max8925_power: No temperature interrupts if temperature not connected

Brownstone does not have temperature reading circuit hooked up.
This leads to spurious interrupts.

Allow the platform layer to indicate no temperature circuit
and do not activate interrupts if no temperature control is set

Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
This commit is contained in:
Philip Rakity 2011-11-25 23:19:37 +04:00 коммит произвёл Anton Vorontsov
Родитель 9c9cf9e263
Коммит 92de378b73
2 изменённых файлов: 9 добавлений и 4 удалений

Просмотреть файл

@ -78,6 +78,7 @@ struct max8925_power_info {
unsigned batt_detect:1; /* detecing MB by ID pin */
unsigned topoff_threshold:2;
unsigned fast_charge:3;
unsigned no_temp_support:1;
int (*set_charger) (int);
};
@ -116,7 +117,7 @@ static irqreturn_t max8925_charger_handler(int irq, void *data)
case MAX8925_IRQ_VCHG_DC_F:
info->ac_online = 0;
__set_charger(info, 0);
dev_dbg(chip->dev, "Adapter is removal\n");
dev_dbg(chip->dev, "Adapter removed\n");
break;
case MAX8925_IRQ_VCHG_USB_R:
info->usb_online = 1;
@ -126,7 +127,7 @@ static irqreturn_t max8925_charger_handler(int irq, void *data)
case MAX8925_IRQ_VCHG_USB_F:
info->usb_online = 0;
__set_charger(info, 0);
dev_dbg(chip->dev, "USB is removal\n");
dev_dbg(chip->dev, "USB removed\n");
break;
case MAX8925_IRQ_VCHG_THM_OK_F:
/* Battery is not ready yet */
@ -369,8 +370,10 @@ static __devinit int max8925_init_charger(struct max8925_chip *chip,
REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_OVP, "usb-ovp");
REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_F, "usb-remove");
REQUEST_IRQ(MAX8925_IRQ_VCHG_USB_R, "usb-insert");
REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_R, "batt-temp-in-range");
REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_F, "batt-temp-out-range");
if (!info->no_temp_support) {
REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_R, "batt-temp-in-range");
REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_F, "batt-temp-out-range");
}
REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_F, "vsys-high");
REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_R, "vsys-low");
REQUEST_IRQ(MAX8925_IRQ_VCHG_RST, "charger-reset");
@ -477,6 +480,7 @@ static __devinit int max8925_power_probe(struct platform_device *pdev)
info->topoff_threshold = pdata->topoff_threshold;
info->fast_charge = pdata->fast_charge;
info->set_charger = pdata->set_charger;
info->no_temp_support = pdata->no_temp_support;
max8925_init_charger(chip, info);
return 0;

Просмотреть файл

@ -223,6 +223,7 @@ struct max8925_power_pdata {
unsigned batt_detect:1;
unsigned topoff_threshold:2;
unsigned fast_charge:3; /* charge current */
unsigned no_temp_support:1; /* set if no temperature detect */
};
/*