microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

usb: dwc3: core: introduce dwc3_core_setup_global_control() 

This little helper will be used to setup anything
related to GCTL register. There are no functional
changes, this is a cleanup only patch.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
This commit is contained in:
Felipe Balbi 2016-10-14 16:23:24 +03:00
Родитель 0759956f8a
Коммит 941f918ecf
1 изменённых файлов: 48 добавлений и 42 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

90
drivers/usb/dwc3/core.c
Просмотреть файл

@ -615,49 +615,10 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc)
return true;
}
/**
* dwc3_core_init - Low-level initialization of DWC3 Core
* @dwc: Pointer to our controller context structure
*
* Returns 0 on success otherwise negative errno.
*/
static int dwc3_core_init(struct dwc3 *dwc)
static void dwc3_core_setup_global_control(struct dwc3 *dwc)
{
u32 hwparams4 = dwc->hwparams.hwparams4;
u32 reg;
int ret;
if (!dwc3_core_is_valid(dwc)) {
dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
ret = -ENODEV;
goto err0;
}
/*
* Write Linux Version Code to our GUID register so it's easy to figure
* out which kernel version a bug was found.
*/
dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE);
/* Handle USB2.0-only core configuration */
if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
DWC3_GHWPARAMS3_SSPHY_IFC_DIS) {
if (dwc->maximum_speed == USB_SPEED_SUPER)
dwc->maximum_speed = USB_SPEED_HIGH;
}
/* issue device SoftReset too */
ret = dwc3_soft_reset(dwc);
if (ret)
goto err0;
ret = dwc3_core_soft_reset(dwc);
if (ret)
goto err0;
ret = dwc3_phy_setup(dwc);
if (ret)
goto err0;
u32 hwparams4 = dwc->hwparams.hwparams4;
u32 reg;
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
@ -726,7 +687,52 @@ static int dwc3_core_init(struct dwc3 *dwc)
reg |= DWC3_GCTL_U2RSTECN;
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
}
/**
* dwc3_core_init - Low-level initialization of DWC3 Core
* @dwc: Pointer to our controller context structure
*
* Returns 0 on success otherwise negative errno.
*/
static int dwc3_core_init(struct dwc3 *dwc)
{
u32 reg;
int ret;
if (!dwc3_core_is_valid(dwc)) {
dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
ret = -ENODEV;
goto err0;
}
/*
* Write Linux Version Code to our GUID register so it's easy to figure
* out which kernel version a bug was found.
*/
dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE);
/* Handle USB2.0-only core configuration */
if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
DWC3_GHWPARAMS3_SSPHY_IFC_DIS) {
if (dwc->maximum_speed == USB_SPEED_SUPER)
dwc->maximum_speed = USB_SPEED_HIGH;
}
/* issue device SoftReset too */
ret = dwc3_soft_reset(dwc);
if (ret)
goto err0;
ret = dwc3_core_soft_reset(dwc);
if (ret)
goto err0;
ret = dwc3_phy_setup(dwc);
if (ret)
goto err0;
dwc3_core_setup_global_control(dwc);
dwc3_core_num_eps(dwc);
ret = dwc3_setup_scratch_buffers(dwc);