arm64: dts: a64-olinuxino: Enable RTL8723BS WiFi

Enable RTL8723BS WiFi chip on a64-olinuxino board:
- WiFi SDIO interface is connected to MMC1
- WiFi REG_ON pin connected to gpio PL2: attach to mmc-pwrseq
- WiFi HOST_WAKE pin connected to gpio PL3

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This commit is contained in:
Jagan Teki 2017-12-04 10:23:06 +05:30 коммит произвёл Maxime Ripard
Родитель 27d7f92970
Коммит 916b68cfe4
1 изменённых файлов: 23 добавлений и 0 удалений

Просмотреть файл

@ -57,6 +57,11 @@
chosen { chosen {
stdout-path = "serial0:115200n8"; stdout-path = "serial0:115200n8";
}; };
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
}; };
&mmc0 { &mmc0 {
@ -70,6 +75,24 @@
status = "okay"; status = "okay";
}; };
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&reg_aldo2>;
vqmmc-supply = <&reg_dldo4>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
rtl8723bs: wifi@1 {
reg = <1>;
interrupt-parent = <&r_pio>;
interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
interrupt-names = "host-wake";
};
};
&r_rsb { &r_rsb {
status = "okay"; status = "okay";