iio: adxl372: Add support for I2C communication

The adxl372 is designed to communicate in either SPI or I2C protocol. It
autodetects the format being used, requiring no configuration control to
select the format.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
Stefan Popa 2018-09-04 17:12:32 +03:00 коммит произвёл Jonathan Cameron
Родитель d9e8fd0421
Коммит 94dbb46c7a
6 изменённых файлов: 76 добавлений и 1 удалений

Просмотреть файл

@ -549,6 +549,7 @@ W: http://ez.analog.com/community/linux-device-drivers
S: Supported
F: drivers/iio/accel/adxl372.c
F: drivers/iio/accel/adxl372_spi.c
F: drivers/iio/accel/adxl372_i2c.c
F: Documentation/devicetree/bindings/iio/accel/adxl372.txt
AF9013 MEDIA DRIVER

Просмотреть файл

@ -76,6 +76,17 @@ config ADXL372_SPI
To compile this driver as a module, choose M here: the
module will be called adxl372_spi.
config ADXL372_I2C
tristate "Analog Devices ADXL372 3-Axis Accelerometer I2C Driver"
depends on I2C
select ADXL372
select REGMAP_I2C
help
Say yes here to add support for the Analog Devices ADXL372 triaxial
acceleration sensor.
To compile this driver as a module, choose M here: the
module will be called adxl372_i2c.
config BMA180
tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
depends on I2C

Просмотреть файл

@ -10,6 +10,7 @@ obj-$(CONFIG_ADXL345) += adxl345_core.o
obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o
obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o
obj-$(CONFIG_ADXL372) += adxl372.o
obj-$(CONFIG_ADXL372_I2C) += adxl372_i2c.o
obj-$(CONFIG_ADXL372_SPI) += adxl372_spi.o
obj-$(CONFIG_BMA180) += bma180.o
obj-$(CONFIG_BMA220) += bma220_spi.o

Просмотреть файл

@ -26,7 +26,6 @@
#define ADXL372_DEVID 0x00
#define ADXL372_DEVID_MST 0x01
#define ADXL372_PARTID 0x02
#define ADXL372_REVID 0x03
#define ADXL372_STATUS_1 0x04
#define ADXL372_STATUS_2 0x05
#define ADXL372_FIFO_ENTRIES_2 0x06

Просмотреть файл

@ -8,6 +8,8 @@
#ifndef _ADXL372_H_
#define _ADXL372_H_
#define ADXL372_REVID 0x03
int adxl372_probe(struct device *dev, struct regmap *regmap,
int irq, const char *name);
bool adxl372_readable_noinc_reg(struct device *dev, unsigned int reg);

Просмотреть файл

@ -0,0 +1,61 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* ADXL372 3-Axis Digital Accelerometer I2C driver
*
* Copyright 2018 Analog Devices Inc.
*/
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include "adxl372.h"
static const struct regmap_config adxl372_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.readable_noinc_reg = adxl372_readable_noinc_reg,
};
static int adxl372_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct regmap *regmap;
unsigned int regval;
int ret;
regmap = devm_regmap_init_i2c(client, &adxl372_regmap_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
ret = regmap_read(regmap, ADXL372_REVID, &regval);
if (ret < 0)
return ret;
/* Starting with the 3rd revision an I2C chip bug was fixed */
if (regval < 3)
dev_warn(&client->dev,
"I2C might not work properly with other devices on the bus");
return adxl372_probe(&client->dev, regmap, client->irq, id->name);
}
static const struct i2c_device_id adxl372_i2c_id[] = {
{ "adxl372", 0 },
{}
};
MODULE_DEVICE_TABLE(i2c, adxl372_i2c_id);
static struct i2c_driver adxl372_i2c_driver = {
.driver = {
.name = "adxl372_i2c",
},
.probe = adxl372_i2c_probe,
.id_table = adxl372_i2c_id,
};
module_i2c_driver(adxl372_i2c_driver);
MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>");
MODULE_DESCRIPTION("Analog Devices ADXL372 3-axis accelerometer I2C driver");
MODULE_LICENSE("GPL");