hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips
Add support for Texas Instruments TMP421/422/423 temperature sensor IC. TI's TMP421/422/423 are I2C temperature sensor chips. These chips are similar to TI's TMP401/411 chips, but with reduced functionality (only temperature measurement). The chips have one local sensor and up to three (TMP423) remote sensors. Signed-off-by: Andre Prendel <andre.prendel@gmx.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
This commit is contained in:
Andre Prendel
Jean Delvare
Родитель
5bed13f580
Коммит
9410700b88
|
|
@ -814,6 +814,16 @@ config SENSORS_TMP401
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called tmp401.
|
||||
|
||||
config SENSORS_TMP421
|
||||
tristate "Texas Instruments TMP421 and compatible"
|
||||
depends on I2C && EXPERIMENTAL
|
||||
help
|
||||
If you say yes here you get support for Texas Instruments TMP421,
|
||||
TMP422 and TMP423 temperature sensor chips.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called tmp421.
|
||||
|
||||
config SENSORS_VIA686A
|
||||
tristate "VIA686A"
|
||||
depends on PCI
|
||||
|
|
|
|||
|
|
@ -84,6 +84,7 @@ obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
|
|||
obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
|
||||
obj-$(CONFIG_SENSORS_THMC50) += thmc50.o
|
||||
obj-$(CONFIG_SENSORS_TMP401) += tmp401.o
|
||||
obj-$(CONFIG_SENSORS_TMP421) += tmp421.o
|
||||
obj-$(CONFIG_SENSORS_VIA686A) += via686a.o
|
||||
obj-$(CONFIG_SENSORS_VT1211) += vt1211.o
|
||||
obj-$(CONFIG_SENSORS_VT8231) += vt8231.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,347 @@
|
|||
/* tmp421.c
|
||||
*
|
||||
* Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de>
|
||||
* Preliminary support by:
|
||||
* Melvin Rook, Raymond Ng
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Driver for the Texas Instruments TMP421 SMBus temperature sensor IC.
|
||||
* Supported models: TMP421, TMP422, TMP423
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/jiffies.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/hwmon.h>
|
||||
#include <linux/hwmon-sysfs.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/sysfs.h>
|
||||
|
||||
/* Addresses to scan */
|
||||
static unsigned short normal_i2c[] = { 0x2a, 0x4c, 0x4d, 0x4e, 0x4f,
|
||||
I2C_CLIENT_END };
|
||||
|
||||
/* Insmod parameters */
|
||||
I2C_CLIENT_INSMOD_3(tmp421, tmp422, tmp423);
|
||||
|
||||
/* The TMP421 registers */
|
||||
#define TMP421_CONFIG_REG_1 0x09
|
||||
#define TMP421_CONVERSION_RATE_REG 0x0B
|
||||
#define TMP421_MANUFACTURER_ID_REG 0xFE
|
||||
#define TMP421_DEVICE_ID_REG 0xFF
|
||||
|
||||
static const u8 TMP421_TEMP_MSB[4] = { 0x00, 0x01, 0x02, 0x03 };
|
||||
static const u8 TMP421_TEMP_LSB[4] = { 0x10, 0x11, 0x12, 0x13 };
|
||||
|
||||
/* Flags */
|
||||
#define TMP421_CONFIG_SHUTDOWN 0x40
|
||||
#define TMP421_CONFIG_RANGE 0x04
|
||||
|
||||
/* Manufacturer / Device ID's */
|
||||
#define TMP421_MANUFACTURER_ID 0x55
|
||||
#define TMP421_DEVICE_ID 0x21
|
||||
#define TMP422_DEVICE_ID 0x22
|
||||
#define TMP423_DEVICE_ID 0x23
|
||||
|
||||
static const struct i2c_device_id tmp421_id[] = {
|
||||
{ "tmp421", tmp421 },
|
||||
{ "tmp422", tmp422 },
|
||||
{ "tmp423", tmp423 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, tmp421_id);
|
||||
|
||||
struct tmp421_data {
|
||||
struct device *hwmon_dev;
|
||||
struct mutex update_lock;
|
||||
char valid;
|
||||
unsigned long last_updated;
|
||||
int kind;
|
||||
u8 config;
|
||||
s16 temp[4];
|
||||
};
|
||||
|
||||
static int temp_from_s16(s16 reg)
|
||||
{
|
||||
int temp = reg;
|
||||
|
||||
return (temp * 1000 + 128) / 256;
|
||||
}
|
||||
|
||||
static int temp_from_u16(u16 reg)
|
||||
{
|
||||
int temp = reg;
|
||||
|
||||
/* Add offset for extended temperature range. */
|
||||
temp -= 64 * 256;
|
||||
|
||||
return (temp * 1000 + 128) / 256;
|
||||
}
|
||||
|
||||
static struct tmp421_data *tmp421_update_device(struct device *dev)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
struct tmp421_data *data = i2c_get_clientdata(client);
|
||||
int i;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
|
||||
if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
|
||||
data->config = i2c_smbus_read_byte_data(client,
|
||||
TMP421_CONFIG_REG_1);
|
||||
|
||||
for (i = 0; i <= data->kind; i++) {
|
||||
data->temp[i] = i2c_smbus_read_byte_data(client,
|
||||
TMP421_TEMP_MSB[i]) << 8;
|
||||
data->temp[i] |= i2c_smbus_read_byte_data(client,
|
||||
TMP421_TEMP_LSB[i]);
|
||||
}
|
||||
data->last_updated = jiffies;
|
||||
data->valid = 1;
|
||||
}
|
||||
|
||||
mutex_unlock(&data->update_lock);
|
||||
|
||||
return data;
|
||||
}
|
||||
|
||||
static ssize_t show_temp_value(struct device *dev,
|
||||
struct device_attribute *devattr, char *buf)
|
||||
{
|
||||
int index = to_sensor_dev_attr(devattr)->index;
|
||||
struct tmp421_data *data = tmp421_update_device(dev);
|
||||
int temp;
|
||||
|
||||
mutex_lock(&data->update_lock);
|
||||
if (data->config & TMP421_CONFIG_RANGE)
|
||||
temp = temp_from_u16(data->temp[index]);
|
||||
else
|
||||
temp = temp_from_s16(data->temp[index]);
|
||||
mutex_unlock(&data->update_lock);
|
||||
|
||||
return sprintf(buf, "%d\n", temp);
|
||||
}
|
||||
|
||||
static ssize_t show_fault(struct device *dev,
|
||||
struct device_attribute *devattr, char *buf)
|
||||
{
|
||||
int index = to_sensor_dev_attr(devattr)->index;
|
||||
struct tmp421_data *data = tmp421_update_device(dev);
|
||||
|
||||
/*
|
||||
* The OPEN bit signals a fault. This is bit 0 of the temperature
|
||||
* register (low byte).
|
||||
*/
|
||||
if (data->temp[index] & 0x01)
|
||||
return sprintf(buf, "1\n");
|
||||
else
|
||||
return sprintf(buf, "0\n");
|
||||
}
|
||||
|
||||
static mode_t tmp421_is_visible(struct kobject *kobj, struct attribute *a,
|
||||
int n)
|
||||
{
|
||||
struct device *dev = container_of(kobj, struct device, kobj);
|
||||
struct tmp421_data *data = dev_get_drvdata(dev);
|
||||
struct device_attribute *devattr;
|
||||
unsigned int index;
|
||||
|
||||
devattr = container_of(a, struct device_attribute, attr);
|
||||
index = to_sensor_dev_attr(devattr)->index;
|
||||
|
||||
if (data->kind > index)
|
||||
return a->mode;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_value, NULL, 0);
|
||||
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_value, NULL, 1);
|
||||
static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_fault, NULL, 1);
|
||||
static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp_value, NULL, 2);
|
||||
static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_fault, NULL, 2);
|
||||
static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp_value, NULL, 3);
|
||||
static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_fault, NULL, 3);
|
||||
|
||||
static struct attribute *tmp421_attr[] = {
|
||||
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_input.dev_attr.attr,
|
||||
&sensor_dev_attr_temp2_fault.dev_attr.attr,
|
||||
&sensor_dev_attr_temp3_input.dev_attr.attr,
|
||||
&sensor_dev_attr_temp3_fault.dev_attr.attr,
|
||||
&sensor_dev_attr_temp4_input.dev_attr.attr,
|
||||
&sensor_dev_attr_temp4_fault.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
|
||||
static const struct attribute_group tmp421_group = {
|
||||
.attrs = tmp421_attr,
|
||||
.is_visible = tmp421_is_visible,
|
||||
};
|
||||
|
||||
static int tmp421_init_client(struct i2c_client *client)
|
||||
{
|
||||
int config, config_orig;
|
||||
|
||||
/* Set the conversion rate to 2 Hz */
|
||||
i2c_smbus_write_byte_data(client, TMP421_CONVERSION_RATE_REG, 0x05);
|
||||
|
||||
/* Start conversions (disable shutdown if necessary) */
|
||||
config = i2c_smbus_read_byte_data(client, TMP421_CONFIG_REG_1);
|
||||
if (config < 0) {
|
||||
dev_err(&client->dev, "Could not read configuration"
|
||||
" register (%d)\n", config);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
config_orig = config;
|
||||
config &= ~TMP421_CONFIG_SHUTDOWN;
|
||||
|
||||
if (config != config_orig) {
|
||||
dev_info(&client->dev, "Enable monitoring chip\n");
|
||||
i2c_smbus_write_byte_data(client, TMP421_CONFIG_REG_1, config);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int tmp421_detect(struct i2c_client *client, int kind,
|
||||
struct i2c_board_info *info)
|
||||
{
|
||||
struct i2c_adapter *adapter = client->adapter;
|
||||
const char *names[] = { "TMP421", "TMP422", "TMP423" };
|
||||
|
||||
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
||||
return -ENODEV;
|
||||
|
||||
if (kind <= 0) {
|
||||
u8 reg;
|
||||
|
||||
reg = i2c_smbus_read_byte_data(client,
|
||||
TMP421_MANUFACTURER_ID_REG);
|
||||
if (reg != TMP421_MANUFACTURER_ID)
|
||||
return -ENODEV;
|
||||
|
||||
reg = i2c_smbus_read_byte_data(client,
|
||||
TMP421_DEVICE_ID_REG);
|
||||
switch (reg) {
|
||||
case TMP421_DEVICE_ID:
|
||||
kind = tmp421;
|
||||
break;
|
||||
case TMP422_DEVICE_ID:
|
||||
kind = tmp422;
|
||||
break;
|
||||
case TMP423_DEVICE_ID:
|
||||
kind = tmp423;
|
||||
break;
|
||||
default:
|
||||
return -ENODEV;
|
||||
}
|
||||
}
|
||||
strlcpy(info->type, tmp421_id[kind - 1].name, I2C_NAME_SIZE);
|
||||
dev_info(&adapter->dev, "Detected TI %s chip at 0x%02x\n",
|
||||
names[kind - 1], client->addr);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int tmp421_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct tmp421_data *data;
|
||||
int err;
|
||||
|
||||
data = kzalloc(sizeof(struct tmp421_data), GFP_KERNEL);
|
||||
if (!data)
|
||||
return -ENOMEM;
|
||||
|
||||
i2c_set_clientdata(client, data);
|
||||
mutex_init(&data->update_lock);
|
||||
data->kind = id->driver_data;
|
||||
|
||||
err = tmp421_init_client(client);
|
||||
if (err)
|
||||
goto exit_free;
|
||||
|
||||
err = sysfs_create_group(&client->dev.kobj, &tmp421_group);
|
||||
if (err)
|
||||
goto exit_free;
|
||||
|
||||
data->hwmon_dev = hwmon_device_register(&client->dev);
|
||||
if (IS_ERR(data->hwmon_dev)) {
|
||||
err = PTR_ERR(data->hwmon_dev);
|
||||
data->hwmon_dev = NULL;
|
||||
goto exit_remove;
|
||||
}
|
||||
return 0;
|
||||
|
||||
exit_remove:
|
||||
sysfs_remove_group(&client->dev.kobj, &tmp421_group);
|
||||
|
||||
exit_free:
|
||||
i2c_set_clientdata(client, NULL);
|
||||
kfree(data);
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static int tmp421_remove(struct i2c_client *client)
|
||||
{
|
||||
struct tmp421_data *data = i2c_get_clientdata(client);
|
||||
|
||||
hwmon_device_unregister(data->hwmon_dev);
|
||||
sysfs_remove_group(&client->dev.kobj, &tmp421_group);
|
||||
|
||||
i2c_set_clientdata(client, NULL);
|
||||
kfree(data);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct i2c_driver tmp421_driver = {
|
||||
.class = I2C_CLASS_HWMON,
|
||||
.driver = {
|
||||
.name = "tmp421",
|
||||
},
|
||||
.probe = tmp421_probe,
|
||||
.remove = tmp421_remove,
|
||||
.id_table = tmp421_id,
|
||||
.detect = tmp421_detect,
|
||||
.address_data = &addr_data,
|
||||
};
|
||||
|
||||
static int __init tmp421_init(void)
|
||||
{
|
||||
return i2c_add_driver(&tmp421_driver);
|
||||
}
|
||||
|
||||
static void __exit tmp421_exit(void)
|
||||
{
|
||||
i2c_del_driver(&tmp421_driver);
|
||||
}
|
||||
|
||||
MODULE_AUTHOR("Andre Prendel <andre.prendel@gmx.de>");
|
||||
MODULE_DESCRIPTION("Texas Instruments TMP421/422/423 temperature sensor"
|
||||
" driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
module_init(tmp421_init);
|
||||
module_exit(tmp421_exit);
|
||||
Загрузка…
Ссылка в новой задаче