Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (92 commits) gianfar: Revive VLAN support vlan: Export symbols as non GPL symbols. bnx2x: tx_has_work should not wait for FW netxen: reduce memory footprint netxen: fix vlan tso/checksum offload net: Fix linux/if_frad.h's suitability for userspace. net: Move config NET_NS to from net/Kconfig to init/Kconfig isdn: Fix missing ifdef in isdn_ppp networking: document "nc" in addition to "netcat" in netconsole.txt e1000e: workaround hw errata af_key: initialize xfrm encap_oa virtio_net: Fix MAX_PACKET_LEN to support 802.1Q VLANs lcs: fix compilation for !CONFIG_IP_MULTICAST rtl8187: Add termination packet to prevent stall iwlwifi: fix rs_get_rate WARN_ON() p54usb: fix packet loss with first generation devices sctp: Fix another socket race during accept/peeloff sctp: Properly timestamp outgoing data chunks for rtx purposes sctp: Correctly start rtx timer on new packet transmissions. sctp: Fix crc32c calculations on big-endian arhes. ...
This commit is contained in:
Коммит
924d26df6b
|
@ -51,7 +51,8 @@ Built-in netconsole starts immediately after the TCP stack is
|
|||
initialized and attempts to bring up the supplied dev at the supplied
|
||||
address.
|
||||
|
||||
The remote host can run either 'netcat -u -l -p <port>' or syslogd.
|
||||
The remote host can run either 'netcat -u -l -p <port>',
|
||||
'nc -l -u <port>' or syslogd.
|
||||
|
||||
Dynamic reconfiguration:
|
||||
========================
|
||||
|
|
|
@ -431,6 +431,7 @@ set_arg(void __user *b, void *val,int len)
|
|||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_IPPP_FILTER
|
||||
static int get_filter(void __user *arg, struct sock_filter **p)
|
||||
{
|
||||
struct sock_fprog uprog;
|
||||
|
@ -465,6 +466,7 @@ static int get_filter(void __user *arg, struct sock_filter **p)
|
|||
*p = code;
|
||||
return uprog.len;
|
||||
}
|
||||
#endif /* CONFIG_IPPP_FILTER */
|
||||
|
||||
/*
|
||||
* ippp device ioctl
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
/* bnx2x.h: Broadcom Everest network driver.
|
||||
*
|
||||
* Copyright (c) 2007-2008 Broadcom Corporation
|
||||
* Copyright (c) 2007-2009 Broadcom Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
|
@ -271,14 +271,7 @@ struct bnx2x_fastpath {
|
|||
|
||||
#define bnx2x_fp(bp, nr, var) (bp->fp[nr].var)
|
||||
|
||||
#define BNX2X_HAS_TX_WORK(fp) \
|
||||
((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) || \
|
||||
(fp->tx_pkt_prod != fp->tx_pkt_cons))
|
||||
|
||||
#define BNX2X_HAS_RX_WORK(fp) \
|
||||
(fp->rx_comp_cons != rx_cons_sb)
|
||||
|
||||
#define BNX2X_HAS_WORK(fp) (BNX2X_HAS_RX_WORK(fp) || BNX2X_HAS_TX_WORK(fp))
|
||||
#define BNX2X_HAS_WORK(fp) (bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))
|
||||
|
||||
|
||||
/* MC hsi */
|
||||
|
|
|
@ -1,4 +1,4 @@
|
|||
/* Copyright 2008 Broadcom Corporation
|
||||
/* Copyright 2008-2009 Broadcom Corporation
|
||||
*
|
||||
* Unless you and Broadcom execute a separate written software license
|
||||
* agreement governing use of this software, this software is licensed to you
|
||||
|
@ -317,6 +317,9 @@ static u8 bnx2x_emac_enable(struct link_params *params,
|
|||
val &= ~0x810;
|
||||
EMAC_WR(bp, EMAC_REG_EMAC_MODE, val);
|
||||
|
||||
/* enable emac */
|
||||
REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1);
|
||||
|
||||
/* enable emac for jumbo packets */
|
||||
EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE,
|
||||
(EMAC_RX_MTU_SIZE_JUMBO_ENA |
|
||||
|
@ -1609,7 +1612,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
|
|||
u32 gp_status)
|
||||
{
|
||||
struct bnx2x *bp = params->bp;
|
||||
|
||||
u16 new_line_speed;
|
||||
u8 rc = 0;
|
||||
vars->link_status = 0;
|
||||
|
||||
|
@ -1629,7 +1632,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
|
|||
|
||||
switch (gp_status & GP_STATUS_SPEED_MASK) {
|
||||
case GP_STATUS_10M:
|
||||
vars->line_speed = SPEED_10;
|
||||
new_line_speed = SPEED_10;
|
||||
if (vars->duplex == DUPLEX_FULL)
|
||||
vars->link_status |= LINK_10TFD;
|
||||
else
|
||||
|
@ -1637,7 +1640,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
|
|||
break;
|
||||
|
||||
case GP_STATUS_100M:
|
||||
vars->line_speed = SPEED_100;
|
||||
new_line_speed = SPEED_100;
|
||||
if (vars->duplex == DUPLEX_FULL)
|
||||
vars->link_status |= LINK_100TXFD;
|
||||
else
|
||||
|
@ -1646,7 +1649,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
|
|||
|
||||
case GP_STATUS_1G:
|
||||
case GP_STATUS_1G_KX:
|
||||
vars->line_speed = SPEED_1000;
|
||||
new_line_speed = SPEED_1000;
|
||||
if (vars->duplex == DUPLEX_FULL)
|
||||
vars->link_status |= LINK_1000TFD;
|
||||
else
|
||||
|
@ -1654,7 +1657,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
|
|||
break;
|
||||
|
||||
case GP_STATUS_2_5G:
|
||||
vars->line_speed = SPEED_2500;
|
||||
new_line_speed = SPEED_2500;
|
||||
if (vars->duplex == DUPLEX_FULL)
|
||||
vars->link_status |= LINK_2500TFD;
|
||||
else
|
||||
|
@ -1671,32 +1674,32 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
|
|||
case GP_STATUS_10G_KX4:
|
||||
case GP_STATUS_10G_HIG:
|
||||
case GP_STATUS_10G_CX4:
|
||||
vars->line_speed = SPEED_10000;
|
||||
new_line_speed = SPEED_10000;
|
||||
vars->link_status |= LINK_10GTFD;
|
||||
break;
|
||||
|
||||
case GP_STATUS_12G_HIG:
|
||||
vars->line_speed = SPEED_12000;
|
||||
new_line_speed = SPEED_12000;
|
||||
vars->link_status |= LINK_12GTFD;
|
||||
break;
|
||||
|
||||
case GP_STATUS_12_5G:
|
||||
vars->line_speed = SPEED_12500;
|
||||
new_line_speed = SPEED_12500;
|
||||
vars->link_status |= LINK_12_5GTFD;
|
||||
break;
|
||||
|
||||
case GP_STATUS_13G:
|
||||
vars->line_speed = SPEED_13000;
|
||||
new_line_speed = SPEED_13000;
|
||||
vars->link_status |= LINK_13GTFD;
|
||||
break;
|
||||
|
||||
case GP_STATUS_15G:
|
||||
vars->line_speed = SPEED_15000;
|
||||
new_line_speed = SPEED_15000;
|
||||
vars->link_status |= LINK_15GTFD;
|
||||
break;
|
||||
|
||||
case GP_STATUS_16G:
|
||||
vars->line_speed = SPEED_16000;
|
||||
new_line_speed = SPEED_16000;
|
||||
vars->link_status |= LINK_16GTFD;
|
||||
break;
|
||||
|
||||
|
@ -1708,6 +1711,15 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
|
|||
break;
|
||||
}
|
||||
|
||||
/* Upon link speed change set the NIG into drain mode.
|
||||
Comes to deals with possible FIFO glitch due to clk change
|
||||
when speed is decreased without link down indicator */
|
||||
if (new_line_speed != vars->line_speed) {
|
||||
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE
|
||||
+ params->port*4, 0);
|
||||
msleep(1);
|
||||
}
|
||||
vars->line_speed = new_line_speed;
|
||||
vars->link_status |= LINK_STATUS_SERDES_LINK;
|
||||
|
||||
if ((params->req_line_speed == SPEED_AUTO_NEG) &&
|
||||
|
@ -3571,7 +3583,7 @@ static void bnx2x_set_xgxs_loopback(struct link_params *params,
|
|||
(MDIO_REG_BANK_CL73_IEEEB0 +
|
||||
(MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)),
|
||||
0x6041);
|
||||
|
||||
msleep(200);
|
||||
/* set aer mmd back */
|
||||
bnx2x_set_aer_mmd(params, vars);
|
||||
|
||||
|
@ -3870,9 +3882,15 @@ static u8 bnx2x_link_initialize(struct link_params *params,
|
|||
}
|
||||
|
||||
if (vars->phy_flags & PHY_XGXS_FLAG) {
|
||||
if (params->req_line_speed &&
|
||||
if ((params->req_line_speed &&
|
||||
((params->req_line_speed == SPEED_100) ||
|
||||
(params->req_line_speed == SPEED_10))) {
|
||||
(params->req_line_speed == SPEED_10))) ||
|
||||
(!params->req_line_speed &&
|
||||
(params->speed_cap_mask >=
|
||||
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) &&
|
||||
(params->speed_cap_mask <
|
||||
PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
|
||||
)) {
|
||||
vars->phy_flags |= PHY_SGMII_FLAG;
|
||||
} else {
|
||||
vars->phy_flags &= ~PHY_SGMII_FLAG;
|
||||
|
@ -4194,6 +4212,11 @@ static u8 bnx2x_update_link_down(struct link_params *params,
|
|||
/* activate nig drain */
|
||||
REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1);
|
||||
|
||||
/* disable emac */
|
||||
REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
|
||||
|
||||
msleep(10);
|
||||
|
||||
/* reset BigMac */
|
||||
bnx2x_bmac_rx_disable(bp, params->port);
|
||||
REG_WR(bp, GRCBASE_MISC +
|
||||
|
@ -4238,6 +4261,7 @@ static u8 bnx2x_update_link_up(struct link_params *params,
|
|||
|
||||
/* update shared memory */
|
||||
bnx2x_update_mng(params, vars->link_status);
|
||||
msleep(20);
|
||||
return rc;
|
||||
}
|
||||
/* This function should called upon link interrupt */
|
||||
|
@ -4276,6 +4300,9 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars)
|
|||
REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68),
|
||||
REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68));
|
||||
|
||||
/* disable emac */
|
||||
REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
|
||||
|
||||
ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
|
||||
|
||||
/* Check external link change only for non-direct */
|
||||
|
@ -4377,10 +4404,11 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base)
|
|||
ext_phy_addr[port],
|
||||
MDIO_PMA_DEVAD,
|
||||
MDIO_PMA_REG_ROM_VER1, &fw_ver1);
|
||||
if (fw_ver1 == 0) {
|
||||
if (fw_ver1 == 0 || fw_ver1 == 0x4321) {
|
||||
DP(NETIF_MSG_LINK,
|
||||
"bnx2x_8073_common_init_phy port %x "
|
||||
"fw Download failed\n", port);
|
||||
"bnx2x_8073_common_init_phy port %x:"
|
||||
"Download failed. fw version = 0x%x\n",
|
||||
port, fw_ver1);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
/* bnx2x_main.c: Broadcom Everest network driver.
|
||||
*
|
||||
* Copyright (c) 2007-2008 Broadcom Corporation
|
||||
* Copyright (c) 2007-2009 Broadcom Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
|
@ -57,8 +57,8 @@
|
|||
#include "bnx2x.h"
|
||||
#include "bnx2x_init.h"
|
||||
|
||||
#define DRV_MODULE_VERSION "1.45.23"
|
||||
#define DRV_MODULE_RELDATE "2008/11/03"
|
||||
#define DRV_MODULE_VERSION "1.45.26"
|
||||
#define DRV_MODULE_RELDATE "2009/01/26"
|
||||
#define BNX2X_BC_VER 0x040200
|
||||
|
||||
/* Time in jiffies before concluding the transmitter is hung */
|
||||
|
@ -69,7 +69,7 @@ static char version[] __devinitdata =
|
|||
DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
|
||||
|
||||
MODULE_AUTHOR("Eliezer Tamir");
|
||||
MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
|
||||
MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710/57711/57711E Driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_VERSION(DRV_MODULE_VERSION);
|
||||
|
||||
|
@ -733,6 +733,24 @@ static u16 bnx2x_ack_int(struct bnx2x *bp)
|
|||
* fast path service functions
|
||||
*/
|
||||
|
||||
static inline int bnx2x_has_tx_work(struct bnx2x_fastpath *fp)
|
||||
{
|
||||
u16 tx_cons_sb;
|
||||
|
||||
/* Tell compiler that status block fields can change */
|
||||
barrier();
|
||||
tx_cons_sb = le16_to_cpu(*fp->tx_cons_sb);
|
||||
return (fp->tx_pkt_cons != tx_cons_sb);
|
||||
}
|
||||
|
||||
static inline int bnx2x_has_tx_work_unload(struct bnx2x_fastpath *fp)
|
||||
{
|
||||
/* Tell compiler that consumer and producer can change */
|
||||
barrier();
|
||||
return (fp->tx_pkt_prod != fp->tx_pkt_cons);
|
||||
|
||||
}
|
||||
|
||||
/* free skb in the packet ring at pos idx
|
||||
* return idx of last bd freed
|
||||
*/
|
||||
|
@ -5137,12 +5155,21 @@ static void enable_blocks_attention(struct bnx2x *bp)
|
|||
}
|
||||
|
||||
|
||||
static void bnx2x_reset_common(struct bnx2x *bp)
|
||||
{
|
||||
/* reset_common */
|
||||
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
|
||||
0xd3ffff7f);
|
||||
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403);
|
||||
}
|
||||
|
||||
static int bnx2x_init_common(struct bnx2x *bp)
|
||||
{
|
||||
u32 val, i;
|
||||
|
||||
DP(BNX2X_MSG_MCP, "starting common init func %d\n", BP_FUNC(bp));
|
||||
|
||||
bnx2x_reset_common(bp);
|
||||
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
|
||||
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc);
|
||||
|
||||
|
@ -6123,8 +6150,8 @@ static void bnx2x_netif_start(struct bnx2x *bp)
|
|||
static void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
|
||||
{
|
||||
bnx2x_int_disable_sync(bp, disable_hw);
|
||||
bnx2x_napi_disable(bp);
|
||||
if (netif_running(bp->dev)) {
|
||||
bnx2x_napi_disable(bp);
|
||||
netif_tx_disable(bp->dev);
|
||||
bp->dev->trans_start = jiffies; /* prevent tx timeout */
|
||||
}
|
||||
|
@ -6144,7 +6171,7 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp, int set)
|
|||
* multicast 64-127:port0 128-191:port1
|
||||
*/
|
||||
config->hdr.length_6b = 2;
|
||||
config->hdr.offset = port ? 31 : 0;
|
||||
config->hdr.offset = port ? 32 : 0;
|
||||
config->hdr.client_id = BP_CL_ID(bp);
|
||||
config->hdr.reserved1 = 0;
|
||||
|
||||
|
@ -6308,7 +6335,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev);
|
|||
static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
|
||||
{
|
||||
u32 load_code;
|
||||
int i, rc;
|
||||
int i, rc = 0;
|
||||
#ifdef BNX2X_STOP_ON_ERROR
|
||||
if (unlikely(bp->panic))
|
||||
return -EPERM;
|
||||
|
@ -6316,6 +6343,77 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
|
|||
|
||||
bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD;
|
||||
|
||||
if (use_inta) {
|
||||
bp->num_queues = 1;
|
||||
|
||||
} else {
|
||||
if ((use_multi > 1) && (use_multi <= BP_MAX_QUEUES(bp)))
|
||||
/* user requested number */
|
||||
bp->num_queues = use_multi;
|
||||
|
||||
else if (use_multi)
|
||||
bp->num_queues = min_t(u32, num_online_cpus(),
|
||||
BP_MAX_QUEUES(bp));
|
||||
else
|
||||
bp->num_queues = 1;
|
||||
|
||||
DP(NETIF_MSG_IFUP,
|
||||
"set number of queues to %d\n", bp->num_queues);
|
||||
|
||||
/* if we can't use MSI-X we only need one fp,
|
||||
* so try to enable MSI-X with the requested number of fp's
|
||||
* and fallback to MSI or legacy INTx with one fp
|
||||
*/
|
||||
rc = bnx2x_enable_msix(bp);
|
||||
if (rc) {
|
||||
/* failed to enable MSI-X */
|
||||
bp->num_queues = 1;
|
||||
if (use_multi)
|
||||
BNX2X_ERR("Multi requested but failed"
|
||||
" to enable MSI-X\n");
|
||||
}
|
||||
}
|
||||
|
||||
if (bnx2x_alloc_mem(bp))
|
||||
return -ENOMEM;
|
||||
|
||||
for_each_queue(bp, i)
|
||||
bnx2x_fp(bp, i, disable_tpa) =
|
||||
((bp->flags & TPA_ENABLE_FLAG) == 0);
|
||||
|
||||
for_each_queue(bp, i)
|
||||
netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
|
||||
bnx2x_poll, 128);
|
||||
|
||||
#ifdef BNX2X_STOP_ON_ERROR
|
||||
for_each_queue(bp, i) {
|
||||
struct bnx2x_fastpath *fp = &bp->fp[i];
|
||||
|
||||
fp->poll_no_work = 0;
|
||||
fp->poll_calls = 0;
|
||||
fp->poll_max_calls = 0;
|
||||
fp->poll_complete = 0;
|
||||
fp->poll_exit = 0;
|
||||
}
|
||||
#endif
|
||||
bnx2x_napi_enable(bp);
|
||||
|
||||
if (bp->flags & USING_MSIX_FLAG) {
|
||||
rc = bnx2x_req_msix_irqs(bp);
|
||||
if (rc) {
|
||||
pci_disable_msix(bp->pdev);
|
||||
goto load_error1;
|
||||
}
|
||||
printk(KERN_INFO PFX "%s: using MSI-X\n", bp->dev->name);
|
||||
} else {
|
||||
bnx2x_ack_int(bp);
|
||||
rc = bnx2x_req_irq(bp);
|
||||
if (rc) {
|
||||
BNX2X_ERR("IRQ request failed rc %d, aborting\n", rc);
|
||||
goto load_error1;
|
||||
}
|
||||
}
|
||||
|
||||
/* Send LOAD_REQUEST command to MCP
|
||||
Returns the type of LOAD command:
|
||||
if it is the first port to be initialized
|
||||
|
@ -6325,10 +6423,13 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
|
|||
load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ);
|
||||
if (!load_code) {
|
||||
BNX2X_ERR("MCP response failure, aborting\n");
|
||||
return -EBUSY;
|
||||
rc = -EBUSY;
|
||||
goto load_error2;
|
||||
}
|
||||
if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) {
|
||||
rc = -EBUSY; /* other port in diagnostic mode */
|
||||
goto load_error2;
|
||||
}
|
||||
if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED)
|
||||
return -EBUSY; /* other port in diagnostic mode */
|
||||
|
||||
} else {
|
||||
int port = BP_PORT(bp);
|
||||
|
@ -6354,66 +6455,11 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
|
|||
bp->port.pmf = 0;
|
||||
DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf);
|
||||
|
||||
/* if we can't use MSI-X we only need one fp,
|
||||
* so try to enable MSI-X with the requested number of fp's
|
||||
* and fallback to inta with one fp
|
||||
*/
|
||||
if (use_inta) {
|
||||
bp->num_queues = 1;
|
||||
|
||||
} else {
|
||||
if ((use_multi > 1) && (use_multi <= BP_MAX_QUEUES(bp)))
|
||||
/* user requested number */
|
||||
bp->num_queues = use_multi;
|
||||
|
||||
else if (use_multi)
|
||||
bp->num_queues = min_t(u32, num_online_cpus(),
|
||||
BP_MAX_QUEUES(bp));
|
||||
else
|
||||
bp->num_queues = 1;
|
||||
|
||||
if (bnx2x_enable_msix(bp)) {
|
||||
/* failed to enable MSI-X */
|
||||
bp->num_queues = 1;
|
||||
if (use_multi)
|
||||
BNX2X_ERR("Multi requested but failed"
|
||||
" to enable MSI-X\n");
|
||||
}
|
||||
}
|
||||
DP(NETIF_MSG_IFUP,
|
||||
"set number of queues to %d\n", bp->num_queues);
|
||||
|
||||
if (bnx2x_alloc_mem(bp))
|
||||
return -ENOMEM;
|
||||
|
||||
for_each_queue(bp, i)
|
||||
bnx2x_fp(bp, i, disable_tpa) =
|
||||
((bp->flags & TPA_ENABLE_FLAG) == 0);
|
||||
|
||||
if (bp->flags & USING_MSIX_FLAG) {
|
||||
rc = bnx2x_req_msix_irqs(bp);
|
||||
if (rc) {
|
||||
pci_disable_msix(bp->pdev);
|
||||
goto load_error;
|
||||
}
|
||||
} else {
|
||||
bnx2x_ack_int(bp);
|
||||
rc = bnx2x_req_irq(bp);
|
||||
if (rc) {
|
||||
BNX2X_ERR("IRQ request failed, aborting\n");
|
||||
goto load_error;
|
||||
}
|
||||
}
|
||||
|
||||
for_each_queue(bp, i)
|
||||
netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
|
||||
bnx2x_poll, 128);
|
||||
|
||||
/* Initialize HW */
|
||||
rc = bnx2x_init_hw(bp, load_code);
|
||||
if (rc) {
|
||||
BNX2X_ERR("HW init failed, aborting\n");
|
||||
goto load_int_disable;
|
||||
goto load_error2;
|
||||
}
|
||||
|
||||
/* Setup NIC internals and enable interrupts */
|
||||
|
@ -6425,7 +6471,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
|
|||
if (!load_code) {
|
||||
BNX2X_ERR("MCP response failure, aborting\n");
|
||||
rc = -EBUSY;
|
||||
goto load_rings_free;
|
||||
goto load_error3;
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -6434,7 +6480,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
|
|||
rc = bnx2x_setup_leading(bp);
|
||||
if (rc) {
|
||||
BNX2X_ERR("Setup leading failed!\n");
|
||||
goto load_netif_stop;
|
||||
goto load_error3;
|
||||
}
|
||||
|
||||
if (CHIP_IS_E1H(bp))
|
||||
|
@ -6447,7 +6493,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
|
|||
for_each_nondefault_queue(bp, i) {
|
||||
rc = bnx2x_setup_multi(bp, i);
|
||||
if (rc)
|
||||
goto load_netif_stop;
|
||||
goto load_error3;
|
||||
}
|
||||
|
||||
if (CHIP_IS_E1(bp))
|
||||
|
@ -6463,18 +6509,18 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
|
|||
case LOAD_NORMAL:
|
||||
/* Tx queue should be only reenabled */
|
||||
netif_wake_queue(bp->dev);
|
||||
/* Initialize the receive filter. */
|
||||
bnx2x_set_rx_mode(bp->dev);
|
||||
break;
|
||||
|
||||
case LOAD_OPEN:
|
||||
netif_start_queue(bp->dev);
|
||||
/* Initialize the receive filter. */
|
||||
bnx2x_set_rx_mode(bp->dev);
|
||||
if (bp->flags & USING_MSIX_FLAG)
|
||||
printk(KERN_INFO PFX "%s: using MSI-X\n",
|
||||
bp->dev->name);
|
||||
break;
|
||||
|
||||
case LOAD_DIAG:
|
||||
/* Initialize the receive filter. */
|
||||
bnx2x_set_rx_mode(bp->dev);
|
||||
bp->state = BNX2X_STATE_DIAG;
|
||||
break;
|
||||
|
@ -6492,20 +6538,25 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
|
|||
|
||||
return 0;
|
||||
|
||||
load_netif_stop:
|
||||
bnx2x_napi_disable(bp);
|
||||
load_rings_free:
|
||||
load_error3:
|
||||
bnx2x_int_disable_sync(bp, 1);
|
||||
if (!BP_NOMCP(bp)) {
|
||||
bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP);
|
||||
bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE);
|
||||
}
|
||||
bp->port.pmf = 0;
|
||||
/* Free SKBs, SGEs, TPA pool and driver internals */
|
||||
bnx2x_free_skbs(bp);
|
||||
for_each_queue(bp, i)
|
||||
bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
|
||||
load_int_disable:
|
||||
bnx2x_int_disable_sync(bp, 1);
|
||||
load_error2:
|
||||
/* Release IRQs */
|
||||
bnx2x_free_irq(bp);
|
||||
load_error:
|
||||
load_error1:
|
||||
bnx2x_napi_disable(bp);
|
||||
for_each_queue(bp, i)
|
||||
netif_napi_del(&bnx2x_fp(bp, i, napi));
|
||||
bnx2x_free_mem(bp);
|
||||
bp->port.pmf = 0;
|
||||
|
||||
/* TBD we really need to reset the chip
|
||||
if we want to recover from this */
|
||||
|
@ -6578,6 +6629,7 @@ static int bnx2x_stop_leading(struct bnx2x *bp)
|
|||
}
|
||||
cnt--;
|
||||
msleep(1);
|
||||
rmb(); /* Refresh the dsb_sp_prod */
|
||||
}
|
||||
bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD;
|
||||
bp->fp[0].state = BNX2X_FP_STATE_CLOSED;
|
||||
|
@ -6629,14 +6681,6 @@ static void bnx2x_reset_port(struct bnx2x *bp)
|
|||
/* TODO: Close Doorbell port? */
|
||||
}
|
||||
|
||||
static void bnx2x_reset_common(struct bnx2x *bp)
|
||||
{
|
||||
/* reset_common */
|
||||
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
|
||||
0xd3ffff7f);
|
||||
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403);
|
||||
}
|
||||
|
||||
static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
|
||||
{
|
||||
DP(BNX2X_MSG_MCP, "function %d reset_code %x\n",
|
||||
|
@ -6677,20 +6721,22 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
|
|||
bnx2x_set_storm_rx_mode(bp);
|
||||
|
||||
bnx2x_netif_stop(bp, 1);
|
||||
if (!netif_running(bp->dev))
|
||||
bnx2x_napi_disable(bp);
|
||||
|
||||
del_timer_sync(&bp->timer);
|
||||
SHMEM_WR(bp, func_mb[BP_FUNC(bp)].drv_pulse_mb,
|
||||
(DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq));
|
||||
bnx2x_stats_handle(bp, STATS_EVENT_STOP);
|
||||
|
||||
/* Release IRQs */
|
||||
bnx2x_free_irq(bp);
|
||||
|
||||
/* Wait until tx fast path tasks complete */
|
||||
for_each_queue(bp, i) {
|
||||
struct bnx2x_fastpath *fp = &bp->fp[i];
|
||||
|
||||
cnt = 1000;
|
||||
smp_rmb();
|
||||
while (BNX2X_HAS_TX_WORK(fp)) {
|
||||
while (bnx2x_has_tx_work_unload(fp)) {
|
||||
|
||||
bnx2x_tx_int(fp, 1000);
|
||||
if (!cnt) {
|
||||
|
@ -6711,9 +6757,6 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
|
|||
/* Give HW time to discard old tx messages */
|
||||
msleep(1);
|
||||
|
||||
/* Release IRQs */
|
||||
bnx2x_free_irq(bp);
|
||||
|
||||
if (CHIP_IS_E1(bp)) {
|
||||
struct mac_configuration_cmd *config =
|
||||
bnx2x_sp(bp, mcast_config);
|
||||
|
@ -6822,6 +6865,8 @@ unload_error:
|
|||
bnx2x_free_skbs(bp);
|
||||
for_each_queue(bp, i)
|
||||
bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
|
||||
for_each_queue(bp, i)
|
||||
netif_napi_del(&bnx2x_fp(bp, i, napi));
|
||||
bnx2x_free_mem(bp);
|
||||
|
||||
bp->state = BNX2X_STATE_CLOSED;
|
||||
|
@ -6874,10 +6919,6 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
|
|||
*/
|
||||
bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
|
||||
val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
|
||||
if (val == 0x7)
|
||||
REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
|
||||
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
|
||||
|
||||
if (val == 0x7) {
|
||||
u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
|
||||
/* save our func */
|
||||
|
@ -6885,6 +6926,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
|
|||
u32 swap_en;
|
||||
u32 swap_val;
|
||||
|
||||
/* clear the UNDI indication */
|
||||
REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
|
||||
|
||||
BNX2X_DEV_INFO("UNDI is active! reset device\n");
|
||||
|
||||
/* try unload UNDI on port 0 */
|
||||
|
@ -6910,6 +6954,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
|
|||
bnx2x_fw_command(bp, reset_code);
|
||||
}
|
||||
|
||||
/* now it's safe to release the lock */
|
||||
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
|
||||
|
||||
REG_WR(bp, (BP_PORT(bp) ? HC_REG_CONFIG_1 :
|
||||
HC_REG_CONFIG_0), 0x1000);
|
||||
|
||||
|
@ -6954,7 +7001,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
|
|||
bp->fw_seq =
|
||||
(SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
|
||||
DRV_MSG_SEQ_NUMBER_MASK);
|
||||
}
|
||||
|
||||
} else
|
||||
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -6971,7 +7020,7 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
|
|||
id |= ((val & 0xf) << 12);
|
||||
val = REG_RD(bp, MISC_REG_CHIP_METAL);
|
||||
id |= ((val & 0xff) << 4);
|
||||
REG_RD(bp, MISC_REG_BOND_ID);
|
||||
val = REG_RD(bp, MISC_REG_BOND_ID);
|
||||
id |= (val & 0xf);
|
||||
bp->common.chip_id = id;
|
||||
bp->link_params.chip_id = bp->common.chip_id;
|
||||
|
@ -8103,6 +8152,9 @@ static int bnx2x_get_eeprom(struct net_device *dev,
|
|||
struct bnx2x *bp = netdev_priv(dev);
|
||||
int rc;
|
||||
|
||||
if (!netif_running(dev))
|
||||
return -EAGAIN;
|
||||
|
||||
DP(BNX2X_MSG_NVM, "ethtool_eeprom: cmd %d\n"
|
||||
DP_LEVEL " magic 0x%x offset 0x%x (%d) len 0x%x (%d)\n",
|
||||
eeprom->cmd, eeprom->magic, eeprom->offset, eeprom->offset,
|
||||
|
@ -8705,18 +8757,17 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode, u8 link_up)
|
|||
|
||||
if (loopback_mode == BNX2X_MAC_LOOPBACK) {
|
||||
bp->link_params.loopback_mode = LOOPBACK_BMAC;
|
||||
bnx2x_acquire_phy_lock(bp);
|
||||
bnx2x_phy_init(&bp->link_params, &bp->link_vars);
|
||||
bnx2x_release_phy_lock(bp);
|
||||
|
||||
} else if (loopback_mode == BNX2X_PHY_LOOPBACK) {
|
||||
u16 cnt = 1000;
|
||||
bp->link_params.loopback_mode = LOOPBACK_XGXS_10;
|
||||
bnx2x_acquire_phy_lock(bp);
|
||||
bnx2x_phy_init(&bp->link_params, &bp->link_vars);
|
||||
bnx2x_release_phy_lock(bp);
|
||||
/* wait until link state is restored */
|
||||
bnx2x_wait_for_link(bp, link_up);
|
||||
|
||||
if (link_up)
|
||||
while (cnt-- && bnx2x_test_link(&bp->link_params,
|
||||
&bp->link_vars))
|
||||
msleep(10);
|
||||
} else
|
||||
return -EINVAL;
|
||||
|
||||
|
@ -8822,6 +8873,7 @@ static int bnx2x_test_loopback(struct bnx2x *bp, u8 link_up)
|
|||
return BNX2X_LOOPBACK_FAILED;
|
||||
|
||||
bnx2x_netif_stop(bp, 1);
|
||||
bnx2x_acquire_phy_lock(bp);
|
||||
|
||||
if (bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK, link_up)) {
|
||||
DP(NETIF_MSG_PROBE, "MAC loopback failed\n");
|
||||
|
@ -8833,6 +8885,7 @@ static int bnx2x_test_loopback(struct bnx2x *bp, u8 link_up)
|
|||
rc |= BNX2X_PHY_LOOPBACK_FAILED;
|
||||
}
|
||||
|
||||
bnx2x_release_phy_lock(bp);
|
||||
bnx2x_netif_start(bp);
|
||||
|
||||
return rc;
|
||||
|
@ -8906,7 +8959,10 @@ static int bnx2x_test_intr(struct bnx2x *bp)
|
|||
return -ENODEV;
|
||||
|
||||
config->hdr.length_6b = 0;
|
||||
config->hdr.offset = 0;
|
||||
if (CHIP_IS_E1(bp))
|
||||
config->hdr.offset = (BP_PORT(bp) ? 32 : 0);
|
||||
else
|
||||
config->hdr.offset = BP_FUNC(bp);
|
||||
config->hdr.client_id = BP_CL_ID(bp);
|
||||
config->hdr.reserved1 = 0;
|
||||
|
||||
|
@ -9271,6 +9327,18 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static inline int bnx2x_has_rx_work(struct bnx2x_fastpath *fp)
|
||||
{
|
||||
u16 rx_cons_sb;
|
||||
|
||||
/* Tell compiler that status block fields can change */
|
||||
barrier();
|
||||
rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
|
||||
if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
|
||||
rx_cons_sb++;
|
||||
return (fp->rx_comp_cons != rx_cons_sb);
|
||||
}
|
||||
|
||||
/*
|
||||
* net_device service functions
|
||||
*/
|
||||
|
@ -9281,7 +9349,6 @@ static int bnx2x_poll(struct napi_struct *napi, int budget)
|
|||
napi);
|
||||
struct bnx2x *bp = fp->bp;
|
||||
int work_done = 0;
|
||||
u16 rx_cons_sb;
|
||||
|
||||
#ifdef BNX2X_STOP_ON_ERROR
|
||||
if (unlikely(bp->panic))
|
||||
|
@ -9294,19 +9361,12 @@ static int bnx2x_poll(struct napi_struct *napi, int budget)
|
|||
|
||||
bnx2x_update_fpsb_idx(fp);
|
||||
|
||||
if (BNX2X_HAS_TX_WORK(fp))
|
||||
if (bnx2x_has_tx_work(fp))
|
||||
bnx2x_tx_int(fp, budget);
|
||||
|
||||
rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
|
||||
if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
|
||||
rx_cons_sb++;
|
||||
if (BNX2X_HAS_RX_WORK(fp))
|
||||
if (bnx2x_has_rx_work(fp))
|
||||
work_done = bnx2x_rx_int(fp, budget);
|
||||
|
||||
rmb(); /* BNX2X_HAS_WORK() reads the status block */
|
||||
rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
|
||||
if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
|
||||
rx_cons_sb++;
|
||||
|
||||
/* must not complete if we consumed full budget */
|
||||
if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) {
|
||||
|
@ -9417,6 +9477,7 @@ static inline u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb)
|
|||
return rc;
|
||||
}
|
||||
|
||||
#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
|
||||
/* check if packet requires linearization (packet is too fragmented) */
|
||||
static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
|
||||
u32 xmit_type)
|
||||
|
@ -9494,6 +9555,7 @@ exit_lbl:
|
|||
|
||||
return to_copy;
|
||||
}
|
||||
#endif
|
||||
|
||||
/* called with netif_tx_lock
|
||||
* bnx2x_tx_int() runs without netif_tx_lock unless it needs to call
|
||||
|
@ -9534,6 +9596,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|||
skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr,
|
||||
ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type);
|
||||
|
||||
#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3)
|
||||
/* First, check if we need to linearize the skb
|
||||
(due to FW restrictions) */
|
||||
if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) {
|
||||
|
@ -9546,6 +9609,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|||
return NETDEV_TX_OK;
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
/*
|
||||
Please read carefully. First we use one BD which we mark as start,
|
||||
|
@ -9776,6 +9840,8 @@ static int bnx2x_open(struct net_device *dev)
|
|||
{
|
||||
struct bnx2x *bp = netdev_priv(dev);
|
||||
|
||||
netif_carrier_off(dev);
|
||||
|
||||
bnx2x_set_power_state(bp, PCI_D0);
|
||||
|
||||
return bnx2x_nic_load(bp, LOAD_OPEN);
|
||||
|
@ -9859,7 +9925,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev)
|
|||
for (; i < old; i++) {
|
||||
if (CAM_IS_INVALID(config->
|
||||
config_table[i])) {
|
||||
i--; /* already invalidated */
|
||||
/* already invalidated */
|
||||
break;
|
||||
}
|
||||
/* invalidate */
|
||||
|
@ -10269,22 +10335,18 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
|
|||
return rc;
|
||||
}
|
||||
|
||||
pci_set_drvdata(pdev, dev);
|
||||
|
||||
rc = bnx2x_init_bp(bp);
|
||||
if (rc)
|
||||
goto init_one_exit;
|
||||
|
||||
rc = register_netdev(dev);
|
||||
if (rc) {
|
||||
dev_err(&pdev->dev, "Cannot register net device\n");
|
||||
goto init_one_exit;
|
||||
}
|
||||
|
||||
pci_set_drvdata(pdev, dev);
|
||||
|
||||
rc = bnx2x_init_bp(bp);
|
||||
if (rc) {
|
||||
unregister_netdev(dev);
|
||||
goto init_one_exit;
|
||||
}
|
||||
|
||||
netif_carrier_off(dev);
|
||||
|
||||
bp->common.name = board_info[ent->driver_data].name;
|
||||
printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx,"
|
||||
" IRQ %d, ", dev->name, bp->common.name,
|
||||
|
@ -10432,6 +10494,8 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
|
|||
bnx2x_free_skbs(bp);
|
||||
for_each_queue(bp, i)
|
||||
bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
|
||||
for_each_queue(bp, i)
|
||||
netif_napi_del(&bnx2x_fp(bp, i, napi));
|
||||
bnx2x_free_mem(bp);
|
||||
|
||||
bp->state = BNX2X_STATE_CLOSED;
|
||||
|
|
|
@ -1,6 +1,6 @@
|
|||
/* bnx2x_reg.h: Broadcom Everest network driver.
|
||||
*
|
||||
* Copyright (c) 2007-2008 Broadcom Corporation
|
||||
* Copyright (c) 2007-2009 Broadcom Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
|
|
|
@ -2104,6 +2104,7 @@ static void init_lro_mgr(struct sge_qset *qs, struct net_lro_mgr *lro_mgr)
|
|||
{
|
||||
lro_mgr->dev = qs->netdev;
|
||||
lro_mgr->features = LRO_F_NAPI;
|
||||
lro_mgr->frag_align_pad = NET_IP_ALIGN;
|
||||
lro_mgr->ip_summed = CHECKSUM_UNNECESSARY;
|
||||
lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
|
||||
lro_mgr->max_desc = T3_MAX_LRO_SES;
|
||||
|
|
|
@ -981,11 +981,15 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
|
|||
ew32(PBA_ECC, reg);
|
||||
}
|
||||
|
||||
/* PCI-Ex Control Register */
|
||||
/* PCI-Ex Control Registers */
|
||||
if (hw->mac.type == e1000_82574) {
|
||||
reg = er32(GCR);
|
||||
reg |= (1 << 22);
|
||||
ew32(GCR, reg);
|
||||
|
||||
reg = er32(GCR2);
|
||||
reg |= 1;
|
||||
ew32(GCR2, reg);
|
||||
}
|
||||
|
||||
return;
|
||||
|
|
|
@ -206,6 +206,7 @@ enum e1e_registers {
|
|||
E1000_MANC2H = 0x05860, /* Management Control To Host - RW */
|
||||
E1000_SW_FW_SYNC = 0x05B5C, /* Software-Firmware Synchronization - RW */
|
||||
E1000_GCR = 0x05B00, /* PCI-Ex Control */
|
||||
E1000_GCR2 = 0x05B64, /* PCI-Ex Control #2 */
|
||||
E1000_FACTPS = 0x05B30, /* Function Active and Power State to MNG */
|
||||
E1000_SWSM = 0x05B50, /* SW Semaphore */
|
||||
E1000_FWSM = 0x05B54, /* FW Semaphore */
|
||||
|
|
|
@ -1423,15 +1423,11 @@ static void gfar_vlan_rx_register(struct net_device *dev,
|
|||
{
|
||||
struct gfar_private *priv = netdev_priv(dev);
|
||||
unsigned long flags;
|
||||
struct vlan_group *old_grp;
|
||||
u32 tempval;
|
||||
|
||||
spin_lock_irqsave(&priv->rxlock, flags);
|
||||
|
||||
old_grp = priv->vlgrp;
|
||||
|
||||
if (old_grp == grp)
|
||||
return;
|
||||
priv->vlgrp = grp;
|
||||
|
||||
if (grp) {
|
||||
/* Enable VLAN tag insertion */
|
||||
|
|
|
@ -318,6 +318,9 @@ static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter,
|
|||
rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
|
||||
rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN;
|
||||
rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN;
|
||||
rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN);
|
||||
rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
|
||||
IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
|
||||
IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q), rxctrl);
|
||||
rx_ring->cpu = cpu;
|
||||
}
|
||||
|
@ -1741,38 +1744,6 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
|
|||
IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
|
||||
}
|
||||
|
||||
static void ixgbe_vlan_rx_register(struct net_device *netdev,
|
||||
struct vlan_group *grp)
|
||||
{
|
||||
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
||||
u32 ctrl;
|
||||
|
||||
if (!test_bit(__IXGBE_DOWN, &adapter->state))
|
||||
ixgbe_irq_disable(adapter);
|
||||
adapter->vlgrp = grp;
|
||||
|
||||
/*
|
||||
* For a DCB driver, always enable VLAN tag stripping so we can
|
||||
* still receive traffic from a DCB-enabled host even if we're
|
||||
* not in DCB mode.
|
||||
*/
|
||||
ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
|
||||
ctrl |= IXGBE_VLNCTRL_VME;
|
||||
ctrl &= ~IXGBE_VLNCTRL_CFIEN;
|
||||
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
|
||||
|
||||
if (grp) {
|
||||
/* enable VLAN tag insert/strip */
|
||||
ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
|
||||
ctrl |= IXGBE_VLNCTRL_VME;
|
||||
ctrl &= ~IXGBE_VLNCTRL_CFIEN;
|
||||
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
|
||||
}
|
||||
|
||||
if (!test_bit(__IXGBE_DOWN, &adapter->state))
|
||||
ixgbe_irq_enable(adapter);
|
||||
}
|
||||
|
||||
static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
|
||||
{
|
||||
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
||||
|
@ -1799,6 +1770,39 @@ static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
|
|||
hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false);
|
||||
}
|
||||
|
||||
static void ixgbe_vlan_rx_register(struct net_device *netdev,
|
||||
struct vlan_group *grp)
|
||||
{
|
||||
struct ixgbe_adapter *adapter = netdev_priv(netdev);
|
||||
u32 ctrl;
|
||||
|
||||
if (!test_bit(__IXGBE_DOWN, &adapter->state))
|
||||
ixgbe_irq_disable(adapter);
|
||||
adapter->vlgrp = grp;
|
||||
|
||||
/*
|
||||
* For a DCB driver, always enable VLAN tag stripping so we can
|
||||
* still receive traffic from a DCB-enabled host even if we're
|
||||
* not in DCB mode.
|
||||
*/
|
||||
ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
|
||||
ctrl |= IXGBE_VLNCTRL_VME;
|
||||
ctrl &= ~IXGBE_VLNCTRL_CFIEN;
|
||||
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
|
||||
ixgbe_vlan_rx_add_vid(netdev, 0);
|
||||
|
||||
if (grp) {
|
||||
/* enable VLAN tag insert/strip */
|
||||
ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
|
||||
ctrl |= IXGBE_VLNCTRL_VME;
|
||||
ctrl &= ~IXGBE_VLNCTRL_CFIEN;
|
||||
IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
|
||||
}
|
||||
|
||||
if (!test_bit(__IXGBE_DOWN, &adapter->state))
|
||||
ixgbe_irq_enable(adapter);
|
||||
}
|
||||
|
||||
static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter)
|
||||
{
|
||||
ixgbe_vlan_rx_register(adapter->netdev, adapter->vlgrp);
|
||||
|
@ -2074,6 +2078,9 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
|
|||
|
||||
ixgbe_irq_enable(adapter);
|
||||
|
||||
/* enable transmits */
|
||||
netif_tx_start_all_queues(netdev);
|
||||
|
||||
/* bring the link up in the watchdog, this could race with our first
|
||||
* link up interrupt but shouldn't be a problem */
|
||||
adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
|
||||
|
@ -3475,7 +3482,6 @@ static void ixgbe_watchdog_task(struct work_struct *work)
|
|||
(FLOW_TX ? "TX" : "None"))));
|
||||
|
||||
netif_carrier_on(netdev);
|
||||
netif_tx_wake_all_queues(netdev);
|
||||
} else {
|
||||
/* Force detection of hung controller */
|
||||
adapter->detect_tx_hung = true;
|
||||
|
@ -3487,7 +3493,6 @@ static void ixgbe_watchdog_task(struct work_struct *work)
|
|||
printk(KERN_INFO "ixgbe: %s NIC Link is Down\n",
|
||||
netdev->name);
|
||||
netif_carrier_off(netdev);
|
||||
netif_tx_stop_all_queues(netdev);
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -4218,7 +4223,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
|
|||
}
|
||||
|
||||
netif_carrier_off(netdev);
|
||||
netif_tx_stop_all_queues(netdev);
|
||||
|
||||
strcpy(netdev->name, "eth%d");
|
||||
err = register_netdev(netdev);
|
||||
|
|
|
@ -404,6 +404,9 @@
|
|||
#define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
|
||||
#define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
|
||||
#define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
|
||||
#define IXGBE_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */
|
||||
#define IXGBE_DCA_RXCTRL_DESC_WRO_EN (1 << 13) /* DCA Rx wr Desc Relax Order */
|
||||
#define IXGBE_DCA_RXCTRL_DESC_HSRO_EN (1 << 15) /* DCA Rx Split Header RO */
|
||||
|
||||
#define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
|
||||
#define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
|
||||
|
|
|
@ -416,6 +416,9 @@ static int korina_rx(struct net_device *dev, int limit)
|
|||
if (devcs & ETH_RX_MP)
|
||||
dev->stats.multicast++;
|
||||
|
||||
/* 16 bit align */
|
||||
skb_reserve(skb_new, 2);
|
||||
|
||||
lp->rx_skb[lp->rx_next_done] = skb_new;
|
||||
}
|
||||
|
||||
|
@ -740,6 +743,7 @@ static struct ethtool_ops netdev_ethtool_ops = {
|
|||
static void korina_alloc_ring(struct net_device *dev)
|
||||
{
|
||||
struct korina_private *lp = netdev_priv(dev);
|
||||
struct sk_buff *skb;
|
||||
int i;
|
||||
|
||||
/* Initialize the transmit descriptors */
|
||||
|
@ -755,8 +759,6 @@ static void korina_alloc_ring(struct net_device *dev)
|
|||
|
||||
/* Initialize the receive descriptors */
|
||||
for (i = 0; i < KORINA_NUM_RDS; i++) {
|
||||
struct sk_buff *skb = lp->rx_skb[i];
|
||||
|
||||
skb = dev_alloc_skb(KORINA_RBSIZE + 2);
|
||||
if (!skb)
|
||||
break;
|
||||
|
@ -769,11 +771,12 @@ static void korina_alloc_ring(struct net_device *dev)
|
|||
lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]);
|
||||
}
|
||||
|
||||
/* loop back */
|
||||
lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[0]);
|
||||
lp->rx_next_done = 0;
|
||||
/* loop back receive descriptors, so the last
|
||||
* descriptor points to the first one */
|
||||
lp->rd_ring[i - 1].link = CPHYSADDR(&lp->rd_ring[0]);
|
||||
lp->rd_ring[i - 1].control |= DMA_DESC_COD;
|
||||
|
||||
lp->rd_ring[i].control |= DMA_DESC_COD;
|
||||
lp->rx_next_done = 0;
|
||||
lp->rx_chain_head = 0;
|
||||
lp->rx_chain_tail = 0;
|
||||
lp->rx_chain_status = desc_empty;
|
||||
|
|
|
@ -321,6 +321,10 @@ static void macb_tx(struct macb *bp)
|
|||
printk(KERN_ERR "%s: TX underrun, resetting buffers\n",
|
||||
bp->dev->name);
|
||||
|
||||
/* Transfer ongoing, disable transmitter, to avoid confusion */
|
||||
if (status & MACB_BIT(TGO))
|
||||
macb_writel(bp, NCR, macb_readl(bp, NCR) & ~MACB_BIT(TE));
|
||||
|
||||
head = bp->tx_head;
|
||||
|
||||
/*Mark all the buffer as used to avoid sending a lost buffer*/
|
||||
|
@ -343,6 +347,10 @@ static void macb_tx(struct macb *bp)
|
|||
}
|
||||
|
||||
bp->tx_head = bp->tx_tail = 0;
|
||||
|
||||
/* Enable the transmitter again */
|
||||
if (status & MACB_BIT(TGO))
|
||||
macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TE));
|
||||
}
|
||||
|
||||
if (!(status & MACB_BIT(COMP)))
|
||||
|
|
|
@ -136,21 +136,23 @@ static char mv643xx_eth_driver_version[] = "1.4";
|
|||
/*
|
||||
* SDMA configuration register.
|
||||
*/
|
||||
#define RX_BURST_SIZE_4_64BIT (2 << 1)
|
||||
#define RX_BURST_SIZE_16_64BIT (4 << 1)
|
||||
#define BLM_RX_NO_SWAP (1 << 4)
|
||||
#define BLM_TX_NO_SWAP (1 << 5)
|
||||
#define TX_BURST_SIZE_4_64BIT (2 << 22)
|
||||
#define TX_BURST_SIZE_16_64BIT (4 << 22)
|
||||
|
||||
#if defined(__BIG_ENDIAN)
|
||||
#define PORT_SDMA_CONFIG_DEFAULT_VALUE \
|
||||
(RX_BURST_SIZE_16_64BIT | \
|
||||
TX_BURST_SIZE_16_64BIT)
|
||||
(RX_BURST_SIZE_4_64BIT | \
|
||||
TX_BURST_SIZE_4_64BIT)
|
||||
#elif defined(__LITTLE_ENDIAN)
|
||||
#define PORT_SDMA_CONFIG_DEFAULT_VALUE \
|
||||
(RX_BURST_SIZE_16_64BIT | \
|
||||
BLM_RX_NO_SWAP | \
|
||||
BLM_TX_NO_SWAP | \
|
||||
TX_BURST_SIZE_16_64BIT)
|
||||
(RX_BURST_SIZE_4_64BIT | \
|
||||
BLM_RX_NO_SWAP | \
|
||||
BLM_TX_NO_SWAP | \
|
||||
TX_BURST_SIZE_4_64BIT)
|
||||
#else
|
||||
#error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined
|
||||
#endif
|
||||
|
@ -1594,7 +1596,7 @@ oom:
|
|||
entry = addr_crc(a);
|
||||
}
|
||||
|
||||
table[entry >> 2] |= 1 << (entry & 3);
|
||||
table[entry >> 2] |= 1 << (8 * (entry & 3));
|
||||
}
|
||||
|
||||
for (i = 0; i < 0x100; i += 4) {
|
||||
|
@ -2210,6 +2212,7 @@ static int mv643xx_eth_stop(struct net_device *dev)
|
|||
struct mv643xx_eth_private *mp = netdev_priv(dev);
|
||||
int i;
|
||||
|
||||
wrlp(mp, INT_MASK_EXT, 0x00000000);
|
||||
wrlp(mp, INT_MASK, 0x00000000);
|
||||
rdlp(mp, INT_MASK);
|
||||
|
||||
|
|
|
@ -1,7 +1,7 @@
|
|||
/*************************************************************************
|
||||
* myri10ge.c: Myricom Myri-10G Ethernet driver.
|
||||
*
|
||||
* Copyright (C) 2005 - 2007 Myricom, Inc.
|
||||
* Copyright (C) 2005 - 2009 Myricom, Inc.
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
|
@ -75,7 +75,7 @@
|
|||
#include "myri10ge_mcp.h"
|
||||
#include "myri10ge_mcp_gen_header.h"
|
||||
|
||||
#define MYRI10GE_VERSION_STR "1.4.4-1.398"
|
||||
#define MYRI10GE_VERSION_STR "1.4.4-1.401"
|
||||
|
||||
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
|
||||
MODULE_AUTHOR("Maintainer: help@myri.com");
|
||||
|
@ -3786,7 +3786,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|||
if (status != 0) {
|
||||
dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n",
|
||||
status);
|
||||
goto abort_with_netdev;
|
||||
goto abort_with_enabled;
|
||||
}
|
||||
|
||||
pci_set_master(pdev);
|
||||
|
@ -3801,13 +3801,13 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|||
}
|
||||
if (status != 0) {
|
||||
dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
|
||||
goto abort_with_netdev;
|
||||
goto abort_with_enabled;
|
||||
}
|
||||
(void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
|
||||
mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
|
||||
&mgp->cmd_bus, GFP_KERNEL);
|
||||
if (mgp->cmd == NULL)
|
||||
goto abort_with_netdev;
|
||||
goto abort_with_enabled;
|
||||
|
||||
mgp->board_span = pci_resource_len(pdev, 0);
|
||||
mgp->iomem_base = pci_resource_start(pdev, 0);
|
||||
|
@ -3943,8 +3943,10 @@ abort_with_mtrr:
|
|||
dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
|
||||
mgp->cmd, mgp->cmd_bus);
|
||||
|
||||
abort_with_netdev:
|
||||
abort_with_enabled:
|
||||
pci_disable_device(pdev);
|
||||
|
||||
abort_with_netdev:
|
||||
free_netdev(netdev);
|
||||
return status;
|
||||
}
|
||||
|
@ -3990,6 +3992,7 @@ static void myri10ge_remove(struct pci_dev *pdev)
|
|||
mgp->cmd, mgp->cmd_bus);
|
||||
|
||||
free_netdev(netdev);
|
||||
pci_disable_device(pdev);
|
||||
pci_set_drvdata(pdev, NULL);
|
||||
}
|
||||
|
||||
|
|
|
@ -146,7 +146,7 @@
|
|||
|
||||
#define MAX_RX_BUFFER_LENGTH 1760
|
||||
#define MAX_RX_JUMBO_BUFFER_LENGTH 8062
|
||||
#define MAX_RX_LRO_BUFFER_LENGTH ((48*1024)-512)
|
||||
#define MAX_RX_LRO_BUFFER_LENGTH (8062)
|
||||
#define RX_DMA_MAP_LEN (MAX_RX_BUFFER_LENGTH - 2)
|
||||
#define RX_JUMBO_DMA_MAP_LEN \
|
||||
(MAX_RX_JUMBO_BUFFER_LENGTH - 2)
|
||||
|
@ -207,11 +207,11 @@
|
|||
|
||||
#define MAX_CMD_DESCRIPTORS 4096
|
||||
#define MAX_RCV_DESCRIPTORS 16384
|
||||
#define MAX_CMD_DESCRIPTORS_HOST (MAX_CMD_DESCRIPTORS / 4)
|
||||
#define MAX_RCV_DESCRIPTORS_1G (MAX_RCV_DESCRIPTORS / 4)
|
||||
#define MAX_RCV_DESCRIPTORS_10G 8192
|
||||
#define MAX_JUMBO_RCV_DESCRIPTORS 1024
|
||||
#define MAX_LRO_RCV_DESCRIPTORS 64
|
||||
#define MAX_CMD_DESCRIPTORS_HOST 1024
|
||||
#define MAX_RCV_DESCRIPTORS_1G 2048
|
||||
#define MAX_RCV_DESCRIPTORS_10G 4096
|
||||
#define MAX_JUMBO_RCV_DESCRIPTORS 512
|
||||
#define MAX_LRO_RCV_DESCRIPTORS 8
|
||||
#define MAX_RCVSTATUS_DESCRIPTORS MAX_RCV_DESCRIPTORS
|
||||
#define MAX_JUMBO_RCV_DESC MAX_JUMBO_RCV_DESCRIPTORS
|
||||
#define MAX_RCV_DESC MAX_RCV_DESCRIPTORS
|
||||
|
|
|
@ -561,7 +561,10 @@ netxen_nic_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
|
|||
}
|
||||
ring->tx_pending = adapter->max_tx_desc_count;
|
||||
|
||||
ring->rx_max_pending = MAX_RCV_DESCRIPTORS;
|
||||
if (adapter->ahw.board_type == NETXEN_NIC_GBE)
|
||||
ring->rx_max_pending = MAX_RCV_DESCRIPTORS_1G;
|
||||
else
|
||||
ring->rx_max_pending = MAX_RCV_DESCRIPTORS_10G;
|
||||
ring->tx_max_pending = MAX_CMD_DESCRIPTORS_HOST;
|
||||
ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS;
|
||||
ring->rx_mini_max_pending = 0;
|
||||
|
|
|
@ -735,17 +735,18 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|||
|
||||
SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops);
|
||||
|
||||
/* ScatterGather support */
|
||||
netdev->features = NETIF_F_SG;
|
||||
netdev->features |= NETIF_F_IP_CSUM;
|
||||
netdev->features |= NETIF_F_TSO;
|
||||
netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
|
||||
netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO);
|
||||
|
||||
if (NX_IS_REVISION_P3(revision_id)) {
|
||||
netdev->features |= NETIF_F_IPV6_CSUM;
|
||||
netdev->features |= NETIF_F_TSO6;
|
||||
netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
|
||||
netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
|
||||
}
|
||||
|
||||
if (adapter->pci_using_dac)
|
||||
if (adapter->pci_using_dac) {
|
||||
netdev->features |= NETIF_F_HIGHDMA;
|
||||
netdev->vlan_features |= NETIF_F_HIGHDMA;
|
||||
}
|
||||
|
||||
/*
|
||||
* Set the CRB window to invalid. If any register in window 0 is
|
||||
|
@ -1166,6 +1167,14 @@ static bool netxen_tso_check(struct net_device *netdev,
|
|||
{
|
||||
bool tso = false;
|
||||
u8 opcode = TX_ETHER_PKT;
|
||||
__be16 protocol = skb->protocol;
|
||||
u16 flags = 0;
|
||||
|
||||
if (protocol == __constant_htons(ETH_P_8021Q)) {
|
||||
struct vlan_ethhdr *vh = (struct vlan_ethhdr *)skb->data;
|
||||
protocol = vh->h_vlan_encapsulated_proto;
|
||||
flags = FLAGS_VLAN_TAGGED;
|
||||
}
|
||||
|
||||
if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
|
||||
skb_shinfo(skb)->gso_size > 0) {
|
||||
|
@ -1174,21 +1183,21 @@ static bool netxen_tso_check(struct net_device *netdev,
|
|||
desc->total_hdr_length =
|
||||
skb_transport_offset(skb) + tcp_hdrlen(skb);
|
||||
|
||||
opcode = (skb->protocol == htons(ETH_P_IPV6)) ?
|
||||
opcode = (protocol == __constant_htons(ETH_P_IPV6)) ?
|
||||
TX_TCP_LSO6 : TX_TCP_LSO;
|
||||
tso = true;
|
||||
|
||||
} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
|
||||
u8 l4proto;
|
||||
|
||||
if (skb->protocol == htons(ETH_P_IP)) {
|
||||
if (protocol == __constant_htons(ETH_P_IP)) {
|
||||
l4proto = ip_hdr(skb)->protocol;
|
||||
|
||||
if (l4proto == IPPROTO_TCP)
|
||||
opcode = TX_TCP_PKT;
|
||||
else if(l4proto == IPPROTO_UDP)
|
||||
opcode = TX_UDP_PKT;
|
||||
} else if (skb->protocol == htons(ETH_P_IPV6)) {
|
||||
} else if (protocol == __constant_htons(ETH_P_IPV6)) {
|
||||
l4proto = ipv6_hdr(skb)->nexthdr;
|
||||
|
||||
if (l4proto == IPPROTO_TCP)
|
||||
|
@ -1199,7 +1208,7 @@ static bool netxen_tso_check(struct net_device *netdev,
|
|||
}
|
||||
desc->tcp_hdr_offset = skb_transport_offset(skb);
|
||||
desc->ip_hdr_offset = skb_network_offset(skb);
|
||||
netxen_set_tx_flags_opcode(desc, 0, opcode);
|
||||
netxen_set_tx_flags_opcode(desc, flags, opcode);
|
||||
return tso;
|
||||
}
|
||||
|
||||
|
|
|
@ -296,9 +296,8 @@ static int mdio_bus_suspend(struct device * dev, pm_message_t state)
|
|||
struct phy_driver *phydrv = to_phy_driver(drv);
|
||||
struct phy_device *phydev = to_phy_device(dev);
|
||||
|
||||
if ((!device_may_wakeup(phydev->dev.parent)) &&
|
||||
(phydrv && phydrv->suspend))
|
||||
ret = phydrv->suspend(phydev);
|
||||
if (drv && phydrv->suspend && !device_may_wakeup(phydev->dev.parent))
|
||||
ret = phydrv->suspend(phydev);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
@ -310,8 +309,7 @@ static int mdio_bus_resume(struct device * dev)
|
|||
struct phy_driver *phydrv = to_phy_driver(drv);
|
||||
struct phy_device *phydev = to_phy_device(dev);
|
||||
|
||||
if ((!device_may_wakeup(phydev->dev.parent)) &&
|
||||
(phydrv && phydrv->resume))
|
||||
if (drv && phydrv->resume && !device_may_wakeup(phydev->dev.parent))
|
||||
ret = phydrv->resume(phydev);
|
||||
|
||||
return ret;
|
||||
|
|
|
@ -81,6 +81,9 @@ static struct phy_driver lan83c185_driver = {
|
|||
.ack_interrupt = smsc_phy_ack_interrupt,
|
||||
.config_intr = smsc_phy_config_intr,
|
||||
|
||||
.suspend = genphy_suspend,
|
||||
.resume = genphy_resume,
|
||||
|
||||
.driver = { .owner = THIS_MODULE, }
|
||||
};
|
||||
|
||||
|
@ -102,6 +105,9 @@ static struct phy_driver lan8187_driver = {
|
|||
.ack_interrupt = smsc_phy_ack_interrupt,
|
||||
.config_intr = smsc_phy_config_intr,
|
||||
|
||||
.suspend = genphy_suspend,
|
||||
.resume = genphy_resume,
|
||||
|
||||
.driver = { .owner = THIS_MODULE, }
|
||||
};
|
||||
|
||||
|
@ -123,6 +129,9 @@ static struct phy_driver lan8700_driver = {
|
|||
.ack_interrupt = smsc_phy_ack_interrupt,
|
||||
.config_intr = smsc_phy_config_intr,
|
||||
|
||||
.suspend = genphy_suspend,
|
||||
.resume = genphy_resume,
|
||||
|
||||
.driver = { .owner = THIS_MODULE, }
|
||||
};
|
||||
|
||||
|
@ -144,6 +153,9 @@ static struct phy_driver lan911x_int_driver = {
|
|||
.ack_interrupt = smsc_phy_ack_interrupt,
|
||||
.config_intr = smsc_phy_config_intr,
|
||||
|
||||
.suspend = genphy_suspend,
|
||||
.resume = genphy_resume,
|
||||
|
||||
.driver = { .owner = THIS_MODULE, }
|
||||
};
|
||||
|
||||
|
|
|
@ -7535,11 +7535,58 @@ static int tg3_test_msi(struct tg3 *tp)
|
|||
return err;
|
||||
}
|
||||
|
||||
static int tg3_request_firmware(struct tg3 *tp)
|
||||
{
|
||||
const __be32 *fw_data;
|
||||
|
||||
if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) {
|
||||
printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n",
|
||||
tp->dev->name, tp->fw_needed);
|
||||
return -ENOENT;
|
||||
}
|
||||
|
||||
fw_data = (void *)tp->fw->data;
|
||||
|
||||
/* Firmware blob starts with version numbers, followed by
|
||||
* start address and _full_ length including BSS sections
|
||||
* (which must be longer than the actual data, of course
|
||||
*/
|
||||
|
||||
tp->fw_len = be32_to_cpu(fw_data[2]); /* includes bss */
|
||||
if (tp->fw_len < (tp->fw->size - 12)) {
|
||||
printk(KERN_ERR "%s: bogus length %d in \"%s\"\n",
|
||||
tp->dev->name, tp->fw_len, tp->fw_needed);
|
||||
release_firmware(tp->fw);
|
||||
tp->fw = NULL;
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* We no longer need firmware; we have it. */
|
||||
tp->fw_needed = NULL;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int tg3_open(struct net_device *dev)
|
||||
{
|
||||
struct tg3 *tp = netdev_priv(dev);
|
||||
int err;
|
||||
|
||||
if (tp->fw_needed) {
|
||||
err = tg3_request_firmware(tp);
|
||||
if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) {
|
||||
if (err)
|
||||
return err;
|
||||
} else if (err) {
|
||||
printk(KERN_WARNING "%s: TSO capability disabled.\n",
|
||||
tp->dev->name);
|
||||
tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
|
||||
} else if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
|
||||
printk(KERN_NOTICE "%s: TSO capability restored.\n",
|
||||
tp->dev->name);
|
||||
tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
|
||||
}
|
||||
}
|
||||
|
||||
netif_carrier_off(tp->dev);
|
||||
|
||||
err = tg3_set_power_state(tp, PCI_D0);
|
||||
|
@ -12934,7 +12981,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
|
|||
struct net_device *dev;
|
||||
struct tg3 *tp;
|
||||
int err, pm_cap;
|
||||
const char *fw_name = NULL;
|
||||
char str[40];
|
||||
u64 dma_mask, persist_dma_mask;
|
||||
|
||||
|
@ -13091,7 +13137,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
|
|||
tg3_init_bufmgr_config(tp);
|
||||
|
||||
if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0)
|
||||
fw_name = FIRMWARE_TG3;
|
||||
tp->fw_needed = FIRMWARE_TG3;
|
||||
|
||||
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
|
||||
tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
|
||||
|
@ -13104,37 +13150,10 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
|
|||
tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
|
||||
} else {
|
||||
tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE | TG3_FLG2_TSO_BUG;
|
||||
}
|
||||
if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) {
|
||||
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)
|
||||
fw_name = FIRMWARE_TG3TSO5;
|
||||
tp->fw_needed = FIRMWARE_TG3TSO5;
|
||||
else
|
||||
fw_name = FIRMWARE_TG3TSO;
|
||||
}
|
||||
|
||||
if (fw_name) {
|
||||
const __be32 *fw_data;
|
||||
|
||||
err = request_firmware(&tp->fw, fw_name, &tp->pdev->dev);
|
||||
if (err) {
|
||||
printk(KERN_ERR "tg3: Failed to load firmware \"%s\"\n",
|
||||
fw_name);
|
||||
goto err_out_iounmap;
|
||||
}
|
||||
|
||||
fw_data = (void *)tp->fw->data;
|
||||
|
||||
/* Firmware blob starts with version numbers, followed by
|
||||
start address and _full_ length including BSS sections
|
||||
(which must be longer than the actual data, of course */
|
||||
|
||||
tp->fw_len = be32_to_cpu(fw_data[2]); /* includes bss */
|
||||
if (tp->fw_len < (tp->fw->size - 12)) {
|
||||
printk(KERN_ERR "tg3: bogus length %d in \"%s\"\n",
|
||||
tp->fw_len, fw_name);
|
||||
err = -EINVAL;
|
||||
goto err_out_fw;
|
||||
}
|
||||
tp->fw_needed = FIRMWARE_TG3TSO;
|
||||
}
|
||||
|
||||
/* TSO is on by default on chips that support hardware TSO.
|
||||
|
|
|
@ -2764,6 +2764,7 @@ struct tg3 {
|
|||
struct ethtool_coalesce coal;
|
||||
|
||||
/* firmware info */
|
||||
const char *fw_needed;
|
||||
const struct firmware *fw;
|
||||
u32 fw_len; /* includes BSS */
|
||||
};
|
||||
|
|
|
@ -94,10 +94,18 @@ static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data)
|
|||
{
|
||||
struct usb_device *xdev = dev->udev;
|
||||
int ret;
|
||||
void *buffer;
|
||||
|
||||
buffer = kmalloc(size, GFP_NOIO);
|
||||
if (buffer == NULL)
|
||||
return -ENOMEM;
|
||||
|
||||
ret = usb_control_msg(xdev, usb_rcvctrlpipe(xdev, 0), MCS7830_RD_BREQ,
|
||||
MCS7830_RD_BMREQ, 0x0000, index, data,
|
||||
MCS7830_RD_BMREQ, 0x0000, index, buffer,
|
||||
size, MCS7830_CTRL_TIMEOUT);
|
||||
memcpy(data, buffer, size);
|
||||
kfree(buffer);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
@ -105,10 +113,18 @@ static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, void *data)
|
|||
{
|
||||
struct usb_device *xdev = dev->udev;
|
||||
int ret;
|
||||
void *buffer;
|
||||
|
||||
buffer = kmalloc(size, GFP_NOIO);
|
||||
if (buffer == NULL)
|
||||
return -ENOMEM;
|
||||
|
||||
memcpy(buffer, data, size);
|
||||
|
||||
ret = usb_control_msg(xdev, usb_sndctrlpipe(xdev, 0), MCS7830_WR_BREQ,
|
||||
MCS7830_WR_BMREQ, 0x0000, index, data,
|
||||
MCS7830_WR_BMREQ, 0x0000, index, buffer,
|
||||
size, MCS7830_CTRL_TIMEOUT);
|
||||
kfree(buffer);
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
|
|
@ -1302,7 +1302,7 @@ static void velocity_free_rd_ring(struct velocity_info *vptr)
|
|||
static int velocity_init_td_ring(struct velocity_info *vptr)
|
||||
{
|
||||
dma_addr_t curr;
|
||||
unsigned int j;
|
||||
int j;
|
||||
|
||||
/* Init the TD ring entries */
|
||||
for (j = 0; j < vptr->tx.numq; j++) {
|
||||
|
|
|
@ -24,6 +24,7 @@
|
|||
#include <linux/virtio.h>
|
||||
#include <linux/virtio_net.h>
|
||||
#include <linux/scatterlist.h>
|
||||
#include <linux/if_vlan.h>
|
||||
|
||||
static int napi_weight = 128;
|
||||
module_param(napi_weight, int, 0444);
|
||||
|
@ -33,7 +34,7 @@ module_param(csum, bool, 0444);
|
|||
module_param(gso, bool, 0444);
|
||||
|
||||
/* FIXME: MTU in config. */
|
||||
#define MAX_PACKET_LEN (ETH_HLEN+ETH_DATA_LEN)
|
||||
#define MAX_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN)
|
||||
#define GOOD_COPY_LEN 128
|
||||
|
||||
struct virtnet_info
|
||||
|
|
|
@ -609,7 +609,7 @@ void i2400m_msg_to_dev_cancel_wait(struct i2400m *i2400m, int code)
|
|||
spin_lock_irqsave(&i2400m->rx_lock, flags);
|
||||
ack_skb = i2400m->ack_skb;
|
||||
if (ack_skb && !IS_ERR(ack_skb))
|
||||
kfree(ack_skb);
|
||||
kfree_skb(ack_skb);
|
||||
i2400m->ack_skb = ERR_PTR(code);
|
||||
spin_unlock_irqrestore(&i2400m->rx_lock, flags);
|
||||
}
|
||||
|
|
|
@ -184,6 +184,8 @@ void i2400mu_rx_size_maybe_shrink(struct i2400mu *i2400mu)
|
|||
* NOTE: this function might realloc the skb (if it is too small),
|
||||
* so always update with the one returned.
|
||||
* ERR_PTR() is < 0 on error.
|
||||
* Will return NULL if it cannot reallocate -- this can be
|
||||
* considered a transient retryable error.
|
||||
*/
|
||||
static
|
||||
struct sk_buff *i2400mu_rx(struct i2400mu *i2400mu, struct sk_buff *rx_skb)
|
||||
|
@ -243,8 +245,8 @@ retry:
|
|||
if (printk_ratelimit())
|
||||
dev_err(dev, "RX: Can't reallocate skb to %d; "
|
||||
"RX dropped\n", rx_size);
|
||||
kfree(rx_skb);
|
||||
result = 0;
|
||||
kfree_skb(rx_skb);
|
||||
rx_skb = NULL;
|
||||
goto out; /* drop it...*/
|
||||
}
|
||||
kfree_skb(rx_skb);
|
||||
|
@ -344,7 +346,8 @@ int i2400mu_rxd(void *_i2400mu)
|
|||
if (IS_ERR(rx_skb))
|
||||
goto out;
|
||||
atomic_dec(&i2400mu->rx_pending_count);
|
||||
if (rx_skb->len == 0) { /* some ignorable condition */
|
||||
if (rx_skb == NULL || rx_skb->len == 0) {
|
||||
/* some "ignorable" condition */
|
||||
kfree_skb(rx_skb);
|
||||
continue;
|
||||
}
|
||||
|
|
|
@ -490,7 +490,7 @@ static inline int ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table,
|
|||
|
||||
static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw)
|
||||
{
|
||||
if (WLAN_RC_PHY_HT(phy) & !(capflag & WLAN_RC_HT_FLAG))
|
||||
if (WLAN_RC_PHY_HT(phy) && !(capflag & WLAN_RC_HT_FLAG))
|
||||
return 0;
|
||||
if (WLAN_RC_PHY_DS(phy) && !(capflag & WLAN_RC_DS_FLAG))
|
||||
return 0;
|
||||
|
|
|
@ -228,7 +228,7 @@ enum {
|
|||
};
|
||||
|
||||
#define REG_DOMAIN_2GHZ_MASK (REQ_MASK & \
|
||||
(!(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB)))
|
||||
(~(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB)))
|
||||
#define REG_DOMAIN_5GHZ_MASK REQ_MASK
|
||||
|
||||
static struct reg_dmn_pair_mapping regDomainPairs[] = {
|
||||
|
|
|
@ -638,12 +638,16 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
|
|||
s8 scale_action = 0;
|
||||
unsigned long flags;
|
||||
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
|
||||
u16 fc, rate_mask;
|
||||
u16 fc;
|
||||
u16 rate_mask = 0;
|
||||
struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_r;
|
||||
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
||||
|
||||
IWL_DEBUG_RATE("enter\n");
|
||||
|
||||
if (sta)
|
||||
rate_mask = sta->supp_rates[sband->band];
|
||||
|
||||
/* Send management frames and broadcast/multicast data using lowest
|
||||
* rate. */
|
||||
fc = le16_to_cpu(hdr->frame_control);
|
||||
|
@ -651,11 +655,15 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
|
|||
is_multicast_ether_addr(hdr->addr1) ||
|
||||
!sta || !priv_sta) {
|
||||
IWL_DEBUG_RATE("leave: No STA priv data to update!\n");
|
||||
info->control.rates[0].idx = rate_lowest_index(sband, sta);
|
||||
if (!rate_mask)
|
||||
info->control.rates[0].idx =
|
||||
rate_lowest_index(sband, NULL);
|
||||
else
|
||||
info->control.rates[0].idx =
|
||||
rate_lowest_index(sband, sta);
|
||||
return;
|
||||
}
|
||||
|
||||
rate_mask = sta->supp_rates[sband->band];
|
||||
index = min(rs_sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT - 1);
|
||||
|
||||
if (sband->band == IEEE80211_BAND_5GHZ)
|
||||
|
|
|
@ -944,7 +944,8 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
|
|||
}
|
||||
|
||||
/* See if there's a better rate or modulation mode to try. */
|
||||
rs_rate_scale_perform(priv, hdr, sta, lq_sta);
|
||||
if (sta && sta->supp_rates[sband->band])
|
||||
rs_rate_scale_perform(priv, hdr, sta, lq_sta);
|
||||
out:
|
||||
return;
|
||||
}
|
||||
|
@ -2101,14 +2102,23 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta,
|
|||
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
|
||||
struct iwl_lq_sta *lq_sta = priv_sta;
|
||||
int rate_idx;
|
||||
u64 mask_bit = 0;
|
||||
|
||||
IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n");
|
||||
|
||||
if (sta)
|
||||
mask_bit = sta->supp_rates[sband->band];
|
||||
|
||||
/* Send management frames and broadcast/multicast data using lowest
|
||||
* rate. */
|
||||
if (!ieee80211_is_data(hdr->frame_control) ||
|
||||
is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) {
|
||||
info->control.rates[0].idx = rate_lowest_index(sband, sta);
|
||||
if (!mask_bit)
|
||||
info->control.rates[0].idx =
|
||||
rate_lowest_index(sband, NULL);
|
||||
else
|
||||
info->control.rates[0].idx =
|
||||
rate_lowest_index(sband, sta);
|
||||
return;
|
||||
}
|
||||
|
||||
|
|
|
@ -2482,7 +2482,7 @@ static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
|
|||
dev_kfree_skb_any(skb);
|
||||
|
||||
IWL_DEBUG_MACDUMP("leave\n");
|
||||
return 0;
|
||||
return NETDEV_TX_OK;
|
||||
}
|
||||
|
||||
static int iwl_mac_add_interface(struct ieee80211_hw *hw,
|
||||
|
|
|
@ -224,7 +224,7 @@ int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
|
|||
IWL_ERROR("Error: Response NULL in '%s'\n",
|
||||
get_cmd_string(cmd->id));
|
||||
ret = -EIO;
|
||||
goto out;
|
||||
goto cancel;
|
||||
}
|
||||
|
||||
ret = 0;
|
||||
|
|
|
@ -745,7 +745,7 @@ static int iwl3945_send_cmd_sync(struct iwl3945_priv *priv, struct iwl3945_host_
|
|||
IWL_ERROR("Error: Response NULL in '%s'\n",
|
||||
get_cmd_string(cmd->id));
|
||||
ret = -EIO;
|
||||
goto out;
|
||||
goto cancel;
|
||||
}
|
||||
|
||||
ret = 0;
|
||||
|
@ -6538,7 +6538,7 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
|
|||
dev_kfree_skb_any(skb);
|
||||
|
||||
IWL_DEBUG_MAC80211("leave\n");
|
||||
return 0;
|
||||
return NETDEV_TX_OK;
|
||||
}
|
||||
|
||||
static int iwl3945_mac_add_interface(struct ieee80211_hw *hw,
|
||||
|
|
|
@ -32,7 +32,7 @@ struct txpd {
|
|||
u8 pktdelay_2ms;
|
||||
/* reserved */
|
||||
u8 reserved1;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
/* RxPD Descriptor */
|
||||
struct rxpd {
|
||||
|
@ -63,7 +63,7 @@ struct rxpd {
|
|||
/* Pkt Priority */
|
||||
u8 priority;
|
||||
u8 reserved[3];
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_header {
|
||||
__le16 command;
|
||||
|
@ -97,7 +97,7 @@ struct enc_key {
|
|||
struct lbs_offset_value {
|
||||
u32 offset;
|
||||
u32 value;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
/* Define general data structure */
|
||||
/* cmd_DS_GEN */
|
||||
|
@ -107,7 +107,7 @@ struct cmd_ds_gen {
|
|||
__le16 seqnum;
|
||||
__le16 result;
|
||||
void *cmdresp[0];
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
#define S_DS_GEN sizeof(struct cmd_ds_gen)
|
||||
|
||||
|
@ -163,7 +163,7 @@ struct cmd_ds_802_11_subscribe_event {
|
|||
* bump this up a bit.
|
||||
*/
|
||||
uint8_t tlv[128];
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
/*
|
||||
* This scan handle Country Information IE(802.11d compliant)
|
||||
|
@ -180,7 +180,7 @@ struct cmd_ds_802_11_scan {
|
|||
mrvlietypes_chanlistparamset_t ChanListParamSet;
|
||||
mrvlietypes_ratesparamset_t OpRateSet;
|
||||
#endif
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_scan_rsp {
|
||||
struct cmd_header hdr;
|
||||
|
@ -188,7 +188,7 @@ struct cmd_ds_802_11_scan_rsp {
|
|||
__le16 bssdescriptsize;
|
||||
uint8_t nr_sets;
|
||||
uint8_t bssdesc_and_tlvbuffer[0];
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_get_log {
|
||||
struct cmd_header hdr;
|
||||
|
@ -206,33 +206,33 @@ struct cmd_ds_802_11_get_log {
|
|||
__le32 fcserror;
|
||||
__le32 txframe;
|
||||
__le32 wepundecryptable;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_mac_control {
|
||||
struct cmd_header hdr;
|
||||
__le16 action;
|
||||
u16 reserved;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_mac_multicast_adr {
|
||||
struct cmd_header hdr;
|
||||
__le16 action;
|
||||
__le16 nr_of_adrs;
|
||||
u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_authenticate {
|
||||
u8 macaddr[ETH_ALEN];
|
||||
u8 authtype;
|
||||
u8 reserved[10];
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_deauthenticate {
|
||||
struct cmd_header hdr;
|
||||
|
||||
u8 macaddr[ETH_ALEN];
|
||||
__le16 reasoncode;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_associate {
|
||||
u8 peerstaaddr[6];
|
||||
|
@ -251,7 +251,7 @@ struct cmd_ds_802_11_associate {
|
|||
|
||||
struct cmd_ds_802_11_associate_rsp {
|
||||
struct ieeetypes_assocrsp assocRsp;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_set_wep {
|
||||
struct cmd_header hdr;
|
||||
|
@ -265,7 +265,7 @@ struct cmd_ds_802_11_set_wep {
|
|||
/* 40, 128bit or TXWEP */
|
||||
uint8_t keytype[4];
|
||||
uint8_t keymaterial[4][16];
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_3_get_stat {
|
||||
__le32 xmitok;
|
||||
|
@ -274,7 +274,7 @@ struct cmd_ds_802_3_get_stat {
|
|||
__le32 rcverror;
|
||||
__le32 rcvnobuffer;
|
||||
__le32 rcvcrcerror;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_get_stat {
|
||||
__le32 txfragmentcnt;
|
||||
|
@ -294,7 +294,7 @@ struct cmd_ds_802_11_get_stat {
|
|||
__le32 txbeacon;
|
||||
__le32 rxbeacon;
|
||||
__le32 wepundecryptable;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_snmp_mib {
|
||||
struct cmd_header hdr;
|
||||
|
@ -303,58 +303,58 @@ struct cmd_ds_802_11_snmp_mib {
|
|||
__le16 oid;
|
||||
__le16 bufsize;
|
||||
u8 value[128];
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_mac_reg_map {
|
||||
__le16 buffersize;
|
||||
u8 regmap[128];
|
||||
__le16 reserved;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_bbp_reg_map {
|
||||
__le16 buffersize;
|
||||
u8 regmap[128];
|
||||
__le16 reserved;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_rf_reg_map {
|
||||
__le16 buffersize;
|
||||
u8 regmap[64];
|
||||
__le16 reserved;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_mac_reg_access {
|
||||
__le16 action;
|
||||
__le16 offset;
|
||||
__le32 value;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_bbp_reg_access {
|
||||
__le16 action;
|
||||
__le16 offset;
|
||||
u8 value;
|
||||
u8 reserved[3];
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_rf_reg_access {
|
||||
__le16 action;
|
||||
__le16 offset;
|
||||
u8 value;
|
||||
u8 reserved[3];
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_radio_control {
|
||||
struct cmd_header hdr;
|
||||
|
||||
__le16 action;
|
||||
__le16 control;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_beacon_control {
|
||||
__le16 action;
|
||||
__le16 beacon_enable;
|
||||
__le16 beacon_period;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_sleep_params {
|
||||
struct cmd_header hdr;
|
||||
|
@ -379,7 +379,7 @@ struct cmd_ds_802_11_sleep_params {
|
|||
|
||||
/* reserved field, should be set to zero */
|
||||
__le16 reserved;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_inactivity_timeout {
|
||||
struct cmd_header hdr;
|
||||
|
@ -389,7 +389,7 @@ struct cmd_ds_802_11_inactivity_timeout {
|
|||
|
||||
/* Inactivity timeout in msec */
|
||||
__le16 timeout;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_rf_channel {
|
||||
struct cmd_header hdr;
|
||||
|
@ -399,7 +399,7 @@ struct cmd_ds_802_11_rf_channel {
|
|||
__le16 rftype; /* unused */
|
||||
__le16 reserved; /* unused */
|
||||
u8 channellist[32]; /* unused */
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_rssi {
|
||||
/* weighting factor */
|
||||
|
@ -408,21 +408,21 @@ struct cmd_ds_802_11_rssi {
|
|||
__le16 reserved_0;
|
||||
__le16 reserved_1;
|
||||
__le16 reserved_2;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_rssi_rsp {
|
||||
__le16 SNR;
|
||||
__le16 noisefloor;
|
||||
__le16 avgSNR;
|
||||
__le16 avgnoisefloor;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_mac_address {
|
||||
struct cmd_header hdr;
|
||||
|
||||
__le16 action;
|
||||
u8 macadd[ETH_ALEN];
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_rf_tx_power {
|
||||
struct cmd_header hdr;
|
||||
|
@ -431,7 +431,7 @@ struct cmd_ds_802_11_rf_tx_power {
|
|||
__le16 curlevel;
|
||||
s8 maxlevel;
|
||||
s8 minlevel;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_rf_antenna {
|
||||
__le16 action;
|
||||
|
@ -439,33 +439,33 @@ struct cmd_ds_802_11_rf_antenna {
|
|||
/* Number of antennas or 0xffff(diversity) */
|
||||
__le16 antennamode;
|
||||
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_monitor_mode {
|
||||
__le16 action;
|
||||
__le16 mode;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_set_boot2_ver {
|
||||
struct cmd_header hdr;
|
||||
|
||||
__le16 action;
|
||||
__le16 version;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_fw_wake_method {
|
||||
struct cmd_header hdr;
|
||||
|
||||
__le16 action;
|
||||
__le16 method;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_sleep_period {
|
||||
struct cmd_header hdr;
|
||||
|
||||
__le16 action;
|
||||
__le16 period;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_ps_mode {
|
||||
__le16 action;
|
||||
|
@ -473,7 +473,7 @@ struct cmd_ds_802_11_ps_mode {
|
|||
__le16 multipledtim;
|
||||
__le16 reserved;
|
||||
__le16 locallisteninterval;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_confirm_sleep {
|
||||
struct cmd_header hdr;
|
||||
|
@ -483,7 +483,7 @@ struct cmd_confirm_sleep {
|
|||
__le16 multipledtim;
|
||||
__le16 reserved;
|
||||
__le16 locallisteninterval;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_data_rate {
|
||||
struct cmd_header hdr;
|
||||
|
@ -491,14 +491,14 @@ struct cmd_ds_802_11_data_rate {
|
|||
__le16 action;
|
||||
__le16 reserved;
|
||||
u8 rates[MAX_RATES];
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_rate_adapt_rateset {
|
||||
struct cmd_header hdr;
|
||||
__le16 action;
|
||||
__le16 enablehwauto;
|
||||
__le16 bitmap;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_802_11_ad_hoc_start {
|
||||
struct cmd_header hdr;
|
||||
|
@ -520,7 +520,7 @@ struct cmd_ds_802_11_ad_hoc_result {
|
|||
|
||||
u8 pad[3];
|
||||
u8 bssid[ETH_ALEN];
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct adhoc_bssdesc {
|
||||
u8 bssid[ETH_ALEN];
|
||||
|
@ -578,7 +578,7 @@ struct MrvlIEtype_keyParamSet {
|
|||
|
||||
/* key material of size keylen */
|
||||
u8 key[32];
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
#define MAX_WOL_RULES 16
|
||||
|
||||
|
@ -590,7 +590,7 @@ struct host_wol_rule {
|
|||
__le16 reserve;
|
||||
__be32 sig_mask;
|
||||
__be32 signature;
|
||||
};
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct wol_config {
|
||||
uint8_t action;
|
||||
|
@ -598,8 +598,7 @@ struct wol_config {
|
|||
uint8_t no_rules_in_cmd;
|
||||
uint8_t result;
|
||||
struct host_wol_rule rule[MAX_WOL_RULES];
|
||||
};
|
||||
|
||||
} __attribute__ ((packed));
|
||||
|
||||
struct cmd_ds_host_sleep {
|
||||
struct cmd_header hdr;
|
||||
|
|
|
@ -1673,7 +1673,7 @@ static void print_linkstatus(struct net_device *dev, u16 status)
|
|||
s = "UNKNOWN";
|
||||
}
|
||||
|
||||
printk(KERN_INFO "%s: New link status: %s (%04x)\n",
|
||||
printk(KERN_DEBUG "%s: New link status: %s (%04x)\n",
|
||||
dev->name, s, status);
|
||||
}
|
||||
|
||||
|
@ -5068,33 +5068,30 @@ static int orinoco_ioctl_set_genie(struct net_device *dev,
|
|||
struct orinoco_private *priv = netdev_priv(dev);
|
||||
u8 *buf;
|
||||
unsigned long flags;
|
||||
int err = 0;
|
||||
|
||||
/* cut off at IEEE80211_MAX_DATA_LEN */
|
||||
if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) ||
|
||||
(wrqu->data.length && (extra == NULL)))
|
||||
return -EINVAL;
|
||||
|
||||
if (orinoco_lock(priv, &flags) != 0)
|
||||
return -EBUSY;
|
||||
|
||||
if (wrqu->data.length) {
|
||||
buf = kmalloc(wrqu->data.length, GFP_KERNEL);
|
||||
if (buf == NULL) {
|
||||
err = -ENOMEM;
|
||||
goto out;
|
||||
}
|
||||
if (buf == NULL)
|
||||
return -ENOMEM;
|
||||
|
||||
memcpy(buf, extra, wrqu->data.length);
|
||||
kfree(priv->wpa_ie);
|
||||
priv->wpa_ie = buf;
|
||||
priv->wpa_ie_len = wrqu->data.length;
|
||||
} else {
|
||||
kfree(priv->wpa_ie);
|
||||
priv->wpa_ie = NULL;
|
||||
priv->wpa_ie_len = 0;
|
||||
} else
|
||||
buf = NULL;
|
||||
|
||||
if (orinoco_lock(priv, &flags) != 0) {
|
||||
kfree(buf);
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
kfree(priv->wpa_ie);
|
||||
priv->wpa_ie = buf;
|
||||
priv->wpa_ie_len = wrqu->data.length;
|
||||
|
||||
if (priv->wpa_ie) {
|
||||
/* Looks like wl_lkm wants to check the auth alg, and
|
||||
* somehow pass it to the firmware.
|
||||
|
@ -5103,9 +5100,8 @@ static int orinoco_ioctl_set_genie(struct net_device *dev,
|
|||
*/
|
||||
}
|
||||
|
||||
out:
|
||||
orinoco_unlock(priv, &flags);
|
||||
return err;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int orinoco_ioctl_get_genie(struct net_device *dev,
|
||||
|
|
|
@ -451,8 +451,8 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
|
|||
}
|
||||
if (err)
|
||||
goto err;
|
||||
|
||||
}
|
||||
}
|
||||
break;
|
||||
case PDR_PRISM_ZIF_TX_IQ_CALIBRATION:
|
||||
priv->iq_autocal = kmalloc(data_len, GFP_KERNEL);
|
||||
if (!priv->iq_autocal) {
|
||||
|
@ -745,7 +745,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
|
|||
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
|
||||
struct p54_hdr *entry_hdr;
|
||||
struct p54_tx_data *entry_data;
|
||||
int pad = 0;
|
||||
unsigned int pad = 0, frame_len;
|
||||
|
||||
range = (void *)info->rate_driver_data;
|
||||
if (range->start_addr != addr) {
|
||||
|
@ -768,6 +768,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
|
|||
__skb_unlink(entry, &priv->tx_queue);
|
||||
spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
|
||||
|
||||
frame_len = entry->len;
|
||||
entry_hdr = (struct p54_hdr *) entry->data;
|
||||
entry_data = (struct p54_tx_data *) entry_hdr->data;
|
||||
priv->tx_stats[entry_data->hw_queue].len--;
|
||||
|
@ -814,15 +815,28 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
|
|||
info->status.ack_signal = p54_rssi_to_dbm(dev,
|
||||
(int)payload->ack_rssi);
|
||||
|
||||
if (entry_data->key_type == P54_CRYPTO_TKIPMICHAEL) {
|
||||
/* Undo all changes to the frame. */
|
||||
switch (entry_data->key_type) {
|
||||
case P54_CRYPTO_TKIPMICHAEL: {
|
||||
u8 *iv = (u8 *)(entry_data->align + pad +
|
||||
entry_data->crypt_offset);
|
||||
entry_data->crypt_offset);
|
||||
|
||||
/* Restore the original TKIP IV. */
|
||||
iv[2] = iv[0];
|
||||
iv[0] = iv[1];
|
||||
iv[1] = (iv[0] | 0x20) & 0x7f; /* WEPSeed - 8.3.2.2 */
|
||||
|
||||
frame_len -= 12; /* remove TKIP_MMIC + TKIP_ICV */
|
||||
break;
|
||||
}
|
||||
case P54_CRYPTO_AESCCMP:
|
||||
frame_len -= 8; /* remove CCMP_MIC */
|
||||
break;
|
||||
case P54_CRYPTO_WEP:
|
||||
frame_len -= 4; /* remove WEP_ICV */
|
||||
break;
|
||||
}
|
||||
skb_trim(entry, frame_len);
|
||||
skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
|
||||
ieee80211_tx_status_irqsafe(dev, entry);
|
||||
goto out;
|
||||
|
@ -1147,7 +1161,7 @@ static int p54_set_tim(struct ieee80211_hw *dev, struct ieee80211_sta *sta,
|
|||
|
||||
skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET,
|
||||
sizeof(struct p54_hdr) + sizeof(*tim),
|
||||
P54_CONTROL_TYPE_TIM, GFP_KERNEL);
|
||||
P54_CONTROL_TYPE_TIM, GFP_ATOMIC);
|
||||
if (!skb)
|
||||
return -ENOMEM;
|
||||
|
||||
|
@ -1610,7 +1624,7 @@ static int p54_scan(struct ieee80211_hw *dev, u16 mode, u16 dwell)
|
|||
|
||||
err:
|
||||
printk(KERN_ERR "%s: frequency change failed\n", wiphy_name(dev->wiphy));
|
||||
kfree_skb(skb);
|
||||
p54_free_skb(dev, skb);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
|
@ -2077,7 +2091,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
|
|||
algo = P54_CRYPTO_AESCCMP;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
}
|
||||
|
||||
|
|
|
@ -144,11 +144,8 @@ static void p54u_tx_cb(struct urb *urb)
|
|||
struct sk_buff *skb = urb->context;
|
||||
struct ieee80211_hw *dev = (struct ieee80211_hw *)
|
||||
usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
|
||||
struct p54u_priv *priv = dev->priv;
|
||||
|
||||
skb_pull(skb, priv->common.tx_hdr_len);
|
||||
if (FREE_AFTER_TX(skb))
|
||||
p54_free_skb(dev, skb);
|
||||
p54_free_skb(dev, skb);
|
||||
}
|
||||
|
||||
static void p54u_tx_dummy_cb(struct urb *urb) { }
|
||||
|
@ -230,7 +227,10 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb)
|
|||
p54u_tx_dummy_cb, dev);
|
||||
usb_fill_bulk_urb(data_urb, priv->udev,
|
||||
usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
|
||||
skb->data, skb->len, p54u_tx_cb, skb);
|
||||
skb->data, skb->len, FREE_AFTER_TX(skb) ?
|
||||
p54u_tx_cb : p54u_tx_dummy_cb, skb);
|
||||
addr_urb->transfer_flags |= URB_ZERO_PACKET;
|
||||
data_urb->transfer_flags |= URB_ZERO_PACKET;
|
||||
|
||||
usb_anchor_urb(addr_urb, &priv->submitted);
|
||||
err = usb_submit_urb(addr_urb, GFP_ATOMIC);
|
||||
|
@ -239,7 +239,7 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb)
|
|||
goto out;
|
||||
}
|
||||
|
||||
usb_anchor_urb(addr_urb, &priv->submitted);
|
||||
usb_anchor_urb(data_urb, &priv->submitted);
|
||||
err = usb_submit_urb(data_urb, GFP_ATOMIC);
|
||||
if (err)
|
||||
usb_unanchor_urb(data_urb);
|
||||
|
@ -269,28 +269,24 @@ static void p54u_tx_lm87(struct ieee80211_hw *dev, struct sk_buff *skb)
|
|||
{
|
||||
struct p54u_priv *priv = dev->priv;
|
||||
struct urb *data_urb;
|
||||
struct lm87_tx_hdr *hdr;
|
||||
__le32 checksum;
|
||||
__le32 addr = ((struct p54_hdr *)skb->data)->req_id;
|
||||
struct lm87_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr);
|
||||
|
||||
data_urb = usb_alloc_urb(0, GFP_ATOMIC);
|
||||
if (!data_urb)
|
||||
return;
|
||||
|
||||
checksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len);
|
||||
hdr = (struct lm87_tx_hdr *)skb_push(skb, sizeof(*hdr));
|
||||
hdr->chksum = checksum;
|
||||
hdr->device_addr = addr;
|
||||
hdr->chksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len);
|
||||
hdr->device_addr = ((struct p54_hdr *)skb->data)->req_id;
|
||||
|
||||
usb_fill_bulk_urb(data_urb, priv->udev,
|
||||
usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
|
||||
skb->data, skb->len, p54u_tx_cb, skb);
|
||||
hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ?
|
||||
p54u_tx_cb : p54u_tx_dummy_cb, skb);
|
||||
data_urb->transfer_flags |= URB_ZERO_PACKET;
|
||||
|
||||
usb_anchor_urb(data_urb, &priv->submitted);
|
||||
if (usb_submit_urb(data_urb, GFP_ATOMIC)) {
|
||||
usb_unanchor_urb(data_urb);
|
||||
skb_pull(skb, sizeof(*hdr));
|
||||
p54_free_skb(dev, skb);
|
||||
}
|
||||
usb_free_urb(data_urb);
|
||||
|
@ -300,11 +296,9 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb)
|
|||
{
|
||||
struct p54u_priv *priv = dev->priv;
|
||||
struct urb *int_urb, *data_urb;
|
||||
struct net2280_tx_hdr *hdr;
|
||||
struct net2280_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr);
|
||||
struct net2280_reg_write *reg;
|
||||
int err = 0;
|
||||
__le32 addr = ((struct p54_hdr *) skb->data)->req_id;
|
||||
__le16 len = cpu_to_le16(skb->len);
|
||||
|
||||
reg = kmalloc(sizeof(*reg), GFP_ATOMIC);
|
||||
if (!reg)
|
||||
|
@ -327,10 +321,9 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb)
|
|||
reg->addr = cpu_to_le32(P54U_DEV_BASE);
|
||||
reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA);
|
||||
|
||||
hdr = (void *)skb_push(skb, sizeof(*hdr));
|
||||
memset(hdr, 0, sizeof(*hdr));
|
||||
hdr->len = len;
|
||||
hdr->device_addr = addr;
|
||||
hdr->len = cpu_to_le16(skb->len);
|
||||
hdr->device_addr = ((struct p54_hdr *) skb->data)->req_id;
|
||||
|
||||
usb_fill_bulk_urb(int_urb, priv->udev,
|
||||
usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg),
|
||||
|
@ -341,11 +334,13 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb)
|
|||
* free what's inside the transfer_buffer after the callback routine
|
||||
* has completed.
|
||||
*/
|
||||
int_urb->transfer_flags |= URB_FREE_BUFFER;
|
||||
int_urb->transfer_flags |= URB_FREE_BUFFER | URB_ZERO_PACKET;
|
||||
|
||||
usb_fill_bulk_urb(data_urb, priv->udev,
|
||||
usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
|
||||
skb->data, skb->len, p54u_tx_cb, skb);
|
||||
hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ?
|
||||
p54u_tx_cb : p54u_tx_dummy_cb, skb);
|
||||
data_urb->transfer_flags |= URB_ZERO_PACKET;
|
||||
|
||||
usb_anchor_urb(int_urb, &priv->submitted);
|
||||
err = usb_submit_urb(int_urb, GFP_ATOMIC);
|
||||
|
|
|
@ -1649,9 +1649,7 @@ static char *rndis_translate_scan(struct net_device *dev,
|
|||
char *end_buf,
|
||||
struct ndis_80211_bssid_ex *bssid)
|
||||
{
|
||||
#ifdef DEBUG
|
||||
struct usbnet *usbdev = netdev_priv(dev);
|
||||
#endif
|
||||
u8 *ie;
|
||||
char *current_val;
|
||||
int bssid_len, ie_len, i;
|
||||
|
|
|
@ -154,6 +154,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
|
|||
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
|
||||
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
|
||||
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data;
|
||||
struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0];
|
||||
struct ieee80211_rate *rate =
|
||||
ieee80211_get_tx_rate(rt2x00dev->hw, tx_info);
|
||||
const struct rt2x00_rate *hwrate;
|
||||
|
@ -313,7 +314,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
|
|||
* When preamble is enabled we should set the
|
||||
* preamble bit for the signal.
|
||||
*/
|
||||
if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
|
||||
if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
|
||||
txdesc->signal |= 0x08;
|
||||
}
|
||||
}
|
||||
|
|
|
@ -162,7 +162,7 @@ void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev)
|
|||
|
||||
void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev)
|
||||
{
|
||||
if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->flags))
|
||||
if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state))
|
||||
return;
|
||||
|
||||
cancel_delayed_work_sync(&rt2x00dev->rfkill_work);
|
||||
|
|
|
@ -273,6 +273,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
|
|||
|
||||
usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep),
|
||||
buf, skb->len, rtl8187_tx_cb, skb);
|
||||
urb->transfer_flags |= URB_ZERO_PACKET;
|
||||
usb_anchor_urb(urb, &priv->anchored);
|
||||
rc = usb_submit_urb(urb, GFP_ATOMIC);
|
||||
if (rc < 0) {
|
||||
|
|
|
@ -84,6 +84,7 @@ static struct usb_device_id usb_ids[] = {
|
|||
{ USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B },
|
||||
{ USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B },
|
||||
{ USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B },
|
||||
{ USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B },
|
||||
/* "Driverless" devices that need ejecting */
|
||||
{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
|
||||
{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
|
||||
|
|
|
@ -70,7 +70,9 @@ static char debug_buffer[255];
|
|||
static void lcs_tasklet(unsigned long);
|
||||
static void lcs_start_kernel_thread(struct work_struct *);
|
||||
static void lcs_get_frames_cb(struct lcs_channel *, struct lcs_buffer *);
|
||||
#ifdef CONFIG_IP_MULTICAST
|
||||
static int lcs_send_delipm(struct lcs_card *, struct lcs_ipm_list *);
|
||||
#endif /* CONFIG_IP_MULTICAST */
|
||||
static int lcs_recovery(void *ptr);
|
||||
|
||||
/**
|
||||
|
@ -1285,6 +1287,8 @@ out:
|
|||
lcs_clear_thread_running_bit(card, LCS_SET_MC_THREAD);
|
||||
return 0;
|
||||
}
|
||||
#endif /* CONFIG_IP_MULTICAST */
|
||||
|
||||
/**
|
||||
* function called by net device to
|
||||
* handle multicast address relevant things
|
||||
|
@ -1292,6 +1296,7 @@ out:
|
|||
static void
|
||||
lcs_set_multicast_list(struct net_device *dev)
|
||||
{
|
||||
#ifdef CONFIG_IP_MULTICAST
|
||||
struct lcs_card *card;
|
||||
|
||||
LCS_DBF_TEXT(4, trace, "setmulti");
|
||||
|
@ -1299,9 +1304,8 @@ lcs_set_multicast_list(struct net_device *dev)
|
|||
|
||||
if (!lcs_set_thread_start_bit(card, LCS_SET_MC_THREAD))
|
||||
schedule_work(&card->kernel_thread_starter);
|
||||
}
|
||||
|
||||
#endif /* CONFIG_IP_MULTICAST */
|
||||
}
|
||||
|
||||
static long
|
||||
lcs_check_irb_error(struct ccw_device *cdev, struct irb *irb)
|
||||
|
|
|
@ -26,8 +26,6 @@
|
|||
|
||||
#include <linux/if.h>
|
||||
|
||||
#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
|
||||
|
||||
/* Structures and constants associated with the DLCI device driver */
|
||||
|
||||
struct dlci_add
|
||||
|
@ -127,6 +125,8 @@ struct frad_conf
|
|||
|
||||
#ifdef __KERNEL__
|
||||
|
||||
#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE)
|
||||
|
||||
/* these are the fields of an RFC 1490 header */
|
||||
struct frhdr
|
||||
{
|
||||
|
@ -190,12 +190,10 @@ struct frad_local
|
|||
int buffer; /* current buffer for S508 firmware */
|
||||
};
|
||||
|
||||
#endif /* __KERNEL__ */
|
||||
|
||||
#endif /* CONFIG_DLCI || CONFIG_DLCI_MODULE */
|
||||
|
||||
#ifdef __KERNEL__
|
||||
extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *));
|
||||
#endif
|
||||
|
||||
#endif /* __KERNEL__ */
|
||||
|
||||
#endif
|
||||
|
|
|
@ -197,7 +197,9 @@ extern int usbnet_nway_reset(struct net_device *net);
|
|||
#define devdbg(usbnet, fmt, arg...) \
|
||||
printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , ## arg)
|
||||
#else
|
||||
#define devdbg(usbnet, fmt, arg...) do {} while(0)
|
||||
#define devdbg(usbnet, fmt, arg...) \
|
||||
({ if (0) printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , \
|
||||
## arg); 0; })
|
||||
#endif
|
||||
|
||||
#define deverr(usbnet, fmt, arg...) \
|
||||
|
|
|
@ -322,7 +322,6 @@ struct ieee80211_tx_rate {
|
|||
* @control: union for control data
|
||||
* @status: union for status data
|
||||
* @driver_data: array of driver_data pointers
|
||||
* @retry_count: number of retries
|
||||
* @ampdu_ack_len: number of aggregated frames.
|
||||
* relevant only if IEEE80211_TX_STATUS_AMPDU was set.
|
||||
* @ampdu_ack_map: block ack bit map for the aggregation.
|
||||
|
|
|
@ -79,5 +79,5 @@ static inline __be32 sctp_update_cksum(__u8 *buffer, __u16 length, __be32 crc32)
|
|||
|
||||
static inline __be32 sctp_end_cksum(__be32 crc32)
|
||||
{
|
||||
return ~crc32;
|
||||
return (__force __be32)~cpu_to_le32((__force u32)crc32);
|
||||
}
|
||||
|
|
|
@ -633,6 +633,14 @@ config PID_NS
|
|||
Unless you want to work with an experimental feature
|
||||
say N here.
|
||||
|
||||
config NET_NS
|
||||
bool "Network namespace"
|
||||
default n
|
||||
depends on NAMESPACES && EXPERIMENTAL && NET
|
||||
help
|
||||
Allow user space to create what appear to be multiple instances
|
||||
of the network stack.
|
||||
|
||||
config BLK_DEV_INITRD
|
||||
bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
|
||||
depends on BROKEN || !FRV
|
||||
|
|
|
@ -62,13 +62,13 @@ struct net_device *vlan_dev_real_dev(const struct net_device *dev)
|
|||
{
|
||||
return vlan_dev_info(dev)->real_dev;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(vlan_dev_real_dev);
|
||||
EXPORT_SYMBOL(vlan_dev_real_dev);
|
||||
|
||||
u16 vlan_dev_vlan_id(const struct net_device *dev)
|
||||
{
|
||||
return vlan_dev_info(dev)->vlan_id;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(vlan_dev_vlan_id);
|
||||
EXPORT_SYMBOL(vlan_dev_vlan_id);
|
||||
|
||||
static int vlan_gro_common(struct napi_struct *napi, struct vlan_group *grp,
|
||||
unsigned int vlan_tci, struct sk_buff *skb)
|
||||
|
|
|
@ -618,7 +618,7 @@ static struct p9_fid *p9_fid_create(struct p9_client *clnt)
|
|||
return ERR_PTR(-ENOMEM);
|
||||
|
||||
ret = p9_idpool_get(clnt->fidpool);
|
||||
if (fid->fid < 0) {
|
||||
if (ret < 0) {
|
||||
ret = -ENOSPC;
|
||||
goto error;
|
||||
}
|
||||
|
|
|
@ -24,14 +24,6 @@ if NET
|
|||
|
||||
menu "Networking options"
|
||||
|
||||
config NET_NS
|
||||
bool "Network namespace support"
|
||||
default n
|
||||
depends on EXPERIMENTAL && NAMESPACES
|
||||
help
|
||||
Allow user space to create what appear to be multiple instances
|
||||
of the network stack.
|
||||
|
||||
config COMPAT_NET_DEV_OPS
|
||||
def_bool y
|
||||
|
||||
|
|
|
@ -1534,7 +1534,19 @@ struct sk_buff *skb_gso_segment(struct sk_buff *skb, int features)
|
|||
skb->mac_len = skb->network_header - skb->mac_header;
|
||||
__skb_pull(skb, skb->mac_len);
|
||||
|
||||
if (WARN_ON(skb->ip_summed != CHECKSUM_PARTIAL)) {
|
||||
if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) {
|
||||
struct net_device *dev = skb->dev;
|
||||
struct ethtool_drvinfo info = {};
|
||||
|
||||
if (dev && dev->ethtool_ops && dev->ethtool_ops->get_drvinfo)
|
||||
dev->ethtool_ops->get_drvinfo(dev, &info);
|
||||
|
||||
WARN(1, "%s: caps=(0x%lx, 0x%lx) len=%d data_len=%d "
|
||||
"ip_summed=%d",
|
||||
info.driver, dev ? dev->features : 0L,
|
||||
skb->sk ? skb->sk->sk_route_caps : 0L,
|
||||
skb->len, skb->data_len, skb->ip_summed);
|
||||
|
||||
if (skb_header_cloned(skb) &&
|
||||
(err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC)))
|
||||
return ERR_PTR(err);
|
||||
|
@ -2524,6 +2536,7 @@ struct sk_buff *napi_fraginfo_skb(struct napi_struct *napi,
|
|||
|
||||
if (!pskb_may_pull(skb, ETH_HLEN)) {
|
||||
napi_reuse_skb(napi, skb);
|
||||
skb = NULL;
|
||||
goto out;
|
||||
}
|
||||
|
||||
|
|
|
@ -341,8 +341,8 @@ again:
|
|||
rv = register_pernet_operations(first_device, ops);
|
||||
if (rv < 0)
|
||||
ida_remove(&net_generic_ids, *id);
|
||||
mutex_unlock(&net_mutex);
|
||||
out:
|
||||
mutex_unlock(&net_mutex);
|
||||
return rv;
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(register_pernet_gen_subsys);
|
||||
|
|
|
@ -73,17 +73,13 @@ static struct kmem_cache *skbuff_fclone_cache __read_mostly;
|
|||
static void sock_pipe_buf_release(struct pipe_inode_info *pipe,
|
||||
struct pipe_buffer *buf)
|
||||
{
|
||||
struct sk_buff *skb = (struct sk_buff *) buf->private;
|
||||
|
||||
kfree_skb(skb);
|
||||
put_page(buf->page);
|
||||
}
|
||||
|
||||
static void sock_pipe_buf_get(struct pipe_inode_info *pipe,
|
||||
struct pipe_buffer *buf)
|
||||
{
|
||||
struct sk_buff *skb = (struct sk_buff *) buf->private;
|
||||
|
||||
skb_get(skb);
|
||||
get_page(buf->page);
|
||||
}
|
||||
|
||||
static int sock_pipe_buf_steal(struct pipe_inode_info *pipe,
|
||||
|
@ -1334,9 +1330,19 @@ fault:
|
|||
*/
|
||||
static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i)
|
||||
{
|
||||
struct sk_buff *skb = (struct sk_buff *) spd->partial[i].private;
|
||||
put_page(spd->pages[i]);
|
||||
}
|
||||
|
||||
kfree_skb(skb);
|
||||
static inline struct page *linear_to_page(struct page *page, unsigned int len,
|
||||
unsigned int offset)
|
||||
{
|
||||
struct page *p = alloc_pages(GFP_KERNEL, 0);
|
||||
|
||||
if (!p)
|
||||
return NULL;
|
||||
memcpy(page_address(p) + offset, page_address(page) + offset, len);
|
||||
|
||||
return p;
|
||||
}
|
||||
|
||||
/*
|
||||
|
@ -1344,16 +1350,23 @@ static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i)
|
|||
*/
|
||||
static inline int spd_fill_page(struct splice_pipe_desc *spd, struct page *page,
|
||||
unsigned int len, unsigned int offset,
|
||||
struct sk_buff *skb)
|
||||
struct sk_buff *skb, int linear)
|
||||
{
|
||||
if (unlikely(spd->nr_pages == PIPE_BUFFERS))
|
||||
return 1;
|
||||
|
||||
if (linear) {
|
||||
page = linear_to_page(page, len, offset);
|
||||
if (!page)
|
||||
return 1;
|
||||
} else
|
||||
get_page(page);
|
||||
|
||||
spd->pages[spd->nr_pages] = page;
|
||||
spd->partial[spd->nr_pages].len = len;
|
||||
spd->partial[spd->nr_pages].offset = offset;
|
||||
spd->partial[spd->nr_pages].private = (unsigned long) skb_get(skb);
|
||||
spd->nr_pages++;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -1369,7 +1382,7 @@ static inline void __segment_seek(struct page **page, unsigned int *poff,
|
|||
static inline int __splice_segment(struct page *page, unsigned int poff,
|
||||
unsigned int plen, unsigned int *off,
|
||||
unsigned int *len, struct sk_buff *skb,
|
||||
struct splice_pipe_desc *spd)
|
||||
struct splice_pipe_desc *spd, int linear)
|
||||
{
|
||||
if (!*len)
|
||||
return 1;
|
||||
|
@ -1392,7 +1405,7 @@ static inline int __splice_segment(struct page *page, unsigned int poff,
|
|||
/* the linear region may spread across several pages */
|
||||
flen = min_t(unsigned int, flen, PAGE_SIZE - poff);
|
||||
|
||||
if (spd_fill_page(spd, page, flen, poff, skb))
|
||||
if (spd_fill_page(spd, page, flen, poff, skb, linear))
|
||||
return 1;
|
||||
|
||||
__segment_seek(&page, &poff, &plen, flen);
|
||||
|
@ -1419,7 +1432,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset,
|
|||
if (__splice_segment(virt_to_page(skb->data),
|
||||
(unsigned long) skb->data & (PAGE_SIZE - 1),
|
||||
skb_headlen(skb),
|
||||
offset, len, skb, spd))
|
||||
offset, len, skb, spd, 1))
|
||||
return 1;
|
||||
|
||||
/*
|
||||
|
@ -1429,7 +1442,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset,
|
|||
const skb_frag_t *f = &skb_shinfo(skb)->frags[seg];
|
||||
|
||||
if (__splice_segment(f->page, f->page_offset, f->size,
|
||||
offset, len, skb, spd))
|
||||
offset, len, skb, spd, 0))
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
@ -1442,7 +1455,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset,
|
|||
* the frag list, if such a thing exists. We'd probably need to recurse to
|
||||
* handle that cleanly.
|
||||
*/
|
||||
int skb_splice_bits(struct sk_buff *__skb, unsigned int offset,
|
||||
int skb_splice_bits(struct sk_buff *skb, unsigned int offset,
|
||||
struct pipe_inode_info *pipe, unsigned int tlen,
|
||||
unsigned int flags)
|
||||
{
|
||||
|
@ -1455,16 +1468,6 @@ int skb_splice_bits(struct sk_buff *__skb, unsigned int offset,
|
|||
.ops = &sock_pipe_buf_ops,
|
||||
.spd_release = sock_spd_release,
|
||||
};
|
||||
struct sk_buff *skb;
|
||||
|
||||
/*
|
||||
* I'd love to avoid the clone here, but tcp_read_sock()
|
||||
* ignores reference counts and unconditonally kills the sk_buff
|
||||
* on return from the actor.
|
||||
*/
|
||||
skb = skb_clone(__skb, GFP_KERNEL);
|
||||
if (unlikely(!skb))
|
||||
return -ENOMEM;
|
||||
|
||||
/*
|
||||
* __skb_splice_bits() only fails if the output has no room left,
|
||||
|
@ -1488,15 +1491,9 @@ int skb_splice_bits(struct sk_buff *__skb, unsigned int offset,
|
|||
}
|
||||
|
||||
done:
|
||||
/*
|
||||
* drop our reference to the clone, the pipe consumption will
|
||||
* drop the rest.
|
||||
*/
|
||||
kfree_skb(skb);
|
||||
|
||||
if (spd.nr_pages) {
|
||||
struct sock *sk = skb->sk;
|
||||
int ret;
|
||||
struct sock *sk = __skb->sk;
|
||||
|
||||
/*
|
||||
* Drop the socket lock, otherwise we have reverse
|
||||
|
@ -2588,8 +2585,9 @@ int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb)
|
|||
struct sk_buff *nskb;
|
||||
unsigned int headroom;
|
||||
unsigned int hlen = p->data - skb_mac_header(p);
|
||||
unsigned int len = skb->len;
|
||||
|
||||
if (hlen + p->len + skb->len >= 65536)
|
||||
if (hlen + p->len + len >= 65536)
|
||||
return -E2BIG;
|
||||
|
||||
if (skb_shinfo(p)->frag_list)
|
||||
|
@ -2651,9 +2649,9 @@ merge:
|
|||
|
||||
done:
|
||||
NAPI_GRO_CB(p)->count++;
|
||||
p->data_len += skb->len;
|
||||
p->truesize += skb->len;
|
||||
p->len += skb->len;
|
||||
p->data_len += len;
|
||||
p->truesize += len;
|
||||
p->len += len;
|
||||
|
||||
NAPI_GRO_CB(skb)->same_flow = 1;
|
||||
return 0;
|
||||
|
|
|
@ -797,6 +797,7 @@ static struct sk_buff **ipv6_gro_receive(struct sk_buff **head,
|
|||
unsigned int nlen;
|
||||
int flush = 1;
|
||||
int proto;
|
||||
__wsum csum;
|
||||
|
||||
if (unlikely(!pskb_may_pull(skb, sizeof(*iph))))
|
||||
goto out;
|
||||
|
@ -808,6 +809,7 @@ static struct sk_buff **ipv6_gro_receive(struct sk_buff **head,
|
|||
|
||||
rcu_read_lock();
|
||||
proto = ipv6_gso_pull_exthdrs(skb, iph->nexthdr);
|
||||
iph = ipv6_hdr(skb);
|
||||
IPV6_GRO_CB(skb)->proto = proto;
|
||||
ops = rcu_dereference(inet6_protos[proto]);
|
||||
if (!ops || !ops->gro_receive)
|
||||
|
@ -839,8 +841,13 @@ static struct sk_buff **ipv6_gro_receive(struct sk_buff **head,
|
|||
|
||||
NAPI_GRO_CB(skb)->flush |= flush;
|
||||
|
||||
csum = skb->csum;
|
||||
skb_postpull_rcsum(skb, iph, skb_network_header_len(skb));
|
||||
|
||||
pp = ops->gro_receive(head, skb);
|
||||
|
||||
skb->csum = csum;
|
||||
|
||||
out_unlock:
|
||||
rcu_read_unlock();
|
||||
|
||||
|
|
|
@ -1285,6 +1285,7 @@ static struct xfrm_state * pfkey_msg2xfrm_state(struct net *net,
|
|||
ext_hdrs[SADB_X_EXT_NAT_T_DPORT-1];
|
||||
natt->encap_dport = n_port->sadb_x_nat_t_port_port;
|
||||
}
|
||||
memset(&natt->encap_oa, 0, sizeof(natt->encap_oa));
|
||||
}
|
||||
|
||||
err = xfrm_init_state(x);
|
||||
|
|
|
@ -620,8 +620,8 @@ static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
|
|||
if (use_short_slot != bss_conf->use_short_slot) {
|
||||
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
|
||||
if (net_ratelimit()) {
|
||||
printk(KERN_DEBUG "%s: switched to %s slot"
|
||||
" (BSSID=%s)\n",
|
||||
printk(KERN_DEBUG "%s: switched to %s slot time"
|
||||
" (BSSID=%pM)\n",
|
||||
sdata->dev->name,
|
||||
use_short_slot ? "short" : "long",
|
||||
ifsta->bssid);
|
||||
|
|
|
@ -195,7 +195,6 @@ struct sta_ampdu_mlme {
|
|||
* @tx_packets: number of RX/TX MSDUs
|
||||
* @tx_bytes: number of bytes transmitted to this STA
|
||||
* @tx_fragments: number of transmitted MPDUs
|
||||
* @last_txrate: description of the last used transmit rate
|
||||
* @tid_seq: per-TID sequence numbers for sending to this STA
|
||||
* @ampdu_mlme: A-MPDU state machine state
|
||||
* @timer_to_tid: identity mapping to ID timers
|
||||
|
|
|
@ -1307,8 +1307,10 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|||
if (is_multicast_ether_addr(hdr->addr3))
|
||||
memcpy(hdr->addr1, hdr->addr3, ETH_ALEN);
|
||||
else
|
||||
if (mesh_nexthop_lookup(skb, osdata))
|
||||
return 0;
|
||||
if (mesh_nexthop_lookup(skb, osdata)) {
|
||||
dev_put(odev);
|
||||
return 0;
|
||||
}
|
||||
if (memcmp(odev->dev_addr, hdr->addr4, ETH_ALEN) != 0)
|
||||
IEEE80211_IFSTA_MESH_CTR_INC(&osdata->u.mesh,
|
||||
fwded_frames);
|
||||
|
|
|
@ -831,13 +831,16 @@ ctnetlink_parse_nat_setup(struct nf_conn *ct,
|
|||
if (!parse_nat_setup) {
|
||||
#ifdef CONFIG_MODULES
|
||||
rcu_read_unlock();
|
||||
spin_unlock_bh(&nf_conntrack_lock);
|
||||
nfnl_unlock();
|
||||
if (request_module("nf-nat-ipv4") < 0) {
|
||||
nfnl_lock();
|
||||
spin_lock_bh(&nf_conntrack_lock);
|
||||
rcu_read_lock();
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
nfnl_lock();
|
||||
spin_lock_bh(&nf_conntrack_lock);
|
||||
rcu_read_lock();
|
||||
if (nfnetlink_parse_nat_setup_hook)
|
||||
return -EAGAIN;
|
||||
|
|
|
@ -249,6 +249,19 @@ int sctp_rcv(struct sk_buff *skb)
|
|||
*/
|
||||
sctp_bh_lock_sock(sk);
|
||||
|
||||
if (sk != rcvr->sk) {
|
||||
/* Our cached sk is different from the rcvr->sk. This is
|
||||
* because migrate()/accept() may have moved the association
|
||||
* to a new socket and released all the sockets. So now we
|
||||
* are holding a lock on the old socket while the user may
|
||||
* be doing something with the new socket. Switch our veiw
|
||||
* of the current sk.
|
||||
*/
|
||||
sctp_bh_unlock_sock(sk);
|
||||
sk = rcvr->sk;
|
||||
sctp_bh_lock_sock(sk);
|
||||
}
|
||||
|
||||
if (sock_owned_by_user(sk)) {
|
||||
SCTP_INC_STATS_BH(SCTP_MIB_IN_PKT_BACKLOG);
|
||||
sctp_add_backlog(sk, skb);
|
||||
|
|
|
@ -324,14 +324,16 @@ append:
|
|||
switch (chunk->chunk_hdr->type) {
|
||||
case SCTP_CID_DATA:
|
||||
retval = sctp_packet_append_data(packet, chunk);
|
||||
if (SCTP_XMIT_OK != retval)
|
||||
goto finish;
|
||||
/* Disallow SACK bundling after DATA. */
|
||||
packet->has_sack = 1;
|
||||
/* Disallow AUTH bundling after DATA */
|
||||
packet->has_auth = 1;
|
||||
/* Let it be knows that packet has DATA in it */
|
||||
packet->has_data = 1;
|
||||
if (SCTP_XMIT_OK != retval)
|
||||
goto finish;
|
||||
/* timestamp the chunk for rtx purposes */
|
||||
chunk->sent_at = jiffies;
|
||||
break;
|
||||
case SCTP_CID_COOKIE_ECHO:
|
||||
packet->has_cookie_echo = 1;
|
||||
|
@ -470,7 +472,6 @@ int sctp_packet_transmit(struct sctp_packet *packet)
|
|||
} else
|
||||
chunk->resent = 1;
|
||||
|
||||
chunk->sent_at = jiffies;
|
||||
has_data = 1;
|
||||
}
|
||||
|
||||
|
|
|
@ -929,7 +929,6 @@ static int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout)
|
|||
}
|
||||
|
||||
/* Finally, transmit new packets. */
|
||||
start_timer = 0;
|
||||
while ((chunk = sctp_outq_dequeue_data(q)) != NULL) {
|
||||
/* RFC 2960 6.5 Every DATA chunk MUST carry a valid
|
||||
* stream identifier.
|
||||
|
@ -1028,7 +1027,7 @@ static int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout)
|
|||
list_add_tail(&chunk->transmitted_list,
|
||||
&transport->transmitted);
|
||||
|
||||
sctp_transport_reset_timers(transport, start_timer-1);
|
||||
sctp_transport_reset_timers(transport, 0);
|
||||
|
||||
q->empty = 0;
|
||||
|
||||
|
|
|
@ -421,6 +421,31 @@ static u32 freq_max_bandwidth(const struct ieee80211_freq_range *freq_range,
|
|||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* freq_in_rule_band - tells us if a frequency is in a frequency band
|
||||
* @freq_range: frequency rule we want to query
|
||||
* @freq_khz: frequency we are inquiring about
|
||||
*
|
||||
* This lets us know if a specific frequency rule is or is not relevant to
|
||||
* a specific frequency's band. Bands are device specific and artificial
|
||||
* definitions (the "2.4 GHz band" and the "5 GHz band"), however it is
|
||||
* safe for now to assume that a frequency rule should not be part of a
|
||||
* frequency's band if the start freq or end freq are off by more than 2 GHz.
|
||||
* This resolution can be lowered and should be considered as we add
|
||||
* regulatory rule support for other "bands".
|
||||
**/
|
||||
static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
|
||||
u32 freq_khz)
|
||||
{
|
||||
#define ONE_GHZ_IN_KHZ 1000000
|
||||
if (abs(freq_khz - freq_range->start_freq_khz) <= (2 * ONE_GHZ_IN_KHZ))
|
||||
return true;
|
||||
if (abs(freq_khz - freq_range->end_freq_khz) <= (2 * ONE_GHZ_IN_KHZ))
|
||||
return true;
|
||||
return false;
|
||||
#undef ONE_GHZ_IN_KHZ
|
||||
}
|
||||
|
||||
/* Converts a country IE to a regulatory domain. A regulatory domain
|
||||
* structure has a lot of information which the IE doesn't yet have,
|
||||
* so for the other values we use upper max values as we will intersect
|
||||
|
@ -538,6 +563,7 @@ static struct ieee80211_regdomain *country_ie_2_rd(
|
|||
|
||||
/* This time around we fill in the rd */
|
||||
while (country_ie_len >= 3) {
|
||||
int end_channel = 0;
|
||||
struct ieee80211_country_ie_triplet *triplet =
|
||||
(struct ieee80211_country_ie_triplet *) country_ie;
|
||||
struct ieee80211_reg_rule *reg_rule = NULL;
|
||||
|
@ -559,6 +585,23 @@ static struct ieee80211_regdomain *country_ie_2_rd(
|
|||
|
||||
reg_rule->flags = flags;
|
||||
|
||||
/* 2 GHz */
|
||||
if (triplet->chans.first_channel <= 14)
|
||||
end_channel = triplet->chans.first_channel +
|
||||
triplet->chans.num_channels;
|
||||
else
|
||||
/*
|
||||
* 5 GHz -- For example in country IEs if the first
|
||||
* channel given is 36 and the number of channels is 4
|
||||
* then the individual channel numbers defined for the
|
||||
* 5 GHz PHY by these parameters are: 36, 40, 44, and 48
|
||||
* and not 36, 37, 38, 39.
|
||||
*
|
||||
* See: http://tinyurl.com/11d-clarification
|
||||
*/
|
||||
end_channel = triplet->chans.first_channel +
|
||||
(4 * (triplet->chans.num_channels - 1));
|
||||
|
||||
/* The +10 is since the regulatory domain expects
|
||||
* the actual band edge, not the center of freq for
|
||||
* its start and end freqs, assuming 20 MHz bandwidth on
|
||||
|
@ -568,8 +611,7 @@ static struct ieee80211_regdomain *country_ie_2_rd(
|
|||
triplet->chans.first_channel) - 10);
|
||||
freq_range->end_freq_khz =
|
||||
MHZ_TO_KHZ(ieee80211_channel_to_frequency(
|
||||
triplet->chans.first_channel +
|
||||
triplet->chans.num_channels) + 10);
|
||||
end_channel) + 10);
|
||||
|
||||
/* Large arbitrary values, we intersect later */
|
||||
/* Increment this if we ever support >= 40 MHz channels
|
||||
|
@ -748,12 +790,23 @@ static u32 map_regdom_flags(u32 rd_flags)
|
|||
* this value to the maximum allowed bandwidth.
|
||||
* @reg_rule: the regulatory rule which we have for this frequency
|
||||
*
|
||||
* Use this function to get the regulatory rule for a specific frequency.
|
||||
* Use this function to get the regulatory rule for a specific frequency on
|
||||
* a given wireless device. If the device has a specific regulatory domain
|
||||
* it wants to follow we respect that unless a country IE has been received
|
||||
* and processed already.
|
||||
*
|
||||
* Returns 0 if it was able to find a valid regulatory rule which does
|
||||
* apply to the given center_freq otherwise it returns non-zero. It will
|
||||
* also return -ERANGE if we determine the given center_freq does not even have
|
||||
* a regulatory rule for a frequency range in the center_freq's band. See
|
||||
* freq_in_rule_band() for our current definition of a band -- this is purely
|
||||
* subjective and right now its 802.11 specific.
|
||||
*/
|
||||
static int freq_reg_info(u32 center_freq, u32 *bandwidth,
|
||||
const struct ieee80211_reg_rule **reg_rule)
|
||||
{
|
||||
int i;
|
||||
bool band_rule_found = false;
|
||||
u32 max_bandwidth = 0;
|
||||
|
||||
if (!cfg80211_regdomain)
|
||||
|
@ -767,7 +820,15 @@ static int freq_reg_info(u32 center_freq, u32 *bandwidth,
|
|||
rr = &cfg80211_regdomain->reg_rules[i];
|
||||
fr = &rr->freq_range;
|
||||
pr = &rr->power_rule;
|
||||
|
||||
/* We only need to know if one frequency rule was
|
||||
* was in center_freq's band, that's enough, so lets
|
||||
* not overwrite it once found */
|
||||
if (!band_rule_found)
|
||||
band_rule_found = freq_in_rule_band(fr, center_freq);
|
||||
|
||||
max_bandwidth = freq_max_bandwidth(fr, center_freq);
|
||||
|
||||
if (max_bandwidth && *bandwidth <= max_bandwidth) {
|
||||
*reg_rule = rr;
|
||||
*bandwidth = max_bandwidth;
|
||||
|
@ -775,23 +836,64 @@ static int freq_reg_info(u32 center_freq, u32 *bandwidth,
|
|||
}
|
||||
}
|
||||
|
||||
if (!band_rule_found)
|
||||
return -ERANGE;
|
||||
|
||||
return !max_bandwidth;
|
||||
}
|
||||
|
||||
static void handle_channel(struct ieee80211_channel *chan)
|
||||
static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
|
||||
unsigned int chan_idx)
|
||||
{
|
||||
int r;
|
||||
u32 flags = chan->orig_flags;
|
||||
u32 flags;
|
||||
u32 max_bandwidth = 0;
|
||||
const struct ieee80211_reg_rule *reg_rule = NULL;
|
||||
const struct ieee80211_power_rule *power_rule = NULL;
|
||||
struct ieee80211_supported_band *sband;
|
||||
struct ieee80211_channel *chan;
|
||||
|
||||
sband = wiphy->bands[band];
|
||||
BUG_ON(chan_idx >= sband->n_channels);
|
||||
chan = &sband->channels[chan_idx];
|
||||
|
||||
flags = chan->orig_flags;
|
||||
|
||||
r = freq_reg_info(MHZ_TO_KHZ(chan->center_freq),
|
||||
&max_bandwidth, ®_rule);
|
||||
|
||||
if (r) {
|
||||
flags |= IEEE80211_CHAN_DISABLED;
|
||||
chan->flags = flags;
|
||||
/* This means no regulatory rule was found in the country IE
|
||||
* with a frequency range on the center_freq's band, since
|
||||
* IEEE-802.11 allows for a country IE to have a subset of the
|
||||
* regulatory information provided in a country we ignore
|
||||
* disabling the channel unless at least one reg rule was
|
||||
* found on the center_freq's band. For details see this
|
||||
* clarification:
|
||||
*
|
||||
* http://tinyurl.com/11d-clarification
|
||||
*/
|
||||
if (r == -ERANGE &&
|
||||
last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) {
|
||||
#ifdef CONFIG_CFG80211_REG_DEBUG
|
||||
printk(KERN_DEBUG "cfg80211: Leaving channel %d MHz "
|
||||
"intact on %s - no rule found in band on "
|
||||
"Country IE\n",
|
||||
chan->center_freq, wiphy_name(wiphy));
|
||||
#endif
|
||||
} else {
|
||||
/* In this case we know the country IE has at least one reg rule
|
||||
* for the band so we respect its band definitions */
|
||||
#ifdef CONFIG_CFG80211_REG_DEBUG
|
||||
if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE)
|
||||
printk(KERN_DEBUG "cfg80211: Disabling "
|
||||
"channel %d MHz on %s due to "
|
||||
"Country IE\n",
|
||||
chan->center_freq, wiphy_name(wiphy));
|
||||
#endif
|
||||
flags |= IEEE80211_CHAN_DISABLED;
|
||||
chan->flags = flags;
|
||||
}
|
||||
return;
|
||||
}
|
||||
|
||||
|
@ -808,12 +910,16 @@ static void handle_channel(struct ieee80211_channel *chan)
|
|||
chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
|
||||
}
|
||||
|
||||
static void handle_band(struct ieee80211_supported_band *sband)
|
||||
static void handle_band(struct wiphy *wiphy, enum ieee80211_band band)
|
||||
{
|
||||
int i;
|
||||
unsigned int i;
|
||||
struct ieee80211_supported_band *sband;
|
||||
|
||||
BUG_ON(!wiphy->bands[band]);
|
||||
sband = wiphy->bands[band];
|
||||
|
||||
for (i = 0; i < sband->n_channels; i++)
|
||||
handle_channel(&sband->channels[i]);
|
||||
handle_channel(wiphy, band, i);
|
||||
}
|
||||
|
||||
static bool ignore_reg_update(struct wiphy *wiphy, enum reg_set_by setby)
|
||||
|
@ -840,7 +946,7 @@ void wiphy_update_regulatory(struct wiphy *wiphy, enum reg_set_by setby)
|
|||
enum ieee80211_band band;
|
||||
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
|
||||
if (wiphy->bands[band])
|
||||
handle_band(wiphy->bands[band]);
|
||||
handle_band(wiphy, band);
|
||||
if (wiphy->reg_notifier)
|
||||
wiphy->reg_notifier(wiphy, setby);
|
||||
}
|
||||
|
|
|
@ -1914,17 +1914,10 @@ static int xfrm_send_migrate(struct xfrm_selector *sel, u8 dir, u8 type,
|
|||
}
|
||||
#endif
|
||||
|
||||
/* For the xfrm_usersa_info cases we have to work around some 32-bit vs.
|
||||
* 64-bit compatability issues. On 32-bit the structure is 220 bytes, but
|
||||
* for 64-bit it gets padded out to 224 bytes. Those bytes are just
|
||||
* padding and don't have any content we care about. Therefore as long
|
||||
* as we have enough bytes for the content we can make both cases work.
|
||||
*/
|
||||
|
||||
#define XMSGSIZE(type) sizeof(struct type)
|
||||
|
||||
static const int xfrm_msg_min[XFRM_NR_MSGTYPES] = {
|
||||
[XFRM_MSG_NEWSA - XFRM_MSG_BASE] = 220, /* see above */
|
||||
[XFRM_MSG_NEWSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_info),
|
||||
[XFRM_MSG_DELSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_id),
|
||||
[XFRM_MSG_GETSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_id),
|
||||
[XFRM_MSG_NEWPOLICY - XFRM_MSG_BASE] = XMSGSIZE(xfrm_userpolicy_info),
|
||||
|
@ -1934,7 +1927,7 @@ static const int xfrm_msg_min[XFRM_NR_MSGTYPES] = {
|
|||
[XFRM_MSG_ACQUIRE - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_acquire),
|
||||
[XFRM_MSG_EXPIRE - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_expire),
|
||||
[XFRM_MSG_UPDPOLICY - XFRM_MSG_BASE] = XMSGSIZE(xfrm_userpolicy_info),
|
||||
[XFRM_MSG_UPDSA - XFRM_MSG_BASE] = 220, /* see above */
|
||||
[XFRM_MSG_UPDSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_info),
|
||||
[XFRM_MSG_POLEXPIRE - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_polexpire),
|
||||
[XFRM_MSG_FLUSHSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_flush),
|
||||
[XFRM_MSG_FLUSHPOLICY - XFRM_MSG_BASE] = 0,
|
||||
|
|
Загрузка…
Ссылка в новой задаче