MIPS: OCTEON: Platform support for OCTEON III USB controller
Add all the necessary platform code to initialize the dwc3 USB host controller. This code initializes the clocks and performs a reset on the USB core and PHYs. The driver code in 'drivers/usb/dwc3' is where the real driver lives. Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Acked-by: David Daney <david.daney@cavium.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15108/ Signed-off-by: James Hogan <james.hogan@imgtec.com>
This commit is contained in:
Steven J. Hill
James Hogan
Родитель
6c356eda22
Коммит
93e502b3c2
|
|
@ -18,3 +18,4 @@ obj-y += crypto/
|
|||
obj-$(CONFIG_MTD) += flash_setup.o
|
||||
obj-$(CONFIG_SMP) += smp.o
|
||||
obj-$(CONFIG_OCTEON_ILM) += oct_ilm.o
|
||||
obj-$(CONFIG_USB) += octeon-usb.o
|
||||
|
|
|
|||
|
|
@ -448,6 +448,7 @@ static struct of_device_id __initdata octeon_ids[] = {
|
|||
{ .compatible = "cavium,octeon-3860-bootbus", },
|
||||
{ .compatible = "cavium,mdio-mux", },
|
||||
{ .compatible = "gpio-leds", },
|
||||
{ .compatible = "cavium,octeon-7130-usb-uctl", },
|
||||
{},
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,552 @@
|
|||
/*
|
||||
* XHCI HCD glue for Cavium Octeon III SOCs.
|
||||
*
|
||||
* Copyright (C) 2010-2017 Cavium Networks
|
||||
*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
#include <asm/octeon/octeon.h>
|
||||
#include <asm/octeon/cvmx-gpio-defs.h>
|
||||
|
||||
/* USB Control Register */
|
||||
union cvm_usbdrd_uctl_ctl {
|
||||
uint64_t u64;
|
||||
struct cvm_usbdrd_uctl_ctl_s {
|
||||
/* 1 = BIST and set all USB RAMs to 0x0, 0 = BIST */
|
||||
__BITFIELD_FIELD(uint64_t clear_bist:1,
|
||||
/* 1 = Start BIST and cleared by hardware */
|
||||
__BITFIELD_FIELD(uint64_t start_bist:1,
|
||||
/* Reference clock select for SuperSpeed and HighSpeed PLLs:
|
||||
* 0x0 = Both PLLs use DLMC_REF_CLK0 for reference clock
|
||||
* 0x1 = Both PLLs use DLMC_REF_CLK1 for reference clock
|
||||
* 0x2 = SuperSpeed PLL uses DLMC_REF_CLK0 for reference clock &
|
||||
* HighSpeed PLL uses PLL_REF_CLK for reference clck
|
||||
* 0x3 = SuperSpeed PLL uses DLMC_REF_CLK1 for reference clock &
|
||||
* HighSpeed PLL uses PLL_REF_CLK for reference clck
|
||||
*/
|
||||
__BITFIELD_FIELD(uint64_t ref_clk_sel:2,
|
||||
/* 1 = Spread-spectrum clock enable, 0 = SS clock disable */
|
||||
__BITFIELD_FIELD(uint64_t ssc_en:1,
|
||||
/* Spread-spectrum clock modulation range:
|
||||
* 0x0 = -4980 ppm downspread
|
||||
* 0x1 = -4492 ppm downspread
|
||||
* 0x2 = -4003 ppm downspread
|
||||
* 0x3 - 0x7 = Reserved
|
||||
*/
|
||||
__BITFIELD_FIELD(uint64_t ssc_range:3,
|
||||
/* Enable non-standard oscillator frequencies:
|
||||
* [55:53] = modules -1
|
||||
* [52:47] = 2's complement push amount, 0 = Feature disabled
|
||||
*/
|
||||
__BITFIELD_FIELD(uint64_t ssc_ref_clk_sel:9,
|
||||
/* Reference clock multiplier for non-standard frequencies:
|
||||
* 0x19 = 100MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1
|
||||
* 0x28 = 125MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1
|
||||
* 0x32 = 50MHz on DLMC_REF_CLK* if REF_CLK_SEL = 0x0 or 0x1
|
||||
* Other Values = Reserved
|
||||
*/
|
||||
__BITFIELD_FIELD(uint64_t mpll_multiplier:7,
|
||||
/* Enable reference clock to prescaler for SuperSpeed functionality.
|
||||
* Should always be set to "1"
|
||||
*/
|
||||
__BITFIELD_FIELD(uint64_t ref_ssp_en:1,
|
||||
/* Divide the reference clock by 2 before entering the
|
||||
* REF_CLK_FSEL divider:
|
||||
* If REF_CLK_SEL = 0x0 or 0x1, then only 0x0 is legal
|
||||
* If REF_CLK_SEL = 0x2 or 0x3, then:
|
||||
* 0x1 = DLMC_REF_CLK* is 125MHz
|
||||
* 0x0 = DLMC_REF_CLK* is another supported frequency
|
||||
*/
|
||||
__BITFIELD_FIELD(uint64_t ref_clk_div2:1,
|
||||
/* Select reference clock freqnuency for both PLL blocks:
|
||||
* 0x27 = REF_CLK_SEL is 0x0 or 0x1
|
||||
* 0x07 = REF_CLK_SEL is 0x2 or 0x3
|
||||
*/
|
||||
__BITFIELD_FIELD(uint64_t ref_clk_fsel:6,
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_31_31:1,
|
||||
/* Controller clock enable. */
|
||||
__BITFIELD_FIELD(uint64_t h_clk_en:1,
|
||||
/* Select bypass input to controller clock divider:
|
||||
* 0x0 = Use divided coprocessor clock from H_CLKDIV
|
||||
* 0x1 = Use clock from GPIO pins
|
||||
*/
|
||||
__BITFIELD_FIELD(uint64_t h_clk_byp_sel:1,
|
||||
/* Reset controller clock divider. */
|
||||
__BITFIELD_FIELD(uint64_t h_clkdiv_rst:1,
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_27_27:1,
|
||||
/* Clock divider select:
|
||||
* 0x0 = divide by 1
|
||||
* 0x1 = divide by 2
|
||||
* 0x2 = divide by 4
|
||||
* 0x3 = divide by 6
|
||||
* 0x4 = divide by 8
|
||||
* 0x5 = divide by 16
|
||||
* 0x6 = divide by 24
|
||||
* 0x7 = divide by 32
|
||||
*/
|
||||
__BITFIELD_FIELD(uint64_t h_clkdiv_sel:3,
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_22_23:2,
|
||||
/* USB3 port permanently attached: 0x0 = No, 0x1 = Yes */
|
||||
__BITFIELD_FIELD(uint64_t usb3_port_perm_attach:1,
|
||||
/* USB2 port permanently attached: 0x0 = No, 0x1 = Yes */
|
||||
__BITFIELD_FIELD(uint64_t usb2_port_perm_attach:1,
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_19_19:1,
|
||||
/* Disable SuperSpeed PHY: 0x0 = No, 0x1 = Yes */
|
||||
__BITFIELD_FIELD(uint64_t usb3_port_disable:1,
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_17_17:1,
|
||||
/* Disable HighSpeed PHY: 0x0 = No, 0x1 = Yes */
|
||||
__BITFIELD_FIELD(uint64_t usb2_port_disable:1,
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_15_15:1,
|
||||
/* Enable PHY SuperSpeed block power: 0x0 = No, 0x1 = Yes */
|
||||
__BITFIELD_FIELD(uint64_t ss_power_en:1,
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_13_13:1,
|
||||
/* Enable PHY HighSpeed block power: 0x0 = No, 0x1 = Yes */
|
||||
__BITFIELD_FIELD(uint64_t hs_power_en:1,
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_5_11:7,
|
||||
/* Enable USB UCTL interface clock: 0xx = No, 0x1 = Yes */
|
||||
__BITFIELD_FIELD(uint64_t csclk_en:1,
|
||||
/* Controller mode: 0x0 = Host, 0x1 = Device */
|
||||
__BITFIELD_FIELD(uint64_t drd_mode:1,
|
||||
/* PHY reset */
|
||||
__BITFIELD_FIELD(uint64_t uphy_rst:1,
|
||||
/* Software reset UAHC */
|
||||
__BITFIELD_FIELD(uint64_t uahc_rst:1,
|
||||
/* Software resets UCTL */
|
||||
__BITFIELD_FIELD(uint64_t uctl_rst:1,
|
||||
;)))))))))))))))))))))))))))))))))
|
||||
} s;
|
||||
};
|
||||
|
||||
/* UAHC Configuration Register */
|
||||
union cvm_usbdrd_uctl_host_cfg {
|
||||
uint64_t u64;
|
||||
struct cvm_usbdrd_uctl_host_cfg_s {
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_60_63:4,
|
||||
/* Indicates minimum value of all received BELT values */
|
||||
__BITFIELD_FIELD(uint64_t host_current_belt:12,
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_38_47:10,
|
||||
/* HS jitter adjustment */
|
||||
__BITFIELD_FIELD(uint64_t fla:6,
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_29_31:3,
|
||||
/* Bus-master enable: 0x0 = Disabled (stall DMAs), 0x1 = enabled */
|
||||
__BITFIELD_FIELD(uint64_t bme:1,
|
||||
/* Overcurrent protection enable: 0x0 = unavailable, 0x1 = available */
|
||||
__BITFIELD_FIELD(uint64_t oci_en:1,
|
||||
/* Overcurrent sene selection:
|
||||
* 0x0 = Overcurrent indication from off-chip is active-low
|
||||
* 0x1 = Overcurrent indication from off-chip is active-high
|
||||
*/
|
||||
__BITFIELD_FIELD(uint64_t oci_active_high_en:1,
|
||||
/* Port power control enable: 0x0 = unavailable, 0x1 = available */
|
||||
__BITFIELD_FIELD(uint64_t ppc_en:1,
|
||||
/* Port power control sense selection:
|
||||
* 0x0 = Port power to off-chip is active-low
|
||||
* 0x1 = Port power to off-chip is active-high
|
||||
*/
|
||||
__BITFIELD_FIELD(uint64_t ppc_active_high_en:1,
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_0_23:24,
|
||||
;)))))))))))
|
||||
} s;
|
||||
};
|
||||
|
||||
/* UCTL Shim Features Register */
|
||||
union cvm_usbdrd_uctl_shim_cfg {
|
||||
uint64_t u64;
|
||||
struct cvm_usbdrd_uctl_shim_cfg_s {
|
||||
/* Out-of-bound UAHC register access: 0 = read, 1 = write */
|
||||
__BITFIELD_FIELD(uint64_t xs_ncb_oob_wrn:1,
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_60_62:3,
|
||||
/* SRCID error log for out-of-bound UAHC register access:
|
||||
* [59:58] = chipID
|
||||
* [57] = Request source: 0 = core, 1 = NCB-device
|
||||
* [56:51] = Core/NCB-device number, [56] always 0 for NCB devices
|
||||
* [50:48] = SubID
|
||||
*/
|
||||
__BITFIELD_FIELD(uint64_t xs_ncb_oob_osrc:12,
|
||||
/* Error log for bad UAHC DMA access: 0 = Read log, 1 = Write log */
|
||||
__BITFIELD_FIELD(uint64_t xm_bad_dma_wrn:1,
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_44_46:3,
|
||||
/* Encoded error type for bad UAHC DMA */
|
||||
__BITFIELD_FIELD(uint64_t xm_bad_dma_type:4,
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_13_39:27,
|
||||
/* Select the IOI read command used by DMA accesses */
|
||||
__BITFIELD_FIELD(uint64_t dma_read_cmd:1,
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_10_11:2,
|
||||
/* Select endian format for DMA accesses to the L2c:
|
||||
* 0x0 = Little endian
|
||||
*` 0x1 = Big endian
|
||||
* 0x2 = Reserved
|
||||
* 0x3 = Reserved
|
||||
*/
|
||||
__BITFIELD_FIELD(uint64_t dma_endian_mode:2,
|
||||
/* Reserved */
|
||||
__BITFIELD_FIELD(uint64_t reserved_2_7:6,
|
||||
/* Select endian format for IOI CSR access to UAHC:
|
||||
* 0x0 = Little endian
|
||||
*` 0x1 = Big endian
|
||||
* 0x2 = Reserved
|
||||
* 0x3 = Reserved
|
||||
*/
|
||||
__BITFIELD_FIELD(uint64_t csr_endian_mode:2,
|
||||
;))))))))))))
|
||||
} s;
|
||||
};
|
||||
|
||||
#define OCTEON_H_CLKDIV_SEL 8
|
||||
#define OCTEON_MIN_H_CLK_RATE 150000000
|
||||
#define OCTEON_MAX_H_CLK_RATE 300000000
|
||||
|
||||
static DEFINE_MUTEX(dwc3_octeon_clocks_mutex);
|
||||
static uint8_t clk_div[OCTEON_H_CLKDIV_SEL] = {1, 2, 4, 6, 8, 16, 24, 32};
|
||||
|
||||
|
||||
static int dwc3_octeon_config_power(struct device *dev, u64 base)
|
||||
{
|
||||
#define UCTL_HOST_CFG 0xe0
|
||||
union cvm_usbdrd_uctl_host_cfg uctl_host_cfg;
|
||||
union cvmx_gpio_bit_cfgx gpio_bit;
|
||||
uint32_t gpio_pwr[3];
|
||||
int gpio, len, power_active_low;
|
||||
struct device_node *node = dev->of_node;
|
||||
int index = (base >> 24) & 1;
|
||||
|
||||
if (of_find_property(node, "power", &len) != NULL) {
|
||||
if (len == 12) {
|
||||
of_property_read_u32_array(node, "power", gpio_pwr, 3);
|
||||
power_active_low = gpio_pwr[2] & 0x01;
|
||||
gpio = gpio_pwr[1];
|
||||
} else if (len == 8) {
|
||||
of_property_read_u32_array(node, "power", gpio_pwr, 2);
|
||||
power_active_low = 0;
|
||||
gpio = gpio_pwr[1];
|
||||
} else {
|
||||
dev_err(dev, "dwc3 controller clock init failure.\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
if ((OCTEON_IS_MODEL(OCTEON_CN73XX) ||
|
||||
OCTEON_IS_MODEL(OCTEON_CNF75XX))
|
||||
&& gpio <= 31) {
|
||||
gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_BIT_CFGX(gpio));
|
||||
gpio_bit.s.tx_oe = 1;
|
||||
gpio_bit.cn73xx.output_sel = (index == 0 ? 0x14 : 0x15);
|
||||
cvmx_write_csr(CVMX_GPIO_BIT_CFGX(gpio), gpio_bit.u64);
|
||||
} else if (gpio <= 15) {
|
||||
gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_BIT_CFGX(gpio));
|
||||
gpio_bit.s.tx_oe = 1;
|
||||
gpio_bit.cn70xx.output_sel = (index == 0 ? 0x14 : 0x19);
|
||||
cvmx_write_csr(CVMX_GPIO_BIT_CFGX(gpio), gpio_bit.u64);
|
||||
} else {
|
||||
gpio_bit.u64 = cvmx_read_csr(CVMX_GPIO_XBIT_CFGX(gpio));
|
||||
gpio_bit.s.tx_oe = 1;
|
||||
gpio_bit.cn70xx.output_sel = (index == 0 ? 0x14 : 0x19);
|
||||
cvmx_write_csr(CVMX_GPIO_XBIT_CFGX(gpio), gpio_bit.u64);
|
||||
}
|
||||
|
||||
/* Enable XHCI power control and set if active high or low. */
|
||||
uctl_host_cfg.u64 = cvmx_read_csr(base + UCTL_HOST_CFG);
|
||||
uctl_host_cfg.s.ppc_en = 1;
|
||||
uctl_host_cfg.s.ppc_active_high_en = !power_active_low;
|
||||
cvmx_write_csr(base + UCTL_HOST_CFG, uctl_host_cfg.u64);
|
||||
} else {
|
||||
/* Disable XHCI power control and set if active high. */
|
||||
uctl_host_cfg.u64 = cvmx_read_csr(base + UCTL_HOST_CFG);
|
||||
uctl_host_cfg.s.ppc_en = 0;
|
||||
uctl_host_cfg.s.ppc_active_high_en = 0;
|
||||
cvmx_write_csr(base + UCTL_HOST_CFG, uctl_host_cfg.u64);
|
||||
dev_warn(dev, "dwc3 controller clock init failure.\n");
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dwc3_octeon_clocks_start(struct device *dev, u64 base)
|
||||
{
|
||||
union cvm_usbdrd_uctl_ctl uctl_ctl;
|
||||
int ref_clk_sel = 2;
|
||||
u64 div;
|
||||
u32 clock_rate;
|
||||
int mpll_mul;
|
||||
int i;
|
||||
u64 h_clk_rate;
|
||||
u64 uctl_ctl_reg = base;
|
||||
|
||||
if (dev->of_node) {
|
||||
const char *ss_clock_type;
|
||||
const char *hs_clock_type;
|
||||
|
||||
i = of_property_read_u32(dev->of_node,
|
||||
"refclk-frequency", &clock_rate);
|
||||
if (i) {
|
||||
pr_err("No UCTL \"refclk-frequency\"\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
i = of_property_read_string(dev->of_node,
|
||||
"refclk-type-ss", &ss_clock_type);
|
||||
if (i) {
|
||||
pr_err("No UCTL \"refclk-type-ss\"\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
i = of_property_read_string(dev->of_node,
|
||||
"refclk-type-hs", &hs_clock_type);
|
||||
if (i) {
|
||||
pr_err("No UCTL \"refclk-type-hs\"\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
if (strcmp("dlmc_ref_clk0", ss_clock_type) == 0) {
|
||||
if (strcmp(hs_clock_type, "dlmc_ref_clk0") == 0)
|
||||
ref_clk_sel = 0;
|
||||
else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
|
||||
ref_clk_sel = 2;
|
||||
else
|
||||
pr_err("Invalid HS clock type %s, using pll_ref_clk instead\n",
|
||||
hs_clock_type);
|
||||
} else if (strcmp(ss_clock_type, "dlmc_ref_clk1") == 0) {
|
||||
if (strcmp(hs_clock_type, "dlmc_ref_clk1") == 0)
|
||||
ref_clk_sel = 1;
|
||||
else if (strcmp(hs_clock_type, "pll_ref_clk") == 0)
|
||||
ref_clk_sel = 3;
|
||||
else {
|
||||
pr_err("Invalid HS clock type %s, using pll_ref_clk instead\n",
|
||||
hs_clock_type);
|
||||
ref_clk_sel = 3;
|
||||
}
|
||||
} else
|
||||
pr_err("Invalid SS clock type %s, using dlmc_ref_clk0 instead\n",
|
||||
ss_clock_type);
|
||||
|
||||
if ((ref_clk_sel == 0 || ref_clk_sel == 1) &&
|
||||
(clock_rate != 100000000))
|
||||
pr_err("Invalid UCTL clock rate of %u, using 100000000 instead\n",
|
||||
clock_rate);
|
||||
|
||||
} else {
|
||||
pr_err("No USB UCTL device node\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/*
|
||||
* Step 1: Wait for all voltages to be stable...that surely
|
||||
* happened before starting the kernel. SKIP
|
||||
*/
|
||||
|
||||
/* Step 2: Select GPIO for overcurrent indication, if desired. SKIP */
|
||||
|
||||
/* Step 3: Assert all resets. */
|
||||
uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
|
||||
uctl_ctl.s.uphy_rst = 1;
|
||||
uctl_ctl.s.uahc_rst = 1;
|
||||
uctl_ctl.s.uctl_rst = 1;
|
||||
cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
|
||||
|
||||
/* Step 4a: Reset the clock dividers. */
|
||||
uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
|
||||
uctl_ctl.s.h_clkdiv_rst = 1;
|
||||
cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
|
||||
|
||||
/* Step 4b: Select controller clock frequency. */
|
||||
for (div = 0; div < OCTEON_H_CLKDIV_SEL; div++) {
|
||||
h_clk_rate = octeon_get_io_clock_rate() / clk_div[div];
|
||||
if (h_clk_rate <= OCTEON_MAX_H_CLK_RATE &&
|
||||
h_clk_rate >= OCTEON_MIN_H_CLK_RATE)
|
||||
break;
|
||||
}
|
||||
uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
|
||||
uctl_ctl.s.h_clkdiv_sel = div;
|
||||
uctl_ctl.s.h_clk_en = 1;
|
||||
cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
|
||||
uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
|
||||
if ((div != uctl_ctl.s.h_clkdiv_sel) || (!uctl_ctl.s.h_clk_en)) {
|
||||
dev_err(dev, "dwc3 controller clock init failure.\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Step 4c: Deassert the controller clock divider reset. */
|
||||
uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
|
||||
uctl_ctl.s.h_clkdiv_rst = 0;
|
||||
cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
|
||||
|
||||
/* Step 5a: Reference clock configuration. */
|
||||
uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
|
||||
uctl_ctl.s.ref_clk_sel = ref_clk_sel;
|
||||
uctl_ctl.s.ref_clk_fsel = 0x07;
|
||||
uctl_ctl.s.ref_clk_div2 = 0;
|
||||
switch (clock_rate) {
|
||||
default:
|
||||
dev_err(dev, "Invalid ref_clk %u, using 100000000 instead\n",
|
||||
clock_rate);
|
||||
case 100000000:
|
||||
mpll_mul = 0x19;
|
||||
if (ref_clk_sel < 2)
|
||||
uctl_ctl.s.ref_clk_fsel = 0x27;
|
||||
break;
|
||||
case 50000000:
|
||||
mpll_mul = 0x32;
|
||||
break;
|
||||
case 125000000:
|
||||
mpll_mul = 0x28;
|
||||
break;
|
||||
}
|
||||
uctl_ctl.s.mpll_multiplier = mpll_mul;
|
||||
|
||||
/* Step 5b: Configure and enable spread-spectrum for SuperSpeed. */
|
||||
uctl_ctl.s.ssc_en = 1;
|
||||
|
||||
/* Step 5c: Enable SuperSpeed. */
|
||||
uctl_ctl.s.ref_ssp_en = 1;
|
||||
|
||||
/* Step 5d: Cofngiure PHYs. SKIP */
|
||||
|
||||
/* Step 6a & 6b: Power up PHYs. */
|
||||
uctl_ctl.s.hs_power_en = 1;
|
||||
uctl_ctl.s.ss_power_en = 1;
|
||||
cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
|
||||
|
||||
/* Step 7: Wait 10 controller-clock cycles to take effect. */
|
||||
udelay(10);
|
||||
|
||||
/* Step 8a: Deassert UCTL reset signal. */
|
||||
uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
|
||||
uctl_ctl.s.uctl_rst = 0;
|
||||
cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
|
||||
|
||||
/* Step 8b: Wait 10 controller-clock cycles. */
|
||||
udelay(10);
|
||||
|
||||
/* Steo 8c: Setup power-power control. */
|
||||
if (dwc3_octeon_config_power(dev, base)) {
|
||||
dev_err(dev, "Error configuring power.\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* Step 8d: Deassert UAHC reset signal. */
|
||||
uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
|
||||
uctl_ctl.s.uahc_rst = 0;
|
||||
cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
|
||||
|
||||
/* Step 8e: Wait 10 controller-clock cycles. */
|
||||
udelay(10);
|
||||
|
||||
/* Step 9: Enable conditional coprocessor clock of UCTL. */
|
||||
uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
|
||||
uctl_ctl.s.csclk_en = 1;
|
||||
cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
|
||||
|
||||
/*Step 10: Set for host mode only. */
|
||||
uctl_ctl.u64 = cvmx_read_csr(uctl_ctl_reg);
|
||||
uctl_ctl.s.drd_mode = 0;
|
||||
cvmx_write_csr(uctl_ctl_reg, uctl_ctl.u64);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void __init dwc3_octeon_set_endian_mode(u64 base)
|
||||
{
|
||||
#define UCTL_SHIM_CFG 0xe8
|
||||
union cvm_usbdrd_uctl_shim_cfg shim_cfg;
|
||||
|
||||
shim_cfg.u64 = cvmx_read_csr(base + UCTL_SHIM_CFG);
|
||||
#ifdef __BIG_ENDIAN
|
||||
shim_cfg.s.dma_endian_mode = 1;
|
||||
shim_cfg.s.csr_endian_mode = 1;
|
||||
#else
|
||||
shim_cfg.s.dma_endian_mode = 0;
|
||||
shim_cfg.s.csr_endian_mode = 0;
|
||||
#endif
|
||||
cvmx_write_csr(base + UCTL_SHIM_CFG, shim_cfg.u64);
|
||||
}
|
||||
|
||||
#define CVMX_USBDRDX_UCTL_CTL(index) \
|
||||
(CVMX_ADD_IO_SEG(0x0001180068000000ull) + \
|
||||
((index & 1) * 0x1000000ull))
|
||||
static void __init dwc3_octeon_phy_reset(u64 base)
|
||||
{
|
||||
union cvm_usbdrd_uctl_ctl uctl_ctl;
|
||||
int index = (base >> 24) & 1;
|
||||
|
||||
uctl_ctl.u64 = cvmx_read_csr(CVMX_USBDRDX_UCTL_CTL(index));
|
||||
uctl_ctl.s.uphy_rst = 0;
|
||||
cvmx_write_csr(CVMX_USBDRDX_UCTL_CTL(index), uctl_ctl.u64);
|
||||
}
|
||||
|
||||
static int __init dwc3_octeon_device_init(void)
|
||||
{
|
||||
const char compat_node_name[] = "cavium,octeon-7130-usb-uctl";
|
||||
struct platform_device *pdev;
|
||||
struct device_node *node;
|
||||
struct resource *res;
|
||||
void __iomem *base;
|
||||
|
||||
/*
|
||||
* There should only be three universal controllers, "uctl"
|
||||
* in the device tree. Two USB and a SATA, which we ignore.
|
||||
*/
|
||||
node = NULL;
|
||||
do {
|
||||
node = of_find_node_by_name(node, "uctl");
|
||||
if (!node)
|
||||
return -ENODEV;
|
||||
|
||||
if (of_device_is_compatible(node, compat_node_name)) {
|
||||
pdev = of_find_device_by_node(node);
|
||||
if (!pdev)
|
||||
return -ENODEV;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (res == NULL) {
|
||||
dev_err(&pdev->dev, "No memory resources\n");
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
/*
|
||||
* The code below maps in the registers necessary for
|
||||
* setting up the clocks and reseting PHYs. We must
|
||||
* release the resources so the dwc3 subsystem doesn't
|
||||
* know the difference.
|
||||
*/
|
||||
base = devm_ioremap_resource(&pdev->dev, res);
|
||||
if (IS_ERR(base))
|
||||
return PTR_ERR(base);
|
||||
|
||||
mutex_lock(&dwc3_octeon_clocks_mutex);
|
||||
dwc3_octeon_clocks_start(&pdev->dev, (u64)base);
|
||||
dwc3_octeon_set_endian_mode((u64)base);
|
||||
dwc3_octeon_phy_reset((u64)base);
|
||||
dev_info(&pdev->dev, "clocks initialized.\n");
|
||||
mutex_unlock(&dwc3_octeon_clocks_mutex);
|
||||
devm_iounmap(&pdev->dev, base);
|
||||
devm_release_mem_region(&pdev->dev, res->start,
|
||||
resource_size(res));
|
||||
}
|
||||
} while (node != NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
device_initcall(dwc3_octeon_device_init);
|
||||
|
||||
MODULE_AUTHOR("David Daney <david.daney@cavium.com>");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_DESCRIPTION("USB driver for OCTEON III SoC");
|
||||
|
|
@ -46,7 +46,8 @@ union cvmx_gpio_bit_cfgx {
|
|||
uint64_t u64;
|
||||
struct cvmx_gpio_bit_cfgx_s {
|
||||
#ifdef __BIG_ENDIAN_BITFIELD
|
||||
uint64_t reserved_17_63:47;
|
||||
uint64_t reserved_21_63:42;
|
||||
uint64_t output_sel:5;
|
||||
uint64_t synce_sel:2;
|
||||
uint64_t clk_gen:1;
|
||||
uint64_t clk_sel:2;
|
||||
|
|
@ -66,7 +67,8 @@ union cvmx_gpio_bit_cfgx {
|
|||
uint64_t clk_sel:2;
|
||||
uint64_t clk_gen:1;
|
||||
uint64_t synce_sel:2;
|
||||
uint64_t reserved_17_63:47;
|
||||
uint64_t output_sel:5;
|
||||
uint64_t reserved_21_63:42;
|
||||
#endif
|
||||
} s;
|
||||
struct cvmx_gpio_bit_cfgx_cn30xx {
|
||||
|
|
@ -126,6 +128,8 @@ union cvmx_gpio_bit_cfgx {
|
|||
struct cvmx_gpio_bit_cfgx_s cn66xx;
|
||||
struct cvmx_gpio_bit_cfgx_s cn68xx;
|
||||
struct cvmx_gpio_bit_cfgx_s cn68xxp1;
|
||||
struct cvmx_gpio_bit_cfgx_s cn70xx;
|
||||
struct cvmx_gpio_bit_cfgx_s cn73xx;
|
||||
struct cvmx_gpio_bit_cfgx_s cnf71xx;
|
||||
};
|
||||
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче