microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

[PATCH] Replace 0xff.. with correct DMA_xBIT_MASK 

Replace all occurences of 0xff..  in calls to function pci_set_dma_mask()
and pci_set_consistant_dma_mask() with the corresponding DMA_xBIT_MASK from
linux/dma-mapping.h.

Signed-off-by: Matthias Gehre <M.Gehre@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Matthias Gehre 2006-03-28 01:56:48 -08:00 коммит произвёл Linus Torvalds
Родитель 60c904ae5b
Коммит 910638ae7e
38 изменённых файлов: 88 добавлений и 51 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

2
Documentation/DMA-mapping.txt
Просмотреть файл

@ -199,6 +199,8 @@ address during PCI bus mastering you might do something like:
"mydev: 24-bit DMA addressing not available.\n");
goto ignore_this_device;
}
[Better use DMA_24BIT_MASK instead of 0x00ffffff.
See linux/include/dma-mapping.h for reference.]
When pci_set_dma_mask() is successful, and returns zero, the PCI layer
saves away this mask you have provided. The PCI layer will use this

2
drivers/atm/lanai.c
Просмотреть файл

@ -1972,7 +1972,7 @@ static int __devinit lanai_pci_start(struct lanai_dev *lanai)
"(itf %d): No suitable DMA available.\n", lanai->number);
return -EBUSY;
}
if (pci_set_consistent_dma_mask(pci, 0xFFFFFFFF) != 0) {
if (pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK) != 0) {
printk(KERN_WARNING DEV_LABEL
"(itf %d): No suitable DMA available.\n", lanai->number);
return -EBUSY;

5
drivers/block/umem.c
Просмотреть файл

@ -50,6 +50,7 @@
#include <linux/timer.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/fcntl.h> /* O_ACCMODE */
#include <linux/hdreg.h> /* HDIO_GETGEO */
@ -881,8 +882,8 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i
printk(KERN_INFO "Micro Memory(tm) controller #%d found at %02x:%02x (PCI Mem Module (Battery Backup))\n",
card->card_number, dev->bus->number, dev->devfn);
if (pci_set_dma_mask(dev, 0xffffffffffffffffLL) &&
pci_set_dma_mask(dev, 0xffffffffLL)) {
if (pci_set_dma_mask(dev, DMA_64BIT_MASK) &&
pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "MM%d: NO suitable DMA found\n",num_cards);
return -ENOMEM;
}

3
drivers/net/forcedeth.c
Просмотреть файл

@ -134,6 +134,7 @@
#include <linux/random.h>
#include <linux/init.h>
#include <linux/if_vlan.h>
#include <linux/dma-mapping.h>
#include <asm/irq.h>
#include <asm/io.h>
@ -2932,7 +2933,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
if (id->driver_data & DEV_HAS_HIGH_DMA) {
/* packet format 3: supports 40-bit addressing */
np->desc_ver = DESC_VER_3;
if (pci_set_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
if (pci_set_dma_mask(pci_dev, DMA_39BIT_MASK)) {
printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n",
pci_name(pci_dev));
} else {

7
drivers/net/ioc3-eth.c
Просмотреть файл

@ -44,6 +44,7 @@
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/dma-mapping.h>
#ifdef CONFIG_SERIAL_8250
#include <linux/serial_core.h>
@ -1195,17 +1196,17 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
int err, pci_using_dac;
/* Configure DMA attributes. */
err = pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
if (!err) {
pci_using_dac = 1;
err = pci_set_consistent_dma_mask(pdev, 0xffffffffffffffffULL);
err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
if (err < 0) {
printk(KERN_ERR "%s: Unable to obtain 64 bit DMA "
"for consistent allocations\n", pci_name(pdev));
goto out;
}
} else {
err = pci_set_dma_mask(pdev, 0xffffffffULL);
err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
printk(KERN_ERR "%s: No usable DMA configuration, "
"aborting.\n", pci_name(pdev));

6
drivers/net/ns83820.c
Просмотреть файл

@ -1828,10 +1828,10 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_
int using_dac = 0;
/* See if we can set the dma mask early on; failure is fatal. */
if (sizeof(dma_addr_t) == 8 &&
!pci_set_dma_mask(pci_dev, 0xffffffffffffffffULL)) {
if (sizeof(dma_addr_t) == 8 &&
!pci_set_dma_mask(pci_dev, DMA_64BIT_MASK)) {
using_dac = 1;
} else if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
} else if (!pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) {
using_dac = 0;
} else {
printk(KERN_WARNING "ns83820.c: pci_set_dma_mask failed!\n");

4
drivers/net/wan/wanxl.c
Просмотреть файл

@ -577,8 +577,8 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
We set both dma_mask and consistent_dma_mask to 28 bits
and pray pci_alloc_consistent() will use this info. It should
work on most platforms */
if (pci_set_consistent_dma_mask(pdev, 0x0FFFFFFF) ||
pci_set_dma_mask(pdev, 0x0FFFFFFF)) {
if (pci_set_consistent_dma_mask(pdev, DMA_28BIT_MASK) ||
pci_set_dma_mask(pdev, DMA_28BIT_MASK)) {
printk(KERN_ERR "wanXL: No usable DMA configuration\n");
return -EIO;
}

3
drivers/net/wireless/prism54/islpci_hotplug.c
Просмотреть файл

@ -22,6 +22,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/init.h> /* For __init, __exit */
#include <linux/dma-mapping.h>
#include "prismcompat.h"
#include "islpci_dev.h"
@ -124,7 +125,7 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
/* enable PCI DMA */
if (pci_set_dma_mask(pdev, 0xffffffff)) {
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_ERR "%s: 32-bit PCI DMA not supported", DRV_NAME);
goto do_pci_disable_device;
}

7
drivers/scsi/BusLogic.c
Просмотреть файл

@ -42,6 +42,7 @@
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/jiffies.h>
#include <linux/dma-mapping.h>
#include <scsi/scsicam.h>
#include <asm/dma.h>
@ -677,7 +678,7 @@ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAd
if (pci_enable_device(PCI_Device))
continue;
if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK ))
continue;
Bus = PCI_Device->bus->number;
@ -832,7 +833,7 @@ static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAd
if (pci_enable_device(PCI_Device))
continue;
if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK))
continue;
Bus = PCI_Device->bus->number;
@ -886,7 +887,7 @@ static int __init BusLogic_InitializeFlashPointProbeInfo(struct BusLogic_HostAda
if (pci_enable_device(PCI_Device))
continue;
if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
if (pci_set_dma_mask(PCI_Device, DMA_32BIT_MASK))
continue;
Bus = PCI_Device->bus->number;

3
drivers/scsi/a100u2w.c
Просмотреть файл

@ -89,6 +89,7 @@
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/irq.h>
@ -1052,7 +1053,7 @@ static int __devinit inia100_probe_one(struct pci_dev *pdev,
if (pci_enable_device(pdev))
goto out;
if (pci_set_dma_mask(pdev, 0xffffffffULL)) {
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "Unable to set 32bit DMA "
"on inia100 adapter, ignoring.\n");
goto out_disable_device;

1
drivers/scsi/aacraid/aachba.c
Просмотреть файл

@ -32,6 +32,7 @@
#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/blkdev.h>
#include <linux/dma-mapping.h>
#include <asm/semaphore.h>
#include <asm/uaccess.h>

5
drivers/scsi/aacraid/linit.c
Просмотреть файл

@ -45,6 +45,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/dma-mapping.h>
#include <linux/syscalls.h>
#include <linux/delay.h>
#include <linux/smp_lock.h>
@ -806,8 +807,8 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
* to driver communication memory to be allocated below 2gig
*/
if (aac_drivers[index].quirks & AAC_QUIRK_31BIT)
if (pci_set_dma_mask(pdev, 0x7FFFFFFFULL) ||
pci_set_consistent_dma_mask(pdev, 0x7FFFFFFFULL))
if (pci_set_dma_mask(pdev, DMA_31BIT_MASK) ||
pci_set_consistent_dma_mask(pdev, DMA_31BIT_MASK))
goto out;
pci_set_master(pdev);

3
drivers/scsi/atp870u.c
Просмотреть файл

@ -28,6 +28,7 @@
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
#include <linux/dma-mapping.h>
#include <asm/system.h>
#include <asm/io.h>
@ -2631,7 +2632,7 @@ static int atp870u_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
if (pci_enable_device(pdev))
return -EIO;
if (!pci_set_dma_mask(pdev, 0xFFFFFFFFUL)) {
if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_INFO "atp870u: use 32bit DMA mask.\n");
} else {
printk(KERN_ERR "atp870u: DMA mask required but not available.\n");

5
drivers/scsi/dpt_i2o.c
Просмотреть файл

@ -57,6 +57,7 @@ MODULE_DESCRIPTION("Adaptec I2O RAID Driver");
#include <linux/reboot.h>
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
#include <linux/dma-mapping.h>
#include <linux/timer.h>
#include <linux/string.h>
@ -906,8 +907,8 @@ static int adpt_install_hba(struct scsi_host_template* sht, struct pci_dev* pDev
}
pci_set_master(pDev);
if (pci_set_dma_mask(pDev, 0xffffffffffffffffULL) &&
pci_set_dma_mask(pDev, 0xffffffffULL))
if (pci_set_dma_mask(pDev, DMA_64BIT_MASK) &&
pci_set_dma_mask(pDev, DMA_32BIT_MASK))
return -EINVAL;
base_addr0_phys = pci_resource_start(pDev,0);

3
drivers/scsi/eata.c
Просмотреть файл

@ -490,6 +490,7 @@
#include <linux/init.h>
#include <linux/ctype.h>
#include <linux/spinlock.h>
#include <linux/dma-mapping.h>
#include <asm/byteorder.h>
#include <asm/dma.h>
#include <asm/io.h>
@ -1426,7 +1427,7 @@ static int port_detect(unsigned long port_base, unsigned int j,
if (ha->pdev) {
pci_set_master(ha->pdev);
if (pci_set_dma_mask(ha->pdev, 0xffffffff))
if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK))
printk("%s: warning, pci_set_dma_mask failed.\n",
ha->board_name);
}

7
drivers/scsi/gdth.c
Просмотреть файл

@ -388,6 +388,7 @@
#include <linux/proc_fs.h>
#include <linux/time.h>
#include <linux/timer.h>
#include <linux/dma-mapping.h>
#ifdef GDTH_RTC
#include <linux/mc146818rtc.h>
#endif
@ -4527,15 +4528,15 @@ static int __init gdth_detect(struct scsi_host_template *shtp)
if (!(ha->cache_feat & ha->raw_feat & ha->screen_feat &GDT_64BIT)||
/* 64-bit DMA only supported from FW >= x.43 */
(!ha->dma64_support)) {
if (pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffff)) {
if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "GDT-PCI %d: Unable to set 32-bit DMA\n", hanum);
err = TRUE;
}
} else {
shp->max_cmd_len = 16;
if (!pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffffffffffffULL)) {
if (!pci_set_dma_mask(pcistr[ctr].pdev, DMA_64BIT_MASK)) {
printk("GDT-PCI %d: 64-bit DMA enabled\n", hanum);
} else if (pci_set_dma_mask(pcistr[ctr].pdev, 0xffffffff)) {
} else if (pci_set_dma_mask(pcistr[ctr].pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "GDT-PCI %d: Unable to set 64/32-bit DMA\n", hanum);
err = TRUE;
}

3
drivers/scsi/initio.c
Просмотреть файл

@ -127,6 +127,7 @@
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <scsi/scsi.h>
@ -2780,7 +2781,7 @@ static int tul_NewReturnNumberOfAdapters(void)
if (((dRegValue & 0xFF00) >> 8) == 0xFF)
dRegValue = 0;
wBIOS = (wBIOS << 8) + ((UWORD) ((dRegValue & 0xFF00) >> 8));
if (pci_set_dma_mask(pDev, 0xffffffff)) {
if (pci_set_dma_mask(pDev, DMA_32BIT_MASK)) {
printk(KERN_WARNING
"i91u: Could not set 32 bit DMA mask\n");
continue;

5
drivers/scsi/ips.c
Просмотреть файл

@ -179,6 +179,7 @@
#include <linux/blkdev.h>
#include <linux/types.h>
#include <linux/dma-mapping.h>
#include <scsi/sg.h>
@ -7284,10 +7285,10 @@ ips_init_phase1(struct pci_dev *pci_dev, int *indexPtr)
* are guaranteed to be < 4G.
*/
if (IPS_ENABLE_DMA64 && IPS_HAS_ENH_SGLIST(ha) &&
!pci_set_dma_mask(ha->pcidev, 0xffffffffffffffffULL)) {
!pci_set_dma_mask(ha->pcidev, DMA_64BIT_MASK)) {
(ha)->flags |= IPS_HA_ENH_SG;
} else {
if (pci_set_dma_mask(ha->pcidev, 0xffffffffULL) != 0) {
if (pci_set_dma_mask(ha->pcidev, DMA_32BIT_MASK) != 0) {
printk(KERN_WARNING "Unable to set DMA Mask\n");
return ips_abort_init(ha, index);
}

7
drivers/scsi/megaraid.c
Просмотреть файл

@ -45,6 +45,7 @@
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <scsi/scsicam.h>
#include "scsi.h"
@ -2094,7 +2095,7 @@ make_local_pdev(adapter_t *adapter, struct pci_dev **pdev)
memcpy(*pdev, adapter->dev, sizeof(struct pci_dev));
if( pci_set_dma_mask(*pdev, 0xffffffff) != 0 ) {
if( pci_set_dma_mask(*pdev, DMA_32BIT_MASK) != 0 ) {
kfree(*pdev);
return -1;
}
@ -4859,10 +4860,10 @@ megaraid_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
/* Set the Mode of addressing to 64 bit if we can */
if ((adapter->flag & BOARD_64BIT) && (sizeof(dma_addr_t) == 8)) {
pci_set_dma_mask(pdev, 0xffffffffffffffffULL);
pci_set_dma_mask(pdev, DMA_64BIT_MASK);
adapter->has_64bit_addr = 1;
} else {
pci_set_dma_mask(pdev, 0xffffffff);
pci_set_dma_mask(pdev, DMA_32BIT_MASK);
adapter->has_64bit_addr = 0;
}

3
drivers/scsi/nsp32.c
Просмотреть файл

@ -38,6 +38,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ctype.h>
#include <linux/dma-mapping.h>
#include <asm/dma.h>
#include <asm/system.h>
@ -2776,7 +2777,7 @@ static int nsp32_detect(struct scsi_host_template *sht)
/*
* setup DMA
*/
if (pci_set_dma_mask(PCIDEV, 0xffffffffUL) != 0) {
if (pci_set_dma_mask(PCIDEV, DMA_32BIT_MASK) != 0) {
nsp32_msg (KERN_ERR, "failed to set PCI DMA mask");
goto scsi_unregister;
}

5
drivers/scsi/qla1280.c
Просмотреть файл

@ -350,6 +350,7 @@
#include <linux/pci_ids.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/irq.h>
@ -4321,7 +4322,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
#ifdef QLA_64BIT_PTR
if (pci_set_dma_mask(ha->pdev, (dma_addr_t) ~ 0ULL)) {
if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "scsi(%li): Unable to set a "
"suitable DMA mask - aborting\n", ha->host_no);
error = -ENODEV;
@ -4331,7 +4332,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
dprintk(2, "scsi(%li): 64 Bit PCI Addressing Enabled\n",
ha->host_no);
#else
if (pci_set_dma_mask(ha->pdev, 0xffffffff)) {
if (pci_set_dma_mask(ha->pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "scsi(%li): Unable to set a "
"suitable DMA mask - aborting\n", ha->host_no);
error = -ENODEV;

5
drivers/scsi/qlogicfc.c
Просмотреть файл

@ -61,6 +61,7 @@
#include <linux/unistd.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/jiffies.h>
#include <asm/io.h>
#include <asm/irq.h>
@ -738,8 +739,8 @@ static int isp2x00_detect(struct scsi_host_template * tmpt)
continue;
/* Try to configure DMA attributes. */
if (pci_set_dma_mask(pdev, 0xffffffffffffffffULL) &&
pci_set_dma_mask(pdev, 0xffffffffULL))
if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
pci_set_dma_mask(pdev, DMA_32BIT_MASK))
continue;
host = scsi_register(tmpt, sizeof(struct isp2x00_hostdata));

1
include/linux/dma-mapping.h
Просмотреть файл

@ -21,6 +21,7 @@ enum dma_data_direction {
#define DMA_30BIT_MASK 0x000000003fffffffULL
#define DMA_29BIT_MASK 0x000000001fffffffULL
#define DMA_28BIT_MASK 0x000000000fffffffULL
#define DMA_24BIT_MASK 0x0000000000ffffffULL
#include <asm/dma-mapping.h>

2
sound/oss/esssolo1.c
Просмотреть файл

@ -2348,7 +2348,7 @@ static int __devinit solo1_probe(struct pci_dev *pcidev, const struct pci_device
/* Recording requires 24-bit DMA, so attempt to set dma mask
* to 24 bits first, then 32 bits (playback only) if that fails.
*/
if (pci_set_dma_mask(pcidev, 0x00ffffff) &&
if (pci_set_dma_mask(pcidev, DMA_24BIT_MASK) &&
pci_set_dma_mask(pcidev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "solo1: architecture does not support 24bit or 32bit PCI busmaster DMA\n");
return -ENODEV;

3
sound/oss/sonicvibes.c
Просмотреть файл

@ -116,6 +116,7 @@
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
#include <linux/gameport.h>
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
@ -2535,7 +2536,7 @@ static int __devinit sv_probe(struct pci_dev *pcidev, const struct pci_device_id
return -ENODEV;
if (pcidev->irq == 0)
return -ENODEV;
if (pci_set_dma_mask(pcidev, 0x00ffffff)) {
if (pci_set_dma_mask(pcidev, DMA_24BIT_MASK)) {
printk(KERN_WARNING "sonicvibes: architecture does not support 24bit PCI busmaster DMA\n");
return -ENODEV;
}

1
sound/pci/ad1889.c
Просмотреть файл

@ -39,6 +39,7 @@
#include <linux/interrupt.h>
#include <linux/compiler.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <sound/driver.h>
#include <sound/core.h>

5
sound/pci/ali5451/ali5451.c
Просмотреть файл

@ -33,6 +33,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/info.h>
@ -2220,8 +2221,8 @@ static int __devinit snd_ali_create(struct snd_card *card,
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 31 bits */
if (pci_set_dma_mask(pci, 0x7fffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x7fffffff) < 0) {
if (pci_set_dma_mask(pci, DMA_31BIT_MASK) < 0 ||
pci_set_consistent_dma_mask(pci, DMA_31BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 31bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;

5
sound/pci/als4000.c
Просмотреть файл

@ -70,6 +70,7 @@
#include <linux/slab.h>
#include <linux/gameport.h>
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/rawmidi.h>
@ -688,8 +689,8 @@ static int __devinit snd_card_als4000_probe(struct pci_dev *pci,
return err;
}
/* check, if we can restrict PCI DMA transfers to 24 bits */
if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;

5
sound/pci/azt3328.c
Просмотреть файл

@ -104,6 +104,7 @@
#include <linux/slab.h>
#include <linux/gameport.h>
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/pcm.h>
@ -1669,8 +1670,8 @@ snd_azf3328_create(struct snd_card *card,
chip->irq = -1;
/* check if we can restrict PCI DMA transfers to 24 bits */
if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
err = -ENXIO;
goto out_err;

1
sound/pci/emu10k1/emu10k1x.c
Просмотреть файл

@ -36,6 +36,7 @@
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm.h>

5
sound/pci/es1938.c
Просмотреть файл

@ -55,6 +55,7 @@
#include <linux/gameport.h>
#include <linux/moduleparam.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/pcm.h>
@ -1517,8 +1518,8 @@ static int __devinit snd_es1938_create(struct snd_card *card,
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 24 bits */
if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;

1
sound/pci/es1968.c
Просмотреть файл

@ -104,6 +104,7 @@
#include <linux/slab.h>
#include <linux/gameport.h>
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
#include <sound/core.h>

2
sound/pci/ice1712/ice1712.c
Просмотреть файл

@ -56,7 +56,9 @@
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <sound/cs8427.h>
#include <sound/info.h>

1
sound/pci/maestro3.c
Просмотреть файл

@ -41,6 +41,7 @@
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>

2
sound/pci/mixart/mixart.c
Просмотреть файл

@ -28,6 +28,8 @@
#include <linux/dma-mapping.h>
#include <linux/moduleparam.h>
#include <linux/mutex.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/info.h>

1
sound/pci/pcxhr/pcxhr.c
Просмотреть файл

@ -30,6 +30,7 @@
#include <linux/delay.h>
#include <linux/moduleparam.h>
#include <linux/mutex.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/initval.h>

5
sound/pci/sonicvibes.c
Просмотреть файл

@ -30,6 +30,7 @@
#include <linux/slab.h>
#include <linux/gameport.h>
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/pcm.h>
@ -1227,8 +1228,8 @@ static int __devinit snd_sonicvibes_create(struct snd_card *card,
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 24 bits */
if (pci_set_dma_mask(pci, 0x00ffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x00ffffff) < 0) {
if (pci_set_dma_mask(pci, DMA_24BIT_MASK) < 0 ||
pci_set_consistent_dma_mask(pci, DMA_24BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;

5
sound/pci/trident/trident_main.c
Просмотреть файл

@ -35,6 +35,7 @@
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/gameport.h>
#include <linux/dma-mapping.h>
#include <sound/core.h>
#include <sound/info.h>
@ -3554,8 +3555,8 @@ int __devinit snd_trident_create(struct snd_card *card,
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 30 bits */
if (pci_set_dma_mask(pci, 0x3fffffff) < 0 ||
pci_set_consistent_dma_mask(pci, 0x3fffffff) < 0) {
if (pci_set_dma_mask(pci, DMA_30BIT_MASK) < 0 ||
pci_set_consistent_dma_mask(pci, DMA_30BIT_MASK) < 0) {
snd_printk(KERN_ERR "architecture does not support 30bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;