP20X_REG_ID_MAX; i++) {
init_data = axp20x_matches[i].init_data;
config.dev = &pdev->dev;
config.init_data = init_data;
config.regmap = axp20x->regmap;
config.of_node = axp20x_matches[i].of_node;
rdev = devm_regulator_register(&pdev->dev, &axp20x_regulators[i],
&config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "Failed to register %s\n",
axp20x_regulators[i].name);
return PTR_ERR(rdev);
}
ret = of_property_read_u32(axp20x_matches[i].of_node, "x-powers,dcdc-workmode",
&workmode);
if (!ret) {
if (axp20x_set_dcdc_workmode(rdev, i, workmode))
dev_err(&pdev->dev, "Failed to set workmode on %s\n",
axp20x_regulators[i].name);
}
}
return 0;
}
static struct platform_driver axp20x_regulator_driver = {
.probe = axp20x_regulator_probe,
.driver = {
.name = "axp20x-regulator",
.owner = THIS_MODULE,
},
};
module_platform_driver(axp20x_regulator_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
MODULE_DESCRIPTION("Regulator Driver for AXP20X PMIC");

Просмотреть файл

@ -22,7 +22,7 @@
#include <linux/regulator/of_regulator.h>
#include <linux/slab.h>
/* Register defs */
/* I2C slave 0 registers */
#define BCM590XX_RFLDOPMCTRL1 0x60
#define BCM590XX_IOSR1PMCTRL1 0x7a
#define BCM590XX_IOSR2PMCTRL1 0x7c
@ -31,13 +31,34 @@
#define BCM590XX_SDSR2PMCTRL1 0x86
#define BCM590XX_MSRPMCTRL1 0x8a
#define BCM590XX_VSRPMCTRL1 0x8e
#define BCM590XX_REG_ENABLE BIT(7)
#define BCM590XX_RFLDOCTRL 0x96
#define BCM590XX_CSRVOUT1 0xc0
/* I2C slave 1 registers */
#define BCM590XX_GPLDO5PMCTRL1 0x16
#define BCM590XX_GPLDO6PMCTRL1 0x18
#define BCM590XX_GPLDO1CTRL 0x1a
#define BCM590XX_GPLDO2CTRL 0x1b
#define BCM590XX_GPLDO3CTRL 0x1c
#define BCM590XX_GPLDO4CTRL 0x1d
#define BCM590XX_GPLDO5CTRL 0x1e
#define BCM590XX_GPLDO6CTRL 0x1f
#define BCM590XX_OTG_CTRL 0x40
#define BCM590XX_GPLDO1PMCTRL1 0x57
#define BCM590XX_GPLDO2PMCTRL1 0x59
#define BCM590XX_GPLDO3PMCTRL1 0x5b
#define BCM590XX_GPLDO4PMCTRL1 0x5d
#define BCM590XX_REG_ENABLE BIT(7)
#define BCM590XX_VBUS_ENABLE BIT(2)
#define BCM590XX_LDO_VSEL_MASK GENMASK(5, 3)
#define BCM590XX_SR_VSEL_MASK GENMASK(5, 0)
/*
* RFLDO to VSR regulators are
* accessed via I2C slave 0
*/
/* LDO regulator IDs */
#define BCM590XX_REG_RFLDO 0
#define BCM590XX_REG_CAMLDO1 1
@ -62,9 +83,25 @@
#define BCM590XX_REG_SDSR2 18
#define BCM590XX_REG_VSR 19
#define BCM590XX_NUM_REGS 20
/*
* GPLDO1 to VBUS regulators are
* accessed via I2C slave 1
*/
#define BCM590XX_REG_GPLDO1 20
#define BCM590XX_REG_GPLDO2 21
#define BCM590XX_REG_GPLDO3 22
#define BCM590XX_REG_GPLDO4 23
#define BCM590XX_REG_GPLDO5 24
#define BCM590XX_REG_GPLDO6 25
#define BCM590XX_REG_VBUS 26
#define BCM590XX_NUM_REGS 27
#define BCM590XX_REG_IS_LDO(n) (n < BCM590XX_REG_CSR)
#define BCM590XX_REG_IS_GPLDO(n) \
((n > BCM590XX_REG_VSR) && (n < BCM590XX_REG_VBUS))
#define BCM590XX_REG_IS_VBUS(n) (n == BCM590XX_REG_VBUS)
struct bcm590xx_board {
struct regulator_init_data *bcm590xx_pmu_init_data[BCM590XX_NUM_REGS];
@ -149,6 +186,12 @@ static struct bcm590xx_info bcm590xx_regs[] = {
BCM590XX_REG_RANGES(sdsr1, dcdc_sdsr1_ranges),
BCM590XX_REG_RANGES(sdsr2, dcdc_iosr1_ranges),
BCM590XX_REG_RANGES(vsr, dcdc_iosr1_ranges),
BCM590XX_REG_TABLE(gpldo1, ldo_a_table),
BCM590XX_REG_TABLE(gpldo2, ldo_a_table),
BCM590XX_REG_TABLE(gpldo3, ldo_a_table),
BCM590XX_REG_TABLE(gpldo4, ldo_a_table),
BCM590XX_REG_TABLE(gpldo5, ldo_a_table),
BCM590XX_REG_TABLE(gpldo6, ldo_a_table),
};
struct bcm590xx_reg {
@ -161,6 +204,8 @@ static int bcm590xx_get_vsel_register(int id)
{
if (BCM590XX_REG_IS_LDO(id))
return BCM590XX_RFLDOCTRL + id;
else if (BCM590XX_REG_IS_GPLDO(id))
return BCM590XX_GPLDO1CTRL + id;
else
return BCM590XX_CSRVOUT1 + (id - BCM590XX_REG_CSR) * 3;
}
@ -171,6 +216,8 @@ static int bcm590xx_get_enable_register(int id)
if (BCM590XX_REG_IS_LDO(id))
reg = BCM590XX_RFLDOPMCTRL1 + id * 2;
else if (BCM590XX_REG_IS_GPLDO(id))
reg = BCM590XX_GPLDO1PMCTRL1 + id * 2;
else
switch (id) {
case BCM590XX_REG_CSR:
@ -191,8 +238,11 @@ static int bcm590xx_get_enable_register(int id)
case BCM590XX_REG_SDSR2:
reg = BCM590XX_SDSR2PMCTRL1;
break;
case BCM590XX_REG_VBUS:
reg = BCM590XX_OTG_CTRL;
};
return reg;
}
@ -216,6 +266,12 @@ static struct regulator_ops bcm590xx_ops_dcdc = {
.map_voltage = regulator_map_voltage_linear_range,
};
static struct regulator_ops bcm590xx_ops_vbus = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
};
#define BCM590XX_MATCH(_name, _id) \
{ \
.name = #_name, \
@ -243,6 +299,13 @@ static struct of_regulator_match bcm590xx_matches[] = {
BCM590XX_MATCH(sdsr1, SDSR1),
BCM590XX_MATCH(sdsr2, SDSR2),
BCM590XX_MATCH(vsr, VSR),
BCM590XX_MATCH(gpldo1, GPLDO1),
BCM590XX_MATCH(gpldo2, GPLDO2),
BCM590XX_MATCH(gpldo3, GPLDO3),
BCM590XX_MATCH(gpldo4, GPLDO4),
BCM590XX_MATCH(gpldo5, GPLDO5),
BCM590XX_MATCH(gpldo6, GPLDO6),
BCM590XX_MATCH(vbus, VBUS),
};
static struct bcm590xx_board *bcm590xx_parse_dt_reg_data(
@ -353,17 +416,23 @@ static int bcm590xx_probe(struct platform_device *pdev)
pmu->desc[i].linear_ranges = info->linear_ranges;
pmu->desc[i].n_linear_ranges = info->n_linear_ranges;
if (BCM590XX_REG_IS_LDO(i)) {
if ((BCM590XX_REG_IS_LDO(i)) || (BCM590XX_REG_IS_GPLDO(i))) {
pmu->desc[i].ops = &bcm590xx_ops_ldo;
pmu->desc[i].vsel_mask = BCM590XX_LDO_VSEL_MASK;
} else {
} else if (BCM590XX_REG_IS_VBUS(i))
pmu->desc[i].ops = &bcm590xx_ops_vbus;
else {
pmu->desc[i].ops = &bcm590xx_ops_dcdc;
pmu->desc[i].vsel_mask = BCM590XX_SR_VSEL_MASK;
}
pmu->desc[i].vsel_reg = bcm590xx_get_vsel_register(i);
pmu->desc[i].enable_is_inverted = true;
pmu->desc[i].enable_mask = BCM590XX_REG_ENABLE;
if (BCM590XX_REG_IS_VBUS(i))
pmu->desc[i].enable_mask = BCM590XX_VBUS_ENABLE;
else {
pmu->desc[i].vsel_reg = bcm590xx_get_vsel_register(i);
pmu->desc[i].enable_is_inverted = true;
pmu->desc[i].enable_mask = BCM590XX_REG_ENABLE;
}
pmu->desc[i].enable_reg = bcm590xx_get_enable_register(i);
pmu->desc[i].type = REGULATOR_VOLTAGE;
pmu->desc[i].owner = THIS_MODULE;
@ -371,7 +440,10 @@ static int bcm590xx_probe(struct platform_device *pdev)
config.dev = bcm590xx->dev;
config.init_data = reg_data;
config.driver_data = pmu;
config.regmap = bcm590xx->regmap;
if (BCM590XX_REG_IS_GPLDO(i) || BCM590XX_REG_IS_VBUS(i))
config.regmap = bcm590xx->regmap_sec;
else
config.regmap = bcm590xx->regmap_pri;
if (bcm590xx_reg_matches)
config.of_node = bcm590xx_reg_matches[i].of_node;

Просмотреть файл

@ -124,4 +124,7 @@ int wm5102_patch(struct arizona *arizona);
int wm5110_patch(struct arizona *arizona);
int wm8997_patch(struct arizona *arizona);
extern int arizona_of_get_named_gpio(struct arizona *arizona, const char *prop,
bool mandatory);
#endif

Просмотреть файл

@ -19,12 +19,15 @@
#include <linux/regmap.h>
/* max register address */
#define BCM590XX_MAX_REGISTER 0xe7
#define BCM590XX_MAX_REGISTER_PRI 0xe7
#define BCM590XX_MAX_REGISTER_SEC 0xf0
struct bcm590xx {
struct device *dev;
struct i2c_client *i2c_client;
struct regmap *regmap;
struct i2c_client *i2c_pri;
struct i2c_client *i2c_sec;
struct regmap *regmap_pri;
struct regmap *regmap_sec;
unsigned int id;
};

Просмотреть файл

@ -64,6 +64,20 @@ enum {
TPS65090_REGULATOR_MAX,
};
/* Register addresses */
#define TPS65090_REG_INTR_STS 0x00
#define TPS65090_REG_INTR_STS2 0x01
#define TPS65090_REG_INTR_MASK 0x02
#define TPS65090_REG_INTR_MASK2 0x03
#define TPS65090_REG_CG_CTRL0 0x04
#define TPS65090_REG_CG_CTRL1 0x05
#define TPS65090_REG_CG_CTRL2 0x06
#define TPS65090_REG_CG_CTRL3 0x07
#define TPS65090_REG_CG_CTRL4 0x08
#define TPS65090_REG_CG_CTRL5 0x09
#define TPS65090_REG_CG_STATUS1 0x0a
#define TPS65090_REG_CG_STATUS2 0x0b
struct tps65090 {
struct device *dev;
struct regmap *rmap;