ASoC: wm8731: Disable the regulator when probing fails

When the driver fails during probing, the driver should disable the
regulator, not just handle it in wm8731_hw_init().

The following log reveals it:

[   17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[   17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0
[   17.824467] Call Trace:
[   17.824774]  <TASK>
[   17.825040]  regulator_bulk_free+0x82/0xe0
[   17.825514]  devres_release_group+0x319/0x3d0
[   17.825882]  i2c_device_probe+0x766/0x940
[   17.829198]  i2c_register_driver+0xb5/0x130

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Zheyu Ma 2022-04-05 20:10:38 +08:00 коммит произвёл Mark Brown
Родитель 97326be14d
Коммит 92ccbf17ee
Не найден ключ, соответствующий данной подписи
Идентификатор ключа GPG: 24D68B725D5487D0
1 изменённых файлов: 11 добавлений и 8 удалений

Просмотреть файл

@ -602,7 +602,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
ret = wm8731_reset(wm8731->regmap);
if (ret < 0) {
dev_err(dev, "Failed to issue reset: %d\n", ret);
goto err_regulator_enable;
goto err;
}
/* Clear POWEROFF, keep everything else disabled */
@ -619,10 +619,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
regcache_mark_dirty(wm8731->regmap);
err_regulator_enable:
/* Regulators will be enabled by bias management */
regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
err:
return ret;
}
@ -760,21 +757,27 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
ret = PTR_ERR(wm8731->regmap);
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
ret);
return ret;
goto err_regulator_enable;
}
ret = wm8731_hw_init(&i2c->dev, wm8731);
if (ret != 0)
return ret;
goto err_regulator_enable;
ret = devm_snd_soc_register_component(&i2c->dev,
&soc_component_dev_wm8731, &wm8731_dai, 1);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
return ret;
goto err_regulator_enable;
}
return 0;
err_regulator_enable:
/* Regulators will be enabled by bias management */
regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
return ret;
}
static const struct i2c_device_id wm8731_i2c_id[] = {