Remove spaces on empty line and replace spaces with tabs.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Ladislav Michl 2018-01-17 10:44:06 +01:00 коммит произвёл Greg Kroah-Hartman
Родитель 3a92a661ab
Коммит 91809d22c8
3 изменённых файлов: 42 добавлений и 43 удалений

Просмотреть файл

@ -75,9 +75,9 @@ static void __init eisa_name_device(struct eisa_device *edev)
static char __init *decode_eisa_sig(unsigned long addr)
{
static char sig_str[EISA_SIG_LEN];
static char sig_str[EISA_SIG_LEN];
u8 sig[4];
u16 rev;
u16 rev;
int i;
for (i = 0; i < 4; i++) {
@ -96,14 +96,14 @@ static char __init *decode_eisa_sig(unsigned long addr)
if (!i && (sig[0] & 0x80))
return NULL;
}
sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
sig_str[2] = (sig[1] & 0x1f) + ('A' - 1);
rev = (sig[2] << 8) | sig[3];
sprintf(sig_str + 3, "%04X", rev);
return sig_str;
sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
sig_str[2] = (sig[1] & 0x1f) + ('A' - 1);
rev = (sig[2] << 8) | sig[3];
sprintf(sig_str + 3, "%04X", rev);
return sig_str;
}
static int eisa_bus_match(struct device *dev, struct device_driver *drv)
@ -198,7 +198,7 @@ static int __init eisa_init_device(struct eisa_root_device *root,
sig = decode_eisa_sig(sig_addr);
if (!sig)
return -1; /* No EISA device here */
memcpy(edev->id.sig, sig, EISA_SIG_LEN);
edev->slot = slot;
edev->state = inb(SLOT_ADDRESS(root, slot) + EISA_CONFIG_OFFSET)
@ -222,7 +222,7 @@ static int __init eisa_init_device(struct eisa_root_device *root,
if (is_forced_dev(enable_dev, enable_dev_count, root, edev))
edev->state = EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED;
if (is_forced_dev(disable_dev, disable_dev_count, root, edev))
edev->state = EISA_CONFIG_FORCED;
@ -275,7 +275,7 @@ static int __init eisa_request_resources(struct eisa_root_device *root,
edev->res[i].start = edev->res[i].end = 0;
continue;
}
if (slot) {
edev->res[i].name = NULL;
edev->res[i].start = SLOT_ADDRESS(root, slot)
@ -295,7 +295,7 @@ static int __init eisa_request_resources(struct eisa_root_device *root,
}
return 0;
failed:
while (--i >= 0)
release_resource(&edev->res[i]);
@ -314,7 +314,7 @@ static void __init eisa_release_resources(struct eisa_device *edev)
static int __init eisa_probe(struct eisa_root_device *root)
{
int i, c;
int i, c;
struct eisa_device *edev;
char *enabled_str;
@ -322,16 +322,16 @@ static int __init eisa_probe(struct eisa_root_device *root)
/* First try to get hold of slot 0. If there is no device
* here, simply fail, unless root->force_probe is set. */
edev = kzalloc(sizeof(*edev), GFP_KERNEL);
if (!edev) {
dev_err(root->dev, "EISA: Couldn't allocate mainboard slot\n");
return -ENOMEM;
}
if (eisa_request_resources(root, edev, 0)) {
dev_warn(root->dev,
"EISA: Cannot allocate resource for mainboard\n");
"EISA: Cannot allocate resource for mainboard\n");
kfree(edev);
if (!root->force_probe)
return -EBUSY;
@ -350,14 +350,14 @@ static int __init eisa_probe(struct eisa_root_device *root)
if (eisa_register_device(edev)) {
dev_err(&edev->dev, "EISA: Failed to register %s\n",
edev->id.sig);
edev->id.sig);
eisa_release_resources(edev);
kfree(edev);
}
force_probe:
for (c = 0, i = 1; i <= root->slots; i++) {
for (c = 0, i = 1; i <= root->slots; i++) {
edev = kzalloc(sizeof(*edev), GFP_KERNEL);
if (!edev) {
dev_err(root->dev, "EISA: Out of memory for slot %d\n",
@ -367,8 +367,8 @@ static int __init eisa_probe(struct eisa_root_device *root)
if (eisa_request_resources(root, edev, i)) {
dev_warn(root->dev,
"Cannot allocate resource for EISA slot %d\n",
i);
"Cannot allocate resource for EISA slot %d\n",
i);
kfree(edev);
continue;
}
@ -395,11 +395,11 @@ static int __init eisa_probe(struct eisa_root_device *root)
if (eisa_register_device(edev)) {
dev_err(&edev->dev, "EISA: Failed to register %s\n",
edev->id.sig);
edev->id.sig);
eisa_release_resources(edev);
kfree(edev);
}
}
}
dev_info(root->dev, "EISA: Detected %d card%s\n", c, c == 1 ? "" : "s");
return 0;
@ -422,7 +422,7 @@ int __init eisa_root_register(struct eisa_root_device *root)
* been already registered. This prevents the virtual root
* device from registering after the real one has, for
* example... */
root->eisa_root_res.name = eisa_root_res.name;
root->eisa_root_res.start = root->res->start;
root->eisa_root_res.end = root->res->end;
@ -431,7 +431,7 @@ int __init eisa_root_register(struct eisa_root_device *root)
err = request_resource(&eisa_root_res, &root->eisa_root_res);
if (err)
return err;
root->bus_nr = eisa_bus_count++;
err = eisa_probe(root);
@ -444,7 +444,7 @@ int __init eisa_root_register(struct eisa_root_device *root)
static int __init eisa_init(void)
{
int r;
r = bus_register(&eisa_bus_type);
if (r)
return r;

Просмотреть файл

@ -50,11 +50,11 @@ static int __init pci_eisa_init(struct pci_dev *pdev)
return -1;
}
pci_eisa_root.dev = &pdev->dev;
pci_eisa_root.res = bus_res;
pci_eisa_root.bus_base_addr = bus_res->start;
pci_eisa_root.slots = EISA_MAX_SLOTS;
pci_eisa_root.dma_mask = pdev->dma_mask;
pci_eisa_root.dev = &pdev->dev;
pci_eisa_root.res = bus_res;
pci_eisa_root.bus_base_addr = bus_res->start;
pci_eisa_root.slots = EISA_MAX_SLOTS;
pci_eisa_root.dma_mask = pdev->dma_mask;
dev_set_drvdata(pci_eisa_root.dev, &pci_eisa_root);
if (eisa_root_register (&pci_eisa_root)) {

Просмотреть файл

@ -35,11 +35,11 @@ static struct platform_device eisa_root_dev = {
};
static struct eisa_root_device eisa_bus_root = {
.dev = &eisa_root_dev.dev,
.bus_base_addr = 0,
.res = &ioport_resource,
.slots = EISA_MAX_SLOTS,
.dma_mask = 0xffffffff,
.dev = &eisa_root_dev.dev,
.bus_base_addr = 0,
.res = &ioport_resource,
.slots = EISA_MAX_SLOTS,
.dma_mask = 0xffffffff,
};
static void virtual_eisa_release (struct device *dev)
@ -50,13 +50,12 @@ static void virtual_eisa_release (struct device *dev)
static int __init virtual_eisa_root_init (void)
{
int r;
if ((r = platform_device_register (&eisa_root_dev))) {
return r;
}
if ((r = platform_device_register (&eisa_root_dev)))
return r;
eisa_bus_root.force_probe = force_probe;
dev_set_drvdata(&eisa_root_dev.dev, &eisa_bus_root);
if (eisa_root_register (&eisa_bus_root)) {