omap3: Add i2c eeprom driver to read EDID on IGEP v2

Add i2c eeprom driver to access monitor EDID binary information
from user space, something that is required by 'decode-edid' and
'parse-edid'.

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/board-igep0020.c

@@ -542,7 +542,7 @@ static struct twl4030_platform_data igep2_twldata = {
 
 };
 
-static struct i2c_board_info __initdata igep2_i2c_boardinfo[] = {
+static struct i2c_board_info __initdata igep2_i2c1_boardinfo[] = {
 	{
 		I2C_BOARD_INFO("twl4030", 0x48),
 		.flags		= I2C_CLIENT_WAKE,
@@ -551,14 +551,29 @@ static struct i2c_board_info __initdata igep2_i2c_boardinfo[] = {
 	},
 };
 
-static int __init igep2_i2c_init(void)
+static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("eeprom", 0x50),
+	},
+};
+
+static void __init igep2_i2c_init(void)
 {
-	omap_register_i2c_bus(1, 2600, igep2_i2c_boardinfo,
-			ARRAY_SIZE(igep2_i2c_boardinfo));
-	/* Bus 3 is attached to the DVI port where devices like the pico DLP
-	 * projector don't work reliably with 400kHz */
-	omap_register_i2c_bus(3, 100, NULL, 0);
-	return 0;
+	int ret;
+
+	ret = omap_register_i2c_bus(1, 2600, igep2_i2c1_boardinfo,
+		ARRAY_SIZE(igep2_i2c1_boardinfo));
+	if (ret)
+		pr_warning("IGEP2: Could not register I2C1 bus (%d)\n", ret);
+
+	/*
+	 * Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz
+	 */
+	ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo,
+		ARRAY_SIZE(igep2_i2c3_boardinfo));
+	if (ret)
+		pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
 }
 
 static struct omap_musb_board_data musb_board_data = {
@@ -636,7 +651,7 @@ static void __init igep2_init(void)
 
 	/* Get IGEP2 hardware revision */
 	igep2_get_revision();
-
+	/* Register I2C busses and drivers */
 	igep2_i2c_init();
 	platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices));
 	omap_serial_init();