regulator: fan53555: Add TCS4525 DCDC support
TCS4525 main features: - 2.7V to 5.5V Input Voltage Range; - 3MHz Constant Switching Frequency; - 5A Available Load Current; - Programmable Output Voltage: 0.6V to 1.4V in 6.25mV Steps; - PFM/PWM Operation for Optimum Increased Efficiency; Signed-off-by: Joseph Chen <chenjh@rock-chips.com> [Ezequiel: Forward port] Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Link: https://lore.kernel.org/r/20210421210338.43819-3-ezequiel@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Joseph Chen
Mark Brown
Родитель
3007accc39
Коммит
914df8faa7
|
|
@ -24,6 +24,12 @@
|
|||
/* Voltage setting */
|
||||
#define FAN53555_VSEL0 0x00
|
||||
#define FAN53555_VSEL1 0x01
|
||||
|
||||
#define TCS4525_VSEL0 0x11
|
||||
#define TCS4525_VSEL1 0x10
|
||||
#define TCS4525_TIME 0x13
|
||||
#define TCS4525_COMMAND 0x14
|
||||
|
||||
/* Control register */
|
||||
#define FAN53555_CONTROL 0x02
|
||||
/* IC Type */
|
||||
|
|
@ -49,11 +55,20 @@
|
|||
|
||||
#define FAN53555_NVOLTAGES 64 /* Numbers of voltages */
|
||||
#define FAN53526_NVOLTAGES 128
|
||||
#define TCS4525_NVOLTAGES 127 /* Numbers of voltages */
|
||||
|
||||
#define TCS_VSEL_NSEL_MASK 0x7f
|
||||
#define TCS_VSEL0_MODE (1 << 7)
|
||||
#define TCS_VSEL1_MODE (1 << 6)
|
||||
|
||||
#define TCS_SLEW_SHIFT 3
|
||||
#define TCS_SLEW_MASK (0x3 < 3)
|
||||
|
||||
enum fan53555_vendor {
|
||||
FAN53526_VENDOR_FAIRCHILD = 0,
|
||||
FAN53555_VENDOR_FAIRCHILD,
|
||||
FAN53555_VENDOR_SILERGY,
|
||||
FAN53555_VENDOR_TCS,
|
||||
};
|
||||
|
||||
enum {
|
||||
|
|
@ -106,6 +121,11 @@ struct fan53555_device_info {
|
|||
unsigned int mode_mask;
|
||||
/* Sleep voltage cache */
|
||||
unsigned int sleep_vol_cache;
|
||||
/* Slew rate */
|
||||
unsigned int slew_reg;
|
||||
unsigned int slew_mask;
|
||||
unsigned int slew_shift;
|
||||
unsigned int slew_rate;
|
||||
};
|
||||
|
||||
static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
|
||||
|
|
@ -189,13 +209,37 @@ static const int slew_rates[] = {
|
|||
500,
|
||||
};
|
||||
|
||||
static const int tcs_slew_rates[] = {
|
||||
18700,
|
||||
9300,
|
||||
4600,
|
||||
2300,
|
||||
};
|
||||
|
||||
static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp)
|
||||
{
|
||||
struct fan53555_device_info *di = rdev_get_drvdata(rdev);
|
||||
int regval = -1, i;
|
||||
const int *slew_rate_t;
|
||||
int slew_rate_n;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(slew_rates); i++) {
|
||||
if (ramp <= slew_rates[i])
|
||||
switch (di->vendor) {
|
||||
case FAN53526_VENDOR_FAIRCHILD:
|
||||
case FAN53555_VENDOR_FAIRCHILD:
|
||||
case FAN53555_VENDOR_SILERGY:
|
||||
slew_rate_t = slew_rates;
|
||||
slew_rate_n = ARRAY_SIZE(slew_rates);
|
||||
break;
|
||||
case FAN53555_VENDOR_TCS:
|
||||
slew_rate_t = tcs_slew_rates;
|
||||
slew_rate_n = ARRAY_SIZE(tcs_slew_rates);
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
for (i = 0; i < slew_rate_n; i++) {
|
||||
if (ramp <= slew_rate_t[i])
|
||||
regval = i;
|
||||
else
|
||||
break;
|
||||
|
|
@ -206,8 +250,8 @@ static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp)
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
return regmap_update_bits(rdev->regmap, FAN53555_CONTROL,
|
||||
CTL_SLEW_MASK, regval << CTL_SLEW_SHIFT);
|
||||
return regmap_update_bits(rdev->regmap, di->slew_reg,
|
||||
di->slew_mask, regval << di->slew_shift);
|
||||
}
|
||||
|
||||
static const struct regulator_ops fan53555_regulator_ops = {
|
||||
|
|
@ -292,7 +336,9 @@ static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
|
|||
"Chip ID %d not supported!\n", di->chip_id);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
di->slew_reg = FAN53555_CONTROL;
|
||||
di->slew_mask = CTL_SLEW_MASK;
|
||||
di->slew_shift = CTL_SLEW_SHIFT;
|
||||
di->vsel_count = FAN53555_NVOLTAGES;
|
||||
|
||||
return 0;
|
||||
|
|
@ -312,12 +358,29 @@ static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
|
|||
"Chip ID %d not supported!\n", di->chip_id);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
di->slew_reg = FAN53555_CONTROL;
|
||||
di->slew_reg = FAN53555_CONTROL;
|
||||
di->slew_mask = CTL_SLEW_MASK;
|
||||
di->slew_shift = CTL_SLEW_SHIFT;
|
||||
di->vsel_count = FAN53555_NVOLTAGES;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int fan53555_voltages_setup_tcs(struct fan53555_device_info *di)
|
||||
{
|
||||
di->slew_reg = TCS4525_TIME;
|
||||
di->slew_mask = TCS_SLEW_MASK;
|
||||
di->slew_shift = TCS_SLEW_MASK;
|
||||
|
||||
/* Init voltage range and step */
|
||||
di->vsel_min = 600000;
|
||||
di->vsel_step = 6250;
|
||||
di->vsel_count = TCS4525_NVOLTAGES;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* For 00,01,03,05 options:
|
||||
* VOUT = 0.60V + NSELx * 10mV, from 0.60 to 1.23V.
|
||||
* For 04 option:
|
||||
|
|
@ -329,17 +392,41 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
|
|||
int ret = 0;
|
||||
|
||||
/* Setup voltage control register */
|
||||
switch (pdata->sleep_vsel_id) {
|
||||
case FAN53555_VSEL_ID_0:
|
||||
di->sleep_reg = FAN53555_VSEL0;
|
||||
di->vol_reg = FAN53555_VSEL1;
|
||||
switch (di->vendor) {
|
||||
case FAN53526_VENDOR_FAIRCHILD:
|
||||
case FAN53555_VENDOR_FAIRCHILD:
|
||||
case FAN53555_VENDOR_SILERGY:
|
||||
switch (pdata->sleep_vsel_id) {
|
||||
case FAN53555_VSEL_ID_0:
|
||||
di->sleep_reg = FAN53555_VSEL0;
|
||||
di->vol_reg = FAN53555_VSEL1;
|
||||
break;
|
||||
case FAN53555_VSEL_ID_1:
|
||||
di->sleep_reg = FAN53555_VSEL1;
|
||||
di->vol_reg = FAN53555_VSEL0;
|
||||
break;
|
||||
default:
|
||||
dev_err(di->dev, "Invalid VSEL ID!\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
break;
|
||||
case FAN53555_VSEL_ID_1:
|
||||
di->sleep_reg = FAN53555_VSEL1;
|
||||
di->vol_reg = FAN53555_VSEL0;
|
||||
case FAN53555_VENDOR_TCS:
|
||||
switch (pdata->sleep_vsel_id) {
|
||||
case FAN53555_VSEL_ID_0:
|
||||
di->sleep_reg = TCS4525_VSEL0;
|
||||
di->vol_reg = TCS4525_VSEL1;
|
||||
break;
|
||||
case FAN53555_VSEL_ID_1:
|
||||
di->sleep_reg = TCS4525_VSEL1;
|
||||
di->vol_reg = TCS4525_VSEL0;
|
||||
break;
|
||||
default:
|
||||
dev_err(di->dev, "Invalid VSEL ID!\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
dev_err(di->dev, "Invalid VSEL ID!\n");
|
||||
dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
|
@ -362,6 +449,18 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
|
|||
di->mode_reg = di->vol_reg;
|
||||
di->mode_mask = VSEL_MODE;
|
||||
break;
|
||||
case FAN53555_VENDOR_TCS:
|
||||
di->mode_reg = TCS4525_COMMAND;
|
||||
|
||||
switch (pdata->sleep_vsel_id) {
|
||||
case FAN53555_VSEL_ID_0:
|
||||
di->mode_mask = TCS_VSEL1_MODE;
|
||||
break;
|
||||
case FAN53555_VSEL_ID_1:
|
||||
di->mode_mask = TCS_VSEL0_MODE;
|
||||
break;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
|
||||
return -EINVAL;
|
||||
|
|
@ -378,6 +477,9 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
|
|||
case FAN53555_VENDOR_SILERGY:
|
||||
ret = fan53555_voltages_setup_silergy(di);
|
||||
break;
|
||||
case FAN53555_VENDOR_TCS:
|
||||
ret = fan53555_voltages_setup_tcs(di);
|
||||
break;
|
||||
default:
|
||||
dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
|
||||
return -EINVAL;
|
||||
|
|
@ -449,6 +551,9 @@ static const struct of_device_id __maybe_unused fan53555_dt_ids[] = {
|
|||
}, {
|
||||
.compatible = "silergy,syr828",
|
||||
.data = (void *)FAN53555_VENDOR_SILERGY,
|
||||
}, {
|
||||
.compatible = "tcs,tcs4525",
|
||||
.data = (void *)FAN53555_VENDOR_TCS
|
||||
},
|
||||
{ }
|
||||
};
|
||||
|
|
@ -554,6 +659,9 @@ static const struct i2c_device_id fan53555_id[] = {
|
|||
}, {
|
||||
.name = "syr828",
|
||||
.driver_data = FAN53555_VENDOR_SILERGY
|
||||
}, {
|
||||
.name = "tcs4525",
|
||||
.driver_data = FAN53555_VENDOR_TCS
|
||||
},
|
||||
{ },
|
||||
};
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче