From 94037efe81d8e734e28f12b98f76a6e8005495d6 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 13 Nov 2013 13:34:18 +0200 Subject: [PATCH] HID: i2c-hid: disable interrupt on suspend When an I2C HID device is powered of during system sleep, as a result of removing its power resources (by the ACPI core) the interrupt line might go low as well. This results inadvertent interrupt and wakes the system from sleep immediately. To prevent this we disable the device interrupt in the drivers suspend method and enable it on resume. The device can still wake the system up if it is wake capable (this also means that not all of its power will be removed to keep the interrupt line high). Reported-by: Jerome Blin Signed-off-by: Mika Westerberg Signed-off-by: Jiri Kosina --- drivers/hid/i2c-hid/i2c-hid.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c index ae48d18ee315..20ab6853950e 100644 --- a/drivers/hid/i2c-hid/i2c-hid.c +++ b/drivers/hid/i2c-hid/i2c-hid.c @@ -1061,6 +1061,7 @@ static int i2c_hid_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); + disable_irq(client->irq); if (device_may_wakeup(&client->dev)) enable_irq_wake(client->irq); @@ -1075,6 +1076,7 @@ static int i2c_hid_resume(struct device *dev) int ret; struct i2c_client *client = to_i2c_client(dev); + enable_irq(client->irq); ret = i2c_hid_hwreset(client); if (ret) return ret;