microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

hwmon: (max6621) Add support for Maxim MAX6621 temperature sensor 

MAX6621 is a PECI-to-I2C translator provides an efficient, low-cost
solution for PECI-to-SMBus/I2C protocol conversion. It allows reading the
temperature from the PECI-compliant host directly from up to four
PECI-enabled CPUs.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Vadim Pasternak 2017-10-03 18:08:27 +00:00 коммит произвёл Guenter Roeck
Родитель 7a76a7f34a
Коммит 92b64580f1
3 изменённых файлов: 608 добавлений и 0 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

14
drivers/hwmon/Kconfig
Просмотреть файл

@ -862,6 +862,20 @@ tristate "MAX31722 temperature sensor"
This driver can also be built as a module. If so, the module
will be called max31722.
config SENSORS_MAX6621
tristate "Maxim MAX6621 sensor chip"
depends on I2C
select REGMAP_I2C
help
If you say yes here you get support for MAX6621 sensor chip.
MAX6621 is a PECI-to-I2C translator provides an efficient,
low-cost solution for PECI-to-SMBus/I2C protocol conversion.
It allows reading the temperature from the PECI-compliant
host directly from up to four PECI-enabled CPUs.
This driver can also be built as a module. If so, the module
will be called max6621.
config SENSORS_MAX6639
tristate "Maxim MAX6639 sensor chip"
depends on I2C

1
drivers/hwmon/Makefile
Просмотреть файл

@ -117,6 +117,7 @@ obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
obj-$(CONFIG_SENSORS_MAX1668) += max1668.o
obj-$(CONFIG_SENSORS_MAX197) += max197.o
obj-$(CONFIG_SENSORS_MAX31722) += max31722.o
obj-$(CONFIG_SENSORS_MAX6621) += max6621.o
obj-$(CONFIG_SENSORS_MAX6639) += max6639.o
obj-$(CONFIG_SENSORS_MAX6642) += max6642.o
obj-$(CONFIG_SENSORS_MAX6650) += max6650.o

593
drivers/hwmon/max6621.c Normal file
Просмотреть файл

@ -0,0 +1,593 @@
/*
* Hardware monitoring driver for Maxim MAX6621
*
* Copyright (c) 2017 Mellanox Technologies. All rights reserved.
* Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/bitops.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
#define MAX6621_DRV_NAME "max6621"
#define MAX6621_TEMP_INPUT_REG_NUM 9
#define MAX6621_TEMP_INPUT_MIN -127000
#define MAX6621_TEMP_INPUT_MAX 128000
#define MAX6621_TEMP_ALERT_CHAN_SHIFT 1
#define MAX6621_TEMP_S0D0_REG 0x00
#define MAX6621_TEMP_S0D1_REG 0x01
#define MAX6621_TEMP_S1D0_REG 0x02
#define MAX6621_TEMP_S1D1_REG 0x03
#define MAX6621_TEMP_S2D0_REG 0x04
#define MAX6621_TEMP_S2D1_REG 0x05
#define MAX6621_TEMP_S3D0_REG 0x06
#define MAX6621_TEMP_S3D1_REG 0x07
#define MAX6621_TEMP_MAX_REG 0x08
#define MAX6621_TEMP_MAX_ADDR_REG 0x0a
#define MAX6621_TEMP_ALERT_CAUSE_REG 0x0b
#define MAX6621_CONFIG0_REG 0x0c
#define MAX6621_CONFIG1_REG 0x0d
#define MAX6621_CONFIG2_REG 0x0e
#define MAX6621_CONFIG3_REG 0x0f
#define MAX6621_TEMP_S0_ALERT_REG 0x10
#define MAX6621_TEMP_S1_ALERT_REG 0x11
#define MAX6621_TEMP_S2_ALERT_REG 0x12
#define MAX6621_TEMP_S3_ALERT_REG 0x13
#define MAX6621_CLEAR_ALERT_REG 0x15
#define MAX6621_REG_MAX (MAX6621_CLEAR_ALERT_REG + 1)
#define MAX6621_REG_TEMP_SHIFT 0x06
#define MAX6621_ENABLE_TEMP_ALERTS_BIT 4
#define MAX6621_ENABLE_I2C_CRC_BIT 5
#define MAX6621_ENABLE_ALTERNATE_DATA 6
#define MAX6621_ENABLE_LOCKUP_TO 7
#define MAX6621_ENABLE_S0D0_BIT 8
#define MAX6621_ENABLE_S3D1_BIT 15
#define MAX6621_ENABLE_TEMP_ALL GENMASK(MAX6621_ENABLE_S3D1_BIT, \
MAX6621_ENABLE_S0D0_BIT)
#define MAX6621_POLL_DELAY_MASK 0x5
#define MAX6621_CONFIG0_INIT (MAX6621_ENABLE_TEMP_ALL | \
BIT(MAX6621_ENABLE_LOCKUP_TO) | \
BIT(MAX6621_ENABLE_I2C_CRC_BIT) | \
MAX6621_POLL_DELAY_MASK)
#define MAX6621_PECI_BIT_TIME 0x2
#define MAX6621_PECI_RETRY_NUM 0x3
#define MAX6621_CONFIG1_INIT ((MAX6621_PECI_BIT_TIME << 8) | \
MAX6621_PECI_RETRY_NUM)
/* Error codes */
#define MAX6621_TRAN_FAILED 0x8100 /*
* PECI transaction failed for more
* than the configured number of
* consecutive retries.
*/
#define MAX6621_POOL_DIS 0x8101 /*
* Polling disabled for requested
* socket/domain.
*/
#define MAX6621_POOL_UNCOMPLETE 0x8102 /*
* First poll not yet completed for
* requested socket/domain (on
* startup).
*/
#define MAX6621_SD_DIS 0x8103 /*
* Read maximum temperature requested,
* but no sockets/domains enabled or
* all enabled sockets/domains have
* errors; or read maximum temperature
* address requested, but read maximum
* temperature was not called.
*/
#define MAX6621_ALERT_DIS 0x8104 /*
* Get alert socket/domain requested,
* but no alert active.
*/
#define MAX6621_PECI_ERR_MIN 0x8000 /* Intel spec PECI error min value. */
#define MAX6621_PECI_ERR_MAX 0x80ff /* Intel spec PECI error max value. */
static const u32 max6621_temp_regs[] = {
MAX6621_TEMP_MAX_REG, MAX6621_TEMP_S0D0_REG, MAX6621_TEMP_S1D0_REG,
MAX6621_TEMP_S2D0_REG, MAX6621_TEMP_S3D0_REG, MAX6621_TEMP_S0D1_REG,
MAX6621_TEMP_S1D1_REG, MAX6621_TEMP_S2D1_REG, MAX6621_TEMP_S3D1_REG,
};
static const char *const max6621_temp_labels[] = {
"maximum",
"socket0_0",
"socket1_0",
"socket2_0",
"socket3_0",
"socket0_1",
"socket1_1",
"socket2_1",
"socket3_1",
};
static const int max6621_temp_alert_chan2reg[] = {
MAX6621_TEMP_S0_ALERT_REG,
MAX6621_TEMP_S1_ALERT_REG,
MAX6621_TEMP_S2_ALERT_REG,
MAX6621_TEMP_S3_ALERT_REG,
};
/**
* struct max6621_data - private data:
*
* @client: I2C client;
* @regmap: register map handle;
* @input_chan2reg: mapping from channel to register;
*/
struct max6621_data {
struct i2c_client *client;
struct regmap *regmap;
int input_chan2reg[MAX6621_TEMP_INPUT_REG_NUM + 1];
};
static long max6621_temp_mc2reg(long val)
{
return (val / 1000L) << MAX6621_REG_TEMP_SHIFT;
}
static umode_t
max6621_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr,
int channel)
{
/* Skip channels which are not physically conncted. */
if (((struct max6621_data *)data)->input_chan2reg[channel] < 0)
return 0;
switch (type) {
case hwmon_temp:
switch (attr) {
case hwmon_temp_input:
case hwmon_temp_label:
case hwmon_temp_crit_alarm:
return 0444;
case hwmon_temp_offset:
case hwmon_temp_crit:
return 0644;
default:
break;
}
default:
break;
}
return 0;
}
static int max6621_verify_reg_data(struct device *dev, int regval)
{
if (regval >= MAX6621_PECI_ERR_MIN &&
regval <= MAX6621_PECI_ERR_MAX) {
dev_dbg(dev, "PECI error code - err 0x%04x.\n",
regval);
return -EIO;
}
switch (regval) {
case MAX6621_TRAN_FAILED:
dev_dbg(dev, "PECI transaction failed - err 0x%04x.\n",
regval);
return -EIO;
case MAX6621_POOL_DIS:
dev_dbg(dev, "Polling disabled - err 0x%04x.\n", regval);
return -EOPNOTSUPP;
case MAX6621_POOL_UNCOMPLETE:
dev_dbg(dev, "First poll not completed on startup - err 0x%04x.\n",
regval);
return -EIO;
case MAX6621_SD_DIS:
dev_dbg(dev, "Resource is disabled - err 0x%04x.\n", regval);
return -EOPNOTSUPP;
case MAX6621_ALERT_DIS:
dev_dbg(dev, "No alert active - err 0x%04x.\n", regval);
return -EOPNOTSUPP;
default:
return 0;
}
}
static int
max6621_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
int channel, long *val)
{
struct max6621_data *data = dev_get_drvdata(dev);
u32 regval;
int reg;
s8 temp;
int ret;
switch (type) {
case hwmon_temp:
switch (attr) {
case hwmon_temp_input:
reg = data->input_chan2reg[channel];
ret = regmap_read(data->regmap, reg, &regval);
if (ret)
return ret;
ret = max6621_verify_reg_data(dev, regval);
if (ret)
return ret;
/*
* Bit MAX6621_REG_TEMP_SHIFT represents 1 degree step.
* The temperature is given in two's complement and 8
* bits is used for the register conversion.
*/
temp = (regval >> MAX6621_REG_TEMP_SHIFT);
*val = temp * 1000L;
break;
case hwmon_temp_offset:
ret = regmap_read(data->regmap, MAX6621_CONFIG2_REG,
&regval);
if (ret)
return ret;
ret = max6621_verify_reg_data(dev, regval);
if (ret)
return ret;
*val = (regval >> MAX6621_REG_TEMP_SHIFT) *
1000L;
break;
case hwmon_temp_crit:
channel -= MAX6621_TEMP_ALERT_CHAN_SHIFT;
reg = max6621_temp_alert_chan2reg[channel];
ret = regmap_read(data->regmap, reg, &regval);
if (ret)
return ret;
ret = max6621_verify_reg_data(dev, regval);
if (ret)
return ret;
*val = regval * 1000L;
break;
case hwmon_temp_crit_alarm:
/*
* Set val to zero to recover the case, when reading
* MAX6621_TEMP_ALERT_CAUSE_REG results in for example
* MAX6621_ALERT_DIS. Reading will return with error,
* but in such case alarm should be returned as 0.
*/
*val = 0;
ret = regmap_read(data->regmap,
MAX6621_TEMP_ALERT_CAUSE_REG,
&regval);
if (ret)
return ret;
ret = max6621_verify_reg_data(dev, regval);
if (ret) {
/* Do not report error if alert is disabled. */
if (regval == MAX6621_ALERT_DIS)
return 0;
else
return ret;
}
/*
* Clear the alert automatically, using send-byte
* smbus protocol for clearing alert.
*/
if (regval) {
ret = i2c_smbus_write_byte(data->client,
MAX6621_CLEAR_ALERT_REG);
if (!ret)
return ret;
}
*val = !!regval;
break;
default:
return -EOPNOTSUPP;
}
break;
default:
return -EOPNOTSUPP;
}
return 0;
}
static int
max6621_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
int channel, long val)
{
struct max6621_data *data = dev_get_drvdata(dev);
u32 reg;
switch (type) {
case hwmon_temp:
switch (attr) {
case hwmon_temp_offset:
/* Clamp to allowed range to prevent overflow. */
val = clamp_val(val, MAX6621_TEMP_INPUT_MIN,
MAX6621_TEMP_INPUT_MAX);
val = max6621_temp_mc2reg(val);
return regmap_write(data->regmap,
MAX6621_CONFIG2_REG, val);
case hwmon_temp_crit:
channel -= MAX6621_TEMP_ALERT_CHAN_SHIFT;
reg = max6621_temp_alert_chan2reg[channel];
/* Clamp to allowed range to prevent overflow. */
val = clamp_val(val, MAX6621_TEMP_INPUT_MIN,
MAX6621_TEMP_INPUT_MAX);
val = val / 1000L;
return regmap_write(data->regmap, reg, val);
default:
return -EOPNOTSUPP;
}
break;
default:
return -EOPNOTSUPP;
}
return -EOPNOTSUPP;
}
static int
max6621_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr,
int channel, const char **str)
{
switch (type) {
case hwmon_temp:
switch (attr) {
case hwmon_temp_label:
*str = max6621_temp_labels[channel];
return 0;
default:
return -EOPNOTSUPP;
}
break;
default:
return -EOPNOTSUPP;
}
return -EOPNOTSUPP;
}
static bool max6621_writeable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case MAX6621_CONFIG0_REG:
case MAX6621_CONFIG1_REG:
case MAX6621_CONFIG2_REG:
case MAX6621_CONFIG3_REG:
case MAX6621_TEMP_S0_ALERT_REG:
case MAX6621_TEMP_S1_ALERT_REG:
case MAX6621_TEMP_S2_ALERT_REG:
case MAX6621_TEMP_S3_ALERT_REG:
case MAX6621_TEMP_ALERT_CAUSE_REG:
return true;
}
return false;
}
static bool max6621_readable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case MAX6621_TEMP_S0D0_REG:
case MAX6621_TEMP_S0D1_REG:
case MAX6621_TEMP_S1D0_REG:
case MAX6621_TEMP_S1D1_REG:
case MAX6621_TEMP_S2D0_REG:
case MAX6621_TEMP_S2D1_REG:
case MAX6621_TEMP_S3D0_REG:
case MAX6621_TEMP_S3D1_REG:
case MAX6621_TEMP_MAX_REG:
case MAX6621_TEMP_MAX_ADDR_REG:
case MAX6621_CONFIG0_REG:
case MAX6621_CONFIG1_REG:
case MAX6621_CONFIG2_REG:
case MAX6621_CONFIG3_REG:
case MAX6621_TEMP_S0_ALERT_REG:
case MAX6621_TEMP_S1_ALERT_REG:
case MAX6621_TEMP_S2_ALERT_REG:
case MAX6621_TEMP_S3_ALERT_REG:
return true;
}
return false;
}
static bool max6621_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case MAX6621_TEMP_S0D0_REG:
case MAX6621_TEMP_S0D1_REG:
case MAX6621_TEMP_S1D0_REG:
case MAX6621_TEMP_S1D1_REG:
case MAX6621_TEMP_S2D0_REG:
case MAX6621_TEMP_S2D1_REG:
case MAX6621_TEMP_S3D0_REG:
case MAX6621_TEMP_S3D1_REG:
case MAX6621_TEMP_MAX_REG:
case MAX6621_TEMP_S0_ALERT_REG:
case MAX6621_TEMP_S1_ALERT_REG:
case MAX6621_TEMP_S2_ALERT_REG:
case MAX6621_TEMP_S3_ALERT_REG:
case MAX6621_TEMP_ALERT_CAUSE_REG:
return true;
}
return false;
}
static const struct reg_default max6621_regmap_default[] = {
{ MAX6621_CONFIG0_REG, MAX6621_CONFIG0_INIT },
{ MAX6621_CONFIG1_REG, MAX6621_CONFIG1_INIT },
};
static const struct regmap_config max6621_regmap_config = {
.reg_bits = 8,
.val_bits = 16,
.max_register = MAX6621_REG_MAX,
.val_format_endian = REGMAP_ENDIAN_LITTLE,
.cache_type = REGCACHE_FLAT,
.writeable_reg = max6621_writeable_reg,
.readable_reg = max6621_readable_reg,
.volatile_reg = max6621_volatile_reg,
.reg_defaults = max6621_regmap_default,
.num_reg_defaults = ARRAY_SIZE(max6621_regmap_default),
};
static u32 max6621_chip_config[] = {
HWMON_C_REGISTER_TZ,
0
};
static const struct hwmon_channel_info max6621_chip = {
.type = hwmon_chip,
.config = max6621_chip_config,
};
static const u32 max6621_temp_config[] = {
HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
0
};
static const struct hwmon_channel_info max6621_temp = {
.type = hwmon_temp,
.config = max6621_temp_config,
};
static const struct hwmon_channel_info *max6621_info[] = {
&max6621_chip,
&max6621_temp,
NULL
};
static const struct hwmon_ops max6621_hwmon_ops = {
.read = max6621_read,
.write = max6621_write,
.read_string = max6621_read_string,
.is_visible = max6621_is_visible,
};
static const struct hwmon_chip_info max6621_chip_info = {
.ops = &max6621_hwmon_ops,
.info = max6621_info,
};
static int max6621_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct max6621_data *data;
struct device *hwmon_dev;
int i;
int ret;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->regmap = devm_regmap_init_i2c(client, &max6621_regmap_config);
if (IS_ERR(data->regmap))
return PTR_ERR(data->regmap);
i2c_set_clientdata(client, data);
data->client = client;
/* Set CONFIG0 register masking temperature alerts and PEC. */
ret = regmap_write(data->regmap, MAX6621_CONFIG0_REG,
MAX6621_CONFIG0_INIT);
if (ret)
return ret;
/* Set CONFIG1 register for PEC access retry number. */
ret = regmap_write(data->regmap, MAX6621_CONFIG1_REG,
MAX6621_CONFIG1_INIT);
if (ret)
return ret;
/* Sync registers with hardware. */
regcache_mark_dirty(data->regmap);
ret = regcache_sync(data->regmap);
if (ret)
return ret;
/* Verify which temperature input registers are enabled. */
for (i = 0; i < MAX6621_TEMP_INPUT_REG_NUM; i++) {
ret = i2c_smbus_read_word_data(client, max6621_temp_regs[i]);
if (ret < 0)
return ret;
ret = max6621_verify_reg_data(dev, ret);
if (ret) {
data->input_chan2reg[i] = -1;
continue;
}
data->input_chan2reg[i] = max6621_temp_regs[i];
}
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
data,
&max6621_chip_info,
NULL);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
static const struct i2c_device_id max6621_id[] = {
{ MAX6621_DRV_NAME, 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, max6621_id);
static const struct of_device_id max6621_of_match[] = {
{ .compatible = "maxim,max6621" },
{ }
};
MODULE_DEVICE_TABLE(of, max6621_of_match);
static struct i2c_driver max6621_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = MAX6621_DRV_NAME,
.of_match_table = of_match_ptr(max6621_of_match),
},
.probe = max6621_probe,
.id_table = max6621_id,
};
module_i2c_driver(max6621_driver);
MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
MODULE_DESCRIPTION("Driver for Maxim MAX6621");
MODULE_LICENSE("GPL");